- 26 Aug, 2017 40 commits
-
-
Vinothkumar Raja authored
commit 7d1fedb6 upstream. dm_btree_find_lowest_key() is giving incorrect results. find_key() traverses the btree correctly for finding the highest key, but there is an error in the way it traverses the btree for retrieving the lowest key. dm_btree_find_lowest_key() fetches the first key of the rightmost block of the btree instead of fetching the first key from the leftmost block. Fix this by conditionally passing the correct parameter to value64() based on the @find_highest flag. Signed-off-by:
Erez Zadok <ezk@fsl.cs.sunysb.edu> Signed-off-by:
Vinothkumar Raja <vinraja@cs.stonybrook.edu> Signed-off-by:
Nidhi Panpalia <npanpalia@cs.stonybrook.edu> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
Ben Hutchings <ben@decadent.org.uk>
-
Liping Zhang authored
commit 53b56da8 upstream. After converting to use rcu for conntrack hash, one CPU may update the ct->status via ctnetlink, while another CPU may process the packets and update the ct->status. So the non-atomic operation "ct->status |= status;" via ctnetlink becomes unsafe, and this may clear the IPS_DYING_BIT bit set by another CPU unexpectedly. For example: CPU0 CPU1 ctnetlink_change_status __nf_conntrack_find_get old = ct->status nf_ct_gc_expired - nf_ct_kill - test_and_set_bit(IPS_DYING_BIT new = old | status; - ct->status = new; <-- oops, _DYING_ is cleared! Now using a series of atomic bit operation to solve the above issue. Also note, user shouldn't set IPS_TEMPLATE, IPS_SEQ_ADJUST directly, so make these two bits be unchangable too. If we set the IPS_TEMPLATE_BIT, ct will be freed by nf_ct_tmpl_free, but actually it is alloced by nf_conntrack_alloc. If we set the IPS_SEQ_ADJUST_BIT, this may cause the NULL pointer deference, as the nfct_seqadj(ct) maybe NULL. Last, add some comments to describe the logic change due to the commit a963d710 ("netfilter: ctnetlink: Fix regression in CTA_STATUS processing"), which makes me feel a little confusing. Fixes: 76507f69 ("[NETFILTER]: nf_conntrack: use RCU for conntrack hash") Signed-off-by:
Liping Zhang <zlpnobody@gmail.com> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> [bwh: Backported to 3.16: IPS_UNCHANGEABLE_MASK was not previously defined and ctnetlink_update_status() is not needed] Signed-off-by:
-
Liping Zhang authored
commit 88be4c09 upstream. Currently, ctnetlink_change_conntrack is always protected by _expect_lock, but this will cause a deadlock when deleting the helper from a conntrack, as the _expect_lock will be acquired again by nf_ct_remove_expectations: CPU0 ---- lock(nf_conntrack_expect_lock); lock(nf_conntrack_expect_lock); *** DEADLOCK *** May be due to missing lock nesting notation 2 locks held by lt-conntrack_gr/12853: #0: (&table[i].mutex){+.+.+.}, at: [<ffffffffa05e2009>] nfnetlink_rcv_msg+0x399/0x6a9 [nfnetlink] #1: (nf_conntrack_expect_lock){+.....}, at: [<ffffffffa05f2c1f>] ctnetlink_new_conntrack+0x17f/0x408 [nf_conntrack_netlink] Call Trace: dump_stack+0x85/0xc2 __lock_acquire+0x1608/0x1680 ? ctnetlink_parse_tuple_proto+0x10f/0x1c0 [nf_conntrack_netlink] lock_acquire+0x100/0x1f0 ? nf_ct_remove_expectations+0x32/0x90 [nf_conntrack] _raw_spin_lock_bh+0x3f/0x50 ? nf_ct_remove_expectations+0x32/0x90 [nf_conntrack] nf_ct_remove_expectations+0x32/0x90 [nf_conntrack] ctnetlink_change_helper+0xc6/0x190 [nf_conntrack_netlink] ctnetlink_new_conntrack+0x1b2/0x408 [nf_conntrack_netlink] nfnetlink_rcv_msg+0x60a/0x6a9 [nfnetlink] ? nfnetlink_rcv_msg+0x1b9/0x6a9 [nfnetlink] ? nfnetlink_bind+0x1a0/0x1a0 [nfnetlink] netlink_rcv_skb+0xa4/0xc0 nfnetlink_rcv+0x87/0x770 [nfnetlink] Since the operations are unrelated to nf_ct_expect, so we can drop the _expect_lock. Also note, after removing the _expect_lock protection, another CPU may invoke nf_conntrack_helper_unregister, so we should use rcu_read_lock to protect __nf_conntrack_helper_find invoked by ctnetlink_change_helper. Fixes: ca7433df ("netfilter: conntrack: seperate expect locking from nf_conntrack_lock") Signed-off-by:
-
Tyrel Datwyler authored
commit e76ca277 upstream. For CPUs present at boot each logical CPU acquires a reference to the associated device node of the core. This happens in register_cpu() which is called by topology_init(). The result of this is that we end up with a reference held by each thread of the core. However, these references are never freed if the CPU core is DLPAR removed. This patch fixes the reference leaks by acquiring and releasing the references in the CPU hotplug callbacks un/register_cpu_online(). With this patch symmetric reference counting is observed with both CPUs present at boot, and those DLPAR added after boot. Fixes: f86e4718 ("driver/core: cpu: initialize of_node in cpu's device struture") Signed-off-by:
Tyrel Datwyler <tyreld@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> [bwh: Backported to 3.16: adjust context] Signed-off-by:
-
Tyrel Datwyler authored
