- 22 Jul, 2020 40 commits
-
-
Alexander Shishkin authored
commit e78e1fdb upstream. Connecting master to an output port when GTH driver module is not loaded triggers a NULL dereference: > RIP: 0010:intel_th_set_output+0x35/0x70 [intel_th] > Call Trace: > ? sth_stm_link+0x12/0x20 [intel_th_sth] > stm_source_link_store+0x164/0x270 [stm_core] > dev_attr_store+0x17/0x30 > sysfs_kf_write+0x3e/0x50 > kernfs_fop_write+0xda/0x1b0 > __vfs_write+0x1b/0x40 > vfs_write+0xb9/0x1a0 > ksys_write+0x67/0xe0 > __x64_sys_write+0x1a/0x20 > do_syscall_64+0x57/0x1d0 > entry_SYSCALL_64_after_hwframe+0x44/0xa9 Make sure the module in question is loaded and return an error if not. Signed-off-by:
Alexander Shishkin <alexander.shishkin@linux.intel.com> Fixes: 39f40346 ("intel_th: Add driver infrastructure for Intel(R) Trace Hub devices") Reviewed-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reported-by:
Ammy Yi <ammy.yi@intel.com> Tested-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alexander Shishkin authored
commit fd73d74a upstream. This adds support for the Trace Hub in Emmitsburg PCH. Signed-off-by:
-
Alexander Shishkin authored
commit 6227585d upstream. This adds support for the Trace Hub in Tiger Lake PCH-H. Signed-off-by:
-
Alexander Shishkin authored
commit 203c1f61 upstream. This adds support for the Trace Hub in Jasper Lake CPU. Signed-off-by:
-
Aneesh Kumar K.V authored
commit 192b6a78 upstream. Even if the IAMR value denies execute access, the current code returns true from pkey_access_permitted() for an execute permission check, if the AMR read pkey bit is cleared. This results in repeated page fault loop with a test like below: #define _GNU_SOURCE #include <errno.h> #include <stdio.h> #include <stdlib.h> #include <signal.h> #include <inttypes.h> #include <assert.h> #include <malloc.h> #include <unistd.h> #include <pthread.h> #include <sys/mman.h> #ifdef SYS_pkey_mprotect #undef SYS_pkey_mprotect #endif #ifdef SYS_pkey_alloc #undef SYS_pkey_alloc #endif #ifdef SYS_pkey_free #undef SYS_pkey_free #endif #undef PKEY_DISABLE_EXECUTE #define PKEY_DISABLE_EXECUTE 0x4 #define SYS_pkey_mprotect 386 #define SYS_pkey_alloc 384 #define SYS_pkey_free 385 #define PPC_INST_NOP 0x60000000 #define PPC_INST_BLR 0x4e800020 #define PROT_RWX (PROT_READ | PROT_WRITE | PROT_EXEC) static int sys_pkey_mprotect(void *addr, size_t len, int prot, int pkey) { return syscall(SYS_pkey_mprotect, addr, len, prot, pkey); } static int sys_pkey_alloc(unsigned long flags, unsigned long access_rights) { return syscall(SYS_pkey_alloc, flags, access_rights); } static int sys_pkey_free(int pkey) { return syscall(SYS_pkey_free, pkey); } static void do_execute(void *region) { /* jump to region */ asm volatile( "mtctr %0;" "bctrl" : : "r"(region) : "ctr", "lr"); } static void do_protect(void *region) { size_t pgsize; int i, pkey; pgsize = getpagesize(); pkey = sys_pkey_alloc(0, PKEY_DISABLE_EXECUTE); assert (pkey > 0); /* perform mprotect */ assert(!sys_pkey_mprotect(region, pgsize, PROT_RWX, pkey)); do_execute(region); /* free pkey */ assert(!sys_pkey_free(pkey)); } int main(int argc, char **argv) { size_t pgsize, numinsns; unsigned int *region; int i; /* allocate memory region to protect */ pgsize = getpagesize(); region = memalign(pgsize, pgsize); assert(region != NULL); assert(!mprotect(region, pgsize, PROT_RWX)); /* fill page with NOPs with a BLR at the end */ numinsns = pgsize / sizeof(region[0]); for (i = 0; i < numinsns - 1; i++) region[i] = PPC_INST_NOP; region[i] = PPC_INST_BLR; do_protect(region); return EXIT_SUCCESS; } The fix is to only check the IAMR for an execute check, the AMR value is not relevant. Fixes: f2407ef3 ("powerpc: helper to validate key-access permissions of a pte") Cc: stable@vger.kernel.org # v4.16+ Reported-by:
Sandipan Das <sandipan@linux.ibm.com> Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> [mpe: Add detail to change log, tweak wording & formatting] Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200712132047.1038594-1-aneesh.kumar@linux.ibm.comSigned-off-by:
