- 07 Dec, 2018 5 commits
-
-
git://git.infradead.org/nvmeJens Axboe authored
Pull NVMe fixes from Christoph. * 'nvme-4.20' of git://git.infradead.org/nvme: nvmet-rdma: fix response use after free nvme: validate controller state before rescheduling keep alive
-
Jens Axboe authored
After the direct dispatch corruption fix, we permanently disallow direct dispatch of non read/write requests. This works fine off the normal IO path, as they will be retried like any other failed direct dispatch request. But for the blk_insert_cloned_request() that only DM uses to bypass the bottom level scheduler, we always first attempt direct dispatch. For some types of requests, that's now a permanent failure, and no amount of retrying will make that succeed. This results in a livelock. Instead of making special cases for what we can direct issue, and now having to deal with DM solving the livelock while still retaining a BUSY condition feedback loop, always just add a request that has been through ->queue_rq() to the hardware queue dispatch list. These are safe to use as no merging can take place there. Additionally, if requests do have prepped data from drivers, we aren't dependent on them not sharing space in the request structure to safely add them to the IO scheduler lists. This basically reverts ffe81d45 and is based on a patch from Ming, but with the list insert case covered as well. Fixes: ffe81d45 ("blk-mq: fix corruption with direct issue") Cc: stable@vger.kernel.org Suggested-by:
Ming Lei <ming.lei@redhat.com> Reported-by:
Bart Van Assche <bvanassche@acm.org> Tested-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk>
-
Israel Rukshin authored
nvmet_rdma_release_rsp() may free the response before using it at error flow. Fixes: 8407879c ("nvmet-rdma: fix possible bogus dereference under heavy load") Signed-off-by:
Israel Rukshin <israelr@mellanox.com> Reviewed-by:
Sagi Grimberg <sagi@grimberg.me> Reviewed-by:
Max Gurtovoy <maxg@mellanox.com> Signed-off-by:
Christoph Hellwig <hch@lst.de>
-
James Smart authored
Delete operations are seeing NULL pointer references in call_timer_fn. Tracking these back, the timer appears to be the keep alive timer. nvme_keep_alive_work() which is tied to the timer that is cancelled by nvme_stop_keep_alive(), simply starts the keep alive io but doesn't wait for it's completion. So nvme_stop_keep_alive() only stops a timer when it's pending. When a keep alive is in flight, there is no timer running and the nvme_stop_keep_alive() will have no affect on the keep alive io. Thus, if the io completes successfully, the keep alive timer will be rescheduled. In the failure case, delete is called, the controller state is changed, the nvme_stop_keep_alive() is called while the io is outstanding, and the delete path continues on. The keep alive happens to successfully complete before the delete paths mark it as aborted as part of the queue termination, so the timer is restarted. The delete paths then tear down the controller, and later on the timer code fires and the timer entry is now corrupt. Fix by validating the controller state before rescheduling the keep alive. Testing with the fix has confirmed the condition above was hit. Signed-off-by:
James Smart <jsmart2021@gmail.com> Reviewed-by:
-
Paolo Valente authored
Since commit '2d29c9f8 ("block, bfq: improve asymmetric scenarios detection")', if there are process groups with I/O requests waiting for completion, then BFQ tags the scenario as 'asymmetric'. This detection is needed for preserving service guarantees (for details, see comments on the computation * of the variable asymmetric_scenario in the function bfq_better_to_idle). Unfortunately, commit '2d29c9f8 ("block, bfq: improve asymmetric scenarios detection")' contains an error exactly in the updating of the number of groups with I/O requests waiting for completion: if a group has more than one descendant process, then the above number of groups, which is renamed from num_active_groups to a more appropriate num_groups_with_pending_reqs by this commit, may happen to be wrongly