Signed-off-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

Instead of looking for supported_rates change on every tx packet,
just extract the supported_rates after association completes (station only).

Remove wl1271.sta_rate_set and WL1271_FLAG_STA_RATES_CHANGED which are
not used anymore.
Signed-off-by: Eliad Peller <eliad@wizery.com>
Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>

make the configuration management more flexible by using the
conf struct, rather than predefined macros.
Signed-off-by: Eliad Peller <eliad@wizery.com>
Reviewed-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>

This patch adds support for the new wl12xx firmware (Rev 6.1.3.50.49)

Since this fw is not backward compatible with previous fw versions,
a new fw (with different name) is being fetched.

(the patch is big because it contains all the required fw api changes.
splitting it into multiple patches will result in corrupted intermediate
commits)
Signed-off-by: Eliad Peller <eliad@wizery.com>
Reviewed-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>

mcp2.5 uses this acx to configure the fw only once, rather than
passing the params in every enter psm command.
Signed-off-by: Eliad Peller <eliad@wizery.com>
Reviewed-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>

Change hcid to bluetoothd.
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

Also moves some L2CAP sending functions declaration to l2cap.h
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

Declare __l2cap_wait_ack() and  l2cap_sock_clear_timer() in l2cap.h
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

It causes the move of the declaration of 3 functions to l2cap.h:
l2cap_get_ident(), l2cap_send_cmd(), l2cap_build_conf_req()
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

First step to move all l2cap_sock_ops function to l2cap_sock.c
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

This patch tries to do the minimal to move l2cap_sock_create() and its
dependencies to l2cap_sock.c. It create a API to initialize and cleanup
the L2CAP sockets from l2cap_core.c through l2cap_init_sockets() and
l2cap_cleanup_sockets().
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

In a preparation to the the L2CAP code split in many files.
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

In commit 86e09287, to reduce memory
usage, the functions of the ath3k module were rewritten to release the
firmware blob after it has been loaded (successfully or not).

The resuting code has some redundancy and the compiler can potentially
produce better code if we omit a function call that is unconditionally
executed in

,----
|     if (ath3k_load_firmware(udev, firmware)) {
|             release_firmware(firmware);
|             return -EIO;
|     }
|     release_firmware(firmware);
|
|     return 0;
| }
`----

It may also be argued that the rewritten code becomes easier to read,
and also to see the code coverage of the snippet in question.
Signed-off-by: Rogério Brito <rbrito@ime.usp.br>
Cc: Alexander Holler <holler@ahsoftware.de>
Cc: "Gustavo F. Padovan" <padovan@profusion.mobi>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

Crash can happen when tasklet handling connect/disconnect requests
preempts socket accept. Can be reproduced with "l2test -r" on one
side and several "l2test -c -b 1000 -i hci0 -P 10 <bdaddr>" on the
other side.

disable taskets in socket accept and change lock_sock and release_sock
to bh_lock_sock and bh_unlock_sock since we have to use spinlocks and
there is no need to mark sock as owned by user.

...
[ 3555.897247] Unable to handle kernel NULL pointer dereference at virtual
address 000000bc
[ 3555.915039] pgd = cab9c000
[ 3555.917785] [000000bc] *pgd=8bf3d031, *pte=00000000, *ppte=00000000
[ 3555.928314] Internal error: Oops: 17 [#1] PREEMPT
[ 3555.999786] CPU: 0    Not tainted  (2.6.32.21-13874-g67918ef #65)
...
[ 3556.005981] PC is at bt_accept_unlink+0x20/0x58 [bluetooth]
[ 3556.011627] LR is at bt_accept_dequeue+0x3c/0xe8 [bluetooth]
...
[ 3556.161285] [<bf0007fc>] (bt_accept_unlink+0x20/0x58 [bluetooth]) from
[<bf000870>] (bt_accept_dequeue+0x3c/0xe8 [bluetooth])
[ 3556.172729] [<bf000870>] (bt_accept_dequeue+0x3c/0xe8 [bluetooth]) from
[<bf324df8>] (l2cap_sock_accept+0x100/0x15c [l2cap])
[ 3556.184082] [<bf324df8>] (l2cap_sock_accept+0x100/0x15c [l2cap]) from
[<c026a0a8>] (sys_accept4+0x120/0x1e0)
[ 3556.193969] [<c026a0a8>] (sys_accept4+0x120/0x1e0) from [<c002c9a0>]
(ret_fast_syscall+0x0/0x2c)
[ 3556.202819] Code: e5813000 e5901164 e580c160 e580c15c (e1d13bbc)
...
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@nokia.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

