An error occurred fetching the project authors.
- 01 Jul, 2020 13 commits
-
-
Lee Jones authored
It's odd for the return value to be assigned to a variable so many times, but never actually checked, but this has been the case since the driver's inception in 2012. If it hasn't caused any issues by now, it's probably unlikely to. Let's take it out, at least until someone finds a reason to start using it. Fixes the following W=1 kernel build warning: drivers/misc/lattice-ecp3-config.c: In function ‘firmware_load’: drivers/misc/lattice-ecp3-config.c:70:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable] 70 | int ret; | ^~~ Cc: Stefan Roese <sr@denx.de> Signed-off-by:
Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20200701085853.164358-13-lee.jones@linaro.orgSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Lee Jones authored
Firstly some missing function argument documentation, then some whch are present, but are incorrectly named. Fixes the following W=1 kernel build warnings: drivers/misc/enclosure.c:115: warning: Function parameter or member 'name' not described in 'enclosure_register' drivers/misc/enclosure.c:115: warning: Function parameter or member 'cb' not described in 'enclosure_register' drivers/misc/enclosure.c:283: warning: Function parameter or member 'number' not described in 'enclosure_component_alloc' drivers/misc/enclosure.c:283: warning: Excess function parameter 'num' description in 'enclosure_component_alloc' drivers/misc/enclosure.c:363: warning: Function parameter or member 'component' not described in 'enclosure_add_device' drivers/misc/enclosure.c:363: warning: Excess function parameter 'num' description in 'enclosure_add_device' drivers/misc/enclosure.c:398: warning: Function parameter or member 'dev' not described in 'enclosure_remove_device' drivers/misc/enclosure.c:398: warning: Excess function parameter 'num' description in 'enclosure_remove_device' Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by:
-
Lee Jones authored
gaudi_pb_set_block()'s argument 'base' was incorrectly named 'block' in its function header. Fixes the following W=1 kernel build warning(s): drivers/misc/habanalabs/gaudi/gaudi_security.c:454: warning: Function parameter or member 'base' not described in 'gaudi_pb_set_block' drivers/misc/habanalabs/gaudi/gaudi_security.c:454: warning: Excess function parameter 'block' description in 'gaudi_pb_set_block' Cc: Oded Gabbay <oded.gabbay@gmail.com> Cc: Tomer Tayar <ttayar@habana.ai> Signed-off-by:
Oded Gabbay <oded.gabbay@gmail.com> Link: https://lore.kernel.org/r/20200701085853.164358-11-lee.jones@linaro.orgSigned-off-by:
-
Lee Jones authored
W=1 kernel builds report a lack of description of gaudi_set_asic_funcs()'s 'hdev' argument. In reality it is documented, but the formatting was not as expected '@.*:'. Instead, there was a misplaced asterisk which was confusing the kerneldoc validator. Squashes the following W=1 warning: drivers/misc/habanalabs/gaudi/gaudi.c:6746: warning: Function parameter or member 'hdev' not described in 'gaudi_set_asic_funcs' Cc: Oded Gabbay <oded.gabbay@gmail.com> Cc: Tomer Tayar <ttayar@habana.ai> Signed-off-by:
-
Lee Jones authored
No attempt to check the return value of RREG32() has been made since the call was introduced a year ago. Fixes W=1 kernel build warning: drivers/misc/habanalabs/goya/goya_coresight.c: In function ‘goya_debug_coresight’: drivers/misc/habanalabs/goya/goya_coresight.c:643:6: warning: variable ‘val’ set but not used [-Wunused-but-set-variable] 643 | u32 val; | ^~~ Cc: Oded Gabbay <oded.gabbay@gmail.com> Cc: Tomer Tayar <ttayar@habana.ai> Signed-off-by:
-
Lee Jones authored
'dma_mask' is not passed directly into hl_pci_set_dma_mask() as an argument. Instead, it is pulled from struct hl_device *hdev. Fixed the following W=1 warning: drivers/misc/habanalabs/pci.c:328: warning: Excess function parameter 'dma_mask' description in 'hl_pci_set_dma_mask Cc: Oded Gabbay <oded.gabbay@gmail.com> Cc: Tomer Tayar <ttayar@habana.ai> Signed-off-by:
-
Lee Jones authored
Seeing as 'addr' is unsigned, it would be impossible for the assigned value to be anything other than zero or positive. Squashes the following W=1 warnings: drivers/misc/habanalabs/goya/goya.c: In function ‘goya_debugfs_read32’: drivers/misc/habanalabs/goya/goya.c:3945:19: warning: comparison of unsigned expression >= 0 is always true [-Wtype-limits] 3945 | } else if ((addr >= DRAM_PHYS_BASE) && | ^~ drivers/misc/habanalabs/goya/goya.c: In function ‘goya_debugfs_write32’: drivers/misc/habanalabs/goya/goya.c:4002:19: warning: comparison of unsigned expression >= 0 is always true [-Wtype-limits] 4002 | } else if ((addr >= DRAM_PHYS_BASE) && | ^~ drivers/misc/habanalabs/goya/goya.c: In function ‘goya_debugfs_read64’: drivers/misc/habanalabs/goya/goya.c:4047:19: warning: comparison of unsigned expression >= 0 is always true [-Wtype-limits] 4047 | } else if ((addr >= DRAM_PHYS_BASE) && | ^~ drivers/misc/habanalabs/goya/goya.c: In function ‘goya_debugfs_write64’: drivers/misc/habanalabs/goya/goya.c:4091:19: warning: comparison of unsigned expression >= 0 is always true [-Wtype-limits] 4091 | } else if ((addr >= DRAM_PHYS_BASE) && | ^~ drivers/misc/habanalabs/pci.c:328: warning: Excess function parameter 'dma_mask' description in 'hl_pci_set_dma_mask' drivers/misc/habanalabs/goya/goya_coresight.c: In function ‘goya_debug_coresight’: drivers/misc/habanalabs/goya/goya_coresight.c:643:6: warning: variable ‘val’ set but not used [-Wunused-but-set-variable] 643 | u32 val; | ^~~ Cc: Oded Gabbay <oded.gabbay@gmail.com> Cc: Tomer Tayar <ttayar@habana.ai> Signed-off-by:
-
Lee Jones authored
W=1 kernel builds report a lack of descriptions for various function arguments. In reality they are documented, but the formatting was not as expected '@.*:'. Instead, '-'s were used as separators. While we're here, the headers for functions various functions were written in kerneldoc format, but lack the kerneldoc identifier '/**'. Let's promote them so they can gain access to the checker. This change fixes the following W=1 warnings: drivers/misc/habanalabs/irq.c:24: warning: Function parameter or member 'eq_work' not described in 'hl_eqe_work' drivers/misc/habanalabs/irq.c:24: warning: Function parameter or member 'hdev' not described in 'hl_eqe_work' drivers/misc/habanalabs/irq.c:24: warning: Function parameter or member 'eq_entry' not described in 'hl_eqe_work' Cc: Oded Gabbay <oded.gabbay@gmail.com> Cc: Tomer Tayar <ttayar@habana.ai> Signed-off-by:
-
Lee Jones authored
hl_pci_bars_map() has a miss-typed argument name in the function description. hl_pci_elbi_write() was missing documented arguments. The headers for functions hl_pci_bars_unmap(), hl_pci_elbi_write() and hl_pci_reset_link_through_bridge() were written in kerneldoc format, but lack the kerneldoc identifier '/**'. Let's promote them so they can gain access to the checker. These changes fix the following W=1 kernel build warnings: drivers/misc/habanalabs/pci.c:27: warning: Function parameter or member 'name' not described in 'hl_pci_bars_map' drivers/misc/habanalabs/pci.c:27: warning: Excess function parameter 'bar_name' description in 'hl_pci_bars_map' drivers/misc/habanalabs/pci.c:147: warning: Function parameter or member 'addr' not described in 'hl_pci_iatu_write' drivers/misc/habanalabs/pci.c:147: warning: Function parameter or member 'data' not described in 'hl_pci_iatu_write' drivers/misc/habanalabs/pci.c:324: warning: Excess function parameter 'dma_mask' description in 'hl_pci_set_dma_mask' Cc: Oded Gabbay <oded.gabbay@gmail.com> Cc: Tomer Tayar <ttayar@habana.ai> Signed-off-by:
-
Lee Jones authored
Looks as though documentation for these function arguments have been missing since the driver's inception last year. Fixes the following W=1 kernel build warnings: drivers/misc/habanalabs/firmware_if.c:26: warning: Function parameter or member 'fw_name' not described in 'hl_fw_load_fw_to_device' drivers/misc/habanalabs/firmware_if.c:26: warning: Function parameter or member 'dst' not described in 'hl_fw_load_fw_to_device' Cc: Oded Gabbay <oded.gabbay@gmail.com> Cc: Tomer Tayar <ttayar@habana.ai> Signed-off-by:
-
Lee Jones authored
The kerneldoc tooling/parsers/validators get confused if non- standard formatting is used. The first line after the kerneldoc identifier '/**' must not be blank else the following warnings will be issued: drivers/misc/pti.c:902: warning: Cannot understand * on line 902 - I thought it was a doc line Cc: J Freyensee <james_p_freyensee@linux.intel.com> Signed-off-by:
-
Lee Jones authored
W=1 kernel builds report a lack of descriptions for various function arguments. In reality they are documented, but the formatting was not as expected '@.*:'. Instead, '-'s were used as separators. This change fixes the following warnings: drivers/misc/pti.c:748: warning: Function parameter or member 'port' not described in 'pti_port_activate' drivers/misc/pti.c:748: warning: Function parameter or member 'tty' not described in 'pti_port_activate' drivers/misc/pti.c:765: warning: Function parameter or member 'port' not described in 'pti_port_shutdown' drivers/misc/pti.c:793: warning: Function parameter or member 'pdev' not described in 'pti_pci_probe' drivers/misc/pti.c:793: warning: Function parameter or member 'ent' not described in 'pti_pci_probe' Cc: J Freyensee <james_p_freyensee@linux.intel.com> Signed-off-by:
-
Greg Kroah-Hartman authored
This reverts commit 6bf23661. 0-day reported build problems with it. Reported-by:
kernel test robot <lkp@intel.com> Cc: Vaibhav Gupta <vaibhavgupta40@gmail.com> Signed-off-by:
-
- 29 Jun, 2020 27 commits
-
-
Lee Jones authored
The API has moved on since the original function header was authored. This changes brings the function's documentation back into line with reality, complete descriptions of the latest arguments to be used. Squashes the following W=1 kernel build warnings: drivers/misc/pti.c:510: warning: Function parameter or member 'tty' not described in 'pti_tty_driver_wr drivers/misc/pti.c:510: warning: Function parameter or member 'buf' not described in 'pti_tty_driver_wr drivers/misc/pti.c:510: warning: Excess function parameter 'filp' description in 'pti_tty_driver_write' drivers/misc/pti.c:510: warning: Excess function parameter 'data' description in 'pti_tty_driver_write' Cc: J Freyensee <james_p_freyensee@linux.intel.com> Acked-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Lee Jones authored
In kerneldoc format, data structures have to start with 'struct' else the kerneldoc tooling/parsers/validators get confused. Squashes the following W=1 warning: drivers/misc/habanalabs/irq.c:19: warning: cannot understand function prototype: 'struct hl_eqe_work ' Cc: Oded Gabbay <oded.gabbay@gmail.com> Reviewed-by:
-
Lee Jones authored
An attempt was made to provide a proper kerneldoc header for cb710_sg_dwiter_write_next_block(), but a description for it's 'data' argument was missed. Squashes W=1 kernel build warning: drivers/misc/cb710/sgbuf2.c:131: warning: Function parameter or member 'data' not described in 'cb710_sg_dwiter_write_next_block' Cc: "Michał Mirosław" <mirq-linux@rere.qmqm.pl> Acked-by:
Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by:
-
Lee Jones authored
Hasn't been checked since its conception 2 years ago. Squashes W=1 warning: drivers/misc/mic/vop/vop_main.c: In function ‘_vop_scan_devices’: drivers/misc/mic/vop/vop_main.c:617:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable] 617 | int ret; | ^~~ Cc: Sudeep Dutt <sudeep.dutt@intel.com> Cc: Ashutosh Dixit <ashutosh.dixit@intel.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by:
-
Lee Jones authored
