- 12 Feb, 2024 22 commits
-
-
Luiz Angelo Daros de Luca authored
Some code can be shared between both interface modules (MDIO and SMI) and among variants. These interface functions migrated to a common module: - rtl83xx_lock - rtl83xx_unlock - rtl83xx_probe - rtl83xx_register_switch - rtl83xx_unregister_switch - rtl83xx_shutdown - rtl83xx_remove The reset during probe was moved to the end of the common probe. This way, we avoid a reset if anything else fails. Signed-off-by:
Luiz Angelo Daros de Luca <luizluca@gmail.com> Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Luiz Angelo Daros de Luca authored
Instead of copying values from the variant, we can keep a reference in realtek_priv. This is a preliminary change for sharing code betwen interfaces. It will allow to move most of the probe into a common module while still allow code specific to each interface to read variant fields. Signed-off-by:
Vladimir Oltean <olteanv@gmail.com> Reviewed-by:
Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by:
-
Luiz Angelo Daros de Luca authored
Previously, the interface modules realtek-smi and realtek-mdio served as a platform and an MDIO driver, respectively. Each interface module redundantly specified the same compatible strings for both variants and referenced symbols from the variants. Now, each variant module has been transformed into a unified driver serving both as a platform and an MDIO driver. This modification reverses the relationship between the interface and variant modules, with the variant module now utilizing symbols from the interface modules. Signed-off-by:
-
Luiz Angelo Daros de Luca authored
Create a namespace to group the exported symbols. Signed-off-by:
-
Luiz Angelo Daros de Luca authored
It was never used and never referenced. Signed-off-by:
Alvin Šipraga <alsi@bang-olufsen.dk> Reviewed-by:
-
Abhishek Chauhan authored
TSO and TBS cannot co-exist. TBS requires special descriptor to be allocated at bootup. Initialising Tx queues at probe to support TSO and TBS can help in allocating those resources at bootup. TX queues with TBS can support etf qdisc hw offload. This is similar to the patch raised by NXP commit 3b12ec8f ("net: stmmac: dwmac-imx: set TSO/TBS TX queues default settings") Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8775p-ride Signed-off-by:
Abhishek Chauhan <quic_abchauha@quicinc.com> Reviewed-by:
Jeff Johnson <quic_jjohnson@quicinc.com> Reviewed-by:
Andrew Halaney <ahalaney@redhat.com> Signed-off-by:
-
David S. Miller authored
Kui-Feng Lee says: ==================== Remove expired routes with a separated list of routes. This patchset is resent due to previous reverting. [1] FIB6 GC walks trees of fib6_tables to remove expired routes. Walking a tree can be expensive if the number of routes in a table is big, even if most of them are permanent. Checking routes in a separated list of routes having expiration will avoid this potential issue. Background ========== The size of a Linux IPv6 routing table can become a big problem if not managed appropriately. Now, Linux has a garbage collector to remove expired routes periodically. However, this may lead to a situation in which the routing path is blocked for a long period due to an excessive number of routes. For example, years ago, there is a commit c7bb4b89 ("ipv6: tcp: drop silly ICMPv6 packet too big messages"). The root cause is that malicious ICMPv6 packets were sent back for every small packet sent to them. These packets add routes with an expiration time that prompts the GC to periodically check all routes in the tables, including permanent ones. Why Route Expires ================= Users can add IPv6 routes with an expiration time manually. However, the Neighbor Discovery protocol may also generate routes that can expire. For example, Router Advertisement (RA) messages may create a default route with an expiration time. [RFC 4861] For IPv4, it is not possible to set an expiration time for a route, and there is no RA, so there is no need to worry about such issues. Create Routes with Expires ========================== You can create routes with expires with the command. For example, ip -6 route add 2001:b000:591::3 via fe80::5054:ff:fe12:3457 \ dev enp0s3 expires 30 The route that has been generated will be deleted automatically in 30 seconds. GC of FIB6 ========== The function called fib6_run_gc() is responsible for performing garbage collection (GC) for the Linux IPv6 stack. It checks for the expiration of