- 05 Nov, 2023 11 commits
-
-
Nam Cao authored
Instructions can write to x0, so we should simulate these instructions normally. Currently, the kernel hangs if an instruction who writes to x0 is simulated. Fixes: c22b0bcb ("riscv: Add kprobes supported") Cc: stable@vger.kernel.org Signed-off-by:
Nam Cao <namcaov@gmail.com> Reviewed-by:
Charlie Jenkins <charlie@rivosinc.com> Acked-by:
Guo Ren <guoren@kernel.org> Link: https://lore.kernel.org/r/20230829182500.61875-1-namcaov@gmail.comSigned-off-by:
Palmer Dabbelt <palmer@rivosinc.com>
-
Nam Cao authored
uprobes expects is_trap_insn() to return true for any trap instructions, not just the one used for installing uprobe. The current default implementation only returns true for 16-bit c.ebreak if C extension is enabled. This can confuse uprobes if a 32-bit ebreak generates a trap exception from userspace: uprobes asks is_trap_insn() who says there is no trap, so uprobes assume a probe was there before but has been removed, and return to the trap instruction. This causes an infinite loop of entering and exiting trap handler. Instead of using the default implementation, implement this function speficially for riscv with checks for both ebreak and c.ebreak. Fixes: 74784081 ("riscv: Add uprobes supported") Signed-off-by:
Björn Töpel <bjorn@rivosinc.com> Reviewed-by:
-
Palmer Dabbelt authored
Yu Chien Peter Lin <peterlin@andestech.com> says: This patchset enhances PTDUMP by providing additional information from pagetable entries. The first patch fixes the RSW field, while the second and third patches introduce the PBMT and NAPOT fields, respectively, for RV64 systems. * b4-shazam-merge: riscv: Introduce NAPOT field to PTDUMP riscv: Introduce PBMT field to PTDUMP riscv: Improve PTDUMP to show RSW with non-zero value Link: https://lore.kernel.org/r/20230921025022.3989723-1-peterlin@andestech.comSigned-off-by:
-
Yu Chien Peter Lin authored
This patch introduces the NAPOT field to PTDUMP, allowing it to display the letter "N" for pages that have the 63rd bit set. Signed-off-by:
Yu Chien Peter Lin <peterlin@andestech.com> Reviewed-by:
Alexandre Ghiti <alexghiti@rivosinc.com> Tested-by:
-
Yu Chien Peter Lin authored
This patch introduces the PBMT field to the PTDUMP, so it can display the memory attributes for NC or IO. Signed-off-by:
-
Yu Chien Peter Lin authored
RSW field can be used to encode 2 bits of software defined information. Currently, PTDUMP only prints "RSW" when its value is 1 or 3. To fix this issue and improve the debugging experience with PTDUMP, we redefine _PAGE_SPECIAL to its original value and use _PAGE_SOFT as the RSW mask, allow it to print the RSW with any non-zero value. This patch also removes the val from the struct prot_bits as it is no longer needed. Signed-off-by:
-
Conor Dooley authored
The CMO op macros initially used lower case, as the original iteration of the ALT_CMO_OP alternative stringified the first parameter to finalise the assembly for the standard variant. As a knock-on, the T-Head versions of these CMOs had to use mixed case defines. Commit dd23e953 ("RISC-V: replace cbom instructions with an insn-def") removed the asm construction with stringify, replacing it an insn-def macro, rending the lower-case surplus to requirements. As far as I can tell from a brief check, CBO_zero does not see similar use and didn't require the mixed case define in the first place. Replace the lower case characters now for consistency with other insn-def macros in the standard and T-Head forms, and adjust the callsites. Suggested-by:
Andrew Jones <ajones@ventanamicro.com> Signed-off-by:
Conor Dooley <conor.dooley@microchip.com> Reviewed-by:
-
Jisheng Zhang authored
If misaligned_access_speed percpu var isn't so called "HWPROBE MISALIGNED UNKNOWN", it means the probe has happened(this is possible for example, hotplug off then hotplug on one cpu), and the percpu var has been set, don't probe again in this case. Signed-off-by:
Jisheng Zhang <jszhang@kernel.org> Fixes: 584ea656 ("RISC-V: Probe for unaligned access speed") Reviewed-by:
-
Jinyu Tang authored
If these config not set, mmc can't run for jh7110, rootfs can't be found when using SD card. So set CONFIG_MMC_DW=y like arm64 defconfig, and set CONFIG_MMC_DW_STARFIVE=y for starfive. Then starfive vf2 board can start SD card rootfs with mainline defconfig and dtb. Signed-off-by:
