- 12 Jun, 2023 1 commit
-
-
Alan Previn authored
Ensure intel_gsc_uc_fw_init_done and intel_gsc_uc_fw_proxy_init takes a wakeref before reading GSC Shim registers. NOTE: another patch in review also adds a call from selftest to this same function. (https://patchwork.freedesktop.org/series/117713/) which is why i am adding the wakeref inside the callee, not the caller. v2: - add a helper, 'gsc_uc_get_fw_status' for both callers (Daniele Ceraolo) Fixes: 99afb7cc ("drm/i915/pxp: Add ARB session creation and cleanup") Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230608230716.3079594-1-alan.previn.teres.alexis@intel.com
-
- 10 Jun, 2023 1 commit
-
-
Nirmoy Das authored
Ensure correct handling of closed VMAs on multi-gt platforms to prevent Use-After-Free. Currently, when GT0 goes idle, closed VMAs that are exclusively added to GT0's closed_vma link (gt->closed_vma) and subsequently freed by i915_vma_parked(), which assumes the entire GPU is idle. However, on platforms with multiple GTs, such as MTL, GT1 may remain active while GT0 is idle. This causes GT0 to mistakenly consider the closed VMAs in its closed_vma list as unnecessary, potentially leading to Use-After-Free issues if a job for GT1 attempts to access a freed VMA. Although we do take a wakeref for GT0 but it happens later, after evaluating VMAs. To mitigate this, it is necessary to hold a GT0 wakeref early. v2: Use gt id to detect multi-tile(Andi) Fix the incorrect error path. v3: Add more comment(Andi) Use the new gt var when possible(Andrzej) Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Chris Wilson <chris.p.wilson@intel.com> Cc: Andi Shyti <andi.shyti@linux.intel.com> Cc: Andrzej Hajda <andrzej.hajda@intel.com> Cc: Sushma Venkatesh Reddy <sushma.venkatesh.reddy@intel.com> Signed-off-by: Nirmoy Das <nirmoy.das@intel.com> Tested-by: Andi Shyti <andi.shyti@linux.intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Tested-by: Sushma Venkatesh Reddy <sushma.venkatesh.reddy@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230608110103.777594-1-andi.shyti@linux.intel.com
-
- 08 Jun, 2023 1 commit
-
-
Dan Carpenter authored
This should return negative -EAGAIN instead of positive EAGAIN. Fixes: e5e1e6d2 ("drm/i915/pxp: Add MTL helpers to submit Heci-Cmd-Packet to GSC") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/ZH7sr+Vs4zOQoouU@moroto
-
- 07 Jun, 2023 3 commits
-
-
Umesh Nerlige Ramappa authored
ggtt offset for hw_tail is not required for the calculations, so drop it. Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230605193923.1836048-3-umesh.nerlige.ramappa@intel.com
-
Umesh Nerlige Ramappa authored
On DG2, capturing OA reports while running heavy render workloads sometimes results in invalid OA reports where 64-byte chunks inside reports have stale values. Under memory pressure, high OA sampling rates (13.3 us) and heavy render workload, occasionally, the OA HW TAIL pointer does not progress as fast as the sampling rate. When these glitches occur, the TAIL pointer takes approx. 200us to progress. While this is expected behavior from the HW perspective, invalid reports are not expected. In oa_buffer_check_unlocked(), when we execute the if condition, we are updating the oa_buffer.tail to the aging tail and then setting pollin based on this tail value, however, we do not have a chance to rewind and validate the reports prior to setting pollin. The validation happens in a subsequent call to oa_buffer_check_unlocked(). If a read occurs before this validation, then we end up reading reports up until this oa_buffer.tail value which includes invalid reports. Though found on DG2, this affects all platforms. The aging tail logic is no longer necessary since we are explicitly checking for landed reports. Start by dropping the aging tail logic. v2: - Drop extra blank line - Add reason to drop aging logic (Ashutosh) - Add bug links (Ashutosh) - rename aged_tail to read_tail - Squash patches 3 and 1 v3: (Ashutosh) - Remove extra spaces - Remove gtt_offset from the pollin calculation - s/Bug:/Link/ in commit message (checkpatch) Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/7484 Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/7757Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230605193923.1836048-2-umesh.nerlige.ramappa@intel.com