Copy-paste issue. Looks like the kerneldoc style descriptions for these functions were taken from existing functions with slightly different argument names. Fixes the following W=1 warnings: drivers/misc/eeprom/eeprom_93cx6.c:239: warning: Function parameter or member 'byte' not described in 'eeprom_93cx6_readb' drivers/misc/eeprom/eeprom_93cx6.c:239: warning: Excess function parameter 'word' description in 'eeprom_93cx6_readb' drivers/misc/eeprom/eeprom_93cx6.c:280: warning: Function parameter or member 'bytes' not described in 'eeprom_93cx6_multireadb' drivers/misc/eeprom/eeprom_93cx6.c:280: warning: Excess function parameter 'words' description in 'eeprom_93cx6_multireadb' Cc: Wolfram Sang <wsa@kernel.org> Acked-by:
-
Lee Jones authored
The result may not be intereresting, but not using a set variable is bad form and causes W=1 kernel builds to complain. Fixes the following W=1 warning(s): drivers/misc/lkdtm/bugs.c: In function ‘lkdtm_STACK_GUARD_PAGE_LEADING’: drivers/misc/lkdtm/bugs.c:331:25: warning: variable ‘byte’ set but not used [-Wunused-but-set-variable] 331 | volatile unsigned char byte; | ^~~~ drivers/misc/lkdtm/bugs.c: In function ‘lkdtm_STACK_GUARD_PAGE_TRAILING’: drivers/misc/lkdtm/bugs.c:345:25: warning: variable ‘byte’ set but not used [-Wunused-but-set-variable] 345 | volatile unsigned char byte; | ^~~~ Cc: Kees Cook <keescook@chromium.org> Acked-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Lee Jones authored
If it's still in use and worth the effort, it sure looks like this driver could do with a good scrub (clean). This patch conserns itself with the non-standard comments located thoughout the file. It also fixes the following W=1 warnings by demoting the kerneldoc function headers to standard comments, since there doesn't appear to be a requirement for the function args to be documented: /drivers/misc/ti-st/st_kim.c:42: warning: Function parameter or member 'id' not described in 'st_get_plat_device' /drivers/misc/ti-st/st_kim.c:53: warning: Function parameter or member 'kim_gdata' not described in 'validate_firmware_response' /drivers/misc/ti-st/st_kim.c:126: warning: Function parameter or member 'kim_gdata' not described in 'kim_int_recv' /drivers/misc/ti-st/st_kim.c:126: warning: Function parameter or member 'data' not described in 'kim_int_recv' /drivers/misc/ti-st/st_kim.c:126: warning: Function parameter or member 'count' not described in 'kim_int_recv' /drivers/misc/ti-st/st_kim.c:272: warning: Function parameter or member 'kim_gdata' not described in 'download_firmware' /drivers/misc/ti-st/st_kim.c:445: warning: Function parameter or member 'kim_data' not described in 'st_kim_start' /drivers/misc/ti-st/st_kim.c:509: warning: Function parameter or member 'kim_data' not described in 'st_kim_stop' /drivers/misc/ti-st/st_kim.c:661: warning: Function parameter or member 'core_data' not described in 'st_kim_ref' /drivers/misc/ti-st/st_kim.c:661: warning: Function parameter or member 'id' not described in 'st_kim_ref' Cc: Pavan Savoy <pavan_savoy@ti.com> Acked-by:
-
Lee Jones authored
If it's still in use and worth the effort, it sure looks like this driver could do with a good scrub (clean). This patch conserns itself with the non-standard comments located thoughout the file. It also fixes the following W=1 warnings by demoting the kerneldoc function headers to standard comments, since there doesn't appear to be a requirement for the function args to be documented: drivers/misc/ti-st/st_core.c:132: warning: Function parameter or member 'st_gdata' not described in 'st_reg_complete' drivers/misc/ti-st/st_core.c:132: warning: Function parameter or member 'err' not described in 'st_reg_complete' drivers/misc/ti-st/st_core.c:197: warning: Function parameter or member 'st_gdata' not described in 'st_wakeup_ack' drivers/misc/ti-st/st_core.c:197: warning: Function parameter or member 'cmd' not described in 'st_wakeup_ack' drivers/misc/ti-st/st_core.c:226: warning: Function parameter or member 'disc_data' not described in 'st_int_recv' drivers/misc/ti-st/st_core.c:226: warning: Function parameter or member 'data' not described in 'st_int_recv' drivers/misc/ti-st/st_core.c:226: warning: Function parameter or member 'count' not described in 'st_int_recv' drivers/misc/ti-st/st_core.c:387: warning: Function parameter or member 'st_gdata' not described in 'st_int_dequeue' drivers/misc/ti-st/st_core.c:409: warning: Function parameter or member 'st_gdata' not described in 'st_int_enqueue' drivers/misc/ti-st/st_core.c:409: warning: Function parameter or member 'skb' not described in 'st_int_enqueue' Cc: Pavan Savoy <pavan_savoy@ti.com> Cc: Naveen Jain <naveen_jain@ti.com> Acked-by:
-
Lee Jones authored
We need to ensure there's a place for the NULL terminator. Fixes the following W=1 warning(s): In file included from include/linux/bitmap.h:9, from include/linux/nodemask.h:95, from include/linux/mmzone.h:17, from include/linux/gfp.h:6, from include/linux/umh.h:4, from include/linux/kmod.h:9, from include/linux/module.h:16, from drivers/misc/c2port/core.c:9: In function ‘strncpy’, inlined from ‘c2port_device_register’ at drivers/misc/c2port/core.c:926:2: include/linux/string.h:297:30: warning: ‘__builtin_strncpy’ specified bound 32 equals destination size [-Wstringop-truncation] 297 | #define __underlying_strncpy __builtin_strncpy | ^ include/linux/string.h:307:9: note: in expansion of macro ‘__underlying_strncpy’ 307 | return __underlying_strncpy(p, q, size); | ^~~~~~~~~~~~~~~~~~~~ Cc: Rodolfo Giometti <giometti@linux.it> Cc: "Eurotech S.p.A" <info@eurotech.it> Acked-by:
Rodolfo Giometti <giometti@enneenne.com> Signed-off-by:
-
Vaibhav Gupta authored
Drivers should not use legacy power management as they have to manage power states and related operations, for the device, themselves. This driver was handling them with the help of PCI helper functions like pci_save/restore_state(), pci_enable/disable_device(), etc. With generic PM, all essentials will be handled by the PCI core. Driver needs to do only device-specific operations. The driver was also using pci_enable_wake(...,..., 0) to disable wake. Use device_wakeup_disable() instead. It was also saving device register configuration using pch_phub_save/restore_reg_conf() which is not recommended. Compile-tested only. Signed-off-by:
Vaibhav Gupta <vaibhavgupta40@gmail.com> Link: https://lore.kernel.org/r/20200629081531.214734-6-vaibhavgupta40@gmail.comSigned-off-by:
-
Vaibhav Gupta authored
With the support of generic PM callbacks, drivers no longer need to use legacy .suspend() and .resume() in which they had to maintain PCI states changes and device's power state themselves. All required operations are done by PCI core. Driver needs to do only device-specific operations. Compile-tested only. Signed-off-by:
-
Vaibhav Gupta authored
Drivers should not use legacy power management as they have to manage power states and related operations, for the device, themselves. This driver was handling them with the help of PCI helper functions like pci_save/restore_state(), pci_enable/disable_device(), etc. With generic PM, all essentials will be handled by the PCI core. Driver needs to do only device-specific operations. The driver was also using pci_enable_wake(...,..., 0) to disable wake. Use device_wakeup_disable() instead. Compile-tested only. Signed-off-by:
-
Vaibhav Gupta authored
Drivers should not use legacy power management as they have to manage power states and related operations, for the device, themselves. This driver was handling them with the help of PCI helper functions like pci_save/restore_state(), pci_enable/disable_device(), etc. With generic PM, all essentials will be handled by the PCI core. Driver needs to do only device-specific operations. The driver was also using pci_enable_wake(...,..., 0) to disable wake. Use device_wakeup_disable() instead. Compile-tested only. Signed-off-by:
-
Vaibhav Gupta authored
Drivers should not use legacy power management as they have to manage power states and related operations, for the device, themselves. This driver was handling them with the help of PCI helper functions like pci_save/restore_state(), pci_enable/disable_device(), etc. With generic PM, all essentials will be handled by the PCI core. Driver needs to do only device-specific operations. Compile-tested only. Signed-off-by:
-
Kees Cook authored