commit 68baf692 upstream. Historically struct device_node references were tracked using a kref embedded as a struct field. Commit 75b57ecf ("of: Make device nodes kobjects so they show up in sysfs") (Mar 2014) refactored device_nodes to be kobjects such that the device tree could by more simply exposed to userspace using sysfs. Commit 0829f6d1 ("of: device_node kobject lifecycle fixes") (Mar 2014) followed up these changes to better control the kobject lifecycle and in particular the referecne counting via of_node_get(), of_node_put(), and of_node_init(). A result of this second commit was that it introduced an of_node_put() call when a dynamic node is detached, in of_node_remove(), that removes the initial kobj reference created by of_node_init(). Traditionally as the original dynamic device node user the pseries code had assumed responsibilty for releasing this final reference in its platform specific DLPAR detach code. This patch fixes a refcount underflow introduced by commit 0829f6d1, and recently exposed by the upstreaming of the recount API. Messages like the following are no longer seen in the kernel log with this patch following DLPAR remove operations of cpus and pci devices. rpadlpar_io: slot PHB 72 removed refcount_t: underflow; use-after-free. ------------[ cut here ]------------ WARNING: CPU: 5 PID: 3335 at lib/refcount.c:128 refcount_sub_and_test+0xf4/0x110 Fixes: 0829f6d1 ("of: device_node kobject lifecycle fixes") Signed-off-by:
-
Jack Morgenstein authored
commit 99e68909 upstream. In mlx4_ib_add, procedure mlx4_ib_alloc_eqs is called to allocate EQs. However, in the mlx4_ib_add error flow, procedure mlx4_ib_free_eqs is not called to free the allocated EQs. Fixes: e605b743 ("IB/mlx4: Increase the number of vectors (EQs) available for ULPs") Signed-off-by:
Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by:
Leon Romanovsky <leon@kernel.org> Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
-
Dan Carpenter authored
commit 30260501 upstream. If skb_pad() fails then it frees skb and we don't need to free it again at the end of the function. Fixes: dc7bf5d7 ("HSI: Introduce driver for SSI Protocol") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Sebastian Reichel <sre@kernel.org> Signed-off-by:
-
Feras Daoud authored
commit 9a9b8112 upstream. Update the broadcast address in the priv->broadcast object when the Pkey value changes in index 0, otherwise the multicast GID value will keep the previous value of the PKey, and will not be updated. This leads to interface state down because the interface will keep the old PKey value. For example, in SR-IOV environment, if the PF changes the value of PKey index 0 for one of the VFs, then the VF receives PKey change event that triggers heavy flush. This flush calls update_parent_pkey that update the broadcast object and its relevant members. If in this case the multicast GID will not be updated, the interface state will be down. Fixes: c2904141 ("IPoIB: Fix pkey change flow for virtualization environments") Signed-off-by:
Feras Daoud <ferasda@mellanox.com> Signed-off-by:
Erez Shitrit <erezsh@mellanox.com> Reviewed-by:
Alex Vesker <valex@mellanox.com> Signed-off-by:
-
Benjamin Coddington authored
commit ae97aa52 upstream. Prevent a deadlock that can occur if we wait on allocations that try to write back our pages. Signed-off-by:
Benjamin Coddington <bcodding@redhat.com> Fixes: 00bfa30a ("NFS: Create a common pgio_alloc and pgio_release...") Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com> [bwh: Backported to 3.16: - Drop changes in nfs_pageio_init() - Adjust context] Signed-off-by:
-
Ashish Kalra authored
commit d594aa02 upstream. The minimum size for a new stack (512 bytes) setup for arch/x86/boot components when the bootloader does not setup/provide a stack for the early boot components is not "enough". The setup code executing as part of early kernel startup code, uses the stack beyond 512 bytes and accidentally overwrites and corrupts part of the BSS section. This is exposed mostly in the early video setup code, where it was corrupting BSS variables like force_x, force_y, which in-turn affected kernel parameters such as screen_info (screen_info.orig_video_cols) and later caused an exception/panic in console_init(). Most recent boot loaders setup the stack for early boot components, so this stack overwriting into BSS section issue has not been exposed. Signed-off-by:
Ashish Kalra <ashish@bluestacks.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20170419152015.10011-1-ashishkalra@Ashishs-MacBook-Pro.localSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Brian Norris authored
