- 09 Jul, 2020 7 commits
-
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/usb/chipidea/core.c:163: warning: Function parameter or member 'ci' not described in 'hw_port_test_set' Cc: Peter Chen <Peter.Chen@nxp.com> Cc: David Lopo <dlopo@chipidea.mips.com> Signed-off-by:
Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20200703174148.2749969-8-lee.jones@linaro.orgSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Lee Jones authored
No attempt has been made to document any of the functions here. Fixes the following W=1 kernel build warning(s): drivers/usb/misc/adutux.c:117: warning: Function parameter or member 'dev' not described in 'adu_abort_transfers' drivers/usb/misc/adutux.c:653: warning: Function parameter or member 'interface' not described in 'adu_probe' drivers/usb/misc/adutux.c:653: warning: Function parameter or member 'id' not described in 'adu_probe' drivers/usb/misc/adutux.c:762: warning: Function parameter or member 'interface' not described in 'adu_disconnect' Cc: Johan Hovold <johan@kernel.org> Cc: David Glance <davidgsf@sourceforge.net> Cc: Juergen Stuber <stuber@loria.fr> Signed-off-by:
-
Lee Jones authored
No attempt has been made to document any of the functions here. Fixes the following W=1 kernel build warning(s): drivers/usb/atm/ueagle-atm.c:578: warning: Function parameter or member 'usb' not described in 'uea_send_modem_cmd' drivers/usb/atm/ueagle-atm.c:578: warning: Function parameter or member 'addr' not described in 'uea_send_modem_cmd' drivers/usb/atm/ueagle-atm.c:578: warning: Function parameter or member 'size' not described in 'uea_send_modem_cmd' drivers/usb/atm/ueagle-atm.c:578: warning: Function parameter or member 'buff' not described in 'uea_send_modem_cmd' drivers/usb/atm/ueagle-atm.c:679: warning: Function parameter or member 'usb' not described in 'uea_load_firmware' drivers/usb/atm/ueagle-atm.c:679: warning: Function parameter or member 'ver' not described in 'uea_load_firmware' Cc: Matthieu CASTET <castet.matthieu@free.fr> Cc: Stanislaw Gruszka <stf_xl@wp.pl> Cc: Damien Bergamini <damien.bergamini@free.fr> Signed-off-by:
-
Lee Jones authored
No attempt has been made to document any of the functions here. Fixes the following W=1 kernel build warning(s): drivers/usb/core/ledtrig-usbport.c:42: warning: Function parameter or member 'usbport_data' not described in 'usbport_trig_usb_dev_observed' drivers/usb/core/ledtrig-usbport.c:42: warning: Function parameter or member 'usb_dev' not described in 'usbport_trig_usb_dev_observed' drivers/usb/core/ledtrig-usbport.c:71: warning: Function parameter or member 'usbport_data' not described in 'usbport_trig_update_count' drivers/usb/core/ledtrig-usbport.c:131: warning: Function parameter or member 'usbport_data' not described in 'usbport_trig_port_observed' drivers/usb/core/ledtrig-usbport.c:131: warning: Function parameter or member 'usb_dev' not described in 'usbport_trig_port_observed' drivers/usb/core/ledtrig-usbport.c:131: warning: Function parameter or member 'port1' not described in 'usbport_trig_port_observed' Cc: Rafał Miłecki <rafal@milecki.pl> Signed-off-by:
-
Lee Jones authored
No attempt has been made to document the function here. Fixes the following W=1 kernel build warning(s): drivers/usb/host/ohci-s3c2410.c:356: warning: Function parameter or member 'dev' not described in 'ohci_hcd_s3c2410_probe' Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Kukjin Kim <kgene@kernel.org> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Roman Weissgaerber <weissg@vienna.at> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Christopher Hoover <ch@hpl.hp.com> Cc: Ben Dooks <ben@simtec.co.uk> Cc: linux-samsung-soc@vger.kernel.org Signed-off-by:
-
Lee Jones authored
Without it, the build system complains that it was declared inside the parameter list. Fixes the following W=1 kernel build warning(s): In file included from drivers/usb/mtu3/mtu3_trace.c:11: drivers/usb/mtu3/mtu3_debug.h:29:36: warning: ‘struct ssusb_mtk’ declared inside parameter list will not be visible outside of this definition or declaration 29 | void ssusb_dev_debugfs_init(struct ssusb_mtk *ssusb); | ^~~~~~~~~ drivers/usb/mtu3/mtu3_debug.h:30:35: warning: ‘struct ssusb_mtk’ declared inside parameter list will not be visible outside of this definition or declaration 30 | void ssusb_dr_debugfs_init(struct ssusb_mtk *ssusb); | ^~~~~~~~~ drivers/usb/mtu3/mtu3_debug.h:31:39: warning: ‘struct ssusb_mtk’ declared inside parameter list will not be visible outside of this definition or declaration 31 | void ssusb_debugfs_create_root(struct ssusb_mtk *ssusb); | ^~~~~~~~~ drivers/usb/mtu3/mtu3_debug.h:32:39: warning: ‘struct ssusb_mtk’ declared inside parameter list will not be visible outside of this definition or declaration 32 | void ssusb_debugfs_remove_root(struct ssusb_mtk *ssusb); | ^~~~~~~~~ Cc: Chunfeng Yun <chunfeng.yun@mediatek.com> Cc: linux-mediatek@lists.infradead.org Signed-off-by:
-
Linus Walleij authored
The EHCI OMAP driver includes <linux/gpio.h> but does not use any symbols from this file, so drop it. Cc: Roger Quadros <rogerq@ti.com> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Reviewed-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20200703131059.515436-1-linus.walleij@linaro.orgSigned-off-by:
-
- 07 Jul, 2020 1 commit
-
-
Colton Lewis authored
Silence documentation build warning by correcting kernel-doc comment for sub_validate_langid function. ./drivers/usb/gadget/usbstring.c:77: warning: Function parameter or member 'langid' not described in 'usb_validate_langid' ./drivers/usb/gadget/usbstring.c:77: warning: Excess function parameter 'lang' description in 'usb_validate_langid' Signed-off-by:
Colton Lewis <colton.w.lewis@protonmail.com> Link: https://lore.kernel.org/r/20200707045207.235540-1-colton.w.lewis@protonmail.comSigned-off-by:
-
- 03 Jul, 2020 27 commits
-
-
Lee Jones authored
The value of 'maxsize' has not been checked since commit 729cac69 ("usb: dwc2: Change ISOC DDMA flow") back in 2018, so remove the set but unused variable, which fixes the following W=1 kernel build warning: drivers/usb/dwc2/gadget.c: In function ‘dwc2_gadget_fill_isoc_desc’: drivers/usb/dwc2/gadget.c:885:6: warning: variable ‘maxsize’ set but not used [-Wunused-but-set-variable] 885 | u32 maxsize = 0; | ^~~~~~~ Cc: Minas Harutyunyan <hminas@synopsys.com> Cc: Ben Dooks <ben@simtec.co.uk> Signed-off-by:
-
Greg Kroah-Hartman authored
No idea why this driver is using a char device node, statically allocated, with no dynamic allocation or hook up with devtmpfs, along with a reserverd major number, for "special" operations, not all of which ever were implemented. So just rip it out, as no one must be using it because no modern system will ever actually create the /dev/ node it needs. Cc: Felipe Balbi <balbi@kernel.org> Reviewed-by:
Ran Wang <ran.wang_1@nxp.com> Signed-off-by:
-
Greg Kroah-Hartman authored
This file has a HUGE debugging sysfs file that spews out a lot of information all at once, which violates the one-value-per-file rule for sysfs. If this is really needed, it should go into debugfs, but given the age of this driver, I strongly doubt anyone is using it anymore. So just remove the file entirely, it was never documented, so obviously, no one actually needed it :) Cc: Felipe Balbi <balbi@kernel.org> Reviewed-by:
-
Peter Chen authored
Add freescale USB PHY driver entry Signed-off-by:
Peter Chen <peter.chen@nxp.com> Link: https://lore.kernel.org/r/20200703063924.29799-1-peter.chen@nxp.comSigned-off-by:
-
Lee Jones authored
If we assign 'epnum' during the declaration we can also avoid "ISO C90 forbids mixed declarations" issues. So it does looks like we can have our cake and eat it in this scenario. Fixes the following W=1 kernel build warning(s): drivers/usb/host/oxu210hp-hcd.c: In function ‘submit_async’: drivers/usb/host/oxu210hp-hcd.c:2040:19: warning: variable ‘qtd’ set but not used [-Wunused-but-set-variable] 2040 | struct ehci_qtd *qtd; | ^~~ Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Rodolfo Giometti <giometti@linux.it> Cc: "Eurotech S.p.A" <info@eurtech.it> Signed-off-by:
-
Lee Jones authored
No attempt has been made to document any of the functions here. Fixes the following W=1 kernel build warning(s): drivers/usb/c67x00/c67x00-sched.c:35: warning: Function parameter or member 'queue' not described in 'c67x00_ep_data' drivers/usb/c67x00/c67x00-sched.c:35: warning: Function parameter or member 'node' not described in 'c67x00_ep_data' drivers/usb/c67x00/c67x00-sched.c:35: warning: Function parameter or member 'hep' not described in 'c67x00_ep_data' drivers/usb/c67x00/c67x00-sched.c:35: warning: Function parameter or member 'dev' not described in 'c67x00_ep_data' drivers/usb/c67x00/c67x00-sched.c:35: warning: Function parameter or member 'next_frame' not described in 'c67x00_ep_data' drivers/usb/c67x00/c67x00-sched.c:71: warning: Function parameter or member 'ly_base_addr' not described in 'c67x00_td' drivers/usb/c67x00/c67x00-sched.c:71: warning: Function parameter or member 'port_length' not described in 'c67x00_td' drivers/usb/c67x00/c67x00-sched.c:71: warning: Function parameter or member 'pid_ep' not described in 'c67x00_td' drivers/usb/c67x00/c67x00-sched.c:71: warning: Function parameter or member 'dev_addr' not described in 'c67x00_td' drivers/usb/c67x00/c67x00-sched.c:71: warning: Function parameter or member 'ctrl_reg' not described in 'c67x00_td' drivers/usb/c67x00/c67x00-sched.c:71: warning: Function parameter or member 'status' not described in 'c67x00_td' drivers/usb/c67x00/c67x00-sched.c:71: warning: Function parameter or member 'retry_cnt' not described in 'c67x00_td' drivers/usb/c67x00/c67x00-sched.c:71: warning: Function parameter or