- 19 Oct, 2015 2 commits
-
-
Takuya Yoshikawa authored
Commit fd136902 ("KVM: x86: MMU: Move mapping_level_dirty_bitmap() call in mapping_level()") forgot to initialize force_pt_level to false in FNAME(page_fault)() before calling mapping_level() like nonpaging_map() does. This can sometimes result in forcing page table level mapping unnecessarily. Fix this and move the first *force_pt_level check in mapping_level() before kvm_vcpu_gfn_to_memslot() call to make it a bit clearer that the variable must be initialized before mapping_level() gets called. This change can also avoid calling kvm_vcpu_gfn_to_memslot() when !check_hugepage_cache_consistency() check in tdp_page_fault() forces page table level mapping. Signed-off-by: Takuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-
Paolo Bonzini authored
Not zeroing EFER means that a 32-bit firmware cannot enter paging mode without clearing EFER.LME first (which it should not know about). Yang Zhang from Intel confirmed that the manual is wrong and EFER is cleared to zero on INIT. Fixes: d28bc9dd Cc: stable@vger.kernel.org Cc: Yang Z Zhang <yang.z.zhang@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-
- 16 Oct, 2015 15 commits
-
-
Andrey Smetanin authored
Any other irq routing types (MSI, S390_ADAPTER, upcoming Hyper-V SynIC) map one-to-one to GSI. Signed-off-by: Andrey Smetanin <asmetanin@virtuozzo.com> Reviewed-by: Roman Kagan <rkagan@virtuozzo.com> Signed-off-by: Denis V. Lunev <den@openvz.org> CC: Vitaly Kuznetsov <vkuznets@redhat.com> CC: "K. Y. Srinivasan" <kys@microsoft.com> CC: Gleb Natapov <gleb@kernel.org> CC: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-
Andrey Smetanin authored
Allow for arch-specific interrupt types to be set. For that, add kvm_arch_set_irq() which takes interrupt type-specific action if it recognizes the interrupt type given, and -EWOULDBLOCK otherwise. The default implementation always returns -EWOULDBLOCK. Signed-off-by: Andrey Smetanin <asmetanin@virtuozzo.com> Reviewed-by: Roman Kagan <rkagan@virtuozzo.com> Signed-off-by: Denis V. Lunev <den@openvz.org> CC: Vitaly Kuznetsov <vkuznets@redhat.com> CC: "K. Y. Srinivasan" <kys@microsoft.com> CC: Gleb Natapov <gleb@kernel.org> CC: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-
Andrey Smetanin authored
Factor out kvm_notify_acked_gsi() helper to iterate over EOI listeners and notify those matching the given gsi. It will be reused in the upcoming Hyper-V SynIC implementation. Signed-off-by: Andrey Smetanin <asmetanin@virtuozzo.com> Reviewed-by: Roman Kagan <rkagan@virtuozzo.com> Signed-off-by: Denis V. Lunev <den@openvz.org> CC: Vitaly Kuznetsov <vkuznets@redhat.com> CC: "K. Y. Srinivasan" <kys@microsoft.com> CC: Gleb Natapov <gleb@kernel.org> CC: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-
Andrey Smetanin authored
The loop(for) inside irqfd_update() is unnecessary because any other value for irq_entry.type will just trigger schedule_work(&irqfd->inject) in irqfd_wakeup. Signed-off-by: Andrey Smetanin <asmetanin@virtuozzo.com> Reviewed-by: Roman Kagan <rkagan@virtuozzo.com> Signed-off-by: Denis V. Lunev <den@openvz.org> CC: Vitaly Kuznetsov <vkuznets@redhat.com> CC: "K. Y. Srinivasan" <kys@microsoft.com> CC: Gleb Natapov <gleb@kernel.org> CC: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-
Marcelo Tosatti authored
As reported at https://bugs.launchpad.net/qemu/+bug/1494350, it is possible to have vcpu->arch.st.last_steal initialized from a thread other than vcpu thread, say the iothread, via KVM_SET_MSRS. Which can cause an overflow later (when subtracting from vcpu threads sched_info.run_delay). To avoid that, move steal time accumulation to vcpu entry time, before copying steal time data to guest. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Reviewed-by: David Matlack <dmatlack@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-