decremented multiple times, namely every time one of the descendant processes gets all its pending I/O requests completed. A correct, complete solution should work as follows. Consider a group that is inactive, i.e., that has no descendant process with pending I/O inside BFQ queues. Then suppose that num_groups_with_pending_reqs is still accounting for this group, because the group still has some descendant process with some I/O request still in flight. num_groups_with_pending_reqs should be decremented when the in-flight request of the last descendant process is finally completed (assuming that nothing else has changed for the group in the meantime, in terms of composition of the group and active/inactive state of child groups and processes). To accomplish this, an additional pending-request counter must be added to entities, and must be updated correctly. To avoid this additional field and operations, this commit resorts to the following tradeoff between simplicity and accuracy: for an inactive group that is still counted in num_groups_with_pending_reqs, this commit decrements num_groups_with_pending_reqs when the first descendant process of the group remains with no request waiting for completion. This simplified scheme provides a fix to the unbalanced decrements introduced by 2d29c9f8. Since this error was also caused by lack of comments on this non-trivial issue, this commit also adds related comments. Fixes: 2d29c9f8 ("block, bfq: improve asymmetric scenarios detection") Reported-by:
Steven Barrett <steven@liquorix.net> Tested-by:
Lucjan Lucjanov <lucjan.lucjanov@gmail.com> Reviewed-by:
Federico Motta <federico@willer.it> Signed-off-by:
Paolo Valente <paolo.valente@linaro.org> Signed-off-by:
-
- 05 Dec, 2018 1 commit
-
-
Jens Axboe authored
If we attempt a direct issue to a SCSI device, and it returns BUSY, then we queue the request up normally. However, the SCSI layer may have already setup SG tables etc for this particular command. If we later merge with this request, then the old tables are no longer valid. Once we issue the IO, we only read/write the original part of the request, not the new state of it. This causes data corruption, and is most often noticed with the file system complaining about the just read data being invalid: [ 235.934465] EXT4-fs error (device sda1): ext4_iget:4831: inode #7142: comm dpkg-query: bad extra_isize 24937 (inode size 256) because most of it is garbage... This doesn't happen from the normal issue path, as we will simply defer the request to the hardware queue dispatch list if we fail. Once it's on the dispatch list, we never merge with it. Fix this from the direct issue path by flagging the request as REQ_NOMERGE so we don't change the size of it before issue. See also: https://bugzilla.kernel.org/show_bug.cgi?id=201685Tested-by:
Guenter Roeck <linux@roeck-us.net> Fixes: 6ce3dd6e ("blk-mq: issue directly if hw queue isn't busy in case of 'none'") Cc: stable@vger.kernel.org Signed-off-by:
-
- 03 Dec, 2018 1 commit
-
-
Juha-Matti Tilli authored
These devices support read zero after trim (RZAT), as they advertise to the OS. However, the OS doesn't believe the SSDs unless they are explicitly whitelisted. Acked-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
Juha-Matti Tilli <juha-matti.tilli@iki.fi> Signed-off-by:
-
- 30 Nov, 2018 6 commits
-
-
git://git.infradead.org/nvmeJens Axboe authored
Pull NVMe fixes from Christoph: "Various fixlets all over." * 'nvme-4.20' of git://git.infradead.org/nvme: nvme-rdma: fix double freeing of async event data nvme: flush namespace scanning work just before removing namespaces nvme: warn when finding multi-port subsystems without multipathing enabled nvme-pci: fix surprise removal nvme-fc: initialize nvme_req(rq)->ctrl after calling __nvme_fc_init_request() nvme: Free ctrl device name on init failure
-
Ming Lei authored
