Fix docbook fatal error:

docproc: block/blktrace.c: No such file or directory
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Some of the limit constants are used only depending on some complex
configuration dependencies, yet it's not worth making the simple
variables depend on those configuration details.  Just mark them as
perhaps not being unused, and avoid the warning.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'locking-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  lockdep: add stack dumps to asserts
  hrtimer: fix rq->lock inversion (again)

Merge branch 'kmemtrace-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'kmemtrace-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  kmemtrace: trace kfree() calls with NULL or zero-length objects
  kmemtrace: small cleanups
  kmemtrace: restore original tracing data binary format, improve ABI
  kmemtrace: kmemtrace_alloc() must fill type_id
  kmemtrace: use tracepoints
  kmemtrace, rcu: don't include unnecessary headers, allow kmemtrace w/ tracepoints
  kmemtrace, rcu: fix rcupreempt.c data structure dependencies
  kmemtrace, rcu: fix rcu_tree_trace.c data structure dependencies
  kmemtrace, rcu: fix linux/rcutree.h and linux/rcuclassic.h dependencies
  kmemtrace, mm: fix slab.h dependency problem in mm/failslab.c
  kmemtrace, kbuild: fix slab.h dependency problem in lib/decompress_unlzma.c
  kmemtrace, kbuild: fix slab.h dependency problem in lib/decompress_bunzip2.c
  kmemtrace, kbuild: fix slab.h dependency problem in lib/decompress_inflate.c
  kmemtrace, squashfs: fix slab.h dependency problem in squasfs
  kmemtrace, befs: fix slab.h dependency problem
  kmemtrace, security: fix linux/key.h header file dependencies
  kmemtrace, fs: fix linux/fdtable.h header file dependencies
  kmemtrace, fs: uninline simple_transaction_set()
  kmemtrace, fs, security: move alloc_secdata() and free_secdata() to linux/security.h

* 'for-2.6.30' of git://linux-nfs.org/~bfields/linux: (81 commits)
  nfsd41: define nfsd4_set_statp as noop for !CONFIG_NFSD_V4
  nfsd41: define NFSD_DRC_SIZE_SHIFT in set_max_drc
  nfsd41: Documentation/filesystems/nfs41-server.txt
  nfsd41: CREATE_EXCLUSIVE4_1
  nfsd41: SUPPATTR_EXCLCREAT attribute
  nfsd41: support for 3-word long attribute bitmask
  nfsd: dynamically skip encoded fattr bitmap in _nfsd4_verify
  nfsd41: pass writable attrs mask to nfsd4_decode_fattr
  nfsd41: provide support for minor version 1 at rpc level
  nfsd41: control nfsv4.1 svc via /proc/fs/nfsd/versions
  nfsd41: add OPEN4_SHARE_ACCESS_WANT nfs4_stateid bmap
  nfsd41: access_valid
  nfsd41: clientid handling
  nfsd41: check encode size for sessions maxresponse cached
  nfsd41: stateid handling
  nfsd: pass nfsd4_compound_state* to nfs4_preprocess_{state,seq}id_op
  nfsd41: destroy_session operation
  nfsd41: non-page DRC for solo sequence responses
  nfsd41: Add a create session replay cache
  nfsd41: create_session operation
  ...

* 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6:
  i2c: Delete unused i2c-algo-sgi helper module
  i2c: Delete many unused driver IDs
  i2c: Deprecate client_register and client_unregister methods

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (74 commits)
  [SCSI] sg: fix q->queue_lock on scsi_error_handler path
  [SCSI] replace __inline with inline
  [SCSI] a2091: make 2 functions static
  [SCSI] a3000: make 2 functions static
  [SCSI] ses: #if 0 the unused ses_match_host()
  [SCSI] use kmem_cache_zalloc instead of kmem_cache_alloc/memset
  [SCSI] sg: fix iovec bugs introduced by the block layer conversion
  [SCSI] qlogicpti: use request_firmware
  [SCSI] advansys: use request_firmware
  [SCSI] qla1280: use request_firmware
  [SCSI] libiscsi: fix iscsi pool error path
  [SCSI] cxgb3i: call ddp release function directly
  [SCSI] cxgb3i: merge cxgb3i_ddp into cxgb3i module
  [SCSI] cxgb3i: close all tcp connections upon chip reset
  [SCSI] cxgb3i: re-read ddp settings information after chip reset
  [SCSI] cxgb3i: re-initialize ddp settings after chip reset
  [SCSI] cxgb3i: subscribe to error notification from cxgb3 driver
  [SCSI] aacraid driver update
  [SCSI] mptsas: remove unneeded check
  [SCSI] config: Make need for SCSI_CDROM clearer
  ...