every route by traversing the trees of routing tables. The time taken to traverse a routing table increases with its size. Holding the routing table lock during traversal is particularly undesirable. Therefore, it is preferable to keep the lock for the shortest possible duration. Solution ======== The cause of the issue is keeping the routing table locked during the traversal of large trees. To solve this problem, we can create a separate list of routes that have expiration. This will prevent GC from checking permanent routes. Result ====== We conducted a test to measure the execution times of fib6_gc_timer_cb() and observed that it enhances the GC of FIB6. During the test, we added permanent routes with the following numbers: 1000, 3000, 6000, and 9000. Additionally, we added a route with an expiration time. Here are the average execution times for the kernel without the patch. - 120020 ns with 1000 permanent routes - 308920 ns with 3000 ... - 581470 ns with 6000 ... - 855310 ns with 9000 ... The kernel with the patch consistently takes around 14000 ns to execute, regardless of the number of permanent routes that are installed. Majro changes from v5: - Force syncrhonize GC before query expired routes with "sysctl -wq net.ipv6.route.flush=1". Major changes from v4: - Fix the comment of fib6_add_gc_list(). Major changes from v3: - Move the checks of f6i->fib6_node to fib6_add_gc_list(). - Make spin_lock_bh() and spin_unlock_bh() stands out. - Explain the reason of the changes in the commit message of the patch 4. Major changes from v2: - Refactory the boilerplate checks in the test case. - check_rt_num() and check_rt_num_clean() Major changes from v1: - Reduce the numbers of routes (5) in the test cases to work with slow environments. Due to the failure on patchwork. - Remove systemd related commands in the test case. Major changes from the previous patchset [2]: - Split helpers. - fib6_set_expires() -> fib6_set_expires() and fib6_add_gc_list(). - fib6_clean_expires() -> fib6_clean_expires() and fib6_remove_gc_list(). - Fix rt6_add_dflt_router() to avoid racing of setting expires. - Remove unnecessary calling to fib6_clean_expires() in ip6_route_info_create(). - Add test cases of toggling routes between permanent and temporary and handling routes from RA messages. - Clean up routes by deleting the existing device and adding a new one. - Fix a potential issue in modify_prefix_route(). ==================== Signed-off-by:
-
Kui-Feng Lee authored
Add tests of changing permanent routes to temporary routes and the reversed case to make sure GC working correctly in these cases. Add tests for the temporary routes from RA. The existing device will be deleted between tests to remove all routes associated with it, so that the earlier tests don't mess up the later ones. Reviewed-by:
Hangbin Liu <liuhangbin@gmail.com> Reviewed-by:
David Ahern <dsahern@kernel.org> Tested-by:
Kui-Feng Lee <thinker.li@gmail.com> Signed-off-by:
-
Kui-Feng Lee authored
Make the decision to set or clean the expires of a route based on the RTF_EXPIRES flag, rather than the value of the "expires" argument. This patch doesn't make difference logically, but make inet6_addr_modify() and modify_prefix_route() consistent. The function inet6_addr_modify() is the only caller of modify_prefix_route(), and it passes the RTF_EXPIRES flag and an expiration value. The RTF_EXPIRES flag is turned on or off based on the value of valid_lft. The RTF_EXPIRES flag is turned on if valid_lft is a finite value (not infinite, not 0xffffffff). Even if valid_lft is 0, the RTF_EXPIRES flag remains on. The expiration value being passed is equal to the valid_lft value if the flag is on. However, if the valid_lft value is infinite, the expiration value becomes 0 and the RTF_EXPIRES flag is turned off. Despite this, modify_prefix_route() decides to set the expiration value if the received expiration value is not zero. This mixing of infinite and zero cases creates an inconsistency. Reviewed-by:
-
Kui-Feng Lee authored
FIB6 GC walks trees of fib6_tables to remove expired routes. Walking a tree can be expensive if the number of routes in a table is big, even if most of them are permanent. Checking routes in a separated list of routes having expiration will avoid this potential issue. Reviewed-by:
-
Kui-Feng Lee authored
The route here is newly created. It is unnecessary to call fib6_clean_expires() on it. Suggested-by:
Eric Dumazet <edumazet@google.com> Reviewed-by:
-
