Merge in overtime fixes, no conflicts.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Whenever llc_ui_bind() and/or llc_ui_autobind()
took a reference on a netdevice but subsequently fail,
they must properly release their reference
or risk the infamous message from unregister_netdevice()
at device dismantle.

unregister_netdevice: waiting for eth0 to become free. Usage count = 3

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: 赵子轩 <beraphin@gmail.com>
Reported-by: Stoyan Manolov <smanolov@suse.de>
Link: https://lore.kernel.org/r/20220323004147.1990845-1-eric.dumazet@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

cpsw_ethtool_begin directly returns the result of pm_runtime_get_sync
when successful.
pm_runtime_get_sync returns -error code on failure and 0 on successful
resume but also 1 when the device is already active. So the common case
for cpsw_ethtool_begin is to return 1. That leads to inconsistent calls
to pm_runtime_put in the call-chain so that pm_runtime_put is called
one too many times and as result leaving the cpsw dev behind suspended.

The suspended cpsw dev leads to an access violation later on by
different parts of the cpsw driver.

Fix this by calling the return-friendly pm_runtime_resume_and_get
function.

Fixes: d43c65b0 ("ethtool: runtime-resume netdev parent in ethnl_ops_begin")
Signed-off-by: Jan Sondhauss <jan.sondhauss@wago.com>
Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20220323084725.65864-1-jan.sondhauss@wago.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Alexander Lobakin says:

====================
ice: avoid sleeping/scheduling in atomic contexts

The `ice_misc_intr() + ice_send_event_to_aux()` infamous pair failed
once again.
Fix yet another (hopefully last one) 'scheduling while atomic' splat
and finally plug the hole to gracefully return prematurely when
invoked in wrong context instead of panicking.
====================

Link: https://lore.kernel.org/r/20220323124353.2762181-1-alexandr.lobakin@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

ice_send_event_to_aux() eventually descends to mutex_lock()
(-> might_sched()), so it must not be called under non-task
context. However, at least two fixes have happened already for the
bug splats occurred due to this function being called from atomic
context.
To make the emergency landings softer, bail out early when executed
in non-task context emitting a warn splat only once. This way we
trade some events being potentially lost for system stability and
avoid any related hangs and crashes.

Fixes: 348048e7 ("ice: Implement iidc operations")
Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Tested-by: Michal Kubiak <michal.kubiak@intel.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Acked-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

There's a kernel BUG splat on processing aux critical error
interrupts in ice_misc_intr():

[ 2100.917085] BUG: scheduling while atomic: swapper/15/0/0x00010000
...
[ 2101.060770] Call Trace:
[ 2101.063229]  <IRQ>
[ 2101.065252]  dump_stack+0x41/0x60
[ 2101.068587]  __schedule_bug.cold.100+0x4c/0x58
[ 2101.073060]  __schedule+0x6a4/0x830
[ 2101.076570]  schedule+0x35/0xa0
[ 2101.079727]  schedule_preempt_disabled+0xa/0x10
[ 2101.084284]  __mutex_lock.isra.7+0x310/0x420
[ 2101.088580]  ? ice_misc_intr+0x201/0x2e0 [ice]
[ 2101.093078]  ice_send_event_to_aux+0x25/0x70 [ice]
[ 2101.097921]  ice_misc_intr+0x220/0x2e0 [ice]
[ 2101.102232]  __handle_irq_event_percpu+0x40/0x180
[ 2101.106965]  handle_irq_event_percpu+0x30/0x80
[ 2101.111434]  handle_irq_event+0x36/0x53
[ 2101.115292]  handle_edge_irq+0x82/0x190
[ 2101.119148]  handle_irq+0x1c/0x30
[ 2101.122480]  do_IRQ+0x49/0xd0
[ 2101.125465]  common_interrupt+0xf/0xf
[ 2101.129146]  </IRQ>
...

As Andrew correctly mentioned previously[0], the following call
ladder happens:

ice_misc_intr() <- hardirq
  ice_send_event_to_aux()
    device_lock()
      mutex_lock()
        might_sleep()
          might_resched() <- oops

Add a new PF state bit which indicates that an aux critical error
occurred and serve it in ice_service_task() in process context.
The new ice_pf::oicr_err_reg is read-write in both hardirq and
process contexts, but only 3 bits of non-critical data probably
aren't worth explicit synchronizing (and they're even in the same
byte [31:24]).

