XSAVEC is the user space counterpart of XSAVES which cannot save supervisor
state. In virtualization scenarios the hypervisor does not expose XSAVES
but XSAVEC to the guest, though the kernel does not make use of it.

That's unfortunate because XSAVEC uses the compacted format of saving the
XSTATE. This is more efficient in terms of storage space vs. XSAVE[OPT] as
it does not create holes for XSTATE components which are not supported or
enabled by the kernel but are available in hardware. There is room for
further optimizations when XSAVEC/S and XGETBV1 are supported.

In order to support XSAVEC:

 - Define the XSAVEC ASM macro as it's not yet supported by the required
   minimal toolchain.

 - Create a software defined X86_FEATURE_XCOMPACTED to select the compacted
   XSTATE buffer format for both XSAVEC and XSAVES.

 - Make XSAVEC an option in the 'XSAVE' ASM alternatives
Requested-by: Andrew Cooper <Andrew.Cooper3@citrix.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20220404104820.598704095@linutronix.de

Pull scheduler fix from Borislav Petkov:

 - Fix a corner case when calculating sched runqueue variables

That fix also removes a check for a zero divisor in the code, without
mentioning it.  Vincent clarified that it's ok after I whined about it:

  https://lore.kernel.org/all/CAKfTPtD2QEyZ6ADd5WrwETMOX0XOwJGnVddt7VHgfURdqgOS-Q@mail.gmail.com/

* tag 'sched_urgent_for_v5.18_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/pelt: Fix attach_entity_load_avg() corner case

Pull powerpc fixes from Michael Ellerman:

 - Partly revert a change to our timer_interrupt() that caused lockups
   with high res timers disabled.

 - Fix a bug in KVM TCE handling that could corrupt kernel memory.

 - Two commits fixing Power9/Power10 perf alternative event selection.

Thanks to Alexey Kardashevskiy, Athira Rajeev, David Gibson, Frederic
Barrat, Madhavan Srinivasan, Miguel Ojeda, and Nicholas Piggin.

* tag 'powerpc-5.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/perf: Fix 32bit compile
  powerpc/perf: Fix power10 event alternatives
  powerpc/perf: Fix power9 event alternatives
  KVM: PPC: Fix TCE handling for VFIO
  powerpc/time: Always set decrementer in timer_interrupt()

Pull perf fixes from Borislav Petkov:

 - Add Sapphire Rapids CPU support

 - Fix a perf vmalloc-ed buffer mapping error (PERF_USE_VMALLOC in use)

* tag 'perf_urgent_for_v5.18_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/cstate: Add SAPPHIRERAPIDS_X CPU support
  perf/core: Fix perf_mmap fail when CONFIG_PERF_USE_VMALLOC enabled

Pull EDAC fix from Borislav Petkov:

 - Read the reported error count from the proper register on
   synopsys_edac

* tag 'edac_urgent_for_v5.18_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
  EDAC/synopsys: Read the error count from the correct register

Since commit 559089e0 ("vmalloc: replace VM_NO_HUGE_VMAP with
VM_ALLOW_HUGE_VMAP"), the use of hugepage mappings for vmalloc is an
opt-in strategy, because it caused a number of problems that weren't
noticed until x86 enabled it too.

One of the issues was fixed by Nick Piggin in commit 3b8000ae
("mm/vmalloc: huge vmalloc backing pages should be split rather than
compound"), but I'm still worried about page protection issues, and
VM_FLUSH_RESET_PERMS in particular.

However, like the hash table allocation case (commit f2edd118:
"page_alloc: use vmalloc_huge for large system hash"), the use of
kvmalloc() should be safe from any such games, since the returned
pointer might be a SLUB allocation, and as such no user should
reasonably be using it in any odd ways.

We also know that the allocations are fairly large, since it falls back
to the vmalloc case only when a kmalloc() fails.  So using a hugepage
mapping seems both safe and relevant.

This patch does show a weakness in the opt-in strategy: since the opt-in
flag is in the 'vm_flags', not the usual gfp_t allocation flags, very
few of the usual interfaces actually expose it.

