Pull MMC and MEMSTICK updates from Ulf Hansson:
 "MMC core:
   - Update maintainer and URL for the mmc-utils
   - Set default label for slot-gpio in case of no con-id
   - Convert MMC card DT bindings to a schema
   - Add optional host specific tuning support for eMMC HS400
   - Add error handling of add_disk()

  MMC host:
   - mtk-sd: Add host specific tuning support for eMMC HS400
   - mtk-sd: Make DMA handling more robust
   - dw_mmc: Prevent hangs for some data writes
   - dw_mmc: Move away from using the ->init_card() callback
   - mxs-mmc: Manage the regulator in the error path and in ->remove()
   - sdhci-cadence: Add support for the Microchip MPFS variant
   - sdhci-esdhc-imx: Add support for the NXP S32G2 variant
   - sdhci-of-arasan: Add support for the Intel Thunder Bay variant
   - sdhci-omap: Prepare to support more SoCs
   - sdhci-omap: Add support for omap3 and omap4 variants
   - sdhci-omap: Add support for power management
   - sdhci-omap: Add support for system wakeups
   - sdhci-msm: Add support for the msm8226 variant
   - sdhci-sprd: Verify that the DLL locks according to spec

  MEMSTICK:
   - Add error handling of add_disk()
   - A couple of small fixes and improvements"

* tag 'mmc-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (60 commits)
  docs: mmc: update maintainer name and URL
  mmc: dw_mmc: exynos: Fix spelling mistake "candiates" -> candidates
  MAINTAINERS: drop obsolete file pattern in SDHCI DRIVER section
  mmc: sdhci-esdhc-imx: add NXP S32G2 support
  dt-bindings: mmc: fsl-imx-esdhc: add NXP S32G2 support
  mmc: dw_mmc: Drop use of ->init_card() callback
  mmc: sdhci-omap: Fix build if CONFIG_PM_SLEEP is not set
  mmc: sdhci-omap: Remove forward declaration of sdhci_omap_context_save()
  memstick: r592: Fix a UAF bug when removing the driver
  mmc: mxs-mmc: disable regulator on error and in the remove function
  mmc: sdhci-omap: Configure optional wakeirq
  mmc: sdhci-omap: Allow SDIO card power off and enable aggressive PM
  mmc: sdhci-omap: Implement PM runtime functions
  mmc: sdhci-omap: Add omap_offset to support omap3 and earlier
  mmc: sdhci-omap: Handle voltages to add support omap4
  dt-bindings: sdhci-omap: Update binding for legacy SoCs
  mmc: sdhci-pci: Remove dead code (rst_n_gpio et al)
  mmc: sdhci-pci: Remove dead code (cd_gpio, cd_irq et al)
  mmc: sdhci-pci: Remove dead code (struct sdhci_pci_data et al)
  mmc: sdhci: Remove unused prototype declaration in the header
  ...

Pull IPMI driver updates from Corey Minyard:
 "A new type of low-level IPMI driver is added for direct communication
  over the IPMI message bus without a BMC between the driver and the
  bus.

  Other than that, lots of little bug fixes and enhancements"

* tag 'for-linus-5.16-1' of https://github.com/cminyard/linux-ipmi:
  ipmi: kcs_bmc: Fix a memory leak in the error handling path of 'kcs_bmc_serio_add_device()'
  char: ipmi: replace snprintf in show functions with sysfs_emit
  ipmi: ipmb: fix dependencies to eliminate build error
  ipmi:ipmb: Add OF support
  ipmi: bt: Add ast2600 compatible string
  ipmi: bt-bmc: Use registers directly
  ipmi: ipmb: Fix off-by-one size check on rcvlen
  ipmi:ssif: Use depends on, not select, for I2C
  ipmi: Add docs for the IPMI IPMB driver
  ipmi: Add docs for IPMB direct addressing
  ipmi:ipmb: Add initial support for IPMI over IPMB
  ipmi: Add support for IPMB direct messages
  ipmi: Export ipmb_checksum()
  ipmi: Fix a typo
  ipmi: Check error code before processing BMC response
  ipmi:devintf: Return a proper error when recv buffer too small
  ipmi: Disable some operations during a panic
  ipmi:watchdog: Set panic count to proper value on a panic

Pull LED updates from Pavel Machek:
 "Johannes pointed out that locking is still problematic with triggers
  list, attempt to solve that by using RCU"

* tag 'leds-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds:
  leds: trigger: Disable CPU trigger on PREEMPT_RT
  leds: trigger: use RCU to protect the led_cdevs list
  led-class-flash: fix -Wrestrict warning

Pull media updates from Mauro Carvalho Chehab:

 - New driver for SK Hynix Hi-846 8M pixel camera

 - New driver for the ov13b10 camera

 - New driver for Renesas R-Car ISP

 - mtk-vcodec gained support for version 2 of decoder firmware ABI

 - The legacy sir_ir driver got removed

 - videobuf2: the vb2_mem_ops kAPI had some improvements

 - lots of cleanups, fixes and new features at device drivers

* tag 'media/v5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (328 commits)
  media: venus: core: Add sdm660 DT compatible and resource struct
  media: dt-bindings: media: venus: Add sdm660 dt schema
  media: venus: vdec: decoded picture buffer handling during reconfig sequence
  media: venus: Handle fatal errors during encoding and decoding
  media: venus: helpers: Add helper to mark fatal vb2 error
  media: venus: hfi: Check for sys error on session hfi functions
  media: venus: Make sys_error flag an atomic bitops
  media: venus: venc: Use pmruntime autosuspend
  media: allegro: write vui parameters for HEVC
  media: allegro: nal-hevc: implement generator for vui
  media: allegro: write correct colorspace into SPS
  media: allegro: extract nal value lookup functions to header
  media: allegro: correctly scale the bit rate in SPS
  media: allegro: remove external QP table
  media: allegro: fix row and column in response message
  media: allegro: add control to disable encoder buffer
  media: allegro: add encoder buffer support
  media: allegro: add pm_runtime support
  media: allegro: lookup VCU settings
  media: allegro: fix module removal if initialization failed
  ...

Pull smack updates from Casey Schaufler:
 "Multiple corrections to smackfs:

   - a change for overlayfs support that corrects the initial attributes
     on created files

   - code clean-up for netlabel processing

   - several fixes in smackfs for a variety of reasons

   - Errors reported by W=1 have been addressed

  All told, nothing challenging"

* tag 'Smack-for-5.16' of https://github.com/cschaufler/smack-next:
  smackfs: use netlbl_cfg_cipsov4_del() for deleting cipso_v4_doi
  smackfs: use __GFP_NOFAIL for smk_cipso_doi()
  Smack: fix W=1 build warnings
  smack: remove duplicated hook function
  Smack:- Use overlay inode label in smack_inode_copy_up()
  smack: Guard smack_ipv6_lock definition within a SMACK_IPV6_PORT_LABELING block
  smackfs: Fix use-after-free in netlbl_catmap_walk()

Merge tag 'fallthrough-fixes-clang-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux

Pull fallthrough fixes from Gustavo A. R. Silva:
 "Fix some fall-through warnings when building with Clang and
  -Wimplicit-fallthrough"