Jinyu Tang <tangjinyu@tinylab.org> Reviewed-by:
-
Haorong Lu authored
In the current riscv implementation, blocking syscalls like read() may not correctly restart after being interrupted by ptrace. This problem arises when the syscall restart process in arch_do_signal_or_restart() is bypassed due to changes to the regs->cause register, such as an ebreak instruction. Steps to reproduce: 1. Interrupt the tracee process with PTRACE_SEIZE & PTRACE_INTERRUPT. 2. Backup original registers and instruction at new_pc. 3. Change pc to new_pc, and inject an instruction (like ebreak) to this address. 4. Resume with PTRACE_CONT and wait for the process to stop again after executing ebreak. 5. Restore original registers and instructions, and detach from the tracee process. 6. Now the read() syscall in tracee will return -1 with errno set to ERESTARTSYS. Specifically, during an interrupt, the regs->cause changes from EXC_SYSCALL to EXC_BREAKPOINT due to the injected ebreak, which is inaccessible via ptrace so we cannot restore it. This alteration breaks the syscall restart condition and ends the read() syscall with an ERESTARTSYS error. According to include/linux/errno.h, it should never be seen by user programs. X86 can avoid this issue as it checks the syscall condition using a register (orig_ax) exposed to user space. Arm64 handles syscall restart before calling get_signal, where it could be paused and inspected by ptrace/debugger. This patch adjusts the riscv implementation to arm64 style, which also checks syscall using a kernel register (syscallno). It ensures the syscall restart process is not bypassed when changes to the cause register occur, providing more consistent behavior across various architectures. For a simplified reproduction program, feel free to visit: https://github.com/ancientmodern/riscv-ptrace-bug-demo. Signed-off-by:
Haorong Lu <ancientmodern4@gmail.com> Link: https://lore.kernel.org/r/20230803224458.4156006-1-ancientmodern4@gmail.comSigned-off-by:
-
Palmer Dabbelt authored
Clément Léger <cleger@rivosinc.com> says: Since commit 61cadb9 ("Provide new description of misaligned load/store behavior compatible with privileged architecture.") in the RISC-V ISA manual, it is stated that misaligned load/store might not be supported. However, the RISC-V kernel uABI describes that misaligned accesses are supported. In order to support that, this series adds support for S-mode handling of misaligned accesses as well support for prctl(PR_UNALIGN). Handling misaligned access in kernel allows for a finer grain control of the misaligned accesses behavior, and thanks to the prctl() call, can allow disabling misaligned access emulation to generate SIGBUS. User space can then optimize its software by removing such access based on SIGBUS generation. This series is useful when using a SBI implementation that does not handle misaligned traps as well as detecting misaligned accesses generated by userspace application using the prctrl(PR_SET_UNALIGN) feature. This series can be tested using the spike simulator[1] and a modified openSBI version[2] which allows to always delegate misaligned load/store to S-mode. A test[3] that exercise various instructions/registers can be executed to verify the unaligned access support. [1] https://github.com/riscv-software-src/riscv-isa-sim [2] https://github.com/rivosinc/opensbi/tree/dev/cleger/no_misaligned [3] https://github.com/clementleger/unaligned_test * b4-shazam-merge: riscv: add support for PR_SET_UNALIGN and PR_GET_UNALIGN riscv: report misaligned accesses emulation to hwprobe riscv: annotate check_unaligned_access_boot_cpu() with __init riscv: add support for sysctl unaligned_enabled control riscv: add floating point insn support to misaligned access emulation riscv: report perf event for misaligned fault riscv: add support for misaligned trap handling in S-mode riscv: remove unused functions in traps_misaligned.c Link: https://lore.kernel.org/r/20231004151405.521596-1-cleger@rivosinc.comSigned-off-by:
-
- 02 Nov, 2023 5 commits
-
-
Andrew Jones authored
