When Core Performance Boost is disabled by the user, the
CPPC_REQ.max_perf should not exceed the nominal_perf since by definition
the frequencies between nominal_perf and the highest_perf are in the
boost range. Fix this in amd_pstate_update()
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Perry Yuan <Perry.Yuan@amd.com>
Link: https://lore.kernel.org/r/66f55232be01092c423f0523f68b82b80c293943.1718988436.git.perry.yuan@amd.com
Link: https://lore.kernel.org/r/20240626042733.3747-4-mario.limonciello@amd.comSigned-off-by: Mario Limonciello <mario.limonciello@amd.com>

The "Core Performance Boost (CPB) feature, when enabled in the BIOS,
allows the OS to control the highest performance for each individual
core. The active, passive and the guided modes of the amd-pstate driver
do support controlling the core frequency boost when this BIOS feature
is enabled. Additionally, the amd-pstate driver provides a sysfs
interface allowing the user to activate/deactivate this core performance
boost feature at runtime.

Add support for the set_boost callback in the active mode driver to
enable boost control via the cpufreq core. This ensures a consistent
boost control interface across all pstate modes, including passive
mode, guided mode, and active mode.

With this addition, all three pstate modes can support the same boost
control interface with unique interface and global CPB control. Each
CPU also supports individual boost control, allowing global CPB to
change all cores' boost states simultaneously. Specific CPUs can
update their boost states separately, ensuring all cores' boost
states are synchronized.

Cc: Oleksandr Natalenko <oleksandr@natalenko.name>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217931Signed-off-by: Perry Yuan <Perry.Yuan@amd.com>
Co-developed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Link: https://lore.kernel.org/r/20240626042733.3747-3-mario.limonciello@amd.comSigned-off-by: Mario Limonciello <mario.limonciello@amd.com>

There are some other drivers also need to use the
MSR_K7_HWCR_CPB_DIS_BIT for CPB control bit, so it makes sense to move
the definition to a common header file to allow other driver to use it.

No intentional functional impact.
Suggested-by: Gautham Ranjal Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Acked-by: Huang Rui <ray.huang@amd.com>
Link: https://lore.kernel.org/r/78b6c75e6cffddce3e950dd543af6ae9f8eeccc3.1718988436.git.perry.yuan@amd.com
Link: https://lore.kernel.org/r/20240626042733.3747-2-mario.limonciello@amd.comSigned-off-by: Mario Limonciello <mario.limonciello@amd.com>

Update the cpufreq store function to use kstrtobool for parsing boolean
values. This simplifies the code and improves readability by using a
standard kernel function for boolean string conversion.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Link: https://lore.kernel.org/r/d392eba3bad1231776124c321cef8c184ce1482d.1718988436.git.perry.yuan@amd.comSigned-off-by: Mario Limonciello <mario.limonciello@amd.com>

If driver registration fails then immediately return the failure
instead of continuing to register attributes.

This fixes issues of falling back from amd-pstate to other drivers
when cpufreq init has failed for any reason.

Reported-by: alex.s.cochran@proton.me
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Reviewed-by: Perry Yuan <Perry.Yuan@amd.com>
Link: https://lore.kernel.org/r/20240623200918.52104-1-mario.limonciello@amd.comSigned-off-by: Mario Limonciello <mario.limonciello@amd.com>

As the unit tests use a symbol from the driver an explicit dependency
is required.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202406222016.R4A2TMs8-lkp@intel.com/Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Reviewed-by: Perry Yuan <Perry.Yuan@amd.com>
Link: https://lore.kernel.org/r/20240622215219.47911-1-mario.limonciello@amd.comSigned-off-by: Mario Limonciello <mario.limonciello@amd.com>

When scaling min/max freq values were being setted,
the value of policy->cur need to update.
Signed-off-by: Meng Li <li.meng@amd.com>
Acked-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20240227071133.3405003-1-li.meng@amd.comSigned-off-by: Mario Limonciello <mario.limonciello@amd.com>

If the `amd-pstate` driver is not loaded automatically by default,
it is because the kernel command line parameter has not been added.
To resolve this issue, it is necessary to call the `amd_pstate_set_driver()`
function to enable the desired mode (passive/active/guided) before registering
the driver instance.