* 'for-linus' of git://git.o-hand.com/linux-rpurdie-backlight:
  backlight: Adds HP Jornada 700 series backlight driver
  backlight: Add HP Jornada 700 series LCD driver
  backlight: fix pwm_bl.c when multiple PWM backlights exist
  backlight: mbp_nvidia_bl - Add a debug switch
  backlight: Add support for MacBook 5, MacBook Air 2, and MacBook Pro 5

* 'for-linus' of git://git.o-hand.com/linux-rpurdie-leds:
  leds: introduce lp5521 led driver
  leds: just ignore invalid GPIOs in leds-gpio
  leds: Fix &&/|| confusion in leds-pca9532.c
  leds: move h1940-leds's probe function to .devinit.text
  leds: remove an unnecessary "goto" on drivers/leds/leds-s3c24.c
  leds: add BD2802GU LED driver
  leds: remove experimental flag from leds-clevo-mail
  leds: Prevent multiple LED triggers with the same name
  leds: Add gpio-led trigger
  leds: Add rb532 LED driver for the User LED
  leds: Add suspend/resume state flags to leds-gpio
  leds: simple driver for pwm driven LEDs
  leds: Fix leds-gpio driver multiple module_init/exit usage
  leds: Add dac124s085 driver
  leds: allow led-drivers to use a variable range of brightness values
  leds: Add openfirmware platform device support

Fixes following modpost error:
ERROR: "nfsd4_set_statp" [fs/nfsd/nfsd.ko] undefined!
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>

Fixes the following compiler error:
fs/nfsd/nfssvc.c: In function 'set_max_drc':
fs/nfsd/nfssvc.c:240: error: 'NFSD_DRC_SIZE_SHIFT' undeclared

CONFIG_NFSD_V4 is not set
Reported-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>

The i2c-algo-sgi code was merged into the vino driver, so we can
delete it now.
Signed-off-by: Jean Delvare <khali@linux-fr.org>

Delete many unused I2C driver IDs. We should be able to get rid of
i2c_driver.id pretty soon now.
Signed-off-by: Jean Delvare <khali@linux-fr.org>

The new i2c binding model makes the client_register and
client_unregister methods of struct i2c_adapter useless, so we can
remove them with the rest of the legacy model.
Signed-off-by: Jean Delvare <khali@linux-fr.org>

Signed-off-by: Kristoffer Ericson <kristoffer.ericson@gmail.com>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>

Signed-off-by: Kristoffer Ericson <kristoffer.ericson@gmail.com>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>

When multiple PWMs are used as backlights, the current code uses
pdev->name as the backlight name when registering, which will be
conflicting, use dev_name() instead.
Signed-off-by: Peter Edwards <sweetlilmre@gmail.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>

This patch adds a debug switch to enable (little) diagnostic
output, to help to trace down the remaining problems.
Signed-off-by: Mario Schwalbe <schwalbe@inf.tu-dresden.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>

This patch adds support for the new Apple models incorporating an Nvidia
chipset.  Apple still uses the same protocol as on older models, but the
registers moved to a different address. To do this, two sets of functions
are added for the Intel/Nvidia chipset models and passed by the DMI_MATCH
function.

The initial code has been contributed by Hu Gang <hugang@soulinfo.com>.

The driver is known to work on MacBook Pro 3, MacBook Pro 4 and MacBook
Pro 5.

Its known to work with limitations on MacBook 5 / MacBook Air 2. Changing
brightness within X doesn't work, if using Nvidia's proprietary graphics
driver with no known fix at present. Changing brightness on a text console
or using the open-source driver does work.

MacBook Pro 5 has a known bug where the initial brightness after bootup is
the last recently used brightness (in Mac OSX), while the firmware reports
maximum. Impossible to fix.

[akpm@linux-foundation.org: build fix]
[rpurdie@linux.intel.com: Rebased the patch against latest git]
Signed-off-by: Mario Schwalbe <schwalbe@inf.tu-dresden.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>

LP5521 is a three channel led driver with support
for hardware accelerated patterns (currently used
via lp5521-only sysfs interface).

Currently, it's used on n810 device.
Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>

Sometimes it's awkward to make sure that the array in the
platform_data handed to the leds-gpio driver has only valid
data ... some leds may not be always available, and coping
with that currently requires patching or rebuilding the array.

This patch fixes that by making it be OK to pass an invalid
GPIO (such as "-EINVAL") ... such table entries are skipped.

[rpurdie@linux.intel.com: adjusted to apply against other led tree changes]
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Tested-by: Diego Dompe <diego.dompe@ridgerun.com>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>

This fixes the expression in the driver to do the correct thing,
not that I think anyone would send SND_* without EV_SND.

Thanks to Roel Kluin <roel.kluin@gmail.com> for noticing.
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>

A pointer to h1940leds_probe is passed to the core via
platform_driver_register and so the function must not disappear when the
.init sections are discarded.  Otherwise (if also having HOTPLUG=y)
unbinding and binding a device to the driver via sysfs will result in an
oops as does a device being registered late.

An alternative to this patch is using platform_driver_probe instead of
platform_driver_register plus removing the pointer to the probe function
from the struct platform_driver.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>

This goto is unnecessary.
Signed-off-by: Zhenwen Xu <helight.xu@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>

ROHM BD2802GU is a RGB LED controller attached to i2c bus and specifically
engineered for decoration purposes.  This RGB controller incorporates
lighting patterns and illuminates.

