- 03 Oct, 2018 2 commits
-
-
Eli Britstein authored
Return extack messages for failures in the e-switch devlink callbacks. Messages provide reasons for not being able to issue the operation. Signed-off-by:
Eli Britstein <elibr@mellanox.com> Reviewed-by:
Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by:
Roi Dayan <roid@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com>
-
Eli Britstein authored
Add extack argument to the eswitch related operations. Signed-off-by:
-
- 02 Oct, 2018 37 commits
-
-
Rob Herring authored
In preparation to remove the node name pointer from struct device_node, convert printf users to use the %pOFn format specifier. Cc: Andrew Lunn <andrew@lunn.ch> Cc: "David S. Miller" <davem@davemloft.net> Cc: netdev@vger.kernel.org Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
In the recent TCP/EDT patch series, I switched TCP and sch_fq clocks from MONOTONIC to TAI, in order to meet the choice done earlier for sch_etf packet scheduler. But sure enough, this broke some setups were the TAI clock jumps forward (by almost 50 year...), as reported by Leonard Crestez. If we want to converge later, we'll probably need to add an skb field to differentiate the clock bases, or a socket option. In the meantime, an UDP application will need to use CLOCK_MONOTONIC base for its SCM_TXTIME timestamps if using fq packet scheduler. Fixes: 72b0094f ("tcp: switch tcp_clock_ns() to CLOCK_TAI base") Fixes: 142537e4 ("net_sched: sch_fq: switch to CLOCK_TAI") Fixes: fd2bca2a ("tcp: switch internal pacing timer to CLOCK_TAI") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
Leonard Crestez <leonard.crestez@nxp.com> Tested-by:
-
Vakul Garg authored
TLS test cases splice_from_pipe, send_and_splice & recv_peek_multiple_records expect to receive a given nummber of bytes and then compare them against the number of bytes which were sent. Therefore, system call recv() must not return before receiving the requested number of bytes, otherwise the subsequent memcmp() fails. This patch passes MSG_WAITALL flag to recv() so that it does not return prematurely before requested number of bytes are copied to receive buffer. Signed-off-by:
Vakul Garg <vakul.garg@nxp.com> Signed-off-by:
-
Haiyang Zhang authored
The RSC feature -- a bit field "internal" was added here with total size unchanged: struct rndis_per_packet_info { u32 size; u32 type:31; u32 internal:1; u32 ppi_offset; }; On TX path, we put rndis msg into skb head room, which is not zeroed before passing to us. We do not use the "internal" field in TX path, but it may impact older hosts which use the entire 32 bits as "type". To fix the bug, this patch sets the field "internal" to zero. Fixes: c8e4eff4 ("hv_netvsc: Add support for LRO/RSC in the vSwitch") Signed-off-by:Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by:
-
Heiner Kallweit authored
Using mod_delayed_work() allows to simplify handling delayed work and removes the need for the sync parameter in phy_trigger_machine(). Also introduce a helper phy_queue_state_machine() to encapsulate the low-level delayed work calls. No functional change intended. Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
-
David S. Miller authored
Florian Fainelli says: ==================== net: systemport: Turn on offloads by default Up until now, we had added all the code necessary to turn on RX/TX checksum offloads at runtime, but there is no reason why they have to be disabled by default given that this gives a slight performance improvement. ==================== Signed-off-by: -
Florian Fainelli authored
When inserting the TSB, keep track of how many times we had to do it and if there was a failure in doing so, this helps profile the driver for possibly incorrect headroom settings. Signed-off-by:
-
Florian Fainelli authored
During bcm_sysport_insert_tsb() make sure we differentiate a SKB headroom re-allocation failure from the normal swap and replace path. Signed-off-by:
-
Florian Fainelli authored
We can turn on the RX/TX checksum offloads by default and make sure that those are properly reflected back to e.g: stacked devices such as VLAN or DSA. Signed-off-by:
-
Florian Fainelli authored
During driver resume and open, the HW may have lost its context/state, utilize bcm_sysport_set_features() to make sure we do restore the correct set of features that were previously configured. Signed-off-by:
-
Florian Fainelli authored
In preparation for unconditionally enabling TX and RX checksum offloads, refactor bcm_sysport_set_features() a bit such that __netdev_update_features() during register_netdev() can make sure that features are correctly programmed during network device registration. Since we can now be called during register_netdev() with clocks gated, we need to temporarily turn them on/off in order to have a successful register programming. We also move the CRC forward setting read into bcm_sysport_set_features() since priv->crc_fwd matters while turning on RX checksum offload, that way we are guaranteed they are in sync in case we ever add support for NETIF_F_RXFCS at some point in the future. Signed-off-by:
-
Cong Wang authored
