- 09 Aug, 2019 40 commits
-
-
Greg Kroah-Hartman authored
-
Lukas Wunner authored
commit 8d8bef50 upstream. Commit 6935224d ("spi: bcm2835: enable support of 3-wire mode") added 3-wire support to the BCM2835 SPI driver by setting the REN bit (Read Enable) in the CS register when receiving data. The REN bit puts the transmitter in high-impedance state. The driver recognizes that data is to be received by checking whether the rx_buf of a transfer is non-NULL. Commit 3ecd37ed ("spi: bcm2835: enable dma modes for transfers meeting certain conditions") subsequently broke 3-wire support because it set the SPI_MASTER_MUST_RX flag which causes spi_map_msg() to replace rx_buf with a dummy buffer if it is NULL. As a result, rx_buf is *always* non-NULL if DMA is enabled. Reinstate 3-wire support by not only checking whether rx_buf is non-NULL, but also checking that it is not the dummy buffer. Fixes: 3ecd37ed ("spi: bcm2835: enable dma modes for transfers meeting certain conditions") Reported-by:
Nuno Sá <nuno.sa@analog.com> Signed-off-by:
Lukas Wunner <lukas@wunner.de> Cc: stable@vger.kernel.org # v4.2+ Cc: Martin Sperl <kernel@martin.sperl.org> Acked-by:
Stefan Wahren <wahrenst@gmx.net> Link: https://lore.kernel.org/r/328318841455e505370ef8ecad97b646c033dc8a.1562148527.git.lukas@wunner.deSigned-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Tejun Heo authored
commit c596687a upstream. While adding handling for dying task group leaders c03cd773 ("cgroup: Include dying leaders with live threads in PROCS iterations") added an inverted cset skip condition to css_task_iter_advance_css_set(). It should skip cset if it's completely empty but was incorrectly testing for the inverse condition for the dying_tasks list. Fix it. Signed-off-by:
Tejun Heo <tj@kernel.org> Fixes: c03cd773 ("cgroup: Include dying leaders with live threads in PROCS iterations") Reported-by: syzbot+d4bba5ccd4f9a2a68681@syzkaller.appspotmail.com Signed-off-by:
-
Tejun Heo authored
commit cee0c33c upstream. b636fd38 ("cgroup: Implement css_task_iter_skip()") introduced css_task_iter_skip() which is used to fix task iterations skipping dying threadgroup leaders with live threads. Skipping is implemented as a subportion of full advancing but css_task_iter_next() forgot to fully advance a skipped iterator before determining the next task to visit causing it to return invalid task pointers. Fix it by making css_task_iter_next() fully advance the iterator if it has been skipped since the previous iteration. Signed-off-by:
-
Tejun Heo authored
commit c03cd773 upstream. CSS_TASK_ITER_PROCS currently iterates live group leaders; however, this means that a process with dying leader and live threads will be skipped. IOW, cgroup.procs might be empty while cgroup.threads isn't, which is confusing to say the least. Fix it by making cset track dying tasks and include dying leaders with live threads in PROCS iteration. Signed-off-by:
Topi Miettinen <toiwoton@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by:
-
Tejun Heo authored
commit b636fd38 upstream. When a task is moved out of a cset, task iterators pointing to the task are advanced using the normal css_task_iter_advance() call. This is fine but we'll be tracking dying tasks on csets and thus moving tasks from cset->tasks to (to be added) cset->dying_tasks. When we remove a task from cset->tasks, if we advance the iterators, they may move over to the next cset before we had the chance to add the task back on the dying list, which can allow the task to escape iteration. This patch separates out skipping from advancing. Skipping only moves the affected iterators to the next pointer rather than fully advancing it and the following advancing will recognize that the cursor has already been moved forward and do the rest of advancing. This ensures that when a task moves from one list to another in its cset, as long as it moves in the right direction, it's always visible to iteration. This doesn't cause any visible behavior changes. Signed-off-by:
-
Tejun Heo authored
commit 6b115bf5 upstream. cgroup_release() calls cgroup_subsys->release() which is used by the pids controller to uncharge its pid. We want to use it to manage iteration of dying tasks which requires putting it before __unhash_process(). Move cgroup_release() above __exit_signal(). While this makes it uncharge before the pid is freed, pid is RCU freed anyway and the window is very narrow. Signed-off-by:
-
Arnd Bergmann authored