A hwprobe pair key is signed, but the hwprobe vDSO function was only checking that the upper bound was valid. In order to help avoid this type of problem in the future, and in anticipation of this check becoming more complicated with sparse keys, introduce and use a "key is valid" predicate function for the check. Fixes: aa5af0aa ("RISC-V: Add hwprobe vDSO function and data") Signed-off-by:
Evan Green <evan@rivosinc.com> Link: https://lore.kernel.org/r/20231010165101.14942-2-ajones@ventanamicro.comSigned-off-by:
-
Lad Prabhakar authored
Enable the configs required by the below IP blocks which are present on RZ/Five SoC: * ADC * CANFD * DMAC * eMMC/SDHI * OSTM * RAVB (+ Micrel PHY) * RIIC * RSPI * SSI (Sound+WM8978 codec) * Thermal * USB (PHY/RESET/OTG) Along with the above some core configs are enabled too, -> CPU frequency scaling as RZ/Five does support this. -> MTD is enabled as RSPI can be connected to flash chips -> Enabled I2C chardev so that it enables userspace to read/write i2c devices (similar to arm64) -> Thermal configs as RZ/Five SoC does have thermal unit -> GPIO regulator as we might have IP blocks for which voltage levels are controlled by GPIOs -> OTG configs as RZ/Five USB can support host/function -> Gadget configs so that we can test USB function (as done in arm64 all the gadget configs are enabled) Signed-off-by:
Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Acked-by:
Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20230929000704.53217-6-prabhakar.mahadev-lad.rj@bp.renesas.comSigned-off-by:
-
Palmer Dabbelt authored
Sami Tolvanen <samitolvanen@google.com> says: This series adds Shadow Call Stack (SCS) support for RISC-V. SCS uses compiler instrumentation to store return addresses in a separate shadow stack to protect them against accidental or malicious overwrites. More information about SCS can be found here: https://clang.llvm.org/docs/ShadowCallStack.html Patch 1 is from Deepak, and it simplifies VMAP_STACK overflow handling by adding support for accessing per-CPU variables directly in assembly. The patch is included in this series to make IRQ stack switching cleaner with SCS, and I've simply rebased it and fixed a couple of minor issues. Patch 2 uses this functionality to clean up the stack switching by moving duplicate code into a single function. On RISC-V, the compiler uses the gp register for storing the current shadow call stack pointer, which is incompatible with global pointer relaxation. Patch 3 moves global pointer loading into a macro that can be easily disabled with SCS. Patch 4 implements SCS register loading and switching, and allows the feature to be enabled, and patch 5 adds separate per-CPU IRQ shadow call stacks when CONFIG_IRQ_STACKS is enabled. Patch 6 fixes the backward-edge CFI test in lkdtm for RISC-V. Note that this series requires Clang 17. Earlier Clang versions support SCS on RISC-V, but use the x18 register instead of gp, which isn't ideal. gcc has SCS support for arm64, but I'm not aware of plans to support RISC-V. Once the Zicfiss extension is ratified, it's probably preferable to use hardware-backed shadow stacks instead of SCS on hardware that supports the extension, and we may want to consider implementing CONFIG_DYNAMIC_SCS to patch between the implementation at runtime (similarly to the arm64 implementation, which switches to SCS when hardware PAC support isn't available). * b4-shazam-merge: lkdtm: Fix CFI_BACKWARD on RISC-V riscv: Use separate IRQ shadow call stacks riscv: Implement Shadow Call Stack riscv: Move global pointer loading to a macro riscv: Deduplicate IRQ stack switching riscv: VMAP_STACK overflow detection thread-safe Link: https://lore.kernel.org/r/20230927224757.1154247-8-samitolvanen@google.comSigned-off-by:
-
Palmer Dabbelt authored
This fixes an encoding issue with T-Head's dcache.cva and fixes the comment about the T-Head encodings. The first of these was a fix and got picked up earlier, I'm merging the second on top of it as they touch the same comment. * b4-shazam-merge: riscv: errata: prefix T-Head mnemonics with th. riscv: errata: fix T-Head dcache.cva encoding Link: https://lore.kernel.org/r/20230827090813.1353-1-jszhang@kernel.orgSigned-off-by:
-
Icenowy Zheng authored
