- 05 Mar, 2019 2 commits
-
-
Dou Liyang authored
[ Upstream commit 76f99ae5 ] Linux spreads out the non managed interrupt across the possible target CPUs to avoid vector space exhaustion. Managed interrupts are treated differently, as for them the vectors are reserved (with guarantee) when the interrupt descriptors are initialized. When the interrupt is requested a real vector is assigned. The assignment logic uses the first CPU in the affinity mask for assignment. If the interrupt has more than one CPU in the affinity mask, which happens when a multi queue device has less queues than CPUs, then doing the same search as for non managed interrupts makes sense as it puts the interrupt on the least interrupt plagued CPU. For single CPU affine vectors that's obviously a NOOP. Restructre the matrix allocation code so it does the 'best CPU' search, add the sanity check for an empty affinity mask and adapt the call site in the x86 vector management code. [ tglx: Added the empty mask check to the core and improved change log ] Signed-off-by:
Dou Liyang <douly.fnst@cn.fujitsu.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: hpa@zytor.com Link: https://lkml.kernel.org/r/20180908175838.14450-2-dou_liyang@163.comSigned-off-by:
Sasha Levin <sashal@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dou Liyang authored
[ Upstream commit 8ffe4e61 ] Linux finds the CPU which has the lowest vector allocation count to spread out the non managed interrupts across the possible target CPUs, but does not do so for managed interrupts. Split out the CPU selection code into a helper function for reuse. No functional change. Signed-off-by:
-
- 27 Feb, 2019 38 commits
-
-
Greg Kroah-Hartman authored
-
Russell King authored
commit 87454b6e upstream. During testing on Armada 388 platforms, it was found with a certain module configuration that it was possible to trigger a kernel oops during the module load process, caused by the phylink resolver being triggered for a currently disabled interface. This problem was introduced by changing the way the SFP registration works, which now can result in the sfp link down notification being called during phylink_create(). Fixes: b5bfc21a ("net: sfp: do not probe SFP module before we're attached") Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
David S. Miller <davem@davemloft.net> Cc: Sasha Levin <sashal@kernel.org> Signed-off-by:
-
Nathan Chancellor authored
commit 1f60652d upstream. Clang warns when one enumerated type is implicitly converted to another: drivers/pinctrl/pinctrl-max77620.c:56:12: warning: implicit conversion from enumeration type 'enum max77620_pinconf_param' to different enumeration type 'enum pin_config_param' [-Wenum-conversion] .param = MAX77620_ACTIVE_FPS_SOURCE, ^~~~~~~~~~~~~~~~~~~~~~~~~~ It is expected that pinctrl drivers can extend pin_config_param because of the gap between PIN_CONFIG_END and PIN_CONFIG_MAX so this conversion isn't an issue. Most drivers that take advantage of this define the PIN_CONFIG variables as constants, rather than enumerated values. Do the same thing here so that Clang no longer warns. Link: https://github.com/ClangBuiltLinux/linux/issues/139Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Mikulas Patocka authored
commit 68a958a9 upstream. The udlfb driver maintained an open count and cleaned up itself when the count reached zero. But the console is also counted in the reference count - so, if the user unplugged the device, the open count would not drop to zero and the driver stayed loaded with console attached. If the user re-plugged the adapter, it would create a device /dev/fb1, show green screen and the access to the console would be lost. The framebuffer subsystem has reference counting on its own - in order to fix the unplug bug, we rely the framebuffer reference counting. When the user unplugs the adapter, we call unregister_framebuffer unconditionally. unregister_framebuffer will unbind the console, wait until all users stop using the framebuffer and then call the