Pull audit patches from Paul Moore:
 "Twelve audit patches for v4.19 and they run the full gamut from fixes
  to features.

  Notable changes include the ability to use the "exe" audit filter
  field in a wider variety of filter types, a fix for our comparison of
  GID/EGID in audit filter rules, better association of related audit
  records (connecting related audit records together into one audit
  event), and a fix for a potential use-after-free in audit_add_watch().

  All the patches pass the audit-testsuite and merge cleanly on your
  current master branch"

* tag 'audit-pr-20180814' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
  audit: fix use-after-free in audit_add_watch
  audit: use ktime_get_coarse_real_ts64() for timestamps
  audit: use ktime_get_coarse_ts64() for time access
  audit: simplify audit_enabled check in audit_watch_log_rule_change()
  audit: check audit_enabled in audit_tree_log_remove_rule()
  cred: conditionally declare groups-related functions
  audit: eliminate audit_enabled magic number comparison
  audit: rename FILTER_TYPE to FILTER_EXCLUDE
  audit: Fix extended comparison of GID/EGID
  audit: tie ANOM_ABEND records to syscall
  audit: tie SECCOMP records to syscall
  audit: allow other filter list types for AUDIT_EXE

Pull SELinux updates from Paul Moore:
 "There are 16 patches in here but really only one that is of any
  significance. That one patch is by nixiaoming and fixes a few places
  where we were not properly cleaning up dentry and inode objects in the
  selinuxfs error handling code. The rest are either printk->pr_*
  conversions, constification tweaks, and a minor tweak to MAINTAINERS.

  Everything passes the selinux-testsuite and looks to merge cleanly
  against your master branch"

* tag 'selinux-pr-20180814' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
  selinux: cleanup dentry and inodes on error in selinuxfs
  selinux: constify write_op[]
  selinux: Cleanup printk logging in netnode
  selinux: Cleanup printk logging in avc
  selinux: Cleanup printk logging in netif
  selinux: Cleanup printk logging in netport
  selinux: Cleanup printk logging in sidtab
  selinux: Cleanup printk logging in netlink
  selinux: Cleanup printk logging in selinuxfs
  selinux: Cleanup printk logging in services
  selinux: Cleanup printk logging in avtab
  selinux: Cleanup printk logging in hooks
  selinux: Cleanup printk logging in policydb
  selinux: Cleanup printk logging in ebitmap
  selinux: Cleanup printk logging in conditional
  MAINTAINERS: update the LSM and SELinux subsystems

Pull security subsystem updates from James Morris:

 - kstrdup() return value fix from Eric Biggers

 - Add new security_load_data hook to differentiate security checking of
   kernel-loaded binaries in the case of there being no associated file
   descriptor, from Mimi Zohar.

 - Add ability to IMA to specify a policy at build-time, rather than
   just via command line params or by loading a custom policy, from
   Mimi.

 - Allow IMA and LSMs to prevent sysfs firmware load fallback (e.g. if
   using signed firmware), from Mimi.

 - Allow IMA to deny loading of kexec kernel images, as they cannot be
   measured by IMA, from Mimi.

* 'next-general' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  security: check for kstrdup() failure in lsm_append()
  security: export security_kernel_load_data function
  ima: based on policy warn about loading firmware (pre-allocated buffer)
  module: replace the existing LSM hook in init_module
  ima: add build time policy
  ima: based on policy require signed firmware (sysfs fallback)
  firmware: add call to LSM hook before firmware sysfs fallback
  ima: based on policy require signed kexec kernel images
  kexec: add call to LSM hook in original kexec_load syscall
  security: define new LSM hook named security_kernel_load_data
  MAINTAINERS: remove the outdated "LINUX SECURITY MODULE (LSM) FRAMEWORK" entry

allmodconfig+CONFIG_INTEL_KVM=n results in the following build error.

  ERROR: "l1tf_vmx_mitigation" [arch/x86/kvm/kvm.ko] undefined!

Fixes: 5b76a3cf ("KVM: VMX: Tell the nested hypervisor to skip L1D flush on vmentry")
Reported-by: Meelis Roos <mroos@linux.ee>
Cc: Meelis Roos <mroos@linux.ee>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull pstore update from Kees Cook:
 "This cycle has been very quiet for pstore: the only change is adding
  awareness of the zstd compression method"

* tag 'pstore-v4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  pstore: add zstd compression support

Pull hardened usercopy updates from Kees Cook:
 "This cleans up a minor Kconfig issue and adds a kernel boot option for
  disabling hardened usercopy for distro users that may have corner-case
  performance issues (e.g. high bandwidth small-packet UDP traffic).

  Summary:

   - drop unneeded Kconfig "select BUG" (Kamal Mostafa)

   - add "hardened_usercopy=off" rare performance needs (Chris von
     Recklinghausen)"

* tag 'hardened-usercopy-v4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  usercopy: Allow boot cmdline disabling of hardening
  usercopy: Do not select BUG with HARDENED_USERCOPY

Pull xen updates from Juergen Gross:

 - add dma-buf functionality to Xen grant table handling

 - fix for booting the kernel as Xen PVH dom0

 - fix for booting the kernel as a Xen PV guest with
   CONFIG_DEBUG_VIRTUAL enabled

 - other minor performance and style fixes

* tag 'for-linus-4.19-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen/balloon: fix balloon initialization for PVH Dom0
  xen: don't use privcmd_call() from xen_mc_flush()
  xen/pv: Call get_cpu_address_sizes to set x86_virt/phys_bits
  xen/biomerge: Use true and false for boolean values
  xen/gntdev: don't dereference a null gntdev_dmabuf on allocation failure
  xen/spinlock: Don't use pvqspinlock if only 1 vCPU
  xen/gntdev: Implement dma-buf import functionality
  xen/gntdev: Implement dma-buf export functionality
  xen/gntdev: Add initial support for dma-buf UAPI
  xen/gntdev: Make private routines/structures accessible
  xen/gntdev: Allow mappings for DMA buffers
  xen/grant-table: Allow allocating buffers suitable for DMA
  xen/balloon: Share common memory reservation routines
  xen/grant-table: Make set/clear page private code shared

Pull arm64 updates from Will Deacon:
 "A bunch of good stuff in here. Worth noting is that we've pulled in
  the x86/mm branch from -tip so that we can make use of the core
  ioremap changes which allow us to put down huge mappings in the
  vmalloc area without screwing up the TLB. Much of the positive
  diffstat is because of the rseq selftest for arm64.

  Summary:

   - Wire up support for qspinlock, replacing our trusty ticket lock
     code

   - Add an IPI to flush_icache_range() to ensure that stale
     instructions fetched into the pipeline are discarded along with the
     I-cache lines

   - Support for the GCC "stackleak" plugin

   - Support for restartable sequences, plus an arm64 port for the
     selftest

   - Kexec/kdump support on systems booting with ACPI

   - Rewrite of our syscall entry code in C, which allows us to zero the
     GPRs on entry from userspace

   - Support for chained PMU counters, allowing 64-bit event counters to
     be constructed on current CPUs

   - Ensure scheduler topology information is kept up-to-date with CPU
     hotplug events

   - Re-enable support for huge vmalloc/IO mappings now that the core
     code has the correct hooks to use break-before-make sequences

   - Miscellaneous, non-critical fixes and cleanups"

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (90 commits)
  arm64: alternative: Use true and false for boolean values
  arm64: kexec: Add comment to explain use of __flush_icache_range()
  arm64: sdei: Mark sdei stack helper functions as static
  arm64, kaslr: export offset in VMCOREINFO ELF notes
  arm64: perf: Add cap_user_time aarch64
  efi/libstub: Only disable stackleak plugin for arm64
  arm64: drop unused kernel_neon_begin_partial() macro
  arm64: kexec: machine_kexec should call __flush_icache_range
  arm64: svc: Ensure hardirq tracing is updated before return
  arm64: mm: Export __sync_icache_dcache() for xen-privcmd
  drivers/perf: arm-ccn: Use devm_ioremap_resource() to map memory
  arm64: Add support for STACKLEAK gcc plugin
  arm64: Add stack information to on_accessible_stack
  drivers/perf: hisi: update the sccl_id/ccl_id when MT is supported
  arm64: fix ACPI dependencies
  rseq/selftests: Add support for arm64
  arm64: acpi: fix alignment fault in accessing ACPI
  efi/arm: map UEFI memory map even w/o runtime services enabled
  efi/arm: preserve early mapping of UEFI memory map longer for BGRT
  drivers: acpi: add dependency of EFI for arm64
  ...