[0] https://lore.kernel.org/all/YeSRUVmrdmlUXHDn@lunn.ch

Fixes: 348048e7 ("ice: Implement iidc operations")
Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Tested-by: Michal Kubiak <michal.kubiak@intel.com>
Acked-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Seems like a potential copy-paste bug slipped in here,
the second memcpy should of course be populating src
and not dest.

Fixes: ab95465c ("net/sched: add vlan push_eth and pop_eth action to the hardware IR")
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Link: https://lore.kernel.org/r/20220323092506.21639-1-louis.peens@corigine.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Ensure that no bridge masters are ever considered for MST info
dumping. MST states are only supported on bridge ports, not bridge
masters - which br_mst_info_size relies on.

Fixes: 122c2948 ("net: bridge: mst: Support setting and reporting MST port states")
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Link: https://lore.kernel.org/r/20220322133001.16181-1-tobias@waldekranz.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Add the missing destroy_workqueue() before return from
prestera_module_init() in the error handling case.

Fixes: 4394fbcb ("net: marvell: prestera: handle fib notifications")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20220322090236.1439649-1-yangyingliang@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

All packets on ingress (except for jumbo) are terminated with a 4-bytes
CRC checksum. It's the responsability of the driver to strip those 4
bytes. Unfortunately a change dating back to March 2017 re-shuffled some
code and made the CRC stripping code effectively dead.

This change re-orders that part a bit such that the datalen is
immediately altered if needed.

Fixes: 4902a922 ("drivers: net: xgene: Add workaround for errata 10GE_8/ENET_11")
Cc: stable@vger.kernel.org
Signed-off-by: Stephane Graber <stgraber@ubuntu.com>
Tested-by: Stephane Graber <stgraber@ubuntu.com>
Link: https://lore.kernel.org/r/20220322224205.752795-1-stgraber@ubuntu.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Add missing netlink attribute policy and size calculation.
Also enable strict validation from this new attribute onwards.

Fixes: 435fe1c0 ("net: geneve: support IPv4/IPv6 as inner protocol")
Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
Link: https://lore.kernel.org/r/20220322043954.3042468-1-eyal.birger@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

DSA ports are stacked devices, so they use dev_mc_add() to sync their
address list to their lower interface (DSA master). But they are also
hardware devices, so they program those addresses to hardware using the
__dev_mc_add() sync and unsync callbacks.

Unfortunately both cannot work at the same time, and it seems that the
multicast addresses which are already present on the DSA master, like
33:33:00:00:00:01 (added by addrconf.c as in6addr_linklocal_allnodes)
are synced to the master via dev_mc_sync(), but not to hardware by
__dev_mc_sync().

This happens because both the dev_mc_sync() -> __hw_addr_sync_one()
code path, as well as __dev_mc_sync() -> __hw_addr_sync_dev(), operate
on the same variable: ha->sync_cnt, in a way that causes the "sync"
method (dsa_slave_sync_mc) to no longer be called.

To fix the issue we need to work with the API in the way in which it was
intended to be used, and therefore, call dev_uc_add() and friends for
each individual hardware address, from the sync and unsync callbacks.

Fixes: 5e8a1e03 ("net: dsa: install secondary unicast and multicast addresses as host FDB/MDB")
Link: https://lore.kernel.org/netdev/20220321163213.lrn5sk7m6grighbl@skbuf/Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220322003701.2056895-1-vladimir.oltean@nxp.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

When merged with Linus tree, the cited patch below will cause the
following build warning:

In function 'fortify_memset_chk',
    inlined from 'mlx5e_xmit_xdp_frame' at drivers/net/ethernet/mellanox/mlx5/core/en/xdp.c:438:3:
include/linux/fortify-string.h:242:25: error: call to '__write_overflow_field' declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Werror=attribute-warning]
  242 |                         __write_overflow_field(p_size_field, size);
      |                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Fix that by grouping the fields to memeset in struct_group() to avoid
the false alarm.

Fixes: 9ded70fa ("net/mlx5e: Don't prefill WQEs in XDP SQ in the multi buffer mode")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Suggested-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20220322172224.31849-1-saeed@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

When we're copying the PPAG table into the cmd structure we're failing
if the table doesn't exist in ACPI or is invalid, or if the FW doesn't
support PPAG setting etc.

This is wrong because those are valid scenarios.  Fix this by not
failing in those cases.