This driver is designed to minimize power consumption, so when there is no
emitting LED, it enters to reset state.  And because the BD2802GU has lots
of features that can't be covered by the current LED framework, it
provides Advanced Configuration Function(ADF) mode, so that user
applications can set registers of BD2802GU directly.

Here are basic usage examples :
; to turn on LED (not blink)
$ echo 1 > /sys/class/leds/led1_R/brightness
; to blink LED
$ echo timer > /sys/class/leds/led1_R/trigger
$ echo 1 > /sys/class/leds/led1_R/delay_on
$ echo 1 > /sys/class/leds/led1_R/delay_off
; to turn off LED
$ echo 0 > /sys/class/leds/led1_R/brightness

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Kim Kyuwon <chammoru@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>

The leds-clevo-mail driver is in the mainline kernel since 2.6.25 and works
without severe problems. Make this driver available for a larger audience.
Signed-off-by: Márton Németh <nm127@freemail.hu>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>

Signed-off-by: Adam Nielsen <a.nielsen@shikadi.net>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>

The gpio led trigger will allow leds to be triggered by
gpio events.

When we give the led a gpio number, the trigger will
request_irq() on that so we don't have to keep polling
for gpio state.

It's useful for usecases as n810's keypad leds that could
be triggered by the gpio event generated when user slides
up to show the keypad.

We also provide means for userland to tell us what is the
desired brightness for that special led when it goes on
so userland could use information from ambient light sensors
and not set led brightness too high if it's not necessary.
Signed-off-by: Felipe Balbi <me@felipebalbi.com>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>

Mikrotik built six LEDs into the Routerboard 532, from which one is
destined for custom use, the so called "User LED". This patch adds a
driver for it, based on the LEDs class.
Signed-off-by: Phil Sutter <n0-1@freewrt.org>
Acked-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>

Add an option to preserve LED state when suspending/resuming to the LED
gpio driver. Based on a suggestion from Robert Jarzmik.
Tested-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>

Add a simple driver for pwm driver LEDs.  pwm_id and period can be defined
in board file.  It is developed for pxa, however it is probably generic
enough to be used on other platforms with pwm.
Signed-off-by: Luotao Fu <l.fu@pengutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>

You can't have multiple module_init()/module_exit calls so resort to messy
ifdefs potentially pending some code refactoring.
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>

Add an LED driver using the DAC124S085 DAC from NatSemi

[randy.dunlap@oracle.com: use header files for interfaces]
Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>

This patch allows drivers to override the default maximum brightness value
of 255.  We take care to preserve backwards-compatibility as much as
possible, so that user-space ABI doesn't change for existing drivers.
LED trigger code has also been updated to use the per-LED maximum.
Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>

Add bindings to support LEDs defined as of_platform devices in addition to
the existing bindings for platform devices.

New options in Kconfig allow the platform binding code and/or the
of_platform code to be turned on.  The of_platform code is of course only
available on archs that have OF support.

The existing probe and remove methods are refactored to use new functions
create_gpio_led(), to create and register one led, and delete_gpio_led(),
to unregister and free one led.  The new probe and remove methods for the
of_platform driver can then share most of the common probe and remove code
with the platform driver.

The suspend and resume methods aren't shared, but they are very short.  The
actual led driving code is the same for LEDs created by either binding.

The OF bindings are based on patch by Anton Vorontsov
<avorontsov@ru.mvista.com>.  They have been extended to allow multiple LEDs
per device.
Signed-off-by: Trent Piepho <tpiepho@freescale.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Sean MacLennan <smaclennan@pikatech.com>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>

We should now have the logic in place to handle this properly
without regressing on the write performance, so re-enable
the sync writes.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

By default, CFQ will anticipate more IO from a given io context if the
previously completed IO was sync. This used to be fine, since the only
sync IO was reads and O_DIRECT writes. But with more "normal" sync writes
being used now, we don't want to anticipate for those.

Add a bio/request flag that informs the IO scheduler that this is a sync
request that we should not idle for. Introduce WRITE_ODIRECT specifically
for O_DIRECT writes, and make sure that the other sync writes set this
flag.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

For the older SSD devices that don't do command queuing, we do want to
enable plugging to get better merging.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When you are going to be submitting several sync writes, we want to
give the IO scheduler a chance to merge some of them. Instead of
using the implicitly unplugging WRITE_SYNC variant, use WRITE_SYNC_PLUG
and rely on sync_buffer() doing the unplug when someone does a
wait_on_buffer()/lock_buffer().
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When you are going to be submitting several sync writes, we want to
give the IO scheduler a chance to merge some of them. Instead of
using the implicitly unplugging WRITE_SYNC variant, use WRITE_SYNC_PLUG
and rely on sync_buffer() doing the unplug when someone does a
wait_on_buffer()/lock_buffer().
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>