The function has an inline "return false;" definition with CONFIG_SMP=n
but the "real" definition is also visible leading to "redefinition of
‘apic_id_is_primary_thread’" compiler error.

Guard it with #ifdef CONFIG_SMP
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Fixes: 6a4d2657 ("x86/smp: Provide topology_is_primary_thread()")
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit 0cc3cd21 ("cpu/hotplug: Boot HT siblings at least once")
breaks non-SMP builds.

[ I suspect the 'bool' fields should just be made to be bitfields and be
  exposed regardless of configuration, but that's a separate cleanup
  that I'll leave to the owners of this file for later.   - Linus ]

Fixes: 0cc3cd21 ("cpu/hotplug: Boot HT siblings at least once")
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Abel Vesa <abelvesa@linux.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull documentation update from Jonathan Corbet:
 "This was a moderately busy cycle for docs, with the usual collection
  of small fixes and updates.

  We also have new ktime_get_*() docs from Arnd, some kernel-doc fixes,
  a new set of Italian translations (non so se vale la pena, ma non fa
  male - speriamo bene), and some extensive early memory-management
  documentation improvements from Mike Rapoport"

* tag 'docs-4.19' of git://git.lwn.net/linux: (52 commits)
  Documentation: corrections to console/console.txt
  Documentation: add ioctl number entry for v4l2-subdev.h
  Remove gendered language from management style documentation
  scripts/kernel-doc: Escape all literal braces in regexes
  docs/mm: add description of boot time memory management
  docs/mm: memblock: add overview documentation
  docs/mm: memblock: add kernel-doc description for memblock types
  docs/mm: memblock: add kernel-doc comments for memblock_add[_node]
  docs/mm: memblock: update kernel-doc comments
  mm/memblock: add a name for memblock flags enumeration
  docs/mm: bootmem: add overview documentation
  docs/mm: bootmem: add kernel-doc description of 'struct bootmem_data'
  docs/mm: bootmem: fix kernel-doc warnings
  docs/mm: nobootmem: fixup kernel-doc comments
  mm/bootmem: drop duplicated kernel-doc comments
  Documentation: vm.txt: Adding 'nr_hugepages_mempolicy' parameter description.
  doc:it_IT: translation for kernel-hacking
  docs: Fix the reference labels in Locking.rst
  doc: tracing: Fix a typo of trace_stat
  mm: Introduce new type vm_fault_t
  ...

Pull sound updates from Takashi Iwai:
 "It's been busy summer weeks and hence lots of changes, partly for a
  few new drivers and partly for a wide range of fixes.

  Here are highlights:

  ALSA Core:
   - Fix rawmidi buffer management, code cleanup / refactoring
   - Fix the SG-buffer page handling with incorrect fallback size
   - Fix the stall at virmidi trigger callback with a large buffer; also
     offloading and code-refactoring along with it
   - Various ALSA sequencer code cleanups

  ASoC:
   - Deploy the standard snd_pcm_stop_xrun() helper in several drivers
   - Support for providing name prefixes to generic component nodes
   - Quite a few fixes for DPCM as it gains a bit wider use and more
     robust testing
   - Generalization of the DIO2125 support to a simple amplifier driver
   - Accessory detection support for the audio graph card
   - DT support for PXA AC'97 devices
   - Quirks for a number of new x86 systems
   - Support for AM Logic Meson, Everest ES7154, Intel systems with
     RT5682, Qualcomm QDSP6 and WCD9335, Realtek RT5682 and TI TAS5707

  HD-audio:
   - Code refactoring in HD-audio ext codec codes to drop own classes;
     preliminary works for the upcoming legacy codec support
   - Generalized DRM audio component for the upcoming radeon / amdgpu
     support
   - Unification of mic mute-LED and GPIO support for various codecs
   - Further improvement of CA0132 codec support including Recon3D
   - Proper vga_switcheroo handling for AMD i-GPU
   - Update of model list in documentation
   - Fixups for another HP Spectre x360, Conexant codecs, power-save
     blacklist update

  USB-audio:
   - Fix the invalid sample rate setup with external clock
   - Support of UAC3 selector units and processing units
   - Basic UAC3 power-domain support
   - Support for Encore mDSD and Thesycon-based DSD devices
   - Preparation for future complete callback changes

  Firewire:
   - Add support for MOTU Traveler

  Misc:
   - The endianess notation fixes in various drivers
   - Add fall-through comment in lots of drivers
   - Various sparse warning fixes, e.g. about PCM format types"

* tag 'sound-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (529 commits)
  ASoC: adav80x: mark expected switch fall-through
  ASoC: da7219: Add delays to capture path to remove DC offset noise
  ALSA: usb-audio: Mark expected switch fall-through
  ALSA: mixart: Mark expected switch fall-through
  ALSA: opl3: Mark expected switch fall-through
  ALSA: hda/ca0132 - Add exit commands for Recon3D
  ALSA: hda/ca0132 - Change mixer controls for Recon3D
  ALSA: hda/ca0132 - Add Recon3D input and output select commands
  ALSA: hda/ca0132 - Add DSP setup defaults for Recon3D
  ALSA: hda/ca0132 - Add Recon3D startup functions and setup
  ALSA: hda/ca0132 - Add bool variable to enable/disable pci region2 mmio
  ALSA: hda/ca0132 - Add Recon3D pincfg
  ALSA: hda/ca0132 - Add quirk ID and enum for Recon3D
  ALSA: hda/ca0132 - Add alt_functions unsolicited response
  ALSA: hda/ca0132 - Clean up ca0132_init function.
  ALSA: hda/ca0132 - Create mmio gpio function to make code clearer
  ASoC: wm_adsp: Make DSP name configurable by codec driver
  ASoC: wm_adsp: Declare firmware controls from codec driver
  ASoC: max98373: Added software reset register to readable registers
  ASoC: wm_adsp: Correct DSP pointer for preloader control
  ...

Pull ACPI updates from Rafael Wysocki:
 "These revert two ACPICA commits that are not needed any more, rework
  the property graphs support in ACPI to be more aligned with the
  analogous DT code, add some new quirks and remove one that isn't
  needed any more, add a special platform driver to enumerate multiple
  I2C devices hooked up to the same device object in the ACPI tables and
  update the battery and button drivers.

  Specifics:

   - Revert two ACPICA commits that are not needed any more (Erik
     Schmauss).

   - Rework property graph support in the ACPI device properties
     framework to make it behave more like the analogous DT code and
     update the documentation of it (Sakari Ailus).

   - Change the default ACPI device status after initialization to
     ACPI_STA_DEFAULT instead of 0 (Hans de Goede).

   - Add a special platform driver for enumerating multiple I2C devices
     hooked up to the same object in the ACPI tables (Hans de Goede).

   - Fix the ACPI battery driver to avoid reporting full capacity on
     systems without support for that and clean it up (Hans de Goede,
     Dmitry Rozhkov, Lucas Rangit Magasweran).

   - Add two system wakeup quirks to the ACPI EC driver (Aaron Ma, Mika
     Westerberg).

   - Add the touchscreen on Dell Venue Pro 7139 to the list of "always
     present" devices to make it work (Tristian Celestin).

   - Revert a special tables handling quirk for Dell XPS 9570 and
     Precision M5530 which is not needed any more (Kai Heng Feng).

   - Add support for a new OEM _OSI string to allow system vendors to
     work around issues with NVidia HDMI audio (Alex Hung).

   - Prevent the ACPI button driver from reporting excessive system
     wakeup events and clean it up (Ravi Chandra Sadineni, Randy
     Dunlap).

