Tell the device the page size used by the OS.
Reviewed-by: Vishnu Dasa <vdasa@vmware.com>
Signed-off-by: Jorgen Hansen <jhansen@vmware.com>
Link: https://lore.kernel.org/r/20220207102725.2742-5-jhansen@vmware.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Detect the VMCI DMA datagram capability, and if present, ack it
to the device.
Reviewed-by: Vishnu Dasa <vdasa@vmware.com>
Signed-off-by: Jorgen Hansen <jhansen@vmware.com>
Link: https://lore.kernel.org/r/20220207102725.2742-4-jhansen@vmware.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Detect the support for MMIO access through examination of the length
of the region requested in BAR1. If it is 256KB, the VMCI device
supports MMIO access to registers.

If MMIO access is supported, map the area of the region used for
MMIO access (64KB size at offset 128KB).

Add wrapper functions for accessing 32 bit register accesses through
either MMIO or IO ports based on device configuration.

Sending and receiving datagrams through iowrite8_rep/ioread8_rep is
left unchanged for now, and will be addressed in a later change.
Reviewed-by: Vishnu Dasa <vdasa@vmware.com>
Signed-off-by: Jorgen Hansen <jhansen@vmware.com>
Link: https://lore.kernel.org/r/20220207102725.2742-3-jhansen@vmware.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Update formatting of existing register defines in preparation for
adding additional register definitions for the VMCI device.
Reviewed-by: Vishnu Dasa <vdasa@vmware.com>
Signed-off-by: Jorgen Hansen <jhansen@vmware.com>
Link: https://lore.kernel.org/r/20220207102725.2742-2-jhansen@vmware.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

A successful ida_simple_get() should be balanced by a corresponding
ida_simple_remove().

Add the missing call in the error handling path of the probe.

While at it, switch to ida_alloc()/ida_free() instead to
ida_simple_get()/ida_simple_remove().
The latter is deprecated and more verbose.

Fixes: 4f556bc0 ("misc: cardreader: add new Alcor Micro Cardreader PCI driver")
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/918a9875b7f67b7f8f123c4446452603422e8c5e.1644136776.git.christophe.jaillet@wanadoo.frSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The buffer was bigger than necessary, and the while loop not very
canonical. Also better use i as variable name for an index.
Reported-by: kernel test robot <lkp@intel.com>
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Link: https://lore.kernel.org/r/20220206023845.bpzxtjohekclffra@beginSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Users needing it with the dectlk synth report that a 100ms flush delay
is still noticeable and prefer to set it to e.g. 10ms. This leaves the
default to 4000ms (since hitting it is a sign that the cable is faulty
and should be replaced), but allows to set it as short as 10ms.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Link: https://lore.kernel.org/r/20220205232957.bc6o6yyt5hitg754@beginSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Variable buffer_config is being assigned a value that is never read, it
is being re-assigned later on. The assignment is redundant and can be
removed.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20220130232910.9313-1-colin.i.king@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

On all arch using hpet, only i386 miss writeq/readq.
Instead of rewriting them, use linux/io-64-nonatomic-lo-hi.h which
already have them.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Link: https://lore.kernel.org/r/20220125140352.4085290-1-clabbe@baylibre.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fix all style issue for braces and alignment
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Link: https://lore.kernel.org/r/20220125140311.4084998-1-clabbe@baylibre.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

A struct device can never be devm_alloc()'ed.
Here, it is embedded in "struct fsi_master", and "struct fsi_master" is
embedded in "struct fsi_master_aspeed".

Since "struct device" is embedded, the data structure embedding it must be
released with the release function, as is already done here.

So use kzalloc() instead of devm_kzalloc() when allocating "aspeed" and
update all error handling branches accordingly.

This prevent a potential double free().

This also fix another issue if opb_readl() fails. Instead of a direct
return, it now jumps in the error handling path.