T-Head now maintains some specification for their extended instructions at [1], in which all instructions are prefixed "th.". Follow this practice in the kernel comments. Link: https://github.com/T-head-Semi/thead-extension-spec [1] Signed-off-by:
Icenowy Zheng <uwu@icenowy.me> Reviewed-by:
-
- 01 Nov, 2023 20 commits
-
-
Clément Léger authored
Now that trap support is ready to handle misalignment errors in S-mode, allow the user to control the behavior of misaligned accesses using prctl(PR_SET_UNALIGN). Add an align_ctl flag in thread_struct which will be used to determine if we should SIGBUS the process or not on such fault. Signed-off-by:
Clément Léger <cleger@rivosinc.com> Reviewed-by:
-
Clément Léger authored
hwprobe provides a way to report if misaligned access are emulated. In order to correctly populate that feature, we can check if it actually traps when doing a misaligned access. This can be checked using an exception table entry which will actually be used when a misaligned access is done from kernel mode. Signed-off-by:
-
Clément Léger authored
This function is solely called as an initcall, thus annotate it with __init. Signed-off-by:
-
Clément Léger authored
This sysctl tuning option allows the user to disable misaligned access handling globally on the system. This will also be used by misaligned detection code to temporarily disable misaligned access handling. Signed-off-by:
-
Clément Léger authored
This support is partially based of openSBI misaligned emulation floating point instruction support. It provides support for the existing floating point instructions (both for 32/64 bits as well as compressed ones). Since floating point registers are not part of the pt_regs struct, we need to modify them directly using some assembly. We also dirty the pt_regs status in case we modify them to be sure context switch will save FP state. With this support, Linux is on par with openSBI support. Signed-off-by:
-
Clément Léger authored
Add missing calls to account for misaligned fault event using perf_sw_event(). Signed-off-by:
-
Clément Léger authored
Misalignment trap handling is only supported for M-mode and uses direct accesses to user memory. In S-mode, when handling usermode fault, this requires to use the get_user()/put_user() accessors. Implement load_u8(), store_u8() and get_insn() using these accessors for userspace and direct text access for kernel. Signed-off-by:
-
Clément Léger authored
Replace macros by the only two function calls that are done from this file, store_u8() and load_u8(). Signed-off-by:
-
Palmer Dabbelt authored
Sunil V L <sunilvl@ventanamicro.com> says: This series is a set of patches which were originally part of RFC v1 series [1] to add ACPI support in RISC-V interrupt controllers. Since these patches are independent of the interrupt controllers, creating this new series which helps to merge instead of waiting for big series. This set of patches primarily adds support below ECR [2] which is approved by the ASWG and adds below features. - Get CBO block sizes from RHCT on ACPI based systems. Additionally, the series contains a patch to improve acpi_os_ioremap(). [1] - https://lore.kernel.org/lkml/20230803175202.3173957-1-sunilvl@ventanamicro.com/ [2] - https://drive.google.com/file/d/1sKbOa8m1UZw1JkquZYe3F1zQBN1xXsaf/view?usp=sharing * b4-shazam-merge: RISC-V: cacheflush: Initialize CBO variables on ACPI systems RISC-V: ACPI: RHCT: Add function to get CBO block sizes RISC-V: ACPI: Update the return value of acpi_get_rhct() RISC-V: ACPI: Enhance acpi_os_ioremap with MMIO remapping Link: https://lore.kernel.org/r/20231018124007.1306159-1-sunilvl@ventanamicro.comSigned-off-by:
-
Nam Cao authored
The interrupt entries are expected to be in the .irqentry.text section. For example, for kprobes to work properly, exception code cannot be probed; this is ensured by blacklisting addresses in the .irqentry.text section. Fixes: 7db91e57 ("RISC-V: Task implementation") Signed-off-by:
-
Song Shuai authored
Since the commit 011f09d1 set sv57 as default for CONFIG_64BIT, the comment of CONFIG_PAGE_OFFSET should be updated too. Fixes: 011f09d1 ("riscv: mm: Set sv57 on defaultly") Signed-off-by:
Song Shuai <suagrfillet@gmail.com> Link: https://lore.kernel.org/r/20230809031023.3575407-1-songshuaishuai@tinylab.org Cc: stable@vger.kernel.org Signed-off-by:
-
Minda Chen authored
Actually it is a part of Conor's commit aae538cd ("riscv: fix detection of toolchain Zihintpause support"). It is looks like a merge issue. Samuel's commit 0b1d60d6 ("riscv: Fix build with CONFIG_CC_OPTIMIZE_FOR_SIZE=y") do not base on Conor's commit and revert to __riscv_zihintpause. So this patch can fix it. Signed-off-by:
Minda Chen <minda.chen@starfivetech.com> Fixes: 3c349eac ("Merge patch "riscv: Fix build with CONFIG_CC_OPTIMIZE_FOR_SIZE=y"") Reviewed-by:
-
Xiao Wang authored
Swap type takes bits 7-11 and swap offset should start from bit 12. Signed-off-by:
Xiao Wang <xiao.w.wang@intel.com> Reviewed-by:
David Hildenbrand <david@redhat.com> Link: https://lore.kernel.org/r/20230921141652.2657054-1-xiao.w.wang@intel.comSigned-off-by:
-
Tsukasa OI authored
Extensions prefixed with "Su" won't corrupt the workaround in many cases. The only exception is when the first multi-letter extension in the ISA string begins with "Su" and is not prefixed with an underscore. For instance, following ISA string can confuse this QEMU workaround. * "rv64imacsuclic" (RV64I + M + A + C + "Suclic") However, this case is very unlikely because extensions prefixed by either "Z", "Sm" or "Ss" will most likely precede first. For instance, the "Suclic" extension (draft as of now) will be placed after related "Smclic" and "Ssclic" extensions. It's also highly likely that other unprivileged extensions like "Zba" will precede. It's also possible to suppress the issue in the QEMU workaround with an underscore. Following ISA string won't confuse the QEMU workaround. * "rv64imac_suclic" (RV64I + M + A + C + delimited "Suclic") This fix is to tell kernel developers the nature of this workaround precisely. There are some "Su*" extensions to be ratified but don't worry about this workaround too much. This commit comes with other minor editorial fixes (for minor wording and spacing issues, without changing the meaning). Signed-off-by:
Tsukasa OI <research_trasio@irq.a4lg.com> Reviewed-by:
-
Song Shuai authored
The pt_level uses CONFIG_PGTABLE_LEVELS to display page table names. But if page mode is downgraded from kernel cmdline or restricted by the hardware in 64BIT, it will give a wrong name. Like, using no4lvl for sv39, ptdump named the 1G-mapping as "PUD" that should be "PGD": 0xffffffd840000000-0xffffffd900000000 0x00000000c0000000 3G PUD D A G . . W R V So select "P4D/PUD" or "PGD" via pgtable_l5/4_enabled to correct it. Fixes: e8a62cc2 ("riscv: Implement sv48 support") Reviewed-by:
-
Palmer Dabbelt authored
A few of the other page table level helpers are defined on rv32, but not pgtable_l5_enabled. This adds the definition as a constant and converts pgtable_l4_enabled to a constant as well. Link: https://lore.kernel.org/r/20230830044129.11481-2-palmer@rivosinc.comSigned-off-by:
-
Anup Patel authored
When Sstc is available the RISC-V timer clock_event_device should be the preferred clock_event_device hence we increase clock_event_device rating for Sstc. Signed-off-by:
Anup Patel <apatel@ventanamicro.com> Reviewed-by:
-
Anup Patel authored
Currently, we enable/disable timer interrupt at runtime to start/stop timer events. This makes timer interrupt state go out-of-sync with the Linux interrupt subsystem. To address the above issue, we can stop a per-HART timer interrupt by setting U64_MAX in timecmp CSR (or sbi_set_timer()) at the time of handling timer interrupt. Signed-off-by:
-
Palmer Dabbelt authored
Andrew Jones <ajones@ventanamicro.com> says: In order for usermode to issue cbo.zero, it needs privilege granted to issue the extension instruction (patch 2) and to know that the extension is available and its block size (patch 3). Patch 1 could be separate from this series (it just fixes up some error messages), patches 4-5 convert the hwprobe selftest to a statically-linked, TAP test and patch 6 adds a new hwprobe test for the new information as well as testing CBO instructions can or cannot be issued as appropriate. * b4-shazam-merge: RISC-V: selftests: Add CBO tests RISC-V: selftests: Convert hwprobe test to kselftest API RISC-V: selftests: Statically link hwprobe test RISC-V: hwprobe: Expose Zicboz extension and its block size RISC-V: Enable cbo.zero in usermode RISC-V: Make zicbom/zicboz errors consistent Link: https://lore.kernel.org/r/20230918131518.56803-8-ajones@ventanamicro.comSigned-off-by:
-
Palmer Dabbelt authored
Song Shuai <songshuaishuai@tinylab.org> says: This series contains a cleanup for riscv_kexec_relocate() and two fixups for KEXEC_FILE and had passed the basic kexec test in my 64bit Qemu-virt. You can use this kexec-tools[3] to test the kexec-file-syscall and these patches. riscv: kexec: Cleanup riscv_kexec_relocate (patch1) ================================================== For readability and simplicity, cleanup the riscv_kexec_relocate code: - Re-sort the first 4 `mv` instructions against `riscv_kexec_method()` - Eliminate registers for debugging (s9,s10,s11) and storing const-value (s5,s6) - Replace `jalr` with `jr` for no-link jump riscv: kexec: Align the kexeced kernel entry (patch2) ================================================== The current riscv boot protocol requires 2MB alignment for RV64 and 4MB alignment for RV32. In KEXEC_FILE path, the elf_find_pbase() function should align the kexeced kernel entry according to the requirement, otherwise the kexeced kernel would silently BUG at the setup_vm(). riscv: kexec: Remove -fPIE for PURGATORY_CFLAGS (patch3) ================================================== With CONFIG_RELOCATABLE enabled, KBUILD_CFLAGS had a -fPIE option and then the purgatory/string.o was built to reference _ctype symbol via R_RISCV_GOT_HI20 relocations which can't be handled by purgatory. As a consequence, the kernel failed kexec_load_file() with: [ 880.386562] kexec_image: The entry point of kernel at 0x80200000 [ 880.388650] kexec_image: Unknown rela relocation: 20 [ 880.389173] kexec_image: Error loading purgatory ret=-8 So remove the -fPIE option for PURGATORY_CFLAGS to generate R_RISCV_PCREL_HI20 relocations type making puragtory work as it was. arch/riscv/kernel/elf_kexec.c | 8 ++++- arch/riscv/kernel/kexec_relocate.S | 52 +++++++++++++----------------- arch/riscv/purgatory/Makefile | 4 +++ 3 files changed, 34 insertions(+), 30 deletions(-) * b4-shazam-merge: riscv: kexec: Remove -fPIE for PURGATORY_CFLAGS riscv: kexec: Align the kexeced kernel entry riscv: kexec: Cleanup riscv_kexec_relocate Link: https://lore.kernel.org/r/20230907103304.590739-1-songshuaishuai@tinylab.orgSigned-off-by:
-
- 27 Oct, 2023 4 commits
-
-
Sami Tolvanen authored
On RISC-V, the return address is before the current frame pointer, unlike on most other architectures. Use the correct offset on RISC-V to fix the CFI_BACKWARD test. Signed-off-by:
Sami Tolvanen <samitolvanen@google.com> Acked-by:
Kees Cook <keescook@chromium.org> Tested-by:
Nathan Chancellor <nathan@kernel.org> Link: https://lore.kernel.org/r/20230927224757.1154247-14-samitolvanen@google.comSigned-off-by:
-
Sami Tolvanen authored
When both CONFIG_IRQ_STACKS and SCS are enabled, also use a separate per-CPU shadow call stack. Signed-off-by:
-
Sami Tolvanen authored
Implement CONFIG_SHADOW_CALL_STACK for RISC-V. When enabled, the compiler injects instructions to all non-leaf C functions to store the return address to the shadow stack and unconditionally load it again before returning, which makes it harder to corrupt the return address through a stack overflow, for example. The active shadow call stack pointer is stored in the gp register, which makes SCS incompatible with gp relaxation. Use --no-relax-gp to ensure gp relaxation is disabled and disable global pointer loading. Add SCS pointers to struct thread_info, implement SCS initialization, and task switching Signed-off-by:
-
Sami Tolvanen authored
In Clang 17, -fsanitize=shadow-call-stack uses the newly declared platform register gp for storing shadow call stack pointers. As this is obviously incompatible with gp relaxation, in preparation for CONFIG_SHADOW_CALL_STACK support, move global pointer loading to a single macro, which we can cleanly disable when SCS is used instead. Link: https://reviews.llvm.org/rGaa1d2693c256 Link: https://github.com/riscv-non-isa/riscv-elf-psabi-doc/commit/a484e843e6eeb51f0cb7b8819e50da6d2444d769Signed-off-by:
-