Fixes: e8e10a37 ("iwlwifi: acpi: move ppag code from mvm to fw/acpi")
Tested-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Acked-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/iwlwifi.20220322173828.fa47f369b717.I6a9c65149c2c3c11337f3a802dff22f514a3a436@changeidSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Alexei Starovoitov says:

====================
pull-request: bpf-next 2022-03-21 v2

We've added 137 non-merge commits during the last 17 day(s) which contain
a total of 143 files changed, 7123 insertions(+), 1092 deletions(-).

The main changes are:

1) Custom SEC() handling in libbpf, from Andrii.

2) subskeleton support, from Delyan.

3) Use btf_tag to recognize __percpu pointers in the verifier, from Hao.

4) Fix net.core.bpf_jit_harden race, from Hou.

5) Fix bpf_sk_lookup remote_port on big-endian, from Jakub.

6) Introduce fprobe (multi kprobe) _without_ arch bits, from Masami.
The arch specific bits will come later.

7) Introduce multi_kprobe bpf programs on top of fprobe, from Jiri.

8) Enable non-atomic allocations in local storage, from Joanne.

9) Various var_off ptr_to_btf_id fixed, from Kumar.

10) bpf_ima_file_hash helper, from Roberto.

11) Add "live packet" mode for XDP in BPF_PROG_RUN, from Toke.

* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (137 commits)
  selftests/bpf: Fix kprobe_multi test.
  Revert "rethook: x86: Add rethook x86 implementation"
  Revert "arm64: rethook: Add arm64 rethook implementation"
  Revert "powerpc: Add rethook support"
  Revert "ARM: rethook: Add rethook arm implementation"
  bpftool: Fix a bug in subskeleton code generation
  bpf: Fix bpf_prog_pack when PMU_SIZE is not defined
  bpf: Fix bpf_prog_pack for multi-node setup
  bpf: Fix warning for cast from restricted gfp_t in verifier
  bpf, arm: Fix various typos in comments
  libbpf: Close fd in bpf_object__reuse_map
  bpftool: Fix print error when show bpf map
  bpf: Fix kprobe_multi return probe backtrace
  Revert "bpf: Add support to inline bpf_get_func_ip helper on x86"
  bpf: Simplify check in btf_parse_hdr()
  selftests/bpf/test_lirc_mode2.sh: Exit with proper code
  bpf: Check for NULL return from bpf_get_btf_vmlinux
  selftests/bpf: Test skipping stacktrace
  bpf: Adjust BPF stack helper functions to accommodate skip > 0
  bpf: Select proper size for bpf_prog_pack
  ...
====================

Link: https://lore.kernel.org/r/20220322050159.5507-1-alexei.starovoitov@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

When compiler emits endbr insn the function address could
be different than what bpf_get_func_ip() reports.
This is a short term workaround.
bpf_get_func_ip() will be fixed later.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

This reverts commit 75caf33e.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

This reverts commit 83acdce6.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

This reverts commit 02752bd9.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

This reverts commit 515a4917.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Building htmldocs complains:
  include/linux/netdevice.h:2295: warning: Function parameter or member 'dm_private' not described in 'net_device'

Fixes: b26ef81c ("drop_monitor: remove quadratic behavior")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20220322051053.1883186-1-kuba@kernel.orgSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Call br_mst_info_size() only if vg pointer is not NULL.