Takuya Yoshikawa authored
Calling kvm_vcpu_gfn_to_memslot() twice in mapping_level() should be avoided since getting a slot by binary search may not be negligible, especially for virtual machines with many memory slots. Signed-off-by: Takuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-
Takuya Yoshikawa authored
Now that it has only one caller, and its name is not so helpful for readers, remove it. The new memslot_valid_for_gpte() function makes it possible to share the common code between gfn_to_memslot_dirty_bitmap() and mapping_level(). Signed-off-by: Takuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-
Takuya Yoshikawa authored
This is necessary to eliminate an extra memory slot search later. Signed-off-by: Takuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-
Takuya Yoshikawa authored
As a bonus, an extra memory slot search can be eliminated when is_self_change_mapping is true. Signed-off-by: Takuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-
Takuya Yoshikawa authored
This will be passed to a function later. Signed-off-by: Takuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-
Joerg Roedel authored
Currently we always write the next_rip of the shadow vmcb to the guests vmcb when we emulate a vmexit. This could confuse the guest when its cpuid indicated no support for the next_rip feature. Fix this by only propagating next_rip if the guest actually supports it. Cc: Bandan Das <bsd@redhat.com> Cc: Dirk Mueller <dmueller@suse.com> Tested-By: Dirk Mueller <dmueller@suse.com> Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-
Paolo Bonzini authored
The loop is computing one of two constants, it can be simpler to write everything inline. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-
Wanpeng Li authored
Expose VPID capability to L1. For nested guests, we don't do anything specific for single context invalidation. Hence, only advertise support for global context invalidation. The major benefit of nested VPID comes from having separate vpids when switching between L1 and L2, and also when L2's vCPUs not sched in/out on L1. Reviewed-by: Wincy Van <fanwenyi0529@gmail.com> Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-
Wanpeng Li authored
VPID is used to tag address space and avoid a TLB flush. Currently L0 use the same VPID to run L1 and all its guests. KVM flushes VPID when switching between L1 and L2. This patch advertises VPID to the L1 hypervisor, then address space of L1 and L2 can be separately treated and avoid TLB flush when swithing between L1 and L2. For each nested vmentry, if vpid12 is changed, reuse shadow vpid w/ an invvpid. Performance: run lmbench on L2 w/ 3.5 kernel. Context switching - times in microseconds - smaller is better ------------------------------------------------------------------------- Host OS 2p/0K 2p/16K 2p/64K 8p/16K 8p/64K 16p/16K 16p/64K ctxsw ctxsw ctxsw ctxsw ctxsw ctxsw ctxsw --------- ------------- ------ ------ ------ ------ ------ ------- ------- kernel Linux 3.5.0-1 1.2200 1.3700 1.4500 4.7800 2.3300 5.60000 2.88000 nested VPID kernel Linux 3.5.0-1 1.2600 1.4300 1.5600 12.7 12.9 3.49000 7.46000 vanilla Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Wincy Van <fanwenyi0529@gmail.com> Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-
Wanpeng Li authored
Add the INVVPID instruction emulation. Reviewed-by: Wincy Van <fanwenyi0529@gmail.com> Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-
- 14 Oct, 2015 9 commits
-
-
Wanpeng Li authored
Introduce __vmx_flush_tlb() to handle specific vpid. Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-
Wanpeng Li authored
