- 09 Jan, 2015 14 commits
-
-
Arend van Spriel authored
Instead of defining SDIO device identifier in brcm80211 code use the defintions in linux/mmc/sdio_ids.h directly. Reviewed-by:
Hante Meuleman <meuleman@broadcom.com> Reviewed-by:
Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by:
Arend van Spriel <arend@broadcom.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org>
-
Eliad Peller authored
After having all the dfs infrastructure in place, declare radar_detect_widths support for the ap interfaces combination. Signed-off-by:
Eliad Peller <eliad@wizery.com> Signed-off-by:
-
Guy Mishol authored
Add dfs region to the reg domain channel update command. Signed-off-by:
Guy Mishol <guym@ti.com> Signed-off-by:
-
Eliad Peller authored
Since we are going to support dfs channels, there is no reason to mark them as NO_IR (having the DFS flag is enough anyway). Additionally, when setting the regdomain configuration, enable usable dfs channels. Signed-off-by:
-
Eliad Peller authored
call wlcore_cmd_dfs_master_restart when starting the ap on a new channel (after csa is done). Add a new WLVIF_FLAG_BEACON_DISABLED flag to indicate that dfs_master_restart command is required. Signed-off-by:
-
Eliad Peller authored
Support ap csa support by implementing the channel_switch_beacon() mac80211 op. Signed-off-by:
-
Eliad Peller authored
Add debugfs file to emulate radar detection through a special fw cmd (which in turn will generate radar event) Signed-off-by:
-
Eliad Peller authored
Add support for CAC start/stop commands, and pass radar detection events from the fw to mac80211. Bump fw name (to wl18xx-fw-4.bin) and min fw version (to 8.9.*.*.11), and align event mailbox accordingly. Signed-off-by:
-
Kobi L authored
Enable ELP authorization in AP mode and enable the use of the wakeup bit in the ELP register. Introduce AP role sleep configuration which is disabled by default. When configured, it allows the AP to sleep when ELP is authorized for it. Signed-off-by:
Kobi Leibovitch <kobi.lev100@gmail.com> Signed-off-by:
Arik Nemtsov <arik@wizery.com> Signed-off-by:
-
Eliad Peller authored
configure wowlan when host is suspended in AP mode, since the FW can now wake the host up on Rx. Signed-off-by:
-
Ram Amrani authored
Add the ability to mask FW interrupts on RX BA activity, PSM entry/exit and fast-link notifications. This is used when the host is suspended in order to decrease redundant wake ups. Signed-off-by:
Ram Amrani <ramrani@ti.com> Signed-off-by:
-
Eliad Peller authored
sta_rc_update runs in atomic context. thus, a new work should be scheduled in order to configure the fw with the required configuration. Signed-off-by:
-
Eliad Peller authored
Use kstrtoul_from_user() for reading the user value, and fix the following sparse warning: drivers/net/wireless/ti/wlcore/debugfs.c:937:15: error: incompatible types in comparison expression (different type sizes) Signed-off-by:
-
Eliad Peller authored
The attribute type is binary data (with max length). Signed-off-by:
-
- 07 Jan, 2015 11 commits
-
-
Julia Lawall authored
Convert a call to init_timer and accompanying intializations of the timer's data and function fields to a call to setup_timer. A simplified version of the semantic match that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression t,f,d; @@ -init_timer(&t); +setup_timer(&t,f,d); -t.function = f; -t.data = d; // </smpl> Signed-off-by:
Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by:
-
Julia Lawall authored
Convert a call to init_timer and accompanying intializations of the timer's data and function fields to a call to setup_timer. A simplified version of the semantic match that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression t,f,d; @@ -init_timer(&t); +setup_timer(&t,f,d); -t.function = f; -t.data = d; // </smpl> Signed-off-by:
-
Julia Lawall authored
Convert a call to init_timer and accompanying intializations of the timer's data and function fields to a call to setup_timer. A simplified version of the semantic match that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression t,f,d; @@ -init_timer(&t); +setup_timer(&t,f,d); -t.function = f; -t.data = d; // </smpl> Signed-off-by:
-
Julia Lawall authored
Convert a call to init_timer and accompanying intializations of the timer's data and function fields to a call to setup_timer. A simplified version of the semantic match that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression t,f,d; @@ -init_timer(&t); +setup_timer(&t,f,d); -t.function = f; -t.data = d; // </smpl> Signed-off-by:
-
Julia Lawall authored
Convert a call to init_timer and accompanying intializations of the timer's data and function fields to a call to setup_timer. A simplified version of the semantic match that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression t,f,d; @@ -init_timer(&t); +setup_timer(&t,f,d); -t.data = d; -t.function = f; // </smpl> Signed-off-by:
-
Julia Lawall authored
Convert a call to init_timer and accompanying intializations of the timer's data and function fields to a call to setup_timer. A simplified version of the semantic match that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression t,f,d; @@ -init_timer(&t); +setup_timer(&t,f,d); -t.data = d; -t.function = f; // </smpl> Signed-off-by:
-
Julia Lawall authored
Convert a call to init_timer and accompanying intializations of the timer's data and function fields to a call to setup_timer. A simplified version of the semantic match that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression t,f,d; @@ -init_timer(&t); +setup_timer(&t,f,d); -t.data = d; -t.function = f; // </smpl> Signed-off-by:
-
Julia Lawall authored
Convert a call to init_timer and accompanying intializations of the timer's data and function fields to a call to setup_timer. A simplified version of the semantic match that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression t,f,d; @@ -init_timer(&t); +setup_timer(&t,f,d); -t.data = d; -t.function = f; // </smpl> Signed-off-by:
-
Julia Lawall authored
Convert a call to init_timer and accompanying intializations of the timer's data and function fields to a call to setup_timer. A simplified version of the semantic match that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression t,f,d; @@ -init_timer(&t); +setup_timer(&t,f,d); -t.data = d; -t.function = f; // </smpl> Signed-off-by:
-
Fred Chou authored
Use rt2x00_has_cap_flag macro to check rt2x00dev->cap_flags. Signed-off-by:
Fred Chou <fred.chou.nd@gmail.com> Acked-by:
Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by:
-
Chen Gang authored
do_div() checks the type strictly. 'cycles_t' may be 32-bit under quite a few architectures (parisc, arm, avr32 ...). So use 'uint64_t' instead of, the related warning (with allmodconfig under parisc): CC [M] drivers/net/wireless/ath/wil6210/debugfs.o In file included from arch/parisc/include/generated/asm/div64.h:1:0, from include/linux/kernel.h:124, from include/linux/list.h:8, from include/linux/module.h:9, from drivers/net/wireless/ath/wil6210/debugfs.c:17: drivers/net/wireless/ath/wil6210/debugfs.c: In function ‘wil_vring_debugfs_show’: include/asm-generic/div64.h:43:28: warning: comparison of distinct pointer types lacks a cast (void)(((typeof((n)) *)0) == ((uint64_t *)0)); \ ^ drivers/net/wireless/ath/wil6210/debugfs.c:107:4: note: in expansion of macro ‘do_div’ do_div(idle, total); ^ In file included from include/uapi/linux/stddef.h:1:0, from include/linux/stddef.h:4, from ./include/uapi/linux/posix_types.h:4, from include/uapi/linux/types.h:13, from include/linux/types.h:5, from include/linux/list.h:4, from include/linux/module.h:9, from drivers/net/wireless/ath/wil6210/debugfs.c:17: include/asm-generic/div64.h:44:18: warning: right shift count >= width of type [-Wshift-count-overflow] if (likely(((n) >> 32) == 0)) { \ ^ include/linux/compiler.h:159:40: note: in definition of macro ‘likely’ # define likely(x) __builtin_expect(!!(x), 1) ^ drivers/net/wireless/ath/wil6210/debugfs.c:107:4: note: in expansion of macro ‘do_div’ do_div(idle, total); ^ In file included from arch/parisc/include/generated/asm/div64.h:1:0, from include/linux/kernel.h:124, from include/linux/list.h:8, from include/linux/module.h:9, from drivers/net/wireless/ath/wil6210/debugfs.c:17: include/asm-generic/div64.h:48:22: warning: passing argument 1 of ‘__div64_32’ from incompatible pointer type [-Wincompatible-pointer-types] __rem = __div64_32(&(n), __base); \ ^ drivers/net/wireless/ath/wil6210/debugfs.c:107:4: note: in expansion of macro ‘do_div’ do_div(idle, total); ^ include/asm-generic/div64.h:35:17: note: expected ‘uint64_t * {aka long long unsigned int *}’ but argument is of type ‘cycles_t * {aka long unsigned int *}’ extern uint32_t __div64_32(uint64_t *dividend, uint32_t divisor); ^ Signed-off-by:Chen Gang <gang.chen.5i5j@gmail.com> Signed-off-by:
