- 08 Nov, 2019 6 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound fixes from Takashi Iwai: "It became a bit largish, but all small and good for 5.4: - A regression fix of ALSA timer code bug that sneaked in by a recent cleanup; never trust innocent-looking guys... - Fix for compress API max size check signedness - Fixes in HD-audio: CA0132 work stall, Intel Tigerlake HDMI - A few fixes for SOF: memory leak, sanity-check and build fixes - A collection of device-specific fixes: firewire, rockchip, ASoC HDMI, rsnd, ASoC HDA, stm32, TI, kirkwood, msm, max98373" * tag 'sound-5.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: timer: Fix incorrectly assigned timer instance ASoC: SOF: topology: Fix bytes control size checks ALSA: hda: hdmi - add Tigerlake support ASoC: max98373: replace gpio_request with devm_gpio_request ASoC: stm32: sai: add restriction on mmap support ALSA: hda/ca0132 - Fix possible workqueue stall ASoC: hdac_hda: fix race in device removal ALSA: bebob: fix to detect configured source of sampling clock for Focusrite Saffire Pro i/o series ASoC: rockchip: rockchip_max98090: Enable SHDN to fix headset detection ASoC: ti: sdma-pcm: Add back the flags parameter for non standard dma names ASoC: SOF: ipc: Fix memory leak in sof_set_get_large_ctrl_data ASoC: SOF: Fix memory leak in sof_dfsentry_write ASoC: SOF: Intel: hda-stream: fix the CONFIG_ prefix missing ASoC: kirkwood: fix device remove ordering ASoC: rsnd: dma: fix SSI9 4/5/6/7 busif dma address ASoC: hdmi-codec: drop mutex locking again ASoC: kirkwood: fix external clock probe defer ASoC: compress: fix unsigned integer overflow check ASoC: msm8916-wcd-analog: Fix RX1 selection in RDAC2 MUX -
git://anongit.freedesktop.org/drm/drmLinus Torvalds authored
Pull drm fixes from Dave Airlie: "Weekly fixes for drm: amdgpu has a few but they are pretty scattered fixes, the fbdev one is a build regression fix that we didn't want to risk leaving out, otherwise a couple of i915, one radeon and a core atomic fix. core: - add missing documentation for GEM shmem madvise helpers - Fix for a state dereference in atomic self-refresh helpers fbdev: - One compilation fix for c2p fbdev helpers amdgpu: - Fix navi14 display issue root cause and revert workaround - GPU reset scheduler interaction fix - Fix fan boost on multi-GPU - Gfx10 and sdma5 fixes for navi - GFXOFF fix for renoir - Add navi14 PCI ID - GPUVM fix for arcturus radeon: - Port an SI power fix from amdgpu i915: - Fix HPD poll to avoid kworker consuming a lot of cpu cycles. - Do not use TBT type for non Type-C ports" * tag 'drm-fixes-2019-11-08' of git://anongit.freedesktop.org/drm/drm: drm/radeon: fix si_enable_smc_cac() failed issue drm/amdgpu/renoir: move gfxoff handling into gfx9 module drm/amdgpu: add warning for GRBM 1-cycle delay issue in gfx9 drm/amdgpu: add dummy read by engines for some GCVM status registers in gfx10 drm/amdgpu: register gpu instance before fan boost feature enablment drm/amd/swSMU: fix smu workload bit map error drm/shmem: Add docbook comments for drm_gem_shmem_object madvise fields drm/amdgpu: add navi14 PCI ID Revert "drm/amd/display: setting the DIG_MODE to the correct value." drm/amd/display: Add ENGINE_ID_DIGD condition check for Navi14 drm/amdgpu: dont schedule jobs while in reset drm/amdgpu/arcturus: properly set BANK_SELECT and FRAGMENT_SIZE drm/atomic: fix self-refresh helpers crtc state dereference drm/i915/dp: Do not switch aux to TBT mode for non-TC ports drm/i915: Avoid HPD poll detect triggering a new detect cycle fbdev: c2p: Fix link failure on non-inlining
-
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linuxLinus Torvalds authored
Pull clk fixes from Stephen Boyd: "Fixes for various clk driver issues that happened because of code we merged this merge window. The Amlogic driver was missing some flags causing rates to be rounded improperly or clk_set_rate() to fail. The Samsung driver wasn't freeing everything on error paths and improperly saving/restoring PLL state across suspend/resume. The at91 driver was calling msleep() too early when scheduling hadn't started, so we put in place a quick solution until we can handle this sort of problem in the core framework. There were also problems with the Allwinner driver and operator precedence being incorrect causing subtle bugs. Finally, the TI driver was duplicating aliases and not delaying long enough leading to some unexpected timeouts" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: ti: clkctrl: Fix failed to enable error with double udelay timeout clk: ti: dra7-atl-clock: Remove ti_clk_add_alias call clk: sunxi-ng: a80: fix the zero'ing of bits 16 and 18 clk: sunxi: Fix operator precedence in sunxi_divs_clk_setup clk: ast2600: Fix enabling of clocks clk: at91: avoid sleeping early clk: imx8m: Use SYS_PLL1_800M as intermediate parent of CLK_ARM clk: samsung: exynos5420: Preserve PLL configuration during suspend/resume clk: samsung: exynos542x: Move G3D subsystem clocks to its sub-CMU clk: samsung: exynos5433: Fix error paths clk: at91: sam9x60: fix programmable clock clk: meson: g12a: set CLK_MUX_ROUND_CLOSEST on the cpu clock muxes clk: meson: g12a: fix cpu clock rate setting clk: meson: gxbb: let sar_adc_clk_div set the parent clock rate