This ensures that the driver is loaded correctly without relying on the kernel
command line parameter.

When there is no parameter added to command line, Kernel config will
provide the default mode to load.

Meanwhile, user can add driver mode in command line which will override
the kernel config default option.
Reported-by: Andrei Amuraritei <andamu@posteo.net>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218705Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/83301c4cea4f92fb19e14b23f2bac7facfd8bdbb.1718811234.git.perry.yuan@amd.comSigned-off-by: Mario Limonciello <mario.limonciello@amd.com>

The amd-pstate-epp driver has been implemented and resolves the
performance drop issue seen in passive mode for shared memory type
CPPC systems. Users who enable the active mode driver will not
experience a performance drop compared to the passive mode driver.
Therefore, the EPP driver should be loaded by default for shared
memory type CPPC system to get better performance.
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/c705507cf3ee790e544251cfd897ed11e8e57712.1718811234.git.perry.yuan@amd.comSigned-off-by: Mario Limonciello <mario.limonciello@amd.com>

replace the usage of the deprecated boot_cpu_has() function with
the modern cpu_feature_enabled() function. The switch to cpu_feature_enabled()
ensures compatibility with the latest CPU feature detection mechanisms and
improves code maintainability.
Acked-by: Mario Limonciello <mario.limonciello@amd.com>
Suggested-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Link: https://lore.kernel.org/r/f1567593ac5e1d38343067e9c681a8c4b0707038.1718811234.git.perry.yuan@amd.comSigned-off-by: Mario Limonciello <mario.limonciello@amd.com>

the guided mode is also supported, so the operation mode should include
that mode as well.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Link: https://lore.kernel.org/r/a61d825ef71f6aacc8f1624fe9fb982b8446b5a7.1718811234.git.perry.yuan@amd.comSigned-off-by: Mario Limonciello <mario.limonciello@amd.com>

If CPPC feature is supported by the CPU however the CPUID flag bit is not
set by SBIOS, the `amd_pstate` will be failed to load while system
booting.
So adding one more debug message to inform user to check the SBIOS setting,
The change also can help maintainers to debug why amd_pstate driver failed
to be loaded at system booting if the processor support CPPC.

Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218686Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Acked-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/42c953616ac121bd1e5c329e83d015a02e6b32c7.1718811234.git.perry.yuan@amd.comSigned-off-by: Mario Limonciello <mario.limonciello@amd.com>

Add CPU ID checking in case the driver attempt to load on systems where
CPPC functionality is unavailable. And the warning message will not
be shown if CPPC is not supported.

It will also print debug message if the CPU has no CPPC support that
helps to debug the driver loading failure issue.
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Closes: https://lore.kernel.org/linux-pm/CYYPR12MB8655D32EA18574C9497E888A9C122@CYYPR12MB8655.namprd12.prod.outlook.com/T/#tSigned-off-by: Perry Yuan <perry.yuan@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Acked-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/437dbd581a4119465581330081d9b1e289482ba2.1718811234.git.perry.yuan@amd.comSigned-off-by: Mario Limonciello <mario.limonciello@amd.com>

removed the unused variable `nominal_freq` for build warning.
This variable was defined and assigned a value in the previous code,
but it was not used in the subsequent code.

Closes: https://lore.kernel.org/oe-kbuild-all/202405080431.BPU6Yg9s-lkp@intel.com/Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Acked-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/b7ef41557f71d40d098393ddb27f0fe1f23648ae.1718811234.git.perry.yuan@amd.comSigned-off-by: Mario Limonciello <mario.limonciello@amd.com>

To enhance the debugging capability of the driver loading failure for
broken CPPC ACPI tables, it can optimize the expression by moving the
verification of `min_freq`, `nominal_freq`, and other dependency values
to the `amd_pstate_init_freq()` function where they are initialized.
If any of these values are incorrect, the `amd-pstate` driver will not be registered.