commit 3c8cb9ad upstream. Command buffers (skb's) are allocated by the main driver, and freed upon the last use. That last use is often in mwifiex_free_cmd_buffer(). In the meantime, if the command buffer gets used by the PCI driver, we map it as DMA-able, and store the mapping information in the 'cb' memory. However, if a command was in-flight when resetting the device (and therefore was still mapped), we don't get a chance to unmap this memory until after the core has cleaned up its command handling. Let's keep a refcount within the PCI driver, so we ensure the memory only gets freed after we've finished unmapping it. Noticed by KASAN when forcing a reset via: echo 1 > /sys/bus/pci/.../reset The same code path can presumably be exercised in remove() and shutdown(). [ 205.390377] mwifiex_pcie 0000:01:00.0: info: shutdown mwifiex... [ 205.400393] ================================================================== [ 205.407719] BUG: KASAN: use-after-free in mwifiex_unmap_pci_memory.isra.14+0x4c/0x100 [mwifiex_pcie] at addr ffffffc0ad471b28 [ 205.419040] Read of size 16 by task bash/1913 [ 205.423421] ============================================================================= [ 205.431625] BUG skbuff_head_cache (Tainted: G B ): kasan: bad access detected [ 205.439815] ----------------------------------------------------------------------------- [ 205.439815] [ 205.449534] INFO: Allocated in __build_skb+0x48/0x114 age=1311 cpu=4 pid=1913 [ 205.456709] alloc_debug_processing+0x124/0x178 [ 205.461282] ___slab_alloc.constprop.58+0x528/0x608 [ 205.466196] __slab_alloc.isra.54.constprop.57+0x44/0x54 [ 205.471542] kmem_cache_alloc+0xcc/0x278 [ 205.475497] __build_skb+0x48/0x114 [ 205.479019] __netdev_alloc_skb+0xe0/0x170 [ 205.483244] mwifiex_alloc_cmd_buffer+0x68/0xdc [mwifiex] [ 205.488759] mwifiex_init_fw+0x40/0x6cc [mwifiex] [ 205.493584] _mwifiex_fw_dpc+0x158/0x520 [mwifiex] [ 205.498491] mwifiex_reinit_sw+0x2c4/0x398 [mwifiex] [ 205.503510] mwifiex_pcie_reset_notify+0x114/0x15c [mwifiex_pcie] [ 205.509643] pci_reset_notify+0x5c/0x6c [ 205.513519] pci_reset_function+0x6c/0x7c [ 205.517567] reset_store+0x68/0x98 [ 205.521003] dev_attr_store+0x54/0x60 [ 205.524705] sysfs_kf_write+0x9c/0xb0 [ 205.528413] INFO: Freed in __kfree_skb+0xb0/0xbc age=131 cpu=4 pid=1913 [ 205.535064] free_debug_processing+0x264/0x370 [ 205.539550] __slab_free+0x84/0x40c [ 205.543075] kmem_cache_free+0x1c8/0x2a0 [ 205.547030] __kfree_skb+0xb0/0xbc [ 205.550465] consume_skb+0x164/0x178 [ 205.554079] __dev_kfree_skb_any+0x58/0x64 [ 205.558304] mwifiex_free_cmd_buffer+0xa0/0x158 [mwifiex] [ 205.563817] mwifiex_shutdown_drv+0x578/0x5c4 [mwifiex] [ 205.569164] mwifiex_shutdown_sw+0x178/0x310 [mwifiex] [ 205.574353] mwifiex_pcie_reset_notify+0xd4/0x15c [mwifiex_pcie] [ 205.580398] pci_reset_notify+0x5c/0x6c [ 205.584274] pci_dev_save_and_disable+0x24/0x6c [ 205.588837] pci_reset_function+0x30/0x7c [ 205.592885] reset_store+0x68/0x98 [ 205.596324] dev_attr_store+0x54/0x60 [ 205.600017] sysfs_kf_write+0x9c/0xb0 ... [ 205.800488] Call trace: [ 205.802980] [<ffffffc00020a69c>] dump_backtrace+0x0/0x190 [ 205.808415] [<ffffffc00020a96c>] show_stack+0x20/0x28 [ 205.813506] [<ffffffc0005d020c>] dump_stack+0xa4/0xcc [ 205.818598] [<ffffffc0003be44c>] print_trailer+0x158/0x168 [ 205.824120] [<ffffffc0003be5f0>] object_err+0x4c/0x5c [ 205.829210] [<ffffffc0003c45bc>] kasan_report+0x334/0x500 [ 205.834641] [<ffffffc0003c3994>] check_memory_region+0x20/0x14c [ 205.840593] [<ffffffc0003c3b14>] __asan_loadN+0x14/0x1c [ 205.845879] [<ffffffbffc46171c>] mwifiex_unmap_pci_memory.isra.14+0x4c/0x100 [mwifiex_pcie] [ 205.854282] [<ffffffbffc461864>] mwifiex_pcie_delete_cmdrsp_buf+0x94/0xa8 [mwifiex_pcie] [ 205.862421] [<ffffffbffc462028>] mwifiex_pcie_free_buffers+0x11c/0x158 [mwifiex_pcie] [ 205.870302] [<ffffffbffc4620d4>] mwifiex_pcie_down_dev+0x70/0x80 [mwifiex_pcie] [ 205.877736] [<ffffffbffc1397a8>] mwifiex_shutdown_sw+0x190/0x310 [mwifiex] [ 205.884658] [<ffffffbffc4606b4>] mwifiex_pcie_reset_notify+0xd4/0x15c [mwifiex_pcie] [ 205.892446] [<ffffffc000635f54>] pci_reset_notify+0x5c/0x6c [ 205.898048] [<ffffffc00063a044>] pci_dev_save_and_disable+0x24/0x6c [ 205.904350] [<ffffffc00063cf0c>] pci_reset_function+0x30/0x7c [ 205.910134] [<ffffffc000641118>] reset_store+0x68/0x98 [ 205.915312] [<ffffffc000771588>] dev_attr_store+0x54/0x60 [ 205.920750] [<ffffffc00046f53c>] sysfs_kf_write+0x9c/0xb0 [ 205.926182] [<ffffffc00046dfb0>] kernfs_fop_write+0x184/0x1f8 [ 205.931963] [<ffffffc0003d64f4>] __vfs_write+0x6c/0x17c [ 205.937221] [<ffffffc0003d7164>] vfs_write+0xf0/0x1c4 [ 205.942310] [<ffffffc0003d7da0>] SyS_write+0x78/0xd8 [ 205.947312] [<ffffffc000204634>] el0_svc_naked+0x24/0x28 ... [ 205.998268] ================================================================== This bug has been around in different forms for a while. It was sort of noticed in commit 955ab095 ("mwifiex: Do not kfree cmd buf while unregistering PCIe"), but it just fixed the double-free, without acknowledging the potential for use-after-free. Fixes: fc331460 ("mwifiex: use pci_alloc/free_consistent APIs for PCIe") Signed-off-by:
Brian Norris <briannorris@chromium.org> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> [bwh: Backported to 3.16: adjust filename] Signed-off-by:
-
Peter Chen authored
commit 6fc091fb upstream. Print correct command ring address using 'val_64'. Signed-off-by:
Peter Chen <peter.chen@nxp.com> Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Andrew Jones authored
commit 6c7a5dce upstream. Fix potential races in kvm_psci_vcpu_on() by taking the kvm->lock mutex. In general, it's a bad idea to allow more than one PSCI_CPU_ON to process the same target VCPU at the same time. One such problem that may arise is that one PSCI_CPU_ON could be resetting the target vcpu, which fills the entire sys_regs array with a temporary value including the MPIDR register, while another looks up the VCPU based on the MPIDR value, resulting in no target VCPU found. Resolves both races found with the kvm-unit-tests/arm/psci unit test. Reviewed-by:
Marc Zyngier <marc.zyngier@arm.com> Reviewed-by:
Christoffer Dall <cdall@linaro.org> Reported-by:
Levente Kurusa <lkurusa@redhat.com> Suggested-by:
Andrew Jones <drjones@redhat.com> Signed-off-by:
-
Dan Carpenter authored
commit b7dcf68f upstream. The > should be >= or we read one space beyond the end of the array. Fixes: ab5c4f71 ("ath9k: allow to load EEPROM content via firmware API") Signed-off-by:
Kalle Valo <kvalo@qca.qualcomm.com> [bwh: Backported to 3.16: adjust context] Signed-off-by:
-
Frank Schaefer authored
commit 7f140fc2 upstream. Enabling vflip currently causes wrong colors. It seems that (at least with the current sensor setup) REG04_VFLIP_IMG only changes the vertical readout direction. Because pixels are arranged RGRG... in odd lines and GBGB... in even lines, either a one line shift or even/odd line swap is required, too, but apparently this doesn't happen. I finally figured out that this can be done manually by setting REG04_VREF_EN. Looking at hflip, it turns out that bit REG04_HREF_EN is set there permanetly, but according to my tests has no effect on the pixel readout order. So my conclusion is that the current documentation of sensor register 0x04 is wrong (has changed after preliminary datasheet version 2.2). I'm pretty sure that automatic vertical line shift/switch can be enabled, too, but until anyone finds ot how this works, we have to stick with manual switching. Signed-off-by:
Frank Schäfer <fschaefer.oss@googlemail.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com> [bwh: Backported to 3.16: adjust filename] Signed-off-by:
-
Alyssa Milburn authored
commit 950e252c upstream. Otherwise the i2c transfer functions can read or write beyond the end of stack or heap buffers. Signed-off-by:
Alyssa Milburn <amilburn@zall.org> Signed-off-by:
-
Alyssa Milburn authored
commit a12b8ab8 upstream. Otherwise ttusb2_i2c_xfer can read or write beyond the end of static and heap buffers. Signed-off-by:
-
Marek Vasut authored
commit 31c5d192 upstream. This development kit has an FT4232 on it with a custom USB VID/PID. The FT4232 provides four UARTs, but only two are used. The UART 0 is used by the FlashPro5 programmer and UART 2 is connected to the SmartFusion2 CortexM3 SoC UART port. Note that the USB VID is registered to Actel according to Linux USB VID database, but that was acquired by Microsemi. Signed-off-by:
Marek Vasut <marex@denx.de> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Lukas Wunner authored
commit ea00353f upstream. Laurent Pinchart reported that the Renesas R-Car H2 Lager board (r8a7790) crashes during suspend tests. Geert Uytterhoeven managed to reproduce the issue on an M2-W Koelsch board (r8a7791): It occurs when the PME scan runs, once per second. During PME scan, the PCI host bridge (rcar-pci) registers are accessed while its module clock has already been disabled, leading to the crash. One reproducer is to configure s2ram to use "s2idle" instead of "deep" suspend: # echo 0 > /sys/module/printk/parameters/console_suspend # echo s2idle > /sys/power/mem_sleep # echo mem > /sys/power/state Another reproducer is to write either "platform" or "processors" to /sys/power/pm_test. It does not (or is less likely) to happen during full system suspend ("core" or "none") because system suspend also disables timers, and thus the workqueue handling PME scans no longer runs. Geert believes the issue may still happen in the small window between disabling module clocks and disabling timers: # echo 0 > /sys/module/printk/parameters/console_suspend # echo platform > /sys/power/pm_test # Or "processors" # echo mem > /sys/power/state (Make sure CONFIG_PCI_RCAR_GEN2 and CONFIG_USB_OHCI_HCD_PCI are enabled.) Rafael Wysocki agrees that PME scans should be suspended before the host bridge registers become inaccessible. To that end, queue the task on a workqueue that gets frozen before devices suspend. Rafael notes however that as a result, some wakeup events may be missed if they are delivered via PME from a device without working IRQ (which hence must be polled) and occur after the workqueue has been frozen. If that turns out to be an issue in practice, it may be possible to solve it by calling pci_pme_list_scan() once directly from one of the host bridge's pm_ops callbacks. Stacktrace for posterity: PM: Syncing filesystems ... [ 38.566237] done. PM: Preparing system for sleep (mem) Freezing user space processes ... [ 38.579813] (elapsed 0.001 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. PM: Suspending system (mem) PM: suspend of devices complete after 152.456 msecs PM: late suspend of devices complete after 2.809 msecs PM: noirq suspend of devices complete after 29.863 msecs suspend debug: Waiting for 5 second(s). Unhandled fault: asynchronous external abort (0x1211) at 0x00000000 pgd = c0003000 [00000000] *pgd=80000040004003, *pmd=00000000 Internal error: : 1211 [#1] SMP ARM Modules linked in: CPU: 1 PID: 20 Comm: kworker/1:1 Not tainted 4.9.0-rc1-koelsch-00011-g68db9bc8 #3383 Hardware name: Generic R8A7791 (Flattened Device Tree) Workqueue: events pci_pme_list_scan task: eb56e140 task.stack: eb58e000 PC is at pci_generic_config_read+0x64/0x6c LR is at rcar_pci_cfg_base+0x64/0x84 pc : [<c041d7b4>] lr : [<c04309a0>] psr: 600d0093 sp : eb58fe98 ip : c041d750 fp : 00000008 r10: c0e2283c r9 : 00000000 r8 : 600d0013 r7 : 00000008 r6 : eb58fed6 r5 : 00000002 r4 : eb58feb4 r3 : 00000000 r2 : 00000044 r1 : 00000008 r0 : 00000000 Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user Control: 30c5387d Table: 6a9f6c80 DAC: 55555555 Process kworker/1:1 (pid: 20, stack limit = 0xeb58e210) Stack: (0xeb58fe98 to 0xeb590000) fe80: 00000002 00000044 fea0: eb6f5800 c041d9b0 eb58feb4 00000008 00000044 00000000 eb78a000 eb78a000 fec0: 00000044 00000000 eb9aff00 c0424bf0 eb78a000 00000000 eb78a000 c0e22830 fee0: ea8a6fc0 c0424c5c eaae79c0 c0424ce0 eb55f380 c0e22838 eb9a9800 c0235fbc ff00: eb55f380 c0e22838 eb55f380 eb9a9800 eb9a9800 eb58e000 eb9a9824 c0e02100 ff20: eb55f398 c02366c4 eb56e140 eb5631c0 00000000 eb55f380 c023641c 00000000 ff40: 00000000 00000000 00000000 c023a928 cd105598 00000000 40506a34 eb55f380 ff60: 00000000 00000000 dead4ead ffffffff ffffffff eb58ff74 eb58ff74 00000000 ff80: 00000000 dead4ead ffffffff ffffffff eb58ff90 eb58ff90 eb58ffac eb5631c0 ffa0: c023a844 00000000 00000000 c0206d68 00000000 00000000 00000000 00000000 ffc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ffe0: 00000000 00000000 00000000 00000000 00000013 00000000 3a81336c 10ccd1dd [<c041d7b4>] (pci_generic_config_read) from [<c041d9b0>] (pci_bus_read_config_word+0x58/0x80) [<c041d9b0>] (pci_bus_read_config_word) from [<c0424bf0>] (pci_check_pme_status+0x34/0x78) [<c0424bf0>] (pci_check_pme_status) from [<c0424c5c>] (pci_pme_wakeup+0x28/0x54) [<c0424c5c>] (pci_pme_wakeup) from [<c0424ce0>] (pci_pme_list_scan+0x58/0xb4) [<c0424ce0>] (pci_pme_list_scan) from [<c0235fbc>] (process_one_work+0x1bc/0x308) [<c0235fbc>] (process_one_work) from [<c02366c4>] (worker_thread+0x2a8/0x3e0) [<c02366c4>] (worker_thread) from [<c023a928>] (kthread+0xe4/0xfc) [<c023a928>] (kthread) from [<c0206d68>] (ret_from_fork+0x14/0x2c) Code: ea000000 e5903000 f57ff04f e3a00000 (e5843000) ---[ end trace 667d43ba3aa9e589 ]--- Fixes: df17e62e ("PCI: Add support for polling PME state on suspended legacy PCI devices") Reported-and-tested-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reported-and-tested-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
Lukas Wunner <lukas@wunner.de> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Cc: Simon Horman <horms+renesas@verge.net.au> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Signed-off-by:
-
David Woodhouse authored
commit cef4d023 upstream. The /proc/bus/pci mmap interface allows the user to specify whether they want WC or not. Don't let them do so on non-prefetchable BARs. Signed-off-by:
David Woodhouse <dwmw@amazon.co.uk> Signed-off-by:
-
David Woodhouse authored
commit 17caf567 upstream. Don't match MMIO maps with I/O BARs and vice versa. Signed-off-by:
-
Bjorn Helgaas authored
commit 3a92c319 upstream. PCI exposes files like /proc/bus/pci/00/00.0 in procfs. These files support operations like this: ioctl(fd, PCIIOC_MMAP_IS_IO); # request I/O port space ioctl(fd, PCIIOC_WRITE_COMBINE, 1); # request write-combining mmap(fd, ...) Write combining is useful on PCI memory space, but I don't think it makes sense on PCI I/O port space. We *could* change proc_bus_pci_ioctl() to make it impossible to set mmap_state == pci_mmap_io and write_combine at the same time, but that would break the following sequence, which is currently legal: mmap(fd, ...) # default is I/O, non-combining ioctl(fd, PCIIOC_WRITE_COMBINE, 1); # request write-combining ioctl(fd, PCIIOC_MMAP_IS_MEM); # request memory space mmap(fd, ...) # get write-combining mapping Ignore the write-combining flag when mapping I/O port space. This patch should have no functional effect, based on this analysis of all implementations of pci_mmap_page_range(): - ia64 mips parisc sh unicore32 x86 do not support mapping of I/O port space at all. - arm cris microblaze mn10300 sparc xtensa support mapping of I/O port space, but ignore the write_combine argument to pci_mmap_page_range(). - powerpc supports mapping of I/O port space and uses write_combine, and it disables write combining for I/O port space in __pci_mmap_set_pgprot(). This patch makes it possible to remove __pci_mmap_set_pgprot() from powerpc, which simplifies that path. Signed-off-by:
-
Richard Cochran authored
commit c90722b5 upstream. Commit 43530b69 ("regulator: Use regmap_read/write(), regmap_update_bits functions directly") intended to replace working inline helper functions with standard regmap calls. However, it also inverted the set/clear logic of the "CORE ADJ Allowed" bit. That patch was clearly never tested, since without that bit cleared, the core VDCDC1 voltage output does not react to I2C configuration changes. This patch fixes the issue by clearing the bit as in the original, correct implementation. Note for stable back porting that, due to subsequent driver churn, this patch will not apply on every kernel version. Fixes: 43530b69 ("regulator: Use regmap_read/write(), regmap_update_bits functions directly") Signed-off-by:
Richard Cochran <rcochran@linutronix.de> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Alyssa Milburn authored
commit ee0fe833 upstream. This code copies actual_length-128 bytes from the header, which will underflow if the received buffer is too small. Signed-off-by:
-
Alyssa Milburn authored
commit 821117dc upstream. Return an error rather than memcpy()ing beyond the end of the buffer. Internal callers use appropriate sizes, but digitv_i2c_xfer may not. Signed-off-by:
-
David Ahern authored
commit 4a6e3c5d upstream. ndisc_notify is the ipv6 equivalent to arp_notify. When arp_notify is set to 1, gratuitous arp requests are sent when the device is brought up. The same is expected when ndisc_notify is set to 1 (per ndisc_notify in Documentation/networking/ip-sysctl.txt). The NA is not sent on NETDEV_UP event; add it. Fixes: 5cb04436 ("ipv6: add knob to send unsolicited ND on link-layer address change") Signed-off-by:
David Ahern <dsa@cumulusnetworks.com> Acked-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Steven Rostedt (VMware) authored
commit 82cc4fc2 upstream. When two function probes are added to set_ftrace_filter, and then one of them is removed, the update to the function locations is not performed, and the record keeping of the function states are corrupted, and causes an ftrace_bug() to occur. This is easily reproducable by adding two probes, removing one, and then adding it back again. # cd /sys/kernel/debug/tracing # echo schedule:traceoff > set_ftrace_filter # echo do_IRQ:traceoff > set_ftrace_filter # echo \!do_IRQ:traceoff > /debug/tracing/set_ftrace_filter # echo do_IRQ:traceoff > set_ftrace_filter Causes: ------------[ cut here ]------------ WARNING: CPU: 2 PID: 1098 at kernel/trace/ftrace.c:2369 ftrace_get_addr_curr+0x143/0x220 Modules linked in: [...] CPU: 2 PID: 1098 Comm: bash Not tainted 4.10.0-test+ #405 Hardware name: Hewlett-Packard HP Compaq Pro 6300 SFF/339A, BIOS K01 v02.05 05/07/2012 Call Trace: dump_stack+0x68/0x9f __warn+0x111/0x130 ? trace_irq_work_interrupt+0xa0/0xa0 warn_slowpath_null+0x1d/0x20 ftrace_get_addr_curr+0x143/0x220 ? __fentry__+0x10/0x10 ftrace_replace_code+0xe3/0x4f0 ? ftrace_int3_handler+0x90/0x90 ? printk+0x99/0xb5 ? 0xffffffff81000000 ftrace_modify_all_code+0x97/0x110 arch_ftrace_update_code+0x10/0x20 ftrace_run_update_code+0x1c/0x60 ftrace_run_modify_code.isra.48.constprop.62+0x8e/0xd0 register_ftrace_function_probe+0x4b6/0x590 ? ftrace_startup+0x310/0x310 ? debug_lockdep_rcu_enabled.part.4+0x1a/0x30 ? update_stack_state+0x88/0x110 ? ftrace_regex_write.isra.43.part.44+0x1d3/0x320 ? preempt_count_sub+0x18/0xd0 ? mutex_lock_nested+0x104/0x800 ? ftrace_regex_write.isra.43.part.44+0x1d3/0x320 ? __unwind_start+0x1c0/0x1c0 ? _mutex_lock_nest_lock+0x800/0x800 ftrace_trace_probe_callback.isra.3+0xc0/0x130 ? func_set_flag+0xe0/0xe0 ? __lock_acquire+0x642/0x1790 ? __might_fault+0x1e/0x20 ? trace_get_user+0x398/0x470 ? strcmp+0x35/0x60 ftrace_trace_onoff_callback+0x48/0x70 ftrace_regex_write.isra.43.part.44+0x251/0x320 ? match_records+0x420/0x420 ftrace_filter_write+0x2b/0x30 __vfs_write+0xd7/0x330 ? do_loop_readv_writev+0x120/0x120 ? locks_remove_posix+0x90/0x2f0 ? do_lock_file_wait+0x160/0x160 ? __lock_is_held+0x93/0x100 ? rcu_read_lock_sched_held+0x5c/0xb0 ? preempt_count_sub+0x18/0xd0 ? __sb_start_write+0x10a/0x230 ? vfs_write+0x222/0x240 vfs_write+0xef/0x240 SyS_write+0xab/0x130 ? SyS_read+0x130/0x130 ? trace_hardirqs_on_caller+0x182/0x280 ? trace_hardirqs_on_thunk+0x1a/0x1c entry_SYSCALL_64_fastpath+0x18/0xad RIP: 0033:0x7fe61c157c30 RSP: 002b:00007ffe87890258 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: ffffffff8114a410 RCX: 00007fe61c157c30 RDX: 0000000000000010 RSI: 000055814798f5e0 RDI: 0000000000000001 RBP: ffff8800c9027f98 R08: 00007fe61c422740 R09: 00007fe61ca53700 R10: 0000000000000073 R11: 0000000000000246 R12: 0000558147a36400 R13: 00007ffe8788f160 R14: 0000000000000024 R15: 00007ffe8788f15c ? trace_hardirqs_off_caller+0xc0/0x110 ---[ end trace 99fa09b3d9869c2c ]--- Bad trampoline accounting at: ffffffff81cc3b00 (do_IRQ+0x0/0x150) Fixes: 59df055f ("ftrace: trace different functions with a different tracer") Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> [bwh: Backported to 3.16: - Use ftrace_run_update_code() instead of ftrace_run_modify_code(), and don't define old_hash - Adjust context] Signed-off-by:
-
Matt Ranostay authored
commit 84ca8e36 upstream. AS3935_WRITE_DATA macro bit is incorrect and the actual write sequence is two leading zeros. Cc: George McCollister <george.mccollister@gmail.com> Signed-off-by:
Matt Ranostay <matt.ranostay@konsulko.com> Signed-off-by:
Jonathan Cameron <jic23@kernel.org> Signed-off-by:
-
Pavel Roskin authored
commit ce420fd4 upstream. realbits, storagebits and shift should be numbers, not ASCII characters. Signed-off-by:
Pavel Roskin <plroskin@gmail.com> Reviewed-by:
Lars-Peter Clausen <lars@metafoo.de> Signed-off-by:
-
Kan Liang authored
commit fd583ad1 upstream. Spurious NMIs will be observed with the following command: while :; do perf record -bae "cpu/umask=0x01,event=0xcd,ldlat=0x80/pp" -e "cpu/umask=0x03,event=0x0/" -e "cpu/umask=0x02,event=0x0/" -e cycles,branches,cache-misses -e cache-references -- sleep 10 done The bug was introduced by commit: 8077eca0 ("perf/x86/pebs: Add workaround for broken OVFL status on HSW+") That commit clears the status bits for the counters used for PEBS events, by masking the whole 64 bits pebs_enabled. However, only the low 32 bits of both status and pebs_enabled are reserved for PEBS-able counters. For status bits 32-34 are fixed counter overflow bits. For pebs_enabled bits 32-34 are for PEBS Load Latency. In the test case, the PEBS Load Latency event and fixed counter event could overflow at the same time. The fixed counter overflow bit will be cleared by mistake. Once it is cleared, the fixed counter overflow never be processed, which finally trigger spurious NMI. Correct the PEBS enabled mask by ignoring the non-PEBS bits. Signed-off-by:
Kan Liang <kan.liang@intel.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Fixes: 8077eca0 ("perf/x86/pebs: Add workaround for broken OVFL status on HSW+") Link: http://lkml.kernel.org/r/1491333246-3965-1-git-send-email-kan.liang@intel.comSigned-off-by:
-
Stephane Eranian authored
commit daa864b8 upstream. This patch solves a race condition between PEBS and the PMU handler. In case multiple PEBS events are sampled at the same time, it is possible to have GLOBAL_STATUS bit 62 set indicating PEBS buffer overflow and also seeing at most 3 PEBS counters having their bits set in the status register. This is a sign that there was at least one PEBS record pending at the time of the PMU interrupt. PEBS counters must only be processed via the drain_pebs() calls, and not via the regular sample processing loop coming after that the function, otherwise phony regular samples may be generated in the sampling buffer not marked with the EXACT tag. Another possibility is to have one PEBS event and at least one non-PEBS event whic hoverflows while PEBS has armed. In this case, bit 62 of GLOBAL_STATUS will not be set, yet the overflow status bit for the PEBS counter will be on Skylake. To avoid this problem, we systematically ignore the PEBS-enabled counters from the GLOBAL_STATUS mask and we always process PEBS events via drain_pebs(). The problem manifested itself by having non-exact samples when sampling only PEBS events, i.e., the PERF_SAMPLE_RECORD would not have the EXACT flag set. Note that this problem is only present on Skylake processor. This fix is harmless on older processors. Reported-by:
Stephane Eranian <eranian@google.com> Signed-off-by:
-
Ludovic Desroches authored
commit d3df1ec0 upstream. Remove ADC channels that are not available by default on the sama5d3_xplained board (resistor not populated) in order to not create confusion. Signed-off-by:
Ludovic Desroches <ludovic.desroches@microchip.com> Acked-by:
Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by:
Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by:
-
Ludovic Desroches authored
commit 9cdd31e5 upstream. The voltage reference for the ADC is not 3V but 3.3V since it is connected to VDDANA. Signed-off-by:
-
Giedrius Statkevičius authored
commit bdd9968d upstream. val might become 7 in which case stime[7] (array of length 7) would be accessed during the scnprintf call later and that will cause issues. Obviously, string concatenation is not intended here so just a comma needs to be added to fix the issue. Fixes: 98a27664 ("power_supply: Add new lp8788 charger driver") Signed-off-by:
Giedrius Statkevičius <giedrius.statkevicius@gmail.com> Acked-by:
Milo Kim <milo.kim@ti.com> Signed-off-by:
-
Alex Williamson authored