-
Fei Yang authored
To comply with the design that buffer objects shall have immutable cache setting through out their life cycle, {set, get}_caching ioctl's are no longer supported from MTL onward. With that change caching policy can only be set at object creation time. The current code applies a default (platform dependent) cache setting for all objects. However this is not optimal for performance tuning. The patch extends the existing gem_create uAPI to let user set PAT index for the object at creation time. The new extension is platform independent, so UMD's can switch to using this extension for older platforms as well, while {set, get}_caching are still supported on these legacy paltforms for compatibility reason. However, since PAT index was not clearly defined for platforms prior to GEN12 (TGL), so we are limiting this externsion to GEN12+ platforms only. See ext_set_pat() in for the implementation details. The documentation related to the PAT/MOCS tables is currently available for Tiger Lake here: https://www.intel.com/content/www/us/en/docs/graphics-for-linux/developer-reference/1-0/tiger-lake.html The documentation for other platforms is currently being updated. BSpec: 45101 Mesa support has been submitted in this merge request: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/22878 The media driver supprt has bin submitted in this merge request: https://github.com/intel/media-driver/pull/1680 The IGT test related to this change is igt@gem_create@create-ext-set-pat Signed-off-by: Fei Yang <fei.yang@intel.com> Cc: Chris Wilson <chris.p.wilson@linux.intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Andi Shyti <andi.shyti@linux.intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Acked-by: Jordan Justen <jordan.l.justen@intel.com> Tested-by: Jordan Justen <jordan.l.justen@intel.com> Acked-by: Carl Zhang <carl.zhang@intel.com> Tested-by: Lihao Gu <lihao.gu@intel.com> Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Acked-by: Slawomir Milczarek <slawomir.milczarek@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230606100042.482345-2-andi.shyti@linux.intel.com
-
- 06 Jun, 2023 5 commits
-
-
John Harrison authored
There were a bunch of defines and structures left over from an API update a very long time ago. Remove them. Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230531155942.441862-1-John.C.Harrison@Intel.com
-
Matt Atwood authored
_GTS as an abbreviation here leads to some confusion, match other definitions and drop the s. Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Ashutosh Dixit <ashutosh.dixit@linux.intel.com> Cc: Andi Shyti <andy.shyti@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230602231754.1596433-3-matthew.s.atwood@intel.com
-
Matt Atwood authored
According to Ashutosh there is no current or planned product in i915 for I915_MAX_GT to be 4 anymore. Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Ashutosh Dixit <ashutosh.dixit@linux.intel.com> Cc: Andi Shyti <andy.shyti@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230602231754.1596433-2-matthew.s.atwood@intel.com
-
Tvrtko Ursulin authored
Add some missing error propagation in live_parallel_switch. To avoid needlessly burdening the various backport processes, note I am not marking it as a fix against any patches and not copying stable since it is debug/selftests only code. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Cc: Andi Shyti <andi.shyti@linux.intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Fixes: 50d16d44 ("drm/i915/selftests: Exercise context switching in parallel") Fixes: 6407cf53 ("drm/i915/selftests: Stop using kthread_stop()") Link: https://patchwork.freedesktop.org/patch/msgid/20230605131135.396854-1-tvrtko.ursulin@linux.intel.com
-
Tvrtko Ursulin authored
Use the common fdinfo helper for printing the basics. Remove now unused client id allocation code. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Rob Clark <robdclark@chromium.org> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230605123224.373633-1-tvrtko.ursulin@linux.intel.com
-
- 05 Jun, 2023 9 commits
