Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>

Since header_preamble_size is 0 for SMB2+ we can remove it in those
code paths that are only invoked from SMB2.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

struct smb2_hdr is now just a wrapper for smb2_sync_hdr.
We can thus get rid of smb2_hdr completely and access the sync header directly.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

CIFS: 511c54a2 adds a check for session expiry, status STATUS_NETWORK_SESSION_EXPIRED, however the server can also respond with STATUS_USER_SESSION_DELETED in cases where the session has been idle for some time and the server reaps the session to recover resources.

Handle this additional status in the same way as SESSION_EXPIRED.
Signed-off-by: Mark Syms <mark.syms@citrix.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
CC: Stable <stable@vger.kernel.org>

Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

smb2_hdr is just a wrapper around smb2_sync_hdr at this stage
and smb2_hdr is going away.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

The two structures smb2_oplock_breaq_req/rsp are now basically identical.
Replace this with a single definition of a smb2_oplock_break structure.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

Separate out all the 4 byte rfc1002 headers so that they are no longer
part of the SMB2 header structures to prepare for future work to add
compounding support.

Update the smb3 transform header processing that we no longer have
a rfc1002 header at the start of this structure.

Update smb2_readv_callback to accommodate that the first iovector in the
response is no the smb2 header and no longer a rfc1002 header.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

The server detects reconnect by the (non-zero) value in PreviousSessionId
of SMB2/SMB3 SessionSetup request, but this behavior regressed due
to commit 166cea4d
("SMB2: Separate RawNTLMSSP authentication from SMB2_sess_setup")

CC: Stable <stable@vger.kernel.org>
CC: Sachin Prabhu <sprabhu@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>

Signed-off-by: Steve French <smfrench@gmail.com>

add two tracepoints for open completion. One for error one for completion (open_done).
Sample output below

            TASK-PID   CPU#  ||||    TIMESTAMP  FUNCTION
               | |       |   ||||       |         |
            bash-15348 [007] .... 42441.027492: smb3_enter: 	cifs_lookup: xid=45
            bash-15348 [007] .... 42441.028214: smb3_cmd_err: 	sid=0x6173e4ce tid=0xa05150e6 cmd=5 mid=105 status=0xc0000034 rc=-2
            bash-15348 [007] .... 42441.028219: smb3_open_err: xid=45 sid=0x6173e4ce tid=0xa05150e6 cr_opts=0x0 des_access=0x80 rc=-2
            bash-15348 [007] .... 42441.028225: smb3_exit_done: 	cifs_lookup: xid=45
          fop777-24560 [002] .... 42442.627617: smb3_enter: 	cifs_revalidate_dentry_attr: xid=46
          fop777-24560 [003] .... 42442.628301: smb3_cmd_err: 	sid=0x6173e4ce tid=0xa05150e6 cmd=5 mid=106 status=0xc0000034 rc=-2
          fop777-24560 [003] .... 42442.628319: smb3_open_err: xid=46 sid=0x6173e4ce tid=0xa05150e6 cr_opts=0x0 des_access=0x80 rc=-2
          fop777-24560 [003] .... 42442.628335: smb3_enter: 	cifs_atomic_open: xid=47
          fop777-24560 [003] .... 42442.629587: smb3_cmd_done: 	sid=0x6173e4ce tid=0xa05150e6 cmd=5 mid=107
          fop777-24560 [003] .... 42442.629592: smb3_open_done: xid=47 sid=0x6173e4ce tid=0xa05150e6 fid=0xb8a0984d cr_opts=0x40 des_access=0x40000080
Signed-off-by: Steve French <smfrench@gmail.com>

For smb1 nocase can be specified on mount.  Allow displaying it
in debug data.
Signed-off-by: Steve French <smfrench@gmail.com>

Signed-off-by: Steve French <smfrench@gmail.com>

Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

If "posix" (or synonym "unix" for backward compatibility) specified on mount,
and server advertises support for SMB3.11 POSIX negotiate context, then
enable the new posix extensions on the tcon.  This can be viewed by
looking for "posix" in the mount options displayed by /proc/mounts
for that mount (ie if posix extensions allowed by server and the
experimental POSIX extensions also requested on the mount by specifying
"posix" at mount time).