-
Vishwas M authored
commit 14b0e83d upstream. This patch fixes a bug which does not let FAN mode to be changed from sysfs(pwm1_enable). i.e pwm1_enable can not be set to 3, it will always remain at 0. This is caused because the device driver handles the result of "read_u8_from_i2c(client, REG_FAN_CONF1, &conf_reg)" incorrectly. The driver thinks an error has occurred if the (result != 0). This has been fixed by changing the condition to (result < 0). Signed-off-by:
Vishwas M <vishwas.reddy.vr@gmail.com> Link: https://lore.kernel.org/r/20200707142747.118414-1-vishwas.reddy.vr@gmail.com Fixes: 9df7305b ("hwmon: Add driver for SMSC EMC2103 temperature monitor and fan controller") Cc: stable@vger.kernel.org Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Andreas Schwab authored
commit 0cac21b0 upstream. With the current 8KB stack size there are frequent overflows in a 64-bit configuration. We may split IRQ stacks off in the future, but this fixes a number of issues right now. Signed-off-by:
Andreas Schwab <schwab@suse.de> Reviewed-by:
Anup Patel <anup@brainfault.org> [Palmer: mention irqstack in the commit text] Fixes: 7db91e57 ("RISC-V: Task implementation") Cc: stable@vger.kernel.org Signed-off-by:
Palmer Dabbelt <palmerdabbelt@google.com> Signed-off-by:
-
Huacai Chen authored
Commit ed26aacf ("mips: Add udelay lpj numbers adjustment") has backported to 4.4~5.4, but the "struct cpufreq_freqs" (and also the cpufreq notifier machanism) of 4.4~4.19 are different from the upstream kernel. These differences cause build errors, and this patch can fix the build. Cc: Serge Semin <Sergey.Semin@baikalelectronics.ru> Cc: Stable <stable@vger.kernel.org> # 4.4/4.9/4.14/4.19 Signed-off-by:
Huacai Chen <chenhc@lemote.com> Signed-off-by:
-
Frederic Weisbecker authored
commit e2a71bde upstream. When an expiration delta falls into the last level of the wheel, that delta has be compared against the maximum possible delay and reduced to fit in if necessary. However instead of comparing the delta against the maximum, the code compares the actual expiry against the maximum. Then instead of fixing the delta to fit in, it sets the maximum delta as the expiry value. This can result in various undesired outcomes, the worst possible one being a timer expiring 15 days ahead to fire immediately. Fixes: 500462a9 ("timers: Switch to a non-cascading wheel") Signed-off-by:
Frederic Weisbecker <frederic@kernel.org> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20200717140551.29076-2-frederic@kernel.orgSigned-off-by:
-
Frederic Weisbecker authored
commit 30c66fc3 upstream. When a timer is enqueued with a negative delta (ie: expiry is below base->clk), it gets added to the wheel as expiring now (base->clk). Yet the value that gets stored in base->next_expiry, while calling trigger_dyntick_cpu(), is the initial timer->expires value. The resulting state becomes: base->next_expiry < base->clk On the next timer enqueue, forward_timer_base() may accidentally rewind base->clk. As a possible outcome, timers may expire way too early, the worst case being that the highest wheel levels get spuriously processed again. To prevent from that, make sure that base->next_expiry doesn't get below base->clk. Fixes: a683f390 ("timers: Forward the wheel clock whenever possible") Signed-off-by:
Anna-Maria Behnsen <anna-maria@linutronix.de> Tested-by:
Juri Lelli <juri.lelli@redhat.com> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20200703010657.2302-1-frederic@kernel.orgSigned-off-by:
-
Esben Haabendal authored