fb_destroy method. The fb_destroy cleans up the USB driver. This patch makes the following changes: * Drop dlfb->kref and rely on implicit framebuffer reference counting instead. * dlfb_usb_disconnect calls unregister_framebuffer, the rest of driver cleanup is done in the function dlfb_ops_destroy. dlfb_ops_destroy will be called by the framebuffer subsystem when no processes have the framebuffer open or mapped. * We don't use workqueue during initialization, but initialize directly from dlfb_usb_probe. The workqueue could race with dlfb_usb_disconnect and this racing would produce various kinds of memory corruption. * We use usb_get_dev and usb_put_dev to make sure that the USB subsystem doesn't free the device under us. Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> cc: Dave Airlie <airlied@redhat.com> Cc: Bernie Thompson <bernie@plugable.com>, Cc: Ladislav Michl <ladis@linux-mips.org> Signed-off-by:
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by:
-
Taehee Yoo authored
commit 2a61d8b8 upstream. A proc_remove() can sleep. so that it can't be inside of spin_lock. Hence proc_remove() is moved to outside of spin_lock. and it also adds mutex to sync create and remove of proc entry(config->pde). test commands: SHELL#1 %while :; do iptables -A INPUT -p udp -i enp2s0 -d 192.168.1.100 \ --dport 9000 -j CLUSTERIP --new --hashmode sourceip \ --clustermac 01:00:5e:00:00:21 --total-nodes 3 --local-node 3; \ iptables -F; done SHELL#2 %while :; do echo +1 > /proc/net/ipt_CLUSTERIP/192.168.1.100; \ echo -1 > /proc/net/ipt_CLUSTERIP/192.168.1.100; done [ 2949.569864] BUG: sleeping function called from invalid context at kernel/sched/completion.c:99 [ 2949.579944] in_atomic(): 1, irqs_disabled(): 0, pid: 5472, name: iptables [ 2949.587920] 1 lock held by iptables/5472: [ 2949.592711] #0: 000000008f0ebcf2 (&(&cn->lock)->rlock){+...}, at: refcount_dec_and_lock+0x24/0x50 [ 2949.603307] CPU: 1 PID: 5472 Comm: iptables Tainted: G W 4.19.0-rc5+ #16 [ 2949.604212] Hardware name: To be filled by O.E.M. To be filled by O.E.M./Aptio CRB, BIOS 5.6.5 07/08/2015 [ 2949.604212] Call Trace: [ 2949.604212] dump_stack+0xc9/0x16b [ 2949.604212] ? show_regs_print_info+0x5/0x5 [ 2949.604212] ___might_sleep+0x2eb/0x420 [ 2949.604212] ? set_rq_offline.part.87+0x140/0x140 [ 2949.604212] ? _rcu_barrier_trace+0x400/0x400 [ 2949.604212] wait_for_completion+0x94/0x710 [ 2949.604212] ? wait_for_completion_interruptible+0x780/0x780 [ 2949.604212] ? __kernel_text_address+0xe/0x30 [ 2949.604212] ? __lockdep_init_map+0x10e/0x5c0 [ 2949.604212] ? __lockdep_init_map+0x10e/0x5c0 [ 2949.604212] ? __init_waitqueue_head+0x86/0x130 [ 2949.604212] ? init_wait_entry+0x1a0/0x1a0 [ 2949.604212] proc_entry_rundown+0x208/0x270 [ 2949.604212] ? proc_reg_get_unmapped_area+0x370/0x370 [ 2949.604212] ? __lock_acquire+0x4500/0x4500 [ 2949.604212] ? complete+0x18/0x70 [ 2949.604212] remove_proc_subtree+0x143/0x2a0 [ 2949.708655] ? remove_proc_entry+0x390/0x390 [ 2949.708655] clusterip_tg_destroy+0x27a/0x630 [ipt_CLUSTERIP] [ ... ] Fixes: b3e456fc ("netfilter: ipt_CLUSTERIP: fix a race condition of proc file creation") Signed-off-by:
Taehee Yoo <ap420073@gmail.com> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Fernando Fernandez Mancera authored
commit 1a6a0951 upstream. When we check the tcp options of a packet and it doesn't match the current fingerprint, the tcp packet option pointer must be restored to its initial value in order to do the proper tcp options check for the next fingerprint. Here we can see an example. Assumming the following fingerprint base with two lines: S10:64:1:60:M*,S,T,N,W6: Linux:3.0::Linux 3.0 S20:64:1:60:M*,S,T,N,W7: Linux:4.19:arch:Linux 4.1 Where TCP options are the last field in the OS signature, all of them overlap except by the last one, ie. 'W6' versus 'W7'. In case a packet for Linux 4.19 kicks in, the osf finds no matching because the TCP options pointer is updated after checking for the TCP options in the first line. Therefore, reset pointer back to where it should be. Fixes: 11eeef41 ("netfilter: passive OS fingerprint xtables match") Signed-off-by:
Fernando Fernandez Mancera <ffmancera@riseup.net> Signed-off-by:
-
Eli Cooper authored
commit 15df03c6 upstream. Commit 508b0904 ("netfilter: ipv6: Preserve link scope traffic original oif") made ip6_route_me_harder() keep the original oif for link-local and multicast packets. However, it also affected packets for the loopback address because it used rt6_need_strict(). REDIRECT rules in the OUTPUT chain rewrite the destination to loopback address; thus its oif should not be preserved. This commit fixes the bug that redirected local packets are being dropped. Actually the packet was not exactly dropped; Instead it was sent out to the original oif rather than lo. When a packet with daddr ::1 is sent to the router, it is effectively dropped. Fixes: 508b0904 ("netfilter: ipv6: Preserve link scope traffic original oif") Signed-off-by:
Eli Cooper <elicooper@gmx.com> Signed-off-by:
-
Pablo Neira Ayuso authored
commit 753c111f upstream. Fetch pointer to module before target object is released. Fixes: 29e38801 ("netfilter: nf_tables: fix use-after-free when deleting compat expressions") Fixes: 0ca743a5 ("netfilter: nf_tables: add compatibility layer for x_tables") Signed-off-by:
-
Pablo Neira Ayuso authored
commit 23b7ca4f upstream. Flush after rule deletion bogusly hits -ENOENT. Skip rules that have been already from nft_delrule_by_chain() which is always called from the flush path. Fixes: cf9dc09d ("netfilter: nf_tables: fix missing rules flushing per table") Reported-by:
Phil Sutter <phil@nwl.cc> Acked-by:
-
Hangbin Liu authored
commit 278e2148 upstream. This reverts commit 5a2de63f ("bridge: do not add port to router list when receives query with source 0.0.0.0") and commit 0fe5119e ("net: bridge: remove ipv6 zero address check in mcast queries") The reason is RFC 4541 is not a standard but suggestive. Currently we will elect 0.0.0.0 as Querier if there is no ip address configured on bridge. If we do not add the port which recives query with source 0.0.0.0 to router list, the IGMP reports will not be about to forward to Querier, IGMP data will also not be able to forward to dest. As Nikolay suggested, revert this change first and add a boolopt api to disable none-zero election in future if needed. Reported-by:
Linus Lüssing <linus.luessing@c0d3.blue> Reported-by:
Sebastian Gottschall <s.gottschall@newmedia-net.de> Fixes: 5a2de63f ("bridge: do not add port to router list when receives query with source 0.0.0.0") Fixes: 0fe5119e ("net: bridge: remove ipv6 zero address check in mcast queries") Signed-off-by:
Hangbin Liu <liuhangbin@gmail.com> Acked-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
-
Gao Xiang authored
commit b8e076a6 upstream. remove all redundant BUG_ONs, and turn the rest useful usages to DBG_BUGONs. Signed-off-by:
Gao Xiang <gaoxiang25@huawei.com> Reviewed-by:
Chao Yu <yuchao0@huawei.com> Signed-off-by:
-
Gao Xiang authored
commit 70b17991 upstream. remove all redundant BUG_ONs, and turn the rest useful usages to DBG_BUGONs. Signed-off-by:
-
Gao Xiang authored
commit 8b987bca upstream. remove all redundant BUG_ONs, and turn the rest useful usages to DBG_BUGONs. Signed-off-by:
-
Gao Xiang authored
commit 948bbdb1 upstream. Just like other generic locks, insert a full barrier in case of memory reorder. Reviewed-by:
-
Gao Xiang authored
commit 73f5c66d upstream. There are two minor issues in the current freeze interface: 1) Freeze interfaces have not related with CONFIG_DEBUG_SPINLOCK, therefore fix the incorrect conditions; 2) For SMP platforms, it should also disable preemption before doing atomic_cmpxchg in case that some high priority tasks preempt between atomic_cmpxchg and disable_preempt, then spin on the locked refcount later. Reviewed-by:
-
Gao Xiang authored
commit df134b8d upstream. It's better to use atomic_cond_read_relaxed, which is implemented in hardware instructions to monitor a variable changes currently for ARM64, instead of open-coded busy waiting. Reviewed-by:
-
Gao Xiang authored
commit e9c89246 upstream. There is actually no need at all to d_rehash() for the root dentry as Al pointed out, fix it. Reported-by:
Al Viro <viro@ZenIV.linux.org.uk> Cc: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by:
-
Gao Xiang authored
commit e5e3abba upstream. Multiref support means that a compressed page could have more than one reference, which is designed for on-disk data deduplication. However, mkfs doesn't support this mode at this moment, and the kernel implementation is also broken. Let's drop multiref support. If it is fully implemented in the future, it can be reverted later. Signed-off-by:
-
Chen Gong authored
commit 9141b60c upstream. This patch replace BUG_ON with DBG_BUGON in data.c, and add necessary error handler. Signed-off-by:
Chen Gong <gongchen4@huawei.com> Reviewed-by:
-
Gao Xiang authored
commit 1e05ff36 upstream. This patch completes error handing code of z_erofs_do_read_page. PG_error will be set when some read error happens, therefore z_erofs_onlinepage_endio will unlock this page without setting PG_uptodate. Reviewed-by:
Chao Yu <yucxhao0@huawei.com> Signed-off-by:
-
Gao Xiang authored
commit 0734ffbf upstream. As described in Kconfig, the last compressed pack should be cached for further reading for either `EROFS_FS_ZIP_CACHE_UNIPOLAR' or `EROFS_FS_ZIP_CACHE_BIPOLAR' by design. However, there is a bug in z_erofs_do_read_page, it will switch `initial' to `false' at the very beginning before it decides to cache the last compressed pack. caching strategy should work properly after appling this patch. Reviewed-by:
-
Willem de Bruijn authored
commit 9e8db591 upstream. GSO packets with vnet_hdr must conform to a small set of gso_types. The below commit uses flow dissection to drop packets that do not. But it has false positives when the skb is not fully initialized. Dissection needs skb->protocol and skb->network_header. Infer skb->protocol from gso_type as the two must agree. SKB_GSO_UDP can use both ipv4 and ipv6, so try both. Exclude callers for which network header offset is not known. Fixes: d5be7f63 ("net: validate untrusted gso packets without csum offload") Signed-off-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
-
Willem de Bruijn authored
commit d5be7f63 upstream. Syzkaller again found a path to a kernel crash through bad gso input. By building an excessively large packet to cause an skb field to wrap. If VIRTIO_NET_HDR_F_NEEDS_CSUM was set this would have been dropped in skb_partial_csum_set. GSO packets that do not set checksum offload are suspicious and rare. Most callers of virtio_net_hdr_to_skb already pass them to skb_probe_transport_header. Move that test forward, change it to detect parse failure and drop packets on failure as those cleary are not one of the legitimate VIRTIO_NET_HDR_GSO types. Fixes: bfd5f4a3 ("packet: Add GSO/csum offload support.") Fixes: f43798c2 ("tun: Allow GSO using virtio_net_hdr") Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Yu Zhang authored
commit 511da98d upstream. Previously, 'commit 372fddf7 ("x86/mm: Introduce the 'no5lvl' kernel parameter")' cleared X86_FEATURE_LA57 in boot_cpu_data, if Linux chooses to not run in 5-level paging mode. Yet boot_cpu_data is queried by do_cpuid_ent() as the host capability later when creating vcpus, and Qemu will not be able to detect this feature and create VMs with LA57 feature. As discussed earlier, VMs can still benefit from extended linear address width, e.g. to enhance features like ASLR. So we would like to fix this, by return the true hardware capability when Qemu queries. Signed-off-by:
Yu Zhang <yu.c.zhang@linux.intel.com> Cc: stable@vger.kernel.org Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Felix Fietkau authored
commit 51d0af22 upstream. Forwarded packets enter the tx path through ieee80211_add_pending_skb, which skips the ieee80211_skb_resize call. Fixes WARN_ON in ccmp_encrypt_skb and resulting packet loss. Cc: stable@vger.kernel.org Signed-off-by:
Felix Fietkau <nbd@nbd.name> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Leo (Hanghong) Ma authored
commit d2f0b53b upstream. [Why] drm_dp_mst_topology_mgr_suspend() is added into the new reboot sequence, which disables the UP request at the beginning. Therefore sideband messages are blocked. [How] Finish MST sideband message transaction before UP request is suppressed. Signed-off-by:
Leo (Hanghong) Ma <hanghong.ma@amd.com> Reviewed-by:
Roman Li <Roman.Li@amd.com> Acked-by:
Leo Li <sunpeng.li@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Chris Wilson authored
commit d179b88d upstream. If we skipped all the connectors that were not part of a tile, we would leave conn_seq=0 and conn_configured=0, convincing ourselves that we had stagnated in our configuration attempts. Avoid this situation by starting conn_seq=ALL_CONNECTORS, and repeating until we find no more connectors to configure. Fixes: 754a7659 ("drm/i915/fbdev: Stop repeating tile configuration on stagnation") Reported-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Rafael J. Wysocki authored
commit 450d007d upstream. On HP ProBook 4540s, if PM-runtime is enabled in the radeon driver and the direct-complete optimization is used for the radeon device during system-wide suspend, the system doesn't resume. Preventing direct-complete from being used with the radeon device by setting the DPM_FLAG_NEVER_SKIP driver flag for it makes the problem go away, which indicates that direct-complete is not safe for the radeon driver in general and should not be used with it (at least for now). This fixes a regression introduced by commit c62ec461 ("PM / core: Fix direct_complete handling for devices with no callbacks") which allowed direct-complete to be applied to devices without PM callbacks (again) which in turn unlocked direct-complete for radeon on HP ProBook 4540s. Fixes: c62ec461 ("PM / core: Fix direct_complete handling for devices with no callbacks") Link: https://bugzilla.kernel.org/show_bug.cgi?id=201519Reported-by:
Ярослав Семченко <ukrkyi@gmail.com> Tested-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Alex Deucher authored
commit d3315853 upstream. Based on a similar patch from Rafael for radeon. When using ATPX to control dGPU power, the state is not retained across suspend and resume cycles by default. This can probably be loosened for Hybrid Graphics (_PR3) laptops where I think the state is properly retained. Fixes: c62ec461 ("PM / core: Fix direct_complete handling for devices with no callbacks") Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by:
-
Alexey Brodkin authored
commit b6835ea7 upstream. The default value of ARCH_SLAB_MINALIGN in "include/linux/slab.h" is "__alignof__(unsigned long long)" which for ARC unexpectedly turns out to be 4. This is not a compiler bug, but as defined by ARC ABI [1] Thus slab allocator would allocate a struct which is 32-bit aligned, which is generally OK even if struct has long long members. There was however potetial problem when it had any atomic64_t which use LLOCKD/SCONDD instructions which are required by ISA to take 64-bit addresses. This is the problem we ran into [ 4.015732] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) [ 4.167881] Misaligned Access [ 4.172356] Path: /bin/busybox.nosuid [ 4.176004] CPU: 2 PID: 171 Comm: rm Not tainted 4.19.14-yocto-standard #1 [ 4.182851] [ 4.182851] [ECR ]: 0x000d0000 => Check Programmer's Manual [ 4.190061] [EFA ]: 0xbeaec3fc [ 4.190061] [BLINK ]: ext4_delete_entry+0x210/0x234 [ 4.190061] [ERET ]: ext4_delete_entry+0x13e/0x234 [ 4.202985] [STAT32]: 0x80080002 : IE K [ 4.207236] BTA: 0x9009329c SP: 0xbe5b1ec4 FP: 0x00000000 [ 4.212790] LPS: 0x9074b118 LPE: 0x9074b120 LPC: 0x00000000 [ 4.218348] r00: 0x00000040 r01: 0x00000021 r02: 0x00000001 ... ... [ 4.270510] Stack Trace: [ 4.274510] ext4_delete_entry+0x13e/0x234 [ 4.278695] ext4_rmdir+0xe0/0x238 [ 4.282187] vfs_rmdir+0x50/0xf0 [ 4.285492] do_rmdir+0x9e/0x154 [ 4.288802] EV_Trap+0x110/0x114 The fix is to make sure slab allocations are 64-bit aligned. Do note that atomic64_t is __attribute__((aligned(8)) which means gcc does generate 64-bit aligned references, relative to beginning of container struct. However the issue is if the container itself is not 64-bit aligned, atomic64_t ends up unaligned which is what this patch ensures. [1] https://github.com/foss-for-synopsys-dwc-arc-processors/toolchain/wiki/files/ARCv2_ABI.pdfSigned-off-by:
Alexey Brodkin <abrodkin@synopsys.com> Cc: <stable@vger.kernel.org> # 4.8+ Signed-off-by:
Vineet Gupta <vgupta@synopsys.com> [vgupta: reworked changelog, added dependency on LL64+LLSC] Signed-off-by:
-
Eugeniy Paltsev authored
commit a66f2e57 upstream. Handle U-boot arguments paranoidly: * don't allow to pass unknown tag. * try to use external device tree blob only if corresponding tag (TAG_DTB) is set. * don't check uboot_tag if kernel build with no ARC_UBOOT_SUPPORT. NOTE: If U-boot args are invalid we skip them and try to use embedded device tree blob. We can't panic on invalid U-boot args as we really pass invalid args due to bug in U-boot code. This happens if we don't provide external DTB to U-boot and don't set 'bootargs' U-boot environment variable (which is default case at least for HSDK board) In that case we will pass {r0 = 1 (bootargs in r2); r1 = 0; r2 = 0;} to linux which is invalid. While I'm at it refactor U-boot arguments handling code. Cc: stable@vger.kernel.org Tested-by:
Corentin LABBE <clabbe@baylibre.com> Signed-off-by:
Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by:
-
Eugeniy Paltsev authored
commit 252f6e8e upstream. It is currently done in arc_init_IRQ() which might be too late considering gcc 7.3.1 onwards (GNU 2018.03) generates unaligned memory accesses by default Cc: stable@vger.kernel.org #4.4+ Signed-off-by:
-
Dmitry V. Levin authored
commit b7dc5a07 upstream. Commit 910cd32e ("parisc: Fix and enable seccomp filter support") introduced a regression in ptrace-based syscall tampering: when tracer changes syscall number to -1, the kernel fails to initialize %r28 with -ENOSYS and subsequently fails to return the error code of the failed syscall to userspace. This erroneous behaviour could be observed with a simple strace syscall fault injection command which is expected to print something like this: $ strace -a0 -ewrite -einject=write:error=enospc echo hello write(1, "hello\n", 6) = -1 ENOSPC (No space left on device) (INJECTED) write(2, "echo: ", 6) = -1 ENOSPC (No space left on device) (INJECTED) write(2, "write error", 11) = -1 ENOSPC (No space left on device) (INJECTED) write(2, "\n", 1) = -1 ENOSPC (No space left on device) (INJECTED) +++ exited with 1 +++ After commit 910cd32e it loops printing something like this instead: write(1, "hello\n", 6../strace: Failed to tamper with process 12345: unexpectedly got no error (return value 0, error 0) ) = 0 (INJECTED) This bug was found by strace test suite. Fixes: 910cd32e ("parisc: Fix and enable seccomp filter support") Cc: stable@vger.kernel.org # v4.5+ Signed-off-by:
Dmitry V. Levin <ldv@altlinux.org> Tested-by:
Helge Deller <deller@gmx.de> Signed-off-by:
-
Eric Biggers authored
commit ede0fa98 upstream. syzbot hit the 'BUG_ON(index_key->desc_len == 0);' in __key_link_begin() called from construct_alloc_key() during sys_request_key(), because the length of the key description was never calculated. The problem is that we rely on ->desc_len being initialized by search_process_keyrings(), specifically by search_nested_keyrings(). But, if the process isn't subscribed to any keyrings that never happens. Fix it by always initializing keyring_index_key::desc_len as soon as the description is set, like we already do in some places. The following program reproduces the BUG_ON() when it's run as root and no session keyring has been installed. If it doesn't work, try removing pam_keyinit.so from /etc/pam.d/login and rebooting. #include <stdlib.h> #include <unistd.h> #include <keyutils.h> int main(void) { int id = add_key("keyring", "syz", NULL, 0, KEY_SPEC_USER_KEYRING); keyctl_setperm(id, KEY_OTH_WRITE); setreuid(5000, 5000); request_key("user", "desc", "", id); } Reported-by: syzbot+ec24e95ea483de0a24da@syzkaller.appspotmail.com Fixes: b2a4df20 ("KEYS: Expand the capacity of a keyring") Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