   - Clean up two minor code style issues in the ACPI core and GHES
     handling on ARM64 (Dongjiu Geng, John Garry, Tom Todd)"

* tag 'acpi-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (34 commits)
  platform/x86: Add ACPI i2c-multi-instantiate pseudo driver
  ACPI / x86: utils: Remove status workaround from acpi_device_always_present()
  ACPI / scan: Create platform device for fwnodes with multiple i2c devices
  ACPI / scan: Initialize status to ACPI_STA_DEFAULT
  ACPI / EC: Add another entry for Thinkpad X1 Carbon 6th
  ACPI: bus: Fix a pointer coding style issue
  arm64 / ACPI: clean the additional checks before calling ghes_notify_sea()
  ACPI / scan: Add static attribute to indirect_io_hosts[]
  ACPI / battery: Do not export energy_full[_design] on devices without full_charge_capacity
  ACPI / EC: Use ec_no_wakeup on ThinkPad X1 Yoga 3rd
  ACPI / battery: get rid of negations in conditions
  ACPI / battery: use specialized print macros
  ACPI / battery: reorder headers alphabetically
  ACPI / battery: drop inclusion of init.h
  ACPI: battery: remove redundant old_present check on insertion
  ACPI: property: graph: Update graph documentation to use generic references
  ACPI: property: graph: Improve graph documentation for port/ep numbering
  ACPI: property: graph: Fix graph documentation
  ACPI: property: Update documentation for hierarchical data extension 1.1
  ACPI: property: Document key numbering for hierarchical data extension refs
  ...

Pull power management updates from Rafael Wysocki:
 "These add a new framework for CPU idle time injection, to be used by
  all of the idle injection code in the kernel in the future, fix some
  issues and add a number of relatively small extensions in multiple
  places.

  Specifics:

   - Add a new framework for CPU idle time injection (Daniel Lezcano).

   - Add AVS support to the armada-37xx cpufreq driver (Gregory
     CLEMENT).

   - Add support for current CPU frequency reporting to the ACPI CPPC
     cpufreq driver (George Cherian).

   - Rework the cooling device registration in the imx6q/thermal driver
     (Bastian Stender).

   - Make the pcc-cpufreq driver refuse to work with dynamic scaling
     governors on systems with many CPUs to avoid scalability issues
     with it (Rafael Wysocki).

   - Fix the intel_pstate driver to report different maximum CPU
     frequencies on systems where they really are different and to
     ignore the turbo active ratio if hardware-managend P-states (HWP)
     are in use; make it use the match_string() helper (Xie Yisheng,
     Srinivas Pandruvada).

   - Fix a minor deferred probe issue in the qcom-kryo cpufreq driver
     (Niklas Cassel).

   - Add a tracepoint for the tracking of frequency limits changes (from
     Andriod) to the cpufreq core (Ruchi Kandoi).

   - Fix a circular lock dependency between CPU hotplug and sysfs
     locking in the cpufreq core reported by lockdep (Waiman Long).

   - Avoid excessive error reports on driver registration failures in
     the ARM cpuidle driver (Sudeep Holla).

   - Add a new device links flag to the driver core to make links go
     away automatically on supplier driver removal (Vivek Gautam).

   - Eliminate potential race condition between system-wide power
     management transitions and system shutdown (Pingfan Liu).

   - Add a quirk to save NVS memory on system suspend for the ASUS 1025C
     laptop (Willy Tarreau).

   - Make more systems use suspend-to-idle (instead of ACPI S3) by
     default (Tristian Celestin).

   - Get rid of stack VLA usage in the low-level hibernation code on
     64-bit x86 (Kees Cook).

   - Fix error handling in the hibernation core and mark an expected
     fall-through switch in it (Chengguang Xu, Gustavo Silva).

   - Extend the generic power domains (genpd) framework to support
     attaching a device to a power domain by name (Ulf Hansson).

   - Fix device reference counting and user limits initialization in the
     devfreq core (Arvind Yadav, Matthias Kaehlcke).

   - Fix a few issues in the rk3399_dmc devfreq driver and improve its
     documentation (Enric Balletbo i Serra, Lin Huang, Nick Milner).

   - Drop a redundant error message from the exynos-ppmu devfreq driver
     (Markus Elfring)"

* tag 'pm-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (35 commits)
  PM / reboot: Eliminate race between reboot and suspend
  PM / hibernate: Mark expected switch fall-through
  cpufreq: intel_pstate: Ignore turbo active ratio in HWP
  cpufreq: Fix a circular lock dependency problem
  cpu/hotplug: Add a cpus_read_trylock() function
  x86/power/hibernate_64: Remove VLA usage
  cpufreq: trace frequency limits change
  cpufreq: intel_pstate: Show different max frequency with turbo 3 and HWP
  cpufreq: pcc-cpufreq: Disable dynamic scaling on many-CPU systems
  cpufreq: qcom-kryo: Silently error out on EPROBE_DEFER
  cpufreq / CPPC: Add cpuinfo_cur_freq support for CPPC
  cpufreq: armada-37xx: Add AVS support
  dt-bindings: marvell: Add documentation for the Armada 3700 AVS binding
  PM / devfreq: rk3399_dmc: Fix duplicated opp table on reload.
  PM / devfreq: Init user limits from OPP limits, not viceversa
  PM / devfreq: rk3399_dmc: fix spelling mistakes.
  PM / devfreq: rk3399_dmc: do not print error when get supply and clk defer.
  dt-bindings: devfreq: rk3399_dmc: move interrupts to be optional.
  PM / devfreq: rk3399_dmc: remove wait for dcf irq event.
  dt-bindings: clock: add rk3399 DDR3 standard speed bins.
  ...

Merge tag 'leds-for-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds

Pull LED updates from Jacek Anaszewski:
 "LED triggers improvements make the biggest part of this pull request.
  The most striking ones, that allowed for nice cleanups in the triggers
  are:

   - centralized handling of creation and removal of trigger sysfs
     attributes via attribute group

   - addition of module_led_trigger() helper

  The other things that need to be mentioned:

  New features and improvements to existing LED class drivers:

   - lt3593: add DT support, switch to gpiod interface

   - lm3692x: support LED sync configuration, change OF calls to fwnode
     calls

   - apu: modify PC Engines apu/apu2 driver to support apu3

  Change in the drivers/net/can/led.c:

   - mark led trigger as broken since it's in the way for the further
     cleanups. It implements a subset of the netdev trigger and an Ack
     is needed from someone who can actually test and confirm that the
     netdev trigger works for can devices"

* tag 'leds-for-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds: (32 commits)
  leds: ns2: Change unsigned to unsigned int
  usb: simplify usbport trigger
  leds: gpio trigger: simplifications from core changes
  leds: backlight trigger: simplifications from core changes
  leds: activity trigger: simplifications from core changes
  leds: default-on trigger: make use of module_led_trigger()
  leds: heartbeat trigger: simplifications from core changes
  leds: oneshot trigger: simplifications from core changes
  leds: transient trigger: simplifications from core changes
  leds: timer trigger: simplifications from core changes
  leds: netdev trigger: simplifications from core changes
  leds: triggers: new function led_set_trigger_data()
  leds: triggers: define module_led_trigger helper
  leds: triggers: handle .trigger_data and .activated() in the core
  leds: triggers: add device attribute support
  leds: triggers: let struct led_trigger::activate() return an error code
  leds: triggers: make the MODULE_LICENSE string match the actual license
  leds: lm3692x: Support LED sync configuration
  dt: bindings: lm3692x: Update binding for LED sync control
  leds: lm3692x: Change DT calls to fwnode calls
  ...