commit bf12fdf0 upstream. While e3a3c3a2 ("UIO: fix uio_pdrv_genirq with device tree but no interrupt") added support for using uio_pdrv_genirq for devices without interrupt for device tree platforms, the removal of uio_pdrv in 26dac3c4 ("uio: Remove uio_pdrv and use uio_pdrv_genirq instead") broke the support for non device tree platforms. This change fixes this, so that uio_pdrv_genirq can be used without interrupt on all platforms. This still leaves the support that uio_pdrv had for custom interrupt handler lacking, as uio_pdrv_genirq does not handle it (yet). Fixes: 26dac3c4 ("uio: Remove uio_pdrv and use uio_pdrv_genirq instead") Signed-off-by:
Esben Haabendal <esben@geanix.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200701145659.3978-3-esben@geanix.comSigned-off-by:
-
David Pedersen authored
commit 17d51429 upstream. This fixes two finger trackpad scroll on the Lenovo XiaoXin Air 12. Without nomux, the trackpad behaves as if only one finger is present and moves the cursor when trying to scroll. Signed-off-by:
David Pedersen <limero1337@gmail.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200625133754.291325-1-limero1337@gmail.comSigned-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Alexander Usyskin authored
commit e852c2c2 upstream. It's not needed to set driver to NULL in mei_cl_device_remove() which is bus_type remove() handler as this is done anyway in __device_release_driver(). Actually this is causing an endless loop in driver_detach() on ubuntu patched kernel, while removing (rmmod) the mei_hdcp module. The reason list_empty(&drv->p->klist_devices.k_list) is always not-empty. as the check is always true in __device_release_driver() if (dev->driver != drv) return; The non upstream patch is causing this behavior, titled: 'vfio -- release device lock before userspace requests' Nevertheless the fix is correct also for the upstream. Link: https://patchwork.ozlabs.org/project/ubuntu-kernel/patch/20180912085046.3401-2-apw@canonical.com/ Cc: <stable@vger.kernel.org> Cc: Andy Whitcroft <apw@canonical.com> Signed-off-by:
Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by:
Tomas Winkler <tomas.winkler@intel.com> Link: https://lore.kernel.org/r/20200628225359.2185929-1-tomas.winkler@intel.comSigned-off-by:
-
Wade Mealing authored
commit 853eab68 upstream. Turns out that the permissions for 0400 really are what we want here, otherwise any user can read from this file. [fixed formatting, added changelog, and made attribute static - gregkh] Reported-by:
Wade Mealing <wmealing@redhat.com> Cc: stable <stable@vger.kernel.org> Fixes: f40609d1 ("zram: convert remaining CLASS_ATTR() to CLASS_ATTR_RO()") Link: https://bugzilla.redhat.com/show_bug.cgi?id=1847832Reviewed-by:
Steffen Maier <maier@linux.ibm.com> Acked-by:
Minchan Kim <minchan@kernel.org> Link: https://lore.kernel.org/r/20200617114946.GA2131650@kroah.comSigned-off-by:
-
Chirantan Ekbote authored
commit 31070f6c upstream. The ioctl encoding for this parameter is a long but the documentation says it should be an int and the kernel drivers expect it to be an int. If the fuse driver treats this as a long it might end up scribbling over the stack of a userspace process that only allocated enough space for an int. This was previously discussed in [1] and a patch for fuse was proposed in [2]. From what I can tell the patch in [2] was nacked in favor of adding new, "fixed" ioctls and using those from userspace. However there is still no "fixed" version of these ioctls and the fact is that it's sometimes infeasible to change all userspace to use the new one. Handling the ioctls specially in the fuse driver seems like the most pragmatic way for fuse servers to support them without causing crashes in userspace applications that call them. [1]: https://lore.kernel.org/linux-fsdevel/20131126200559.GH20559@hall.aurel32.net/T/ [2]: https://sourceforge.net/p/fuse/mailman/message/31771759/Signed-off-by:
Chirantan Ekbote <chirantan@chromium.org> Fixes: 59efec7b ("fuse: implement ioctl support") Cc: <stable@vger.kernel.org> Signed-off-by:
Miklos Szeredi <mszeredi@redhat.com> Signed-off-by:
-
Amir Goldstein authored