-
-
Daniele Ceraolo Spurio authored
Follow the same logic as DG2, so just a meu binary with no version number. Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Alan Previn <alan.previn.teres.alexis@intel.com> Reviewed-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230531235415.1467475-8-daniele.ceraolospurio@intel.com
-
Daniele Ceraolo Spurio authored
On MTL, for obvious reasons, HuC is only available on the media tile. We already disable SW support for HuC on the root gt due to the absence of VCS engines, but we also need to update the getparam to point to the HuC struct in the media GT. Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: John Harrison <John.C.Harrison@Intel.com> Reviewed-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230531235415.1467475-7-daniele.ceraolospurio@intel.com
-
Daniele Ceraolo Spurio authored
The full authentication via the GSC requires an heci packet submission to the GSC FW via the GSC CS. The GSC has new PXP command for this (literally called NEW_HUC_AUTH). The intel_huc_auth function is also updated to handle both authentication types. v2: check that the GuC auth for clear media has completed before proceding with the full auth v3: use a define for the object size (Alan) Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Alan Previn <alan.previn.teres.alexis@intel.com> Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230531235415.1467475-6-daniele.ceraolospurio@intel.com
-
Daniele Ceraolo Spurio authored
Before we add the second step of the MTL HuC auth (via GSC), we need to have the ability to differentiate between them. To do so, the huc authentication check is duplicated for GuC and GSC auth, with GSC-enabled binaries being considered fully authenticated only after the GSC auth step. To report the difference between the 2 auth steps, a new case is added to the HuC getparam. This way, the clear media driver can start submitting before full auth, as partial auth is enough for those workloads. v2: fix authentication status check for DG2 v3: add a better comment at the top of the HuC file to explain the different approaches to load and auth (John) v4: update call to intel_huc_is_authenticated in the pxp code to check for GSC authentication v5: drop references to meu and esclamation mark in huc_auth print (John) Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Alan Previn <alan.previn.teres.alexis@intel.com> Cc: John Harrison <John.C.Harrison@Intel.com> Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com> #v2 Reviewed-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230531235415.1467475-5-daniele.ceraolospurio@intel.com
-
Daniele Ceraolo Spurio authored
In the previous patch we extracted the offset of the legacy-style HuC binary located within the GSC-enabled blob, so now we can use that to load the HuC via DMA if the fuse is set that way. Note that we now need to differentiate between "GSC-enabled binary" and "loaded by GSC", so the former case has been renamed to "has GSC headers" for clarity, while the latter is now based on the fuse instead of the binary format. This way, all the legacy load paths are automatically taken (including the auth by GuC) without having to implement further code changes. v2: s/is_meu_binary/has_gsc_headers/, clearer logs (John) v3: split check for GSC access, better comments (John) Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Alan Previn <alan.previn.teres.alexis@intel.com> Cc: John Harrison <John.C.Harrison@Intel.com> Reviewed-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230531235415.1467475-4-daniele.ceraolospurio@intel.com
-
Daniele Ceraolo Spurio authored