-
- 06 Jan, 2015 15 commits
-
-
Maithili Hinge authored
This patch adds support for wowlan disconnect. Signed-off-by:
Maithili Hinge <maithili@marvell.com> Signed-off-by:
Avinash Patil <patila@marvell.com> Signed-off-by:
Amitkumar Karwar <akarwar@marvell.com> Signed-off-by:
-
Maithili Hinge authored
This patch moves code for wowlan magic-packet and patterns to a function mwifiex_set_mef_filter. Signed-off-by:
-
Amitkumar Karwar authored
When driver is loaded, it is important to know if FW was already active or it is freshly downloaded. This patch increases the priority of these messages. Signed-off-by:
Cathy Luo <cluo@marvell.com> Signed-off-by:
-
Amitkumar Karwar authored
As we are releasing the lock, during next iteration we may end up getting page fault if other thread has already deleted that node. Signed-off-by:
-
Amitkumar Karwar authored
Wakeup pending wait queues in unload path. This will help to avoid soft lockup issues in corner cases. Signed-off-by:
-
Amitkumar Karwar authored
If host fails to wakeup the firmware, we will trigger card reset after 3 second timeout. Signed-off-by:
-
Marc Yang authored
200ms is the requirement to allow VDD1.1 and VDD1.8 to drop to have proper reset. Signed-off-by:
Marc Yang <yangyang@marvell.com> Signed-off-by:
-
Marc Yang authored
Workqueue needs to be flushed early when removing card, otherwise soft lockup issue may happen because main_process is triggered by interrupt while card is being removed. Signed-off-by:
-
Amitkumar Karwar authored
This flag is never set but checked at two places. We will get rid of this code. Signed-off-by:
-
Avinash Patil authored
This patch adds support to get number of BA streams supported information from FW. Some newer chips(e.g. 8897 series) support 4 BA streams for TX; so driver should not disallow BA stream setup just after 2 streams have been established. Signed-off-by:
-
Xinming Hu authored
This patch adds support for DMA alignment of 64 bytes for TX packets. Signed-off-by:
Xinming Hu <huxm@marvell.com> Signed-off-by:
-
Xinming Hu authored
This patch fixes memory corruption reported by community developer. "Memory corruption occurs in mwifiex_ret_802_11_key_material_v1() when a short command response is received without a key length causing non initialised memory to be interpreted as the key length resulting in a memcpy() overwriting the part of the driver's private data structure beyond the key area." For v1 key material API firmwares, there is no need to send command to delete WEP key. WEP encryption/decryption is controlled by mac_control command. This patch avoids sending key material command in del_key case. Reported-by:
Martin Fuzzey <mfuzzey@parkeon.com> Signed-off-by:
-
Avinash Patil authored
Enable the endian checks by default. Signed-off-by:
-
Arend van Spriel authored
This patch adds support for the bcm43340 and bcm43341 wireless chipsets. These two chipsets are identical from wireless parts perspective. As such they use the same firmware image. Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Rob Herring <rob.herring@linaro.org> Signed-off-by:
John Stultz <john.stultz@linaro.org> [arend@broadcom.com: squash to single commit, remove 43341 chipid] Reviewed-by:
-
Avinash Patil authored
This patch adds module parameter for auto deepsleep configuration. By default, module_param is 0 and auto deep sleep is enabled. If mwifiex driver is loaded with disable_auto_ds=1, deep sleep configuration would not be downloaded to FW and FW would not enter deepsleep upon initializing. Signed-off-by:
-