* tag 'fallthrough-fixes-clang-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux:
  pcmcia: db1xxx_ss: Fix fall-through warning for Clang
  MIPS: Fix fall-through warnings for Clang
  scsi: st: Fix fall-through warning for Clang

Merge tag 'kspp-misc-fixes-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux

Pull hardening fixes and cleanups from Gustavo A. R. Silva:
 "Various hardening fixes and cleanups that I've been collecting during
  the last development cycle:

  Fix -Wcast-function-type error:

   - firewire: Remove function callback casts (Oscar Carter)

  Fix application of sizeof operator:

   - firmware/psci: fix application of sizeof to pointer (jing yangyang)

  Replace open coded instances with size_t saturating arithmetic
  helpers:

   - assoc_array: Avoid open coded arithmetic in allocator arguments
     (Len Baker)

   - writeback: prefer struct_size over open coded arithmetic (Len
     Baker)

   - aio: Prefer struct_size over open coded arithmetic (Len Baker)

   - dmaengine: pxa_dma: Prefer struct_size over open coded arithmetic
     (Len Baker)

  Flexible array transformation:

   - KVM: PPC: Replace zero-length array with flexible array member (Len
     Baker)

  Use 2-factor argument multiplication form:

   - nouveau/svm: Use kvcalloc() instead of kvzalloc() (Gustavo A. R.
     Silva)

   - xfs: Use kvcalloc() instead of kvzalloc() (Gustavo A. R. Silva)"

* tag 'kspp-misc-fixes-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux:
  firewire: Remove function callback casts
  nouveau/svm: Use kvcalloc() instead of kvzalloc()
  firmware/psci: fix application of sizeof to pointer
  dmaengine: pxa_dma: Prefer struct_size over open coded arithmetic
  KVM: PPC: Replace zero-length array with flexible array member
  aio: Prefer struct_size over open coded arithmetic
  writeback: prefer struct_size over open coded arithmetic
  xfs: Use kvcalloc() instead of kvzalloc()
  assoc_array: Avoid open coded arithmetic in allocator arguments

Pull seccomp updates from Kees Cook:
 "These are x86-specific, but I carried these since they're also
  seccomp-specific.

  This flips the defaults for spec_store_bypass_disable and
  spectre_v2_user from "seccomp" to "prctl", as enough time has passed
  to allow system owners to have updated the defensive stances of their
  various workloads, and it's long overdue to unpessimize seccomp
  threads.

  Extensive rationale and details are in Andrea's main patch.

  Summary:

   - set spec_store_bypass_disable & spectre_v2_user to prctl (Andrea Arcangeli)"

* tag 'seccomp-v5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  x86: deduplicate the spectre_v2_user documentation
  x86: change default to spec_store_bypass_disable=prctl spectre_v2_user=prctl

Pull overflow updates from Kees Cook:
 "The end goal of the current buffer overflow detection work[0] is to
  gain full compile-time and run-time coverage of all detectable buffer
  overflows seen via array indexing or memcpy(), memmove(), and
  memset(). The str*() family of functions already have full coverage.

  While much of the work for these changes have been on-going for many
  releases (i.e. 0-element and 1-element array replacements, as well as
  avoiding false positives and fixing discovered overflows[1]), this
  series contains the foundational elements of several related buffer
  overflow detection improvements by providing new common helpers and
  FORTIFY_SOURCE changes needed to gain the introspection required for
  compiler visibility into array sizes. Also included are a handful of
  already Acked instances using the helpers (or related clean-ups), with
  many more waiting at the ready to be taken via subsystem-specific
  trees[2].

  The new helpers are:

   - struct_group() for gaining struct member range introspection

   - memset_after() and memset_startat() for clearing to the end of
     structures

   - DECLARE_FLEX_ARRAY() for using flex arrays in unions or alone in
     structs

  Also included is the beginning of the refactoring of FORTIFY_SOURCE to
  support memcpy() introspection, fix missing and regressed coverage
  under GCC, and to prepare to fix the currently broken Clang support.
  Finishing this work is part of the larger series[0], but depends on
  all the false positives and buffer overflow bug fixes to have landed
  already and those that depend on this series to land.

  As part of the FORTIFY_SOURCE refactoring, a set of both a
  compile-time and run-time tests are added for FORTIFY_SOURCE and the
  mem*()-family functions respectively. The compile time tests have
  found a legitimate (though corner-case) bug[6] already.

  Please note that the appearance of "panic" and "BUG" in the
  FORTIFY_SOURCE refactoring are the result of relocating existing code,
  and no new use of those code-paths are expected nor desired.

  Finally, there are two tree-wide conversions for 0-element arrays and
  flexible array unions to gain sane compiler introspection coverage
  that result in no known object code differences.

  After this series (and the changes that have now landed via netdev and
  usb), we are very close to finally being able to build with
  -Warray-bounds and -Wzero-length-bounds.

  However, due corner cases in GCC[3] and Clang[4], I have not included
  the last two patches that turn on these options, as I don't want to
  introduce any known warnings to the build. Hopefully these can be
  solved soon"

Link: https://lore.kernel.org/lkml/20210818060533.3569517-1-keescook@chromium.org/ [0]
Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/log/?qt=grep&q=FORTIFY_SOURCE [1]
Link: https://lore.kernel.org/lkml/202108220107.3E26FE6C9C@keescook/ [2]
Link: https://lore.kernel.org/lkml/3ab153ec-2798-da4c-f7b1-81b0ac8b0c5b@roeck-us.net/ [3]
Link: https://bugs.llvm.org/show_bug.cgi?id=51682 [4]
Link: https://lore.kernel.org/lkml/202109051257.29B29745C0@keescook/ [5]
Link: https://lore.kernel.org/lkml/20211020200039.170424-1-keescook@chromium.org/ [6]

* tag 'overflow-v5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (30 commits)
  fortify: strlen: Avoid shadowing previous locals
  compiler-gcc.h: Define __SANITIZE_ADDRESS__ under hwaddress sanitizer
  treewide: Replace 0-element memcpy() destinations with flexible arrays
  treewide: Replace open-coded flex arrays in unions
  stddef: Introduce DECLARE_FLEX_ARRAY() helper
  btrfs: Use memset_startat() to clear end of struct
  string.h: Introduce memset_startat() for wiping trailing members and padding
  xfrm: Use memset_after() to clear padding
  string.h: Introduce memset_after() for wiping trailing members/padding
  lib: Introduce CONFIG_MEMCPY_KUNIT_TEST
  fortify: Add compile-time FORTIFY_SOURCE tests
  fortify: Allow strlen() and strnlen() to pass compile-time known lengths
  fortify: Prepare to improve strnlen() and strlen() warnings
  fortify: Fix dropped strcpy() compile-time write overflow check
  fortify: Explicitly disable Clang support
  fortify: Move remaining fortify helpers into fortify-string.h
  lib/string: Move helper functions out of string.c
  compiler_types.h: Remove __compiletime_object_size()
  cm4000_cs: Use struct_group() to zero struct cm4000_dev region
  can: flexcan: Use struct_group() to zero struct flexcan_regs regions
  ...