member 'residue' not described in 'c67x00_td' drivers/usb/c67x00/c67x00-sched.c:71: warning: Function parameter or member 'next_td_addr' not described in 'c67x00_td' drivers/usb/c67x00/c67x00-sched.c:71: warning: Function parameter or member 'td_list' not described in 'c67x00_td' drivers/usb/c67x00/c67x00-sched.c:71: warning: Function parameter or member 'td_addr' not described in 'c67x00_td' drivers/usb/c67x00/c67x00-sched.c:71: warning: Function parameter or member 'data' not described in 'c67x00_td' drivers/usb/c67x00/c67x00-sched.c:71: warning: Function parameter or member 'urb' not described in 'c67x00_td' drivers/usb/c67x00/c67x00-sched.c:71: warning: Function parameter or member 'privdata' not described in 'c67x00_td' drivers/usb/c67x00/c67x00-sched.c:71: warning: Function parameter or member 'ep_data' not described in 'c67x00_td' drivers/usb/c67x00/c67x00-sched.c:71: warning: Function parameter or member 'pipe' not described in 'c67x00_td' drivers/usb/c67x00/c67x00-sched.c:137: warning: Function parameter or member 'c67x00' not described in 'dbg_td' drivers/usb/c67x00/c67x00-sched.c:137: warning: Function parameter or member 'td' not described in 'dbg_td' drivers/usb/c67x00/c67x00-sched.c:137: warning: Function parameter or member 'msg' not described in 'dbg_td' drivers/usb/c67x00/c67x00-sched.c:169: warning: Function parameter or member 'a' not described in 'frame_add' drivers/usb/c67x00/c67x00-sched.c:169: warning: Function parameter or member 'b' not described in 'frame_add' drivers/usb/c67x00/c67x00-sched.c:177: warning: Function parameter or member 'a' not described in 'frame_after' drivers/usb/c67x00/c67x00-sched.c:177: warning: Function parameter or member 'b' not described in 'frame_after' drivers/usb/c67x00/c67x00-sched.c:186: warning: Function parameter or member 'a' not described in 'frame_after_eq' drivers/usb/c67x00/c67x00-sched.c:186: warning: Function parameter or member 'b' not described in 'frame_after_eq' drivers/usb/c67x00/c67x00-sched.c:199: warning: Function parameter or member 'c67x00' not described in 'c67x00_release_urb' drivers/usb/c67x00/c67x00-sched.c:199: warning: Function parameter or member 'urb' not described in 'c67x00_release_urb' drivers/usb/c67x00/c67x00-sched.c:566: warning: Function parameter or member 'c67x00' not described in 'c67x00_create_td' drivers/usb/c67x00/c67x00-sched.c:566: warning: Function parameter or member 'urb' not described in 'c67x00_create_td' drivers/usb/c67x00/c67x00-sched.c:566: warning: Function parameter or member 'data' not described in 'c67x00_create_td' drivers/usb/c67x00/c67x00-sched.c:566: warning: Function parameter or member 'len' not described in 'c67x00_create_td' drivers/usb/c67x00/c67x00-sched.c:566: warning: Function parameter or member 'pid' not described in 'c67x00_create_td' drivers/usb/c67x00/c67x00-sched.c:566: warning: Function parameter or member 'toggle' not described in 'c67x00_create_td' drivers/usb/c67x00/c67x00-sched.c:566: warning: Function parameter or member 'privdata' not described in 'c67x00_create_td' drivers/usb/c67x00/c67x00-sched.c:692: warning: Function parameter or member 'c67x00' not described in 'c67x00_add_ctrl_urb' drivers/usb/c67x00/c67x00-sched.c:692: warning: Function parameter or member 'urb' not described in 'c67x00_add_ctrl_urb' drivers/usb/c67x00/c67x00-sched.c:830: warning: Function parameter or member 'c67x00' not described in 'c67x00_parse_td' drivers/usb/c67x00/c67x00-sched.c:830: warning: Function parameter or member 'td' not described in 'c67x00_parse_td' drivers/usb/c67x00/c67x00-sched.c:978: warning: Function parameter or member 'c67x00' not described in 'c67x00_check_td_list' drivers/usb/c67x00/c67x00-sched.c:1052: warning: Function parameter or member 'c67x00' not described in 'c67x00_send_td' drivers/usb/c67x00/c67x00-sched.c:1052: warning: Function parameter or member 'td' not described in 'c67x00_send_td' drivers/usb/c67x00/c67x00-sched.c:1088: warning: Function parameter or member 'c67x00' not described in 'c67x00_do_work' Cc: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by:
-
Lee Jones authored
Demote usbtmc's file header to a standard comment block. Fixes the following W=1 kernel build warning(s): drivers/usb/class/usbtmc.c:11: warning: Function parameter or member 'fmt' not described in 'pr_fmt' Signed-off-by:
-
Lee Jones authored