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
drm-fixes-5.4-2019-11-06: amdgpu: - Fix navi14 display issue root cause and revert workaround - GPU reset scheduler interaction fix - Fix fan boost on multi-GPU - Gfx10 and sdma5 fixes for navi - GFXOFF fix for renoir - Add navi14 PCI ID - GPUVM fix for arcturus radeon: - Port an SI power fix from amdgpu Signed-off-by:
Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191107032241.1021217-1-alexander.deucher@amd.com
-
Dave Airlie authored
Merge tag 'drm-intel-fixes-2019-11-06' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - Fix HPD poll to avoid kworker consuming a lot of cpu cycles. - Do not use TBT type for non Type-C ports. Signed-off-by:
-
Dave Airlie authored
Merge tag 'drm-misc-fixes-2019-11-07-1' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes - Some new documentation for GEM shmem madvise helpers - Fix for a state dereference in atomic self-refresh helpers - One compilation fix for c2p fbdev helpers Signed-off-by:
-
- 07 Nov, 2019 8 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hidLinus Torvalds authored
Pull HID fixes from Jiri Kosina: "Two fixes for the HID subsystem: - regression fix for i2c-hid power management (Hans de Goede) - signed vs unsigned API fix for Wacom driver (Jason Gerecke)" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: HID: wacom: generic: Treat serial number and related fields as unsigned HID: i2c-hid: Send power-on command after reset
-
Takashi Iwai authored
Merge tag 'asoc-fix-v5.4-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v5.4 These are a collection of fixes since v5.4-rc4 that have accumilated, they're all driver specific and there's nothing major in here so it's probably not essential to actually send them but I'll leave that call to you.
-
Alex Deucher authored
Need to set the dte flag on this asic. Port the fix from amdgpu: 5cb818b8 ("drm/amd/amdgpu: fix si_enable_smc_cac() failed issue") Reviewed-by:
Yong Zhao <yong.zhao@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
Alex Deucher authored
To properly handle the option parsing ordering. Reviewed-by:
-
changzhu authored
It needs to add warning to update firmware in gfx9 in case that firmware is too old to have function to realize dummy read in cp firmware. Signed-off-by:
changzhu <Changfeng.Zhu@amd.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
changzhu authored
The GRBM register interface is now capable of bursting 1 cycle per register wr->wr, wr->rd much faster than previous muticycle per transaction done interface. This has caused a problem where status registers requiring HW to update have a 1 cycle delay, due to the register update having to go through GRBM. For cp ucode, it has realized dummy read in cp firmware.It covers the use of WAIT_REG_MEM operation 1 case only.So it needs to call gfx_v10_0_wait_reg_mem in gfx10. Besides it also needs to add warning to update firmware in case firmware is too old to have function to realize dummy read in cp firmware. For sdma ucode, it hasn't realized dummy read in sdma firmware. sdma is moved to gfxhub in gfx10. So it needs to add dummy read in driver between amdgpu_ring_emit_wreg and amdgpu_ring_emit_reg_wait for sdma_v5_0. Signed-off-by:
-
Evan Quan authored
Otherwise, the feature enablement will be skipped due to wrong count. Fixes: beff74bc ("drm/amdgpu: fix a race in GPU reset with IB test (v2)") Signed-off-by:
Evan Quan <evan.quan@amd.com> Reviewed-by:
-
Kevin Wang authored
fix workload bit (WORKLOAD_PPLIB_COMPUTE_BIT) map error on vega20 and navi asic. fix commit: drm/amd/powerplay: add function get_workload_type_map for swsmu Signed-off-by:
Kevin Wang <kevin1.wang@amd.com> Reviewed-by:
Kenneth Feng <kenneth.feng@amd.com> Signed-off-by:
-
- 06 Nov, 2019 26 commits
-
-
Rob Herring authored
Add missing docbook comments to madvise fields in struct drm_gem_shmem_object which fixes these warnings: include/drm/drm_gem_shmem_helper.h:87: warning: Function parameter or member 'madv' not described in 'drm_gem_shmem_object' include/drm/drm_gem_shmem_helper.h:87: warning: Function parameter or member 'madv_list' not described in 'drm_gem_shmem_object' Fixes: 17acb9f3 ("drm/shmem: Add madvise state and purge helpers") Reported-by:
Sean Paul <sean@poorly.run> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Signed-off-by:
Rob Herring <robh@kernel.org> Reviewed-by:
-
Jason Gerecke authored
The HID descriptors for most Wacom devices oddly declare the serial number and other related fields as signed integers. When these numbers are ingested by the HID subsystem, they are automatically sign-extended into 32-bit integers. We treat the fields as unsigned elsewhere in the kernel and userspace, however, so this sign-extension causes problems. In particular, the sign-extended tool ID sent to userspace as ABS_MISC does not properly match unsigned IDs used by xf86-input-wacom and libwacom. We introduce a function 'wacom_s32tou' that can undo the automatic sign extension performed by 'hid_snto32'. We call this function when processing the serial number and related fields to ensure that we are dealing with and reporting the unsigned form. We opt to use this method rather than adding a descriptor fixup in 'wacom_hid_usage_quirk' since it should be more robust in the face of future devices. Ref: https://github.com/linuxwacom/input-wacom/issues/134 Fixes: f85c9dc6 ("HID: wacom: generic: Support tool ID and additional tool types") CC: <stable@vger.kernel.org> # v4.10+ Signed-off-by:
Jason Gerecke <jason.gerecke@wacom.com> Reviewed-by:
Aaron Armstrong Skomra <aaron.skomra@wacom.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz>
-
Tianci.Yin authored
Add the navi14 PCI device id. Reviewed-by:
Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by:
Tianci.Yin <tianci.yin@amd.com> Signed-off-by:
-
Zhan Liu authored
This reverts commit 385857ad. Reason for revert: Root cause of this issue is found. The workaround is not needed anymore. Signed-off-by:
Zhan Liu <zhan.liu@amd.com> Reviewed-by:
Hersen Wu <hersenxs.wu@amd.com> Signed-off-by:
-
Zhan Liu authored
[Why] Navi10 has 6 PHY, but Navi14 only has 5 PHY, that is because there is no ENGINE_ID_DIGD in Navi14. Without this patch, many HDMI related issues (e.g. HDMI S3 resume failure, HDMI pink screen on boot) will be observed. [How] If "eng_id" is larger than ENGINE_ID_DIGD, then add "eng_id" by 1. Signed-off-by:
-
Shirish S authored
[Why] doing kthread_park()/unpark() from drm_sched_entity_fini while GPU reset is in progress defeats all the purpose of drm_sched_stop->kthread_park. If drm_sched_entity_fini->kthread_unpark() happens AFTER drm_sched_stop->kthread_park nothing prevents from another (third) thread to keep submitting job to HW which will be picked up by the unparked scheduler thread and try to submit to HW but fail because the HW ring is deactivated. [How] grab the reset lock before calling drm_sched_entity_fini() Signed-off-by:
Shirish S <shirish.s@amd.com> Suggested-by:
Andrey Grodzovsky <andrey.grodzovsky@amd.com> Signed-off-by:
-
Alex Deucher authored
These were not aligned for optimal performance for GPUVM. Reviewed-by:
-
Linus Torvalds authored
Merge more fixes from Andrew Morton: "17 fixes" Mostly mm fixes and one ocfs2 locking fix. * emailed patches from Andrew Morton <akpm@linux-foundation.org>: mm: memcontrol: fix network errors from failing __GFP_ATOMIC charges mm/memory_hotplug: fix updating the node span scripts/gdb: fix debugging modules compiled with hot/cold partitioning mm: slab: make page_cgroup_ino() to recognize non-compound slab pages properly MAINTAINERS: update information for "MEMORY MANAGEMENT" dump_stack: avoid the livelock of the dump_lock zswap: add Vitaly to the maintainers list mm/page_alloc.c: ratelimit allocation failure warnings more aggressively mm/khugepaged: fix might_sleep() warn with CONFIG_HIGHPTE=y mm, vmstat: reduce zone->lock holding time by /proc/pagetypeinfo mm, vmstat: hide /proc/pagetypeinfo from normal users mm/mmu_notifiers: use the right return code for WARN_ON ocfs2: protect extent tree in ocfs2_prepare_inode_for_write() mm: thp: handle page cache THP correctly in PageTransCompoundMap mm, meminit: recalculate pcpu batch and high limits after init completes mm/gup_benchmark: fix MAP_HUGETLB case mm: memcontrol: fix NULL-ptr deref in percpu stats flush
-
Rob Clark authored
