Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

This function was being used only at one place so fold it in there.
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Shorten some member names not too aggressively since this driver might be gone
anyway soon.

Bart:
- minor fixes
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

- last_frame_position: only being written to once
- firmware_revision, product_id, vendor_id: used once, remove from struct
  idetape_tape_t and deal with them locally
- firmware_revision_num: only written to once
- tape_still_time_begin: completely unused
- tape_still_time: never written to; remove corresponding code chunk
- uncontrolled_last_pipeline_head: only once written to
- blocks_in_buffer: only written to
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

.. and replace it with plain enums.
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

... by adding a new typedef function pointer idetape_io_buf in order to call
the proper buffer i/o handler depending on the data direction.

Bart:
- move idetape_io_buf before idetape_pc_intr() comment
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

tape->speed_control is set to 1 in idetape_setup(), but, in calculate_speeds()
its value is tested for being 0, 1, or 2. Remove the if-branches where
tape->speed_control != 1 since they are never executed. Also, rename
calculate_speeds() by adding driver's prefix as is with the other function
names.
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

There should be no functional changes resulting from this patch.

Bart:
- remove needless "!!"
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Teach the debug logging macro to differentiate between log levels based on the
type of debug level enabled specifically instead of a threshold-based one.
Thus, convert tape->debug_level to a bitmask that is written to over /proc.

Also,
- cleanup and simplify the debug macro thus removing a lot of code lines,
- get rid of unused debug levels,
- adjust the loglevel at several places where it was simply missing (e.g.
  idetape_chrdev_open())
- move the tape ptr initialization up in idetape_chrdev_open() so that we can
  use it in the debug_log macro earlier in the function.
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

ide-cris.c:
* Add cris_setup_ports() helper and use it instead of ide_setup_ports()
  (fixes random value being set in ->io_ports[IDE_IRQ_OFFSET]).

buddha.c:
* Add buddha_setup_ports() helper and use it instead of ide_setup_ports().

falconide.c:
* Add falconide_setup_ports() helper and use it instead of ide_setup_ports(),
  also fix return value of falconide_init() while at it.

gayle.c:
* Add gayle_setup_ports() helper and use it instead of ide_setup_ports().

macide.c:
* Add macide_setup_ports() helper and use it instead of ide_setup_ports()
  (fixes incorrect value being set in ->io_ports[IDE_IRQ_OFFSET]).

q40ide.c:
* Fix q40_ide_setup_ports() comments.

ide.c:
* Remove no longer needed ide_setup_ports().

Cc: Mikael Starvik <starvik@axis.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Same BUG_ON() is present inside ide_set_handler().
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Remove write-only ->sata_misc[] from ide_hwif_t.

* Remove no longer used SATA_{MISC,PHY,IEN}_OFFSET defines.
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Replace incorrect CONFIG_BLK_DEV_IDE #ifdef in
  check_media_bay() by CONFIG_MAC_FLOPPY one.

* Replace incorrect CONFIG_BLK_DEV_IDE #ifdef-s by
  CONFIG_BLK_DEV_IDE_PMAC ones.

* check_media_bay() is used only by drivers/block/swim3.c
  so make this function available only if CONFIG_MAC_FLOPPY
  is defined.

* check_media_bay_by_base() and media_bay_set_ide_infos()
  are used only by drivers/ide/ppc/pmac.c so so make these
  functions available only if CONFIG_MAC_FLOPPY is defined.

v2:
* Remove ifdefs from function prototypes. (Andrew Morton)

Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

with module_param macro, the __setup code can be killed now:
	const __setup("all-generic-ide", ide_generic_all_on);

and the module name "generic.ko" is not descriptive to its functionality,
can be changed in Makefile, the "ide-pci-generic.ko" is better.

the ide-pci-generic.all-generic-ide parameter also documented
in Documentation/kernel-parameters.txt
Signed-off-by: Denis Cheng <crquan@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

drivers/ide/legacy/hd.c: In function 'hd_request':
drivers/ide/legacy/hd.c:424: warning: 'stat' may be used uninitialized in this function

gcc is being stupid.
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

drivers/ide/ide-acpi.c: In function 'ide_acpi_init':
drivers/ide/ide-acpi.c:175: warning: 'dev_handle' may be used uninitialized in this function
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

This is Palmchip BK3710 IDE controller support.

The IDE controller logic supports PIO, MultiWord-DMA and Ultra-DMA modes.
Supports interface to Compact Flash (CF) configured in True-IDE mode.

