- 29 Mar, 2021 40 commits
-
-
Aneesh Kumar K.V authored
With below two commits: commit c91435d9 ("powerpc/book3s64/hash/kuep: Enable KUEP on hash") commit b2ff33a1 ("powerpc/book3s64/hash/kuap: Enable kuap on hash") the kernel now supports kuap/kuep with hash translation. Hence select the Kconfig even when radix is disabled. Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210318034829.72255-1-aneesh.kumar@linux.ibm.com
-
Bhaskar Chowdhury authored
s/procesing/processing/ Signed-off-by:
Bhaskar Chowdhury <unixbhaskar@gmail.com> Acked-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
-
Nicholas Piggin authored
Hash faults use the trap vector to decide whether this is an instruction or data fault. This should use the TRAP accessor rather than open access regs->trap. This won't cause a problem at the moment because 64s only uses trap flags for system call interrupts (the norestart flag), but that could change if any other trap flags get used in future. Fixes: a4922f54 ("powerpc/64s: move the hash fault handling logic to C") Suggested-by:
Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by:
Nicholas Piggin <npiggin@gmail.com> Signed-off-by:
-
Christophe Leroy authored
In fault.c, #ifdef CONFIG_PPC_MEM_KEYS is not needed because all functions are always defined, and arch_vma_access_permitted() always returns true when CONFIG_PPC_MEM_KEYS is not defined so access_pkey_error() will return false so bad_access_pkey() will never be called. Include linux/pkeys.h to get a definition of vma_pkeys() for bad_access_pkey(). Signed-off-by:
-
Michael Ellerman authored
Section mismatch in reference from the function .fsl_add_bridge() to the function .init.text:.setup_pci_cmd() fsl_add_bridge() is not __init, and can't be, and is the only caller of setup_pci_cmd(). Fix it by making setup_pci_cmd() non-init. Signed-off-by:
-
Michael Ellerman authored
Section mismatch in reference from the function .smp_setup_pacas() to the function .init.text:.allocate_paca() The only caller of smp_setup_pacas() is setup_arch() which is __init, so mark smp_setup_pacas() __init. Signed-off-by:
-
Michael Ellerman authored
lkp reported warnings in some configuration due to update_current_thread_amr() being unused: arch/powerpc/mm/book3s64/pkeys.c:284:20: error: unused function 'update_current_thread_amr' static inline void update_current_thread_amr(u64 value) Which is because it's only use is inside an ifdef. We could move it inside the ifdef, but it's a single line function and only has one caller, so just fold it in. Similarly update_current_thread_iamr() is small and only called once, so fold it in also. Fixes: 48a8ab4e ("powerpc/book3s64/pkeys: Don't update SPRN_AMR when in kernel mode.") Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
-
Michael Ellerman authored
The build fails with CONFIG_PROC_FS=n: arch/powerpc/kernel/eeh.c:1571:12: error: ‘proc_eeh_show’ defined but not used 1571 | static int proc_eeh_show(struct seq_file *m, void *v) Wrap proc_eeh_show() in an ifdef to avoid it. Signed-off-by:
-
Jiapeng Chong authored
Fix the following coccicheck warning: ./arch/powerpc/platforms/maple/pci.c:37:16-17: WARNING comparing pointer to 0. Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Signed-off-by:
Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by:
-
Yang Li authored
fixed the following coccicheck: ./arch/powerpc/sysdev/xive/spapr.c:552:8-9: WARNING: return of 0/1 in function 'xive_spapr_match' with return type bool Reported-by:
Yang Li <yang.lee@linux.alibaba.com> Signed-off-by:
-
Christophe Leroy authored
Commit aac6a91f ("powerpc/asm: Remove unused symbols in asm-offsets.c") removed GPR15 to GPR31 but kept GPR14, probably because it pops up in a couple of comments when doing a grep. However, it was never used either, so remove it as well. Fixes: aac6a91f ("powerpc/asm: Remove unused symbols in asm-offsets.c") Signed-off-by:
-
Christophe Leroy authored
Sparse reports the following problems: arch/powerpc/math-emu/math.c:228:21: warning: Using plain integer as NULL pointer arch/powerpc/math-emu/math.c:228:31: warning: Using plain integer as NULL pointer arch/powerpc/math-emu/math.c:228:41: warning: Using plain integer as NULL pointer arch/powerpc/math-emu/math.c:228:51: warning: Using plain integer as NULL pointer arch/powerpc/math-emu/math.c:237:13: warning: incorrect type in initializer (different address spaces) arch/powerpc/math-emu/math.c:237:13: expected unsigned int [noderef] __user *_gu_addr arch/powerpc/math-emu/math.c:237:13: got unsigned int [usertype] * arch/powerpc/math-emu/math.c:226:1: warning: symbol 'do_mathemu' was not declared. Should it be static? Add missing __user qualifier when casting pointer used in get_user() Use NULL instead of 0 to initialise opX local variables. Add a prototype for do_mathemu() (Added in processor.h like sparc) Reported-by:
-
Bhaskar Chowdhury authored
s/detalis/details/ Signed-off-by:
-
Bhaskar Chowdhury authored
Trivial spelling fixes throughout the file. Signed-off-by:
-
Christophe Leroy authored
Commit 6ec4476a ("Raise gcc version requirement to 4.9") made it impossible to build with gcc 4.8 and under. Remove related workaround. Signed-off-by:
-
Christophe Leroy authored
Move all KUAP management in C. Signed-off-by:
-
Christophe Leroy authored
In preparation of porting PPC32 to C syscall entry/exit, create C version of kuap_save_and_lock() and kuap_user_restore() and kuap_kernel_restore() and kuap_assert_locked() and kuap_get_and_assert_locked() on 8xx. Signed-off-by:
-
Christophe Leroy authored
In preparation of porting PPC32 to C syscall entry/exit, create C version of kuap_save_and_lock() and kuap_user_restore() and kuap_kernel_restore() and kuap_assert_locked() and kuap_get_and_assert_locked() on book3s/32. Signed-off-by:
-
Christophe Leroy authored
In preparation of porting powerpc32 to C syscall entry/exit, rename kuap_check_amr() and kuap_get_and_check_amr() as kuap_assert_locked() and kuap_get_and_assert_locked(), and move in the generic asm/kup.h the stub for when CONFIG_PPC_KUAP is not selected. Signed-off-by:
-
Christophe Leroy authored
This can be done in C, do it. Unrolling the loop gains approx. 15% performance. From now on, prepare_transfer_to_handler() is only for interrupts from kernel. Signed-off-by:
-
Christophe Leroy authored
Only book3s/32 and e500 have significative work to do in prepare_transfer_to_handler. Other 32 bit have nothing to do at all. Signed-off-by:
-
Christophe Leroy authored
transfer_to_handler_cont: is now just a blr. Directly perform blr in power_save_ppc32_restore(). Also remove useless setting of r11 in e500 version of power_save_ppc32_restore(). Signed-off-by:
-
Christophe Leroy authored
Save non volatile registers, XER, CTR, MSR and NIP in exception prolog. Also assign proper value to r2 and r3 there. For now, recalculate thread pointer in prepare_transfer_to_handler. It will disappear once KUAP is ported to C. And remove the comment which is now completely wrong. Signed-off-by:
-
Christophe Leroy authored
Exception prologs all do the same at the end: - Save trapno in stack - Mark stack with exception marker - Save r0 - Save r3 to r8 Refactor that into a COMMON_EXCEPTION_PROLOG_END macro. At the same time use r1 instead of r11. Signed-off-by:
-
Christophe Leroy authored
The xfer parameter is not used anymore, remove it. Signed-off-by:
-
Christophe Leroy authored
In order to get more control in exception prolog, dismantle all non standard exception macros, finishing with EXC_XFER_STD and EXC_XFER_LITE and EXC_XFER_TEMPLATE. Also remove transfer_to_handler_full and ret_from_except and ret_from_except_full as they are not used anymore. Last parameter of EXCEPTION() is now ignored, will be removed in a later patch to avoid too much churn. Signed-off-by:
-
Christophe Leroy authored
Until now, non volatile registers were restored everytime they were saved, ie using EXC_XFER_STD meant saving and restoring them while EXC_XFER_LITE meant neither saving not restoring them. Now that they are always saved, EXC_XFER_STD means to restore them and EXC_XFER_LITE means to not restore them. Most of the users of EXC_XFER_STD only need to retrieve the non volatile registers. For them there is no need to restore the non volatile registers as they have not been modified. Only very few exceptions require non volatile registers restore. Opencode the few places which require saving of non volatile registers. Signed-off-by:
-
Christophe Leroy authored
In order to increase flexibility, add a macro that will for now call transfer_to_handler. As transfer_to_handler doesn't do the actual transfer anymore, also name it prepare_transfer_to_handler. The following patches will progressively remove the use of transfer_to_handler label. Signed-off-by:
-
Christophe Leroy authored
Saving the trap number into the stack goes into the exception prolog, as EXC_XFER_xxx will soon disappear. Signed-off-by:
-
Christophe Leroy authored
Now that non volatile registers are saved at all time, no need to split bad_page_fault() out of do_page_fault(). Remove handle_page_fault() and use do_page_fault() directly. Signed-off-by:
-
Christophe Leroy authored
All exception handlers take regs as first parameter. Instead of setting r3 just before each call to a handler, set it in transfer_to_handler. Signed-off-by:
-
Christophe Leroy authored
Since commit 06d67d54 ("powerpc: make process.c suitable for both 32-bit and 64-bit"), thread.regs is set on task creation, no need to set it again and again at each interrupt entry as it never change. Suggested-by:
-
Christophe Leroy authored
This patch replaces the PPC32 ASM exception exit by C exception exit. Signed-off-by:
-
Christophe Leroy authored
In preparation of handling exception entry and exit in C, in order to simplify the handling, always save non volatile registers when entering an exception. Signed-off-by:
-
Christophe Leroy authored
Now that the MMU is re-enabled before calling the transfer function, we don't need anymore that hack with the address of the handler and the return function sitting just after the 'bl' to the transfer fonction, that function is retrieving via a read relative to 'lr'. Do a regular call to the transfer function, then to the handler, then branch to the return function. Signed-off-by:
-
Christophe Leroy authored
Refactor booke critical registers saving into a few macros and move it into the exception prolog directly. Keep the dedicated transfert_to_handler entry point for the moment allthough they are empty. They will be removed in a later patch to reduce churn. Signed-off-by:
-
Christophe Leroy authored
Now that the prolog continuation is separated in .text, give it a name and mark it _ASM_NOKPROBE_SYMBOL. Signed-off-by:
-
Christophe Leroy authored
The space in the head section is rather constrained by the fact that exception vectors are spread every 0x100 bytes and sometimes we need to have "out of line" code because it doesn't fit. Now that we are enabling MMU early in the prolog, take that opportunity to jump somewhere else in the .text section where we don't have any space constraint. Signed-off-by:
-
Christophe Leroy authored
Everywhere where it is possible, use START_EXCEPTION(). This will help for proper exception init in future patches. Signed-off-by:
-
Christophe Leroy authored
For consistency, add in the macro the label used by exception prolog to branch to stack overflow processing. While at it, enclose the macro in #ifdef CONFIG_VMAP_STACK on the 8xx as already done on book3s/32. Signed-off-by:
-