general protection fault, probably for non-canonical address 0xdffffc0000000058: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x00000000000002c0-0x00000000000002c7]
CPU: 0 PID: 975 Comm: syz-executor.0 Tainted: G        W         5.17.0-next-20220321-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:br_mst_info_size+0x97/0x270 net/bridge/br_mst.c:242
Code: 00 00 31 c0 e8 ba 10 53 f9 31 c0 b9 40 00 00 00 4c 8d 6c 24 30 4c 89 ef f3 48 ab 48 8d 83 c0 02 00 00 48 89 04 24 48 c1 e8 03 <80> 3c 28 00 0f 85 ae 01 00 00 48 8b 83 c0 02 00 00 41 bf 04 00 00
RSP: 0018:ffffc900153770a8 EFLAGS: 00010202
RAX: 0000000000000058 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000040000 RSI: ffffffff88259876 RDI: ffffc900153772d8
RBP: dffffc0000000000 R08: 0000000000000000 R09: ffffffff8db68957
R10: ffffffff881f737b R11: 0000000000000000 R12: 0000000000000000
R13: ffffc900153770d8 R14: 00000000000002a0 R15: 00000000ffffffff
FS:  00007f18bbb6f700(0000) GS:ffff8880b9c00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020001a80 CR3: 000000001a7d9000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 00000000000000d8 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <TASK>
 br_get_link_af_size_filtered+0x6e9/0xc00 net/bridge/br_netlink.c:123
 rtnl_link_get_af_size net/core/rtnetlink.c:598 [inline]
 if_nlmsg_size+0x40c/0xa50 net/core/rtnetlink.c:1040
 rtnl_calcit.isra.0+0x25f/0x460 net/core/rtnetlink.c:3780
 rtnetlink_rcv_msg+0xa65/0xb80 net/core/rtnetlink.c:5937
 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2496
 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline]
 netlink_unicast+0x543/0x7f0 net/netlink/af_netlink.c:1345
 netlink_sendmsg+0x904/0xe00 net/netlink/af_netlink.c:1921
 sock_sendmsg_nosec net/socket.c:705 [inline]
 sock_sendmsg+0xcf/0x120 net/socket.c:725
 ____sys_sendmsg+0x6e8/0x810 net/socket.c:2413
 ___sys_sendmsg+0xf3/0x170 net/socket.c:2467
 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2496
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x35/0x80 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f18baa89049
Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f18bbb6f168 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007f18bab9bf60 RCX: 00007f18baa89049
RDX: 0000000000000000 RSI: 0000000020001a80 RDI: 0000000000000004
RBP: 00007f18baae308d R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007ffeedb2be2f R14: 00007f18bbb6f300 R15: 0000000000022000
 </TASK>
Modules linked in:
---[ end trace 0000000000000000 ]---
RIP: 0010:br_mst_info_size+0x97/0x270 net/bridge/br_mst.c:242
Code: 00 00 31 c0 e8 ba 10 53 f9 31 c0 b9 40 00 00 00 4c 8d 6c 24 30 4c 89 ef f3 48 ab 48 8d 83 c0 02 00 00 48 89 04 24 48 c1 e8 03 <80> 3c 28 00 0f 85 ae 01 00 00 48 8b 83 c0 02 00 00 41 bf 04 00 00
RSP: 0018:ffffc900153770a8 EFLAGS: 00010202
RAX: 0000000000000058 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000040000 RSI: ffffffff88259876 RDI: ffffc900153772d8
RBP: dffffc0000000000 R08: 0000000000000000 R09: ffffffff8db68957
R10: ffffffff881f737b R11: 0000000000000000 R12: 0000000000000000
R13: ffffc900153770d8 R14: 00000000000002a0 R15: 00000000ffffffff
FS:  00007f18bbb6f700(0000) GS:ffff8880b9c00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000001b2ca22000 CR3: 000000001a7d9000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 00000000000000d8 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400

Fixes: 122c2948 ("net: bridge: mst: Support setting and reporting MST port states")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Tobias Waldekranz <tobias@waldekranz.com>
Cc: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Tobias Waldekranz <tobias@waldekranz.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20220322012314.795187-1-eric.dumazet@gmail.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Ido Schimmel says:

====================
selftests: forwarding: Locked bridge port fixes

Two fixes for the locked bridge port selftest.
====================

Link: https://lore.kernel.org/r/20220321175102.978020-1-idosch@nvidia.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

The test creates a separate VRF for the VLAN upper, but does not destroy
it during cleanup, resulting in "RTNETLINK answers: File exists" errors.

Fix by using the same VRF for the port and its VLAN upper. This is OK
since their IP addresses do not overlap.

Before:

 # ./bridge_locked_port.sh
 TEST: Locked port ipv4                                              [ OK ]
 TEST: Locked port ipv6                                              [ OK ]
 TEST: Locked port vlan                                              [ OK ]

 # ./bridge_locked_port.sh
 RTNETLINK answers: File exists
 RTNETLINK answers: File exists
 RTNETLINK answers: File exists
 RTNETLINK answers: File exists
 RTNETLINK answers: File exists
 RTNETLINK answers: File exists
 TEST: Locked port ipv4                                              [ OK ]
 TEST: Locked port ipv6                                              [ OK ]
 TEST: Locked port vlan                                              [ OK ]

After:

 # ./bridge_locked_port.sh
 TEST: Locked port ipv4                                              [ OK ]
 TEST: Locked port ipv6                                              [ OK ]
 TEST: Locked port vlan                                              [ OK ]

 # ./bridge_locked_port.sh
 TEST: Locked port ipv4                                              [ OK ]
 TEST: Locked port ipv6                                              [ OK ]
 TEST: Locked port vlan                                              [ OK ]

Fixes: b2b681a4 ("selftests: forwarding: tests of locked port feature")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Disable learning before bringing the bridge port up in order to avoid
the FDB being populated and the test failing.