Pull compiler hardening updates from Kees Cook:
 "These are various compiler-related hardening feature updates. Notable
  is the addition of an explicit limited rationale for, and deprecation
  schedule of, gcc-plugins.

  gcc-plugins:
   - remove support for GCC 4.9 and older (Ard Biesheuvel)
   - remove duplicate include in gcc-common.h (Ye Guojin)
   - Explicitly document purpose and deprecation schedule (Kees Cook)
   - Remove cyc_complexity (Kees Cook)

  instrumentation:
   - Avoid harmless Clang option under CONFIG_INIT_STACK_ALL_ZERO (Kees Cook)

  Clang LTO:
   - kallsyms: strip LTO suffixes from static functions (Nick Desaulniers)"

* tag 'hardening-v5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  gcc-plugins: remove duplicate include in gcc-common.h
  gcc-plugins: Remove cyc_complexity
  gcc-plugins: Explicitly document purpose and deprecation schedule
  kallsyms: strip LTO suffixes from static functions
  gcc-plugins: remove support for GCC 4.9 and older
  hardening: Avoid harmless Clang option under CONFIG_INIT_STACK_ALL_ZERO

Merge tag 'cpu-to-thread_info-v5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux

Pull thread_info update to move 'cpu' back from task_struct from Kees Cook:
 "Cross-architecture update to move task_struct::cpu back into
  thread_info on arm64, x86, s390, powerpc, and riscv. All Acked by arch
  maintainers.

  Quoting Ard Biesheuvel:

     'Move task_struct::cpu back into thread_info

      Keeping CPU in task_struct is problematic for architectures that
      define raw_smp_processor_id() in terms of this field, as it
      requires linux/sched.h to be included, which causes a lot of pain
      in terms of circular dependencies (aka 'header soup')

      This series moves it back into thread_info (where it came from)
      for all architectures that enable THREAD_INFO_IN_TASK, addressing
      the header soup issue as well as some pointless differences in the
      implementations of task_cpu() and set_task_cpu()'"

* tag 'cpu-to-thread_info-v5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  riscv: rely on core code to keep thread_info::cpu updated
  powerpc: smp: remove hack to obtain offset of task_struct::cpu
  sched: move CPU field back into thread_info if THREAD_INFO_IN_TASK=y
  powerpc: add CPU field to struct thread_info
  s390: add CPU field to struct thread_info
  x86: add CPU field to struct thread_info
  arm64: add CPU field to struct thread_info

Pull m68k updates from Geert Uytterhoeven:

 - A small comma vs semicolon cleanup

 - defconfig updates

* tag 'm68k-for-v5.16-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k: defconfig: Update defconfigs for v5.15-rc1
  m68k: muldi3: Use semicolon instead of comma

Pull parisc updates from Helge Deller:
 "Lots of new features and fixes:

   - Added TOC (table of content) support, which is a debugging feature
     which is either initiated by pressing the TOC button or via command
     in the BMC. If pressed the Linux built-in KDB/KGDB will be called
     (Sven Schnelle)

   - Fix CONFIG_PREEMPT (Sven)

   - Fix unwinder on 64-bit kernels (Sven)

   - Various kgdb fixes (Sven)

   - Added KFENCE support (me)

   - Switch to ARCH_STACKWALK implementation (me)

   - Fix ptrace check on syscall return (me)

   - Fix kernel crash with fixmaps on PA1.x machines (me)

   - Move thread_info into task struct, aka CONFIG_THREAD_INFO_IN_TASK
     (me)

   - Updated defconfigs

   - Smaller cleanups, including Makefile cleanups (Masahiro Yamada),
     use kthread_run() macro (Cai Huoqing), use swap() macro (Yihao
     Han)"

* tag 'for-5.16/parisc-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: (36 commits)
  parisc: Fix set_fixmap() on PA1.x CPUs
  parisc: Use swap() to swap values in setup_bootmem()
  parisc: Update defconfigs
  parisc: decompressor: clean up Makefile
  parisc: decompressor: remove repeated depenency of misc.o
  parisc: Remove unused constants from asm-offsets.c
  parisc/ftrace: use static key to enable/disable function graph tracer
  parisc/ftrace: set function trace function
  parisc: Make use of the helper macro kthread_run()
  parisc: mark xchg functions notrace
  parisc: enhance warning regarding usage of O_NONBLOCK
  parisc: Drop ifdef __KERNEL__ from non-uapi kernel headers
  parisc: Use PRIV_USER and PRIV_KERNEL in ptrace.h
  parisc: Use PRIV_USER in syscall.S
  parisc/kgdb: add kgdb_roundup() to make kgdb work with idle polling
  parisc: Move thread_info into task struct
  parisc: add support for TOC (transfer of control)
  parisc/firmware: add functions to retrieve TOC data
  parisc: add PIM TOC data structures
  parisc: move virt_map macro to assembly.h
  ...

Pull arm64 updates from Will Deacon:
 "There's the usual summary below, but the highlights are support for
  the Armv8.6 timer extensions, KASAN support for asymmetric MTE, the
  ability to kexec() with the MMU enabled and a second attempt at
  switching to the generic pfn_valid() implementation.

  Summary:

   - Support for the Arm8.6 timer extensions, including a
     self-synchronising view of the system registers to elide some
     expensive ISB instructions.

   - Exception table cleanup and rework so that the fixup handlers
     appear correctly in backtraces.

   - A handful of miscellaneous changes, the main one being selection of
     CONFIG_HAVE_POSIX_CPU_TIMERS_TASK_WORK.

   - More mm and pgtable cleanups.

   - KASAN support for "asymmetric" MTE, where tag faults are reported
     synchronously for loads (via an exception) and asynchronously for
     stores (via a register).

   - Support for leaving the MMU enabled during kexec relocation, which
     significantly speeds up the operation.

   - Minor improvements to our perf PMU drivers.

   - Improvements to the compat vDSO build system, particularly when
     building with LLVM=1.

   - Preparatory work for handling some Coresight TRBE tracing errata.

   - Cleanup and refactoring of the SVE code to pave the way for SME
     support in future.

   - Ensure SCS pages are unpoisoned immediately prior to freeing them
     when KASAN is enabled for the vmalloc area.

   - Try moving to the generic pfn_valid() implementation again now that
     the DMA mapping issue from last time has been resolved.

   - Numerous improvements and additions to our FPSIMD and SVE
     selftests"

[ armv8.6 timer updates were in a shared branch and already came in
  through -tip in the timer pull  - Linus ]

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (85 commits)
  arm64: Select POSIX_CPU_TIMERS_TASK_WORK
  arm64: Document boot requirements for FEAT_SME_FA64
  arm64/sve: Fix warnings when SVE is disabled
  arm64/sve: Add stub for sve_max_virtualisable_vl()
  arm64: errata: Add detection for TRBE write to out-of-range
  arm64: errata: Add workaround for TSB flush failures
  arm64: errata: Add detection for TRBE overwrite in FILL mode
  arm64: Add Neoverse-N2, Cortex-A710 CPU part definition
  selftests: arm64: Factor out utility functions for assembly FP tests
  arm64: vmlinux.lds.S: remove `.fixup` section
  arm64: extable: add load_unaligned_zeropad() handler
  arm64: extable: add a dedicated uaccess handler
  arm64: extable: add `type` and `data` fields
  arm64: extable: use `ex` for `exception_table_entry`
  arm64: extable: make fixup_exception() return bool
  arm64: extable: consolidate definitions
  arm64: gpr-num: support W registers
  arm64: factor out GPR numbering helpers
  arm64: kvm: use kvm_exception_table_entry
  arm64: lib: __arch_copy_to_user(): fold fixups into body
  ...