Bart:
- remove dead code
- fix ide_hwif_setup_dma() build problem
Signed-off-by: Anton Salnikov <asalnikov@ru.mvista.com>
Reviewed-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Reviewed-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

On Tuesday 05 February 2008, Linus Torvalds wrote:
> 
> On Sat, 2 Feb 2008, Bartlomiej Zolnierkiewicz wrote:
> > 
> > * next part of IDE probing code re-organization saga
> >   (that would be me)
> 
> This seems to cause very irritating and bogus messages for me:
> 
>       Probing IDE interface ide0...
>       Probing IDE interface ide1...
>       ide2: I/O resource 0x0-0x7 not free.
>       ide2: ports already in use, skipping probe
>       ide3: I/O resource 0x0-0x7 not free.
>       ide3: ports already in use, skipping probe
>       ide4: I/O resource 0x0-0x7 not free.
>       ide4: ports already in use, skipping probe
>       ide5: I/O resource 0x0-0x7 not free.
>       ide5: ports already in use, skipping probe
>       ide6: I/O resource 0x0-0x7 not free.
>       ide6: ports already in use, skipping probe
>       ide7: I/O resource 0x0-0x7 not free.
>       ide7: ports already in use, skipping probe
>       ide8: I/O resource 0x0-0x7 not free.
>       ide8: ports already in use, skipping probe
>       ide9: I/O resource 0x0-0x7 not free.
>       ide9: ports already in use, skipping probe
> 
> and that's just totally bogus. It shouldn't even request that region, 
> since it's not been allocated!

The commit 139ddfca ("ide: move handling of
I/O resources out of ide_probe_port()") changed the ordering of hwif->noprobe
check vs ide_hwif_request_regions() call (so that we now reserve I/O regions
before checking for hwif->noprobe).  However ide-generic host driver depended
on hwif->noprobe to be set for skipping probing of empty ide_hwifs[] slots.

Fix it by passing only indexes of non-empty slots to ide_device_add_all()
from ide_generic_init().
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
  [IA64] make pfm_get_task work with virtual pids
  [IA64] honor notify_die() returning NOTIFY_STOP
  [IA64] remove dead code: __cpu_{down,die} from !HOTPLUG_CPU
  [IA64] Appoint kvm/ia64 Maintainers
  [IA64] ia64_set_psr should use srlz.i
  [IA64] Export three symbols for module use
  [IA64] mca style cleanup
  [IA64] sn_hwperf semaphore to mutex
  [IA64] generalize attribute of fsyscall_gtod_data
  [IA64] efi.c Add /* never reached */ annotation
  [IA64] efi.c Spelling/punctuation fixes
  [IA64] Make efi.c mostly fit in 80 columns
  [IA64] aliasing-test: fix gcc warnings on non-ia64
  [IA64] Slim-down __clear_bit_unlock
  [IA64] Fix the order of atomic operations in restore_previous_kprobes on ia64
  [IA64] constify function pointer tables
  [IA64] fix userspace compile error in gcc_intrin.h

* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6:
  [S390] dcss: Initialize workqueue before using it.
  [S390] Remove BUILD_BUG_ON() in vmem code.
  [S390] sclp_tty/sclp_vt220: Fix scheduling while atomic
  [S390] dasd: fix panic caused by alias device offline
  [S390] dasd: add ifcc handling
  [S390] latencytop s390 support.
  [S390] Implement ext2_find_next_bit.
  [S390] Cleanup & optimize bitops.
  [S390] Define GENERIC_LOCKBREAK.
  [S390] console: allow vt220 console to be the only console
  [S390] Fix couple of section mismatches.
  [S390] Fix smp_call_function_mask semantics.
  [S390] Fix linker script.
  [S390] DEBUG_PAGEALLOC support for s390.
  [S390] cio: Add shutdown callback for ccwgroup.
  [S390] cio: Update documentation.
  [S390] cio: Clean up chsc response code handling.
  [S390] cio: make sense id procedure work with partial hardware response

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (21 commits)
  [PKT_SCHED]: vlan tag match
  [NET]: Add if_addrlabel.h to sanitized headers.
  [NET] rtnetlink.c: remove no longer used functions
  [ICMP]: Restore pskb_pull calls in receive function
  [INET]: Fix accidentally broken inet(6)_hash_connect's port offset calculations.
  [NET]: Remove further references to net-modules.txt
  bluetooth rfcomm tty: destroy before tty_close()
  bluetooth: blacklist another Broadcom BCM2035 device
  drivers/bluetooth/btsdio.c: fix double-free
  drivers/bluetooth/bpa10x.c: fix memleak
  bluetooth: uninlining
  bluetooth: hidp_process_hid_control remove unnecessary parameter dealing
  tun: impossible to deassert IFF_ONE_QUEUE or IFF_NO_PI
  hamradio: fix dmascc section mismatch
  [SCTP]: Fix kernel panic while received AUTH chunk with BAD shared key identifier
  [SCTP]: Fix kernel panic while received AUTH chunk while enabled auth
  [IPV4]: Formatting fix for /proc/net/fib_trie.
  [IPV6]: Fix sysctl compilation error.
  [NET_SCHED]: Add #ifdef CONFIG_NET_EMATCH in net/sched/cls_flow.c (latest git broken build)
  [IPV4]: Fix compile error building without CONFIG_FS_PROC
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
  [SPARC64]  pci_sun4v.c: Section fixes.