Before:

 # ./bridge_locked_port.sh
 RTNETLINK answers: File exists
 TEST: Locked port ipv4                                              [FAIL]
         Ping worked after locking port, but before adding FDB entry
 TEST: Locked port ipv6                                              [ OK ]
 TEST: Locked port vlan                                              [ OK ]

After:

 # ./bridge_locked_port.sh
 TEST: Locked port ipv4                                              [ OK ]
 TEST: Locked port ipv6                                              [ OK ]
 TEST: Locked port vlan                                              [ OK ]

Fixes: b2b681a4 ("selftests: forwarding: tests of locked port feature")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

In the timer callback function tipc_sk_timeout(), we're trying to
reschedule another timeout to retransmit a setup request if destination
link is congested. But we use the incorrect timeout value
(msecs_to_jiffies(100)) instead of (jiffies + msecs_to_jiffies(100)),
so that the timer expires immediately, it's irrelevant for original
description.

In this commit we correct the timeout value in sk_reset_timer()

Fixes: 67879274 ("tipc: buffer overflow handling in listener socket")
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Hoang Le <hoang.h.le@dektech.com.au>
Link: https://lore.kernel.org/r/20220321042229.314288-1-hoang.h.le@dektech.com.auSigned-off-by: Paolo Abeni <pabeni@redhat.com>

The original behavior was to print out unsigned short or unsigned char
values. The change in commit d65aea8e ("bnx2x: use correct format
characters") prints out the whole value if not truncated. So truncate
the value to an unsigned {short|char} to retain the original behavior.

Fixes: d65aea8e ("bnx2x: use correct format characters")
Link: https://github.com/ClangBuiltLinux/linux/issues/378Signed-off-by: Bill Wendling <morbo@google.com>
Link: https://lore.kernel.org/r/20220321023155.106066-1-morbo@google.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

It should check dmux->tx after calling dma_request_chan().

Fixes: 21a0ffd9 ("net: wwan: Add Qualcomm BAM-DMUX WWAN network driver")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20220319032450.3288224-1-yangyingliang@huawei.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Michael Walle says:

====================
net: mscc-miim: add integrated PHY reset support

The MDIO driver has support to release the integrated PHYs from reset.
This was implemented for the SparX-5 for now. Now add support for the
LAN966x, too.
====================

Link: https://lore.kernel.org/r/20220318201324.1647416-1-michael@walle.ccSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The LAN966x has two internal PHYs which are in reset by default. The
driver already supported the internal PHYs of the SparX-5. Now add
support for the LAN966x, too. Add a new compatible to distinguish them.

The LAN966x has additional control bits in this register, thus convert
the regmap_write() to regmap_update_bits() to leave the remaining bits
untouched. This doesn't change anything for the SparX-5 SoC, because
there, the register consists only of reset bits.
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Replace the magic numbers by macros which are already defined. It seems
the original commit missed to use them.
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The MDIO controller has support to release the internal PHYs from reset
by specifying a second memory resource. This is different between the
currently supported SparX-5 and the LAN966x. Add a new compatible to
distinguish between these two.
Signed-off-by: Michael Walle <michael@walle.cc>
Acked-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

DSA probing is atypical because a tree of devices must probe all at
once, so out of N switches which call dsa_tree_setup_routing_table()
during probe, for (N - 1) of them, "complete" will return false and they
will exit probing early. The Nth switch will set up the whole tree on
their behalf.

The implication is that for (N - 1) switches, the driver binds to the
device successfully, without doing anything. When the driver is bound,
the ->shutdown() method may run. But if the Nth switch has failed to
initialize the tree, there is nothing to do for the (N - 1) driver
instances, since the slave devices have not been created, etc. Moreover,
dsa_switch_shutdown() expects that the calling @ds has been in fact
initialized, so it jumps at dereferencing the various data structures,
which is incorrect.