commit 81a33c1e upstream. The check if user has changed the overlay file was wrong, causing unneeded call to ovl_change_flags() including taking f_lock on every file access. Fixes: d9899030 ("ovl: do not generate duplicate fsnotify events for "fake" path") Cc: <stable@vger.kernel.org> # v4.19+ Signed-off-by:
Amir Goldstein <amir73il@gmail.com> Signed-off-by:
-
Amir Goldstein authored
commit 124c2de2 upstream. Decoding a lower directory file handle to overlay path with cold inode/dentry cache may go as follows: 1. Decode real lower file handle to lower dir path 2. Check if lower dir is indexed (was copied up) 3. If indexed, get the upper dir path from index 4. Lookup upper dir path in overlay 5. If overlay path found, verify that overlay lower is the lower dir from step 1 On failure to verify step 5 above, user will get an ESTALE error and a WARN_ON will be printed. A mismatch in step 5 could be a result of lower directory that was renamed while overlay was offline, after that lower directory has been copied up and indexed. This is a scripted reproducer based on xfstest overlay/052: # Create lower subdir create_dirs create_test_files $lower/lowertestdir/subdir mount_dirs # Copy up lower dir and encode lower subdir file handle touch $SCRATCH_MNT/lowertestdir test_file_handles $SCRATCH_MNT/lowertestdir/subdir -p -o $tmp.fhandle # Rename lower dir offline unmount_dirs mv $lower/lowertestdir $lower/lowertestdir.new/ mount_dirs # Attempt to decode lower subdir file handle test_file_handles $SCRATCH_MNT -p -i $tmp.fhandle Since this WARN_ON() can be triggered by user we need to relax it. Fixes: 4b91c30a ("ovl: lookup connected ancestor of dir in inode cache") Cc: <stable@vger.kernel.org> # v4.16+ Signed-off-by:
-
youngjun authored
commit 24f14009 upstream. When "ovl_is_inuse" true case, trap inode reference not put. plus adding the comment explaining sequence of ovl_is_inuse after ovl_setup_trap. Fixes: 0be0bfd2 ("ovl: fix regression caused by overlapping layers detection") Cc: <stable@vger.kernel.org> # v4.19+ Reviewed-by:
youngjun <her0gyugyu@gmail.com> Signed-off-by:
-
Chuhong Yuan authored
commit d8edf8eb upstream. This driver calls ioremap() in probe, but it misses calling iounmap() in probe's error handler and remove. Add the missed calls to fix it. Fixes: 47d37d6f ("serial: Add auart driver for i.MX23/28") Signed-off-by:
Chuhong Yuan <hslester96@gmail.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200709135608.68290-1-hslester96@gmail.comSigned-off-by:
-
Alexander Lobakin authored
commit 897c44f0 upstream. rproc_serial_id_table lacks an exposure to module devicetable, so when remoteproc firmware requests VIRTIO_ID_RPROC_SERIAL, no uevent is generated and no module autoloading occurs. Add missing MODULE_DEVICE_TABLE() annotation and move the existing one for VIRTIO_ID_CONSOLE right to the table itself. Fixes: 1b637046 ("virtio_console: Add support for remoteproc serial") Cc: <stable@vger.kernel.org> # v3.8+ Signed-off-by:
Alexander Lobakin <alobakin@pm.me> Reviewed-by:
Amit Shah <amit@kernel.org> Link: https://lore.kernel.org/r/x7C_CbeJtoGMy258nwAXASYz3xgFMFpyzmUvOyZzRnQrgWCREBjaqBOpAUS7ol4NnZYvSVwmTsCG0Ohyfvta-ygw6HMHcoeKK0C3QFiAO_Q=@pm.meSigned-off-by:
-
Hans de Goede authored
commit 59d1d2e8 upstream. Check the passed in capabilities against VMMDEV_GUEST_CAPABILITIES_MASK instead of against VMMDEV_EVENT_VALID_EVENT_MASK. This tightens the allowed mask from 0x7ff to 0x7. Fixes: 0ba002bc ("virt: Add vboxguest driver for Virtual Box Guest integration") Cc: stable@vger.kernel.org Acked-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20200709120858.63928-3-hdegoede@redhat.comSigned-off-by:
-
Hans de Goede authored