There are actually two kinds of discard merge: - one is the normal discard merge, just like normal read/write request, and call it single-range discard - another is the multi-range discard, queue_max_discard_segments(rq->q) > 1 For the former case, queue_max_discard_segments(rq->q) is 1, and we should handle this kind of discard merge like the normal read/write request. This patch fixes the following kernel panic issue[1], which is caused by not removing the single-range discard request from elevator queue. Guangwu has one raid discard test case, in which this issue is a bit easier to trigger, and I verified that this patch can fix the kernel panic issue in Guangwu's test case. [1] kernel panic log from Jens's report BUG: unable to handle kernel NULL pointer dereference at 0000000000000148 PGD 0 P4D 0. Oops: 0000 [#1] SMP PTI CPU: 37 PID: 763 Comm: kworker/37:1H Not tainted \ 4.20.0-rc3-00649-ge64d9a554a91-dirty #14 Hardware name: Wiwynn \ Leopard-Orv2/Leopard-DDR BW, BIOS LBM08 03/03/2017 Workqueue: kblockd \ blk_mq_run_work_fn RIP: \ 0010:blk_mq_get_driver_tag+0x81/0x120 Code: 24 \ 10 48 89 7c 24 20 74 21 83 fa ff 0f 95 c0 48 8b 4c 24 28 65 48 33 0c 25 28 00 00 00 \ 0f 85 96 00 00 00 48 83 c4 30 5b 5d c3 <48> 8b 87 48 01 00 00 8b 40 04 39 43 20 72 37 \ f6 87 b0 00 00 00 02 RSP: 0018:ffffc90004aabd30 EFLAGS: 00010246 \ RAX: 0000000000000003 RBX: ffff888465ea1300 RCX: ffffc90004aabde8 RDX: 00000000ffffffff RSI: ffffc90004aabde8 RDI: 0000000000000000 RBP: 0000000000000000 R08: ffff888465ea1348 R09: 0000000000000000 R10: 0000000000001000 R11: 00000000ffffffff R12: ffff888465ea1300 R13: 0000000000000000 R14: ffff888465ea1348 R15: ffff888465d10000 FS: 0000000000000000(0000) GS:ffff88846f9c0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000148 CR3: 000000000220a003 CR4: 00000000003606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: blk_mq_dispatch_rq_list+0xec/0x480 ? elv_rb_del+0x11/0x30 blk_mq_do_dispatch_sched+0x6e/0xf0 blk_mq_sched_dispatch_requests+0xfa/0x170 __blk_mq_run_hw_queue+0x5f/0xe0 process_one_work+0x154/0x350 worker_thread+0x46/0x3c0 kthread+0xf5/0x130 ? process_one_work+0x350/0x350 ? kthread_destroy_worker+0x50/0x50 ret_from_fork+0x1f/0x30 Modules linked in: sb_edac x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel \ kvm switchtec irqbypass iTCO_wdt iTCO_vendor_support efivars cdc_ether usbnet mii \ cdc_acm i2c_i801 lpc_ich mfd_core ipmi_si ipmi_devintf ipmi_msghandler acpi_cpufreq \ button sch_fq_codel nfsd nfs_acl lockd grace auth_rpcgss oid_registry sunrpc nvme \ nvme_core fuse sg loop efivarfs autofs4 CR2: 0000000000000148 \ ---[ end trace 340a1fb996df1b9b ]--- RIP: 0010:blk_mq_get_driver_tag+0x81/0x120 Code: 24 10 48 89 7c 24 20 74 21 83 fa ff 0f 95 c0 48 8b 4c 24 28 65 48 33 0c 25 28 \ 00 00 00 0f 85 96 00 00 00 48 83 c4 30 5b 5d c3 <48> 8b 87 48 01 00 00 8b 40 04 39 43 \ 20 72 37 f6 87 b0 00 00 00 02 Fixes: 445251d0 ("blk-mq: fix discard merge with scheduler attached") Reported-by:
-
Prabhath Sajeepa authored
Some error paths in configuration of admin queue free data buffer associated with async request SQE without resetting the data buffer pointer to NULL, This buffer is also freed up again if the controller is shutdown or reset. Signed-off-by:
Prabhath Sajeepa <psajeepa@purestorage.com> Reviewed-by:
Roland Dreier <roland@purestorage.com> Signed-off-by:
-
Sagi Grimberg authored
nvme_stop_ctrl can be called also for reset flow and there is no need to flush the scan_work as namespaces are not being removed. This can cause deadlock in rdma, fc and loop drivers since nvme_stop_ctrl barriers before controller teardown (and specifically I/O cancellation of the scan_work itself) takes place, but the scan_work will be blocked anyways so there is no need to flush it. Instead, move scan_work flush to nvme_remove_namespaces() where it really needs to flush. Reported-by:
Keith Busch <keith.busch@intel.com> Reviewed by: James Smart <jsmart2021@gmail.com> Tested-by:
Ewan D. Milne <emilne@redhat.com> Signed-off-by:
-
Christoph Hellwig authored
Without CONFIG_NVME_MULTIPATH enabled a multi-port subsystem might show up as invididual devices and cause problems, warn about it. Signed-off-by:
-
Maximilian Heyne authored