The new binaries that support the 2-step authentication contain the legacy-style binary, which we can use for loading the HuC via DMA. To find out where this is located in the image, we need to parse the manifest of the GSC-enabled HuC binary. The manifest consist of a partition header followed by entries, one of which contains the offset we're looking for. Note that the DG2 GSC binary contains entries with the same names, but it doesn't contain a full legacy binary, so we need to skip assigning the dma offset in that case (which we can do by checking the ccs). Also, since we're now parsing the entries, we can extract the HuC version that way instead of using hardcoded offsets. Note that the GSC binary uses the same structures in its binary header, so they've been added in their own header file. v2: fix structure names to match meu defines (s/CPT/CPD/), update commit message, check ccs validity, drop old version location defines. v3: drop references to the MEU tool to reduce confusion, fix log (John) v4: fix log for real (John) Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Alan Previn <alan.previn.teres.alexis@intel.com> Cc: John Harrison <John.C.Harrison@Intel.com> Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com> #v2 Reviewed-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230531235415.1467475-3-daniele.ceraolospurio@intel.com
-
Daniele Ceraolo Spurio authored
Now that each FW has its own reserved area, we can keep them always pinned and skip the pin/unpin dance on reset. This will make things easier for the 2-step HuC authentication, which requires the FW to be pinned in GGTT after the xfer is completed. Since the vma is now valid for a long time and not just for the quick pin-load-unpin dance, the name "dummy" is no longer appropriare and has been replaced with vma_res. All the functions have also been updated to operate on vma_res for consistency. Given that we pin the vma behind the allocator's back (which is ok because we do the pinning in an area that was previously reserved for thus purpose), we do need to explicitly re-pin on resume because the automated helper won't cover us. v2: better comments and commit message, s/dummy/vma_res/ Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Alan Previn <alan.previn.teres.alexis@intel.com> Cc: John Harrison <John.C.Harrison@Intel.com> Reviewed-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230531235415.1467475-2-daniele.ceraolospurio@intel.com
-
Tvrtko Ursulin authored
For conflict avoidance we need the following commit: c9a9f18d drm/i915/huc: use const struct bus_type pointers Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
-
Tejas Upadhyay authored
For mtl, workaround suggests that, SW insert a dummy PIPE_CONTROL prior to PIPE_CONTROL which contains a post sync: Timestamp or Write Immediate. Bspec: 72197 V5: - Remove ret variable - Andi V4: - Update commit message, avoid returing cs - Andi/Matt V3: - Wrap dummy pipe control stuff in API - Andi V2: - Fix kernel test robot warnings Closes: https://lore.kernel.org/oe-kbuild-all/202305121525.3EWdGoBY-lkp@intel.com/Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230601110959.1715927-1-tejas.upadhyay@intel.com
-
- 02 Jun, 2023 5 commits
-
-
Nathan Chancellor authored
When building ARCH=i386 allmodconfig, the following warning occurs: In file included from include/linux/device.h:15, from include/linux/node.h:18, from include/linux/cpu.h:17, from include/linux/static_call.h:135, from arch/x86/include/asm/perf_event.h:5, from include/linux/perf_event.h:25, from drivers/gpu/drm/i915/i915_pmu.h:11, from drivers/gpu/drm/i915/gt/intel_engine_types.h:21, from drivers/gpu/drm/i915/gt/intel_context_types.h:18, from drivers/gpu/drm/i915/gem/i915_gem_context_types.h:20, from drivers/gpu/drm/i915/i915_request.h:34, from drivers/gpu/drm/i915/i915_active.h:13, from drivers/gpu/drm/i915/gt/intel_context.h:13, from drivers/gpu/drm/i915/pxp/intel_pxp_gsccs.c:8: drivers/gpu/drm/i915/pxp/intel_pxp_gsccs.c: In function 'gsccs_send_message': include/drm/drm_print.h:456:39: error: format '%ld' expects argument of type 'long int', but argument 4 has type 'size_t' {aka 'unsigned int'} [-Werror=format=] 456 | dev_##level##type((drm)->dev, "[drm] " fmt, ##__VA_ARGS__) | ^~~~~~~~ include/linux/dev_printk.h:110:30: note: in definition of macro 'dev_printk_index_wrap' 110 | _p_func(dev, fmt, ##__VA_ARGS__); \ | ^~~ include/linux/dev_printk.h:146:61: note: in expansion of macro 'dev_fmt' 146 | dev_printk_index_wrap(_dev_warn, KERN_WARNING, dev, dev_fmt(fmt), ##__VA_ARGS__) | ^~~~~~~ include/drm/drm_print.h:456:9: note: in expansion of macro 'dev_warn' 456 | dev_##level##type((drm)->dev, "[drm] " fmt, ##__VA_ARGS__) | ^~~~ include/drm/drm_print.h:466:9: note: in expansion of macro '__drm_printk' 466 | __drm_printk((drm), warn,, fmt, ##__VA_ARGS__) | ^~~~~~~~~~~~ drivers/gpu/drm/i915/pxp/intel_pxp_gsccs.c:146:17: note: in expansion of macro 'drm_warn' 146 | drm_warn(&i915->drm, "caller with insufficient PXP reply size %u (%ld)\n", | ^~~~~~~~ cc1: all warnings being treated as errors Use the '%zu' format specifier, as the variable is a 'size_t'. Fixes: dc9ac125 ("drm/i915/pxp: Add GSC-CS backend to send GSC fw messages") Signed-off-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230530-i915-pxp-size_t-wformat-v1-1-9631081e2e5b@kernel.org