[ Upstream commit 055d8824 ] Support for handling the PPPOEIOCSFWD ioctl in compat mode was added in linux-2.5.69 along with hundreds of other commands, but was always broken sincen only the structure is compatible, but the command number is not, due to the size being sizeof(size_t), or at first sizeof(sizeof((struct sockaddr_pppox)), which is different on 64-bit architectures. Guillaume Nault adds: And the implementation was broken until 2016 (see 29e73269 ("pppoe: fix reference counting in PPPoE proxy")), and nobody ever noticed. I should probably have removed this ioctl entirely instead of fixing it. Clearly, it has never been used. Fix it by adding a compat_ioctl handler for all pppoe variants that translates the command number and then calls the regular ioctl function. All other ioctl commands handled by pppoe are compatible between 32-bit and 64-bit, and require compat_ptr() conversion. This should apply to all stable kernels. Acked-by:
Guillaume Nault <g.nault@alphalink.fr> Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Heiner Kallweit authored
[ Upstream commit 003bd5b4 ] It was reported that after resuming from suspend network fails with error "do_IRQ: 3.38 No irq handler for vector", see [0]. Enabling WoL can work around the issue, but the only actual fix is to disable MSI. So let's mimic the behavior of the vendor driver and disable MSI on all chip versions before RTL8168d. [0] https://bugzilla.kernel.org/show_bug.cgi?id=204079 Fixes: 6c6aa15f ("r8169: improve interrupt handling") Reported-by:
Dušan Dragić <dragic.dusan@gmail.com> Tested-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
-
Ariel Levkovich authored
[ Upstream commit 90bb7692 ] This patch prevents a race between user invoked cached counters query and a neighbor last usage updater. The cached flow counter stats can be queried by calling "mlx5_fc_query_cached" which provides the number of bytes and packets that passed via this flow since the last time this counter was queried. It does so by reducting the last saved stats from the current, cached stats and then updating the last saved stats with the cached stats. It also provide the lastuse value for that flow. Since "mlx5e_tc_update_neigh_used_value" needs to retrieve the last usage time of encapsulation flows, it calls the flow counter query method periodically and async to user queries of the flow counter using cls_flower. This call is causing the driver to update the last reported bytes and packets from the cache and therefore, future user queries of the flow stats will return lower than expected number for bytes and packets since the last saved stats in the driver was updated async to the last saved stats in cls_flower. This causes wrong stats presentation of encapsulation flows to user. Since the neighbor usage updater only needs the lastuse stats from the cached counter, the fix is to use a dedicated lastuse query call that returns the lastuse value without synching between the cached stats and the last saved stats. Fixes: f6dfb4c3 ("net/mlx5e: Update neighbour 'used' state using HW flow rules counters") Signed-off-by:
Ariel Levkovich <lariel@mellanox.com> Reviewed-by:
Roi Dayan <roid@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
-
Edward Srouji authored
[ Upstream commit 7a32f296 ] Fix modify_cq_in alignment to match the device specification. After this fix the 'cq_umem_valid' field will be in the right offset. Cc: <stable@vger.kernel.org> # 4.19 Fixes: bd371975 ("net/mlx5: Update mlx5_ifc with DEVX UID bits") Signed-off-by:
Edward Srouji <edwards@mellanox.com> Reviewed-by:
Yishai Hadas <yishaih@mellanox.com> Signed-off-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
-
Alexis Bauvin authored
[ Upstream commit 4b663366 ] - v1 -> v2: Move skb_set_owner_w to __tun_build_skb to reduce patch size Small packets going out of a tap device go through an optimized code path that uses build_skb() rather than sock_alloc_send_pskb(). The latter calls skb_set_owner_w(), but the small packet code path does not. The net effect is that small packets are not owned by the userland application's socket (e.g. QEMU), while large packets are. This can be seen with a TCP session, where packets are not owned when the window size is small enough (around PAGE_SIZE), while they are once the window grows (note that this requires the host to support virtio tso for the guest to offload segmentation). All this leads to inconsistent behaviour in the kernel, especially on netfilter modules that uses sk->socket (e.g. xt_owner). Fixes: 66ccbc9c ("tap: use build_skb() for small packet") Signed-off-by:
Alexis Bauvin <abauvin@scaleway.com> Acked-by:
Jason Wang <jasowang@redhat.com> Signed-off-by:
-
Taras Kondratiuk authored