Also add check to warn user if conflicting unix/nounix or posix/noposix specified
on mount.
Signed-off-by: Steve French <smfrench@gmail.com>

Unlike CIFS where UNIX/POSIX extensions had been negotiatable,
SMB3 did not have POSIX extensions yet.  Add the new SMB3.11
POSIX negotiate context to ask the server whether it can
support POSIX (and thus whether we can send the new POSIX open
context).
Signed-off-by: Steve French <smfrench@gmail.com>

To improve security it may be helpful to have additional ways to restrict the
ability to override the default dialects (SMB2.1, SMB3 and SMB3.02) on mount
with old dialects (CIFS/SMB1 and SMB2) since vers=1.0 (CIFS/SMB1) and vers=2.0
are weaker and less secure.

Add a module parameter "disable_legacy_dialects"
(/sys/module/cifs/parameters/disable_legacy_dialects) which can be set to
1 (or equivalently Y) to forbid use of vers=1.0 or vers=2.0 on mount.

Also cleans up a few build warnings about globals for various module parms.
Signed-off-by: Steve French <smfrench@gmail.com>

Note which ones of the module params are cifs dialect only
(N/A for default dialect now that has moved to SMB2.1 or later)
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>

RHBZ: 1539612

Lets show the "w" bit for those files have a .write interface to set/enable/...
the feature.
Reported-by: Xiaoli Feng <xifeng@redhat.com>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

We really don't want to be encouraging people to use the old
(less secure) cifs dialect (SMB1) and it can be confusing for them
with SMB3 (or later) being recommended but the module name is cifs.

Add a module alias for "smb3" to cifs.ko to make this less confusing.
Signed-off-by: Steve French <smfrench@gmail.com>

RHBZ: 1539617

Check that, if it is not a boolean, the value the user tries
to write to /proc/fs/cifs/cifsFYI is valid and return an error
if not.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reported-by: Xiaoli Feng <xifeng@redhat.com>

RHBZ: 1566345

When truncating a file we always do this synchronously to the server.
Thus we need to make sure that the cached inode metadata is
marked as stale so that on next getattr we will refresh the metadata.
In this particular bug we want to ensure that both ctime and mtime
are updated and become visible to the application after a truncate.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reported-by: Xiaoli Feng <xifeng@redhat.com>

When loooking at the logs for the new trace-cmd tracepoints for cifs,
it would help to know which tid is for which share (UNC name) so
update /proc/fs/cifs/DebugData to display the tid.
Also display Maximal Access which was missing as well.

Now the entry for typical entry for a tcon (in proc/fs/cifs/) looks
like:

1) \\localhost\test Mounts: 1 DevInfo: 0x20 Attributes: 0x1006f
	PathComponentMax: 255 Status: 1 type: DISK
	Share Capabilities: None Aligned, Partition Aligned,	Share Flags: 0x0
	tid: 0xe0632a55	Optimal sector size: 0x200	Maximal Access: 0x1f01ff
Signed-off-by: Steve French <smfrench@gmail.com>

Signed-off-by: Steve French <smfrench@gmail.com>

Fix a few cases where we were not freeing the xid which led to
active requests being non-zero at unmount time.
Signed-off-by: Steve French <smfrench@gmail.com>
CC: Stable <stable@vger.kernel.org>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>

When direct I/O is used, the data buffer may not always align to page
boundaries. Introduce a page offset in transport data structures to
describe the location of the buffer within the page.

Also change the function to pass the page offset when sending data to
transport.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

Although dmesg logs and wireshark network traces can be
helpful, being able to dynamically enable/disable tracepoints
(in this case via the kernel ftrace mechanism) can also be
helpful in more quickly debugging problems, and more
selectively tracing the events related to the bug report.

This patch adds 12 ftrace tracepoints to cifs.ko for SMB3 events
in some obvious locations.  Subsequent patches will add more
as needed.