Adjust allocate/free_vid so that they can be reused for the nested vpid. Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-
Kosuke Tatsukawa authored
async_pf_execute() seems to be missing a memory barrier which might cause the waker to not notice the waiter and miss sending a wake_up as in the following figure. async_pf_execute kvm_vcpu_block ------------------------------------------------------------------------ spin_lock(&vcpu->async_pf.lock); if (waitqueue_active(&vcpu->wq)) /* The CPU might reorder the test for the waitqueue up here, before prior writes complete */ prepare_to_wait(&vcpu->wq, &wait, TASK_INTERRUPTIBLE); /*if (kvm_vcpu_check_block(vcpu) < 0) */ /*if (kvm_arch_vcpu_runnable(vcpu)) { */ ... return (vcpu->arch.mp_state == KVM_MP_STATE_RUNNABLE && !vcpu->arch.apf.halted) || !list_empty_careful(&vcpu->async_pf.done) ... return 0; list_add_tail(&apf->link, &vcpu->async_pf.done); spin_unlock(&vcpu->async_pf.lock); waited = true; schedule(); ------------------------------------------------------------------------ The attached patch adds the missing memory barrier. I found this issue when I was looking through the linux source code for places calling waitqueue_active() before wake_up*(), but without preceding memory barriers, after sending a patch to fix a similar issue in drivers/tty/n_tty.c (Details about the original issue can be found here: https://lkml.org/lkml/2015/9/28/849). Signed-off-by: Kosuke Tatsukawa <tatsu@ab.jp.nec.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-
Radim Krčmář authored
On real hardware, edge-triggered interrupts don't set a bit in TMR, which means that IOAPIC isn't notified on EOI. Do the same here. Staying in guest/kernel mode after edge EOI is what we want for most devices. If some bugs could be nicely worked around with edge EOI notifications, we should invest in a better interface. Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-
Radim Krčmář authored
KVM uses eoi_exit_bitmap to track vectors that need an action on EOI. The problem is that IOAPIC can be reconfigured while an interrupt with old configuration is pending and eoi_exit_bitmap only remembers the newest configuration; thus EOI from the pending interrupt is not recognized. (Reconfiguration is not a problem for level interrupts, because IOAPIC sends interrupt with the new configuration.) For an edge interrupt with ACK notifiers, like i8254 timer; things can happen in this order 1) IOAPIC inject a vector from i8254 2) guest reconfigures that vector's VCPU and therefore eoi_exit_bitmap on original VCPU gets cleared 3) guest's handler for the vector does EOI 4) KVM's EOI handler doesn't pass that vector to IOAPIC because it is not in that VCPU's eoi_exit_bitmap 5) i8254 stops working A simple solution is to set the IOAPIC vector in eoi_exit_bitmap if the vector is in PIR/IRR/ISR. This creates an unwanted situation if the vector is reused by a non-IOAPIC source, but I think it is so rare that we don't want to make the solution more sophisticated. The simple solution also doesn't work if we are reconfiguring the vector. (Shouldn't happen in the wild and I'd rather fix users of ACK notifiers instead of working around that.) The are no races because ioapic injection and reconfig are locked. Fixes: b053b2ae ("KVM: x86: Add EOI exit bitmap inference") [Before b053b2ae, this bug happened only with APICv.] Fixes: c7c9c56c ("x86, apicv: add virtual interrupt delivery support") Cc: <stable@vger.kernel.org> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-
Radim Krčmář authored
After moving PIR to IRR, the interrupt needs to be delivered manually. Reported-by: Paolo Bonzini <pbonzini@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-
Paolo Bonzini authored
Merge more important SMM fixes.