Pull Devicetree updates from Rob Herring:

 - Remove an obsolete hack for PPC32 longtrail systems

 - Make of_io_request_and_map() "name" arg optional

 - Add vendor prefixes for bitmain, Asus, and Y Soft

 - Remove 'interrupt-parent' from bindings as it is implicit

 - New properties for wm8994 audio codec

 - Add 'clocks' property support to SRAM binding

 - Add binding for ASPEED coprocessor interrupt controller

 - Various binding spelling and link fixes

* tag 'devicetree-for-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  Documentation: remove dynamic-resolution-notes reference to non-existent file
  dt-bindings: Add Y Soft Corporation vendor prefix
  of/fdt: Remove PPC32 longtrail hack in memory scan
  dt-bindings: remove 'interrupt-parent' from bindings
  pinctrl: tegra: fix spelling in devicetree binding document
  usb: dwc3: rockchip: Fix PHY documentation links.
  dt-bindings: sound: wm8994: document wlf,csnaddr-pd property
  dt-bindings: sound: wm8994: document wlf,spkmode-pu property
  dt-bindings: sram: Add 'clocks' as an optional property
  dt-bindings: Add vendor prefix for AsusTek Computer Inc.
  dt-bindings: misc: ASPEED coprocessor interrupt controller
  dt-bindings: gpio: pca953x: Document interrupts, update example
  drivers/of: Make of_io_request_and_map() "name" argument optional
  dt-bindings: Add bitmain vendor prefix
  Documentation: devicetree: tilcdc: fix spelling mistake "suppors" -> "supports"

Pull pin control updates from Linus Walleij:
 "This is the bulk of pin control changes for v4.19:

  Core changes:

   - Augment pinctrl_generic_add_group() and pinmux_generic_add_function()
     to return the selector for the added group/function to the caller
     and augment (hopefully) all drivers to handle this

  New subdrivers:

   - Qualcomm PM8998 and PM8005 are supported in the SPMI pin control
     and GPIO driver

   - Intel Ice Lake PCH (platform controller hub) support

   - NXP (ex Freescale) i.MX8MQ support

   - Berlin AS370 support

  Improvements to drivers:

   - Support interrupts on the Ocelot pin controller

   - Add SPI pins to the Uniphier driver

   - Define a GPIO compatible per SoC in the Tegra driver

   - Push Tegra initialization down in the initlevels

   - Support external wakeup interrupts on the Exynos

   - Add generic clocks pins to the meson driver

   - Add USB and HSCIF pins for some Renesas PFC chips

   - Suspend/resume support in the armada-37xx

   - Interrupt support for the Actions Semiconductor S900 also known as
     "owl"

   - Correct the pin ordering in Cedarfork

   - Debugfs output for INTF in the mcp23s08 driver

   - Avoid divisions in context save/restore in pinctrl-single

  The rest is minor bug fixes or cleanups"

* tag 'pinctrl-v4.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (69 commits)
  pinctrl: nomadik: silence uninitialized variable warning
  pinctrl: axp209: Fix NULL pointer dereference after allocation
  pinctrl: samsung: Remove duplicated "wakeup" in printk
  pinctrl: ocelot: add support for interrupt controller
  pinctrl: intel: Don't shadow error code of gpiochip_lock_as_irq()
  pinctrl: berlin: fix 'pctrl->functions' allocation in berlin_pinctrl_build_state
  gpio: tegra: Move driver registration to subsys_init level
  pinctrl: tegra: Move drivers registration to arch_init level
  pinctrl: baytrail: actually print the apparently misconfigured pin
  MAINTAINERS: Replace Heikki as maintainer of Intel pinctrl
  pinctrl: freescale: off by one in imx1_pinconf_group_dbg_show()
  pinctrl: uniphier: add spi pin-mux settings
  pinctrl: cannonlake: Fix community ordering for H variant
  pinctrl: tegra: define GPIO compatible node per SoC
  pinctrl: intel: Do pin translation when lock IRQ
  pinctrl: imx: off by one in imx_pinconf_group_dbg_show()
  pinctrl: mediatek: include chained_irq.h header
  pinctrl/amd: only handle irq if it is pending and unmasked
  pinctrl/amd: fix gpio irq level in debugfs
  pinctrl: stm32: add syscfg mask parameter
  ...

Pull regulator updates from Mark Brown:
 "The biggest set of changes in here is the addition of the Qualcomm
  RPMH driver. As well as the regualtor driver itself being quite large
  due to the usual involved Qualcomm regulator stuff there's also some
  code shared with the arm-soc tree, a bus driver required to
  communicate with the hardware that actually winds up being much larger
  than the regulator driver itself and a LLCC driver that was part of
  the same signed tag used with the arm-soc tree.

  Other than that it's a fairly standard and quiet release, highlights
  include:

   - Addition of device links from regulator consumers to their
     regulators, helping the core avoid dependency issues during
     suspend.

   - Support for the entertainingly innovative suspend implementation in
     the BD9571MWV.

   - Support for switch regulators on the PFUZE100, this required two
     goes due to backwards compatibility issues with old DTs that were
     discovered.

   - Support for Freescale PFUZE3001 and SocioNext UniPhier.

   - The aforementioned Qualcomm RPMH driver together with the driver
     changes required to support it"

* tag 'regulator-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (52 commits)
  regulator: add QCOM RPMh regulator driver
  regulator: dt-bindings: add QCOM RPMh regulator bindings
  regulator: samsung: Add SPDX license identifiers
  regulator: maxim: Add SPDX license identifiers
  regulator: bd71837: adobt MFD changes to regulator driver
  regulator: tps65217: Fix NULL pointer dereference on probe
  regulator: Add support for CPCAP regulators on Motorola Xoom devices.
  regulator: Add sw2_sw4 voltage table to cpcap regulator.
  regulator: bd9571mwv: Make symbol 'dev_attr_backup_mode' static
  regulator: pfuze100: add support to en-/disable switch regulators
  regulator: pfuze100: add optional disable switch-regulators binding
  soc: qcom: rmtfs-mem: fix memleak in probe error paths
  soc: qcom: llc-slice: Add missing MODULE_LICENSE()
  drivers: qcom: rpmh: fix unwanted error check for get_tcs_of_type()
  drivers: qcom: rpmh-rsc: fix the loop index check in get_req_from_tcs
  firmware: qcom: scm: add a dummy qcom_scm_assign_mem()
  drivers: qcom: rpmh-rsc: Check cmd_db_ready() to help children
  drivers: qcom: rpmh-rsc: allow active requests from wake TCS
  drivers: qcom: rpmh: add support for batch RPMH request
  drivers: qcom: rpmh: allow requests to be sent asynchronously
  ...

Pull spi updates from Mark Brown:
 "Quite an active release for the SPI subsystem, lots of small updates
  and fixes scattered about with highlights including:

   - 3-wire support in the GPIO driver.

   - support for setting a custom memory name in the memory mapped flash
     drivers.

   - support for extended mode in the Freescale DSPI controller.

   - support for the non-standard integration with the Microsemi Ocelot
     platform in the DesignWare driver.

   - new driver for the SocioNext UniPhier"

* tag 'spi-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (47 commits)
  spi: davinci: fix a NULL pointer dereference
  spi: spi-mem: Constify spi_mem->name
  mtd: m25p80: Call spi_mem_get_name() to let controller set a custom name
  spi: spi-mem: Extend the SPI mem interface to set a custom memory name
  spi: spi-mem: Fix a typo in the documentation of struct spi_mem
  spi: uniphier: remove unnecessary include headers
  spi: spi-gpio: add SPI_3WIRE support
  spi: add flags parameter to txrx_word function pointers
  spi: add SPI controller driver for UniPhier SoC
  spi: add DT bindings for UniPhier SPI controller
  spi: dw: document Microsemi integration
  spi: img-spfi: Set device select bits for SPFI port state
  spi: omap2-mcspi: remove several redundant variables
  spi: dw-mmio: add MSCC Ocelot support
  spi: dw: export dw_spi_set_cs
  spi: spi-fsl-espi: Log fifo counters on error
  spi: imx: Use the longuest possible burst size when in dynamic_burst
  spi: imx: remove unnecessary check in spi_imx_can_dma
  spi: imx: Use correct number of bytes per words
  spi: imx: Use dynamic bursts only when bits_per_word is 8, 16 or 32
  ...