Example use:
   trace-cmd record -e cifs
   <run test case>
   trace-cmd show

Various trace events can be filtered. See:
       trace-cmd list | grep cifs
for the current list of cifs tracepoints.

Sample output (from mount and writing to a file):

root@smf:/sys/kernel/debug/tracing/events/cifs# trace-cmd show
<snip>
      mount.cifs-6633  [006] ....  7246.936461: smb3_cmd_done: pid=6633 tid=0x0 sid=0x0 cmd=0 mid=0
      mount.cifs-6633  [006] ....  7246.936701: smb3_cmd_err:  pid=6633 tid=0x0 sid=0x3d9cf8e5 cmd=1 mid=1 status=0xc0000016 rc=-5
      mount.cifs-6633  [006] ....  7246.943055: smb3_cmd_done: pid=6633 tid=0x0 sid=0x3d9cf8e5 cmd=1 mid=2
      mount.cifs-6633  [006] ....  7246.943298: smb3_cmd_done: pid=6633 tid=0xf9447636 sid=0x3d9cf8e5 cmd=3 mid=3
      mount.cifs-6633  [006] ....  7246.943446: smb3_cmd_done: pid=6633 tid=0xf9447636 sid=0x3d9cf8e5 cmd=11 mid=4
      mount.cifs-6633  [006] ....  7246.943659: smb3_cmd_done: pid=6633 tid=0xe1b781a sid=0x3d9cf8e5 cmd=3 mid=5
      mount.cifs-6633  [006] ....  7246.943766: smb3_cmd_done: pid=6633 tid=0xe1b781a sid=0x3d9cf8e5 cmd=11 mid=6
      mount.cifs-6633  [006] ....  7246.943937: smb3_cmd_done: pid=6633 tid=0xe1b781a sid=0x3d9cf8e5 cmd=5 mid=7
      mount.cifs-6633  [006] ....  7246.944020: smb3_cmd_done: pid=6633 tid=0xe1b781a sid=0x3d9cf8e5 cmd=16 mid=8
      mount.cifs-6633  [006] ....  7246.944091: smb3_cmd_done: pid=6633 tid=0xe1b781a sid=0x3d9cf8e5 cmd=16 mid=9
      mount.cifs-6633  [006] ....  7246.944163: smb3_cmd_done: pid=6633 tid=0xe1b781a sid=0x3d9cf8e5 cmd=16 mid=10
      mount.cifs-6633  [006] ....  7246.944218: smb3_cmd_err:  pid=6633 tid=0xf9447636 sid=0x3d9cf8e5 cmd=11 mid=11 status=0xc0000225 rc=-2
      mount.cifs-6633  [006] ....  7246.944219: smb3_fsctl_err: xid=0 fid=0xffffffffffffffff tid=0xf9447636 sid=0x3d9cf8e5 class=0 type=393620 rc=-2
      mount.cifs-6633  [007] ....  7246.944353: smb3_cmd_done: pid=6633 tid=0xe1b781a sid=0x3d9cf8e5 cmd=16 mid=12
            bash-2071  [000] ....  7256.903844: smb3_cmd_done: pid=2071 tid=0xe1b781a sid=0x3d9cf8e5 cmd=5 mid=13
            bash-2071  [000] ....  7256.904172: smb3_cmd_done: pid=2071 tid=0xe1b781a sid=0x3d9cf8e5 cmd=16 mid=14
            bash-2071  [000] ....  7256.904471: smb3_cmd_done: pid=2071 tid=0xe1b781a sid=0x3d9cf8e5 cmd=17 mid=15
            bash-2071  [000] ....  7256.904950: smb3_cmd_done: pid=2071 tid=0xe1b781a sid=0x3d9cf8e5 cmd=5 mid=16
            bash-2071  [000] ....  7256.905305: smb3_cmd_done: pid=2071 tid=0xe1b781a sid=0x3d9cf8e5 cmd=17 mid=17
            bash-2071  [000] ....  7256.905688: smb3_cmd_done: pid=2071 tid=0xe1b781a sid=0x3d9cf8e5 cmd=6 mid=18
            bash-2071  [000] ....  7256.905809: smb3_write_done: xid=0 fid=0xd628f511 tid=0xe1b781a sid=0x3d9cf8e5 offset=0x0 len=0x1b
Signed-off-by: Steve French <stfrench@microsoft.com>
Acked-by: Ronnie Sahlberg <lsahlber@redhat.com>

Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>

Signed-off-by: Steve French <smfrench@gmail.com>

And make SMB2_close just a wrapper for SMB2_close_flags.
We need this as we will start to send SMB2_CLOSE pdus using special
flags.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>

In SMB2_open(), if we got a lease we need to store this in the fid structure
or else we will never be able to map a lease break back to which file/fid
it applies to.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>

Previous patches "cifs: update calc_size to take a server argument"
and
  "cifs: add server argument to the dump_detail method"
were broken if CONFIG_CIFS_DEBUG2 enabled
Signed-off-by: Steve French <smfrench@gmail.com>
CC: Ronnie Sahlberg <lsahlber@redhat.com>

and change the smb2 version to take heder_preamble_size into account
instead of hardcoding it as 4 bytes.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>

We need a struct TCP_Server_Info *server to this method as it calls
calc_size. The calc_size method will soon be changed to also
take a server argument.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>

In SMB2/SMB3 unlike in cifs we unnecessarily open the root of the share
over and over again in various places during mount and path revalidation
and also in statfs.  This patch cuts redundant traffic (opens and closes)
by simply keeping the directory handle for the root around (and reopening
it as needed on reconnect), so query calls don't require three round
trips to copmlete - just one, and eases load on network, client and
server (on mount alone, cuts network traffic by more than a third).

Also add a new cifs mount parm "nohandlecache" to allow users whose
servers might have resource constraints (eg in case they have a server
with so many users connecting to it that this extra handle per mount
could possibly be a resource concern).
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>

Merge tag 'kbuild-fixes-v4.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull more Kbuild fixes from Masahiro Yamada:

 - enable '-fno-tree-loop-im' only when supported

 - add '-fno-PIE' option before the asm-goto test

* tag 'kbuild-fixes-v4.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  Makefile: disable PIE before testing asm goto
  kbuild: gcov: enable -fno-tree-loop-im if supported

Pull ARM SoC fixes from Olof Johansson:
 "A few more fixes for v4.17:

   - a fix for a crash in scm_call_atomic on qcom platforms

   - display fix for Allwinner A10

   - a fix that re-enables ethernet on Allwinner H3 (C.H.I.P et al)

   - a fix for eMMC corruption on hikey

   - i2c-gpio descriptor tables for ixp4xx

  ... plus a small typo fix"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: Fix i2c-gpio GPIO descriptor tables
  arm64: dts: hikey: Fix eMMC corruption regression
  firmware: qcom: scm: Fix crash in qcom_scm_call_atomic1()
  ARM: sun8i: v3s: fix spelling mistake: "disbaled" -> "disabled"
  ARM: dts: sun4i: Fix incorrect clocks for displays
  ARM: dts: sun8i: h3: Re-enable EMAC on Orange Pi One

Pull x86 store buffer fixes from Thomas Gleixner:
 "Two fixes for the SSBD mitigation code:

   - expose SSBD properly to guests. This got broken when the CPU
     feature flags got reshuffled.

   - simplify the CPU detection logic to avoid duplicate entries in the
     tables"

* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/speculation: Simplify the CPU bug detection logic
  KVM/VMX: Expose SSBD properly to guests

Pull scheduler fixes from Thomas Gleixner:
 "Three fixes for scheduler and kthread code:

   - allow calling kthread_park() on an already parked thread

   - restore the sched_pi_setprio() tracepoint behaviour

   - clarify the unclear string for the scheduling domain debug output"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched, tracing: Fix trace_sched_pi_setprio() for deboosting
  kthread: Allow kthread_park() on a parked kthread
  sched/topology: Clarify root domain(s) debug string