commit e2592217 ("fs: simplify the generic_write_sync prototype") reworked callers of generic_write_sync(), and ended up dropping the error return for the directio path. Prior to that commit, in dio_complete(), an error would be bubbled up the stack, but after that commit, errors passed on to dio_complete were eaten up. This was reported on the list earlier, and a fix was proposed in https://lore.kernel.org/lkml/20160921141539.GA17898@infradead.org/, but never followed up with. We recently hit this bug in our testing where fencing io errors, which were previously erroring out with EIO, were being returned as success operations after this commit. The fix proposed on the list earlier was a little short -- it would have still called generic_write_sync() in case `ret` already contained an error. This fix ensures generic_write_sync() is only called when there's no pending error in the write. Additionally, transferred is replaced with ret to bring this code in line with other callers. Fixes: e2592217 ("fs: simplify the generic_write_sync prototype") Reported-by:
Ravi Nankani <rnankani@amazon.com> Signed-off-by:
Maximilian Heyne <mheyne@amazon.de> Reviewed-by:
-
- 27 Nov, 2018 3 commits
-
-
Igor Konopko authored
When a PCIe NVMe device is not present, nvme_dev_remove_admin() calls blk_cleanup_queue() on the admin queue, which frees the hctx for that queue. Moments later, on the same path nvme_kill_queues() calls blk_mq_unquiesce_queue() on admin queue and tries to access hctx of it, which leads to following OOPS: Oops: 0000 [#1] SMP PTI RIP: 0010:sbitmap_any_bit_set+0xb/0x40 Call Trace: blk_mq_run_hw_queue+0xd5/0x150 blk_mq_run_hw_queues+0x3a/0x50 nvme_kill_queues+0x26/0x50 nvme_remove_namespaces+0xb2/0xc0 nvme_remove+0x60/0x140 pci_device_remove+0x3b/0xb0 Fixes: cb4bfda6 ("nvme-pci: fix hot removal during error handling") Signed-off-by:
Igor Konopko <igor.j.konopko@intel.com> Reviewed-by:
-
Ewan D. Milne authored
__nvme_fc_init_request() invokes memset() on the nvme_fcp_op_w_sgl structure, which NULLed-out the nvme_req(req)->ctrl field previously set by nvme_fc_init_request(). This apparently was not referenced until commit faf4a44fff ("nvme: support traffic based keep-alive") which now results in a crash in nvme_complete_rq(): [ 8386.897130] RIP: 0010:panic+0x220/0x26c [ 8386.901406] Code: 83 3d 6f ee 72 01 00 74 05 e8 e8 54 02 00 48 c7 c6 40 fd 5b b4 48 c7 c7 d8 8d c6 b3 31e [ 8386.922359] RSP: 0018:ffff99650019fc40 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13 [ 8386.930804] RAX: 0000000000000046 RBX: 0000000000000000 RCX: 0000000000000006 [ 8386.938764] RDX: 0000000000000000 RSI: 0000000000000082 RDI: ffff8e325f8168b0 [ 8386.946725] RBP: ffff99650019fcb0 R08: 0000000000000000 R09: 00000000000004f8 [ 8386.954687] R10: 0000000000000000 R11: ffff99650019f9b8 R12: ffffffffb3c55f3c [ 8386.962648] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000001 [ 8386.970613] oops_end+0xd1/0xe0 [ 8386.974116] no_context+0x1b2/0x3c0 [ 8386.978006] do_page_fault+0x32/0x140 [ 8386.982090] page_fault+0x1e/0x30 [ 8386.985786] RIP: 0010:nvme_complete_rq+0x65/0x1d0 [nvme_core] [ 8386.992195] Code: 41 bc 03 00 00 00 74 16 0f 86 c3 00 00 00 66 3d 83 00 41 bc 06 00 00 00 0f 85 e7 00 000 [ 8387.013147] RSP: 0018:ffff99650019fe18 EFLAGS: 00010246 [ 8387.018973] RAX: 0000000000000000 RBX: ffff8e322ae51280 RCX: 0000000000000001 [ 8387.026935] RDX: 0000000000000400 RSI: 0000000000000001 RDI: ffff8e322ae51280 [ 8387.034897] RBP: ffff8e322ae51280 R08: 0000000000000000 R09: ffffffffb2f0b890 [ 8387.042859] R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000 [ 8387.050821] R13: 0000000000000100 R14: 0000000000000004 R15: ffff8e2b0446d990 [ 8387.058782] ? swiotlb_unmap_page+0x40/0x40 [ 8387.063448] nvme_fc_complete_rq+0x2d/0x70 [nvme_fc] [ 8387.068986] blk_done_softirq+0xa1/0xd0 [ 8387.073264] __do_softirq+0xd6/0x2a9 [ 8387.077251] run_ksoftirqd+0x26/0x40 [ 8387.081238] smpboot_thread_fn+0x10e/0x160 [ 8387.085807] kthread+0xf8/0x130 [ 8387.089309] ? sort_range+0x20/0x20 [ 8387.093198] ? kthread_stop+0x110/0x110 [ 8387.097475] ret_from_fork+0x35/0x40 [ 8387.101462] ---[ end trace 7106b0adf5e422f8 ]--- Fixes: faf4a44fff ("nvme: support traffic based keep-alive") Signed-off-by:Hannes Reinecke <hare@suse.com> Signed-off-by:
-