[ Upstream commit 4da5f001 ] Commit 2753ca5d ("tipc: fix uninit-value in tipc_nl_compat_doit") broke older tipc tools that use compat interface (e.g. tipc-config from tipcutils package): % tipc-config -p operation not supported The commit started to reject TIPC netlink compat messages that do not have attributes. It is too restrictive because some of such messages are valid (they don't need any arguments): % grep 'tx none' include/uapi/linux/tipc_config.h #define TIPC_CMD_NOOP 0x0000 /* tx none, rx none */ #define TIPC_CMD_GET_MEDIA_NAMES 0x0002 /* tx none, rx media_name(s) */ #define TIPC_CMD_GET_BEARER_NAMES 0x0003 /* tx none, rx bearer_name(s) */ #define TIPC_CMD_SHOW_PORTS 0x0006 /* tx none, rx ultra_string */ #define TIPC_CMD_GET_REMOTE_MNG 0x4003 /* tx none, rx unsigned */ #define TIPC_CMD_GET_MAX_PORTS 0x4004 /* tx none, rx unsigned */ #define TIPC_CMD_GET_NETID 0x400B /* tx none, rx unsigned */ #define TIPC_CMD_NOT_NET_ADMIN 0xC001 /* tx none, rx none */ This patch relaxes the original fix and rejects messages without arguments only if such arguments are expected by a command (reg_type is non zero). Fixes: 2753ca5d ("tipc: fix uninit-value in tipc_nl_compat_doit") Cc: stable@vger.kernel.org Signed-off-by:
Taras Kondratiuk <takondra@cisco.com> Acked-by:
Ying Xue <ying.xue@windriver.com> Signed-off-by:
-
Claudiu Manoil authored
[ Upstream commit c5d13969 ] Make sure the delayed work for stats update is not pending before wq destruction. This fixes the module unload path. The issue is there since day 1. Fixes: a556c76a ("net: mscc: Add initial Ocelot switch support") Signed-off-by:
Claudiu Manoil <claudiu.manoil@nxp.com> Reviewed-by:
Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by:
-
Johan Hovold authored
[ Upstream commit c3953a3c ] Fix two reset-gpio sanity checks which were never converted to use gpio_is_valid(), and make sure to use -EINVAL to indicate a missing reset line also for the UART-driver module parameter and for the USB driver. This specifically prevents the UART and USB drivers from incidentally trying to request and use gpio 0, and also avoids triggering a WARN() in gpio_to_desc() during probe when no valid reset line has been specified. Fixes: e33a3f84 ("NFC: nfcmrvl: allow gpio 0 for reset signalling") Reported-by: syzbot+cf35b76f35e068a1107f@syzkaller.appspotmail.com Tested-by: syzbot+cf35b76f35e068a1107f@syzkaller.appspotmail.com Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Ursula Braun authored
[ Upstream commit f9cedf1a ] The setsockopts options TCP_NODELAY and TCP_CORK may schedule the tx worker. Make sure the socket is not yet moved into SMC_CLOSED state (for instance by a shutdown SHUT_RDWR call). Reported-by: syzbot+92209502e7aab127c75f@syzkaller.appspotmail.com Reported-by: syzbot+b972214bb803a343f4fe@syzkaller.appspotmail.com Fixes: 01d2f7e2 ("net/smc: sockopts TCP_NODELAY and TCP_CORK") Signed-off-by:
Ursula Braun <ubraun@linux.ibm.com> Signed-off-by:
Karsten Graul <kgraul@linux.ibm.com> Signed-off-by:
-
Dmytro Linkin authored
[ Upstream commit 7be8ef2c ] Currently init call of all actions (except ipt) init their 'parm' structure as a direct pointer to nla data in skb. This leads to race condition when some of the filter actions were initialized successfully (and were assigned with idr action index that was written directly into nla data), but then were deleted and retried (due to following action module missing or classifier-initiated retry), in which case action init code tries to insert action to idr with index that was assigned on previous iteration. During retry the index can be reused by another action that was inserted concurrently, which causes unintended action sharing between filters. To fix described race condition, save action idr index to temporary stack-allocated variable instead on nla data. Fixes: 0190c1d4 ("net: sched: atomically check-allocate action") Signed-off-by:
Dmytro Linkin <dmitrolin@mellanox.com> Signed-off-by:
Vlad Buslov <vladbu@mellanox.com> Acked-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
Roman Mashak authored
[ Upstream commit b35475c5 ] Add get_fill_size() routine used to calculate the action size when building a batch of events. Fixes: c7e2b968 ("sched: introduce vlan action") Signed-off-by:
Roman Mashak <mrv@mojatatu.com> Signed-off-by:
-
Jia-Ju Bai authored
[ Upstream commit 051c7b39 ] In dequeue_func(), there is an if statement on line 74 to check whether skb is NULL: if (skb) When skb is NULL, it is used on line 77: prefetch(&skb->end); Thus, a possible null-pointer dereference may occur. To fix this bug, skb->end is used when skb is not NULL. This bug is found by a static analysis tool STCheck written by us. Fixes: 76e3cc12 ("codel: Controlled Delay AQM") Signed-off-by:
Jia-Ju Bai <baijiaju1990@gmail.com> Reviewed-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Subash Abhinov Kasiviswanathan authored