-
Paolo Bonzini authored
In order to get into 64-bit protected mode, you need to enable paging while EFER.LMA=1. For this to work, CS.L must be 0. Currently, we load the segments before CR0 and CR4, which means that if RSM returns into 64-bit protected mode CS.L is already 1 and everything breaks. Luckily, CS.L=0 is always the case when executing RSM, because it is forbidden to execute RSM from 64-bit protected mode. Hence it is enough to load CR0 and CR4 first, and only then the segments. Fixes: 660a5d51 Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-
Paolo Bonzini authored
Unfortunately I only noticed this after pushing. Fixes: f0d648bd Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-
- 13 Oct, 2015 14 commits
-
-
Paolo Bonzini authored
This merge brings in a couple important SMM fixes, which makes it easier to test latest KVM with unrestricted_guest=0 and to test the in-progress work on SMM support in the firmware. Conflicts: arch/x86/kvm/x86.c
-
Paolo Bonzini authored
An SMI to a halted VCPU must wake it up, hence a VCPU with a pending SMI must be considered runnable. Fixes: 64d60670 Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-
Paolo Bonzini authored
Split the huge conditional in two functions. Fixes: 64d60670 Cc: stable@vger.kernel.org Reviewed-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-
Paolo Bonzini authored
Otherwise, two copies (one of them never populated and thus bogus) are allocated for the regular and SMM address spaces. This breaks SMM with EPT but without unrestricted guest support, because the SMM copy of the identity page map is all zeros. By moving the allocation to the caller we also remove the last vestiges of kernel-allocated memory regions (not accessible anymore in userspace since commit b74a07be, "KVM: Remove kernel-allocated memory regions", 2010-06-21); that is a nice bonus. Reported-by: Alexandre DERUMIER <aderumier@odiso.com> Cc: stable@vger.kernel.org Fixes: 9da0e4d5Reviewed-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-
Paolo Bonzini authored
The next patch will make x86_set_memory_region fill the userspace_addr. Since the struct is not used untouched anymore, it makes sense to build it in x86_set_memory_region directly; it also simplifies the callers. Reported-by: Alexandre DERUMIER <aderumier@odiso.com> Cc: stable@vger.kernel.org Fixes: 9da0e4d5Reviewed-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-
Paolo Bonzini authored
Merge tag 'kvm-s390-next-20151013' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD KVM: s390: Fixes for 4.4 A bunch of fixes and optimizations for interrupt and time handling. No fix is important enough to qualify for 4.3 or stable.
-
David Hildenbrand authored
Let's factor this out and always use get_tod_clock_fast() when reading the guest TOD. STORE CLOCK FAST does not do serialization and, therefore, might result in some fuzziness between different processors in a way that subsequent calls on different CPUs might have time stamps that are earlier. This semantics is fine though for all KVM use cases. To make it obvious that the new function has STORE CLOCK FAST semantics we name it kvm_s390_get_tod_clock_fast. With this patch, we only have a handful of places were we have to care about STP sync (using preempt_disable() logic). Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
-
David Hildenbrand authored
Let's move that whole logic into one function. We now always use unsigned values when calculating the epoch (to avoid over/underflow defined). Also, we always have to get all VCPUs out of SIE before doing the update to avoid running differing VCPUs with different TODs. Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
-
David Hildenbrand authored
Nobody except early.c makes use of store_tod_clock() to handle the cc. So if we would get a cc != 0, we would be in more trouble. Let's replace all users with get_tod_clock(). Returning a cc on an ioctl sounded strange either way. We can now also easily move the get_tod_clock() call into the preempt_disable() section. This is in fact necessary to make the STP sync work as expected. Otherwise the host TOD could change and we would end up with a wrong epoch calculation. Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
-
David Hildenbrand authored
PER events can always co-exist with other program interrupts. For now, we always overwrite all program interrupt parameters when injecting any type of program interrupt. Let's handle that correctly by only overwriting the relevant portion of the program interrupt parameters. Therefore we can now inject PER events and ordinary program interrupts concurrently, resulting in no loss of program interrupts. This will especially by helpful when manually detecting PER events later - as both types might be triggered during one SIE exit. Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
-
David Hildenbrand authored
The main reason to keep program injection in kernel separated until now was that we were able to do some checking, if really only the owning thread injects program interrupts (via waitqueue_active(li->wq)). This BUG_ON was never triggered and the chances of really hitting it, if another thread injected a program irq to another vcpu, were very small. Let's drop this check and turn kvm_s390_inject_program_int() and kvm_s390_inject_prog_irq() into simple inline functions that makes use of kvm_s390_inject_vcpu(). __must_check can be dropped as they are implicitely given by kvm_s390_inject_vcpu(), to avoid ugly long function prototypes. Reviewed-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
-
David Hildenbrand authored
Let's get rid of the local variable and exit directly if we found any pending interrupt. This is not only faster, but also better readable. Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
-
David Hildenbrand authored
We can remove that double check. Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
-
David Hildenbrand authored
No need to separate pending and floating irqs when setting interception requests. Let's do it for all equally. Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
-