I'd like arch-specific tests to XFAIL when on a mismatched architecture so that we can more easily compare test coverage across all systems. Lacking kernel configs or CPU features count as a FAIL, not an XFAIL. Additionally fixes a build failure under 32-bit UML. Fixes: b09511c2 ("lkdtm: Add a DOUBLE_FAULT crash type on x86") Fixes: cea23efb ("lkdtm/bugs: Make double-fault test always available") Fixes: 6cb6982f ("lkdtm: arm64: test kernel pointer authentication") Signed-off-by:
-
Kees Cook authored
Since we expect to see warnings every time for many tests, just reset the WARN_ONCE flags each time the script runs. Fixes: 46d1a0f0 ("selftests/lkdtm: Add tests for LKDTM targets") Signed-off-by:
-
Kees Cook authored
Har har, after I moved the slab freelist pointer into the middle of the slab, now it looks like the contents are getting poisoned. Adjust the test to avoid the freelist pointer again. Fixes: 3202fa62 ("slub: relocate freelist pointer to middle of object") Cc: stable@vger.kernel.org Signed-off-by:
-
Kees Cook authored
It seems at least Clang is able to throw away writes it knows are destined for read-only memory, which makes things like the WRITE_RO test fail, as the write gets elided. Instead, force the variable to be volatile, and make similar changes through-out other tests in an effort to avoid needing to repeat fixing these kinds of problems. Also includes pr_err() calls in failure paths so that kernel logs are more clear in the failure case. Reported-by:
Prasad Sodagudi <psodagud@codeaurora.org> Suggested-by:
Sami Tolvanen <samitolvanen@google.com> Fixes: 9ae113ce ("lkdtm: add tests for additional page permissions") Signed-off-by:
-
Tomas Winkler authored
Add device ID for Intel Kaby Point PCH (Kabylake) which has Intel Precise Touch & Stylus IPTS (iTouch). Signed-off-by:
Tomas Winkler <tomas.winkler@intel.com> Link: https://lore.kernel.org/r/20200619165121.2145330-6-tomas.winkler@intel.comSigned-off-by:
-
Tomas Winkler authored
Add device ID for Intel Sunrise Point PCH (Skylake) which has Intel Precise Touch & Stylus IPTS (iTouch). Signed-off-by:
-
Tomas Winkler authored
Add kdoc for mei_me_fw_type_nm() function. Signed-off-by:
-
Tomas Winkler authored
Last add mei_me_fw_sku_sps_4() kdoc and add descriptive defines for register name and values. Signed-off-by:
-
Tomas Winkler authored
The quirk_probe there is no writing to pci device hence we can constify the passed pci_dev pointer. Signed-off-by:
-
Rikard Falkeborn authored
rtsx_usb_usb_ids is never modified and can therefore be made const to allow the compiler to put it in read-only memory. Before: text data bss dec hex filename 21513 4160 128 25801 64c9 drivers/misc/cardreader/rtsx_usb.o After: text data bss dec hex filename 21673 4000 128 25801 64c9 drivers/misc/cardreader/rtsx_usb.o Signed-off-by:
Rikard Falkeborn <rikard.falkeborn@gmail.com> Link: https://lore.kernel.org/r/20200610224704.27082-2-rikard.falkeborn@gmail.comSigned-off-by:
-
Rikard Falkeborn authored
genwqe_err_handler is never modified, so it can be made const to allow the compiler to put it in read-only memory. Before: text data bss dec hex filename 20174 6104 2464 28742 7046 drivers/misc/genwqe/card_base.o After: text data bss dec hex filename 20270 6008 2464 28742 7046 drivers/misc/genwqe/card_base.o Signed-off-by:
-
Rikard Falkeborn authored
mei_hdcp_tbl[] is never modified and can be made const to allow the compiler to put it in read-only memory. Before: text data bss dec hex filename 15844 5416 0 21260 530c drivers/misc/mei/hdcp/mei_hdcp.o After: text data bss dec hex filename 16004 5256 0 21260 530c drivers/misc/mei/hdcp/mei_hdcp.o Signed-off-by:
-
Rikard Falkeborn authored
vop_vq_config_ops and id_table[] are never modified so make them const to allow the compiler to put them in read-only memory. Before: text data bss dec hex filename 14889 4065 192 19146 4aca drivers/misc/mic/vop/vop_main.o After: text data bss dec hex filename 15113 3841 192 19146 4aca drivers/misc/mic/vop/vop_main.o Signed-off-by:
-