By ensuring that these values are correct before they are used, it will facilitate
the debugging process when encountering driver loading failures due to faulty CPPC
ACPI tables from BIOS
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Acked-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Acked-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/f9793f8451c1832e34cc9dc35f89c653b39cfe38.1718811234.git.perry.yuan@amd.comSigned-off-by: Mario Limonciello <mario.limonciello@amd.com>

The EPP string for 'default' represents what the firmware had configured
as the default EPP value but once a user changes EPP to another string
they can't reset it back to 'default'.

Cache the firmware EPP value and allow the user to write 'default' using
this value.
Reported-by: Artem S. Tashkinov <aros@gmx.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217931#c61Reviewed-by: Perry Yuan <perry.yuan@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>

Some of AMD ZEN4 APU/CPU have support for adjusting the CPU core
clock more quickly and presicely according to CPU work loading.
This is advertised by the Fast CPPC x86 feature.
This change will only be effective in the *passive mode* of
AMD pstate driver. From the test results of different
transition delay values, 600us is chosen to make a balance
between performance and power consumption.

Some test results on AMD Ryzen 7840HS(Phoenix) APU:

1. Tbench
(Energy less is better, Throughput more is better,
PPW--Performance per Watt more is better)
============= =================== ============== =============== ============== =============== ============== =============== ===============
 Trans Delay   Tbench              governor:schedutil, 3-iterations average
============= =================== ============== =============== ============== =============== ============== =============== ===============
 1000us        Clients             1              2               4              8              12             16              32
               Energy/Joules       2010           2804            8768           17171          16170          15132           15027
               Throughput/(MB/s)   114            259             1041           3010           3135           4851            4605
               PPW                 0.0567         0.0923          0.1187         0.1752         0.1938         0.3205          0.3064
 600us         Clients             1              2               4              8              12             16              32
               Energy/Joules       2115  (5.22%)  2388  (-14.84%) 10700(22.03%)  16716 (-2.65%) 15939 (-1.43%) 15053 (-0.52%)  15083 (0.37% )
               Throughput/(MB/s)   122   (7.02%)  234   (-9.65% ) 1188 (14.12%)  3003  (-0.23%) 3143  (0.26% ) 4842  (-0.19%)  4603  (-0.04%)
               PPW                 0.0576(1.59%)  0.0979(6.07%  ) 0.111(-6.49%)  0.1796(2.51% ) 0.1971(1.70% ) 0.3216(0.34% )  0.3051(-0.42%)
============= =================== ============== ================ ============= =============== ============== =============== ===============

2.Dbench
(Energy less is better, Throughput more is better,
PPW--Performance per Watt more is better)
============= =================== ============== =============== ============== =============== ============== =============== ===============
 Trans Delay   Dbench              governor:schedutil, 3-iterations average
============= =================== ============== =============== ============== =============== ============== =============== ===============
 1000us        Clients             1             2               4              8               12             16              32
               Energy/Joules       4890          3779            3567           5157            5611           6500            8163
               Throughput/(MB/s)   327           167             220            577             775            938             1397
               PPW                 0.0668        0.0441          0.0616         0.1118          0.1381         0.1443          0.1711
 600us         Clients             1             2               4              8               12             16              32
               Energy/Joules       4915  (0.51%) 4912  (29.98%)  3506  (-1.71%) 4907  (-4.85% ) 5011 (-10.69%) 5672  (-12.74%) 8141  (-0.27%)
               Throughput/(MB/s)   348   (6.42%) 284   (70.06%)  220   (0.00% ) 518   (-10.23%) 712  (-8.13% ) 854   (-8.96% ) 1475  (5.58% )
               PPW                 0.0708(5.99%) 0.0578(31.07%)  0.0627(1.79% ) 0.1055(-5.64% ) 0.142(2.82%  ) 0.1505(4.30%  ) 0.1811(5.84% )
============= =================== ============== =============== ============== =============== ============== =============== ===============

3.Hackbench(less time is better)
============= =========================== ==========================
  hackbench     governor:schedutil
============= =========================== ==========================
  Trans Delay   Process Mode Ave time(s)  Thread Mode Ave time(s)
  1000us        14.484                      14.484
  600us         14.418(-0.46%)              15.41(+6.39%)
============= =========================== ==========================