Avoid the ensuing NULL pointer dereferences by simply checking whether
the Nth switch has previously set "ds->setup = true" for the switch
which is currently shutting down. The entire setup is serialized under
dsa2_mutex which we already hold.

Fixes: 0650bf52 ("net: dsa: be compatible with masters which unregister on shutdown")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20220318195443.275026-1-vladimir.oltean@nxp.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

During NAT, a tuple collision may occur.  When this happens, openvswitch
will make a second pass through NAT which will perform additional packet
modification.  This will update the skb data, but not the flow key that
OVS uses.  This means that future flow lookups, and packet matches will
have incorrect data.  This has been supported since
5d50aa83 ("openvswitch: support asymmetric conntrack").

That commit failed to properly update the sw_flow_key attributes, since
it only called the ovs_ct_nat_update_key once, rather than each time
ovs_ct_nat_execute was called.  As these two operations are linked, the
ovs_ct_nat_execute() function should always make sure that the
sw_flow_key is updated after a successful call through NAT infrastructure.

Fixes: 5d50aa83 ("openvswitch: support asymmetric conntrack")
Cc: Dumitru Ceara <dceara@redhat.com>
Cc: Numan Siddique <nusiddiq@redhat.com>
Signed-off-by: Aaron Conole <aconole@redhat.com>
Acked-by: Eelco Chaudron <echaudro@redhat.com>
Link: https://lore.kernel.org/r/20220318124319.3056455-1-aconole@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Some chips using the split VTU/STU design will not accept VTU entries
who's SID points to an invalid STU entry. Therefore, mark all those
chips with either the mv88e6352_g1_stu_* or mv88e6390_g1_stu_* ops as
appropriate.

Notably, chips for the Opal Plus (6085/6097) era seem to use a
different implementation than those from Agate (6352) and onwards,
even though their external interface is the same. The former happily
accepts VTU entries referencing invalid STU entries, while the latter
does not.

This fixes an issue where the driver would fail to probe switch trees
that contained chips of the Agate/Topaz generation which did not
declare STU support, as loaded VTU entries would be read back as
invalid.

Fixes: 49c98c1d ("net: dsa: mv88e6xxx: Disentangle STU from VTU")
Reported-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Tested-by: Marek Behún <kabel@kernel.org>
Link: https://lore.kernel.org/r/20220319110345.555270-1-tobias@waldekranz.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

`cur64`, `start64` and `ts_delta` are int64_t. Change format
specifiers in fprintf from `"%lu"` to `"%" PRId64` to adapt
to 32-bit and 64-bit systems.
Signed-off-by: Guo Zhengkui <guozhengkui@vivo.com>
Link: https://lore.kernel.org/r/20220319073730.5235-1-guozhengkui@vivo.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The Felix switch has 6 ports, 2 of which are internal.
Due to some misunderstanding, my initial suggestion for
vsc9959_port_modes[]:
https://patchwork.kernel.org/project/netdevbpf/patch/20220129220221.2823127-10-colin.foster@in-advantage.com/#24718277

got translated by Colin into a 5-port array, leading to an all-zero port
mode mask for port 5.

Fixes: acf242fc ("net: dsa: felix: remove prevalidate_phy_mode interface")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220318195812.276276-1-vladimir.oltean@nxp.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Tobias Waldekranz says:

====================
net: dsa: mv88e6xxx: MST Fixes

1/2 fixes the issue reported by Marek here:

https://lore.kernel.org/netdev/20220318182817.5ade8ecd@dellmb/

2/2 adds a missing capability check to the new .vlan_msti_set
callback.
====================

Link: https://lore.kernel.org/r/20220318201321.4010543-1-tobias@waldekranz.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

In the same way that we check for STU support in the MST state
callback, we should also verify it before trying to change a VLANs
MSTI membership.

Fixes: acaf4d2e ("net: dsa: mv88e6xxx: MST Offloading")
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Simply having a physical STU table in the device doesn't do us any
good if there's no implementation of the relevant ops to access that
table. So ensure that chips that claim STU support can also talk to
the hardware.

This fixes an issue where chips that had a their ->info->max_sid
set (due to their family membership), but no implementation (due to
their chip-specific ops struct) would fail to probe.

Fixes: 49c98c1d ("net: dsa: mv88e6xxx: Disentangle STU from VTU")
Reported-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>