That's not much of an issue in this case that already used one of the
fairly specialized low-level vmalloc interfaces for the allocation, but
for a lot of other vmalloc() users that might want to opt in, it's going
to be very inconvenient.

We'll either have to fix any compatibility problems, or expose it in the
gfp flags (__GFP_COMP would have made a lot of sense) to allow normal
vmalloc() users to use hugepage mappings.  That said, the cases that
really matter were probably already taken care of by the hash tabel
allocation.

Link: https://lore.kernel.org/all/20220415164413.2727220-1-song@kernel.org/
Link: https://lore.kernel.org/all/CAHk-=whao=iosX1s5Z4SF-ZGa-ebAukJoAdUJFk5SPwnofV+Vg@mail.gmail.com/
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Paul Menzel <pmenzel@molgen.mpg.de>
Cc: Song Liu <songliubraving@fb.com>
Cc: Rick Edgecombe <rick.p.edgecombe@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Use vmalloc_huge() in alloc_large_system_hash() so that large system
hash (>= PMD_SIZE) could benefit from huge pages.

Note that vmalloc_huge only allocates huge pages for systems with
HAVE_ARCH_HUGE_VMALLOC.
Signed-off-by: Song Liu <song@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Rik van Riel <riel@surriel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull ksmbd server fixes from Steve French:

 - cap maximum sector size reported to avoid mount problems

 - reference count fix

 - fix filename rename race

* tag '5.18-rc3-ksmbd-fixes' of git://git.samba.org/ksmbd:
  ksmbd: set fixed sector size to FS_SECTOR_SIZE_INFORMATION
  ksmbd: increment reference count of parent fp
  ksmbd: remove filename in ksmbd_file

Pull ARC fixes from Vineet Gupta:

 - Assorted fixes

* tag 'arc-5.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  ARC: remove redundant READ_ONCE() in cmpxchg loop
  ARC: atomic: cleanup atomic-llsc definitions
  arc: drop definitions of pgd_index() and pgd_offset{, _k}() entirely
  ARC: dts: align SPI NOR node name with dtschema
  ARC: Remove a redundant memset()
  ARC: fix typos in comments
  ARC: entry: fix syscall_trace_exit argument

Pull SCSI fix from James Bottomley:
 "One fix for an information leak caused by copying a buffer to
  userspace without checking for error first in the sr driver"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: sr: Do not leak information in ioctl

Pull xen fixes from Juergen Gross:
 "A simple cleanup patch and a refcount fix for Xen on Arm"

* tag 'for-linus-5.18-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  arm/xen: Fix some refcount leaks
  xen: Convert kmap() to kmap_local_page()

Pull more drm fixes from Dave Airlie:
 "Maarten was away, so Maxine stepped up and sent me the drm-fixes
  merge, so no point leaving it for another week.

  The big change is an OF revert around bridge/panels, it may have some
  driver fallout, but hopefully this revert gets them shook out in the
  next week easier.

  Otherwise it's a bunch of locking/refcounts across drivers, a radeon
  dma_resv logic fix and some raspberry pi panel fixes.

  panel:
   - revert of patch that broke panel/bridge issues

  dma-buf:
   - remove unused header file.

  amdgpu:
   - partial revert of locking change

  radeon:
   - fix dma_resv logic inversion

  panel:
   - pi touchscreen panel init fixes

  vc4:
   - build fix
   - runtime pm refcount fix

  vmwgfx:
   - refcounting fix"

* tag 'drm-fixes-2022-04-23' of git://anongit.freedesktop.org/drm/drm:
  drm/amdgpu: partial revert "remove ctx->lock" v2
  Revert "drm: of: Lookup if child node has panel or bridge"
  Revert "drm: of: Properly try all possible cases for bridge/panel detection"
  drm/vc4: Use pm_runtime_resume_and_get to fix pm_runtime_get_sync() usage
  drm/vmwgfx: Fix gem refcounting and memory evictions
  drm/vc4: Fix build error when CONFIG_DRM_VC4=y && CONFIG_RASPBERRYPI_FIRMWARE=m
  drm/panel/raspberrypi-touchscreen: Initialise the bridge in prepare
  drm/panel/raspberrypi-touchscreen: Avoid NULL deref if not initialised
  dma-buf-map: remove renamed header file
  drm/radeon: fix logic inversion in radeon_sync_resv