4.Perf_sched_bench(less time is better)
============= =================== ============== ============== ============== =============== =============== =============
 Trans Delay  perf_sched_bench    governor:schedutil
============= =================== ============== ============== ============== =============== =============== =============
  1000us        Groups             1             2              4              8               12              24
                AveTime(s)        1.64          2.851          5.878          11.636          16.093          26.395
  600us         Groups             1             2              4              8               12              24
                AveTime(s)        1.69(3.05%)   2.845(-0.21%)  5.843(-0.60%)  11.576(-0.52%)  16.092(-0.01%)  26.32(-0.28%)
============= ================== ============== ============== ============== =============== =============== ==============

5.Sysbench(higher is better)
============= ================== ============== ================= ============== ================ =============== =================
  Sysbench    governor:schedutil
============= ================== ============== ================= ============== ================ =============== =================
  1000us      Thread             1               2                4              8                12               24
              Ave events         6020.98         12273.39         24119.82       46171.57         47074.37         47831.72
  600us       Thread             1               2                4              8                12               24
              Ave events         6154.82(2.22%)  12271.63(-0.01%) 24392.5(1.13%) 46117.64(-0.12%) 46852.19(-0.47%) 47678.92(-0.32%)
============= ================== ============== ================= ============== ================ =============== =================

In conclusion, a shorter transition delay
of cpu clock will make a quite positive effect to improve PPW
on Dbench test, in the meanwhile, keep stable performance
on Tbench, Hackbench, Perf_sched_bench and Sysbench.
Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Reviewed-by: Perry Yuan <perry.yuan@amd.com>
Acked-by: Mario Limonciello <mario.limonciello@amd.com>

Some AMD Zen 4 processors support a new feature FAST CPPC which
allows for a faster CPPC loop due to internal architectural
enhancements. The goal of this faster loop is higher performance
at the same power consumption.

Reference:
See the page 99 of PPR for AMD Family 19h Model 61h rev.B1, docID 56713
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de>

Merge tag 'perf-tools-fixes-for-v6.10-2-2024-06-09' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools

Pull perf tools fixes from Arnaldo Carvalho de Melo:

 - Update copies of kernel headers, which resulted in support for the
   new 'mseal' syscall, SUBVOL statx return mask bit, RISC-V and PPC
   prctls, fcntl's DUPFD_QUERY, POSTED_MSI_NOTIFICATION IRQ vector,
   'map_shadow_stack' syscall for x86-32.

 - Revert perf.data record memory allocation optimization that ended up
   causing a regression, work is being done to re-introduce it in the
   next merge window.

 - Fix handling of minimal vmlinux.h file used with BPF's CO-RE when
   interrupting the build.

* tag 'perf-tools-fixes-for-v6.10-2-2024-06-09' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
  perf bpf: Fix handling of minimal vmlinux.h file when interrupting the build
  Revert "perf record: Reduce memory for recording PERF_RECORD_LOST_SAMPLES event"
  tools headers arm64: Sync arm64's cputype.h with the kernel sources
  tools headers uapi: Sync linux/stat.h with the kernel sources to pick STATX_SUBVOL
  tools headers UAPI: Update i915_drm.h with the kernel sources
  tools headers UAPI: Sync kvm headers with the kernel sources
  tools arch x86: Sync the msr-index.h copy with the kernel sources
  tools headers: Update the syscall tables and unistd.h, mostly to support the new 'mseal' syscall
  perf trace beauty: Update the arch/x86/include/asm/irq_vectors.h copy with the kernel sources to pick POSTED_MSI_NOTIFICATION
  perf beauty: Update copy of linux/socket.h with the kernel sources
  tools headers UAPI: Sync fcntl.h with the kernel sources to pick F_DUPFD_QUERY
  tools headers UAPI: Sync linux/prctl.h with the kernel sources
  tools include UAPI: Sync linux/stat.h with the kernel sources

Pull EDAC fixes from Borislav Petkov:

 - Convert PCI core error codes to proper error numbers since latter get
   propagated all the way up to the module loading functions

* tag 'edac_urgent_for_v6.10_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
  EDAC/igen6: Convert PCIBIOS_* return codes to errnos
  EDAC/amd64: Convert PCIBIOS_* return codes to errnos

Pull clk fix from Stephen Boyd:
 "One fix for the SiFive PRCI clocks so that the device boots again.