Fixes: 606397d6 ("fsi: Add ast2600 master driver")
Suggested-by: Greg KH <gregkh@linuxfoundation.org>
Suggested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/2c123f8b0a40dc1a061fae982169fe030b4f47e6.1641765339.git.christophe.jaillet@wanadoo.frSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fixes the checkpatch.pl error:

< WARNING: Missing a blank line after declarations
< #97: FILE: drivers/dio/dio.c:97:
< +     unsigned int i;
< +     for (i = 0; i < ARRAY_SIZE(names); i++)
Signed-off-by: Aleksa Vučković <aleksav013@gmail.com>
Link: https://lore.kernel.org/r/20220127135054.27281-7-aleksav013@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fixes the checkpatch.pl error:

< ERROR: code indent should use tabs where possible
< #61: FILE: drivers/dio/dio.c:61:
< +        int id;$
<
< WARNING: please, no spaces at the start of a line
< #61: FILE: drivers/dio/dio.c:61:
< +        int id;$
<
< ERROR: code indent should use tabs where possible
< #62: FILE: drivers/dio/dio.c:62:
< +        const char *name;$
<
< WARNING: please, no spaces at the start of a line
< #62: FILE: drivers/dio/dio.c:62:
< +        const char *name;$

+ 44 more errors of type "code indent should use tabs where
possible"
+ 41 more warnings of type "please, no spaces at the start of a
line"
Signed-off-by: Aleksa Vučković <aleksav013@gmail.com>
Link: https://lore.kernel.org/r/20220127135054.27281-6-aleksav013@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fixes the checkpatch.pl error:

< ERROR: space required after that ',' (ctx:VxV)
< #239: FILE: drivers/dio/dio.c:239:
< +                strcpy(dev->name,dio_getname(dev->id));
Signed-off-by: Aleksa Vučković <aleksav013@gmail.com>
Link: https://lore.kernel.org/r/20220127135054.27281-5-aleksav013@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fixes the checkpatch.pl error:

< ERROR: space prohibited after that open parenthesis '('
< #67: FILE: drivers/dio/dio.c:67:
< +#define DIOFBNAME(x) { DIO_ENCODE_ID( DIO_ID_FBUFFER, DIO_ID2_##x),
DIO_DESC2_##x }
Signed-off-by: Aleksa Vučković <aleksav013@gmail.com>
Link: https://lore.kernel.org/r/20220127135054.27281-4-aleksav013@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fixes the checkpatch.pl errors and warnings:

< ERROR: trailing whitespace
< #5: FILE: drivers/dio/dio.c:5:
< + * $
<
< ERROR: trailing whitespace
< #11: FILE: drivers/dio/dio.c:11:
< + *    This means that framebuffers should pass it as $
<
< ERROR: trailing whitespace
< #17: FILE: drivers/dio/dio.c:17:
< + *    Every DIO card has a fixed interrupt priority level. This
function $
<
< ERROR: trailing whitespace
< #20: FILE: drivers/dio/dio.c:20:
< + *    Return a character string describing this board [might be "" if
$
<
< ERROR: trailing whitespace
< #25: FILE: drivers/dio/dio.c:25:
< + * This file is based on the way the Amiga port handles Zorro II
cards, $

+ 15 more errors and warnings of type "trailing whitespace"
Signed-off-by: Aleksa Vučković <aleksav013@gmail.com>
Link: https://lore.kernel.org/r/20220127135054.27281-3-aleksav013@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fixes the checkpatch.pl errors and warnings:

< ERROR: open brace '{' following struct go on the same line
< +struct dioname
< +{
<
< ERROR: that open brace { should be on the previous line
< +static struct dioname names[] =
< +{
<
< ERROR: that open brace { should be on the previous line
< +        for (scode = 0; scode < DIO_SCMAX; ++scode)
< +        {
<
< WARNING: braces {} are not necessary for any arm of this statement
< +        if (scode >= DIOII_SCBASE) {
< [...]
< +        } else if (scode > DIO_SCMAX || scode < 0)
< [...]
< +        else if (DIO_SCINHOLE(scode))
< [...]
Signed-off-by: Aleksa Vučković <aleksav013@gmail.com>
Link: https://lore.kernel.org/r/20220127135054.27281-2-aleksav013@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fixes the checkpatch.pl warning:

< WARNING: Use #include <linux/io.h> instead of <asm/io.h>
< #36: FILE: drivers/dio/dio.c:36:
< +#include <asm/io.h>                             /* readb() */
Signed-off-by: Aleksa Vučković <aleksav013@gmail.com>
Link: https://lore.kernel.org/r/20220127135054.27281-1-aleksav013@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Open Profile for DICE is an open protocol for measured boot compatible
with the Trusted Computing Group's Device Identifier Composition
Engine (DICE) specification. The generated Compound Device Identifier
(CDI) certificates represent the hardware/software combination measured
by DICE, and can be used for remote attestation and sealing.