[ Upstream commit a7cf3d24 ] The udp_ip4_ind bit is set only for IPv4 UDP non-fragmented packets so that the hardware can flip the checksum to 0xFFFF if the computed checksum is 0 per RFC768. However, this bit had to be set for IPv6 UDP non fragmented packets as well per hardware requirements. Otherwise, IPv6 UDP packets with computed checksum as 0 were transmitted by hardware and were dropped in the network. In addition to setting this bit for IPv6 UDP, the field is also appropriately renamed to udp_ind as part of this change. Fixes: 5eb5f860 ("net: qualcomm: rmnet: Add support for TX checksum offload") Cc: Sean Tranchetti <stranche@codeaurora.org> Signed-off-by:
Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Signed-off-by:
-
René van Dorst authored
[ Upstream commit 8aace4f3 ] In phylink_parse_fixedlink() the pl->link_config.advertising bits are AND with pl->supported, pl->supported is zeroed and only the speed/duplex modes and MII bits are set. So pl->link_config.advertising always loses the flow control/pause bits. By setting Pause and Asym_Pause bits in pl->supported, the flow control work again when devicetree "pause" is set in fixes-link node and the MAC advertise that is supports pause. Results with this patch. Legend: - DT = 'Pause' is set in the fixed-link in devicetree. - validate() = ‘Yes’ means phylink_set(mask, Pause) is set in the validate(). - flow = results reported my link is Up line. +-----+------------+-------+ | DT | validate() | flow | +-----+------------+-------+ | Yes | Yes | rx/tx | | No | Yes | off | | Yes | No | off | +-----+------------+-------+ Fixes: 9525ae83 ("phylink: add phylink infrastructure") Signed-off-by:
René van Dorst <opensource@vdorst.com> Acked-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Mark Zhang authored
[ Upstream commit 08aa5e7d ] When lag is active, which is controlled by the bonded mlx5e netdev, mlx5 interface unregestering must happen in the reverse order where rdma is unregistered (unloaded) first, to guarantee all references to the lag context in hardware is removed, then remove mlx5e netdev interface which will cleanup the lag context from hardware. Without this fix during destroy of LAG interface, we observed following errors: * mlx5_cmd_check:752:(pid 12556): DESTROY_LAG(0x843) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0xe4ac33) * mlx5_cmd_check:752:(pid 12556): DESTROY_LAG(0x843) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0xa5aee8). Fixes: a31208b1 ("net/mlx5_core: New init and exit flow for mlx5_core") Reviewed-by:
Parav Pandit <parav@mellanox.com> Reviewed-by:
Mark Zhang <markz@mellanox.com> Signed-off-by:
-
Qian Cai authored
[ Upstream commit 60d60c8f ] The commit 069d1146 ("net/mlx5e: RX, Enhance legacy Receive Queue memory scheme") introduced an undefined behaviour below due to "frag->last_in_page" is only initialized in mlx5e_init_frags_partition() when, if (next_frag.offset + frag_info[f].frag_stride > PAGE_SIZE) or after bailed out the loop, for (i = 0; i < mlx5_wq_cyc_get_size(&rq->wqe.wq); i++) As the result, there could be some "frag" have uninitialized value of "last_in_page". Later, get_frag() obtains those "frag" and check "frag->last_in_page" in mlx5e_put_rx_frag() and triggers the error during boot. Fix it by always initializing "frag->last_in_page" to "false" in mlx5e_init_frags_partition(). UBSAN: Undefined behaviour in drivers/net/ethernet/mellanox/mlx5/core/en_rx.c:325:12 load of value 170 is not a valid value for type 'bool' (aka '_Bool') Call trace: dump_backtrace+0x0/0x264 show_stack+0x20/0x2c dump_stack+0xb0/0x104 __ubsan_handle_load_invalid_value+0x104/0x128 mlx5e_handle_rx_cqe+0x8e8/0x12cc [mlx5_core] mlx5e_poll_rx_cq+0xca8/0x1a94 [mlx5_core] mlx5e_napi_poll+0x17c/0xa30 [mlx5_core] net_rx_action+0x248/0x940 __do_softirq+0x350/0x7b8 irq_exit+0x200/0x26c __handle_domain_irq+0xc8/0x128 gic_handle_irq+0x138/0x228 el1_irq+0xb8/0x140 arch_cpu_idle+0x1a4/0x348 do_idle+0x114/0x1b0 cpu_startup_entry+0x24/0x28 rest_init+0x1ac/0x1dc arch_call_rest_init+0x10/0x18 start_kernel+0x4d4/0x57c Fixes: 069d1146 ("net/mlx5e: RX, Enhance legacy Receive Queue memory scheme") Signed-off-by:
Qian Cai <cai@lca.pw> Reviewed-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
-
Jiri Pirko authored
