Skip to content

L
linux
Switch branch/tag
  1. 03 Mar, 2011 4 commits
    • Ido Yariv's avatar
      wl12xx: Reorder data handling in irq_work · 8aad2464
      Ido Yariv authored 
      The FW has a limited amount of memory for holding frames. In case it
runs out of memory reserved for RX frames, it'll have no other choice
but to drop packets received from the AP. Thus, it is important to
handle RX data interrupts as soon as possible, before handling anything
else.

In addition, since there are enough TX descriptors to go around, it is
better to first send TX frames, and only then handle TX completions.

Fix this by changing the order of function calls in wl1271_irq_work.
Signed-off-by: default avatarIdo Yariv <ido@wizery.com>
Signed-off-by: default avatarOhad Ben-Cohen <ohad@wizery.com>
Reviewed-by: default avatarLuciano Coelho <coelho@ti.com>
Signed-off-by: default avatarLuciano Coelho <coelho@ti.com>
      8aad2464
    • Ido Yariv's avatar
      wl12xx: Remove private headers in wl1271_tx_reset · 50e9f746
      Ido Yariv authored 
      Frames in the tx_frames array include extra private headers, which must
be removed before passing the skbs to ieee80211_tx_status.

Fix this by removing any private headers in wl1271_tx_reset, similar to
how this is done in wl1271_tx_complete_packet.
Signed-off-by: default avatarIdo Yariv <ido@wizery.com>
Signed-off-by: default avatarArik Nemtsov <arik@wizery.com>
Signed-off-by: default avatarLuciano Coelho <coelho@ti.com>
      50e9f746
    • Ido Yariv's avatar
      wl12xx: Don't rely on runtime PM for toggling power · 11251e7e
      Ido Yariv authored 
      Runtime PM might not always be enabled. Even if it is enabled in the
running kernel, it can still be temporarily disabled, for instance
during suspend. Runtime PM is opportunistic in nature, and should not be
relied on for toggling power.

In case the interface is removed and re-added while runtime PM is
disabled, the FW will fail to boot, as it is mandatory to toggle power
between boots. For instance, this can happen during suspend in case one
of the devices fails to suspend before the MMC host suspends, but after
mac80211 was suspended. The interface will be removed and reactivated
without toggling the power.

Fix this by calling mmc_power_save_host/mmc_power_restore_host in
wl1271_sdio_power_on/off functions. It will toggle the power to the chip
even if runtime PM is disabled. The runtime PM functions should still be
called to make sure runtime PM does not opportunistically power the chip
off (e.g. after resuming from system suspend).
Signed-off-by: default avatarIdo Yariv <ido@wizery.com>
Signed-off-by: default avatarOhad Ben-Cohen <ohad@wizery.com>
Signed-off-by: default avatarLuciano Coelho <coelho@ti.com>
      11251e7e
    • Sebastien Jan's avatar
      wl12xx: fix the path to the wl12xx firmwares · f62c317c
      Sebastien Jan authored 
      In the linux-firmware git tree, the firmwares and the NVS are inside
the ti-connectivity directory.  Fix the filenames that the driver
looks for accordingly.

[Fixed commit message and merged with the latest changes. -- Luca]
Signed-off-by: default avatarSebastien Jan <s-jan@ti.com>
Signed-off-by: default avatarLuciano Coelho <coelho@ti.com>
      f62c317c
  3. 01 Mar, 2011 6 commits
  5. 28 Feb, 2011 14 commits
    • Stanislaw Gruszka's avatar
      iwlwifi: move remaining iwl-agn-rx.c code into iwl-rx.c · 67289941
      Stanislaw Gruszka authored 
      There is no need to have separate iwl-agn-rx.c file after iwlegacy
split.
Signed-off-by: default avatarStanislaw Gruszka <sgruszka@redhat.com>
Acked-by: default avatarWey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
      67289941
    • Stanislaw Gruszka's avatar
      iwlwifi: move check health code into iwl-rx.c · ad6e82a5
      Stanislaw Gruszka authored 
      Remove check_plcp_health and check_ack_health ops methods, they are
unneeded after iwlegacy driver split. Merge check health code into to
iwl-rx.c and make functions static.
Signed-off-by: default avatarStanislaw Gruszka <sgruszka@redhat.com>
Acked-by: default avatarWey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
      ad6e82a5
    • Stanislaw Gruszka's avatar
      iwlwifi: add {ack,plpc}_check module parameters · b7977ffa
      Stanislaw Gruszka authored 
      Add module ack_check, and plcp_check parameters. Ack_check is disabled
by default since is proved that check ack health can cause troubles.
Plcp_check is enabled by default.
Signed-off-by: default avatarStanislaw Gruszka <sgruszka@redhat.com>
Acked-by: default avatarWey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
      b7977ffa
    • Stanislaw Gruszka's avatar
      iwlegacy: fix dma mappings and skbs leak · 8a032c13
      Stanislaw Gruszka authored 
      Fix possible dma mappings and skbs introduced by commit
470058e0 "iwlwifi: avoid Tx queue
memory allocation in interface down".
Signed-off-by: default avatarStanislaw Gruszka <sgruszka@redhat.com>
Acked-by: default avatarWey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
      8a032c13
    • Stanislaw Gruszka's avatar
      iwlwifi: fix dma mappings and skbs leak · 387f3381
      Stanislaw Gruszka authored 
      Since commit commit 470058e0
"iwlwifi: avoid Tx queue memory allocation in interface down" we do
not unmap dma and free skbs when down device and there is pending
transfer. What in consequence may cause that system hung (waiting
for free skb's) when performing shutdown at iptables module unload.