Pull x86 SGX updates from Borislav Petkov:
 "Add a SGX_IOC_VEPC_REMOVE ioctl to the /dev/sgx_vepc virt interface
  with which EPC pages can be put back into their uninitialized state
  without having to reopen /dev/sgx_vepc, which could not be possible
  anymore after startup due to security policies"

* tag 'x86_sgx_for_v5.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/sgx/virt: implement SGX_IOC_VEPC_REMOVE ioctl
  x86/sgx/virt: extract sgx_vepc_remove_page

Pull x86 SEV updates from Borislav Petkov:

 - Export sev_es_ghcb_hv_call() so that HyperV Isolation VMs can use it
   too

 - Non-urgent fixes and cleanups

* tag 'x86_sev_for_v5.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/sev: Expose sev_es_ghcb_hv_call() for use by HyperV
  x86/sev: Allow #VC exceptions on the VC2 stack
  x86/sev: Fix stack type check in vc_switch_off_ist()
  x86/sme: Use #define USE_EARLY_PGTABLE_L5 in mem_encrypt_identity.c
  x86/sev: Carve out HV call's return value verification

Pull misc x86 changes from Borislav Petkov:

 - Use the proper interface for the job: get_unaligned() instead of
   memcpy() in the insn decoder

 - A randconfig build fix

* tag 'x86_misc_for_v5.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/insn: Use get_unaligned() instead of memcpy()
  x86/Kconfig: Fix an unused variable error in dell-smm-hwmon

Pull x86 cpu updates from Borislav Petkov:

 - Start checking a CPUID bit on AMD Zen3 which states that the CPU
   clears the segment base when a null selector is written. Do the
   explicit detection on older CPUs, zen2 and hygon specifically, which
   have the functionality but do not advertize the CPUID bit. Factor in
   the presence of a hypervisor underneath the kernel and avoid doing
   the explicit check there which the HV might've decided to not
   advertize for migration safety reasons, or similar.

 - Add support for a new X86 CPU vendor: VORTEX. Needed for whitelisting
   those CPUs in the hardware vulnerabilities detection

 - Force the compiler to use rIP-relative addressing in the fallback
   path of static_cpu_has(), in order to avoid unnecessary register
   pressure

* tag 'x86_cpu_for_v5.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/cpu: Fix migration safety with X86_BUG_NULL_SEL
  x86/CPU: Add support for Vortex CPUs
  x86/umip: Downgrade warning messages to debug loglevel
  x86/asm: Avoid adding register pressure for the init case in static_cpu_has()
  x86/asm: Add _ASM_RIP() macro for x86-64 (%rip) suffix

Pull x86 cleanups from Borislav Petkov:
 "The usual round of random minor fixes and cleanups all over the place"

* tag 'x86_cleanups_for_v5.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/Makefile: Remove unneeded whitespaces before tabs
  x86/of: Kill unused early_init_dt_scan_chosen_arch()
  x86: Fix misspelled Kconfig symbols
  x86/Kconfig: Remove references to obsolete Kconfig symbols
  x86/smp: Remove unnecessary assignment to local var freq_scale

Pull generic confidential computing updates from Borislav Petkov:
 "Add an interface called cc_platform_has() which is supposed to be used
  by confidential computing solutions to query different aspects of the
  system.

  The intent behind it is to unify testing of such aspects instead of
  having each confidential computing solution add its own set of tests
  to code paths in the kernel, leading to an unwieldy mess"

* tag 'x86_cc_for_v5.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  treewide: Replace the use of mem_encrypt_active() with cc_platform_has()
  x86/sev: Replace occurrences of sev_es_active() with cc_platform_has()
  x86/sev: Replace occurrences of sev_active() with cc_platform_has()
  x86/sme: Replace occurrences of sme_active() with cc_platform_has()
  powerpc/pseries/svm: Add a powerpc version of cc_platform_has()
  x86/sev: Add an x86 version of cc_platform_has()
  arch/cc: Introduce a function to check for confidential computing features
  x86/ioremap: Selectively build arch override encryption functions

Pull x86 build fix from Borislav Petkov:

 - A single fix to hdimage when using older versions of mtools

* tag 'x86_build_for_v5.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/boot: Fix make hdimage with older versions of mtools

Pull RAS updates from Borislav Petkov:

 - Get rid of a bunch of function pointers used in MCA land in favor of
   normal functions. This is in preparation of making the MCA code
   noinstr-aware

 - When the kernel copies data from user addresses and it encounters a
   machine check, a SIGBUS is sent to that process. Change this action
   to either an -EFAULT which is returned to the user or a short write,
   making the recovery action a lot more user-friendly

* tag 'ras_core_for_v5.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mce: Sort mca_config members to get rid of unnecessary padding
  x86/mce: Get rid of the ->quirk_no_way_out() indirect call
  x86/mce: Get rid of msr_ops
  x86/mce: Get rid of machine_check_vector
  x86/mce: Get rid of the mce_severity function pointer
  x86/mce: Drop copyin special case for #MC
  x86/mce: Change to not send SIGBUS error during copy from user

Pull EFI updates from Borislav Petkov:
 "The last EFI pull request which is forwarded through the tip tree, for
  v5.16. From now on, Ard will be sending stuff directly.

  Disable EFI runtime services by default on PREEMPT_RT, while adding
  the ability to re-enable them on demand by passing efi=runtime on the
  command line"

* tag 'efi-next-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  efi: Allow efi=runtime
  efi: Disable runtime services on RT

Pull EDAC updates from Borislav Petkov:
 "A small pile of EDAC updates which the autumn wind blew my way. :)

   - amd64_edac: Add support for three-rank interleaving mode which is
     present on AMD zen2 servers

   - The usual fixes and cleanups all over EDAC land"

* tag 'edac_updates_for_v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
  EDAC/sb_edac: Fix top-of-high-memory value for Broadwell/Haswell
  EDAC/ti: Remove redundant error messages
  EDAC/amd64: Handle three rank interleaving mode
  EDAC/mc_sysfs: Print MC-scope sysfs counters unsigned
  EDAC/al_mc: Make use of the helper function devm_add_action_or_reset()
  EDAC/mc: Replace strcpy(), sprintf() and snprintf() with strscpy() or scnprintf()

I had missed a semantic conflict between commit d389a4a8 ("mm: Add
folio flag manipulation functions") from the folio tree, and commit
eac96c3e ("mm: filemap: check if THP has hwpoisoned subpage for PMD
page fault") that added a new set of page flags.

My build tests had too many options enabled, which hid this issue.  But
if you didn't have MEMORY_FAILURE or TRANSPARENT_HUGEPAGE enabled, you'd
end up with build errors like this:

  include/linux/page-flags.h:806:29: error: macro "PAGEFLAG_FALSE" requires 2 arguments, but only 1 given
    806 | PAGEFLAG_FALSE(HasHWPoisoned)
        |                             ^

due to the missing lowercase name used for folio function naming.