Pull input fixes from Dmitry Torokhov:

 - a new set of keycodes to be used by marine navigation systems

 - minor fixes to omap4-keypad and cypress-sf drivers

* tag 'input-for-v5.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: add Marine Navigation Keycodes
  Input: omap4-keypad - fix pm_runtime_get_sync() error checking
  Input: cypress-sf - register a callback to disable the regulators

Pull block fixes from Jens Axboe:
 "Just two small regression fixes for bcache"

* tag 'block-5.18-2022-04-22' of git://git.kernel.dk/linux-block:
  bcache: fix wrong bdev parameter when calling bio_alloc_clone() in do_bio_hook()
  bcache: put bch_bio_map() back to correct location in journal_write_unlocked()

Pull io_uring fixes from Jens Axboe:
 "Just two small fixes - one fixing a potential leak for the iovec for
  larger requests added in this cycle, and one fixing a theoretical leak
  with CQE_SKIP and IOPOLL"

* tag 'io_uring-5.18-2022-04-22' of git://git.kernel.dk/linux-block:
  io_uring: fix leaks on IOPOLL and CQE_SKIP
  io_uring: free iovec if file assignment fails

Merge tag 'perf-tools-fixes-for-v5.18-2022-04-22' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull perf tools fixes from Arnaldo Carvalho de Melo:

 - Fix header include for LLVM >= 14 when building with libclang.

 - Allow access to 'data_src' for auxtrace in 'perf script' with ARM SPE
   perf.data files, fixing processing data with such attributes.

 - Fix error message for test case 71 ("Convert perf time to TSC") on
   s390, where it is not supported.

* tag 'perf-tools-fixes-for-v5.18-2022-04-22' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
  perf test: Fix error message for test case 71 on s390, where it is not supported
  perf report: Set PERF_SAMPLE_DATA_SRC bit for Arm SPE event
  perf script: Always allow field 'data_src' for auxtrace
  perf clang: Fix header include for LLVM >= 14

Add a struct page forward declaration to cacheflush_32.h.
Fixes this build warning:

    CC      drivers/crypto/xilinx/zynqmp-sha.o
  In file included from arch/sparc/include/asm/cacheflush.h:11,
                   from include/linux/cacheflush.h:5,
                   from drivers/crypto/xilinx/zynqmp-sha.c:6:
  arch/sparc/include/asm/cacheflush_32.h:38:37: warning: 'struct page' declared inside parameter list will not be visible outside of this definition or declaration
     38 | void sparc_flush_page_to_ram(struct page *page);

Exposed by commit 0e03b8fd ("crypto: xilinx - Turn SHA into a
tristate and allow COMPILE_TEST") but not Fixes: that commit because the
underlying problem is older.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: David S. Miller <davem@davemloft.net>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: sparclinux@vger.kernel.org
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Two fixes for the raspberrypi panel initialisation, one fix for a logic
inversion in radeon, a build and pm refcounting fix for vc4, two reverts
for drm_of_get_bridge that caused a number of regression and a locking
regression for amdgpu.
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220422084403.2xrhf3jusdej5yo4@houat

Pull ext4 fixes from Ted Ts'o:
 "Fix some syzbot-detected bugs, as well as other bugs found by I/O
  injection testing.

  Change ext4's fallocate to consistently drop set[ug]id bits when an
  fallocate operation might possibly change the user-visible contents of
  a file.