Add a driver that exposes reserved memory regions populated by firmware
with DICE CDIs and exposes them to userspace via a character device.

Userspace obtains the memory region's size from read() and calls mmap()
to create a mapping of the memory region in its address space. The
mapping is not allowed to be write+shared, giving userspace a guarantee
that the data were not overwritten by another process.

Userspace can also call write(), which triggers a wipe of the DICE data
by the driver. Because both the kernel and userspace mappings use
write-combine semantics, all clients observe the memory as zeroed after
the syscall has returned.

Cc: Andrew Scull <ascull@google.com>
Cc: Will Deacon <will@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: David Brazdil <dbrazdil@google.com>
Link: https://lore.kernel.org/r/20220126231237.529308-3-dbrazdil@google.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add DeviceTree bindings for Open Profile for DICE, an open protocol for
measured boot. Firmware uses DICE to measure the hardware/software
combination and generates Compound Device Identifier (CDI) certificates.
These are stored in memory and the buffer is described in the DT as
a reserved memory region compatible with 'google,open-dice'.

'no-map' is required to ensure the memory region is never treated by
the kernel as system memory.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: David Brazdil <dbrazdil@google.com>
Link: https://lore.kernel.org/r/20220126231237.529308-2-dbrazdil@google.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

A warning is reported because a colon was dropped, it is found by running
scripts/kernel-doc, which is caused by using 'make W=1'.
drivers/mux/core.c:44: warning: Function parameter or member 'state' not
described in 'mux_state'
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Peter Rosin <peda@axentia.se>
Link: https://lore.kernel.org/r/a9a970fc-63f9-5ab9-4983-fba5b01bebe2@axentia.seSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This makes it easier to parse.
Signed-off-by: Peter Rosin <peda@axentia.se>
Link: https://lore.kernel.org/r/75067db8-0264-c49c-daa8-d7a877932711@axentia.seSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

And implement devm_mux_state_get in terms of the new function.

Now we have both mux_state_get and mux_state_put as convenient functions
ready to be exported should someone ever need unmanaged interfaces.
Tested-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Peter Rosin <peda@axentia.se>
Link: https://lore.kernel.org/r/6f8cfdfd-9fa6-40d1-09b3-0c9fc50835ac@axentia.seSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In some cases, we might need to provide the state of the mux to be set for
the operation of a given peripheral. Therefore, pass this information using
mux-states property.

Link: https://lore.kernel.org/lkml/20211123081222.27979-1-a-govindraju@ti.comSigned-off-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Peter Rosin <peda@axentia.se> (minor edits)
Link: https://lore.kernel.org/r/aac25be8-9515-a980-f7cb-709938c84822@axentia.seSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Return value from list_lru_count() directly instead
of taking this in another redundant variable.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Signed-off-by: CGEL ZTE <cgel.zte@gmail.com>
Link: https://lore.kernel.org/r/20220104113500.602158-1-chi.minghao@zte.com.cnSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

If the pps-gpio driver was probed prior to the GPIO device it uses, the
devm_gpiod_get call returned an -EPROBE_DEFER error, but pps_gpio_probe
replaced that error code with -EINVAL, causing the pps-gpio probe to
fail and not be retried later. Propagate the error return value so that
deferred probe works properly.

Fixes: 16152045 (pps: new client driver using GPIO)
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Rodolfo Giometti <giometti@enneenne.com>
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Signed-off-by: Rodolfo Giometti <giometti@enneenne.com>
Link: https://lore.kernel.org/r/20220112205214.2060954-1-robert.hancock@calian.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Commit ee2f2074 ("greybus: svc: reconfig APBridgeA-Switch link to
handle required load") added a temporary hack which reconfigures the
link at HELLO by abusing the deferred request processing mechanism.