No attempt has been made to document any of the functions here. Fixes the following W=1 kernel build warning(s): drivers/usb/c67x00/c67x00-ll-hpi.c:269: warning: Function parameter or member 'sie' not described in 'c67x00_ll_usb_clear_status' drivers/usb/c67x00/c67x00-ll-hpi.c:269: warning: Function parameter or member 'bits' not described in 'c67x00_ll_usb_clear_status' drivers/usb/c67x00/c67x00-ll-hpi.c:404: warning: Function parameter or member 'dev' not described in 'c67x00_ll_write_mem_le16' drivers/usb/c67x00/c67x00-ll-hpi.c:404: warning: Function parameter or member 'addr' not described in 'c67x00_ll_write_mem_le16' drivers/usb/c67x00/c67x00-ll-hpi.c:404: warning: Function parameter or member 'data' not described in 'c67x00_ll_write_mem_le16' drivers/usb/c67x00/c67x00-ll-hpi.c:404: warning: Function parameter or member 'len' not described in 'c67x00_ll_write_mem_le16' drivers/usb/c67x00/c67x00-ll-hpi.c:443: warning: Function parameter or member 'dev' not described in 'c67x00_ll_read_mem_le16' drivers/usb/c67x00/c67x00-ll-hpi.c:443: warning: Function parameter or member 'addr' not described in 'c67x00_ll_read_mem_le16' drivers/usb/c67x00/c67x00-ll-hpi.c:443: warning: Function parameter or member 'data' not described in 'c67x00_ll_read_mem_le16' drivers/usb/c67x00/c67x00-ll-hpi.c:443: warning: Function parameter or member 'len' not described in 'c67x00_ll_read_mem_le16' Cc: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by:
-
Lee Jones authored
No attempt has been made to document the function. Fixes the following W=1 kernel build warning(s): drivers/usb/mtu3/mtu3_core.c:805: warning: Function parameter or member 'mtu' not described in 'mtu3_set_dma_mask' Cc: Chunfeng Yun <chunfeng.yun@mediatek.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-mediatek@lists.infradead.org Signed-off-by:
-
Lee Jones authored
'zlp' was documented, but in the wrong place. Fixes the following W=1 kernel build warning(s): drivers/usb/cdns3/ep0.c:36: warning: Function parameter or member 'zlp' not described in 'cdns3_ep0_run_transfer' drivers/usb/cdns3/ep0.c:705: warning: Excess function parameter 'zlp' description in 'cdns3_gadget_ep0_queue' Cc: Pawel Laszczak <pawell@cadence.com> Cc: Pawel Jez <pjez@cadence.com> Cc: Peter Chen <peter.chen@nxp.com> Signed-off-by:
-
Lee Jones authored
drivers/usb/host/ohci.h in included by a whole much of different sourcefiles. Not all of them make use of cc_to_error. So mark it as __maybe_used to convey that this behaviour is not only acceptable it's expected. Fixes the following kernel build warning(s): In file included from drivers/usb/host/ohci-pci.c:25: drivers/usb/host/ohci.h:165:18: warning: ‘cc_to_error’ defined but not used [-Wunused-const-variable=] 165 | static const int cc_to_error 1 = { | ^~~~~~~~~~~ In file included from drivers/usb/host/ohci-platform.c:32: drivers/usb/host/ohci.h:165:18: warning: ‘cc_to_error’ defined but not used [-Wunused-const-variable=] 165 | static const int cc_to_error 1 = { | ^~~~~~~~~~~ In file included from drivers/usb/host/ohci-exynos.c:20: drivers/usb/host/ohci.h:165:18: warning: ‘cc_to_error’ defined but not used [-Wunused-const-variable=] 165 | static const int cc_to_error 1 = { | ^~~~~~~~~~~ In file included from drivers/usb/host/ohci-spear.c:22: drivers/usb/host/ohci.h:165:18: warning: ‘cc_to_error’ defined but not used [-Wunused-const-variable=] 165 | static const int cc_to_error 1 = { | ^~~~~~~~~~~ In file included from drivers/usb/host/ohci-st.c:26: drivers/usb/host/ohci.h:165:18: warning: ‘cc_to_error’ defined but not used [-Wunused-const-variable=] 165 | static const int cc_to_error 1 = { | ^~~~~~~~~~~ In file included from drivers/usb/host/ohci-at91.c:31: drivers/usb/host/ohci.h:165:18: warning: ‘cc_to_error’ defined but not used [-Wunused-const-variable=] 165 | static const int cc_to_error 1 = { | ^~~~~~~~~~~ In file included from drivers/usb/host/ohci-s3c2410.c:32: drivers/usb/host/ohci.h:165:18: warning: ‘cc_to_error’ defined but not used [-Wunused-const-variable=] 165 | static const int cc_to_error 1 = { | ^~~~~~~~~~~ Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Roman Weissgaerber <weissg@vienna.at> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: -
Lee Jones authored
Neither usb_hcd_at91_probe() nor usb_hcd_at91_remove()'s function headers reach the standards required of a kerneldoc entry. Only one attempt at describing an argument was made, as it is not correct (we're removing that too to save confusion). Fixes the following kernel build warning(s): drivers/usb/host/ohci-at91.c:166: warning: Function parameter or member 'driver' not described in 'usb_hcd_at91_probe' drivers/usb/host/ohci-at91.c:166: warning: Function parameter or member 'pdev' not described in 'usb_hcd_at91_probe' drivers/usb/host/ohci-at91.c:259: warning: Function parameter or member 'hcd' not described in 'usb_hcd_at91_remove' drivers/usb/host/ohci-at91.c:259: warning: Function parameter or member 'pdev' not described in 'usb_hcd_at91_remove' drivers/usb/host/ohci-at91.c:259: warning: Excess function parameter 'dev' description in 'usb_hcd_at91_remove' Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Ludovic Desroches <ludovic.desroches@microchip.com> Cc: Thibaut VARENE <varenet@parisc-linux.org> Signed-off-by:
-
Lee Jones authored