  Also, improve handling of potentially invalid values in the the
  s_overhead_cluster superblock field to avoid ext4 returning a negative
  number of free blocks"

* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  jbd2: fix a potential race while discarding reserved buffers after an abort
  ext4: update the cached overhead value in the superblock
  ext4: force overhead calculation if the s_overhead_cluster makes no sense
  ext4: fix overhead calculation to account for the reserved gdt blocks
  ext4, doc: fix incorrect h_reserved size
  ext4: limit length to bitmap_maxbytes - blocksize in punch_hole
  ext4: fix use-after-free in ext4_search_dir
  ext4: fix bug_on in start_this_handle during umount filesystem
  ext4: fix symlink file size not match to file content
  ext4: fix fallocate to use file_modified to update permissions consistently

Pull ATA fix from Damien Le Moal:
 "A single fix to avoid a NULL pointer dereference in the pata_marvell
  driver with adapters not supporting DMA, from Zheyu"

* tag 'ata-5.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
  ata: pata_marvell: Check the 'bmdma_addr' beforing reading

Pull kvm fixes from Paolo Bonzini:
 "The main and larger change here is a workaround for AMD's lack of
  cache coherency for encrypted-memory guests.

  I have another patch pending, but it's waiting for review from the
  architecture maintainers.

  RISC-V:

   - Remove 's' & 'u' as valid ISA extension

   - Do not allow disabling the base extensions 'i'/'m'/'a'/'c'

  x86:

   - Fix NMI watchdog in guests on AMD

   - Fix for SEV cache incoherency issues

   - Don't re-acquire SRCU lock in complete_emulated_io()

   - Avoid NULL pointer deref if VM creation fails

   - Fix race conditions between APICv disabling and vCPU creation

   - Bugfixes for disabling of APICv

   - Preserve BSP MSR_KVM_POLL_CONTROL across suspend/resume

  selftests:

   - Do not use bitfields larger than 32-bits, they differ between GCC
     and clang"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  kvm: selftests: introduce and use more page size-related constants
  kvm: selftests: do not use bitfields larger than 32-bits for PTEs
  KVM: SEV: add cache flush to solve SEV cache incoherency issues
  KVM: SVM: Flush when freeing encrypted pages even on SME_COHERENT CPUs
  KVM: SVM: Simplify and harden helper to flush SEV guest page(s)
  KVM: selftests: Silence compiler warning in the kvm_page_table_test
  KVM: x86/pmu: Update AMD PMC sample period to fix guest NMI-watchdog
  x86/kvm: Preserve BSP MSR_KVM_POLL_CONTROL across suspend/resume
  KVM: SPDX style and spelling fixes
  KVM: x86: Skip KVM_GUESTDBG_BLOCKIRQ APICv update if APICv is disabled
  KVM: x86: Pend KVM_REQ_APICV_UPDATE during vCPU creation to fix a race
  KVM: nVMX: Defer APICv updates while L2 is active until L1 is active
  KVM: x86: Tag APICv DISABLE inhibit, not ABSENT, if APICv is disabled
  KVM: Initialize debugfs_dentry when a VM is created to avoid NULL deref
  KVM: Add helpers to wrap vcpu->srcu_idx and yell if it's abused
  KVM: RISC-V: Use kvm_vcpu.srcu_idx, drop RISC-V's unnecessary copy
  KVM: x86: Don't re-acquire SRCU lock in complete_emulated_io()
  RISC-V: KVM: Restrict the extensions that can be disabled
  RISC-V: KVM: Remove 's' & 'u' as valid ISA extension

Test case 71 'Convert perf time to TSC' is not supported on s390.

Subtest 71.1 is skipped with the correct message, but subtest 71.2 is
not skipped and fails.

The root cause is function evlist__open() called from
test__perf_time_to_tsc().  evlist__open() returns -ENOENT because the
event cycles:u is not supported by the selected PMU, for example
platform s390 on z/VM or an x86_64 virtual machine.

The PMU driver returns -ENOENT in this case. This error is leads to the
failure.

Fix this by returning TEST_SKIP on -ENOENT.

Output before:
 71: Convert perf time to TSC:
 71.1: TSC support:             Skip (This architecture does not support)
 71.2: Perf time to TSC:        FAILED!