The introduction of generic_max_swapfile_size and arch-specific versions has
broken linking on x86 with CONFIG_SWAP=n due to undefined reference to
'generic_max_swapfile_size'. Fix it by compiling the x86-specific
max_swapfile_size() only with CONFIG_SWAP=y.
Reported-by: Tomas Pruzina <pruzinat@gmail.com>
Fixes: 377eeaa8 ("x86/speculation/l1tf: Limit swap file size to MAX_PA/2")
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull regmap updates from Mark Brown:
 "Several small new features for regmap this time around:

   - Support for SCCB, an I2C variant used on some media cards. This has
     also pulled in an I2C commit from Peter Rosin as a dependency.

   - Addition of an API for reading repeatedly from registers where the
     address doesn't automatically increment like some ADC outputs or
     GPIO status registers.

   - Support for bulk I/O on Slimbus"

* tag 'regmap-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: Add regmap_noinc_read API
  regmap: sccb: fix typo and sort headers alphabetically
  i2c: smbus: add unlocked __i2c_smbus_xfer variant
  regmap: add SCCB support
  regmap: slimbus: add support to multi read/write

Pull configfs updates from Christoph Hellwig:

 - simplify the cide by using kvasprintf (Bart Van Assche)

 - fix a gcc 8 string truncation warning by making the code simpler
   (Guenter Roeck)

 - fix a bug in rmdir() handling (Mike Christie)

* tag 'configfs-for-4.19' of git://git.infradead.org/users/hch/configfs:
  configfs: fix registered group removal
  configfs: replace strncpy with memcpy
  configfs: use kvasprintf() instead of open-coding it

Pull dma-mapping updates from Christoph Hellwig:

 - a series from Robin to fix bus imposed dma limits by adding a
   separate mask for them to struct device instead of trying to squeeze
   a second meaning out of the existing dma mask as we did before.

   This has ACKs from the various other subsystems touched

 - a small swiotlb cleanup from Kees (acked by Konrad)

 - conversion of nios2 and sh to the new generic dma-noncoherent code.

   Various other architecture conversions will come through the
   architectures maintainers trees.

* tag 'dma-mapping-4.19' of git://git.infradead.org/users/hch/dma-mapping:
  sh: use generic dma_noncoherent_ops
  sh: split arch/sh/mm/consistent.c
  sh: use dma_direct_ops for the CONFIG_DMA_COHERENT case
  sh: introduce a sh_cacheop_vaddr helper
  sh: simplify get_arch_dma_ops
  OF: Don't set default coherent DMA mask
  ACPI/IORT: Don't set default coherent DMA mask
  iommu/dma: Respect bus DMA limit for IOVAs
  of/device: Set bus DMA mask as appropriate
  ACPI/IORT: Set bus DMA mask as appropriate
  dma-mapping: Generalise dma_32bit_limit flag
  ACPI/IORT: Support address size limit for root complexes
  of/platform: Initialise default DMA masks
  nios2: use generic dma_noncoherent_ops
  swiotlb: clean up reporting
  dma-mapping: relax warning for per-device areas

Pull MD updates from Shaohua Li:
 "A few MD fixes for 4.19-rc1:

   - several md-cluster fixes from Guoqing

   - a data corruption fix from BingJing

   - other cleanups"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md:
  md/raid5: fix data corruption of replacements after originals dropped
  drivers/md/raid5: Do not disable irq on release_inactive_stripe_list() call
  drivers/md/raid5: Use irqsave variant of atomic_dec_and_lock()
  md/r5cache: remove redundant pointer bio
  md-cluster: don't send msg if array is closing
  md-cluster: show array's status more accurate
  md-cluster: clear another node's suspend_area after the copy is finished

Pull mtd updates from Boris Brezillon:
 "JFFS2 changes:
   - Support 64-bit timestamps

  MTD core changes:
   - Support sub-partitions
   - Clarify mtd_oob_ops documentation
   - Make Kconfig formatting consistent
   - Fix potential overflows in mtdchar_{write,read}()
   - Fallback to ->_{read,write}() when ->_{read,write}_oob() is missing
     and no OOB data were requested
   - Remove VLA usage in the bch lib

  MTD driver changes:
   - Use mtd_device_register() instead of mtd_device_parse_register()
     where applicable
   - Use proper printk format to print physical addresses in the
     solutionengine driver
   - Add missing mtd_set_of_node() call in the powernv driver
   - Remove unneeded variables in a few drivers
   - Plug the TRX part parser to the DT partition parsers logic
   - Check ioremap_cache() return code in the gpio-addr-flash driver
   - Stop using VMLINUX_SYMBOL_STR() in gen_probe.c

  SPI NOR core changes:
   - Apply reset hacks only when reset is explicitly marked as broken in
     the DT

   SPI NOR driver changes:
   - Minor cleanup/fixes in the m25p80 driver
   - Release flash_np in the nxp-spifi driver
   - Add suspend/resume hooks to the atmel-quadspi driver
   - Include gpio/consumer.h instead of gpio.h in the atmel-quadspi
     driver
   - Use %pK instead of %p in the stm32-quadspi driver
   - Improve timeout handling in the cadence-quadspi driver
   - Use mtd_device_register() instead of mtd_device_parse_register() in
     the intel-spi driver

  NAND core changes:
   - Add the SPI-NAND framework.
   - Create a helper to find the best ECC configuration.
   - Create NAND controller operations.
   - Allocate dynamically ONFI parameters structure.
   - Add defines for ONFI version bits.
   - Add manufacturer fixup for ONFI parameter page.
   - Add an option to specify NAND chip as a boot device.
   - Add Reed-Solomon error correction algorithm.
   - Better name for the controller structure.
   - Remove unused caller_is_module() definition.
   - Make subop helpers return unsigned values.
   - Expose _notsupp() helpers for raw page accessors.
   - Add default values for dynamic timings.
   - Kill the chip->scan_bbt() hook.
   - Rename nand_default_bbt() into nand_create_bbt().
   - Start to clean the nand_chip structure.
   - Remove stale prototype from rawnand.h.

  Raw NAND controllers drivers changes:
   - Qcom: structuring cleanup.
   - Denali: use core helper to find the best ECC configuration.
   - Possible build of almost all drivers by adding a dependency on
     COMPILE_TEST for almost all of them in Kconfig, implies various
     fixes, Kconfig cleanup, GPIO headers inclusion cleanup, and even
     changes in sparc64 and ia64 architectures.
   - Clean the ->probe() functions error path of a lot of drivers.
   - Migrate all drivers to use nand_scan() instead of
     nand_scan_ident()/nand_scan_tail() pair.
   - Use mtd_device_register() where applicable to simplify the code.
   - Marvell:
      * Handle on-die ECC.
      * Better clocks handling.
      * Remove bogus comment.
      * Add suspend and resume support.
   - Tegra: add NAND controller driver.
   - Atmel:
      * Add module param to avoid using dma.
      * Drop Wenyou Yang from MAINTAINERS.
   - Denali: optimize timings handling.
   - FSMC: Stop using chip->read_buf().
   - FSL:
      * Switch to SPDX license tag identifiers.
      * Fix qualifiers in MXC init functions.

  Raw NAND chip drivers changes:
   - Micron:
      * Add fixup for ONFI revision.
      * Update ecc_stats.corrected.
      * Make ECC activation stateful.
      * Avoid enabling/disabling ECC when it can't be disabled.
      * Get the actual number of bitflips.
      * Allow forced on-die ECC.
      * Support 8/512 on-die ECC.
      * Fix on-die ECC detection logic.
   - Hynix:
      * Fix decoding the OOB size on H27UCG8T2BTR.
      * Use ->exec_op() in hynix_nand_reg_write_op()"

* tag 'mtd/for-4.19' of git://git.infradead.org/linux-mtd: (188 commits)
  mtd: rawnand: atmel: Select GENERIC_ALLOCATOR
  MAINTAINERS: drop Wenyou Yang from Atmel NAND driver support
  mtd: rawnand: allocate dynamically ONFI parameters during detection
  mtd: spi-nor: only apply reset hacks to broken hardware
  mtd: spi-nor: cadence-quadspi: fix timeout handling
  mtd: spi-nor: atmel-quadspi: Include gpio/consumer.h instead of gpio.h
  mtd: spi-nor: intel-spi: use mtd_device_register()
  mtd: spi-nor: stm32-quadspi: replace "%p" with "%pK"
  mtd: spi-nor: atmel-quadspi: add suspend/resume hooks
  mtd: rawnand: allocate model parameter dynamically
  mtd: rawnand: do not export nand_scan_[ident|tail]() anymore
  mtd: rawnand: txx9ndfmc: convert driver to nand_scan()
  mtd: rawnand: txx9ndfmc: clarify ECC parameters assignation
  mtd: rawnand: tegra: convert driver to nand_scan()
  mtd: rawnand: jz4740: convert driver to nand_scan()
  mtd: rawnand: jz4740: group nand_scan_{ident, tail} calls
  mtd: rawnand: jz4740: fix probe function error path
  mtd: rawnand: docg4: convert driver to nand_scan()
  mtd: rawnand: do not execute nand_scan_ident() if maxchips is zero
  mtd: rawnand: atmel: convert driver to nand_scan()
  ...