Keith Busch authored
Free the kobject name that was allocated for the controller device on failure rather than its parent. Fixes: d22524a4 ("nvme: switch controller refcounting to use struct device") Signed-off-by:
-
- 21 Nov, 2018 1 commit
-
-
git://git.infradead.org/nvmeJens Axboe authored
Pull NVMe fix from Christoph. * 'nvme-4.20' of git://git.infradead.org/nvme: nvme-fc: resolve io failures during connect
-
- 15 Nov, 2018 1 commit
-
-
James Smart authored
If an io error occurs on an io issued while connecting, recovery of the io falls flat as the state checking ends up nooping the error handler. Create an err_work work item that is scheduled upon an io error while connecting. The work thread terminates all io on all queues and marks the queues as not connected. The termination of the io will return back to the callee, which will then back out of the connection attempt and will reschedule, if possible, the connection attempt. The changes: - in case there are several commands hitting the error handler, a state flag is kept so that the error work is only scheduled once, on the first error. The subsequent errors can be ignored. - The calling sequence to stop keep alive and terminate the queues and their io is lifted from the reset routine. Made a small service routine used by both reset and err_work. - During debugging, found that the teardown path can reference an uninitialized pointer, resulting in a NULL pointer oops. The aen_ops weren't initialized yet. Add validation on their initialization before calling the teardown routine. Signed-off-by:
-
- 14 Nov, 2018 2 commits
-
-
Ming Lei authored
c2856ae2 ("blk-mq: quiesce queue before freeing queue") has already fixed this race, however the implied synchronize_rcu() in blk_mq_quiesce_queue() can slow down LUN probe a lot, so caused performance regression. Then 1311326c ("blk-mq: avoid to synchronize rcu inside blk_cleanup_queue()") tried to quiesce queue for avoiding unnecessary synchronize_rcu() only when queue initialization is done, because it is usual to see lots of inexistent LUNs which need to be probed. However, turns out it isn't safe to quiesce queue only when queue initialization is done. Because when one SCSI command is completed, the user of sending command can be waken up immediately, then the scsi device may be removed, meantime the run queue in scsi_end_request() is still in-progress, so kernel panic can be caused. In Red Hat QE lab, there are several reports about this kind of kernel panic triggered during kernel booting. This patch tries to address the issue by grabing one queue usage counter during freeing one request and the following run queue. Fixes: 1311326c ("blk-mq: avoid to synchronize rcu inside blk_cleanup_queue()") Cc: Andrew Jones <drjones@redhat.com> Cc: Bart Van Assche <bart.vanassche@wdc.com> Cc: linux-scsi@vger.kernel.org Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Christoph Hellwig <hch@lst.de> Cc: James E.J. Bottomley <jejb@linux.vnet.ibm.com> Cc: stable <stable@vger.kernel.org> Cc: jianchao.wang <jianchao.w.wang@oracle.com> Signed-off-by:
-
Dave Chinner authored
A discard cleanup merged into 4.20-rc2 causes fstests xfs/259 to fall into an endless loop in the discard code. The test is creating a device that is exactly 2^32 sectors in size to test mkfs boundary conditions around the 32 bit sector overflow region. mkfs issues a discard for the entire device size by default, and hence this throws a sector count of 2^32 into blkdev_issue_discard(). It takes the number of sectors to discard as a sector_t - a 64 bit value. The commit ba5d7385 ("block: cleanup __blkdev_issue_discard") takes this sector count and casts it to a 32 bit value before comapring it against the maximum allowed discard size the device has. This truncates away the upper 32 bits, and so if the lower 32 bits of the sector count is zero, it starts issuing discards of length 0. This causes the code to fall into an endless loop, issuing a zero length discards over and over again on the same sector. Fixes: ba5d7385 ("block: cleanup __blkdev_issue_discard") Tested-by:
Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by:
Dave Chinner <dchinner@redhat.com> Killed pointless WARN_ON(). Signed-off-by:
-
- 12 Nov, 2018 3 commits
-
-
Diego Viola authored
med_power_with_dipm still causes freezes after updating the firmware to the latest version (DXT04L5Q). Set model_rev to NULL and blacklist the device. Cc: stable@vger.kernel.org Signed-off-by:
Diego Viola <diego.viola@gmail.com> Reviewed-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Hannes Reinecke authored
We need to copy the io priority, too; otherwise the clone will run with a different priority than the original one. Fixes: 43b62ce3 ("block: move bio io prio to a new field") Signed-off-by:
Jean Delvare <jdelvare@suse.de> Fixed up subject, and ordered stores. Signed-off-by:
-
Omar Sandoval authored
When copying to the latency type, we should be passing LATENCY_TYPE_LEN, not DOMAIN_LEN (this isn't a problem in practice because we only pass "total" or "I/O"). Fix it by changing all of the strlcpy() calls to use sizeof(). Fixes: 6c3b7af1 ("kyber: add tracepoints") Reported-by:
Jordan Glover <Golden_Miller83@protonmail.ch> Tested-by:
Omar Sandoval <osandov@fb.com> Signed-off-by:
-
- 10 Nov, 2018 1 commit
-
-
Jens Axboe authored
LKP recently reported a hang at bootup in the floppy code: [ 245.678853] INFO: task mount:580 blocked for more than 120 seconds. [ 245.679906] Tainted: G T 4.19.0-rc6-00172-ga9f38e1d #1 [ 245.680959] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 245.682181] mount D 6372 580 1 0x00000004 [ 245.683023] Call Trace: [ 245.683425] __schedule+0x2df/0x570 [ 245.683975] schedule+0x2d/0x80 [ 245.684476] schedule_timeout+0x19d/0x330 [ 245.685090] ? wait_for_common+0xa5/0x170 [ 245.685735] wait_for_common+0xac/0x170 [ 245.686339] ? do_sched_yield+0x90/0x90 [ 245.686935] wait_for_completion+0x12/0x20 [ 245.687571] __floppy_read_block_0+0xfb/0x150 [ 245.688244] ? floppy_resume+0x40/0x40 [ 245.688844] floppy_revalidate+0x20f/0x240 [ 245.689486] check_disk_change+0x43/0x60 [ 245.690087] floppy_open+0x1ea/0x360 [ 245.690653] __blkdev_get+0xb4/0x4d0 [ 245.691212] ? blkdev_get+0x1db/0x370 [ 245.691777] blkdev_get+0x1f3/0x370 [ 245.692351] ? path_put+0x15/0x20 [ 245.692871] ? lookup_bdev+0x4b/0x90 [ 245.693539] blkdev_get_by_path+0x3d/0x80 [ 245.694165] mount_bdev+0x2a/0x190 [ 245.694695] squashfs_mount+0x10/0x20 [ 245.695271] ? squashfs_alloc_inode+0x30/0x30 [ 245.695960] mount_fs+0xf/0x90 [ 245.696451] vfs_kern_mount+0x43/0x130 [ 245.697036] do_mount+0x187/0xc40 [ 245.697563] ? memdup_user+0x28/0x50 [ 245.698124] ksys_mount+0x60/0xc0 [ 245.698639] sys_mount+0x19/0x20 [ 245.699167] do_int80_syscall_32+0x61/0x130 [ 245.699813] entry_INT80_32+0xc7/0xc7 showing that we never complete that read request. The reason is that the completion setup is racy - it initializes the completion event AFTER submitting the IO, which means that the IO could complete before/during the init. If it does, we are passing garbage to complete() and we may sleep forever waiting for the event to occur. Fixes: 7b7b68bb ("floppy: bail out in open() if drive is not responding to block0 read") Reviewed-by:
-
- 09 Nov, 2018 10 commits
-
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block layer fixes from Jens Axboe: - Two fixes for an ubd regression, one for missing locking, and one for a missing initialization of a field. The latter was an old latent bug, but it's now visible and triggers (Me, Anton Ivanov) - Set of NVMe fixes via Christoph, but applied manually due to a git tree mixup (Christoph, Sagi) - Fix for a discard split regression, in three patches (Ming) - Update libata git trees (Geert) - SPDX identifier for sata_rcar (Kuninori Morimoto) - Virtual boundary merge fix (Johannes) - Preemptively clear memory we are going to pass to userspace, in case the driver does a short read (Keith) * tag 'for-linus-20181109' of