-
Andrzej Hajda authored
In case system is short on mappable memory (256MB on SmallBar) allocation of two 1GB buffers will fail. Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8300Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230601144450.792228-1-andrzej.hajda@intel.com
-
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
drm-misc-next for v6.5: UAPI Changes: Cross-subsystem Changes: * fbdev: * Add Kconfig options and initializer macros for file I/O, convert DRM fbdev emulation Core Changes: * Unify handling of struct file_operations.show_fdinfo * Use .probe in all i2c code (interface cleanup) * TTM: * Remove unused code Driver Changes: * amdgpu: * Use shared show_fdinfo code * Fix building without procfs * bridge: * display-conenctor: Add support for external power supply * samsung-dsim: Fix enabling; Support variable clocking * tc358767: Fixes * ti-sn65dsi83: Fix enabling * msm: * Use shared show_fdinfo code * msxfb: * Add support for i.MX93 LCDIF * panel: * Add support for Ampire AM-800480L1TMQW-T00H plus DT bindings * panel-edp: Convert .remove to return void * stm: * dsi: Use devm_ helper * ltdc: Fix potential invalid pointer deref Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20230601112246.GA10882@linux-uq9g
-
Nathan Chancellor authored
When building with clang's -Wincompatible-function-pointer-types-strict, the following warnings occur: drivers/gpu/drm/i915/gt/intel_ggtt_gmch.c:102:23: error: incompatible function pointer types assigning to 'void (*)(struct i915_address_space *, dma_addr_t, u64, unsigned int, u32)' (aka 'void (*)(struct i915_address_space *, unsigned int, unsigned long long, unsigned int, unsigned int)') from 'void (struct i915_address_space *, dma_addr_t, u64, enum i915_cache_level, u32)' (aka 'void (struct i915_address_space *, unsigned int, unsigned long long, enum i915_cache_level, unsigned int)') [-Werror,-Wincompatible-function-pointer-types-strict] ggtt->vm.insert_page = gmch_ggtt_insert_page; ^ ~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/i915/gt/intel_ggtt_gmch.c:103:26: error: incompatible function pointer types assigning to 'void (*)(struct i915_address_space *, struct i915_vma_resource *, unsigned int, u32)' (aka 'void (*)(struct i915_address_space *, struct i915_vma_resource *, unsigned int, unsigned int)') from 'void (struct i915_address_space *, struct i915_vma_resource *, enum i915_cache_level, u32)' (aka 'void (struct i915_address_space *, struct i915_vma_resource *, enum i915_cache_level, unsigned int)') [-Werror, -Wincompatible-function-pointer-types-strict] ggtt->vm.insert_entries = gmch_ggtt_insert_entries; ^ ~~~~~~~~~~~~~~~~~~~~~~~~ 2 errors generated. The warning is pointing out that while 'enum i915_cache_level' and 'unsigned int' are ABI compatible, these indirect calls will fail clang's kernel Control Flow Integrity (kCFI) checks, as the callback's signature does not exactly match the prototype's signature. To fix this, replace the cache_level parameter with pat_index, as was done in other places within i915 where there is no difference between cache_level and pat_index on certain generations. Fixes: 9275277d ("drm/i915: use pat_index instead of cache_level") Signed-off-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Reviewed-by: Fei Yang <fei.yang@intel.com> Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230530-i915-gt-cache_level-wincompatible-function-pointer-types-strict-v1-2-54501d598229@kernel.org
-
Nathan Chancellor authored