  This driver was registering clkdev lookups that were always going to
  be useless. This wasn't a problem until clkdev started returning an
  error in these cases, causing this driver to fail probe, and thus boot
  to fail because clks are essential for most drivers. The fix is
  simple, don't use clkdev because this is a DT based system where
  clkdev isn't used"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: sifive: Do not register clkdevs for PRCI clocks

Pull smb client fixes from Steve French:
 "Two small smb3 client fixes:

   - fix deadlock in umount

   - minor cleanup due to netfs change"

* tag '6.10-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: Don't advance the I/O iterator before terminating subrequest
  smb: client: fix deadlock in smb2_find_smb_tcon()

Pull HID fixes from Benjamin Tissoires:

 - fix potential read out of bounds in hid-asus (Andrew Ballance)

 - fix endian-conversion on little endian systems in intel-ish-hid (Arnd
   Bergmann)

 - A couple of new input event codes (Aseda Aboagye)

 - errors handling fixes in hid-nvidia-shield (Chen Ni), hid-nintendo
   (Christophe JAILLET), hid-logitech-dj (José Expósito)

 - current leakage fix while the device is in suspend on a i2c-hid
   laptop (Johan Hovold)

 - other assorted smaller fixes and device ID / quirk entry additions

* tag 'for-linus-2024060801' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
  HID: Ignore battery for ELAN touchscreens 2F2C and 4116
  HID: i2c-hid: elan: fix reset suspend current leakage
  dt-bindings: HID: i2c-hid: elan: add 'no-reset-on-power-off' property
  dt-bindings: HID: i2c-hid: elan: add Elan eKTH5015M
  dt-bindings: HID: i2c-hid: add dedicated Ilitek ILI2901 schema
  input: Add support for "Do Not Disturb"
  input: Add event code for accessibility key
  hid: asus: asus_report_fixup: fix potential read out of bounds
  HID: logitech-hidpp: add missing MODULE_DESCRIPTION() macro
  HID: intel-ish-hid: fix endian-conversion
  HID: nintendo: Fix an error handling path in nintendo_hid_probe()
  HID: logitech-dj: Fix memory leak in logi_dj_recv_switch_to_dj_mode()
  HID: core: remove unnecessary WARN_ON() in implement()
  HID: nvidia-shield: Add missing check for input_ff_create_memless
  HID: intel-ish-hid: Fix build error for COMPILE_TEST

Merge tag 'kbuild-fixes-v6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - Fix the initial state of the save button in 'make gconfig'

 - Improve the Kconfig documentation

 - Fix a Kconfig bug regarding property visibility

 - Fix build breakage for systems where 'sed' is not installed in /bin

 - Fix a false warning about missing MODULE_DESCRIPTION()

* tag 'kbuild-fixes-v6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  modpost: do not warn about missing MODULE_DESCRIPTION() for vmlinux.o
  kbuild: explicitly run mksysmap as sed script from link-vmlinux.sh
  kconfig: remove wrong expr_trans_bool()
  kconfig: doc: document behavior of 'select' and 'imply' followed by 'if'
  kconfig: doc: fix a typo in the note about 'imply'
  kconfig: gconf: give a proper initial state to the Save button
  kconfig: remove unneeded code for user-supplied values being out of range

Pull media fixes from Mauro Carvalho Chehab:

 - fixes for the new ipu6 driver (and related fixes to mei csi driver)

 - fix a double debugfs remove logic at mgb4 driver

 - a documentation fix

* tag 'media/v6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  media: intel/ipu6: add csi2 port sanity check in notifier bound
  media: intel/ipu6: update the maximum supported csi2 port number to 6
  media: mei: csi: Warn less verbosely of a missing device fwnode
  media: mei: csi: Put the IPU device reference
  media: intel/ipu6: fix the buffer flags caused by wrong parentheses
  media: intel/ipu6: Fix an error handling path in isys_probe()
  media: intel/ipu6: Move isys_remove() close to isys_probe()
  media: intel/ipu6: Fix some redundant resources freeing in ipu6_pci_remove()
  media: Documentation: v4l: Fix ACTIVE route flag
  media: mgb4: Fix double debugfs remove