Restructure the HELLO request processing so that the link-configuration
work is queued before creating the debugfs files and add a comment
explaining why it's there.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20220202113347.1288-4-johan@kernel.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

While currently safe, it is unnecessary (and confusing) to try to
destroy the watchdog when watchdog creation fails.

Change the corresponding error path to only deregister the svc.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20220202113347.1288-3-johan@kernel.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Cleanup if gb_svc_queue_deferred_request() fails.

Link: https://lore.kernel.org/r/20220202072016.GA6748@kili
Fixes: ee2f2074 ("greybus: svc: reconfig APBridgeA-Switch link to handle required load")
Cc: stable@vger.kernel.org      # 4.9
[johan: fix commit summary prefix and rename label ]
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20220202113347.1288-2-johan@kernel.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

We need the char/misc fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull irq fixes from Borislav Petkov:

 - Drop an unused private data field in the AIC driver

 - Various fixes to the realtek-rtl driver

 - Make the GICv3 ITS driver compile again in !SMP configurations

 - Force reset of the GICv3 ITSs at probe time to avoid issues during kexec

 - Yet another kfree/bitmap_free conversion

 - Various DT updates (Renesas, SiFive)

* tag 'irq_urgent_for_v5.17_rc2_p2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  dt-bindings: interrupt-controller: sifive,plic: Group interrupt tuples
  dt-bindings: interrupt-controller: sifive,plic: Fix number of interrupts
  dt-bindings: irqchip: renesas-irqc: Add R-Car V3U support
  irqchip/gic-v3-its: Reset each ITS's BASERn register before probe
  irqchip/gic-v3-its: Fix build for !SMP
  irqchip/loongson-pch-ms: Use bitmap_free() to free bitmap
  irqchip/realtek-rtl: Service all pending interrupts
  irqchip/realtek-rtl: Fix off-by-one in routing
  irqchip/realtek-rtl: Map control data to virq
  irqchip/apple-aic: Drop unused ipi_hwirq field

Pull perf fixes from Borislav Petkov:

 - Prevent accesses to the per-CPU cgroup context list from another CPU
   except the one it belongs to, to avoid list corruption

 - Make sure parent events are always woken up to avoid indefinite hangs
   in the traced workload

* tag 'perf_urgent_for_v5.17_rc2_p2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/core: Fix cgroup event list management
  perf: Always wake the parent event

Pull scheduler fix from Borislav Petkov:
 "Make sure the membarrier-rseq fence commands are part of the reported
  set when querying membarrier(2) commands through MEMBARRIER_CMD_QUERY"

* tag 'sched_urgent_for_v5.17_rc2_p2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/membarrier: Fix membarrier-rseq fence command missing from query bitmask

Pull x86 fixes from Borislav Petkov:

 - Add another Intel CPU model to the list of CPUs supporting the
   processor inventory unique number

 - Allow writing to MCE thresholding sysfs files again - a previous
   change had accidentally disabled it and no one noticed. Goes to show
   how much is this stuff used

* tag 'x86_urgent_for_v5.17_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/cpu: Add Xeon Icelake-D to list of CPUs that support PPIN
  x86/MCE/AMD: Allow thresholding interface updates after init

Merge misc fixes from Andrew Morton:
 "12 patches.

  Subsystems affected by this patch series: sysctl, binfmt, ia64, mm
  (memory-failure, folios, kasan, and psi), selftests, and ocfs2"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  ocfs2: fix a deadlock when commit trans
  jbd2: export jbd2_journal_[grab|put]_journal_head
  psi: fix "defined but not used" warnings when CONFIG_PROC_FS=n
  psi: fix "no previous prototype" warnings when CONFIG_CGROUPS=n
  mm, kasan: use compare-exchange operation to set KASAN page tag
  kasan: test: fix compatibility with FORTIFY_SOURCE
  tools/testing/scatterlist: add missing defines
  mm: page->mapping folio->mapping should have the same offset
  memory-failure: fetch compound_head after pgmap_pfn_valid()
  ia64: make IA64_MCA_RECOVERY bool instead of tristate
  binfmt_misc: fix crash when load/unload module
  include/linux/sysctl.h: fix register_sysctl_mount_point() return type

commit 6f1b2285 introduces a regression which can deadlock as
follows:

  Task1:                              Task2:
  jbd2_journal_commit_transaction     ocfs2_test_bg_bit_allocatable
  spin_lock(&jh->b_state_lock)        jbd_lock_bh_journal_head
  __jbd2_journal_remove_checkpoint    spin_lock(&jh->b_state_lock)
  jbd2_journal_put_journal_head
  jbd_lock_bh_journal_head

Task1 and Task2 lock bh->b_state and jh->b_state_lock in different
order, which finally result in a deadlock.

