- 29 Oct, 2014 40 commits
-
-
H Hartley Sweeten authored
Use comedi_buf_write_samples() to add the samples to the async buffer. That function will handle single and multi samples writes by determining the number of bytes to add based on the number of samples and the bytes_per_sample(). Signed-off-by:
H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by:
Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
H Hartley Sweeten authored
Use comedi_buf_write_samples() to add the samples to the async buffer. That function will handle single and multi samples writes by determining the number of bytes to add based on the number of samples and the bytes_per_sample(). Also, remove the unnecessary COMEDI_CB_BLOCK event. comedi_buf_write_samples() will automatically add that event after adding the samples to the async buffer. Signed-off-by:
-
H Hartley Sweeten authored
Use comedi_buf_write_samples() instead of cfc_write_to_buffer() to add all the samples to the async buffer in one operation. The core will add the COMEDI_CB_BLOCK event when data is written to the async buffer. Remove the unnecessary event in the driver. Signed-off-by:
-
H Hartley Sweeten authored
Use comedi_buf_write_samples() instead of cfc_write_to_buffer() to add the single sample to the async buffer. Signed-off-by:
-
H Hartley Sweeten authored
Use comedi_buf_write_samples() instead of cfc_write_to_buffer() to add the single sample to the async buffer. Signed-off-by:
-
H Hartley Sweeten authored
Use comedi_buf_write_samples() instead of cfc_write_to_buffer() to add the single sample to the async buffer. The core will add the COMEDI_CB_BLOCK event when data is written to the async buffer. Remove the unnecessary event in the driver. Signed-off-by:
-
H Hartley Sweeten authored
Use comedi_buf_write_samples() instead of cfc_write_to_buffer() to add the single sample to the async buffer. The core will add the COMEDI_CB_BLOCK event when data is written to the async buffer. Remove the unnecessary event from the driver. Signed-off-by:
-
H Hartley Sweeten authored
Use comedi_buf_write_samples() instead of cfc_write_to_buffer() to add the single sample to the async buffer. Signed-off-by:
-
H Hartley Sweeten authored
The inline function is not used. Remove it. Signed-off-by:
-
H Hartley Sweeten authored
Introduce a generic method to write samples to the async buffer. The number of samples is first checked against the number of samples that would fill the async buffer. The size of each sample is determined using the bytes_per_sample() helper. If all the samples will fit in the async buffer they are written to the buffer using comedi_write_array_to_buffer(). This will allow converting all the comedi drivers to use a common method to write data to the async buffer. Since comedi_write_array_to_buffer() sets the COMEDI_CB_BLOCK event after writing the data, those events can be removed from the drivers. In addition, comedi_inc_scan_progress() will automatically detect the end of scan and set the COMEDI_CB_EOS event. Those events can also be removed from the drivers. Signed-off-by:
-
H Hartley Sweeten authored
This parameter is always passed as '0'. Remove the unnecessary parameter. This allows removing the unnecessary check of the read_ptr overflow. Signed-off-by:
-
H Hartley Sweeten authored
This parameter is always passed as '0'. Remove the unnecessary parameter. This allows removing the unnecessary check of the write_ptr overflow. Signed-off-by:
-
H Hartley Sweeten authored
This function is only used internally. Remove the export. Signed-off-by:
-
H Hartley Sweeten authored
This function is only used internally. Remove the export. Signed-off-by:
-
H Hartley Sweeten authored
This function is no longer used. Remove it. Signed-off-by:
-
H Hartley Sweeten authored
Use comedi_buf_read_samples() to read the analog output samples from the async buffer. That function will set the COMEDI_CB_BLOCK event when samples are read from the async buffer. Signed-off-by:
-
H Hartley Sweeten authored
Use comedi_buf_read_samples() to read the analog output samples from the async buffer. That function will set the COMEDI_CB_BLOCK event when samples are read from the async buffer. Signed-off-by:
-
H Hartley Sweeten authored
Use comedi_buf_read_samples() to read the analog output samples from the async buffer. That function will set the COMEDI_CB_BLOCK event when samples are read from the async buffer. In addition, the core will also handle the end-of-scan detection and set the COMEDI_CB_EOS event. Signed-off-by:
-
H Hartley Sweeten authored
Use comedi_buf_read_samples() to get the single samples from the async buffer. The number of samples in the buffer was validated by the callers so the error checking can be removed. In addition, the core will set the COMEDI_CB_BLOCK event so it can also be removed. Signed-off-by:
-
H Hartley Sweeten authored
A number of drivers currently use comedi_buf_get() to read single samples from the the async buffer. This works but the drivers have to handle the COMEDI_CB_BLOCK and COMEDI_CB_EOS events. Converting those drivers to use comedi_buf_read_samples() moves the handling of those events into the core. Modify comedi_buf_read_samples() so that the async buffer is checked for the number of full samples available. Use that to clamp the number of samples that will be read. This makes sure that only full samples are read from the async buffer making comedi_buf_read_samples() mimic the action of comedi_buf_get() with the added benifit of handling the events. Signed-off-by:
-
H Hartley Sweeten authored
This function is only called by comedi_buf_read_samples(). Absorb it. Signed-off-by:
-
H Hartley Sweeten authored
This function is only used internally. Remove the export. Signed-off-by:
-
H Hartley Sweeten authored
This inline function is no longer used. Remove it. Signed-off-by:
-
H Hartley Sweeten authored