Kui-Feng Lee authored
Pass the duration of a lifetime (in seconds) to the function rt6_add_dflt_router() so that it can properly set the expiration time. The function ndisc_router_discovery() is the only one that calls rt6_add_dflt_router(), and it will later set the expiration time for the route created by rt6_add_dflt_router(). However, there is a gap of time between calling rt6_add_dflt_router() and setting the expiration time in ndisc_router_discovery(). During this period, there is a possibility that a new route may be removed from the routing table. By setting the correct expiration time in rt6_add_dflt_router(), we can prevent this from happening. The reason for setting RTF_EXPIRES in rt6_add_dflt_router() is to start the Garbage Collection (GC) timer, as it only activates when a route with RTF_EXPIRES is added to a table. Suggested-by:
-
Paolo Abeni authored
This test is time sensitive. It may fail on virtual machines and for debug builds. Similar to commit c41dfb0d ("selftests/net: ignore timing errors in so_txtime if KSFT_MACHINE_SLOW"), optionally suppress failure for timing errors (only). Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Reviewed-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
-
David S. Miller authored
Shinas Rasheed says: ==================== add octeon_ep_vf driver This driver implements networking functionality of Marvell's Octeon PCI Endpoint NIC VF. This driver support following devices: * Network controller: Cavium, Inc. Device b203 * Network controller: Cavium, Inc. Device b403 * Network controller: Cavium, Inc. Device b103 * Network controller: Cavium, Inc. Device b903 * Network controller: Cavium, Inc. Device ba03 * Network controller: Cavium, Inc. Device bc03 * Network controller: Cavium, Inc. Device bd03 Changes: V7: - Separated octep_vf_get_if_stats from octep_vf_main.h to later patch in [1/8] - Moved introducing ndo_ops from [3/8] to [5/8] V6: https://lore.kernel.org/all/20240207065207.3092004-1-srasheed@marvell.com/ - Removed reuse of netif_tx_stop_all_queues, called implicitly in netif_tx_disable, when stopping netdev - Corrected error jump labels to have proper action-specific names in probe function - Removed singlethreaded workqueue implementation, since only tx timeout task is run. Run the same in the system workqueue - netdev_hold when tx_timeout happens to protect against free_netdev if race occurs between rmmod and a tx timeout. netdev_put the reference when timeout task ends to progress freeing netdev V5: https://lore.kernel.org/all/20240129050254.3047778-1-srasheed@marvell.com/ - Changed unchecked return types to void and removed unnecessary initializations in [2/8] patch. V4: https://lore.kernel.org/all/20240108124213.2966536-1-srasheed@marvell.com/ - Moved some stats from ethtool and added more to ndo_get_stats64 - Replaced code in IQ full check function to use helper from net/netdev_queues.h - Refactored code so that NETDEV_TX_BUSY is avoided V3: https://lore.kernel.org/all/20240105203823.2953604-1-srasheed@marvell.com/ - Removed UINT64_MAX, which is unused - Replaced masks and ULL declarations with GENMASK_ULL(), ULL() and other linux/bits.h macros, corrected declarations to conform to xmas tree format in patch [2/8] - Moved vfree and vzalloc null pointer casting corrections to patch [3/8], and corrected return values to follow standard kernel error codes in same - Set static budget of 64 for tx completion processing in NAPI - Replaces napi_complete and build_skb APIs to napi_complete_done and napi_build_skb APIs respectively - Replaced code with helper from net/netdev_queues.h to wake queues in TX completion processing - Removed duplicate reporting of TX/RX packets/bytes, which is already done during ndo_get_stats64 V2: https://lore.kernel.org/all/20231223134000.2906144-1-srasheed@marvell.com/ - Removed linux/version.h header file from inclusion in octep_vf_main.c - Corrected Makefile entry to include building octep_vf_mbox.c in [6/8] patch. - Removed redundant vzalloc pointer cast and vfree pointer check in [6/8] patch. V1: https://lore.kernel.org/all/20231221092844.2885872-1-srasheed@marvell.com/ ==================== Signed-off-by: -
Shinas Rasheed authored
add MAINTAINERS for octeon_ep_vf driver. Signed-off-by:
Shinas Rasheed <srasheed@marvell.com> Signed-off-by:
-
Shinas Rasheed authored
Add support for the following ethtool commands: ethtool -i|--driver devname ethtool devname ethtool -S|--statistics devname Signed-off-by:
-