Output after:
 71: Convert perf time to TSC:
 71.1: TSC support:             Skip (This architecture does not support)
 71.2: Perf time to TSC:        Skip (perf_read_tsc_conversion is not supported)

This also happens on an x86_64 virtual machine:
   # uname -m
   x86_64
   $ ./perf test -F 71
    71: Convert perf time to TSC  :
    71.1: TSC support             : Ok
    71.2: Perf time to TSC        : FAILED!
   $

Committer testing:

Continues to work on x86_64:

  $ perf test 71
   71: Convert perf time to TSC    :
   71.1: TSC support               : Ok
   71.2: Perf time to TSC          : Ok
  $

Fixes: 290fa68b ("perf test tsc: Fix error message when not supported")
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Chengdong Li <chengdongli@tencent.com>
Cc: chengdongli@tencent.com
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: https://lore.kernel.org/r/20220420062921.1211825-1-tmricht@linux.ibm.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Since commit bb30acae ("perf report: Bail out --mem-mode if mem
info is not available") "perf mem report" and "perf report --mem-mode"
don't report result if the PERF_SAMPLE_DATA_SRC bit is missed in sample
type.

The commit ffab4870 ("perf: arm-spe: Fix perf report
--mem-mode") partially fixes the issue.  It adds PERF_SAMPLE_DATA_SRC
bit for Arm SPE event, this allows the perf data file generated by
kernel v5.18-rc1 or later version can be reported properly.

On the other hand, perf tool still fails to be backward compatibility
for a data file recorded by an older version's perf which contains Arm
SPE trace data.  This patch is a workaround in reporting phase, when
detects ARM SPE PMU event and without PERF_SAMPLE_DATA_SRC bit, it will
force to set the bit in the sample type and give a warning info.

Fixes: bb30acae ("perf report: Bail out --mem-mode if mem info is not available")
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Tested-by: German Gomez <german.gomez@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Link: https://lore.kernel.org/r/20220414123201.842754-1-leo.yan@linaro.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

If use command 'perf script -F,+data_src' to dump memory samples with
Arm SPE trace data, it reports error:

  # perf script -F,+data_src
  Samples for 'dummy:u' event do not have DATA_SRC attribute set. Cannot print 'data_src' field.

This is because the 'dummy:u' event is absent DATA_SRC bit in its sample
type, so if a file contains AUX area tracing data then always allow
field 'data_src' to be selected as an option for perf script.

Fixes: e55ed342 ("perf arm-spe: Synthesize memory event")
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220417114837.839896-1-leo.yan@linaro.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The header TargetRegistry.h has moved in LLVM/clang 14.

Committer notes:

The problem as noticed when building in ubuntu:22.04:

    90    98.61 ubuntu:22.04                  : FAIL gcc version 11.2.0 (Ubuntu 11.2.0-19ubuntu1)
      util/c++/clang.cpp:23:10: fatal error: llvm/Support/TargetRegistry.h: No such file or directory
         23 | #include "llvm/Support/TargetRegistry.h"
            |          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
      compilation terminated.

Fixed after applying this patch.
Reported-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Guilherme Amadio <amadio@gentoo.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://twitter.com/GuilhermeAmadio/status/1514970524232921088
Link: http://lore.kernel.org/lkml/Ylp0M/VYgHOxtcnF@gentoo.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Commit 5467801f ("gpio: Restrict usage of GPIO chip irq members
before initialization") attempted to fix a race condition that lead to a
NULL pointer, but in the process caused a regression for _AEI/_EVT
declared GPIOs.

This manifests in messages showing deferred probing while trying to
allocate IRQs like so:

  amd_gpio AMDI0030:00: Failed to translate GPIO pin 0x0000 to IRQ, err -517
  amd_gpio AMDI0030:00: Failed to translate GPIO pin 0x002C to IRQ, err -517
  amd_gpio AMDI0030:00: Failed to translate GPIO pin 0x003D to IRQ, err -517
  [ .. more of the same .. ]

The code for walking _AEI doesn't handle deferred probing and so this
leads to non-functional GPIO interrupts.

Fix this issue by moving the call to `acpi_gpiochip_request_interrupts`
to occur after gc->irc.initialized is set.