Pull irq fixes from Ingo Molnar:

 - Fix possible memory leak the riscv-intc irqchip driver load failures

 - Fix boot crash in the sifive-plic irqchip driver caused by recently
   changed boot initialization order

 - Fix race condition in the gic-v3-its irqchip driver

* tag 'irq-urgent-2024-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/gic-v3-its: Fix potential race condition in its_vlpi_prop_update()
  irqchip/sifive-plic: Chain to parent IRQ after handlers are ready
  irqchip/riscv-intc: Prevent memory leak when riscv_intc_init_common() fails

Pull x86 fixes from Ingo Molnar:
 "Miscellaneous fixes:

   - Fix kexec() crash if call depth tracking is enabled

   - Fix SMN reads on inaccessible registers on certain AMD systems"

* tag 'x86-urgent-2024-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/amd_nb: Check for invalid SMN reads
  x86/kexec: Fix bug with call depth tracking

Pull perf event fix from Ingo Molnar:
 "Fix race between perf_event_free_task() and perf_event_release_kernel()
  that can result in missed wakeups and hung tasks"

* tag 'perf-urgent-2024-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/core: Fix missing wakeup when waiting for context reference

Pull locking doc fix from Ingo Molnar:
 "Fix typos in the kerneldoc of some of the atomic APIs"

* tag 'locking-urgent-2024-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/atomic: scripts: fix ${atomic}_sub_and_test() kerneldoc

Merge tag 'mm-hotfixes-stable-2024-06-07-15-24' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull misc fixes from Andrew Morton:
 "14 hotfixes, 6 of which are cc:stable.

  All except the nilfs2 fix affect MM and all are singletons - see the
  chagelogs for details"

* tag 'mm-hotfixes-stable-2024-06-07-15-24' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
  nilfs2: fix nilfs_empty_dir() misjudgment and long loop on I/O errors
  mm: fix xyz_noprof functions calling profiled functions
  codetag: avoid race at alloc_slab_obj_exts
  mm/hugetlb: do not call vma_add_reservation upon ENOMEM
  mm/ksm: fix ksm_zero_pages accounting
  mm/ksm: fix ksm_pages_scanned accounting
  kmsan: do not wipe out origin when doing partial unpoisoning
  vmalloc: check CONFIG_EXECMEM in is_vmalloc_or_module_addr()
  mm: page_alloc: fix highatomic typing in multi-block buddies
  nilfs2: fix potential kernel bug due to lack of writeback flag waiting
  memcg: remove the lockdep assert from __mod_objcg_mlstate()
  mm: arm64: fix the out-of-bounds issue in contpte_clear_young_dirty_ptes
  mm: huge_mm: fix undefined reference to `mthp_stats' for CONFIG_SYSFS=n
  mm: drop the 'anon_' prefix for swap-out mTHP counters

Pull gpio fixes from Bartosz Golaszewski:

 - interrupt handling and Kconfig fixes for gpio-tqmx86

 - add a buffer for storing output values in gpio-tqmx86 as reading back
   the registers always returns the input values

 - add missing MODULE_DESCRIPTION()s to several GPIO drivers

* tag 'gpio-fixes-for-v6.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  gpio: add missing MODULE_DESCRIPTION() macros
  gpio: tqmx86: fix broken IRQ_TYPE_EDGE_BOTH interrupt type
  gpio: tqmx86: store IRQ trigger type and unmask status separately
  gpio: tqmx86: introduce shadow register for GPIO output value
  gpio: tqmx86: fix typo in Kconfig label

Pull block fixes from Jens Axboe:

 - Fix for null_blk block size validation (Andreas)

 - NVMe pull request via Keith:
      - Use reserved tags for special fabrics operations (Chunguang)
      - Persistent Reservation status masking fix (Weiwen)

* tag 'block-6.10-20240607' of git://git.kernel.dk/linux:
  null_blk: fix validation of block size
  nvme: fix nvme_pr_* status code parsing
  nvme-fabrics: use reserved tag for reg read/write command