Fixes: 49f8275c ("Merge tag 'folio-5.16' of git://git.infradead.org/users/willy/pagecache")
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Reported-by: Yang Shi <shy828301@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull x86 fpu updates from Thomas Gleixner:

 - Cleanup of extable fixup handling to be more robust, which in turn
   allows to make the FPU exception fixups more robust as well.

 - Change the return code for signal frame related failures from
   explicit error codes to a boolean fail/success as that's all what the
   calling code evaluates.

 - A large refactoring of the FPU code to prepare for adding AMX
   support:

      - Distangle the public header maze and remove especially the
        misnomed kitchen sink internal.h which is despite it's name
        included all over the place.

      - Add a proper abstraction for the register buffer storage (struct
        fpstate) which allows to dynamically size the buffer at runtime
        by flipping the pointer to the buffer container from the default
        container which is embedded in task_struct::tread::fpu to a
        dynamically allocated container with a larger register buffer.

      - Convert the code over to the new fpstate mechanism.

      - Consolidate the KVM FPU handling by moving the FPU related code
        into the FPU core which removes the number of exports and avoids
        adding even more export when AMX has to be supported in KVM.
        This also removes duplicated code which was of course
        unnecessary different and incomplete in the KVM copy.

      - Simplify the KVM FPU buffer handling by utilizing the new
        fpstate container and just switching the buffer pointer from the
        user space buffer to the KVM guest buffer when entering
        vcpu_run() and flipping it back when leaving the function. This
        cuts the memory requirements of a vCPU for FPU buffers in half
        and avoids pointless memory copy operations.

        This also solves the so far unresolved problem of adding AMX
        support because the current FPU buffer handling of KVM inflicted
        a circular dependency between adding AMX support to the core and
        to KVM. With the new scheme of switching fpstate AMX support can
        be added to the core code without affecting KVM.

      - Replace various variables with proper data structures so the
        extra information required for adding dynamically enabled FPU
        features (AMX) can be added in one place

 - Add AMX (Advanced Matrix eXtensions) support (finally):

   AMX is a large XSTATE component which is going to be available with
   Saphire Rapids XEON CPUs. The feature comes with an extra MSR
   (MSR_XFD) which allows to trap the (first) use of an AMX related
   instruction, which has two benefits:

    1) It allows the kernel to control access to the feature

    2) It allows the kernel to dynamically allocate the large register
       state buffer instead of burdening every task with the the extra
       8K or larger state storage.

   It would have been great to gain this kind of control already with
   AVX512.

   The support comes with the following infrastructure components:

    1) arch_prctl() to
        - read the supported features (equivalent to XGETBV(0))
        - read the permitted features for a task
        - request permission for a dynamically enabled feature

       Permission is granted per process, inherited on fork() and
       cleared on exec(). The permission policy of the kernel is
       restricted to sigaltstack size validation, but the syscall
       obviously allows further restrictions via seccomp etc.

    2) A stronger sigaltstack size validation for sys_sigaltstack(2)
       which takes granted permissions and the potentially resulting
       larger signal frame into account. This mechanism can also be used
       to enforce factual sigaltstack validation independent of dynamic
       features to help with finding potential victims of the 2K
       sigaltstack size constant which is broken since AVX512 support
       was added.

    3) Exception handling for #NM traps to catch first use of a extended
       feature via a new cause MSR. If the exception was caused by the
       use of such a feature, the handler checks permission for that
       feature. If permission has not been granted, the handler sends a
       SIGILL like the #UD handler would do if the feature would have
       been disabled in XCR0. If permission has been granted, then a new
       fpstate which fits the larger buffer requirement is allocated.

       In the unlikely case that this allocation fails, the handler
       sends SIGSEGV to the task. That's not elegant, but unavoidable as
       the other discussed options of preallocation or full per task
       permissions come with their own set of horrors for kernel and/or
       userspace. So this is the lesser of the evils and SIGSEGV caused
       by unexpected memory allocation failures is not a fundamentally
       new concept either.

       When allocation succeeds, the fpstate properties are filled in to
       reflect the extended feature set and the resulting sizes, the
       fpu::fpstate pointer is updated accordingly and the trap is
       disarmed for this task permanently.

    4) Enumeration and size calculations

    5) Trap switching via MSR_XFD

       The XFD (eXtended Feature Disable) MSR is context switched with
       the same life time rules as the FPU register state itself. The
       mechanism is keyed off with a static key which is default
       disabled so !AMX equipped CPUs have zero overhead. On AMX enabled
       CPUs the overhead is limited by comparing the tasks XFD value
       with a per CPU shadow variable to avoid redundant MSR writes. In
       case of switching from a AMX using task to a non AMX using task
       or vice versa, the extra MSR write is obviously inevitable.

       All other places which need to be aware of the variable feature
       sets and resulting variable sizes are not affected at all because
       they retrieve the information (feature set, sizes) unconditonally
       from the fpstate properties.

    6) Enable the new AMX states

   Note, this is relatively new code despite the fact that AMX support
   is in the works for more than a year now.

   The big refactoring of the FPU code, which allowed to do a proper
   integration has been started exactly 3 weeks ago. Refactoring of the
   existing FPU code and of the original AMX patches took a week and has
   been subject to extensive review and testing. The only fallout which
   has not been caught in review and testing right away was restricted
   to AMX enabled systems, which is completely irrelevant for anyone
   outside Intel and their early access program. There might be dragons
   lurking as usual, but so far the fine grained refactoring has held up
   and eventual yet undetected fallout is bisectable and should be
   easily addressable before the 5.16 release. Famous last words...

   Many thanks to Chang Bae and Dave Hansen for working hard on this and
   also to the various test teams at Intel who reserved extra capacity
   to follow the rapid development of this closely which provides the
   confidence level required to offer this rather large update for
   inclusion into 5.16-rc1

* tag 'x86-fpu-2021-11-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (110 commits)
  Documentation/x86: Add documentation for using dynamic XSTATE features
  x86/fpu: Include vmalloc.h for vzalloc()
  selftests/x86/amx: Add context switch test
  selftests/x86/amx: Add test cases for AMX state management
  x86/fpu/amx: Enable the AMX feature in 64-bit mode
  x86/fpu: Add XFD handling for dynamic states
  x86/fpu: Calculate the default sizes independently
  x86/fpu/amx: Define AMX state components and have it used for boot-time checks
  x86/fpu/xstate: Prepare XSAVE feature table for gaps in state component numbers
  x86/fpu/xstate: Add fpstate_realloc()/free()
  x86/fpu/xstate: Add XFD #NM handler
  x86/fpu: Update XFD state where required
  x86/fpu: Add sanity checks for XFD
  x86/fpu: Add XFD state to fpstate
  x86/msr-index: Add MSRs for XFD
  x86/cpufeatures: Add eXtended Feature Disabling (XFD) feature bit
  x86/fpu: Reset permission and fpstate on exec()
  x86/fpu: Prepare fpu_clone() for dynamically enabled features
  x86/fpu/signal: Prepare for variable sigframe length
  x86/signal: Use fpu::__state_user_size for sigalt stack validation
  ...