Shinas Rasheed authored
Add support to enable MSI-x and register interrupts. Add support to process Tx and Rx traffic. Includes processing Tx completions and Rx refill. Signed-off-by:
-
Shinas Rasheed authored
Add support for ndo ops to set MAC address, change MTU, get stats. Add control path support to set MAC address, change MTU, get stats, set speed, get and set link mode. Signed-off-by:
-
Shinas Rasheed authored
Implement Tx/Rx ring resource allocation and cleanup. Signed-off-by:
-
Shinas Rasheed authored
Implement VF-PF mailbox to send all control commands from VF to PF and receive responses and notifications from PF to VF. Signed-off-by:
-
Shinas Rasheed authored
Implement hardware resource init and shutdown helper APIs, like hardware Tx/Rx queue init/enable/disable/reset. Signed-off-by:
-
Shinas Rasheed authored
Add driver framework and device setup and initialization for Octeon PCI Endpoint NIC VF. Add implementation to load module, initialize, register network device, cleanup and unload module. Signed-off-by:
-
- 10 Feb, 2024 11 commits
-
-
David S. Miller authored
Christian Marangi says: ==================== net: phy: Introduce PHY Package concept Idea of this big series is to introduce the concept of PHY package in DT and give PHY drivers a way to derive the base address from DT. The concept of PHY package is nothing new and is already a thing in the kernel with the API phy_package_join/leave/read/write. What is currently lacking is describing this in DT and better reference a base address to calculate offset from. In the scenario of a PHY package where multiple address are used and there isn't a way to get the base address of the PHY package from some regs, getting the information from DT is the only way. A possible example to this problem is this: ethernet-phy-package@0 { compatible = "qcom,qca8075-package"; #address-cells = <1>; #size-cells = <0>; reg = <0>; qcom,package-mode = "qsgmii"; ethernet-phy@1 { reg = <1>; }; phy4: ethernet-phy@4 { reg = <4>; }; }; The mdio parse functions are changed to address for this additional special node, the function is changed to simply detect this node and search also in this. (we match the node name to be "ethernet-phy-package") PHY driver can then use introduced helper of_phy_package_join to join the PHY to the PHY package and derive the base address from DT. Changes v7: - Rebase on top of net-next - Add Reviewed-by tag for DT patch - Change tx-driver-strength to tx-drive-strength - Drop driver reference in DT Changes v6: - Back to absolute PHY implementation - Correctly drop refcount for node on error condition and on PHY leave - Drop DT include patch in favor for 3 boolean vendor property - Fix Documentation problem for compatible and missing type and description - Drop redundand gpio-controller dependency and description - Skip scanphy with invalid PHY Package node and make reg mandatory - Rework fiber read status to use more generic function - Split qca808x LED generalization patch to permit easier review - Correctly return -EINVAL with wrong data passed to vendor property - Drop removing LED ops for qca807x PHY driver with gpio-controller Changes v5: - Rebase on top of net-next - Change implementation to base addr + offset in subnode - Adapt to all the changes and cleanup done to at803x Changes v4: - Rework DT implementation - Drop of autojoin support and rework to simple helper - Rework PHY driver to the new implementation - Add compatible for qca807x package - Further cleanup patches Changes v3: - Add back compatible implementation - Detach patch that can be handled separately (phy_package_mmd, phy_package extended) - Rework code to new simplified implementation with base addr + offset - Improve documentation with additional info and description Changes v2: - Drop compatible "ethernet-phy-package", use node name prefix matching instead - Improve DT example - Add reg for ethernet-phy-package - Drop phy-mode for ethernet-phy-package - Drop patch for generalization of phy-mode - Drop global-phy property (handle internally to the PHY driver) - Rework OF phy package code and PHY driver to handle base address - Fix missing of_node_put - Add some missing docs for added variables in struct - Move some define from dt-bindings include to PHY driver - Handle qsgmii validation in PHY driver - Fix wrong include for gpiolib - Drop reduntant version.h include ==================== Signed-off-by: -
Christian Marangi authored