Fixes: 5467801f ("gpio: Restrict usage of GPIO chip irq members before initialization")
Link: https://lore.kernel.org/linux-gpio/BL1PR12MB51577A77F000A008AA694675E2EF9@BL1PR12MB5157.namprd12.prod.outlook.com/
Link: https://bugzilla.suse.com/show_bug.cgi?id=1198697
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215850
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1979
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1976Reported-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Shreeya Patel <shreeya.patel@collabora.com>
Tested-By: Samuel Čavoj <samuel@cavoj.net>
Tested-By: lukeluk498@gmail.com Link:
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-and-tested-by: Takashi Iwai <tiwai@suse.de>
Cc: Shreeya Patel <shreeya.patel@collabora.com>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull RISC-V fixes Palmer Dabbelt:

 - A pair of build fixes for the recent cpuidle driver

 - A fix for systems without sv57 that manifests as a crash
   early in boot

* tag 'riscv-for-linus-5.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  RISC-V: cpuidle: fix Kconfig select for RISCV_SBI_CPUIDLE
  RISC-V: mm: Fix set_satp_mode() for platform not having Sv57
  cpuidle: riscv: support non-SMP config

Pull arm64 fixes from Will Deacon:
 "There's no real pattern to the fixes, but the main one fixes our
  pmd_leaf() definition to resolve a NULL dereference on the migration
  path.

   - Fix PMU event validation in the absence of any event counters

   - Fix allmodconfig build using clang in conjunction with binutils

   - Fix definitions of pXd_leaf() to handle PROT_NONE entries

   - More typo fixes"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: mm: fix p?d_leaf()
  arm64: fix typos in comments
  arm64: Improve HAVE_DYNAMIC_FTRACE_WITH_REGS selection for clang
  arm_pmu: Validate single/group leader events

The of_find_compatible_node() function returns a node pointer with
refcount incremented, We should use of_node_put() on it when done
Add the missing of_node_put() to release the refcount.

Fixes: 9b08aaa3 ("ARM: XEN: Move xen_early_init() before efi_init()")
Fixes: b2371587 ("arm/xen: Read extended regions from DT and init Xen resource")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com>

Pull xarray fixes from Matthew Wilcox:
 "Syzbot found a nasty race between large page splitting and page
  lookup. Details in the commit log, but fortunately it has a reliable
  reproducer. I thought it better to send this one to you straight away.

  Also fix the test suite build for kmem_cache_alloc_lru()"

* tag 'xarray-5.18a' of git://git.infradead.org/users/willy/xarray:
  XArray: Disallow sibling entries of nodes
  tools: Add kmem_cache_alloc_lru()

Pull cifs fixes from Steve French:
 "Four fixes, two of them for stable:

   - fcollapse fix

   - reconnect lock fix

   - DFS oops fix

   - minor cleanup patch"

* tag '5.18-rc3-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: destage any unwritten data to the server before calling copychunk_write
  cifs: use correct lock type in cifs_reconnect()
  cifs: fix NULL ptr dereference in refresh_mounts()
  cifs: Use kzalloc instead of kmalloc/memset

Pull mount_setattr fix from Christian Brauner:
 "The recent cleanup in e257039f ("mount_setattr(): clean the
  control flow and calling conventions") switched the mount attribute
  codepaths from do-while to for loops as they are more idiomatic when
  walking mounts.

  However, we did originally choose do-while constructs because if we
  request a mount or mount tree to be made read-only we need to hold
  writers in the following way: The mount attribute code will grab
  lock_mount_hash() and then call mnt_hold_writers() which will
  _unconditionally_ set MNT_WRITE_HOLD on the mount.

  Any callers that need write access have to call mnt_want_write(). They
  will immediately see that MNT_WRITE_HOLD is set on the mount and the
  caller will then either spin (on non-preempt-rt) or wait on
  lock_mount_hash() (on preempt-rt).

  The fact that MNT_WRITE_HOLD is set unconditionally means that once
  mnt_hold_writers() returns we need to _always_ pair it with
  mnt_unhold_writers() in both the failure and success paths.

  The do-while constructs did take care of this. But Al's change to a
  for loop in the failure path stops on the first mount we failed to
  change mount attributes _without_ going into the loop to call
  mnt_unhold_writers().