git://git.kernel.dk/linux-block: block: make sure writesame bio is aligned with logical block size block: cleanup __blkdev_issue_discard() block: make sure discard bio is aligned with logical block size Revert "nvmet-rdma: use a private workqueue for delete" nvme: make sure ns head inherits underlying device limits nvmet: don't try to add ns to p2p map unless it actually uses it sata_rcar: convert to SPDX identifiers ubd: fix missing initialization of io_req block: Clear kernel memory before copying to user MAINTAINERS: Fix remaining pointers to obsolete libata.git ubd: fix missing lock around request issue block: respect virtual boundary mask in bvecs
-
https://github.com/ceph/ceph-clientLinus Torvalds authored
Pull Ceph fixes from Ilya Dryomov: "Two CephFS fixes (copy_file_range and quota) and a small feature bit cleanup" * tag 'ceph-for-4.20-rc2' of https://github.com/ceph/ceph-client: libceph: assume argonaut on the server side ceph: quota: fix null pointer dereference in quota check ceph: add destination file data sync before doing any remote copy
-
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linuxLinus Torvalds authored
Pull MIPS fixes from Paul Burton: "A couple of small MIPS fixes for 4.20: - Extend an array to avoid overruns on some Octeon hardware, fixing a bug introduced in 4.3. - Fix a coherent DMA regression for systems without cache-coherent DMA introduced in the 4.20 merge window" * tag 'mips_fixes_4.20_2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: Fix `dma_alloc_coherent' returning a non-coherent allocation MIPS: OCTEON: fix out of bounds array access on CN68XX -
Ming Lei authored
Obviously the created writesame bio has to be aligned with logical block size, and use bio_allowed_max_sectors() to retrieve this number. Cc: stable@vger.kernel.org Cc: Mike Snitzer <snitzer@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Xiao Ni <xni@redhat.com> Cc: Mariusz Dabrowski <mariusz.dabrowski@intel.com> Fixes: b49a0871 ("block: remove split code in blkdev_issue_{discard,write_same}") Tested-by:
Rui Salvaterra <rsalvaterra@gmail.com> Signed-off-by:
-
Ming Lei authored
Cleanup __blkdev_issue_discard() a bit: - remove local variable of 'end_sect' - remove code block of 'fail' Cc: Mike Snitzer <snitzer@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Xiao Ni <xni@redhat.com> Cc: Mariusz Dabrowski <mariusz.dabrowski@intel.com> Tested-by:
-
Ming Lei authored
Obviously the created discard bio has to be aligned with logical block size. This patch introduces the helper of bio_allowed_max_sectors() for this purpose. Cc: stable@vger.kernel.org Cc: Mike Snitzer <snitzer@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Xiao Ni <xni@redhat.com> Cc: Mariusz Dabrowski <mariusz.dabrowski@intel.com> Fixes: 744889b7 ("block: don't deal with discard limit in blkdev_issue_discard()") Fixes: a22c4d7e ("block: re-add discard_granularity and alignment checks") Reported-by:
-
Christoph Hellwig authored
This reverts commit 2acf70ad. The commit never really fixed the intended issue and caused all kinds of other issues, including a use before initialization. Suggested-by:
-
Sagi Grimberg authored
Whenever we update ns_head info, we need to make sure it is still compatible with all underlying backing devices because although nvme multipath doesn't have any explicit use of these limits, other devices can still be stacked on top of it which may rely on the underlying limits. Start with unlimited stacking limits, and every info update iterate over siblings and adjust queue limits. Signed-off-by:
-
Sagi Grimberg authored
Even without CONFIG_P2PDMA this results in a error print: nvmet: no peer-to-peer memory is available that's supported by rxe0 and /dev/nullb0 Fixes: c6925093 ("nvmet: Optionally use PCI P2P memory") Signed-off-by:
Logan Gunthorpe <logang@deltatee.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds authored