drm_self_refresh_helper_update_avg_times() was incorrectly accessing the new incoming state after drm_atomic_helper_commit_hw_done(). But this state might have already been superceeded by an !nonblock atomic update resulting in dereferencing an already free'd crtc_state. TODO I *think* this will more or less do the right thing.. althought I'm not 100% sure if, for example, we enter psr in a nonblock commit, and then leave psr in a !nonblock commit that overtakes the completion of the nonblock commit. Not sure if this sort of scenario can happen in practice. But not crashing is better than crashing, so I guess we should either take this patch or rever the self-refresh helpers until Sean can figure out a better solution. Fixes: d4da4e33 ("drm: Measure Self Refresh Entry/Exit times to avoid thrashing") Cc: Sean Paul <seanpaul@chromium.org> Signed-off-by:
Rob Clark <robdclark@chromium.org> [seanpaul fixed up some checkpatch warns] Signed-off-by:
Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20191104173737.142558-1-robdclark@gmail.com
-
Takashi Iwai authored
The clean up commit 41672c0c ("ALSA: timer: Simplify error path in snd_timer_open()") unified the error handling code paths with the standard goto, but it introduced a subtle bug: the timer instance is stored in snd_timer_open() incorrectly even if it returns an error. This may eventually lead to UAF, as spotted by fuzzer. The culprit is the snd_timer_open() code checks the SNDRV_TIMER_IFLG_EXCLUSIVE flag with the common variable timeri. This variable is supposed to be the newly created instance, but we (ab-)used it for a temporary check before the actual creation of a timer instance. After that point, there is another check for the max number of instances, and it bails out if over the threshold. Before the refactoring above, it worked fine because the code returned directly from that point. After the refactoring, however, it jumps to the unified error path that stores the timeri variable in return -- even if it returns an error. Unfortunately this stored value is kept in the caller side (snd_timer_user_tselect()) in tu->timeri. This causes inconsistency later, as if the timer was successfully assigned. In this patch, we fix it by not re-using timeri variable but a temporary variable for testing the exclusive connection, so timeri remains NULL at that point. Fixes: 41672c0c ("ALSA: timer: Simplify error path in snd_timer_open()") Reported-and-tested-by:
Tristan Madani <tristmd@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191106165547.23518-1-tiwai@suse.deSigned-off-by:
Takashi Iwai <tiwai@suse.de>
-
Johannes Weiner authored
While upgrading from 4.16 to 5.2, we noticed these allocation errors in the log of the new kernel: SLUB: Unable to allocate memory on node -1, gfp=0xa20(GFP_ATOMIC) cache: tw_sock_TCPv6(960:helper-logs), object size: 232, buffer size: 240, default order: 1, min order: 0 node 0: slabs: 5, objs: 170, free: 0 slab_out_of_memory+1 ___slab_alloc+969 __slab_alloc+14 kmem_cache_alloc+346 inet_twsk_alloc+60 tcp_time_wait+46 tcp_fin+206 tcp_data_queue+2034 tcp_rcv_state_process+784 tcp_v6_do_rcv+405 __release_sock+118 tcp_close+385 inet_release+46 __sock_release+55 sock_close+17 __fput+170 task_work_run+127 exit_to_usermode_loop+191 do_syscall_64+212 entry_SYSCALL_64_after_hwframe+68 accompanied by an increase in machines going completely radio silent under memory pressure. One thing that changed since 4.16 is e699e2c6 ("net, mm: account sock objects to kmemcg"), which made these slab caches subject to cgroup memory accounting and control. The problem with that is that cgroups, unlike the page allocator, do not maintain dedicated atomic reserves. As a cgroup's usage hovers at its limit, atomic allocations - such as done during network rx - can fail consistently for extended periods of time. The kernel is not able to operate under these conditions. We don't want to revert the culprit patch, because it indeed tracks a potentially substantial amount of memory used by a cgroup. We also don't want to implement dedicated atomic reserves for cgroups. There is no point in keeping a fixed margin of unused bytes in the cgroup's memory budget to accomodate a consumer that is impossible to predict - we'd be wasting memory and get into configuration headaches, not unlike what we have going with min_free_kbytes. We do this for physical mem because we have to, but cgroups are an accounting game. Instead, account these privileged allocations to the cgroup, but let them bypass the configured limit if they have to. This way, we get the benefits of accounting the consumed memory and have it exert pressure on the rest of the cgroup, but like with the page allocator, we shift the burden of reclaimining on behalf of atomic allocations onto the regular allocations that can block. Link: http://lkml.kernel.org/r/20191022233708.365764-1-hannes@cmpxchg.org Fixes: e699e2c6 ("net, mm: account sock objects to kmemcg") Signed-off-by:Johannes Weiner <hannes@cmpxchg.org> Reviewed-by:
Shakeel Butt <shakeelb@google.com> Cc: Suleiman Souhlal <suleiman@google.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: <stable@vger.kernel.org> [4.18+] Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
David Hildenbrand authored
We recently started updating the node span based on the zone span to avoid touching uninitialized memmaps. Currently, we will always detect the node span to start at 0, meaning a node can easily span too many pages. pgdat_is_empty() will still work correctly if all zones span no pages. We should skip over all zones without spanned pages and properly handle the first detected zone that spans pages. Unfortunately, in contrast to the zone span (/proc/zoneinfo), the node span cannot easily be inspected and tested. The node span gives no real guarantees when an architecture supports memory hotplug, meaning it can easily contain holes or span pages of different nodes. The node span is not really used after init on architectures that support memory hotplug. E.g., we use it in mm/memory_hotplug.c:try_offline_node() and in mm/kmemleak.c:kmemleak_scan(). These users seem to be fine. Link: http://lkml.kernel.org/r/20191027222714.5313-1-david@redhat.com Fixes: 00d6c019 ("mm/memory_hotplug: don't access uninitialized memmaps in shrink_pgdat_span()") Signed-off-by:
David Hildenbrand <david@redhat.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Ilya Leoshkevich authored
gcc's -freorder-blocks-and-partition option makes it group frequently and infrequently used code in .text.hot and .text.unlikely sections respectively. At least when building modules on s390, this option is used by default. gdb assumes that all code is located in .text section, and that .text section is located at module load address. With such modules this is no longer the case: there is code in .text.hot and .text.unlikely, and either of them might precede .text. Fix by explicitly telling gdb the addresses of code sections. It might be tempting to do this for all sections, not only the ones in the white list. Unfortunately, gdb appears to have an issue, when telling it about e.g. loadable .note.gnu.build-id section causes it to think that non-loadable .note.Linux section is loaded at address 0, which in turn causes NULL pointers to be resolved to bogus symbols. So keep using the white list approach for the time being. Link: http://lkml.kernel.org/r/20191028152734.13065-1-iii@linux.ibm.comSigned-off-by:
Ilya Leoshkevich <iii@linux.ibm.com> Reviewed-by:
Jan Kiszka <jan.kiszka@siemens.com> Cc: Kieran Bingham <kbingham@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by:
-
Roman Gushchin authored
page_cgroup_ino() doesn't return a valid memcg pointer for non-compound slab pages, because it depends on PgHead AND PgSlab flags to be set to determine the memory cgroup from the kmem_cache. It's correct for compound pages, but not for generic small pages. Those don't have PgHead set, so it ends up returning zero. Fix this by replacing the condition to PageSlab() && !PageTail(). Before this patch: [root@localhost ~]# ./page-types -c /sys/fs/cgroup/user.slice/user-0.slice/user@0.service/ | grep slab 0x0000000000000080 38 0 _______S___________________________________ slab After this patch: [root@localhost ~]# ./page-types -c /sys/fs/cgroup/user.slice/user-0.slice/user@0.service/ | grep slab 0x0000000000000080 147 0 _______S___________________________________ slab Also, hwpoison_filter_task() uses output of page_cgroup_ino() in order to filter error injection events based on memcg. So if page_cgroup_ino() fails to return memcg pointer, we just fail to inject memory error. Considering that hwpoison filter is for testing, affected users are limited and the impact should be marginal. [n-horiguchi@ah.jp.nec.com: changelog additions] Link: http://lkml.kernel.org/r/20191031012151.2722280-1-guro@fb.com Fixes: 4d96ba35 ("mm: memcg/slab: stop setting page->mem_cgroup pointer for slab pages") Signed-off-by:
Roman Gushchin <guro@fb.com> Reviewed-by:
David Rientjes <rientjes@google.com> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Song Liu authored
I was trying to find the mm tree in MAINTAINERS by searching "Morton". Unfortunately, I didn't find one. And I didn't even locate the MEMORY MANAGEMENT section quickly, because Andrew's name was not listed there. Thanks to Johannes who helped me find the mm tree. Let save other's time searching around by adding: M: Andrew Morton <akpm@linux-foundation.org> T: git git://github.com/hnaz/linux-mm.git [akpm@linux-foundation.org: add ozlabs.org quilt trees] Link: http://lkml.kernel.org/r/20191030202217.3498133-1-songliubraving@fb.comSigned-off-by:
Song Liu <songliubraving@fb.com> Acked-by:
-
Kevin Hao authored
In the current code, we use the atomic_cmpxchg() to serialize the output of the dump_stack(), but this implementation suffers the thundering herd problem. We have observed such kind of livelock on a Marvell cn96xx board(24 cpus) when heavily using the dump_stack() in a kprobe handler. Actually we can let the competitors to wait for the releasing of the lock before jumping to atomic_cmpxchg(). This will definitely mitigate the thundering herd problem. Thanks Linus for the suggestion. [akpm@linux-foundation.org: fix comment] Link: http://lkml.kernel.org/r/20191030031637.6025-1-haokexin@gmail.com Fixes: b58d9774 ("dump_stack: serialize the output from dump_stack()") Signed-off-by:
Kevin Hao <haokexin@gmail.com> Suggested-by:
-
Vitaly Wool authored
Per conversation with Dan, add myself to the zswap MAINTAINERS list. Link: http://lkml.kernel.org/r/20191028143154.31304-1-vitaly.wool@konsulko.comSigned-off-by:
Vitaly Wool <vitaly.wool@konsulko.com> Acked-by:
Dan Streetman <ddstreet@ieee.org> Acked-by:
-
Johannes Weiner authored
While investigating a bug related to higher atomic allocation failures, we noticed the failure warnings positively drowning the console, and in our case trigger lockup warnings because of a serial console too slow to handle all that output. But even if we had a faster console, it's unclear what additional information the current level of repetition provides. Allocation failures happen for three reasons: The machine is OOM, the VM is failing to handle reasonable requests, or somebody is making unreasonable requests (and didn't acknowledge their opportunism with __GFP_NOWARN). Having the memory dump, a callstack, and the ratelimit stats on skipped failure warnings should provide enough information to let users/admins/developers know whether something is wrong and point them in the right direction for debugging, bpftracing etc. Limit allocation failure warnings to one spew every ten seconds. Link: http://lkml.kernel.org/r/20191028194906.26899-1-hannes@cmpxchg.orgSigned-off-by:
-
Ville Syrjälä authored
I got some khugepaged spew on a 32bit x86: BUG: sleeping function called from invalid context at include/linux/mmu_notifier.h:346 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 25, name: khugepaged INFO: lockdep is turned off. CPU: 1 PID: 25 Comm: khugepaged Not tainted 5.4.0-rc5-elk+ #206 Hardware name: System manufacturer P5Q-EM/P5Q-EM, BIOS 2203 07/08/2009 Call Trace: dump_stack+0x66/0x8e ___might_sleep.cold.96+0x95/0xa6 __might_sleep+0x2e/0x80 collapse_huge_page.isra.51+0x5ac/0x1360 khugepaged+0x9a9/0x20f0 kthread+0xf5/0x110 ret_from_fork+0x2e/0x38 Looks like it's due to CONFIG_HIGHPTE=y pte_offset_map()->kmap_atomic() vs. mmu_notifier_invalidate_range_start(). Let's do the naive approach and just reorder the two operations. Link: http://lkml.kernel.org/r/20191029201513.GG1208@intel.com Fixes: 810e24e0 ("mm/mmu_notifiers: annotate with might_sleep()") Signed-off-by:
Ville Syrjl <ville.syrjala@linux.intel.com> Reviewed-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Michal Hocko authored
pagetypeinfo_showfree_print is called by zone->lock held in irq mode. This is not really nice because it blocks both any interrupts on that cpu and the page allocator. On large machines this might even trigger the hard lockup detector. Considering the pagetypeinfo is a debugging tool we do not really need exact numbers here. The primary reason to look at the outuput is to see how pageblocks are spread among different migratetypes and low number of pages is much more interesting therefore putting a bound on the number of pages on the free_list sounds like a reasonable tradeoff. The new output will simply tell [...] Node 6, zone Normal, type Movable >100000 >100000 >100000 >100000 41019 31560 23996 10054 3229 983 648 instead of Node 6, zone Normal, type Movable 399568 294127 221558 102119 41019 31560 23996 10054 3229 983 648 The limit has been chosen arbitrary and it is a subject of a future change should there be a need for that. While we are at it, also drop the zone lock after each free_list iteration which will help with the IRQ and page allocator responsiveness even further as the IRQ lock held time is always bound to those 100k pages. [akpm@linux-foundation.org: tweak comment text, per David Hildenbrand] Link: http://lkml.kernel.org/r/20191025072610.18526-3-mhocko@kernel.orgSigned-off-by:
Michal Hocko <mhocko@suse.com> Suggested-by:
Waiman Long <longman@redhat.com> Acked-by:
Vlastimil Babka <vbabka@suse.cz> Acked-by:
Rafael Aquini <aquini@redhat.com> Acked-by:
-
Michal Hocko authored
/proc/pagetypeinfo is a debugging tool to examine internal page allocator state wrt to fragmentation. It is not very useful for any other use so normal users really do not need to read this file. Waiman Long has noticed that reading this file can have negative side effects because zone->lock is necessary for gathering data and that a) interferes with the page allocator and its users and b) can lead to hard lockups on large machines which have very long free_list. Reduce both issues by simply not exporting the file to regular users. Link: http://lkml.kernel.org/r/20191025072610.18526-2-mhocko@kernel.org Fixes: 467c996c ("Print out statistics in relation to fragmentation avoidance to /proc/pagetypeinfo") Signed-off-by:
Mel Gorman <mgorman@suse.de> Acked-by:
-
Jason Gunthorpe authored
The return code from the op callback is actually in _ret, while the WARN_ON was checking ret which causes it to misfire. Link: http://lkml.kernel.org/r/20191025175502.GA31127@ziepe.ca Fixes: 8402ce61 ("mm/mmu_notifiers: check if mmu notifier callbacks are allowed to fail") Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Reviewed-by:
-
Shuning Zhang authored
When the extent tree is modified, it should be protected by inode cluster lock and ip_alloc_sem. The extent tree is accessed and modified in the ocfs2_prepare_inode_for_write, but isn't protected by ip_alloc_sem. The following is a case. The function ocfs2_fiemap is accessing the extent tree, which is modified at the same time. kernel BUG at fs/ocfs2/extent_map.c:475! invalid opcode: 0000 [#1] SMP Modules linked in: tun ocfs2 ocfs2_nodemanager configfs ocfs2_stackglue [...] CPU: 16 PID: 14047 Comm: o2info Not tainted 4.1.12-124.23.1.el6uek.x86_64 #2 Hardware name: Oracle Corporation ORACLE SERVER X7-2L/ASM, MB MECH, X7-2L, BIOS 42040600 10/19/2018 task: ffff88019487e200 ti: ffff88003daa4000 task.ti: ffff88003daa4000 RIP: ocfs2_get_clusters_nocache.isra.11+0x390/0x550 [ocfs2] Call Trace: ocfs2_fiemap+0x1e3/0x430 [ocfs2] do_vfs_ioctl+0x155/0x510 SyS_ioctl+0x81/0xa0 system_call_fastpath+0x18/0xd8 Code: 18 48 c7 c6 60 7f 65 a0 31 c0 bb e2 ff ff ff 48 8b 4a 40 48 8b 7a 28 48 c7 c2 78 2d 66 a0 e8 38 4f 05 00 e9 28 fe ff ff 0f 1f 00 <0f> 0b 66 0f 1f 44 00 00 bb 86 ff ff ff e9 13 fe ff ff 66 0f 1f RIP ocfs2_get_clusters_nocache.isra.11+0x390/0x550 [ocfs2] ---[ end trace c8aa0c8180e869dc ]--- Kernel panic - not syncing: Fatal exception Kernel Offset: disabled This issue can be reproduced every week in a production environment. This issue is related to the usage mode. If others use ocfs2 in this mode, the kernel will panic frequently. [akpm@linux-foundation.org: coding style fixes] [Fix new warning due to unused function by removing said function - Linus ] Link: http://lkml.kernel.org/r/1568772175-2906-2-git-send-email-sunny.s.zhang@oracle.comSigned-off-by:Shuning Zhang <sunny.s.zhang@oracle.com> Reviewed-by:
Junxiao Bi <junxiao.bi@oracle.com> Reviewed-by:
Gang He <ghe@suse.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Joseph Qi <jiangqi903@gmail.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Jun Piao <piaojun@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Yang Shi authored
We have a usecase to use tmpfs as QEMU memory backend and we would like to take the advantage of THP as well. But, our test shows the EPT is not PMD mapped even though the underlying THP are PMD mapped on host. The number showed by /sys/kernel/debug/kvm/largepage is much less than the number of PMD mapped shmem pages as the below: 7f2778200000-7f2878200000 rw-s 00000000 00:14 262232 /dev/shm/qemu_back_mem.mem.Hz2hSf (deleted) Size: 4194304 kB [snip] AnonHugePages: 0 kB ShmemPmdMapped: 579584 kB [snip] Locked: 0 kB cat /sys/kernel/debug/kvm/largepages 12 And some benchmarks do worse than with anonymous THPs. By digging into the code we figured out that commit 127393fb ("mm: thp: kvm: fix memory corruption in KVM with THP enabled") checks if there is a single PTE mapping on the page for anonymous THP when setting up EPT map. But the _mapcount < 0 check doesn't work for page cache THP since every subpage of page cache THP would get _mapcount inc'ed once it is PMD mapped, so PageTransCompoundMap() always returns false for page cache THP. This would prevent KVM from setting up PMD mapped EPT entry. So we need handle page cache THP correctly. However, when page cache THP's PMD gets split, kernel just remove the map instead of setting up PTE map like what anonymous THP does. Before KVM calls get_user_pages() the subpages may get PTE mapped even though it is still a THP since the page cache THP may