Fix checkpatch warnings concerning assignments in if conditions.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@nokia.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

This patch adds a new set_io_capability management command which is used
to set the IO capability for Secure Simple Pairing (SSP) as well as the
Security Manager Protocol (SMP). The value is per hci_dev and each
hci_conn object inherits it upon creation.
Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

This patch adds the necessary commands and events needed to communicate
PIN code related actions between the kernel and userspace. This includes
a pin_code_request event as well as pin_code_reply and
pin_code_negative_reply commands.
Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

A lot of management code needs to generate command complete events so it
makes sense to have a helper function for this.
Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

This patch adds a get_connections command to the management interface.
With this command userspace can get the current list of connected
devices. Typically this command would only be used once when enumerating
existing adapters. After that the connected and disconnected events are
used to track connections.
Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

This patch add a new connect failed management event to track failures
in connecting to remote devices. It is particularly useful for security
mode 3 scenarios when we don't have a connected state while pairing but
still need to detect when the connect attempt failed.
Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

This patch adds a disconnect command to the managment interface. Using
this command user space is able to force the disconnection of connected
devices. The command maps directly to the Disconnect HCI command.
Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

This patch adds connected and disconnected managment events to track the
connection status to remote devices. The events map directly to
successful connection complete and disconnection complete HCI events for
ACL links.
Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

This patch adds a management commands to feed the kernel with all stored
link keys as well as remove specific ones or all of them. Once the
load_keys command has been called the kernel takes over link key
replies. A new_key event is also added to inform userspace of newly
created link keys that should be stored permanently.
Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

This patch adds the possibility for user space to fully control the
Class of Device value of local adapters. To control the service class
bits each UUID that's added comes with a service class "hint" which acts
as a mask of bits that the UUID needs to have enabled. The
set_service_cache management command is used to make sure we queue up
all UUID changes as user space initializes its drivers and then send a
single HCI_Write_Class_of_Device command when initialization is
complete.
Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

Using the managment interface means that user space doesn't need to do
any HCI command sending at all. This patch moves the remaining
initialization commands from user space to the kernel side. The patch
makes use of the new feature of __hci_request which allows the request
to be dynamically modified while it is ongoing (something that is needed
to react appropriately to the local features and the version of the
adapter).
Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

User space should set the page timeout so there's no need to explicitly
set it in the HCI init sequence. Even if user space fails to set it the
controller default value will be used.
Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

The controller may have link keys in its own memory and these keys could
be used for secure connections. However, since the interface to access
these keys doesn't provide information about the key types (which would
be needed to infer the level of security each key provides) using these
keys is rather useless. Therefore, simply clear the controller side list
in the initialization procedure.
Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

To support a more dynamic HCI initialization sequence the __hci_request
behavior requires some more changes. Particularly, the init sequence
should be able to have conditionals in it (sending some HCI commands
depending on the outcome of a previous command) instead of being a fixed
list as it is right now.

The reasons for these additional requirements are the moving all
previously user space driven initialization commands to the kernel side
as well as the support the Low Energy controllers.

To fulfull these requirements the init sequence is made the only special
case for multi-command requests and req_last_cmd is renamed to
init_last_cmd. The hci_send_cmd function is changed to update
init_last_cmd as long as the HCI_INIT flag is set.
Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

This patch adds the necessary logic to act accordingly when the
HCI_PAIRABLE flag is not set. In that case PIN code replies as well as
Secure Simple Pairing requests without a NoBonding requirement need to
be rejected.
Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>