Pull s390 fixes from Martin Schwidefsky: - A fix for the pgtable_bytes misaccounting on s390. The patch changes common code part in regard to page table folding and adds extra checks to mm_[inc|dec]_nr_[pmds|puds]. - Add FORCE for all build targets using if_changed - Use non-loadable phdr for the .vmlinux.info section to avoid a segment overlap that confuses kexec - Cleanup the attribute definition for the diagnostic sampling - Increase stack size for CONFIG_KASAN=y builds - Export __node_distance to fix a build error - Correct return code of a PMU event init function - An update for the default configs * tag 's390-4.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/perf: Change CPUM_CF return code in event init function s390: update defconfigs s390/mm: Fix ERROR: "__node_distance" undefined! s390/kasan: increase instrumented stack size to 64k s390/cpum_sf: Rework attribute definition for diagnostic sampling s390/mm: fix mis-accounting of pgtable_bytes mm: add mm_pxd_folded checks to pgtable_bytes accounting functions mm: introduce mm_[p4d|pud|pmd]_folded mm: make the __PAGETABLE_PxD_FOLDED defines non-empty s390: avoid vmlinux segments overlap s390/vdso: add missing FORCE to build targets s390/decompressor: add missing FORCE to build targets
-
- 08 Nov, 2018 6 commits
-
-
git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds authored
Pull xfs fixes from Darrick Wong: - fix incorrect dropping of error code from bmap - print buffer offsets instead of useless hashed pointers when dumping corrupt metadata - fix integer overflow in attribute verifier * tag 'xfs-4.20-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: fix overflow in xfs_attr3_leaf_verify xfs: print buffer offsets when dumping corrupt buffers xfs: Fix error code in 'xfs_ioc_getbmap()'
-
Linus Torvalds authored
Merge tag 'led-fixes-for-4.20-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds Pull LED fixes from Jacek Anaszewski: "All three fixes are related to the newly added pattern trigger: - remove mutex_lock() from timer callback, which would trigger problems related to sleeping in atomic context, the removal is harmless since mutex protection turned out to be redundant in this case - fix pattern parsing to properly handle intervals with brightness == 0 - fix typos in the ABI documentation" * tag 'led-fixes-for-4.20-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds: Documentation: ABI: led-trigger-pattern: Fix typos leds: trigger: Fix sleeping function called from invalid context Fix pattern handling optimalization
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound fixes from Takashi Iwai: "Two small regression fixes for HD-audio: one about vga_switcheroo and runtime PM, and another about Oops on some Thinkpads" * tag 'sound-4.20-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - Fix incorrect clearance of thinkpad_acpi hooks vga_switcheroo: Fix missing gpu_bound call at audio client registration
-
Ilya Dryomov authored
No one is running pre-argonaut. In addition one of the argonaut features (NOSRCADDR) has been required since day one (and a half, 2.6.34 vs 2.6.35) of the kernel client. Allow for the possibility of reusing these feature bits later. Signed-off-by:
Ilya Dryomov <idryomov@gmail.com> Reviewed-by:
Sage Weil <sage@redhat.com>
-
Luis Henriques authored
This patch fixes a possible null pointer dereference in check_quota_exceeded, detected by the static checker smatch, with the following warning: fs/ceph/quota.c:240 check_quota_exceeded() error: we previously assumed 'realm' could be null (see line 188) Fixes: b7a29217 ("ceph: quota: support for ceph.quota.max_files") Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Luis Henriques <lhenriques@suse.com> Reviewed-by:
"Yan, Zheng" <zyan@redhat.com> Signed-off-by:
-
Luis Henriques authored
If we try to copy into a file that was just written, any data that is remote copied will be overwritten by our buffered writes once they are flushed. When this happens, the call to invalidate_inode_pages2_range will also return a -EBUSY error. This patch fixes this by also sync'ing the destination file before starting any copy. Fixes: 503f82a9 ("ceph: support copy_file_range file operation") Signed-off-by:
-