Nobody commented on this patch back in July. So now it gets merged.

* SCSI_IOCTL_SEND_COMMAND cleanup:
  scsi sg: remove incorrect scsi command checking logic

Pull block updates from Jens Axboe:
 "First pull request for this merge window, there will also be a
  followup request with some stragglers.

  This pull request contains:

   - Fix for a thundering heard issue in the wbt block code (Anchal
     Agarwal)

   - A few NVMe pull requests:
      * Improved tracepoints (Keith)
      * Larger inline data support for RDMA (Steve Wise)
      * RDMA setup/teardown fixes (Sagi)
      * Effects log suppor for NVMe target (Chaitanya Kulkarni)
      * Buffered IO suppor for NVMe target (Chaitanya Kulkarni)
      * TP4004 (ANA) support (Christoph)
      * Various NVMe fixes

   - Block io-latency controller support. Much needed support for
     properly containing block devices. (Josef)

   - Series improving how we handle sense information on the stack
     (Kees)

   - Lightnvm fixes and updates/improvements (Mathias/Javier et al)

   - Zoned device support for null_blk (Matias)

   - AIX partition fixes (Mauricio Faria de Oliveira)

   - DIF checksum code made generic (Max Gurtovoy)

   - Add support for discard in iostats (Michael Callahan / Tejun)

   - Set of updates for BFQ (Paolo)

   - Removal of async write support for bsg (Christoph)

   - Bio page dirtying and clone fixups (Christoph)

   - Set of bcache fix/changes (via Coly)

   - Series improving blk-mq queue setup/teardown speed (Ming)

   - Series improving merging performance on blk-mq (Ming)

   - Lots of other fixes and cleanups from a slew of folks"

* tag 'for-4.19/block-20180812' of git://git.kernel.dk/linux-block: (190 commits)
  blkcg: Make blkg_root_lookup() work for queues in bypass mode
  bcache: fix error setting writeback_rate through sysfs interface
  null_blk: add lock drop/acquire annotation
  Blk-throttle: reduce tail io latency when iops limit is enforced
  block: paride: pd: mark expected switch fall-throughs
  block: Ensure that a request queue is dissociated from the cgroup controller
  block: Introduce blk_exit_queue()
  blkcg: Introduce blkg_root_lookup()
  block: Remove two superfluous #include directives
  blk-mq: count the hctx as active before allocating tag
  block: bvec_nr_vecs() returns value for wrong slab
  bcache: trivial - remove tailing backslash in macro BTREE_FLAG
  bcache: make the pr_err statement used for ENOENT only in sysfs_attatch section
  bcache: set max writeback rate when I/O request is idle
  bcache: add code comments for bset.c
  bcache: fix mistaken comments in request.c
  bcache: fix mistaken code comments in bcache.h
  bcache: add a comment in super.c
  bcache: avoid unncessary cache prefetch bch_btree_node_get()
  bcache: display rate debug parameters to 0 when writeback is not running
  ...

Merge L1 Terminal Fault fixes from Thomas Gleixner:
 "L1TF, aka L1 Terminal Fault, is yet another speculative hardware
  engineering trainwreck. It's a hardware vulnerability which allows
  unprivileged speculative access to data which is available in the
  Level 1 Data Cache when the page table entry controlling the virtual
  address, which is used for the access, has the Present bit cleared or
  other reserved bits set.

  If an instruction accesses a virtual address for which the relevant
  page table entry (PTE) has the Present bit cleared or other reserved
  bits set, then speculative execution ignores the invalid PTE and loads
  the referenced data if it is present in the Level 1 Data Cache, as if
  the page referenced by the address bits in the PTE was still present
  and accessible.

  While this is a purely speculative mechanism and the instruction will
  raise a page fault when it is retired eventually, the pure act of
  loading the data and making it available to other speculative
  instructions opens up the opportunity for side channel attacks to
  unprivileged malicious code, similar to the Meltdown attack.

  While Meltdown breaks the user space to kernel space protection, L1TF
  allows to attack any physical memory address in the system and the
  attack works across all protection domains. It allows an attack of SGX
  and also works from inside virtual machines because the speculation
  bypasses the extended page table (EPT) protection mechanism.

  The assoicated CVEs are: CVE-2018-3615, CVE-2018-3620, CVE-2018-3646

  The mitigations provided by this pull request include:

   - Host side protection by inverting the upper address bits of a non
     present page table entry so the entry points to uncacheable memory.

   - Hypervisor protection by flushing L1 Data Cache on VMENTER.

   - SMT (HyperThreading) control knobs, which allow to 'turn off' SMT
     by offlining the sibling CPU threads. The knobs are available on
     the kernel command line and at runtime via sysfs

   - Control knobs for the hypervisor mitigation, related to L1D flush
     and SMT control. The knobs are available on the kernel command line
     and at runtime via sysfs

   - Extensive documentation about L1TF including various degrees of
     mitigations.

  Thanks to all people who have contributed to this in various ways -
  patches, review, testing, backporting - and the fruitful, sometimes
  heated, but at the end constructive discussions.

  There is work in progress to provide other forms of mitigations, which
  might be less horrible performance wise for a particular kind of
  workloads, but this is not yet ready for consumption due to their
  complexity and limitations"

* 'l1tf-final' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (75 commits)
  x86/microcode: Allow late microcode loading with SMT disabled
  tools headers: Synchronise x86 cpufeatures.h for L1TF additions
  x86/mm/kmmio: Make the tracer robust against L1TF
  x86/mm/pat: Make set_memory_np() L1TF safe
  x86/speculation/l1tf: Make pmd/pud_mknotpresent() invert
  x86/speculation/l1tf: Invert all not present mappings
  cpu/hotplug: Fix SMT supported evaluation
  KVM: VMX: Tell the nested hypervisor to skip L1D flush on vmentry
  x86/speculation: Use ARCH_CAPABILITIES to skip L1D flush on vmentry
  x86/speculation: Simplify sysfs report of VMX L1TF vulnerability
  Documentation/l1tf: Remove Yonah processors from not vulnerable list
  x86/KVM/VMX: Don't set l1tf_flush_l1d from vmx_handle_external_intr()
  x86/irq: Let interrupt handlers set kvm_cpu_l1tf_flush_l1d
  x86: Don't include linux/irq.h from asm/hardirq.h
  x86/KVM/VMX: Introduce per-host-cpu analogue of l1tf_flush_l1d
  x86/irq: Demote irq_cpustat_t::__softirq_pending to u16
  x86/KVM/VMX: Move the l1tf_flush_l1d test to vmx_l1d_flush()
  x86/KVM/VMX: Replace 'vmx_l1d_flush_always' with 'vmx_l1d_flush_cond'
  x86/KVM/VMX: Don't set l1tf_flush_l1d to true from vmx_l1d_flush()
  cpu/hotplug: detect SMT disabled by BIOS
  ...

Pull xfs updates from Darrick Wong:
 "This is the second part of the XFS changes for 4.19.