When booting a kernel compiled with CONFIG_CFI_CLANG (kCFI), there is a CFI failure in ggtt_probe_common() when trying to call hsw_pte_encode() via an indirect call: [ 5.030027] CFI failure at ggtt_probe_common+0xd1/0x130 [i915] (target: hsw_pte_encode+0x0/0x30 [i915]; expected type: 0xf5c1d0fc) With kCFI, indirect calls are validated against their expected type versus actual type and failures occur when the two types do not match. clang's -Wincompatible-function-pointer-types-strict can catch this at compile time but it is not enabled for the kernel yet: drivers/gpu/drm/i915/gt/intel_ggtt.c:1155:23: error: incompatible function pointer types assigning to 'u64 (*)(dma_addr_t, unsigned int, u32)' (aka 'unsigned long long (*)(unsigned int, unsigned int, unsigned int)') from 'u64 (dma_addr_t, enum i915_cache_level, u32)' (aka 'unsigned long long (unsigned int, enum i915_cache_level, unsigned int)') [-Werror,-Wincompatible-function-pointer-types-strict] ggtt->vm.pte_encode = iris_pte_encode; ^ ~~~~~~~~~~~~~~~ drivers/gpu/drm/i915/gt/intel_ggtt.c:1157:23: error: incompatible function pointer types assigning to 'u64 (*)(dma_addr_t, unsigned int, u32)' (aka 'unsigned long long (*)(unsigned int, unsigned int, unsigned int)') from 'u64 (dma_addr_t, enum i915_cache_level, u32)' (aka 'unsigned long long (unsigned int, enum i915_cache_level, unsigned int)') [-Werror,-Wincompatible-function-pointer-types-strict] ggtt->vm.pte_encode = hsw_pte_encode; ^ ~~~~~~~~~~~~~~ drivers/gpu/drm/i915/gt/intel_ggtt.c:1159:23: error: incompatible function pointer types assigning to 'u64 (*)(dma_addr_t, unsigned int, u32)' (aka 'unsigned long long (*)(unsigned int, unsigned int, unsigned int)') from 'u64 (dma_addr_t, enum i915_cache_level, u32)' (aka 'unsigned long long (unsigned int, enum i915_cache_level, unsigned int)') [-Werror,-Wincompatible-function-pointer-types-strict] ggtt->vm.pte_encode = byt_pte_encode; ^ ~~~~~~~~~~~~~~ drivers/gpu/drm/i915/gt/intel_ggtt.c:1161:23: error: incompatible function pointer types assigning to 'u64 (*)(dma_addr_t, unsigned int, u32)' (aka 'unsigned long long (*)(unsigned int, unsigned int, unsigned int)') from 'u64 (dma_addr_t, enum i915_cache_level, u32)' (aka 'unsigned long long (unsigned int, enum i915_cache_level, unsigned int)') [-Werror,-Wincompatible-function-pointer-types-strict] ggtt->vm.pte_encode = ivb_pte_encode; ^ ~~~~~~~~~~~~~~ drivers/gpu/drm/i915/gt/intel_ggtt.c:1163:23: error: incompatible function pointer types assigning to 'u64 (*)(dma_addr_t, unsigned int, u32)' (aka 'unsigned long long (*)(unsigned int, unsigned int, unsigned int)') from 'u64 (dma_addr_t, enum i915_cache_level, u32)' (aka 'unsigned long long (unsigned int, enum i915_cache_level, unsigned int)') [-Werror,-Wincompatible-function-pointer-types-strict] ggtt->vm.pte_encode = snb_pte_encode; ^ ~~~~~~~~~~~~~~ 5 errors generated. In this case, the pre-gen8 pte_encode functions have a second parameter type of 'enum i915_cache_level' whereas the function pointer prototype in 'struct i915_address_space' expects a second parameter type of 'unsigned int'. Update the second parameter of the callbacks and the comment above them noting that these statements are still valid, which matches other functions and files, to clear up the kCFI failures at run time. Fixes: 9275277d ("drm/i915: use pat_index instead of cache_level") Signed-off-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Reviewed-by: Fei Yang <fei.yang@intel.com> Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230530-i915-gt-cache_level-wincompatible-function-pointer-types-strict-v1-1-54501d598229@kernel.org
-
- 01 Jun, 2023 15 commits
-
-
Andi Shyti authored
kernel_context() returns an error pointer. Use pointer-error conversion functions to evaluate its return value, rather than checking for a '0' return. Fixes: eb5c10cb ("drm/i915: Remove I915_USER_PRIORITY_SHIFT") Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: <stable@vger.kernel.org> # v5.13+ Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Acked-by: Tejas Upadhyay <tejas.upadhyay@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230526124138.2006110-1-andi.shyti@linux.intel.com
-
Thomas Zimmermann authored