commit 0cfef2b7 upstream. If the mmap_sem is contented then the vfio type1 IOMMU backend will defer locked page accounting updates to a workqueue task. This has a few problems and depending on which side the user tries to play, they might be over-penalized for unmaps that haven't yet been accounted or race the workqueue to enter more mappings than they're allowed. The original intent of this workqueue mechanism seems to be focused on reducing latency through the ioctl, but we cannot do so at the cost of correctness. Remove this workqueue mechanism and update the callers to allow for failure. We can also now recheck the limit under write lock to make sure we don't exceed it. vfio_pin_pages_remote() also now necessarily includes an unwind path which we can jump to directly if the consecutive page pinning finds that we're exceeding the user's memory limits. This avoids the current lazy approach which does accounting and mapping up to the fault, only to return an error on the next iteration to unwind the entire vfio_dma. Reviewed-by:
Peter Xu <peterx@redhat.com> Reviewed-by:
Kirti Wankhede <kwankhede@nvidia.com> Signed-off-by:
Alex Williamson <alex.williamson@redhat.com> [bwh: Backported to 3.16: - vfio_lock_acct() always operates on current->mm - Drop changes to vfio_{,un}pin_page_external() and vfio_iommu_unmap_unpin_reaccount() - Drop test of rsvd flag - Fix up the disable_hugepages case in vfio_pin_pages() - Use down_write() instead of down_write_killable() - Adjust context] Signed-off-by:
-
David Woodhouse authored
commit 6bccc7f4 upstream. In the PCI_MMAP_PROCFS case when the address being passed by the user is a 'user visible' resource address based on the bus window, and not the actual contents of the resource, that's what we need to be checking it against. Signed-off-by:
-
Johan Hovold authored
commit 77e6fe7f upstream. Make sure to actually suspend the device before returning after a failed (or deferred) probe. Note that autosuspend must be disabled before runtime pm is disabled in order to balance the usage count due to a negative autosuspend delay as well as to make the final put suspend the device synchronously. Fixes: 388bc262 ("omap-serial: Fix the error handling in the omap_serial probe") Cc: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Johan Hovold authored
commit 099bd73d upstream. An unbalanced and misplaced synchronous put was used to suspend the device on driver unbind, something which with a likewise misplaced pm_runtime_disable leads to external aborts when an open port is being removed. Unhandled fault: external abort on non-linefetch (0x1028) at 0xfa024010 ... [<c046e760>] (serial_omap_set_mctrl) from [<c046a064>] (uart_update_mctrl+0x50/0x60) [<c046a064>] (uart_update_mctrl) from [<c046a400>] (uart_shutdown+0xbc/0x138) [<c046a400>] (uart_shutdown) from [<c046bd2c>] (uart_hangup+0x94/0x190) [<c046bd2c>] (uart_hangup) from [<c045b760>] (__tty_hangup+0x404/0x41c) [<c045b760>] (__tty_hangup) from [<c045b794>] (tty_vhangup+0x1c/0x20) [<c045b794>] (tty_vhangup) from [<c046ccc8>] (uart_remove_one_port+0xec/0x260) [<c046ccc8>] (uart_remove_one_port) from [<c046ef4c>] (serial_omap_remove+0x40/0x60) [<c046ef4c>] (serial_omap_remove) from [<c04845e8>] (platform_drv_remove+0x34/0x4c) Fix this up by resuming the device before deregistering the port and by suspending and disabling runtime pm only after the port has been removed. Also make sure to disable autosuspend before disabling runtime pm so that the usage count is balanced and device actually suspended before returning. Note that due to a negative autosuspend delay being set in probe, the unbalanced put would actually suspend the device on first driver unbind, while rebinding and again unbinding would result in a negative power.usage_count. Fixes: 7e9c8e7d ("serial: omap: make sure to suspend device before remove") Cc: Felipe Balbi <balbi@kernel.org> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by:
-
David Carrillo-Cisneros authored
commit bb8d521f upstream. All paths following perf_session__process_event() in __cmd_inject() are useless if __cmd_inject() is to fail, some depend on a correct session->evlist. First commit to add code that depends on session->evlist without checking error was commmit e558a5bd ("perf inject: Work with files"). It has grown since then. Change __cmd_inject() to fail immediately after perf_session__process_event() fails. Signed-off-by:
David Carrillo-Cisneros <davidcc@google.com> Acked-by:
Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrew Vagin <avagin@openvz.org> Cc: He Kuang <hekuang@huawei.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Paul Turner <pjt@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Simon Que <sque@chromium.org> Cc: Stephane Eranian <eranian@google.com> Cc: Wang Nan <wangnan0@huawei.com> Fixes: e558a5bd ("perf inject: Work with files") Link: http://lkml.kernel.org/r/20170410201432.24807-2-davidcc@google.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> [bwh: Backported to 3.16: adjust context] Signed-off-by:
-
Jason A. Donenfeld authored
commit 07a77929 upstream. The author meant to free the variable that was just allocated, instead of the one that failed to be allocated, but made a simple typo. This patch rectifies that. Signed-off-by:
Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