Pull x86/apic update from Thomas Gleixner:
 "A single commit which reduces cache misses in __x2apic_send_IPI_mask()
  significantly by converting x86_cpu_to_logical_apicid() to an array
  instead of using per CPU storage.

  This reduces the cost for a full broadcast on a dual socket system
  with 256 CPUs from 33 down to 11 microseconds"

* tag 'x86-apic-2021-11-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/apic: Reduce cache line misses in __x2apic_send_IPI_mask()

Pull scheduler updates from Thomas Gleixner:

 - Revert the printk format based wchan() symbol resolution as it can
   leak the raw value in case that the symbol is not resolvable.

 - Make wchan() more robust and work with all kind of unwinders by
   enforcing that the task stays blocked while unwinding is in progress.

 - Prevent sched_fork() from accessing an invalid sched_task_group

 - Improve asymmetric packing logic

 - Extend scheduler statistics to RT and DL scheduling classes and add
   statistics for bandwith burst to the SCHED_FAIR class.

 - Properly account SCHED_IDLE entities

 - Prevent a potential deadlock when initial priority is assigned to a
   newly created kthread. A recent change to plug a race between cpuset
   and __sched_setscheduler() introduced a new lock dependency which is
   now triggered. Break the lock dependency chain by moving the priority
   assignment to the thread function.

 - Fix the idle time reporting in /proc/uptime for NOHZ enabled systems.

 - Improve idle balancing in general and especially for NOHZ enabled
   systems.

 - Provide proper interfaces for live patching so it does not have to
   fiddle with scheduler internals.

 - Add cluster aware scheduling support.

 - A small set of tweaks for RT (irqwork, wait_task_inactive(), various
   scheduler options and delaying mmdrop)

 - The usual small tweaks and improvements all over the place

* tag 'sched-core-2021-11-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (69 commits)
  sched/fair: Cleanup newidle_balance
  sched/fair: Remove sysctl_sched_migration_cost condition
  sched/fair: Wait before decaying max_newidle_lb_cost
  sched/fair: Skip update_blocked_averages if we are defering load balance
  sched/fair: Account update_blocked_averages in newidle_balance cost
  x86: Fix __get_wchan() for !STACKTRACE
  sched,x86: Fix L2 cache mask
  sched/core: Remove rq_relock()
  sched: Improve wake_up_all_idle_cpus() take #2
  irq_work: Also rcuwait for !IRQ_WORK_HARD_IRQ on PREEMPT_RT
  irq_work: Handle some irq_work in a per-CPU thread on PREEMPT_RT
  irq_work: Allow irq_work_sync() to sleep if irq_work() no IRQ support.
  sched/rt: Annotate the RT balancing logic irqwork as IRQ_WORK_HARD_IRQ
  sched: Add cluster scheduler level for x86
  sched: Add cluster scheduler level in core and related Kconfig for ARM64
  topology: Represent clusters of CPUs within a die
  sched: Disable -Wunused-but-set-variable
  sched: Add wrapper for get_wchan() to keep task blocked
  x86: Fix get_wchan() to support the ORC unwinder
  proc: Use task_is_running() for wchan in /proc/$pid/stat
  ...

Pull timer updates from Thomas Gleixner:
 "Time, timers and timekeeping updates:

   - No core updates

   - No new clocksource/event driver

   - A large rework of the ARM architected timer driver to prepare for
     the support of the upcoming ARMv8.6 support

   - Fix Kconfig options for Exynos MCT, Samsung PWM and TI DM timers

   - Address a namespace collison in the ARC sp804 timer driver"

* tag 'timers-core-2021-10-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  clocksource/drivers/timer-ti-dm: Select TIMER_OF
  clocksource/drivers/exynosy: Depend on sub-architecture for Exynos MCT and Samsung PWM
  clocksource/drivers/arch_arm_timer: Move workaround synchronisation around
  clocksource/drivers/arm_arch_timer: Fix masking for high freq counters
  clocksource/drivers/arm_arch_timer: Drop unnecessary ISB on CVAL programming
  clocksource/drivers/arm_arch_timer: Remove any trace of the TVAL programming interface
  clocksource/drivers/arm_arch_timer: Work around broken CVAL implementations
  clocksource/drivers/arm_arch_timer: Advertise 56bit timer to the core code
  clocksource/drivers/arm_arch_timer: Move MMIO timer programming over to CVAL
  clocksource/drivers/arm_arch_timer: Fix MMIO base address vs callback ordering issue
  clocksource/drivers/arm_arch_timer: Move drop _tval from erratum function names
  clocksource/drivers/arm_arch_timer: Move system register timer programming over to CVAL
  clocksource/drivers/arm_arch_timer: Extend write side of timer register accessors to u64
  clocksource/drivers/arm_arch_timer: Drop CNT*_TVAL read accessors
  clocksource/arm_arch_timer: Add build-time guards for unhandled register accesses
  clocksource/drivers/arc_timer: Eliminate redefined macro error

Pull objtool updates from Thomas Gleixner:

 - Improve retpoline code patching by separating it from alternatives
   which reduces memory footprint and allows to do better optimizations
   in the actual runtime patching.

 - Add proper retpoline support for x86/BPF

 - Address noinstr warnings in x86/kvm, lockdep and paravirtualization
   code

 - Add support to handle pv_opsindirect calls in the noinstr analysis

 - Classify symbols upfront and cache the result to avoid redundant
   str*cmp() invocations.

 - Add a CFI hash to reduce memory consumption which also reduces
   runtime on a allyesconfig by ~50%

 - Adjust XEN code to make objtool handling more robust and as a side
   effect to prevent text fragmentation due to placement of the
   hypercall page.

* tag 'objtool-core-2021-10-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (41 commits)
  bpf,x86: Respect X86_FEATURE_RETPOLINE*
  bpf,x86: Simplify computing label offsets
  x86,bugs: Unconditionally allow spectre_v2=retpoline,amd
  x86/alternative: Add debug prints to apply_retpolines()
  x86/alternative: Try inline spectre_v2=retpoline,amd
  x86/alternative: Handle Jcc __x86_indirect_thunk_\reg
  x86/alternative: Implement .retpoline_sites support
  x86/retpoline: Create a retpoline thunk array
  x86/retpoline: Move the retpoline thunk declarations to nospec-branch.h
  x86/asm: Fixup odd GEN-for-each-reg.h usage
  x86/asm: Fix register order
  x86/retpoline: Remove unused replacement symbols
  objtool,x86: Replace alternatives with .retpoline_sites
  objtool: Shrink struct instruction
  objtool: Explicitly avoid self modifying code in .altinstr_replacement
  objtool: Classify symbols
  objtool: Support pv_opsindirect calls for noinstr
  x86/xen: Rework the xen_{cpu,irq,mmu}_opsarrays
  x86/xen: Mark xen_force_evtchn_callback() noinstr
  x86/xen: Make irq_disable() noinstr
  ...

Pull locking updates from Thomas Gleixner:

 - Move futex code into kernel/futex/ and split up the kitchen sink into
   seperate files to make integration of sys_futex_waitv() simpler.