Implement dedicated fbdev helpers for framebuffer I/O instead of using DRM's helpers. Use an fbdev generator macro for deferred I/O to create the fbdev callbacks. i915 was the only caller of the DRM helpers, so remove them from the helper module. i915's fbdev emulation is still incomplete as it doesn't implement deferred I/O and damage handling for mmaped pages. v4: * generate deferred-I/O helpers * use initializer macros for fb_ops v2: * use FB_IO_HELPERS options Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: "Ville Syrjälä" <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230530151228.22979-14-tzimmermann@suse.de
-
Thomas Zimmermann authored
Implement dedicated fbdev helpers for framebuffer I/O instead of using DRM's helpers. Use an fbdev generator macro for deferred I/O to create the callbacks. Fbdev-generic was the only caller of the DRM helpers, so remove them from the helper module. v4: * generate deferred-I/O helpers * use initializer macros for fb_ops v2: * use FB_SYS_HELPERS_DEFERRED option Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Tested-by: Sui Jingfeng <suijingfeng@loongson.cn> Reviewed-by: Sui Jingfeng <suijingfeng@loongson.cn> Link: https://patchwork.freedesktop.org/patch/msgid/20230530151228.22979-13-tzimmermann@suse.de
-
Thomas Zimmermann authored
Use the regular fbdev helpers for framebuffer I/O instead of DRM's helpers. Msm does not use damage handling, so DRM's fbdev helpers are mere wrappers around the fbdev code. By using fbdev helpers directly within each DRM fbdev emulation, we can eventually remove DRM's wrapper functions entirely. Msm's fbdev emulation has been incomplete as it didn't implement damage handling. Partilly fix this by implementing damage handling for write and draw operation. It is still missing for mmaped pages. v4: * use initializer macros for struct fb_ops * partially support damage handling v2: * use FB_SYS_HELPERS option Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Cc: Rob Clark <robdclark@gmail.com> Cc: Abhinav Kumar <quic_abhinavk@quicinc.com> Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: Sean Paul <sean@poorly.run> Link: https://patchwork.freedesktop.org/patch/msgid/20230530151228.22979-12-tzimmermann@suse.de
-
Thomas Zimmermann authored
Export drm_fb_helper_damage() and drm_fb_helper_damage_range(), which handle damage areas for fbdev emulation. This is a temporary export that allows to move the DRM I/O helpers for fbdev into drivers. Only fbdev-generic and i915 need them. Both will be updated to implement damage handling by themselves and the exported functions will be removed. v4: * update interfaces Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230530151228.22979-11-tzimmermann@suse.de
-
Thomas Zimmermann authored
Use the regular fbdev helpers for framebuffer I/O instead of DRM's helpers. Tegra does not use damage handling, so DRM's fbdev helpers are mere wrappers around the fbdev code. By using fbdev helpers directly within each DRM fbdev emulation, we can eventually remove DRM's wrapper functions entirely. v4: * use initializer macros for struct fb_ops v2: * use FB_SYS_HELPERS option Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Sam Ravnborg <sam@ravnborg.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Mikko Perttunen <mperttunen@nvidia.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230530151228.22979-10-tzimmermann@suse.de
-
Thomas Zimmermann authored
Use the regular fbdev helpers for framebuffer I/O instead of DRM's helpers. Omapdrm does not use damage handling, so DRM's fbdev helpers are mere wrappers around the fbdev code. By using fbdev helpers directly within each DRM fbdev emulation, we can eventually remove DRM's wrapper functions entirely. v4: * use initializer macros for struct fb_ops v2: * use FB_SYS_HELPERS option Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Sam Ravnborg <sam@ravnborg.org> Cc: Tomi Valkeinen <tomba@kernel.org> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230530151228.22979-9-tzimmermann@suse.de
-
Thomas Zimmermann authored