It would seem a shame to strip out all of the unused register entries, since they can act as a fair source of documentation. Instead, mark them all as __maybe_unused to show the build system that this behaviour is known and intentional. Fixes the following kernel build warning(s): In file included from drivers/usb/host/isp1362-hcd.c:96: drivers/usb/host/isp1362.h:59:22: warning: ‘ISP1362_REG_OTGALTTMR’ defined but not used [-Wunused-const-variable=] 59 | static isp1362_reg_t ISP1362_REG_##name = addr | ^~~~~~~~~~~~ drivers/usb/host/isp1362.h:199:1: note: in expansion of macro ‘ISP1362_REG’ 199 | ISP1362_REG(OTGALTTMR, 0x6C, REG_WIDTH_16, REG_ACCESS_RW); | ^~~~~~~~~~~ drivers/usb/host/isp1362.h:59:22: warning: ‘ISP1362_REG_OTGTIMER’ defined but not used [-Wunused-const-variable=] 59 | static isp1362_reg_t ISP1362_REG_##name = addr | ^~~~~~~~~~~~ drivers/usb/host/isp1362.h:198:1: note: in expansion of macro ‘ISP1362_REG’ 198 | ISP1362_REG(OTGTIMER, 0x6A, REG_WIDTH_16, REG_ACCESS_RW); | ^~~~~~~~~~~ drivers/usb/host/isp1362.h:59:22: warning: ‘ISP1362_REG_OTGINTENB’ defined but not used [-Wunused-const-variable=] 59 | static isp1362_reg_t ISP1362_REG_##name = addr | ^~~~~~~~~~~~ drivers/usb/host/isp1362.h:197:1: note: in expansion of macro ‘ISP1362_REG’ 197 | ISP1362_REG(OTGINTENB, 0x69, REG_WIDTH_16, REG_ACCESS_RW); | ^~~~~~~~~~~ drivers/usb/host/isp1362.h:59:22: warning: ‘ISP1362_REG_OTGINT’ defined but not used [-Wunused-const-variable=] 59 | static isp1362_reg_t ISP1362_REG_##name = addr | ^~~~~~~~~~~~ drivers/usb/host/isp1362.h:196:1: note: in expansion of macro ‘ISP1362_REG’ 196 | ISP1362_REG(OTGINT, 0x68, REG_WIDTH_16, REG_ACCESS_RW); | ^~~~~~~~~~~ drivers/usb/host/isp1362.h:59:22: warning: ‘ISP1362_REG_OTGSTATUS’ defined but not used [-Wunused-const-variable=] 59 | static isp1362_reg_t ISP1362_REG_##name = addr | ^~~~~~~~~~~~ drivers/usb/host/isp1362.h:195:1: note: in expansion of macro ‘ISP1362_REG’ 195 | ISP1362_REG(OTGSTATUS, 0x67, REG_WIDTH_16, REG_ACCESS_R); | ^~~~~~~~~~~ drivers/usb/host/isp1362.h:59:22: warning: ‘ISP1362_REG_OTGCONTROL’ defined but not used [-Wunused-const-variable=] 59 | static isp1362_reg_t ISP1362_REG_##name = addr | ^~~~~~~~~~~~ drivers/usb/host/isp1362.h:194:1: note: in expansion of macro ‘ISP1362_REG’ 194 | ISP1362_REG(OTGCONTROL, 0x62, REG_WIDTH_16, REG_ACCESS_RW); | ^~~~~~~~~~~ drivers/usb/host/isp1362.h:59:22: warning: ‘ISP1362_REG_HCATLPORT’ defined but not used [-Wunused-const-variable=] 59 | static isp1362_reg_t ISP1362_REG_##name = addr | ^~~~~~~~~~~~ drivers/usb/host/isp1362.h:183:1: note: in expansion of macro ‘ISP1362_REG’ 183 | ISP1362_REG(HCATLPORT, 0x44, REG_WIDTH_16, REG_ACCESS_RW); | ^~~~~~~~~~~ drivers/usb/host/isp1362.h:59:22: warning: ‘ISP1362_REG_HCINTLPORT’ defined but not used [-Wunused-const-variable=] 59 | static isp1362_reg_t ISP1362_REG_##name = addr | ^~~~~~~~~~~~ drivers/usb/host/isp1362.h:175:1: note: in expansion of macro ‘ISP1362_REG’ 175 | ISP1362_REG(HCINTLPORT, 0x43, REG_WIDTH_16, REG_ACCESS_RW); | ^~~~~~~~~~~ drivers/usb/host/isp1362.h:59:22: warning: ‘ISP1362_REG_HCISTL1PORT’ defined but not used [-Wunused-const-variable=] 59 | static isp1362_reg_t ISP1362_REG_##name = addr | ^~~~~~~~~~~~ drivers/usb/host/isp1362.h:171:1: note: in expansion of macro ‘ISP1362_REG’ 171 | ISP1362_REG(HCISTL1PORT, 0x42, REG_WIDTH_16, REG_ACCESS_RW); | ^~~~~~~~~~~ drivers/usb/host/isp1362.h:59:22: warning: ‘ISP1362_REG_HCISTL0PORT’ defined but not used [-Wunused-const-variable=] 59 | static isp1362_reg_t ISP1362_REG_##name = addr | ^~~~~~~~~~~~ drivers/usb/host/isp1362.h:170:1: note: in expansion of macro ‘ISP1362_REG’ 170 | ISP1362_REG(HCISTL0PORT, 0x40, REG_WIDTH_16, REG_ACCESS_RW); | ^~~~~~~~~~~ drivers/usb/host/isp1362.h:59:22: warning: ‘ISP1362_REG_HCINTDIS’ defined but not used [-Wunused-const-variable=] 59 | static isp1362_reg_t ISP1362_REG_##name = addr | ^~~~~~~~~~~~ drivers/usb/host/isp1362.h:77:1: note: in expansion of macro ‘ISP1362_REG’ 77 | ISP1362_REG(HCINTDIS, 0x05, REG_WIDTH_32, REG_ACCESS_RW); | ^~~~~~~~~~~ Cc: "by L. Wassmann" <LW@KARO-electronics.de> Signed-off-by:
-
Lee Jones authored
Fixes the following kernel build warning(s): drivers/usb/dwc3/dwc3-of-simple.c:25: warning: cannot understand function prototype: 'struct dwc3_of_simple ' Cc: Felipe Balbi <balbi@kernel.org> Cc: iivanov@mm-sol.com Cc: Sundeep Bhatta <subbaraya.sundeep.bhatta@xilinx.com> Signed-off-by:
-
Lee Jones authored