DMA leak manifest itself following warning:

WARNING: at lib/dma-debug.c:689 dma_debug_device_change+0x15a/0x1b0()
Hardware name: HP xw8600 Workstation
pci 0000:80:00.0: DMA-API: device driver has pending DMA allocations while released from device [count=240]
Modules linked in: iwlagn(-) aes_x86_64 aes_generic fuse cpufreq_ondemand acpi_cpufreq freq_table mperf xt_physdev ipt_REJECT nf_conntrack_ipv4 nf_defrag_ipv4 iptable_filter ip_tables ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables ipv6 ext3 jbd dm_mirror dm_region_hash dm_log dm_mod uinput hp_wmi sparse_keymap sg wmi microcode serio_raw tg3 arc4 ecb shpchp mac80211 cfg80211 rfkill ext4 mbcache jbd2 sr_mod cdrom sd_mod crc_t10dif firewire_ohci firewire_core crc_itu_t mptsas mptscsih mptbase scsi_transport_sas pata_acpi ata_generic ata_piix ahci libahci floppy nouveau ttm drm_kms_helper drm i2c_algo_bit i2c_core video [last unloaded: iwlagn]
Pid: 9131, comm: rmmod Tainted: G        W   2.6.38-rc6-wl+ #33
Call Trace:
 [<ffffffff810649ef>] ? warn_slowpath_common+0x7f/0xc0
 [<ffffffff81064ae6>] ? warn_slowpath_fmt+0x46/0x50
 [<ffffffff812320ab>] ? dma_debug_device_change+0xdb/0x1b0
 [<ffffffff8123212a>] ? dma_debug_device_change+0x15a/0x1b0
 [<ffffffff8149dc18>] ? notifier_call_chain+0x58/0xb0
 [<ffffffff8108e370>] ? __blocking_notifier_call_chain+0x60/0x90
 [<ffffffff8108e3b6>] ? blocking_notifier_call_chain+0x16/0x20
 [<ffffffff812f570c>] ? __device_release_driver+0xbc/0xe0
 [<ffffffff812f5808>] ? driver_detach+0xd8/0xe0
 [<ffffffff812f45d1>] ? bus_remove_driver+0x91/0x100
 [<ffffffff812f6022>] ? driver_unregister+0x62/0xa0
 [<ffffffff8123d5d4>] ? pci_unregister_driver+0x44/0xa0
 [<ffffffffa05632d1>] ? iwl_exit+0x15/0x1c [iwlagn]
 [<ffffffff810ab492>] ? sys_delete_module+0x1a2/0x270
 [<ffffffff81498da9>] ? trace_hardirqs_on_thunk+0x3a/0x3f
 [<ffffffff8100bf42>] ? system_call_fastpath+0x16/0x1b

I still can observe above warning after apply patch, but it is very
hard to reproduce it, and have count=1. Whereas that one is easy to
reproduce using debugfs force_reset while transmitting data, and have
very big counts eg. 240, like quoted here. So count=1 WARNING seems
to be different issue that need to be resolved separately.