Pull io_uring fixes from Jens Axboe:

 - Fix a locking order issue with setting max async thread workers
   (Hagar)

 - Fix for a NULL pointer dereference for failed async flagged requests
   using ring provided buffers. This doesn't affect the current kernel,
   but it does affect older kernels, and is being queued up for 6.10
   just to make the stable process easier (me)

 - Fix for NAPI timeout calculations for how long to busy poll, and
   subsequently how much to sleep post that if a wait timeout is passed
   in (me)

 - Fix for a regression in this release cycle, where we could end up
   using a partially unitialized match value for io-wq (Su)

* tag 'io_uring-6.10-20240607' of git://git.kernel.dk/linux:
  io_uring: fix possible deadlock in io_register_iowq_max_workers()
  io_uring/io-wq: avoid garbage value of 'match' in io_wq_enqueue()
  io_uring/napi: fix timeout calculation
  io_uring: check for non-NULL file pointer in io_file_can_poll()

Pull btrfs fixes from David Sterba:

 - fix handling of folio private changes.

   The private value holds pointer to our extent buffer structure
   representing a metadata range. Release and create of the range was
   not properly synchronized when updating the private bit which ended
   up in double folio_put, leading to all sorts of breakage

 - fix a crash, reported as duplicate key in metadata, but caused by a
   race of fsync and size extending write. Requires prealloc target
   range + fsync and other conditions (log tree state, timing)

 - fix leak of qgroup extent records after transaction abort

* tag 'for-6.10-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: protect folio::private when attaching extent buffer folios
  btrfs: fix leak of qgroup extent records after transaction abort
  btrfs: fix crash on racing fsync and size-extending write into prealloc

Pull nfsd fix from Chuck Lever:

 - Fix an occasional memory overwrite caused by a fix added in 6.10

* tag 'nfsd-6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
  SUNRPC: Fix loop termination condition in gss_free_in_token_pages()

Pull RISC-V fixes from Palmer Dabbelt:

 - Another fix to avoid allocating pages that overlap with ERR_PTR,
   which manifests on rv32

 - A revert for the badaccess patch I incorrectly picked up an early
   version of

* tag 'riscv-for-linus-6.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  Revert "riscv: mm: accelerate pagefault when badaccess"
  riscv: fix overlap of allocated page and PTR_ERR

Pull s390 fixes from Alexander Gordeev:

 - Do not create PT_LOAD program header for the kenel image when the
   virtual memory informaton in OS_INFO data is not available. That
   fixes stand-alone dump failures against kernels that do not provide
   the virtual memory informaton

 - Add KVM s390 shared zeropage selftest

* tag 's390-6.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  KVM: s390x: selftests: Add shared zeropage test
  s390/crash: Do not use VM info if os_info does not have it

Pull arm64 fixes from Will Deacon:

 - Fix spurious CPU hotplug warning message from SETEND emulation code

 - Fix the build when GCC wasn't inlining our I/O accessor internals

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64/io: add constant-argument check
  arm64: armv8_deprecated: Fix warning in isndep cpuhp starting process

Merge tag 'platform-drivers-x86-v6.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform driver fixes from Hans de Goede:

 -  Default silead touchscreen driver to 10 fingers and drop 10 finger
    setting from all DMI quirks. More of a cleanup then a pure fix, but
    since the DMI quirks always get updated through the fixes branch
    this avoids conflicts.

 -  Kconfig fix for randconfig builds

 -  dell-smbios: Fix wrong token data in sysfs

 -  amd-hsmp: Fix driver poking unsupported hw when loaded manually

* tag 'platform-drivers-x86-v6.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
  platform/x86/amd/hsmp: Check HSMP support on AMD family of processors
  platform/x86: dell-smbios: Simplify error handling
  platform/x86: dell-smbios: Fix wrong token data in sysfs
  platform/x86: yt2-1380: add CONFIG_EXTCON dependency
  platform/x86: touchscreen_dmi: Use 2-argument strscpy()
  platform/x86: touchscreen_dmi: Drop "silead,max-fingers" property
  Input: silead - Always support 10 fingers