Introduce a helper function to read the analog output samples from the async buffer and prep the DMA. Use comedi_buf_read_samples() to read the analog output samples from the async buffer. Signed-off-by:
-
H Hartley Sweeten authored
Introduce a helper function to read the analog output samples from the async buffer. This fixes a bug in load_ao_dma_buffer(). That function was decrementing the 'ao_count' by the number of bytes, not the number of samples, that were read from the async buffer. Use comedi_buf_read_samples() to read the analog output samples from the async buffer. Signed-off-by:
-
H Hartley Sweeten authored
Introduce a helper function to load the analog output FIFO. This fixes a bug in cb_pcidas_ao_inttrig(). That function was writing 'num_bytes' data values to the FIFO instead of 'num_points'. This results in twice the number of data values getting written to the FIFO. Use comedi_buf_read_samples() read the analog output samples from the async buffer. Signed-off-by:
-
H Hartley Sweeten authored
Use the new generic method to read the analog output samples from the async buffer. Signed-off-by:
-
H Hartley Sweeten authored
Introduce a generic method to read samples from the async buffer. The number of requested samples is clampled to the number of samples that would fill the async buffer. The size of each sample is determined using the bytes_per_sample() helper. The number of bytes need are then read from the async buffer using comedi_read_array_from_buffer(). This will allow converting all the comedi drivers to use a common method to read data from the async buffer. Since comedi_read_array_from_buffer() sets the COMEDI_CB_BLOCK event after reading the data, those events can be removed from the drivers. In addition, comedi_inc_scan_progress() will automatically detect the end of scan and set the COMEDI_CB_EOS event. Those events can also be removed from the drivers. Signed-off-by:
-
H Hartley Sweeten authored
The comedi core calls all the subdevice (*cancel) functions before it does the driver (*detach). There is no reason to call the board reset function in the (*detach). Signed-off-by:
-
H Hartley Sweeten authored
The analog input (*cancel) stops the async command. There is not reason to also call the board reset function. Signed-off-by:
-
H Hartley Sweeten authored
Move the apci3120_reset() call in the (*auto_attach) to ensure that the board is reset before hooking up the interrupt. Signed-off-by:
-
H Hartley Sweeten authored
It appears that this subdevice is actually broken. The subdevice functions all violate the comedi API and, it they did work, it appears they would break the analog input async commands. For now just tidy up the subdevice init. Add the SDF_READABLE subdev_flag, this subdevice provides an (*insn_read). Fix the subdevice 'maxdata' initialization. The timer is 24-bits. Remove the 'len_chanlist' initialization. This member is only used by subdevices that support async commands. Also remove the 'range_table' initialization. The core will set it to range_unknown which is appropriate. Signed-off-by:
-
H Hartley Sweeten authored
For aesthetics, add some white space to the analog input subdevice initialization. The async command support in this driver is pretty messed up. I'm not really sure if it actually works yet. Luckly this driver was not setting the SDF_CMD_READ subdev_flag so the command support was not actually getting enabled. The command support only works if an interrupt is available. Refactor the subdevice init so that the command support is only hooked up if we have an interrupt. For now always disable the command support. Once the driver has been cleaned up the command will be enabled. Signed-off-by:
-
H Hartley Sweeten authored
For aesthetics, add some white space to the digital output subdevice initialization. Remove the subdev_flags SDF_GROUND and SDF_COMMON. These only apply to analog subdevices. Also remove the unnecessary SDF_READABLE subdev_flag. Signed-off-by:
-
H Hartley Sweeten authored
For aesthetics, add some white space to the digital input subdevice initialization. Remove the subdev_flags SDF_GROUND and SDF_COMMON. These only apply to analog subdevices. Signed-off-by:
-
H Hartley Sweeten authored
For aesthetics, add some white space to the analog output subdevice initialization. Signed-off-by:
-
H Hartley Sweeten authored
Use the comedi_subdevice 'readback' member and the core provided (*insn_read) function to provide radback of the analog output channels. Signed-off-by:
-
H Hartley Sweeten authored
The comedi core expects (*insn_write) functions to write insn->n values and return the number of values written or an errno. This function currently returns insn->n but it only writes a single data value. Fix the function to work like the core expects. There are two registers used to update the analog outputs. Offset 0x08 is used to update channels 0-3 and offset 0x0a to update channels 4-7. Bits 14 and 15 in each register set the mux to select which channel to update. The lower 14 bits are the value used to set the DAC. For aesthetics, tidy up the defines used for the register offsets and bits in the registers. Signed-off-by:
-
H Hartley Sweeten authored
The apci3120_reset() function is called at the end of the (*auto_attach) and with the (*detach) is called to unload the driver. Part of this function resets all the analog output channels to 0V. There are two problems with this. 1) Only the APCI-3120 has analog outputs, the APCI-3001 does not. 2) The DA_READY bit in the status register needs to be checked before each write to update the analog outputs. It's unknown what the DA_READY bit does on the APCI-3001 board. Just remove the analog output reset to avoid any problems. Also, remove the unnecessary udelay() in apci3120_reset(). Signed-off-by:
-
H Hartley Sweeten authored
The DA_READY bit (0x0001) in the status register needs to be set before the analog outputs can be updated. Use comedi_timeout() to prevent a deadlock condition while waiting for the DA_READY bit to get set. Signed-off-by:
-