* 'agp-patches' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/agp-2.6:
  agp: remove flush_agp_mappings calls from new flush handling code
  intel-agp: introduce IS_I915 and do some cleanups..
  [intel_agp] fix name for G35 chipset
  intel-agp: fixup resource handling in flush code.
  intel-agp: add new chipset ID
  agp: remove unnecessary pci_dev_put
  agp: remove uid comparison as security check
  fix AGP warning
  agp/intel: Add chipset flushing support for i8xx chipsets.
  intel-agp: add chipset flushing support
  agp: add chipset flushing support to AGP interface

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  RDMA/nes: Add a driver for NetEffect RNICs
  IB/mthca: Return proper error codes from mthca_fmr_alloc()
  IB: Avoid marking __devinitdata as const
  IB/mlx4: Actually print out the driver version
  IB/ib_mthca: Pre-link receive WQEs in Tavor mode
  IB/mthca: Remove checks for srq->first_free < 0
  IB/fmr_pool: Allocate page list for pool FMRs only when caching enabled
  IB/srp: Retry stale connections
  mlx4_core: Don't read reserved fields in mlx4_QUERY_ADAPTER()
  IB/mthca: Don't read reserved fields in mthca_QUERY_ADAPTER()
  IPoIB: Remove a misleading debug print
  IPoIB: Handle bonding failover race for connected neighbours too
  IB/mthca: Fix and simplify page size calculation in mthca_reg_phys_mr()
  IB/ehca: Add PMA support
  IB/ehca: Update sma_attr also in case of disruptive config change
  IB/ehca: Prevent sending UD packets to QP0
  IB/cm: Add interim support for routed paths
  mlx4_core: Fix more section mismatches

Also fixed the include syntax while I was there.
Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Redo the calculation of NR_syscalls since that disappeared from i386 and
use a similar mechanism on x86_64.

We now figure out the size of the system call table in arch code and stick
that in syscall_table_size.  arch/um/kernel/skas/syscall.c defines
NR_syscalls in terms of that since its the only thing that needs to know
how many system calls there are.

The old mechananism that was used on x86_64 is gone.

arch/um/include/sysdep-i386/syscalls.h got some formatting since I was
looking at it.
Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Cc: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Tweak the UML defconfig -
      we probably don't need 256 old-style ptys - this slows down udev
noticably
      enable hostfs
      disable slab debugging - another noticable performance hit
Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The port_sem is already used as a mutex since it's using DECLARE_MUTEX(), but
the underlying construct is still a semaphore ..  This patch switches it over
to a struct mutex.
Signed-off-by: Daniel Walker <dwalker@mvista.com>
Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The plug_mem_mutex is already used as a mutex since it's using
DECLARE_MUTEX(), but the underlying construct is still a semaphore ..  This
patch switches it over to a struct mutex.
Signed-off-by: Daniel Walker <dwalker@mvista.com>
Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The ldt.semaphore conforms to the new struct mutex requirments, so I converted
it to use the new API and changed the name.
Signed-off-by: Daniel Walker <dwalker@mvista.com>
Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Downgrade one of the MAC validity checks.  If it's one that could be possibly
assigned to a physical NIC, then nothing will break.  So, emit a warning in
this case, but keep the requested MAC.
Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This patch takes care of a problem with the stopping code.

The function inside the while condition returns 0 to signify a problem.  A
problem could be for example a bad command or a bad version of the mconsole
client.  A bad command would terminate the stopping loop and resume the
kernel.  This is a problem.

A better solution is to make the loop infinite and don't leave it until we are
explicitly told to.
Signed-off-by: Karol Swietlicki <magotari@gmail.com>
Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

John Reiser noticed that a physical memory region was being mapped twice.

This patch fixes that, and it inlines the responsible function, as that had
only one caller.

Cc: John Reiser <jreiser@BitWagon.com>
Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

TOPDIR is obsolete, use srctree instead.  This patch removes TOPDIR from all
UML Makefiles.

Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The 3-level page table fixes forgot to remove a couple now-unused fields from
struct mm_context.
Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Calling init_registers inside the skas3 checking causes mysterious crashes if
it doesn't happen because the skas3 checking is bypassed.  This patch moves it
to os_early_checks.
Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Some printks were missing newlines.
Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Style fixes in arch/um/sys-x86_64:
	updated copyrights
	CodingStyle fixes
	added severities to printks which needed them

A bunch of functions in sys-*/ptrace_user.c turn out to be unused, so they and
their declarations are gone.
Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>