[ Upstream commit 55b40dbf ] Commit aca51397 ("netns: Fix arbitrary net_device-s corruptions on net_ns stop.") introduced a possibility to hit a BUG in case device is returning back to init_net and two following conditions are met: 1) dev->ifindex value is used in a name of another "dev%d" device in init_net. 2) dev->name is used by another device in init_net. Under real life circumstances this is hard to get. Therefore this has been present happily for over 10 years. To reproduce: $ ip a 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: dummy0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 86:89:3f:86:61:29 brd ff:ff:ff:ff:ff:ff 3: enp0s2: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 52:54:00:12:34:56 brd ff:ff:ff:ff:ff:ff $ ip netns add ns1 $ ip -n ns1 link add dummy1ns1 type dummy $ ip -n ns1 link add dummy2ns1 type dummy $ ip link set enp0s2 netns ns1 $ ip -n ns1 link set enp0s2 name dummy0 [ 100.858894] virtio_net virtio0 dummy0: renamed from enp0s2 $ ip link add dev4 type dummy $ ip -n ns1 a 1: lo: <LOOPBACK> mtu 65536 qdisc noop state DOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: dummy1ns1: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 16:63:4c:38:3e:ff brd ff:ff:ff:ff:ff:ff 3: dummy2ns1: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether aa:9e:86:dd:6b:5d brd ff:ff:ff:ff:ff:ff 4: dummy0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 52:54:00:12:34:56 brd ff:ff:ff:ff:ff:ff $ ip a 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: dummy0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 86:89:3f:86:61:29 brd ff:ff:ff:ff:ff:ff 4: dev4: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 5a:e1:4a:b6:ec:f8 brd ff:ff:ff:ff:ff:ff $ ip netns del ns1 [ 158.717795] default_device_exit: failed to move dummy0 to init_net: -17 [ 158.719316] ------------[ cut here ]------------ [ 158.720591] kernel BUG at net/core/dev.c:9824! [ 158.722260] invalid opcode: 0000 [#1] SMP KASAN PTI [ 158.723728] CPU: 0 PID: 56 Comm: kworker/u2:1 Not tainted 5.3.0-rc1+ #18 [ 158.725422] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-2.fc30 04/01/2014 [ 158.727508] Workqueue: netns cleanup_net [ 158.728915] RIP: 0010:default_device_exit.cold+0x1d/0x1f [ 158.730683] Code: 84 e8 18 c9 3e fe 0f 0b e9 70 90 ff ff e8 36 e4 52 fe 89 d9 4c 89 e2 48 c7 c6 80 d6 25 84 48 c7 c7 20 c0 25 84 e8 f4 c8 3e [ 158.736854] RSP: 0018:ffff8880347e7b90 EFLAGS: 00010282 [ 158.738752] RAX: 000000000000003b RBX: 00000000ffffffef RCX: 0000000000000000 [ 158.741369] RDX: 0000000000000000 RSI: ffffffff8128013d RDI: ffffed10068fcf64 [ 158.743418] RBP: ffff888033550170 R08: 000000000000003b R09: fffffbfff0b94b9c [ 158.745626] R10: fffffbfff0b94b9b R11: ffffffff85ca5cdf R12: ffff888032f28000 [ 158.748405] R13: dffffc0000000000 R14: ffff8880335501b8 R15: 1ffff110068fcf72 [ 158.750638] FS: 0000000000000000(0000) GS:ffff888036000000(0000) knlGS:0000000000000000 [ 158.752944] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 158.755245] CR2: 00007fe8b45d21d0 CR3: 00000000340b4005 CR4: 0000000000360ef0 [ 158.757654] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 158.760012] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 158.762758] Call Trace: [ 158.763882] ? dev_change_net_namespace+0xbb0/0xbb0 [ 158.766148] ? devlink_nl_cmd_set_doit+0x520/0x520 [ 158.768034] ? dev_change_net_namespace+0xbb0/0xbb0 [ 158.769870] ops_exit_list.isra.0+0xa8/0x150 [ 158.771544] cleanup_net+0x446/0x8f0 [ 158.772945] ? unregister_pernet_operations+0x4a0/0x4a0 [ 158.775294] process_one_work+0xa1a/0x1740 [ 158.776896] ? pwq_dec_nr_in_flight+0x310/0x310 [ 158.779143] ? do_raw_spin_lock+0x11b/0x280 [ 158.780848] worker_thread+0x9e/0x1060 [ 158.782500] ? process_one_work+0x1740/0x1740 [ 158.784454] kthread+0x31b/0x420 [ 158.786082] ? __kthread_create_on_node+0x3f0/0x3f0 [ 158.788286] ret_from_fork+0x3a/0x50 [ 158.789871] ---[ end trace defd6c657c71f936 ]--- [ 158.792273] RIP: 0010:default_device_exit.cold+0x1d/0x1f [ 158.795478] Code: 84 e8 18 c9 3e fe 0f 0b e9 70 90 ff ff e8 36 e4 52 fe 89 d9 4c 89 e2 48 c7 c6 80 d6 25 84 48 c7 c7 20 c0 25 84 e8 f4 c8 3e [ 158.804854] RSP: 0018:ffff8880347e7b90 EFLAGS: 00010282 [ 158.807865] RAX: 000000000000003b RBX: 00000000ffffffef RCX: 0000000000000000 [ 158.811794] RDX: 0000000000000000 RSI: ffffffff8128013d RDI: ffffed10068fcf64 [ 158.816652] RBP: ffff888033550170 R08: 000000000000003b R09: fffffbfff0b94b9c [ 158.820930] R10: fffffbfff0b94b9b R11: ffffffff85ca5cdf R12: ffff888032f28000 [ 158.825113] R13: dffffc0000000000 R14: ffff8880335501b8 R15: 1ffff110068fcf72 [ 158.829899] FS: 0000000000000000(0000) GS:ffff888036000000(0000) knlGS:0000000000000000 [ 158.834923] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 158.838164] CR2: 00007fe8b45d21d0 CR3: 00000000340b4005 CR4: 0000000000360ef0 [ 158.841917] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 158.845149] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Fix this by checking if a device with the same name exists in init_net and fallback to original code - dev%d to allocate name - in case it does. This was found using syzkaller. Fixes: aca51397 ("netns: Fix arbitrary net_device-s corruptions on net_ns stop.") Signed-off-by:
-
Nikolay Aleksandrov authored