  This in turn means that once we failed to make a mount read-only via
  mount_setattr() - i.e. there are already writers on that mount - we
  will block any writers indefinitely. Fix this by ensuring that the for
  loop always unsets MNT_WRITE_HOLD including the first mount we failed
  to change to read-only. Also sprinkle a few comments into the cleanup
  code to remind people about what is happening including myself. After
  all, I didn't catch it during review.

  This is only relevant on mainline and was reported by syzbot. Details
  about the syzbot reports are all in the commit message"

* tag 'fs.fixes.v5.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
  fs: unset MNT_WRITE_HOLD on failure

Pull sound fixes from Takashi Iwai:
 "At this time, the majority of changes are for pending ASoC fixes while
  a few usual HD-audio and USB-audio quirks are found.

  Almost all patches are small device-specific fixes, and nothing
  worrisome stands out, so far"

* tag 'sound-5.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (37 commits)
  ALSA: hda/realtek: Add quirk for Clevo NP70PNP
  ALSA: hda: intel-dsp-config: Add RaptorLake PCI IDs
  ALSA: hda/realtek: Enable mute/micmute LEDs and limit mic boost on EliteBook 845/865 G9
  ALSA: usb-audio: Clear MIDI port active flag after draining
  ALSA: usb-audio: add mapping for MSI MAG X570S Torpedo MAX.
  ALSA: hda/i915: Fix one too many pci_dev_put()
  ALSA: hda/hdmi: add HDMI codec VID for Raptorlake-P
  ALSA: hda/hdmi: fix warning about PCM count when used with SOF
  sound/oss/dmasound: fix 'dmasound_setup' defined but not used
  firmware: cs_dsp: Fix overrun of unterminated control name string
  ASoC: codecs: Fix an error handling path in (rx|tx|va)_macro_probe()
  ASoC: Intel: sof_es8336: Add a quirk for Huawei Matebook D15
  ASoC: Intel: sof_es8336: add a quirk for headset at mic1 port
  ASoC: Intel: sof_es8336: support a separate gpio to control headphone
  ASoC: Intel: sof_es8336: simplify speaker gpio naming
  ASoC: wm8731: Disable the regulator when probing fails
  ASoC: Intel: soc-acpi: correct device endpoints for max98373
  ASoC: codecs: wcd934x: do not switch off SIDO Buck when codec is in use
  ASoC: SOF: topology: Fix memory leak in sof_control_load()
  ASoC: SOF: topology: cleanup dailinks on widget unload
  ...

There is a race between xas_split() and xas_load() which can result in
the wrong page being returned, and thus data corruption.  Fortunately,
it's hard to hit (syzbot took three months to find it) and often guarded
with VM_BUG_ON().

The anatomy of this race is:

thread A			thread B
order-9 page is stored at index 0x200
				lookup of page at index 0x274
page split starts
				load of sibling entry at offset 9
stores nodes at offsets 8-15
				load of entry at offset 8

The entry at offset 8 turns out to be a node, and so we descend into it,
and load the page at index 0x234 instead of 0x274.  This is hard to fix
on the split side; we could replace the entire node that contains the
order-9 page instead of replacing the eight entries.  Fixing it on
the lookup side is easier; just disallow sibling entries that point
to nodes.  This cannot ever be a useful thing as the descent would not
know the correct offset to use within the new node.

The test suite continues to pass, but I have not added a new test for
this bug.

Reported-by: syzbot+cf4cf13056f85dec2c40@syzkaller.appspotmail.com
Tested-by: syzbot+cf4cf13056f85dec2c40@syzkaller.appspotmail.com
Fixes: 6b24ca4a ("mm: Use multi-index entries in the page cache")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>

Turn kmem_cache_alloc() into a wrapper around kmem_cache_alloc_lru().

Fixes: 9bbdc0f3 ("xarray: use kmem_cache_alloc_lru to allocate xa_node")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reported-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reported-by: Li Wang <liwang@redhat.com>

Merge misc fixes from Andrew Morton:
 "13 patches.