 - Add a new sys_futex_waitv() syscall which allows to wait on multiple
   futexes.

   The main use case is emulating Windows' WaitForMultipleObjects which
   allows Wine to improve the performance of Windows Games. Also native
   Linux games can benefit from this interface as this is a common wait
   pattern for this kind of applications.

 - Add context to ww_mutex_trylock() to provide a path for i915 to
   rework their eviction code step by step without making lockdep upset
   until the final steps of rework are completed. It's also useful for
   regulator and TTM to avoid dropping locks in the non contended path.

 - Lockdep and might_sleep() cleanups and improvements

 - A few improvements for the RT substitutions.

 - The usual small improvements and cleanups.

* tag 'locking-core-2021-10-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (44 commits)
  locking: Remove spin_lock_flags() etc
  locking/rwsem: Fix comments about reader optimistic lock stealing conditions
  locking: Remove rcu_read_{,un}lock() for preempt_{dis,en}able()
  locking/rwsem: Disable preemption for spinning region
  docs: futex: Fix kernel-doc references
  futex: Fix PREEMPT_RT build
  futex2: Documentation: Document sys_futex_waitv() uAPI
  selftests: futex: Test sys_futex_waitv() wouldblock
  selftests: futex: Test sys_futex_waitv() timeout
  selftests: futex: Add sys_futex_waitv() test
  futex,arm: Wire up sys_futex_waitv()
  futex,x86: Wire up sys_futex_waitv()
  futex: Implement sys_futex_waitv()
  futex: Simplify double_lock_hb()
  futex: Split out wait/wake
  futex: Split out requeue
  futex: Rename mark_wake_futex()
  futex: Rename: match_futex()
  futex: Rename: hb_waiter_{inc,dec,pending}()
  futex: Split out PI futex
  ...

Pull perf updates from Thomas Gleixner:
 "Core:

   - Allow ftrace to instrument parts of the perf core code

   - Add a new mem_hops field to perf_mem_data_src which allows to
     represent intra-node/package or inter-node/off-package details to
     prepare for next generation systems which have more hieararchy
     within the node/pacakge level.

  Tools:

   - Update for the new mem_hops field in perf_mem_data_src

  Arch:

   - A set of constraints fixes for the Intel uncore PMU

   - The usual set of small fixes and improvements for x86 and PPC"

* tag 'perf-core-2021-10-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/intel: Fix ICL/SPR INST_RETIRED.PREC_DIST encodings
  powerpc/perf: Fix data source encodings for L2.1 and L3.1 accesses
  tools/perf: Add mem_hops field in perf_mem_data_src structure
  perf: Add mem_hops field in perf_mem_data_src structure
  perf: Add comment about current state of PERF_MEM_LVL_* namespace and remove an extra line
  perf/core: Allow ftrace for functions in kernel/event/core.c
  perf/x86: Add new event for AUX output counter index
  perf/x86: Add compiler barrier after updating BTS
  perf/x86/intel/uncore: Fix Intel SPR M3UPI event constraints
  perf/x86/intel/uncore: Fix Intel SPR M2PCIE event constraints
  perf/x86/intel/uncore: Fix Intel SPR IIO event constraints
  perf/x86/intel/uncore: Fix Intel SPR CHA event constraints
  perf/x86/intel/uncore: Fix Intel ICX IIO event constraints
  perf/x86/intel/uncore: Fix invalid unit check
  perf/x86/intel/uncore: Support extra IMC channel on Ice Lake server

Pull irq updates from Thomas Gleixner:
 "Updates for the interrupt subsystem:

  Core changes:

   - Prevent a potential deadlock when initial priority is assigned to a
     newly created interrupt thread. A recent change to plug a race
     between cpuset and __sched_setscheduler() introduced a new lock
     dependency which is now triggered. Break the lock dependency chain
     by moving the priority assignment to the thread function.

   - A couple of small updates to make the irq core RT safe.

   - Confine the irq_cpu_online/offline() API to the only left unfixable
     user Cavium Octeon so that it does not grow new usage.

   - A small documentation update

  Driver changes:

   - A large cross architecture rework to move irq_enter/exit() into the
     architecture code to make addressing the NOHZ_FULL/RCU issues
     simpler.

   - The obligatory new irq chip driver for Microchip EIC

   - Modularize a few irq chip drivers

   - Expand usage of devm_*() helpers throughout the driver code

   - The usual small fixes and improvements all over the place"

* tag 'irq-core-2021-10-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (53 commits)
  h8300: Fix linux/irqchip.h include mess
  dt-bindings: irqchip: renesas-irqc: Document r8a774e1 bindings
  MIPS: irq: Avoid an unused-variable error
  genirq: Hide irq_cpu_{on,off}line() behind a deprecated option
  irqchip/mips-gic: Get rid of the reliance on irq_cpu_online()
  MIPS: loongson64: Drop call to irq_cpu_offline()
  irq: remove handle_domain_{irq,nmi}()
  irq: remove CONFIG_HANDLE_DOMAIN_IRQ_IRQENTRY
  irq: riscv: perform irqentry in entry code
  irq: openrisc: perform irqentry in entry code
  irq: csky: perform irqentry in entry code
  irq: arm64: perform irqentry in entry code
  irq: arm: perform irqentry in entry code
  irq: add a (temporary) CONFIG_HANDLE_DOMAIN_IRQ_IRQENTRY
  irq: nds32: avoid CONFIG_HANDLE_DOMAIN_IRQ
  irq: arc: avoid CONFIG_HANDLE_DOMAIN_IRQ
  irq: add generic_handle_arch_irq()
  irq: unexport handle_irq_desc()
  irq: simplify handle_domain_{irq,nmi}()
  irq: mips: simplify do_domain_IRQ()
  ...

Pull btrfs updates from David Sterba:
 "The updates this time are more under the hood and enhancing existing
  features (subpage with compression and zoned namespaces).

  Performance related:

   - misc small inode logging improvements (+3% throughput, -11% latency
     on sample dbench workload)

   - more efficient directory logging: bulk item insertion, less tree
     searches and locking

   - speed up bulk insertion of items into a b-tree, which is used when
     logging directories, when running delayed items for directories
     (fsync and transaction commits) and when running the slow path
     (full sync) of an fsync (bulk creation run time -4%, deletion -12%)

  Core:

   - continued subpage support
      - make defragmentation work
      - make compression write work

   - zoned mode
      - support ZNS (zoned namespaces), zone capacity is number of
        usable blocks in each zone
      - add dedicated block group (zoned) for relocation, to prevent
        out of order writes in some cases
      - greedy block group reclaim, pick the ones with least usable
        space first

   - preparatory work for send protocol updates

   - error handling improvements

   - cleanups and refactoring

  Fixes:

   - lockdep warnings
      - in show_devname callback, on seeding device
      - device delete on loop device due to conversions to workqueues

   - fix deadlock between chunk allocation and chunk btree modifications

   - fix tracking of missing device count and status"

* tag 'for-5.16-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (140 commits)
  btrfs: remove root argument from check_item_in_log()
  btrfs: remove root argument from add_link()
  btrfs: remove root argument from btrfs_unlink_inode()
  btrfs: remove root argument from drop_one_dir_item()
  btrfs: clear MISSING device status bit in btrfs_close_one_device
  btrfs: call btrfs_check_rw_degradable only if there is a missing device
  btrfs: send: prepare for v2 protocol
  btrfs: fix comment about sector sizes supported in 64K systems
  btrfs: update device path inode time instead of bd_inode
  fs: export an inode_update_time helper
  btrfs: fix deadlock when defragging transparent huge pages
  btrfs: sysfs: convert scnprintf and snprintf to sysfs_emit
  btrfs: make btrfs_super_block size match BTRFS_SUPER_INFO_SIZE
  btrfs: update comments for chunk allocation -ENOSPC cases
  btrfs: fix deadlock between chunk allocation and chunk btree modifications
  btrfs: zoned: use greedy gc for auto reclaim
  btrfs: check-integrity: stop storing the block device name in btrfsic_dev_state
  btrfs: use btrfs_get_dev_args_from_path in dev removal ioctls
  btrfs: add a btrfs_get_dev_args_from_path helper
  btrfs: handle device lookup with btrfs_dev_lookup_args
  ...