When tcf_block_find() fails, it already rollbacks the qdisc refcnt, so its caller doesn't need to clean up this again. Avoid calling qdisc_put() again by resetting qdisc to NULL for callers. Reported-by: syzbot+37b8770e6d5a8220a039@syzkaller.appspotmail.com Fixes: e368fdb6 ("net: sched: use Qdisc rcu API instead of relying on rtnl lock") Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
David S. Miller authored
Johannes Berg says: ==================== netlink: extended attribute validation This adds further netlink attribute validation: * min/max/range validation * validation through a custom function pointer This is useful to * reduce boilerplate code in command handling code, if attributes are used commonly across different commands * get more extended ACK error messages/attribute pointers * ensure attributes are valid even when ignored (though this might be a problem when converting existing code) Changes since v1: * split off validate_type from type and use that for min/max/range and function; this is better because the range is limited to the range of s16 and so things like "u16 with minimum value 1" couldn't be expressed earlier * add macros for this, e.g. NLA_POLICY_MIN(NLA_U16, 1) for the case mentioned in the previous bullet Using this pretty much in all places where applicable in nl80211 reduces the code size there by about 1.8KiB, with just a minimal code increase in lib/nlattr.o. ==================== Signed-off-by: -
Johannes Berg authored
Add the ability to have an arbitrary validation function attached to a netlink policy that doesn't already use the validation_data pointer in another way. This can be useful to validate for example the content of a binary attribute, like in nl80211 the "(information) elements", which must be valid streams of "u8 type, u8 length, u8 value[length]". Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Johannes Berg authored
Without further bloating the policy structs, we can overload the `validation_data' pointer with a struct of s16 min, max and use those to validate ranges in NLA_{U,S}{8,16,32,64} attributes. It may sound strange to validate NLA_U32 with a s16 max, but in many cases NLA_U32 is used for enums etc. since there's no size benefit in using a smaller attribute width anyway, due to netlink attribute alignment; in cases like that it's still useful, particularly when the attribute really transports an enum value. Doing so lets us remove quite a bit of validation code, if we can be sure that these attributes aren't used by userspace in places where they're ignored today. To achieve all this, split the 'type' field and introduce a new 'validation_type' field which indicates what further validation (beyond the validation prescribed by the type of the attribute) is done. This currently allows for no further validation (the default), as well as min, max and range checks. Signed-off-by: -
David S. Miller authored
Salil Mehta says: ==================== Support of Flow Director in HNS3 Ethernet Driver for HiP08 Rev2 SoC This patch-set adds the support of FD(Flow Director) in the HNS3 PF driver for HiP08 Rev2(0x21) SoC of Hisilicon. FD can be used in filtering the flows and deciding to drop the flow or forward it to paricular queue. Configuration consists of rules with input keys and actions. The rules are stored in TCAM. ==================== Signed-off-by: -
Jian Shen authored
This patch adds switch for flow director with ethtool command Signed-off-by:
Jian Shen <shenjian15@huawei.com> Signed-off-by:
Peng Li <lipeng321@huawei.com> Signed-off-by:
Salil Mehta <salil.mehta@huawei.com> Signed-off-by:
-
Jian Shen authored
This patch removes all flow director rules when unload hns3 driver. Signed-off-by:
-
Jian Shen authored
When doing reset, remove all entries in TCAM block, and keep flow director rules list. After finishing reset, restore all entries. Signed-off-by:
-
Jian Shen authored
This patch adds support for querying rule number and rule details by ethtool commands. Signed-off-by:
-
Jian Shen authored
This patch adds support for add and delete rule by ethtool commands. HNS3 driver supports several flow types, include ETHER_FLOW, IP_USER_FLOW, TCP_V4_FLOW, UDP_V4_FLOW, SCTP_V4_FLOW, IPV6_USER_FLOW, TCP_V6_FLOW, UDP_V6_FLOW and SCTP_V6_FLOW. Signed-off-by:
-
Jian Shen authored
Each flow director rule consists of input key and action. The input key is the condition for matching, includes tuples of L2/L3/L4 header. Action is the behaviour when a packet matches with the input key, such as drop the packet, or forward to a specified queue. The input key is stored in the tcam blocks, Each bit of input key can be masked. Signed-off-by:
-
Jian Shen authored
Flow director is a new feature supported by hardware with revision 0x21. This patch adds flow direcor initialization for each PF. It queries flow director mode and tcam resource from firmware, selects tuples used for input key. Signed-off-by:
-
David S. Miller authored
Andrew Lunn says: ==================== Continue towards using linkmode in phylib These patches contain some further cleanup and helpers, and the first real patch towards using linkmode bitmaps in phylink. The macro magic in the RFC version has been replaced with run time initialisation. ==================== Signed-off-by: -