v1 -> v2: fix infinity loop bug I made during "for" to "while" loop transition.
v2 -> v3: remove unneeded EXPORT_SYMBOL
Signed-off-by: default avatarStanislaw Gruszka <sgruszka@redhat.com>
Acked-by: default avatarWey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
      387f3381
    • Senthil Balasubramanian's avatar
      ath9k: Fix incorrect GPIO LED pin for AR9485 · 15178535
      Senthil Balasubramanian authored 
      AR9485 doesn't use the default GPIO pin for LED and GPIO 6 is actually
used for this.
Signed-off-by: default avatarSenthil Balasubramanian <senthilkumar@atheros.com>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
      15178535
    • Felix Fietkau's avatar
      ath9k: use generic mac80211 LED blinking code · 0cf55c21
      Felix Fietkau authored 
      Signed-off-by: default avatarFelix Fietkau <nbd@openwrt.org>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
      0cf55c21
    • Felix Fietkau's avatar
      p54: fix a NULL pointer dereference bug · a5a7103f
      Felix Fietkau authored 
      If the RSSI calibration table was not found or not parsed properly,
priv->rssi_db will be NULL, p54_rssi_find needs to be able to deal
with that.
Signed-off-by: default avatarFelix Fietkau <nbd@openwrt.org>
Acked-by: default avatarChristian Lamparter <chunkeey@googlemail.com>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
      a5a7103f
    • Alessio Igor Bogani's avatar
      rtlwifi: fix places where uninitialized data is used · c2a7dca0
      Alessio Igor Bogani authored 
      drivers/net/wireless/rtlwifi/rtl8192ce/trx.c: In function ‘rtl92ce_rx_query_desc’:
drivers/net/wireless/rtlwifi/rtl8192ce/trx.c:255:5: warning: ‘rf_rx_num’ may be used uninitialized in this function
drivers/net/wireless/rtlwifi/rtl8192ce/trx.c:257:12: warning: ‘total_rssi’ may be used uninitialized in this function
drivers/net/wireless/rtlwifi/rtl8192ce/trx.c:466:6: warning: ‘weighting’ may be used uninitialized in this function

This work was supported by a hardware donation from the CE Linux Forum.
Signed-off-by: default avatarAlessio Igor Bogani <abogani@kernel.org>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
      c2a7dca0
    • Alessio Igor Bogani's avatar
      rtlwifi: Add the missing rcu_read_lock/unlock · 701c2be0
      Alessio Igor Bogani authored 
      ===================================================
[ INFO: suspicious rcu_dereference_check() usage. ]
---------------------------------------------------
net/mac80211/sta_info.c:125 invoked rcu_dereference_check() without protection!

other info that might help us debug this:

rcu_scheduler_active = 1, debug_locks = 0
5 locks held by wpa_supplicant/468:
 #0:  (rtnl_mutex){+.+.+.}, at: [<c1465d84>] rtnl_lock+0x14/0x20
 #1:  (&rdev->mtx){+.+.+.}, at: [<f84b8c2b>] cfg80211_mgd_wext_siwfreq+0x6b/0x170 [cfg80211]
 #2:  (&rdev->devlist_mtx){+.+.+.}, at: [<f84b8c37>] cfg80211_mgd_wext_siwfreq+0x77/0x170 [cfg80211]
 #3:  (&wdev->mtx){+.+.+.}, at: [<f84b8c44>] cfg80211_mgd_wext_siwfreq+0x84/0x170 [cfg80211]
 #4:  (&rtlpriv->locks.conf_mutex){+.+.+.}, at: [<f8506476>] rtl_op_bss_info_changed+0x26/0xc10 [rtlwifi]