Mainline misspelled function argument descriptions. Also one formatting issue with a missing '@' identifier. Fixes the following W=1 build warnings: drivers/usb/cdns3/gadget.c:653: warning: Function parameter or member 'priv_ep' not described in 'cdns3_wa2_descmissing_packet' drivers/usb/cdns3/gadget.c:653: warning: Excess function parameter 'priv_dev' description in 'cdns3_wa2_descmissing_packet' drivers/usb/cdns3/gadget.c:1088: warning: Function parameter or member 'request' not described in 'cdns3_ep_run_transfer' drivers/usb/cdns3/gadget.c:2574: warning: Function parameter or member 'priv_ep' not described in '__cdns3_gadget_ep_set_halt' drivers/usb/cdns3/gadget.c:2574: warning: Excess function parameter 'ep' description in '__cdns3_gadget_ep_set_halt' drivers/usb/cdns3/gadget.c:2595: warning: Function parameter or member 'priv_ep' not described in '__cdns3_gadget_ep_clear_halt' drivers/usb/cdns3/gadget.c:2595: warning: Excess function parameter 'ep' description in '__cdns3_gadget_ep_clear_halt' drivers/usb/cdns3/gadget.c:2898: warning: Function parameter or member 'priv_dev' not described in 'cdns3_init_eps' drivers/usb/cdns3/gadget.c:2898: warning: Excess function parameter 'cdns3' description in 'cdns3_init_eps' drivers/usb/cdns3/gadget.c:3210: warning: Function parameter or member 'cdns' not described in 'cdns3_gadget_init' Cc: Pawel Laszczak <pawell@cadence.com> Cc: Pawel Jez <pjez@cadence.com> Cc: Peter Chen <peter.chen@nxp.com> Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warnings: drivers/usb/dwc3/dwc3-haps.c:19: warning: Incorrect use of kernel-doc format: * struct dwc3_haps - Driver private structure drivers/usb/dwc3/dwc3-haps.c:23: warning: cannot understand function prototype: 'struct dwc3_haps ' Cc: Felipe Balbi <balbi@kernel.org> Cc: Thinh Nguyen <thinhn@synopsys.com> Cc: John Youn <johnyoun@synopsys.com> Signed-off-by:
-
Lee Jones authored
Add some missing function argument descriptions for 'ep', 'desc' and 'zlp', and correct spelling/bitrot issues surrounding the correct spelling of present args. Fixes the following W=1 warnings: drivers/usb/cdns3/ep0.c:36: warning: Function parameter or member 'zlp' not described in 'cdns3_ep0_run_transfer' drivers/usb/cdns3/ep0.c:236: warning: Function parameter or member 'ctrl' not described in 'cdns3_req_ep0_get_status' drivers/usb/cdns3/ep0.c:236: warning: Excess function parameter 'ctrl_req' description in 'cdns3_req_ep0_get_status' drivers/usb/cdns3/ep0.c:411: warning: Function parameter or member 'ctrl' not described in 'cdns3_req_ep0_handle_feature' drivers/usb/cdns3/ep0.c:411: warning: Excess function parameter 'ctrl_req' description in 'cdns3_req_ep0_handle_feature' drivers/usb/cdns3/ep0.c:661: warning: Function parameter or member 'ep' not described in 'cdns3_gadget_ep0_enable' drivers/usb/cdns3/ep0.c:661: warning: Function parameter or member 'desc' not described in 'cdns3_gadget_ep0_enable' drivers/usb/cdns3/ep0.c:671: warning: Function parameter or member 'ep' not described in 'cdns3_gadget_ep0_disable' drivers/usb/cdns3/ep0.c:867: warning: Function parameter or member 'priv_ep' not described in 'cdns3_init_ep0' drivers/usb/cdns3/ep0.c:867: warning: Excess function parameter 'ep_priv' description in 'cdns3_init_ep0' Cc: Pawel Laszczak <pawell@cadence.com> Cc: Pawel Jez <pjez@cadence.com> Cc: Peter Chen <peter.chen@nxp.com> Signed-off-by:
-
Lee Jones authored
There are 3 misspellings and 1 incorrect format used in this file's kerneldoc function headers. Fixing them squashes the following W=1 kernel build warnings: drivers/usb/cdns3/gadget.c:653: warning: Function parameter or member 'priv_ep' not described in 'cdns3_wa2_descmissing_packet' drivers/usb/cdns3/gadget.c:653: warning: Excess function parameter 'priv_dev' description in 'cdns3_wa2_descmissing_packet' drivers/usb/cdns3/gadget.c:1088: warning: Function parameter or member 'request' not described in 'cdns3_ep_run_transfer' drivers/usb/cdns3/gadget.c:2574: warning: Function parameter or member 'priv_ep' not described in '__cdns3_gadget_ep_set_halt' drivers/usb/cdns3/gadget.c:2574: warning: Excess function parameter 'ep' description in '__cdns3_gadget_ep_set_halt' drivers/usb/cdns3/gadget.c:2595: warning: Function parameter or member 'priv_ep' not described in '__cdns3_gadget_ep_clear_halt' drivers/usb/cdns3/gadget.c:2595: warning: Excess function parameter 'ep' description in '__cdns3_gadget_ep_clear_halt' drivers/usb/cdns3/gadget.c:2898: warning: Function parameter or member 'priv_dev' not described in 'cdns3_init_eps' drivers/usb/cdns3/gadget.c:2898: warning: Excess function parameter 'cdns3' description in 'cdns3_init_eps' drivers/usb/cdns3/gadget.c:3210: warning: Function parameter or member 'cdns' not described in 'cdns3_gadget_init' Cc: Pawel Laszczak <pawell@cadence.com> Cc: Peter Chen <peter.chen@nxp.com> Cc: Roger Quadros <rogerq@ti.com> Signed-off-by:
-
Lee Jones authored
Description for 'pdev' argument was missing from the function header. Fixes the following W=1 warning: drivers/usb/host/ehci-omap.c:87: warning: Function parameter or member 'pdev' not described in 'ehci_hcd_omap_probe' Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Vikram Pandita <vikram.pandita@ti.com> Cc: Anand Gadiyar <gadiyar@ti.com> Cc: Keshava Munegowda <keshava_mgowda@ti.com> Cc: Roger Quadros <rogerq@ti.com> Cc: Felipe Balbi <felipe.balbi@nokia.com> Cc: linux-omap@vger.kernel.org Signed-off-by:
-
Lee Jones authored
Commit af566a0b ("usb: dwc3: omap: get rid of dma_status") rendered reading DMA status from the H/W even more redundant. The variable hasn't been read/used since 2016. Remove the set but unused variable and the call which populates it. Fixes the following W=1 warning: drivers/usb/dwc3/dwc3-omap.c: In function ‘dwc3_omap_probe’: drivers/usb/dwc3/dwc3-omap.c:460:8: warning: variable ‘reg’ set but not used [-Wunused-but-set-variable] 460 | u32 reg; | ^~~ Cc: Felipe Balbi <balbi@kernel.org> Cc: Andrzej Siewior <bigeasy@linutronix.de> Cc: linux-omap@vger.kernel.org Signed-off-by:
-
Lee Jones authored
Firstly, demote function header to standard comment block as they are not suitable for kerneldoc. Then provide description for ulpi_register_driver()'s argument 'module'. Finally rename description for ulpi_unregister_interface()'s 'ulpi' arg. Fixes the following W=1 warnings: drivers/usb/common/ulpi.c:23: warning: Function parameter or member 'ulpi' not described in 'ulpi_read' drivers/usb/common/ulpi.c:23: warning: Function parameter or member 'addr' not described in 'ulpi_read' drivers/usb/common/ulpi.c:150: warning: Function parameter or member 'module' not described in '__ulpi_register_driver' drivers/usb/common/ulpi.c:299: warning: Function parameter or member 'ulpi' not described in 'ulpi_unregister_interface' drivers/usb/common/ulpi.c:299: warning: Excess function parameter 'intrf' description in 'ulpi_unregister_interface' Cc: Felipe Balbi <balbi@kernel.org> Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by:
-
Lee Jones authored
Demote ulpi.c's file header to a standard comment block. Fixes the following W=1 build warning: drivers/usb/dwc3/ulpi.c:18: warning: Function parameter or member 'a' not described in 'DWC3_ULPI_ADDR' Cc: Felipe Balbi <balbi@kernel.org> Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by:
-
Lee Jones authored
Demote drd.c's file header to a standard comment block. Fixes the following W=1 build warnings: drivers/usb/dwc3/drd.c:20: warning: Function parameter or member 'dwc' not described in 'dwc3_otg_disable_events' drivers/usb/dwc3/drd.c:20: warning: Function parameter or member 'disable_mask' not described in 'dwc3_otg_disable_events' Cc: Felipe Balbi <balbi@kernel.org> Cc: Roger Quadros <rogerq@ti.com> Signed-off-by:
-
Lee Jones authored
This block lacks a title and argument descriptions. Fixes the following W=1 kernel build warning: drivers/usb/common/usb-conn-gpio.c:44: warning: Cannot understand * "DEVICE" = VBUS and "HOST" = !ID, so we have: on line 44 - I thought it was a doc line Cc: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by:
-
Lee Jones authored
File headers and simple comments are not kerneldoc worthy. Fixes the following W=1 warnings: drivers/usb/common/debug.c:15: warning: Function parameter or member 'bRequestType' not described in 'usb_decode_get_status' drivers/usb/common/debug.c:15: warning: Function parameter or member 'wIndex' not described in 'usb_decode_get_status' drivers/usb/common/debug.c:15: warning: Function parameter or member 'wLength' not described in 'usb_decode_get_status' drivers/usb/common/debug.c:15: warning: Function parameter or member 'str' not described in 'usb_decode_get_status' drivers/usb/common/debug.c:15: warning: Function parameter or member 'size' not described in 'usb_decode_get_status' drivers/usb/common/debug.c:216: warning: Function parameter or member 'str' not described in 'usb_decode_ctrl' drivers/usb/common/debug.c:216: warning: Function parameter or member 'size' not described in 'usb_decode_ctrl' drivers/usb/common/debug.c:216: warning: Function parameter or member 'bRequestType' not described in 'usb_decode_ctrl' drivers/usb/common/debug.c:216: warning: Function parameter or member 'bRequest' not described in 'usb_decode_ctrl' drivers/usb/common/debug.c:216: warning: Function parameter or member 'wValue' not described in 'usb_decode_ctrl' drivers/usb/common/debug.c:216: warning: Function parameter or member 'wIndex' not described in 'usb_decode_ctrl' drivers/usb/common/debug.c:216: warning: Function parameter or member 'wLength' not described in 'usb_decode_ctrl' Cc: Pawel Laszczak <pawell@cadence.com> Cc: Felipe Balbi <felipe.balbi@linux.intel.com> Cc: Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by:
-
Lee Jones authored
quirk_usb_handoff_xhci()'s function header is the only one across the sourcefile which is denoted as a kerneldoc header. Despite no attempt to document its arguments. Drop it down in status from kerneldoc to a standard comment block to match the other headers in the file. Fixes the following W=1 kernel build warning: drivers/usb/host/pci-quirks.c:1145: warning: Function parameter or member 'pdev' not described in 'quirk_usb_handoff_xhci' Cc: Mathias Nyman <mathias.nyman@intel.com> Cc: Martin Mares <mj@ucw.cz> Cc: aleksey_gorelov@phoenix.com Signed-off-by:
-
Lee Jones authored
Kerneldoc expects arg descriptions to be in the format '@.*: '. If either the '@' or the ':' is omitted then kerneldoc complains that the description is missing. Add the missing ':'s here. Also provide a new description for 'event'. Fixes the following kernel build W=1 warnings: drivers/usb/phy/phy.c:106: warning: Function parameter or member 'work' not described in 'usb_phy_notify_charger_work' drivers/usb/phy/phy.c:172: warning: Function parameter or member 'nb' not described in 'usb_phy_get_charger_type' drivers/usb/phy/phy.c:172: warning: Function parameter or member 'state' not described in 'usb_phy_get_charger_type' drivers/usb/phy/phy.c:172: warning: Function parameter or member 'data' not described in 'usb_phy_get_charger_type' drivers/usb/phy/phy.c:194: warning: Function parameter or member 'usb_phy' not described in 'usb_phy_set_charger_current' drivers/usb/phy/phy.c:194: warning: Function parameter or member 'mA' not described in 'usb_phy_set_charger_current' drivers/usb/phy/phy.c:244: warning: Function parameter or member 'usb_phy' not described in 'usb_phy_get_charger_current' drivers/usb/phy/phy.c:244: warning: Function parameter or member 'min' not described in 'usb_phy_get_charger_current' drivers/usb/phy/phy.c:244: warning: Function parameter or member 'max' not described in 'usb_phy_get_charger_current' drivers/usb/phy/phy.c:281: warning: Function parameter or member 'usb_phy' not described in 'usb_phy_set_charger_state' drivers/usb/phy/phy.c:281: warning: Function parameter or member 'state' not described in 'usb_phy_set_charger_state' drivers/usb/phy/phy.c:427: warning: Function parameter or member 'dev' not described in 'devm_usb_get_phy' drivers/usb/phy/phy.c:427: warning: Function parameter or member 'type' not described in 'devm_usb_get_phy' drivers/usb/phy/phy.c:456: warning: Function parameter or member 'type' not described in 'usb_get_phy' drivers/usb/phy/phy.c:500: warning: Function parameter or member 'dev' not described in 'devm_usb_get_phy_by_node' drivers/usb/phy/phy.c:500: warning: Function parameter or member 'node' not described in 'devm_usb_get_phy_by_node' drivers/usb/phy/phy.c:500: warning: Function parameter or member 'nb' not described in 'devm_usb_get_phy_by_node' drivers/usb/phy/phy.c:558: warning: Function parameter or member 'dev' not described in 'devm_usb_get_phy_by_phandle' drivers/usb/phy/phy.c:558: warning: Function parameter or member 'phandle' not described in 'devm_usb_get_phy_by_phandle' drivers/usb/phy/phy.c:558: warning: Function parameter or member 'index' not described in 'devm_usb_get_phy_by_phandle' drivers/usb/phy/phy.c:590: warning: Function parameter or member 'dev' not described in 'devm_usb_put_phy' drivers/usb/phy/phy.c:590: warning: Function parameter or member 'phy' not described in 'devm_usb_put_phy' drivers/usb/phy/phy.c:627: warning: Function parameter or member 'type' not described in 'usb_add_phy' drivers/usb/phy/phy.c:721: warning: Function parameter or member 'event' not described in 'usb_phy_set_event' Cc: Felipe Balbi <balbi@kernel.org> Signed-off-by:
-
- 02 Jul, 2020 1 commit
-
-
Greg Kroah-Hartman authored
USB is a HOST/DEVICE protocol, as per the specification and all documentation. Fix up terms that are not applicable to make things match up with the terms used through the rest of the USB stack. Acked-by:
Felipe Balbi <balbi@kernel.org> Link: https://lore.kernel.org/r/20200701171555.3198836-1-gregkh@linuxfoundation.orgSigned-off-by:
-
- 01 Jul, 2020 4 commits
-
-
Heikki Krogerus authored
The PMC mux-agent can be used also to enter USB4 mode. The mux-agent does not have USB4 specific message, but it can be put into the TBT3 alternate mode also with USB4. That is OK because the controller is in any case the same with TBT3 and USB4. Signed-off-by:
Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20200701115618.22482-5-heikki.krogerus@linux.intel.comSigned-off-by:
-
Heikki Krogerus authored
Adding definitions for the two status bits that we have in the command response data structure. Also, from now on only considering the second status bit, which tells was the failure fatal or not, if the first bit is set. If the first bit is not set, then the command was successful, and we need to ignore the second bit. Signed-off-by:
-
Heikki Krogerus authored
This data structure can be delivered to the mux drivers when Enter_USB Message is used exactly the same way as the Alternate Mode specific data structures are delivered to the mux drivers when Enter Mode Messages are used. The Enter_USB data structure shall have all details related to the Enter_USB Message, most importantly the Enter_USB Date Object that was used. Signed-off-by:
-
Heikki Krogerus authored
There is no need to describe them sparately. Signed-off-by:
-