commit f794db68 upstream. Until this commit the mainline kernel version (this version) of the vboxguest module contained a bug where it defined VBGL_IOCTL_VMMDEV_REQUEST_BIG and VBGL_IOCTL_LOG using _IOC(_IOC_READ | _IOC_WRITE, 'V', ...) instead of _IO(V, ...) as the out of tree VirtualBox upstream version does. Since the VirtualBox userspace bits are always built against VirtualBox upstream's headers, this means that so far the mainline kernel version of the vboxguest module has been failing these 2 ioctls with -ENOTTY. I guess that VBGL_IOCTL_VMMDEV_REQUEST_BIG is never used causing us to not hit that one and sofar the vboxguest driver has failed to actually log any log messages passed it through VBGL_IOCTL_LOG. This commit changes the VBGL_IOCTL_VMMDEV_REQUEST_BIG and VBGL_IOCTL_LOG defines to match the out of tree VirtualBox upstream vboxguest version, while keeping compatibility with the old wrong request defines so as to not break the kernel ABI in case someone has been using the old request defines. Fixes: f6ddd094 ("virt: Add vboxguest driver for Virtual Box Guest integration UAPI") Cc: stable@vger.kernel.org Acked-by:
-
AceLan Kao authored
commit da6902e5 upstream. Add support for Quectel Wireless Solutions Co., Ltd. EG95 LTE modem T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=02 Dev#= 5 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0195 Rev=03.18 S: Manufacturer=Android S: Product=Android C: #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) Signed-off-by:
AceLan Kao <acelan.kao@canonical.com> Cc: stable@vger.kernel.org Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Jörgen Storvist authored
commit 08d4ef5c upstream. Add USB IDs for GosunCn GM500 series cellular modules. RNDIS config: usb-devices T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 12 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=305a ProdID=1404 Rev=03.18 S: Manufacturer=Android S: Product=Android S: SerialNumber= C: #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 1 Cls=e0(wlcon) Sub=01 Prot=03 Driver=rndis_host I: If#=0x1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host I: If#=0x2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option MBIM config: usb-devices T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 11 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=305a ProdID=1405 Rev=03.18 S: Manufacturer=Android S: Product=Android S: SerialNumber= C: #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x3 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim I: If#=0x4 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim ECM config: usb-devices T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 13 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=305a ProdID=1406 Rev=03.18 S: Manufacturer=Android S: Product=Android S: SerialNumber= C: #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x3 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether I: If#=0x4 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether Signed-off-by:
Jörgen Storvist <jorgen.storvist@gmail.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Igor Moura authored
commit 5d0136f8 upstream. Add PID for CH340 that's found on some ESP8266 dev boards made by LilyGO. The specific device that contains such serial converter can be seen here: https://github.com/LilyGO/LILYGO-T-OI. Apparently, it's a regular CH340, but I've confirmed with others that also bought this board that the PID found on this device (0x7522) differs from other devices with the "same" converter (0x7523). Simply adding its PID to the driver and rebuilding it made it work as expected. Signed-off-by:
Igor Moura <imphilippini@gmail.com> Cc: stable@vger.kernel.org Signed-off-by:
-
James Hilliard authored
commit 5c45d04c upstream. This is a UPB (Universal Powerline Bus) PIM (Powerline Interface Module) which allows for controlling multiple UPB compatible devices from Linux using the standard serial interface. Based on vendor application source code there are two different models of USB based PIM devices in addition to a number of RS232 based PIM's. The vendor UPB application source contains the following USB ID's: #define USB_PCS_VENDOR_ID 0x04b4 #define USB_PCS_PIM_PRODUCT_ID 0x5500 #define USB_SAI_VENDOR_ID 0x17dd #define USB_SAI_PIM_PRODUCT_ID 0x5500 The first set of ID's correspond to the PIM variant sold by Powerline Control Systems while the second corresponds to the Simply Automated Incorporated PIM. As the product ID for both of these match the default cypress HID->COM RS232 product ID it assumed that they both use an internal variant of this HID->COM RS232 converter hardware. However as the vendor ID for the Simply Automated variant is different we need to also add it to the cypress_M8 driver so that it is properly detected. Signed-off-by:
James Hilliard <james.hilliard1@gmail.com> Link: https://lore.kernel.org/r/20200616220403.1807003-1-james.hilliard1@gmail.com Cc: stable@vger.kernel.org [ johan: amend VID define entry ] Signed-off-by:
-
Johan Hovold authored
commit e7b931be upstream. The driver would happily overwrite its write buffer with user data in 256 byte increments due to a removed buffer-space sanity check. Fixes: 5fcf62b0 ("tty: iuu_phoenix: fix locking.") Cc: stable <stable@vger.kernel.org> # 2.6.31 Signed-off-by:
-
Zhang Qiang authored
commit 8778eb09 upstream. Add a missing spinlock protection for play_queue, because the play_queue may be destroyed when the "playback_work" work func and "f_audio_out_ep_complete" callback func operate this paly_queue at the same time. Fixes: c6994e6f ("USB: gadget: add USB Audio Gadget driver") Cc: stable <stable@vger.kernel.org> Signed-off-by:
Zhang Qiang <qiang.zhang@windriver.com> Signed-off-by:
Felipe Balbi <balbi@kernel.org> Signed-off-by:
-
Peter Chen authored
commit 876d4e1e upstream. If wakeup event occurred by extcon event, it needs to call ci_irq again since the first ci_irq calling at extcon notifier only wakes up controller, but do noop for event handling, it causes the extcon use case can't work well from low power mode. Cc: <stable@vger.kernel.org> Fixes: 3ecb3e09 ("usb: chipidea: Use extcon framework for VBUS and ID detect") Reported-by:
Philippe Schenker <philippe.schenker@toradex.com> Tested-by:
Peter Chen <peter.chen@nxp.com> Link: https://lore.kernel.org/r/20200707060601.31907-2-peter.chen@kernel.orgSigned-off-by:
-
Minas Harutyunyan authored
commit 4fdf228c upstream. To avoid lot of interrupts from dwc2 core, which can be asserted in specific conditions need to disable interrupts on HW level instead of disable IRQs on Kernel level, because of IRQ can be shared between drivers. Cc: stable@vger.kernel.org Fixes: a40a0031 ("usb: dwc2: add shutdown callback to platform variant") Tested-by:
Frank Mori Hess <fmh6jj@gmail.com> Reviewed-by:
Alan Stern <stern@rowland.harvard.edu> Reviewed-by:
Doug Anderson <dianders@chromium.org> Reviewed-by:
Minas Harutyunyan <hminas@synopsys.com> Signed-off-by:
-
Tom Rix authored
commit 211f0834 upstream. clang static analysis flags this error c67x00-sched.c:489:55: warning: Use of memory after it is freed [unix.Malloc] usb_hcd_giveback_urb(c67x00_hcd_to_hcd(c67x00), urb, urbp->status); ^~~~~~~~~~~~ Problem happens in this block of code c67x00_release_urb(c67x00, urb); usb_hcd_unlink_urb_from_ep(c67x00_hcd_to_hcd(c67x00), urb); spin_unlock(&c67x00->lock); usb_hcd_giveback_urb(c67x00_hcd_to_hcd(c67x00), urb, urbp->status); In the call to c67x00_release_urb has this freeing of urbp urbp = urb->hcpriv; urb->hcpriv = NULL; list_del(&urbp->hep_node); kfree(urbp); And so urbp is freed before usb_hcd_giveback_urb uses it as its 3rd parameter. Since all is required is the status, pass the status directly as is done in c64x00_urb_dequeue Fixes: e9b29ffc ("USB: add Cypress c67x00 OTG controller HCD driver") Signed-off-by:
Tom Rix <trix@redhat.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200708131243.24336-1-trix@redhat.comSigned-off-by:
-
Kailang Yang authored
commit 473fbe13 upstream. ASUS UX533 and UX534 speaker still can't output. End User feedback speaker didn't have output. Add this COEF value will enable it. Fixes: 4e051106 ("ALSA: hda/realtek: Enable audio jacks of ASUS UX533FD with ALC294") Cc: <stable@vger.kernel.org> Signed-off-by:
Kailang Yang <kailang@realtek.com> Link: https://lore.kernel.org/r/80334402a93b48e385f8f4841b59ae09@realtek.comSigned-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Kailang Yang authored
commit ef9ddb9d upstream. ASUS platform couldn't need to use Headset Mode model. It changes to the suitable model. Signed-off-by:
-
Takashi Iwai authored
commit 9b7e5208 upstream. USB MIDI driver has an error recovery mechanism to resubmit the URB in the delayed timer handler, and this may race with the standard start / stop operations. Although both start and stop operations themselves don't race with each other due to the umidi->mutex protection, but this isn't applied to the timer handler. For fixing this potential race, the following changes are applied: - Since the timer handler can't use the mutex, we apply the umidi->disc_lock protection at each input stream URB submission; this also needs to change the GFP flag to GFP_ATOMIC - Add a check of the URB refcount and skip if already submitted - Move the timer cancel call at disconnection to the beginning of the procedure; this assures the in-flight timer handler is gone properly before killing all pending URBs Reported-by: syzbot+0f4ecfe6a2c322c81728@syzkaller.appspotmail.com Reported-by: syzbot+5f1d24c49c1d2c427497@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200710160656.16819-1-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
commit 68359a1a upstream. Recently syzkaller reported a UAF in LINE6 driver, and it's likely because we call cancel_delayed_work() at the disconnect callback instead of cancel_delayed_work_sync(). Let's use the correct one instead. Reported-by: syzbot+145012a46658ac00fc9e@syzkaller.appspotmail.com Suggested-by:
-
Takashi Iwai authored
commit 6e8a914a upstream. LINE6 drivers create stream URBs with a fixed pipe without checking its validity, and this may lead to a kernel WARNING at the submission when a malformed USB descriptor is passed. For avoiding the kernel warning, perform the similar sanity checks for each pipe type at creating a URB. Reported-by: syzbot+c190f6858a04ea7fbc52@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/s5hv9iv4hq8.wl-tiwai@suse.deSigned-off-by:
-
James Hilliard authored
commit 1ee1369b upstream. As this is a cypress HID->COM RS232 style device that is handled by the cypress_M8 driver we also need to add it to the ignore list in hid-quirks. Cc: stable <stable@vger.kernel.org> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Sebastian Parschauer authored
commit ca28aff0 upstream. The Obins Anne Pro 2 keyboard (04d9:a293) disconnects after a few minutes of inactivity when using it wired and typing does not result in any input events any more. This is a common firmware flaw. So add the ALWAYS_POLL quirk for this device. GitHub user Dietrich Moerman (dietrichm) tested the quirk and requested my help in my project https://github.com/sriemer/fix-linux-mouse issue 22 to provide this patch. Link: https://www.reddit.com/r/AnnePro/comments/gruzcb/anne_pro_2_linux_cant_type_after_inactivity/Signed-off-by:
Sebastian Parschauer <s.parschauer@gmx.de> Cc: stable@vger.kernel.org # v4.16+ Signed-off-by:
-
Dmitry Torokhov authored
commit 6363d206 upstream. Neither the trackpad, nor the mouse want input core to generate autorepeat events for their buttons, so let's reset the bit (as hid-input sets it for these devices based on the usage vendor code). Cc: stable@vger.kernel.org Reported-by:
Yariv <oigevald+kernel@gmail.com> Tested-by:
-
Saravana Kannan authored
commit 01360857 upstream. Adding missing corresponding of_node_put Fixes: 7588a511 ("slimbus: core: add support to device tree helper") Signed-off-by:
Saravana Kannan <saravanak@google.com> [Srini: added fixes tag, removed NULL check and updated log] Signed-off-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20200511151334.362-3-srinivas.kandagatla@linaro.orgSigned-off-by:
-