stack backtrace:
Pid: 468, comm: wpa_supplicant Not tainted 2.6.38-rc6+ #79
Call Trace:
 [<c108806a>] ? lockdep_rcu_dereference+0xaa/0xb0
 [<f8523d2c>] ? sta_info_get_bss+0x19c/0x1b0 [mac80211]
 [<f8523d62>] ? ieee80211_find_sta+0x22/0x40 [mac80211]
 [<f850661c>] ? rtl_op_bss_info_changed+0x1cc/0xc10 [rtlwifi]
 [<c153671c>] ? __mutex_unlock_slowpath+0x14c/0x160
 [<c153673d>] ? mutex_unlock+0xd/0x10
 [<f8507180>] ? rtl_op_config+0x120/0x310 [rtlwifi]
 [<c10896db>] ? trace_hardirqs_on+0xb/0x10
 [<f8522169>] ? ieee80211_bss_info_change_notify+0xf9/0x1f0 [mac80211]
 [<f8506450>] ? rtl_op_bss_info_changed+0x0/0xc10 [rtlwifi]
 [<f853646f>] ? ieee80211_set_channel+0xbf/0xd0 [mac80211]
 [<f84b5f41>] ? cfg80211_set_freq+0x121/0x180 [cfg80211]
 [<f85363b0>] ? ieee80211_set_channel+0x0/0xd0 [mac80211]
 [<f84b8ceb>] ? cfg80211_mgd_wext_siwfreq+0x12b/0x170 [cfg80211]
 [<f84b87eb>] ? cfg80211_wext_siwfreq+0x9b/0x100 [cfg80211]
 [<c153b98b>] ? sub_preempt_count+0x7b/0xb0
 [<c150f874>] ? ioctl_standard_call+0x74/0x3b0
 [<c1465d84>] ? rtnl_lock+0x14/0x20
 [<f84b8750>] ? cfg80211_wext_siwfreq+0x0/0x100 [cfg80211]
 [<c14568bd>] ? __dev_get_by_name+0x8d/0xb0
 [<c150fddb>] ? wext_handle_ioctl+0x16b/0x180
 [<f84b8750>] ? cfg80211_wext_siwfreq+0x0/0x100 [cfg80211]
 [<c145bc7a>] ? dev_ioctl+0x5ba/0x720
 [<c108a947>] ? __lock_acquire+0x3e7/0x19b0
 [<c1443b0b>] ? sock_ioctl+0x1eb/0x290
 [<c108bfa5>] ? lock_release_non_nested+0x95/0x2f0
 [<c1443920>] ? sock_ioctl+0x0/0x290
 [<c114d74d>] ? do_vfs_ioctl+0x7d/0x5c0
 [<c1112232>] ? might_fault+0x62/0xb0
 [<c113e3c6>] ? fget_light+0x226/0x390
 [<c1112278>] ? might_fault+0xa8/0xb0
 [<c114dd17>] ? sys_ioctl+0x87/0x90
 [<c1002f9f>] ? sysenter_do_call+0x12/0x38

This work was supported by a hardware donation from the CE Linux Forum.
Signed-off-by: default avatarAlessio Igor Bogani <abogani@kernel.org>
Signed-off-by: default avatarLarry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
      701c2be0
    • Dan Carpenter's avatar
      iwlwifi: remove duplicate initialization · c3371d64
      Dan Carpenter authored 
      rate_mask is initialized again later so this can be removed.  Btw, if
rate_control_send_low(sta, priv_sta, txrc) returns false, that means
that "sta" is non-NULL.  That's why the second initialization of
rate_mask is a little simpler than the first.
Signed-off-by: default avatarDan Carpenter <error27@gmail.com>
Acked-by: default avatarWey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
      c3371d64
    • Gustavo F. Padovan's avatar
      Bluetooth: Fix BT_L2CAP and BT_SCO in Kconfig · d45dcef7
      Gustavo F. Padovan authored 
      If we want something "bool" built-in in something "tristate" it can't
"depend on" the tristate config option.

Report by DaveM:

   I give it 'y' just to make it happen, for both, and afterways no
   matter how many times I rerun "make oldconfig" I keep seeing things
   like this in my build:

scripts/kconfig/conf --silentoldconfig Kconfig
include/config/auto.conf:986:warning: symbol value 'm' invalid for BT_SCO
include/config/auto.conf:3156:warning: symbol value 'm' invalid for BT_L2CAP
Reported-by: default avatarDavid S. Miller <davem@davemloft.net>
Signed-off-by: default avatarGustavo F. Padovan <padovan@profusion.mobi>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
      d45dcef7
    • John W. Linville's avatar
      Merge branch 'wireless-next-2.6' of... · f54b92b9
      John W. Linville authored 
      Merge branch 'wireless-next-2.6' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-2.6
      f54b92b9
    • John W. Linville's avatar
      at76c50x-usb: fix warning caused by at76_mac80211_tx now returning void · 10889f13
      John W. Linville authored 
        CC [M]  drivers/net/wireless/at76c50x-usb.o
drivers/net/wireless/at76c50x-usb.c: In function ‘at76_mac80211_tx’:
drivers/net/wireless/at76c50x-usb.c:1759:4: warning: ‘return’ with a value, in function returning void

This is fallout from commit 7bb45683
("mac80211: make tx() operation return void").
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
      10889f13
  7. 26 Feb, 2011 5 commits
  9. 25 Feb, 2011 11 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7