By default, set use_mtype_cc_wa to 1 to set PTE coherence flag MTYPE_CC
instead of MTYPE_RW by default. This is required for the time being to
mitigate a bug causing XCCs to hit stale data due to TCC marking fully
dirty lines as exclusive.
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Reviewed-by: Joseph Greathouse <Joseph.Greathouse@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Invalidate TLBs via a legacy flush request (flush_type=0) prior to the
heavyweight flush requests (flush_type=2) in gmc_v9_0.c. This is
temporarily required to mitigate a bug causing CPC UTCL1 to return stale
translations after invalidation requests in address range mode.

v2: squash in long term fix "drm/amdgpu: disable extra gfx943 legacy flush on rev1+"
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

For GFX 9.4.3 APP APU VRAM is allocated in GTT domain. While freeing
memory check for GTT domain instead of VRAM if it is APP APU
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

CPX compute mode is valid mode for NPS4 memory partition mode.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

VRAM pgmap resource is allocated every time when switching compute
partitions because kfd_dev is re-initialized by post_partition_switch,
As a result, it causes memory region resource leaking and system
memory usage accounting unbalanced.

pgmap resource should be allocated and registered only once when loading
driver and freed when unloading driver, move it from kfd_dev to
amdgpu_kfd_dev.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

RLC-PMFW handshake happens periodically when GFXCLK DPM is enabled and
halting RLC may cause unexpected results. Avoid halting RLC from driver
side.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Access registers with the right xcc id. Also, remove the unused logic as
PG is not used in GFX v9.4.3
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Increase the maximum number of queues that can be created per process
to 255 on GFX 9.4.3. There is no HWS limitation restricting the number
queues that can be created.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

It turns out STATUS_VALID_FLAG needs to be checked
ahead of any other fields. ADDRESS_VALID_FLAG and
ERR_INFO_VALID_FLAG only manages ADDRESS and ERR_INFO
field respectively. driver should continue poll
ERR CNT field even ERR_INFO_VALD_FLAG is not set.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Initialize jpeg v4_0_3 ras function.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add reset_ras_error_count callback for jpeg v4_0_3.
It will be used to reset jpeg ras error count.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add query_ras_error_count callback for jpeg v4_0_3.
It will be used to query and log jpeg error count.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

VCN RAS enablement sequence needs to be added in
DPG HW init sequence.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Initialize vcn v4_0_3 ras function
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add reset_ras_error_count callback for vcn v4_0_3.
It will be used to reset vcn ras error count.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add query_ras_error_count callback for vcn v4_0_3.
It will be used to query and log vcn error count.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add new ras error status registers introduced in
vcn v4_0_3 to log vcn and jpeg ras error.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

For SRIOV on some parts, the host driver does not post VBIOS. So the guest
cannot get bios information. Therefore, adev->virt.fw_reserve.p_pf2vf
and adev->mode_info.atom_context are NULL.
Signed-off-by: Gavin Wan <Gavin.Wan@amd.com>
Reviewed-by: Zhigang Luo <Zhigang.Luo@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

For SRIOV, the memory partitions are set on host drover. Each VF only
has one memory partition. We need set the memory partitions to 1 on
guest driver for SRIOV.

V2: sqaush in fix ("drm/amdgpu: Fix memory range info of GC 9.4.3 VFs")
Signed-off-by: Gavin Wan <Gavin.Wan@amd.com>
Acked-by: Zhigang Luo <zhigang.luo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

The MC_VM_FB_OFFSET is PF only register. It cannot be read on VF.
So, the driver should not use MC_VM_FB_OFFSET address to set the
address of dev->gmc.aper_base.
Signed-off-by: Gavin Wan <Gavin.Wan@amd.com>
Reviewed-by: Zhigang Luo <zhigang.luo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add PSP supporting PSP 13.0.6 SRIOV ucode init.
Signed-off-by: Gavin Wan <Gavin.Wan@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add PSP ring command interface for spatial partitioning.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Return error if an invalid compute partition mode is requested.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Keep a helper function to get description of compute partition mode.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

When aperture size is zero, there is no mapping done.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

On GFXIP 9.4.3, we dont need to rely on xGMI hive info to determine P2P
access.
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-and-tested-by: Mukul Joshi <mukul.joshi@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

For native mode, after amdgpu_bo is created on CPU domain, then call
amdgpu_ttm_tt_set_mem_pool to select the TTM pool using bo->mem_id.
ttm_bo_validate will allocate the memory to the correct memory partition
before mapping to GPUs.
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-and-tested-by: Mukul Joshi <mukul.joshi@amd.com>
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

For native mode only, create TTM pool for each memory partition to store
the NUMA node id, then the TTM pool will be selected using memory
partition id to allocate memory from the correct partition.
Acked-by: Christian König <christian.koenig@amd.com>
(rajneesh: changed need_swiotlb and need_dma32 to false for pool init)
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-and-tested-by: Mukul Joshi <mukul.joshi@amd.com>
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

ttm_pool_init is exported and used outside of ttm subsystem with
amdgpu_ttm interface, similarly export ttm_pool_fini for proper cleanup.
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

When auto mode is specified, driver will choose the right compute
partition mode.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Reviewed-by: Philip Yang <philip.yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Check the memory ranges available to the device also for deciding a
valid partition mode. Only select combinations are valid for a
particular mode.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Reviewed-by: Philip Yang <philip.yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Instead of start xcc id and number of xcc per node, use the xcc mask
which is the mask of logical ids of xccs belonging to a parition.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Fetch xcp information from xcp_mgr and also add xcc_mask to kfd node.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

After partition switch, fill all relevant xcp information before kfd
starts initialization.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Implement callbacks to fill memory node information in aquavanjaram.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add callback in xcp interface to fill xcp memory id information. Memory
id is used to identify the range/partition of an XCP from the available
memory partitions in device. Also, fill the id information.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

GC 9.4.3 ASICS may have memory split into multiple partitions.Initialize
the memory partition information for each range. The information may be
in the form of a numa node id or a range of pages.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Some ASICs have the device memory divided into multiple partitions. The
parititions could be denoted by a numa node or by a range of pages.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add interface to get numa information of ACPI XCC object. The interface
uses logical id to identify an XCC.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Use a struct to store additional numa node information including size
and base address. Add numa_info pointer to xcc object to point to the
relevant structure based on its proximity domain.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>