Commit ccaa66c8 reinstated the kmap/kunmap that had been dropped in
commit 8c945d32 ("btrfs: compression: drop kmap/kunmap from lzo").

However, it seems to have done so incorrectly due to the change not
reverting cleanly, and lzo_decompress_bio() ended up not having a
matching "kunmap()" to the "kmap()" that was put back.

Also, any assert that the page pointer is not NULL should be before the
kmap() of said pointer, since otherwise you'd just oops in the kmap()
before the assert would even trigger.

I noticed this when trying to verify my btrfs merge, and things not
adding up.  I'm doing this fixup before re-doing my merge, because this
commit needs to also be backported to 5.15 (after verification from the
btrfs people).

Fixes: ccaa66c8 ("Revert 'btrfs: compression: drop kmap/kunmap from lzo'")
Cc: David Sterba <dsterba@suse.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull exfat fix from Namjae Jeon:
 "Fix ->i_blocks truncation issue caused by wrong 32bit mask"

* tag 'exfat-for-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat:
  exfat: fix incorrect loading of i_blocks for large files

In 1394 OHCI specification, Isochronous Receive DMA context has several
modes. One of mode is 'BufferFill' and Linux FireWire stack uses it to
receive isochronous packets for multiple isochronous channel as
FW_ISO_CONTEXT_RECEIVE_MULTICHANNEL.

The mode is not used by in-kernel driver, while it's available for
userspace. The character device driver in firewire-core includes
cast of function callback for the mode since the type of callback
function is different from the other modes. The case is inconvenient
to effort of Control Flow Integrity builds due to
-Wcast-function-type warning.

This commit removes the cast. A static helper function is newly added
to initialize isochronous context for the mode. The helper function
arranges isochronous context to assign specific callback function
after call of existent kernel API. It's noticeable that the number of
isochronous channel, speed, and the size of header are not required for
the mode. The helper function is used for the mode by character device
driver instead of direct call of existent kernel API.

The same goal can be achieved (in the ioctl_create_iso_context function)
without this helper function as follows:
- Call the fw_iso_context_create function passing NULL to the callback
  parameter.
- Then setting the context->callback.sc or context->callback.mc
  variables based on the a->type value.

However using the helper function created in this patch makes code more
clear and declarative. This way avoid the call to a function with one
purpose to achieved another one.
Co-developed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Co-developed-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Oscar Carter <oscar.carter@gmx.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Testeb-by: Takashi Sakamoto<o-takashi@sakamocchi.jp>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>

Pull erofs updates from Gao Xiang:
 "There are some new features available for this cycle. Firstly, EROFS
  LZMA algorithm support, specifically called MicroLZMA, is available as
  an option for embedded devices, LiveCDs and/or as the secondary
  auxiliary compression algorithm besides the primary algorithm in one
  file.

  In order to better support the LZMA fixed-sized output compression,
  especially for 4KiB pcluster size (which has lowest memory pressure
  thus useful for memory-sensitive scenarios), Lasse introduced a new
  LZMA header/container format called MicroLZMA to minimize the original
  LZMA1 header (for example, we don't need to waste 4-byte dictionary
  size and another 8-byte uncompressed size, which can be calculated by
  fs directly, for each pcluster) and enable EROFS fixed-sized output
  compression.

  Note that MicroLZMA can also be later used by other things in addition
  to EROFS too where wasting minimal amount of space for headers is
  important and it can be only compiled by enabling XZ_DEC_MICROLZMA.
  MicroLZMA has been supported by the latest upstream XZ embedded [1] &
  XZ utils [2], apply the latest related XZ embedded upstream patches by
  the XZ author Lasse here.

  Secondly, multiple device is also supported in this cycle, which is
  designed for multi-layer container images. By working together with
  inter-layer data deduplication and compression, we can achieve the
  next high-performance container image solution. Our team will announce
  the new Nydus container image service [3] implementation with new RAFS
  v6 (EROFS-compatible) format in Open Source Summit 2021 China [4]
  soon.

  Besides, the secondary compression head support and readmore
  decompression strategy are also included in this cycle. There are also
  some minor bugfixes and cleanups, as always.

  Summary:

   - support multiple devices for multi-layer container images;

   - support the secondary compression head;

   - support readmore decompression strategy;

   - support new LZMA algorithm (specifically called MicroLZMA);

   - some bugfixes & cleanups"

* tag 'erofs-for-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
  erofs: don't trigger WARN() when decompression fails
  erofs: get rid of ->lru usage
  erofs: lzma compression support
  erofs: rename some generic methods in decompressor
  lib/xz, lib/decompress_unxz.c: Fix spelling in comments
  lib/xz: Add MicroLZMA decoder
  lib/xz: Move s->lzma.len = 0 initialization to lzma_reset()
  lib/xz: Validate the value before assigning it to an enum variable
  lib/xz: Avoid overlapping memcpy() with invalid input with in-place decompression
  erofs: introduce readmore decompression strategy
  erofs: introduce the secondary compression head
  erofs: get compression algorithms directly on mapping
  erofs: add multiple device support
  erofs: decouple basic mount options from fs_context
  erofs: remove the fast path of per-CPU buffer decompression

Pull fscrypt updates from Eric Biggers:
 "Some cleanups for fs/crypto/:

   - Allow 256-bit master keys with AES-256-XTS

   - Improve documentation and comments

   - Remove unneeded field fscrypt_operations::max_namelen"

* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt:
  fscrypt: improve a few comments
  fscrypt: allow 256-bit master keys with AES-256-XTS
  fscrypt: improve documentation for inline encryption
  fscrypt: clean up comments in bio.c
  fscrypt: remove fscrypt_operations::max_namelen

Pull block inode sync updates from Jens Axboe:
 "This contains improvements to how bdev inode syncing is handled,
  unifying the API"

* tag 'for-5.16/inode-sync-2021-10-29' of git://git.kernel.dk/linux-block:
  block: simplify the block device syncing code
  ntfs3: use sync_blockdev_nowait
  fat: use sync_blockdev_nowait
  btrfs: use sync_blockdev
  xen-blkback: use sync_blockdev
  block: remove __sync_blockdev
  fs: remove __sync_filesystem