  The biggest changes are the removal of buffer heads frm XFS, a massive
  reworking of the deferred transaction operations handling code, the
  removal of the long defunct barrier/nobarrier mount options, and the
  addition of a few more online repair functions.

  Summary:

   - Use extent maps to track pagecache page status instead of
     bufferhead state.

   - Refactor pagecache read and write paths to use the new iomap
     library functions, which enable us to drop the old bufferhead code
     for pagesize == blocksize filesystems.

   - Set up parallel per-block-per-page metadata to track subpage
     information that was tracked by buffer heads, which enables us to
     drop the old bufferhead code for pagesize > blocksize filesystems.

   - Tie a deferred ops control structure to a transaction so that we
     can take advantage of an upper-level dfops without having to plumb
     pointer passing through the code.

   - Refactor the deferred ops code to track deferred ops as part of the
     transaction structure (instead of as a separate data structure) so
     that we can simplify the scoping rules around defer_ops.

   - Refactor twisty delwri buffer submission code to avoid deadlocks.

   - Shorten and fix indenting problems in the scrub code.

   - Detect obviously bad summary counts at mount and fix them.

   - Directly associate deferred ops control structure with a
     transaction so that callers no longer have to manage it themselves.

   - Remove a couple of IRIX-era inode macros.

   - Remove the long-deprecated 'barrier' and 'nobarrier' mount options.

   - Clean up the inode fork structure a bit.

   - Check for bad fs summary counter values in the superblock.

   - Reduce COW fork lookups during writeback.

   - Refactor the deferred ops control structures into the transaction
     structure, thereby eliminating the need for transaction users to
     handle the deferred ops as a separate data structure.

   - Add the ability to repair AG headers online.

   - Fix a crash due to insufficient return value checking.

   - Various fixes and cleanups"

* tag 'xfs-4.19-merge-6' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (155 commits)
  xfs: fix a null pointer dereference in xfs_bmap_extents_to_btree
  xfs: remove b_last_holder & associated macros
  iomap: Switch to offset_in_page for clarity
  xfs: Close race between direct IO and xfs_break_layouts()
  xfs: repair the AGI
  xfs: repair the AGFL
  xfs: repair the AGF
  xfs: remove dead error handling code in xfs_dquot_disk_alloc()
  xfs: use WRITE_ONCE to update if_seq
  xfs: fix a comment in xfs_log_reserve
  xfs: only validate summary counts on primary superblock
  xfs: substitute spaces with tabs
  xfs: fold dfops into the transaction
  xfs: always defer agfl block frees
  xfs: pass transaction to xfs_defer_add()
  xfs: replace xfs_defer_ops ->dop_pending with on-stack list
  xfs: cancel dfops on xfs_defer_finish() error
  xfs: clean out superfluous dfops dop params/vars
  xfs: drop dop param from xfs_defer_op_type ->finish_item() callback
  xfs: automatic dfops inode relogging
  ...

Merge updates of the ACPI battery and button drivers and support for
a new OEM _OSI string for 4.19.

* acpi-button:
  ACPI / button: fix defined but not used warning
  ACPI / button: increment wakeup count only when notified

* acpi-battery:
  ACPI / battery: Do not export energy_full[_design] on devices without full_charge_capacity
  ACPI / battery: get rid of negations in conditions
  ACPI / battery: use specialized print macros
  ACPI / battery: reorder headers alphabetically
  ACPI / battery: drop inclusion of init.h
  ACPI: battery: remove redundant old_present check on insertion

* acpi-osi:
  ACPI / OSI: Add OEM _OSI string to enable NVidia HDMI audio

Merge ACPI x86-specific changes, core updates, EC driver updates and
APEI support updates for 4.19.

These add a special platform driver for handling multiple I2C devices
hooked up to the same device object in the ACPI tables, add some new
quirks and remove one that is not needed any more.

* acpi-x86:
  platform/x86: Add ACPI i2c-multi-instantiate pseudo driver
  ACPI / x86: utils: Remove status workaround from acpi_device_always_present()
  ACPI / x86: enable touchscreen on Dell Venue Pro 7139

* acpi-bus:
  ACPI: bus: Fix a pointer coding style issue
  Revert "ACPI / bus: Parse tables as term_list for Dell XPS 9570 and Precision M5530"

* acpi-ec:
  ACPI / EC: Add another entry for Thinkpad X1 Carbon 6th
  ACPI / EC: Use ec_no_wakeup on ThinkPad X1 Yoga 3rd

* acpi-apei:
  arm64 / ACPI: clean the additional checks before calling ghes_notify_sea()

Merge ACPICA changes and updates of the ACPI device properties
framework for 4.19.

These revert two ACPICA commits that are not needed any more and
modify the properties graph support in ACPI to be more in-line with
the analogous DT code.

* acpica:
  ACPICA: Update version to 20180629
  ACPICA: Revert "iASL compiler: allow compilation of externals with paths that refer to existing names"
  ACPICA: Revert "iASL: change processing of external op namespace nodes for correctness"

* acpi-property:
  ACPI: property: graph: Update graph documentation to use generic references
  ACPI: property: graph: Improve graph documentation for port/ep numbering
  ACPI: property: graph: Fix graph documentation
  ACPI: property: Update documentation for hierarchical data extension 1.1
  ACPI: property: Document key numbering for hierarchical data extension refs
  ACPI: property: Use data node name and reg property for graphs
  ACPI: property: Allow direct graph endpoint references
  ACPI: property: Make the ACPI graph API private
  ACPI: property: Document hierarchical data extension references
  ACPI: property: Allow making references to non-device nodes
  ACPI: Convert ACPI reference args to generic fwnode reference args

Merge cpufreq changes for 4.19.

These are driver extensions, some driver and core fixes and a new
tracepoint for the tracking of frequency limits changes (coming from
Android).

* pm-cpufreq:
  cpufreq: intel_pstate: Ignore turbo active ratio in HWP
  cpufreq: Fix a circular lock dependency problem
  cpu/hotplug: Add a cpus_read_trylock() function
  cpufreq: trace frequency limits change
  cpufreq: intel_pstate: Show different max frequency with turbo 3 and HWP
  cpufreq: pcc-cpufreq: Disable dynamic scaling on many-CPU systems
  cpufreq: qcom-kryo: Silently error out on EPROBE_DEFER
  cpufreq / CPPC: Add cpuinfo_cur_freq support for CPPC
  cpufreq: armada-37xx: Add AVS support
  dt-bindings: marvell: Add documentation for the Armada 3700 AVS binding
  cpufreq: imx6q/thermal: imx: register cooling device depending on OF
  cpufreq: intel_pstate: use match_string() helper

Merge devfreq changes and a new CPU idle time injection framework
for 4.19.

* powercap:
  powercap / idle_inject: Add an idle injection framework

* pm-devfreq:
  PM / devfreq: rk3399_dmc: Fix duplicated opp table on reload.
  PM / devfreq: Init user limits from OPP limits, not viceversa
  PM / devfreq: rk3399_dmc: fix spelling mistakes.
  PM / devfreq: rk3399_dmc: do not print error when get supply and clk defer.
  dt-bindings: devfreq: rk3399_dmc: move interrupts to be optional.
  PM / devfreq: rk3399_dmc: remove wait for dcf irq event.
  dt-bindings: clock: add rk3399 DDR3 standard speed bins.
  dt-bindings: devfreq: rk3399_dmc: improve binding documentation.
  PM / devfreq: use put_device() instead of kfree()
  PM / devfreq: exynos-ppmu: Delete an error message for a failed memory allocation in exynos_ppmu_probe()

Merge changes in the PM core, system-wide PM infrastructure, generic
power domains (genpd) framework, ACPI PM infrastructure and cpuidle
for 4.19.