Use the regular fbdev helpers for framebuffer I/O instead of DRM's helpers. Fbdev-dma does not use damage handling, so DRM's fbdev helpers are mere wrappers around the fbdev code. By using fbdev helpers directly within each DRM fbdev emulation, we can eventually remove DRM's wrapper functions entirely. v4: * use initializer macros for struct fb_ops v2: * use FB_SYS_HELPERS option Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230530151228.22979-8-tzimmermann@suse.de
-
Thomas Zimmermann authored
Use the regular fbdev helpers for framebuffer I/O instead of DRM's helpers. Radeon does not use damage handling, so DRM's fbdev helpers are mere wrappers around the fbdev code. By using fbdev helpers directly within each DRM fbdev emulation, we can eventually remove DRM's wrapper functions entirely. v4: * use initializer macros for struct fb_ops v2: * use FB_IO_HELPERS option Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230530151228.22979-7-tzimmermann@suse.de
-
Thomas Zimmermann authored
Use the regular fbdev helpers for framebuffer I/O instead of DRM's helpers. Gma500 does not use damage handling, so DRM's fbdev helpers are mere wrappers around the fbdev code. By using fbdev helpers directly within each DRM fbdev emulation, we can eventually remove DRM's wrapper functions entirely. v4: * use initializer macros for struct fb_ops v2: * use FB_IO_HELPERS option Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Sam Ravnborg <sam@ravnborg.org> Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230530151228.22979-6-tzimmermann@suse.de
-
Thomas Zimmermann authored
Use the regular fbdev helpers for framebuffer I/O instead of DRM's helpers. Exynos does not use damage handling, so DRM's fbdev helpers are mere wrappers around the fbdev code. By using fbdev helpers directly within each DRM fbdev emulation, we can eventually remove DRM's wrapper functions entirely. v4: * use initializer macros for struct fb_ops v3: * don't reorder Makefile rules (Sam) v2: * use FB_IO_HELPERS option Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Sam Ravnborg <sam@ravnborg.org> Cc: Inki Dae <inki.dae@samsung.com> Cc: Seung-Woo Kim <sw0312.kim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Cc: Alim Akhtar <alim.akhtar@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230530151228.22979-5-tzimmermann@suse.de
-
Thomas Zimmermann authored
Use the regular fbdev helpers for framebuffer I/O instead of DRM's helpers. Armada does not use damage handling, so DRM's fbdev helpers are mere wrappers around the fbdev code. By using fbdev helpers directly within each DRM fbdev emulation, we can eventually remove DRM's wrapper functions entirely. v4: * use initializer macros for struct fb_ops v2: * use FB_IO_HELPERS option Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Sam Ravnborg <sam@ravnborg.org> Cc: Russell King <linux@armlinux.org.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20230530151228.22979-4-tzimmermann@suse.de
-
Thomas Zimmermann authored
For framebuffers in I/O and system memory, add macros that set struct fb_ops to the respective callback functions. For deferred I/O, add macros that generate callback functions with damage handling. Add initializer macros that set struct fb_ops to the generated callbacks. These macros can remove a lot boilerplate code from fbdev drivers. The drivers are supposed to use the macro that is required for its framebuffer. Each macro is split into smaller helpers, so that drivers with non-standard callbacks can pick and customize callbacks as needed. There are individual helper macros for read/write, mmap and drawing. v5: * fix whitespace errors (Jingfeng) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230530151228.22979-3-tzimmermann@suse.de
-
Thomas Zimmermann authored
Many fbdev drivers use the same set of fb_ops helpers. Add Kconfig options to select them at once. This will help with making DRM's fbdev emulation code more modular, but can also be used to simplify fbdev's driver configs. v3: * fix select statement (Jingfeng) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Sui Jingfeng <suijingfeng@loongson.cn> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230530151228.22979-2-tzimmermann@suse.de
-
Thomas Zimmermann authored
Backmerging from drm-next to get commit e24e6d69 ("drm/i915/display: Implement fb_mmap callback function"). Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
-