Andrew Lunn authored
This is one step in allowing phylib to make use of link_mode bitmaps, instead of u32 for supported and advertised features. Convert the phy drivers to use bitmaps to indicates the features they support. Build bitmap equivalents of the u32 values at runtime, and have the drivers point to the appropriate bitmap. These bitmaps are shared, and we don't want a driver to modify them. So mark them __ro_after_init. Within phylib, the features bitmap is currently turned back into a u32. This will be removed once the whole of phylib, and the drivers are converted to use bitmaps. Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Andrew Lunn authored
The macro PHY_GBIT_FEAUTRES needs to change into a bitmap in order to support link_modes. Remove its use from xgde by replacing it with its definition. Probably, the current behavior is wrong. It probably should be ANDing not assigning. Signed-off-by:
-
Andrew Lunn authored
Add helpers which take a linkmode rather than a u32 ethtool for advertising settings. Signed-off-by:
Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by:
-
Andrew Lunn authored
Add a helper to convert the local advertising to an LCL capabilities, which is then used to resolve pause flow control settings. Signed-off-by:
-
Andrew Lunn authored
The phy_mii_ioctl can be used to write a value into the MII_ADVERTISE register in the PHY. Since this changes the state of the PHY, we need to make the same change to phydev->advertising. Add a helper which can convert the register value to a linkmode. Signed-off-by:
-
Andrew Lunn authored
Add phydev_info() and make use of it within the phy drivers and core code. Signed-off-by:
-
Andrew Lunn authored
Not all new style LINK_MODE bits can be converted into old style SUPPORTED bits. We need to warn when such a conversion is attempted. Add a helper for this. Convert all pr_warn() calls to phydev_warn() where possible. Signed-off-by:
-
Andrew Lunn authored
phylink has some useful helpers to working with linkmode bitmaps. Move them to there own header so other code can use them. Signed-off-by:
-
Jakub Kicinski authored
Reserve two TLV types for feature development, and warn in the driver if they ever leak into production. Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by:
Simon Horman <simon.horman@netronome.com> Signed-off-by:
-
Moritz Fischer authored
Address compiler warning reported by kbuild autobuilders when building for i386 as a result of dma_addr_t size on different architectures. warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] Fixes: 7e8d5755 ("net: nixge: Add support for 64-bit platforms") Signed-off-by:
Moritz Fischer <mdf@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Soheil Hassas Yeganeh authored
When SKBs are coalesced, we can have SKBs with different frag sizes. Some with PAGE_SIZE and some not with PAGE_SIZE. Since recv_skip_hint is always set to the full SKB size, it can overestimate the amount that should be read using normal read for coalesced packets. Change the recv_skip_hint so that it only includes the first frags that are not of PAGE_SIZE. Signed-off-by:
Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by:
-
Soheil Hassas Yeganeh authored
When we have less than PAGE_SIZE of data on receive queue, we set recv_skip_hint to 0. Instead, set it to the actual number of bytes available. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-nextDavid S. Miller authored
Steffen Klassert says: ==================== pull request (net-next): ipsec-next 2018-10-01 1) Make xfrmi_get_link_net() static to silence a sparse warning. From Wei Yongjun. 2) Remove a unused esph pointer definition in esp_input(). From Haishuang Yan. 3) Allow the NIC driver to quietly refuse xfrm offload in case it does not support it, the SA is created without offload in this case. From Shannon Nelson. Please pull or let me know if there are problems. ==================== Signed-off-by:
-
- 01 Oct, 2018 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxDavid S. Miller authored
Saeed Mahameed says: ==================== mlx5e-updates-2018-10-01 This series includes updates to mlx5e ethernet netdevice driver: From Or Gerlitz: 1) Support masks for l3/l4 filters in ethtool flow steering 2) Report checksum unnecessary also when the L3 checksum flag on the cqe is set and there's no L4 header 3) Allow reporting of checksum unnecessary, using an ethtool private flag. From Gavi Teitz and Or, VF representors netdevs performance improvements 4) Allow striding RQ in VF representor and bigger RQ size, ~3X performance improvement 5) Enable stateless offloads for VF representor, csum and TSO, 1.5X performance improvement 6) RSS Support for VF representors 6.1) Allow flow table destination fir VF representor steering rule. 6.2) Create RSS flow table per representor netdev 6.3) Expose mlx5e RSS ethtool to be used by representor netdevs 6.4) Enable multi-queue and RSS for VF representors, using mlx5e existing infrastructure for managing a multi-queue RX RSS tables. From Alaa Hleihel: 7) Cache the system image guid, The system image guid is a read-only field Read this once and save it on the core device. ==================== Signed-off-by:
-