  Subsystems affected by this patch series: mm (memory-failure, memcg,
  userfaultfd, hugetlbfs, mremap, oom-kill, kasan, hmm), and kcov"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  mm/mmu_notifier.c: fix race in mmu_interval_notifier_remove()
  kcov: don't generate a warning on vm_insert_page()'s failure
  MAINTAINERS: add Vincenzo Frascino to KASAN reviewers
  oom_kill.c: futex: delay the OOM reaper to allow time for proper futex cleanup
  selftest/vm: add skip support to mremap_test
  selftest/vm: support xfail in mremap_test
  selftest/vm: verify remap destination address in mremap_test
  selftest/vm: verify mmap addr in mremap_test
  mm, hugetlb: allow for "high" userspace addresses
  userfaultfd: mark uffd_wp regardless of VM_WRITE flag
  memcg: sync flush only if periodic flush is delayed
  mm/memory-failure.c: skip huge_zero_page in memory_failure()
  mm/hwpoison: fix race between hugetlb free/demotion and memory_failure_hugetlb()

Huge vmalloc higher-order backing pages were allocated with __GFP_COMP
in order to allow the sub-pages to be refcounted by callers such as
"remap_vmalloc_page [sic]" (remap_vmalloc_range).

However a similar problem exists for other struct page fields callers
use, for example fb_deferred_io_fault() takes a vmalloc'ed page and
not only refcounts it but uses ->lru, ->mapping, ->index.

This is not compatible with compound sub-pages, and can cause bad page
state issues like

  BUG: Bad page state in process swapper/0  pfn:00743
  page:(____ptrval____) refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x743
  flags: 0x7ffff000000000(node=0|zone=0|lastcpupid=0x7ffff)
  raw: 007ffff000000000 c00c00000001d0c8 c00c00000001d0c8 0000000000000000
  raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000
  page dumped because: corrupted mapping in tail page
  Modules linked in:
  CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.18.0-rc3-00082-gfc6fff4a7ce1-dirty #2810
  Call Trace:
    dump_stack_lvl+0x74/0xa8 (unreliable)
    bad_page+0x12c/0x170
    free_tail_pages_check+0xe8/0x190
    free_pcp_prepare+0x31c/0x4e0
    free_unref_page+0x40/0x1b0
    __vunmap+0x1d8/0x420
    ...

The correct approach is to use split high-order pages for the huge
vmalloc backing. These allow callers to treat them in exactly the same
way as individually-allocated order-0 pages.

Link: https://lore.kernel.org/all/14444103-d51b-0fb3-ee63-c3f182f0b546@molgen.mpg.de/Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Cc: Paul Menzel <pmenzel@molgen.mpg.de>
Cc: Song Liu <songliubraving@fb.com>
Cc: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The pmd_leaf() is used to test a leaf mapped PMD, however, it misses
the PROT_NONE mapped PMD on arm64.  Fix it.  A real world issue [1]
caused by this was reported by Qian Cai. Also fix pud_leaf().

Link: https://patchwork.kernel.org/comment/24798260/ [1]
Fixes: 8aa82df3 ("arm64: mm: add p?d_leaf() definitions")
Reported-by: Qian Cai <quic_qiancai@quicinc.com>
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Link: https://lore.kernel.org/r/20220422060033.48711-1-songmuchun@bytedance.comSigned-off-by: Will Deacon <will@kernel.org>

Pull drm fixes from Dave Airlie:
 "Extra quiet after Easter, only have minor i915 and msm pulls. However
  I haven't seen a PR from our misc tree in a little while, I've cc'ed
  all the suspects. Once that unblocks I expect a bit larger bunch of
  patches to arrive.

  Otherwise as I said, one msm revert and two i915 fixes.

  msm:

   - revert iommu change that broke some platforms.

  i915:

   - Unset enable_psr2_sel_fetch if PSR2 detection fails

   - Fix to detect when VRR is turned off from panel settings"

* tag 'drm-fixes-2022-04-22' of git://anongit.freedesktop.org/drm/drm:
  drm/i915/display/psr: Unset enable_psr2_sel_fetch if other checks in intel_psr2_config_valid() fails
  drm/msm: Revert "drm/msm: Stop using iommu_present()"
  drm/i915/display/vrr: Reset VRR capable property on a long hpd