be mapped by other processes at the mean time. Checking its _mapcount and whether the THP has PTE mapped or not. Although this may report some false negative cases (PTE mapped by other processes), it looks not trivial to make this accurate. With this fix /sys/kernel/debug/kvm/largepage would show reasonable pages are PMD mapped by EPT as the below: 7fbeaee00000-7fbfaee00000 rw-s 00000000 00:14 275464 /dev/shm/qemu_back_mem.mem.SKUvat (deleted) Size: 4194304 kB [snip] AnonHugePages: 0 kB ShmemPmdMapped: 557056 kB [snip] Locked: 0 kB cat /sys/kernel/debug/kvm/largepages 271 And the benchmarks are as same as anonymous THPs. [yang.shi@linux.alibaba.com: v4] Link: http://lkml.kernel.org/r/1571865575-42913-1-git-send-email-yang.shi@linux.alibaba.com Link: http://lkml.kernel.org/r/1571769577-89735-1-git-send-email-yang.shi@linux.alibaba.com Fixes: dd78fedd ("rmap: support file thp") Signed-off-by:
Yang Shi <yang.shi@linux.alibaba.com> Reported-by:
Gang Deng <gavin.dg@linux.alibaba.com> Tested-by:
Hugh Dickins <hughd@google.com> Acked-by:
-
Mel Gorman authored
Deferred memory initialisation updates zone->managed_pages during the initialisation phase but before that finishes, the per-cpu page allocator (pcpu) calculates the number of pages allocated/freed in batches as well as the maximum number of pages allowed on a per-cpu list. As zone->managed_pages is not up to date yet, the pcpu initialisation calculates inappropriately low batch and high values. This increases zone lock contention quite severely in some cases with the degree of severity depending on how many CPUs share a local zone and the size of the zone. A private report indicated that kernel build times were excessive with extremely high system CPU usage. A perf profile indicated that a large chunk of time was lost on zone->lock contention. This patch recalculates the pcpu batch and high values after deferred initialisation completes for every populated zone in the system. It was tested on a 2-socket AMD EPYC 2 machine using a kernel compilation workload -- allmodconfig and all available CPUs. mmtests configuration: config-workload-kernbench-max Configuration was modified to build on a fresh XFS partition. kernbench 5.4.0-rc3 5.4.0-rc3 vanilla resetpcpu-v2 Amean user-256 13249.50 ( 0.00%) 16401.31 * -23.79%* Amean syst-256 14760.30 ( 0.00%) 4448.39 * 69.86%* Amean elsp-256 162.42 ( 0.00%) 119.13 * 26.65%* Stddev user-256 42.97 ( 0.00%) 19.15 ( 55.43%) Stddev syst-256 336.87 ( 0.00%) 6.71 ( 98.01%) Stddev elsp-256 2.46 ( 0.00%) 0.39 ( 84.03%) 5.4.0-rc3 5.4.0-rc3 vanilla resetpcpu-v2 Duration User 39766.24 49221.79 Duration System 44298.10 13361.67 Duration Elapsed 519.11 388.87 The patch reduces system CPU usage by 69.86% and total build time by 26.65%. The variance of system CPU usage is also much reduced. Before, this was the breakdown of batch and high values over all zones was: 256 batch: 1 256 batch: 63 512 batch: 7 256 high: 0 256 high: 378 512 high: 42 512 pcpu pagesets had a batch limit of 7 and a high limit of 42. After the patch: 256 batch: 1 768 batch: 63 256 high: 0 768 high: 378 [mgorman@techsingularity.net: fix merge/linkage snafu] Link: http://lkml.kernel.org/r/20191023084705.GD3016@techsingularity.netLink: http://lkml.kernel.org/r/20191021094808.28824-2-mgorman@techsingularity.netSigned-off-by:Mel Gorman <mgorman@techsingularity.net> Acked-by:
-
John Hubbard authored
The MAP_HUGETLB ("-H" option) of gup_benchmark fails: $ sudo ./gup_benchmark -H mmap: Invalid argument This is because gup_benchmark.c is passing in a file descriptor to mmap(), but the fd came from opening up the /dev/zero file. This confuses the mmap syscall implementation, which thinks that, if the caller did not specify MAP_ANONYMOUS, then the file must be a huge page file. So it attempts to verify that the file really is a huge page file, as you can see here: ksys_mmap_pgoff() { if (!(flags & MAP_ANONYMOUS)) { retval = -EINVAL; if (unlikely(flags & MAP_HUGETLB && !is_file_hugepages(file))) goto out_fput; /* THIS IS WHERE WE END UP */ else if (flags & MAP_HUGETLB) { ...proceed normally, /dev/zero is ok here... ...and of course is_file_hugepages() returns "false" for the /dev/zero file. The problem is that the user space program, gup_benchmark.c, really just wants anonymous memory here. The simplest way to get that is to pass MAP_ANONYMOUS whenever MAP_HUGETLB is specified, so that's what this patch does. Link: http://lkml.kernel.org/r/20191021212435.398153-2-jhubbard@nvidia.comSigned-off-by:John Hubbard <jhubbard@nvidia.com> Reviewed-by:
Jérôme Glisse <jglisse@redhat.com> Cc: Keith Busch <keith.busch@intel.com> Signed-off-by:
-