[ Upstream commit 5c725b6b ] When permanent entries were introduced by the commit below, they were exempt from timing out and thus igmp leave wouldn't affect them unless fast leave was enabled on the port which was added before permanent entries existed. It shouldn't matter if fast leave is enabled or not if the user added a permanent entry it shouldn't be deleted on igmp leave. Before: $ echo 1 > /sys/class/net/eth4/brport/multicast_fast_leave $ bridge mdb add dev br0 port eth4 grp 229.1.1.1 permanent $ bridge mdb show dev br0 port eth4 grp 229.1.1.1 permanent < join and leave 229.1.1.1 on eth4 > $ bridge mdb show $ After: $ echo 1 > /sys/class/net/eth4/brport/multicast_fast_leave $ bridge mdb add dev br0 port eth4 grp 229.1.1.1 permanent $ bridge mdb show dev br0 port eth4 grp 229.1.1.1 permanent < join and leave 229.1.1.1 on eth4 > $ bridge mdb show dev br0 port eth4 grp 229.1.1.1 permanent Fixes: ccb1c31a ("bridge: add flags to distinguish permanent mdb entires") Signed-off-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
-
Nikolay Aleksandrov authored
[ Upstream commit d7bae09f ] On initialization failure we have to delete the local fdb which was inserted due to the default pvid creation. This problem has been present since the inception of default_pvid. Note that currently there are 2 cases: 1) in br_dev_init() when br_multicast_init() fails 2) if register_netdevice() fails after calling ndo_init() This patch takes care of both since br_vlan_flush() is called on both occasions. Also the new fdb delete would be a no-op on normal bridge device destruction since the local fdb would've been already flushed by br_dev_delete(). This is not an issue for ports since nbp_vlan_init() is called last when adding a port thus nothing can fail after it. Reported-by: syzbot+88533dc8b582309bf3ee@syzkaller.appspotmail.com Fixes: 5be5a2df ("bridge: Add filtering support for default_pvid") Signed-off-by:
-
Matteo Croce authored
[ Upstream commit 230bd958 ] The MTU change code can call napi_disable() with the device already down, leading to a deadlock. Also, lot of code is duplicated unnecessarily. Rework mvpp2_change_mtu() to avoid the deadlock and remove duplicated code. Fixes: 3f518509 ("ethernet: Add new driver for Marvell Armada 375 network unit") Signed-off-by:
Matteo Croce <mcroce@redhat.com> Signed-off-by:
-
Matteo Croce authored
[ Upstream commit 944a83a2 ] mvpp2 uses a delayed workqueue to gather traffic statistics. On module removal the workqueue can be destroyed before calling cancel_delayed_work_sync() on its works. Fix it by moving the destroy_workqueue() call after mvpp2_port_remove(). Also remove an unneeded call to flush_workqueue() # rmmod mvpp2 [ 2743.311722] mvpp2 f4000000.ethernet eth1: phy link down 10gbase-kr/10Gbps/Full [ 2743.320063] mvpp2 f4000000.ethernet eth1: Link is Down [ 2743.572263] mvpp2 f4000000.ethernet eth2: phy link down sgmii/1Gbps/Full [ 2743.580076] mvpp2 f4000000.ethernet eth2: Link is Down [ 2744.102169] mvpp2 f2000000.ethernet eth0: phy link down 10gbase-kr/10Gbps/Full [ 2744.110441] mvpp2 f2000000.ethernet eth0: Link is Down [ 2744.115614] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [ 2744.115615] Mem abort info: [ 2744.115616] ESR = 0x96000005 [ 2744.115617] Exception class = DABT (current EL), IL = 32 bits [ 2744.115618] SET = 0, FnV = 0 [ 2744.115619] EA = 0, S1PTW = 0 [ 2744.115620] Data abort info: [ 2744.115621] ISV = 0, ISS = 0x00000005 [ 2744.115622] CM = 0, WnR = 0 [ 2744.115624] user pgtable: 4k pages, 39-bit VAs, pgdp=0000000422681000 [ 2744.115626] [0000000000000000] pgd=0000000000000000, pud=0000000000000000 [ 2744.115630] Internal error: Oops: 96000005 [#1] SMP [ 2744.115632] Modules linked in: mvpp2(-) algif_hash af_alg nls_iso8859_1 nls_cp437 vfat fat xhci_plat_hcd m25p80 spi_nor xhci_hcd mtd usbcore i2c_mv64xxx sfp usb_common marvell10g phy_generic spi_orion mdio_i2c i2c_core mvmdio phylink sbsa_gwdt ip_tables x_tables autofs4 [last unloaded: mvpp2] [ 2744.115654] CPU: 3 PID: 8357 Comm: kworker/3:2 Not tainted 5.3.0-rc2 #1 [ 2744.115655] Hardware name: Marvell 8040 MACCHIATOBin Double-shot (DT) [ 2744.115665] Workqueue: events_power_efficient phylink_resolve [phylink] [ 2744.115669] pstate: a0000085 (NzCv daIf -PAN -UAO) [ 2744.115675] pc : __queue_work+0x9c/0x4d8 [ 2744.115677] lr : __queue_work+0x170/0x4d8 [ 2744.115678] sp : ffffff801001bd50 [ 2744.115680] x29: ffffff801001bd50 x28: ffffffc422597600 [ 2744.115684] x27: ffffff80109ae6f0 x26: ffffff80108e4018 [ 2744.115688] x25: 0000000000000003 x24: 0000000000000004 [ 2744.115691] x23: ffffff80109ae6e0 x22: 0000000000000017 [ 2744.115694] x21: ffffffc42c030000 x20: ffffffc42209e8f8 [ 2744.115697] x19: 