So use jbd2_journal_[grab|put]_journal_head instead in
ocfs2_test_bg_bit_allocatable() to fix it.

Link: https://lkml.kernel.org/r/20220121071205.100648-3-joseph.qi@linux.alibaba.com
Fixes: 6f1b2285 ("ocfs2: fix race between searching chunks and release journal_head from buffer_head")
Signed-off-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Reported-by: Gautham Ananthakrishna <gautham.ananthakrishna@oracle.com>
Tested-by: Gautham Ananthakrishna <gautham.ananthakrishna@oracle.com>
Reported-by: Saeed Mirzamohammadi <saeed.mirzamohammadi@oracle.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Jun Piao <piaojun@huawei.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Patch series "ocfs2: fix a deadlock case".

This fixes a deadlock case in ocfs2.  We firstly export jbd2 symbols
jbd2_journal_[grab|put]_journal_head as preparation and later use them
in ocfs2 insread of jbd_[lock|unlock]_bh_journal_head to fix the
deadlock.

This patch (of 2):

This exports symbols jbd2_journal_[grab|put]_journal_head, which will be
used outside modules, e.g.  ocfs2.

Link: https://lkml.kernel.org/r/20220121071205.100648-2-joseph.qi@linux.alibaba.comSigned-off-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Gautham Ananthakrishna <gautham.ananthakrishna@oracle.com>
Cc: Saeed Mirzamohammadi <saeed.mirzamohammadi@oracle.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When CONFIG_PROC_FS is disabled psi code generates the following
warnings:

  kernel/sched/psi.c:1364:30: warning: 'psi_cpu_proc_ops' defined but not used [-Wunused-const-variable=]
      1364 | static const struct proc_ops psi_cpu_proc_ops = {
           |                              ^~~~~~~~~~~~~~~~
  kernel/sched/psi.c:1355:30: warning: 'psi_memory_proc_ops' defined but not used [-Wunused-const-variable=]
      1355 | static const struct proc_ops psi_memory_proc_ops = {
           |                              ^~~~~~~~~~~~~~~~~~~
  kernel/sched/psi.c:1346:30: warning: 'psi_io_proc_ops' defined but not used [-Wunused-const-variable=]
      1346 | static const struct proc_ops psi_io_proc_ops = {
           |                              ^~~~~~~~~~~~~~~

Make definitions of these structures and related functions conditional
on CONFIG_PROC_FS config.

Link: https://lkml.kernel.org/r/20220119223940.787748-3-surenb@google.com
Fixes: 0e94682b ("psi: introduce psi monitor")
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When CONFIG_CGROUPS is disabled psi code generates the following
warnings:

  kernel/sched/psi.c:1112:21: warning: no previous prototype for 'psi_trigger_create' [-Wmissing-prototypes]
      1112 | struct psi_trigger *psi_trigger_create(struct psi_group *group,
           |                     ^~~~~~~~~~~~~~~~~~
  kernel/sched/psi.c:1182:6: warning: no previous prototype for 'psi_trigger_destroy' [-Wmissing-prototypes]
      1182 | void psi_trigger_destroy(struct psi_trigger *t)
           |      ^~~~~~~~~~~~~~~~~~~
  kernel/sched/psi.c:1249:10: warning: no previous prototype for 'psi_trigger_poll' [-Wmissing-prototypes]
      1249 | __poll_t psi_trigger_poll(void **trigger_ptr,
           |          ^~~~~~~~~~~~~~~~

Change the declarations of these functions in the header to provide the
prototypes even when they are unused.

Link: https://lkml.kernel.org/r/20220119223940.787748-2-surenb@google.com
Fixes: 0e94682b ("psi: introduce psi monitor")
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>