* pm-core:
  driver core: Add flag to autoremove device link on supplier unbind
  driver core: Rename flag AUTOREMOVE to AUTOREMOVE_CONSUMER

* pm-domains:
  PM / Domains: Introduce dev_pm_domain_attach_by_name()
  PM / Domains: Introduce option to attach a device by name to genpd
  PM / Domains: dt: Add a power-domain-names property

* pm-sleep:
  PM / reboot: Eliminate race between reboot and suspend
  PM / hibernate: Mark expected switch fall-through
  x86/power/hibernate_64: Remove VLA usage
  PM / hibernate: cast PAGE_SIZE to int when comparing with error code

* acpi-pm:
  ACPI / PM: save NVS memory for ASUS 1025C laptop
  ACPI / PM: Default to s2idle in all machines supporting LP S0

* pm-cpuidle:
  ARM: cpuidle: silence error on driver registration failure

Pull ext4 updates from Ted Ts'o:

 - Convert content from the ext4 wiki to Documentation rst files so it
   is more likely to be updated as we add new features to ext4.

 - Add 64-bit timestamp support to ext4's superblock fields.

 - ... and the usual bug fixes and cleanups, including a Spectre gadget
   fixup and some hardening against maliciously corrupted file systems.

* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (34 commits)
  ext4: remove unneeded variable "err" in ext4_mb_release_inode_pa()
  ext4: improve code readability in ext4_iget()
  ext4: fix spectre gadget in ext4_mb_regular_allocator()
  ext4: check for NUL characters in extended attribute's name
  ext4: use ext4_warning() for sb_getblk failure
  ext4: fix race when setting the bitmap corrupted flag
  ext4: reset error code in ext4_find_entry in fallback
  ext4: handle layout changes to pinned DAX mappings
  dax: dax_layout_busy_page() warn on !exceptional
  docs: fix up the obviously obsolete bits in the new ext4 documentation
  docs: add new ext4 superblock time extension fields
  docs: create filesystem internal section
  ext4: use swap macro in mext_page_double_lock
  ext4: check allocation failure when duplicating "data" in ext4_remount()
  ext4: fix warning message in ext4_enable_quotas()
  ext4: super: extend timestamps to 40 bits
  jbd2: replace current_kernel_time64 with ktime equivalent
  ext4: use timespec64 for all inode times
  ext4: use ktime_get_real_seconds for i_dtime
  ext4: use 64-bit timestamps for mmp_time
  ...

Pull cifs updates from Steve French:
 "smb3/cifs fixes (including 8 for stable).

  Other improvements include:

   - improved tracing, improved stats

   - snapshots (previous version mounts work now over SMB3)

   - performance (compounding enabled for statfs, ~40% faster).

   - security (make it possible to build cifs.ko with insecure vers=1.0
     disabled in Kconfig)"

* tag '4.19-smb3' of git://git.samba.org/sfrench/cifs-2.6: (43 commits)
  smb3: create smb3 equivalent alias for cifs pseudo-xattrs
  smb3: allow previous versions to be mounted with snapshot= mount parm
  cifs: don't show domain= in mount output when domain is empty
  cifs: add missing support for ACLs in SMB 3.11
  smb3: enumerating snapshots was leaving part of the data off end
  cifs: update smb2_queryfs() to use compounding
  cifs: update receive_encrypted_standard to handle compounded responses
  cifs: create SMB2_open_init()/SMB2_open_free() helpers.
  cifs: add SMB2_query_info_[init|free]()
  cifs: add SMB2_close_init()/SMB2_close_free()
  smb3: display stats counters for number of slow commands
  CIFS: fix uninitialized ptr deref in smb2 signing
  smb3: Do not send SMB3 SET_INFO if nothing changed
  smb3: fix minor debug output for CONFIG_CIFS_STATS
  smb3: add tracepoint for slow responses
  cifs: add compound_send_recv()
  cifs: make smb_send_rqst take an array of requests
  cifs: update init_sg, crypt_message to take an array of rqst
  smb3: update readme to correct information about /proc/fs/cifs/Stats
  smb3: fix reset of bytes read and written stats
  ...

Pull fs iomap refactoring from Darrick Wong:
 "This is the first part of the XFS changes for 4.19.

  Christoph and Andreas coordinated some refactoring work on the iomap
  code in preparation for removing buffer heads from XFS and porting
  gfs2 to iomap. I'm sending this small pull request ahead of the main
  XFS merge to avoid holding up gfs2 unnecessarily"

* 'iomap-4.19-merge' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  iomap: add inline data support to iomap_readpage_actor
  iomap: support direct I/O to inline data
  iomap: refactor iomap_dio_actor
  iomap: add initial support for writes without buffer heads
  iomap: add an iomap-based readpage and readpages implementation
  iomap: add private pointer to struct iomap
  iomap: add a page_done callback
  iomap: generic inline data handling
  iomap: complete partial direct I/O writes synchronously
  iomap: mark newly allocated buffer heads as new
  fs: factor out a __generic_write_end helper

Pull btrfs updates from David Sterba:
 "Mostly fixes and cleanups, nothing big, though the notable thing is
  the inserted/deleted lines delta -1124.

  User visible changes:
   - allow defrag on opened read-only files that have rw permissions;
     similar to what dedupe will allow on such files

  Core changes:
   - tree checker improvements, reported by fuzzing:
      * more checks for: block group items, essential trees
      * chunk type validation
      * mount time cross-checks that physical and logical chunks match
      * switch more error codes to EUCLEAN aka EFSCORRUPTED

  Fixes:
   - fsync corner case fixes

   - fix send failure when root has deleted files still open

   - send, fix incorrect file layout after hole punching beyond eof

   - fix races between mount and deice scan ioctl, found by fuzzing

   - fix deadlock when delayed iput is called from writeback on the same
     inode; rare but has been observed in practice, also removes code

   - fix pinned byte accounting, using the right percpu helpers; this
     should avoid some write IO inefficiency during low space conditions

   - don't remove block group that still has pinned bytes

   - reset on-disk device stats value after replace, otherwise this
     would report stale values for the new device

  Cleanups:
   - time64_t/timespec64 cleanups

   - remove remaining dead code in scrub handling NOCOW extents after
     disabling it in previous cycle

   - simplify fsync regarding ordered extents logic and remove all the
     related code

   - remove redundant arguments in order to reduce stack space
     consumption

   - remove support for V0 type of extents, not in use since 2.6.30

   - remove several unused structure members

   - fewer indirect function calls by inlining some callbacks

   - qgroup rescan timing fixes

   - vfs: iget cleanups"

* tag 'for-4.19-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (182 commits)
  btrfs: revert fs_devices state on error of btrfs_init_new_device
  btrfs: Exit gracefully when chunk map cannot be inserted to the tree
  btrfs: Introduce mount time chunk <-> dev extent mapping check
  btrfs: Verify that every chunk has corresponding block group at mount time
  btrfs: Check that each block group has corresponding chunk at mount time
  Btrfs: send, fix incorrect file layout after hole punching beyond eof
  btrfs: Use wrapper macro for rcu string to remove duplicate code
  btrfs: simplify btrfs_iget
  btrfs: lift make_bad_inode into btrfs_iget
  btrfs: simplify IS_ERR/PTR_ERR checks
  btrfs: btrfs_iget never returns an is_bad_inode inode
  btrfs: replace: Reset on-disk dev stats value after replace
  btrfs: extent-tree: Remove unused __btrfs_free_block_rsv
  btrfs: backref: Use ERR_CAST to return error code
  btrfs: Remove redundant btrfs_release_path from btrfs_unlink_subvol
  btrfs: Remove root parameter from btrfs_unlink_subvol
  btrfs: Remove fs_info from btrfs_add_root_ref
  btrfs: Remove fs_info from btrfs_del_root_ref
  btrfs: Remove fs_info from btrfs_del_root
  btrfs: Remove fs_info from btrfs_delete_delayed_dir_index
  ...

Pull file locking updates from Jeff Layton:
 "Just a couple of patches from Konstantin to fix /proc/locks when the
  process that set the lock has exited, and a new tracepoint for the
  flock() codepath. Also threw in mailmap entries for my addresses and a
  comment cleanup"

* tag 'locks-v4.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux:
  locks: remove misleading obsolete comment
  mailmap: remap some of my email addresses to kernel.org address
  locks: add tracepoint in flock codepath
  fs/lock: show locks taken by processes from another pidns
  fs/lock: skip lock owner pid translation in case we are in init_pid_ns