0000000000000000 x18: 0000000000000000 [ 2744.115699] x17: 0000000000000000 x16: 0000000000000000 [ 2744.115701] x15: 0000000000000010 x14: ffffffffffffffff [ 2744.115702] x13: ffffff8090e2b95f x12: ffffff8010e2b967 [ 2744.115704] x11: ffffff8010906000 x10: 0000000000000040 [ 2744.115706] x9 : ffffff80109223b8 x8 : ffffff80109223b0 [ 2744.115707] x7 : ffffffc42bc00068 x6 : 0000000000000000 [ 2744.115709] x5 : ffffffc42bc00000 x4 : 0000000000000000 [ 2744.115710] x3 : 0000000000000000 x2 : 0000000000000000 [ 2744.115712] x1 : 0000000000000008 x0 : ffffffc42c030000 [ 2744.115714] Call trace: [ 2744.115716] __queue_work+0x9c/0x4d8 [ 2744.115718] delayed_work_timer_fn+0x28/0x38 [ 2744.115722] call_timer_fn+0x3c/0x180 [ 2744.115723] expire_timers+0x60/0x168 [ 2744.115724] run_timer_softirq+0xbc/0x1e8 [ 2744.115727] __do_softirq+0x128/0x320 [ 2744.115731] irq_exit+0xa4/0xc0 [ 2744.115734] __handle_domain_irq+0x70/0xc0 [ 2744.115735] gic_handle_irq+0x58/0xa8 [ 2744.115737] el1_irq+0xb8/0x140 [ 2744.115738] console_unlock+0x3a0/0x568 [ 2744.115740] vprintk_emit+0x200/0x2a0 [ 2744.115744] dev_vprintk_emit+0x1c8/0x1e4 [ 2744.115747] dev_printk_emit+0x6c/0x7c [ 2744.115751] __netdev_printk+0x104/0x1d8 [ 2744.115752] netdev_printk+0x60/0x70 [ 2744.115756] phylink_resolve+0x38c/0x3c8 [phylink] [ 2744.115758] process_one_work+0x1f8/0x448 [ 2744.115760] worker_thread+0x54/0x500 [ 2744.115762] kthread+0x12c/0x130 [ 2744.115764] ret_from_fork+0x10/0x1c [ 2744.115768] Code: aa1403e0 97fffbbe aa0003f5 b4000700 (f9400261) Fixes: 118d6298 ("net: mvpp2: add ethtool GOP statistics") Signed-off-by:
Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by:
Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by:
-
Jiri Pirko authored
[ Upstream commit 28fe7900 ] In case of sp2 pci driver registration fail, fix the error path to start with sp1 pci driver unregister. Fixes: c3ab4354 ("mlxsw: spectrum: Extend to support Spectrum-2 ASIC") Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
-
Haishuang Yan authored
[ Upstream commit 47d858d0 ] We need the same checks introduced by commit cb9f1b78 ("ip: validate header length on virtual device xmit") for ipip tunnel. Fixes: cb9f1b78 ("ip: validate header length on virtual device xmit") Signed-off-by:
Haishuang Yan <yanhaishuang@cmss.chinamobile.com> Signed-off-by:
-
Haishuang Yan authored
[ Upstream commit 01f5bffa ] ip4ip6/ip6ip6 tunnels run iptunnel_handle_offloads on xmit which can cause a possible use-after-free accessing iph/ipv6h pointer since the packet will be 'uncloned' running pskb_expand_head if it is a cloned gso skb. Fixes: 0e9a7095 ("ip6_tunnel, ip6_gre: fix setting of DSCP on encapsulated packets") Signed-off-by:
-
Haishuang Yan authored
[ Upstream commit 3bc817d6 ] Since ip6_tnl_parse_tlv_enc_lim() can call pskb_may_pull() which may change skb->data, so we need to re-load ipv6h at the right place. Fixes: 898b2979 ("ip6_gre: Refactor ip6gre xmit codes") Cc: William Tu <u9012063@gmail.com> Signed-off-by:
William Tu <u9012063@gmail.com> Signed-off-by:
-
Cong Wang authored
[ Upstream commit c8ec4632 ] act_ife at least requires TCA_IFE_PARMS, so we have to bail out when there is no attribute passed in. Reported-by: syzbot+fbb5b288c9cb6a2eeac4@syzkaller.appspotmail.com Fixes: ef6980b6 ("introduce IFE action") Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by:
-
Sudarsana Reddy Kalluru authored
[ Upstream commit d1f0b5dc ] Commit 3968d389 ("bnx2x: Fix Multi-Cos.") which enabled multi-cos feature after prolonged time in driver added some regression causing numerous issues (sudden reboots, tx timeout etc.) reported by customers. We plan to backout this commit and submit proper fix once we have root cause of issues reported with this feature enabled. Fixes: 3968d389 ("bnx2x: Fix Multi-Cos.") Signed-off-by:
Sudarsana Reddy Kalluru <skalluru@marvell.com> Signed-off-by:
Manish Chopra <manishc@marvell.com> Signed-off-by:
-
Gustavo A. R. Silva authored
[ Upstream commit ea443e5e ] board is controlled by user-space, hence leading to a potential exploitation of the Spectre variant 1 vulnerability. This issue was detected with the help of Smatch: drivers/atm/iphase.c:2765 ia_ioctl() warn: potential spectre issue 'ia_dev' [r] (local cap) drivers/atm/iphase.c:2774 ia_ioctl() warn: possible spectre second half. 'iadev' drivers/atm/iphase.c:2782 ia_ioctl() warn: possible spectre second half. 'iadev' drivers/atm/iphase.c:2816 ia_ioctl() warn: possible spectre second half. 'iadev' drivers/atm/iphase.c:2823 ia_ioctl() warn: possible spectre second half. 'iadev' drivers/atm/iphase.c:2830 ia_ioctl() warn: potential spectre issue '_ia_dev' [r] (local cap) drivers/atm/iphase.c:2845 ia_ioctl() warn: possible spectre second half. 'iadev' drivers/atm/iphase.c:2856 ia_ioctl() warn: possible spectre second half. 'iadev' Fix this by sanitizing board before using it to index ia_dev and _ia_dev Notice that given that speculation windows are large, the policy is to kill the speculation on the first load and not worry if it can be completed with a dependent load/store [1]. [1] https://lore.kernel.org/lkml/20180423164740.GY17484@dhcp22.suse.cz/Signed-off-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by:
-
Greg Kroah-Hartman authored
Like commit 641114d2 ("RDMA: Directly cast the sockaddr union to sockaddr") we need to quiet gcc 9 from warning about this crazy union. That commit did not fix all of the warnings in 4.19 and older kernels because the logic in roce_resolve_route_from_path() was rewritten between 4.19 and 5.2 when that change happened. Cc: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
Sebastian Parschauer authored
commit 49869d2e upstream. The PixArt OEM mice are known for disconnecting every minute in runlevel 1 or 3 if they are not always polled. So add quirk ALWAYS_POLL for this one as well. Jonathan Teh (@jonathan-teh) reported and tested the quirk. Reference: https://github.com/sriemer/fix-linux-mouse/issues/15Signed-off-by:
Sebastian Parschauer <s.parschauer@gmx.de> CC: stable@vger.kernel.org Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Aaron Armstrong Skomra authored
commit 693c3dab upstream. The bit indicating BTN_6 on this device is overshifted by 2 bits, resulting in the incorrect button being reported. Also fix copy-paste mistake in comments. Signed-off-by:
Aaron Armstrong Skomra <aaron.skomra@wacom.com> Reviewed-by:
Ping Cheng <ping.cheng@wacom.com> Link: https://github.com/linuxwacom/xf86-input-wacom/issues/71 Fixes: c7f0522a ("HID: wacom: Slim down wacom_intuos_pad processing") Cc: <stable@vger.kernel.org> # v4.5+ Signed-off-by:
-
Dan Williams authored
commit ca6bf264 upstream. A multithreaded namespace creation/destruction stress test currently deadlocks with the following lockup signature: INFO: task ndctl:2924 blocked for more than 122 seconds. Tainted: G OE 5.2.0-rc4+ #3382 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. ndctl D 0 2924 1176 0x00000000 Call Trace: ? __schedule+0x27e/0x780 schedule+0x30/0xb0 wait_nvdimm_bus_probe_idle+0x8a/0xd0 [libnvdimm] ? finish_wait+0x80/0x80 uuid_store+0xe6/0x2e0 [libnvdimm] kernfs_fop_write+0xf0/0x1a0 vfs_write+0xb7/0x1b0 ksys_write+0x5c/0xd0 do_syscall_64+0x60/0x240 INFO: task ndctl:2923 blocked for more than 122 seconds. Tainted: G OE 5.2.0-rc4+ #3382 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. ndctl D 0 2923 1175 0x00000000 Call Trace: ? __schedule+0x27e/0x780 ? __mutex_lock+0x489/0x910 schedule+0x30/0xb0 schedule_preempt_disabled+0x11/0x20 __mutex_lock+0x48e/0x910 ? nvdimm_namespace_common_probe+0x95/0x4d0 [libnvdimm] ? __lock_acquire+0x23f/0x1710 ? nvdimm_namespace_common_probe+0x95/0x4d0 [libnvdimm] nvdimm_namespace_common_probe+0x95/0x4d0 [libnvdimm] __dax_pmem_probe+0x5e/0x210 [dax_pmem_core] ? nvdimm_bus_probe+0x1d0/0x2c0 [libnvdimm] dax_pmem_probe+0xc/0x20 [dax_pmem] nvdimm_bus_probe+0x90/0x2c0 [libnvdimm] really_probe+0xef/0x390 driver_probe_device+0xb4/0x100 In this sequence an 'nd_dax' device is being probed and trying to take the lock on its backing namespace to validate that the 'nd_dax' device indeed has exclusive access to the backing namespace. Meanwhile, another thread is trying to update the uuid property of that same backing namespace. So one thread is in the probe path trying to acquire the lock, and the other thread has acquired the lock and tries to flush the probe path. Fix this deadlock by not holding the namespace device_lock over the wait_nvdimm_bus_probe_idle() synchronization step. In turn this requires the device_lock to be held on entry to wait_nvdimm_bus_probe_idle() and subsequently dropped internally to wait_nvdimm_bus_probe_idle(). Cc: <stable@vger.kernel.org> Fixes: bf9bccc1 ("libnvdimm: pmem label sets and namespace instantiation") Cc: Vishal Verma <vishal.l.verma@intel.com> Tested-by:
Jane Chu <jane.chu@oracle.com> Link: https://lore.kernel.org/r/156341210094.292348.2384694131126767789.stgit@dwillia2-desk3.amr.corp.intel.comSigned-off-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Dan Williams authored
commit 6de5d06e upstream. In preparation for not holding a lock over the execution of nd_ioctl(), update the implementation to allow multiple threads to be attempting ioctls at the same time. The bus lock still prevents multiple in-flight ->ndctl() invocations from corrupting each other's state, but static global staging buffers are moved to the heap. Reported-by:
Vishal Verma <vishal.l.verma@intel.com> Reviewed-by:
-