David Howells <dhowells@redhat.com> Cc: stable@vger.kernel.org Signed-off-by:
James Morris <james.morris@microsoft.com> Signed-off-by:
-
Eric Biggers authored
commit cc1780fc upstream. Align the payload of "user" and "logon" keys so that users of the keyrings service can access it as a struct that requires more than 2-byte alignment. fscrypt currently does this which results in the read of fscrypt_key::size being misaligned as it needs 4-byte alignment. Align to __alignof__(u64) rather than __alignof__(long) since in the future it's conceivable that people would use structs beginning with u64, which on some platforms would require more than 'long' alignment. Reported-by:
Aaro Koskinen <aaro.koskinen@iki.fi> Fixes: 2aa349f6 ("[PATCH] Keys: Export user-defined keyring operations") Fixes: 88bd6ccd ("ext4 crypto: add encryption key management facilities") Cc: stable@vger.kernel.org Signed-off-by:
-
Bart Van Assche authored
commit 48396e80 upstream. Since .scsi_done() must only be called after scsi_queue_rq() has finished, make sure that the SRP initiator driver does not call .scsi_done() while scsi_queue_rq() is in progress. Although invoking sg_reset -d while I/O is in progress works fine with kernel v4.20 and before, that is not the case with kernel v5.0-rc1. This patch avoids that the following crash is triggered with kernel v5.0-rc1: BUG: unable to handle kernel NULL pointer dereference at 0000000000000138 CPU: 0 PID: 360 Comm: kworker/0:1H Tainted: G B 5.0.0-rc1-dbg+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014 Workqueue: kblockd blk_mq_run_work_fn RIP: 0010:blk_mq_dispatch_rq_list+0x116/0xb10 Call Trace: blk_mq_sched_dispatch_requests+0x2f7/0x300 __blk_mq_run_hw_queue+0xd6/0x180 blk_mq_run_work_fn+0x27/0x30 process_one_work+0x4f1/0xa20 worker_thread+0x67/0x5b0 kthread+0x1cf/0x1f0 ret_from_fork+0x24/0x30 Cc: <stable@vger.kernel.org> Fixes: 94a9174c ("IB/srp: reduce lock coverage of command completion") Signed-off-by:
Bart Van Assche <bvanassche@acm.org> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
Saeed Mahameed authored
[ Upstream commit 407e17b1 ] Currently mlx5 driver creates xdp redirect hw queues unconditionally on netdevice open, This is great until someone starts redirecting XDP traffic via ndo_xdp_xmit on mlx5 device and changes the device configuration at the same time, this might cause crashes, since the other device's napi is not aware of the mlx5 state change (resources un-availability). To fix this we must synchronize with other devices napi's on the system. Added a new flag under mlx5e_priv to determine XDP TX resources are available, set/clear it up when necessary and use synchronize_rcu() when the flag is turned off, so other napi's are in-sync with it, before we actually cleanup the hw resources. The flag is tested prior to committing to transmit on mlx5e_xdp_xmit, and it is sufficient to determine if it safe to transmit or not. The other two internal flags (MLX5E_STATE_OPENED and MLX5E_SQ_STATE_ENABLED) become unnecessary. Thus, they are removed from data path. Fixes: 58b99ee3 ("net/mlx5e: Add support for XDP_REDIRECT in device-out side") Reported-by:
Toke Høiland-Jørgensen <toke@redhat.com> Reviewed-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
-
Cong Wang authored
[ Upstream commit 1db817e7 ] struct tcindex_filter_result contains two parts: struct tcf_exts and struct tcf_result. For the local variable 'cr', its exts part is never used but initialized without being released properly on success path. So just completely remove the exts part to fix this leak. For the local variable 'new_filter_result', it is never properly released if not used by 'r' on success path. Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