QCA8072/5 have up to 2 LEDs attached for PHY. LEDs can be configured to be ON/hw blink or be set to HW control. Hw blink mode is set to blink at 4Hz or 250ms. PHY can support both copper (TP) or fiber (FIBRE) kind and supports different HW control modes based on the port type. HW control modes supported for netdev trigger for copper ports are: - LINK_10 - LINK_100 - LINK_1000 - TX - RX - FULL_DUPLEX - HALF_DUPLEX HW control modes supported for netdev trigger for fiber ports are: - LINK_100 - LINK_1000 - TX - RX - FULL_DUPLEX - HALF_DUPLEX LED support conflicts with GPIO controller feature and must be disabled if gpio-controller is used for the PHY. Signed-off-by:
Christian Marangi <ansuelsmth@gmail.com> Signed-off-by:
-
Christian Marangi authored
Generalize some qca808x LED functions in preparation for qca807x LED support. The LED implementation of qca808x and qca807x is the same but qca807x supports also Fiber port and have different hw control bits for Fiber port. To limit code duplication introduce micro functions that takes reg instead of LED index to tweak all the supported LED modes. Signed-off-by:
-
Christian Marangi authored
The LED implementation of qca808x and qca807x is the same but qca807x supports also Fiber port and have different hw control bits for Fiber port. In preparation for qca807x introduction, move all the common define to shared header. Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Robert Marko authored
This adds driver for the Qualcomm QCA8072 and QCA8075 PHY-s. They are 2 or 5 port IEEE 802.3 clause 22 compliant 10BASE-Te, 100BASE-TX and 1000BASE-T PHY-s. They feature 2 SerDes, one for PSGMII or QSGMII connection with MAC, while second one is SGMII for connection to MAC or fiber. Both models have a combo port that supports 1000BASE-X and 100BASE-FX fiber. PHY package can be configured in 3 mode following this table: First Serdes mode Second Serdes mode Option 1 PSGMII for copper Disabled ports 0-4 Option 2 PSGMII for copper 1000BASE-X / 100BASE-FX ports 0-4 Option 3 QSGMII for copper SGMII for ports 0-3 copper port 4 Each PHY inside of QCA807x series has 4 digitally controlled output only pins that natively drive LED-s. But some vendors used these to driver generic LED-s controlled by userspace, so lets enable registering each PHY as GPIO controller and add driver for it. These are commonly used in Qualcomm IPQ40xx, IPQ60xx and IPQ807x boards. Co-developed-by:Robert Marko <robert.marko@sartura.hr> Signed-off-by:
-
Christian Marangi authored
Some PHY driver might require additional regs call after genphy_c37_read_status() is called. Expand genphy_c37_read_status to provide a bool wheather the link has changed or not to permit PHY driver to skip additional regs call if nothing has changed. Every user of genphy_c37_read_status() is updated with the new additional bool. Signed-off-by:
-
Christian Marangi authored
Document Qcom QCA807x PHY package. Qualcomm QCA807X Ethernet PHY is PHY package of 2 or 5 IEEE 802.3 clause 22 compliant 10BASE-Te, 100BASE-TX and 1000BASE-T PHY-s. Document the required property to make the PHY package correctly configure and work. Signed-off-by:
Conor Dooley <conor.dooley@microchip.com> Reviewed-by:
-
Christian Marangi authored
Move more function to shared library in preparation for introduction of new PHY Family qca807x that will make use of both functions from at803x and qca808x as it's a transition PHY with some implementation of at803x and some from the new qca808x. Signed-off-by:
-
Christian Marangi authored
Add devm/of_phy_package_join helper to join PHYs in a PHY package. These are variant of the manual phy_package_join with the difference that these will use DT nodes to derive the base_addr instead of manually passing an hardcoded value. An additional value is added in phy_package_shared, "np" to reference the PHY package node pointer in specific PHY driver probe_once and config_init_once functions to make use of additional specific properties defined in the PHY package node in DT. The np value is filled only with of_phy_package_join if a valid PHY package node is found. A valid PHY package node must have the node name set to "ethernet-phy-package". Signed-off-by:
-
Christian Marangi authored
Add support for scanning PHY in PHY package nodes. PHY packages nodes are just container for actual PHY on the MDIO bus. Their PHY address defined in the PHY package node are absolute and reflect the address on the MDIO bus. mdio_bus.c and of_mdio.c is updated to now support and parse also PHY package subnode by checking if the node name match "ethernet-phy-package". As PHY package reg is mandatory and each PHY in the PHY package must have a reg, every invalid PHY Package node is ignored and will be skipped by the autoscan fallback. Signed-off-by:
-
Christian Marangi authored
Document ethernet PHY package nodes used to describe PHY shipped in bundle of 2-5 PHY. The special node describe a container of PHY that share common properties. This is a generic schema and PHY package should create specialized version with the required additional shared properties. Example are PHY packages that have some regs only in one PHY of the package and will affect every other PHY in the package, for example related to PHY interface mode calibration or global PHY mode selection. The PHY package node MUST declare the base address used by the PHY driver for global configuration by calculating the offsets of the global PHY based on the base address of the PHY package. Each reg of the PHYs defined in the PHY package node is absolute and describe the real address of the Ethernet PHY on the bus. Signed-off-by:
-
- 09 Feb, 2024 7 commits
-
-
Heiner Kallweit authored
Use generic MDIO helpers to simplify the code. Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by:
Jakub Kicinski <kuba@kernel.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queueJakub Kicinski authored
Tony Nguyen says: ==================== igc: ethtool: Flex filter cleanup Kurt Kanzenbach says: This series contains some cosmetics for the flex filter code. The fixes have been merged separately via -net already. * '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: igc: Unify filtering rule fields igc: Use netdev printing functions for flex filters igc: Use reverse xmas tree ==================== Link: https://lore.kernel.org/r/20240207191656.1250777-1-anthony.l.nguyen@intel.comSigned-off-by:
-
Jakub Sitnicki authored
udpgso regression test configures routing and device MTU directly through uAPI (Netlink, ioctl) to do its job. While there is nothing wrong with it, it takes more effort than doing it from shell. Looking forward, we would like to extend the udpgso regression tests to cover the EIO corner case [1], once it gets addressed. That will require a dummy device and device feature manipulation to set it up. Which means more Netlink code. So, in preparation, pull out network configuration into the shell script part of the test, so it is easily extendable in the future. Also, because it now easy to setup routing, add a second local IPv6 address. Because the second address is not managed by the kernel, we can "replace" the corresponding local route with a reduced-MTU one. This unblocks the disabled "ipv6 connected" test case. Add a similar setup for IPv4 for symmetry. [1] https://lore.kernel.org/netdev/87jzqsld6q.fsf@cloudflare.com/Reviewed-by:
Jakub Sitnicki <jakub@cloudflare.com> Link: https://lore.kernel.org/r/20240207-jakub-krn-635-v3-1-3dfa3da8a7d3@cloudflare.comSigned-off-by:
-
Heiner Kallweit authored
Convert EEE handling to use linkmode bitmaps. This prepares for removing the legacy bitmaps from struct ethtool_keee. No functional change intended. Reviewed-by:
-
Heiner Kallweit authored
Convert EEE handling to use linkmode bitmaps. This prepares for removing the legacy bitmaps from struct ethtool_keee. No functional change intended. Signed-off-by:
-
Heiner Kallweit authored
After 3a2746320403 ("leds: trigger: netdev: Display only supported link speed attribute") the check for valid link modes can be simplified. In addition factor it out, so that it can be re-used by the upcoming LED support for RTL8125. Signed-off-by:Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/8876a9f4-7a2d-48c3-8eae-0d834f5c27c5@gmail.comSigned-off-by:
-
Paolo Abeni authored
The altnames test uses the forwarding/lib.sh and that dependency currently causes failures when running the test after install: make -C tools/testing/selftests/ TARGETS=net install ./tools/testing/selftests/kselftest_install/run_kselftest.sh \ -t net:altnames.sh # ... # ./altnames.sh: line 8: ./forwarding/lib.sh: No such file or directory # RTNETLINK answers: Operation not permitted # ./altnames.sh: line 73: tests_run: command not found # ./altnames.sh: line 65: pre_cleanup: command not found Address the issue leveraging the TEST_INCLUDES infrastructure provided by commit 2a0683be ("selftests: Introduce Makefile variable to list shared bash scripts") Signed-off-by:
-
