- 25 Apr, 2024 12 commits
-
-
Duanqiang Wen authored
This reverts commit c644920c. when register i2c dev, txgbe shorten "i2c_designware" to "i2c_dw", will cause this i2c dev can't match platfom driver i2c_designware_platform. Signed-off-by:
Duanqiang Wen <duanqiangwen@net-swift.com> Reviewed-by:
Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20240422084109.3201-1-duanqiangwen@net-swift.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Petr Machata says: ==================== mlxsw: Various ACL fixes Ido Schimmel writes: Fix various problems in the ACL (i.e., flower offload) code. See the commit messages for more details. ==================== Link: https://lore.kernel.org/r/cover.1713797103.git.petrm@nvidia.comSigned-off-by:
-
Ido Schimmel authored
The rehash delayed work is rescheduled with a delay if the number of credits at end of the work is not negative as supposedly it means that the migration ended. Otherwise, it is rescheduled immediately. After "mlxsw: spectrum_acl_tcam: Fix possible use-after-free during rehash" the above is no longer accurate as a non-negative number of credits is no longer indicative of the migration being done. It can also happen if the work encountered an error in which case the migration will resume the next time the work is scheduled. The significance of the above is that it is possible for the work to be pending and associated with hints that were allocated when the migration started. This leads to the hints being leaked [1] when the work is canceled while pending as part of ACL region dismantle. Fix by freeing the hints if hints are associated with a work that was canceled while pending. Blame the original commit since the reliance on not having a pending work associated with hints is fragile. [1] unreferenced object 0xffff88810e7c3000 (size 256): comm "kworker/0:16", pid 176, jiffies 4295460353 hex dump (first 32 bytes): 00 30 95 11 81 88 ff ff 61 00 00 00 00 00 00 80 .0......a....... 00 00 61 00 40 00 00 00 00 00 00 00 04 00 00 00 ..a.@........... backtrace (crc 2544ddb9): [<00000000cf8cfab3>] kmalloc_trace+0x23f/0x2a0 [<000000004d9a1ad9>] objagg_hints_get+0x42/0x390 [<000000000b143cf3>] mlxsw_sp_acl_erp_rehash_hints_get+0xca/0x400 [<0000000059bdb60a>] mlxsw_sp_acl_tcam_vregion_rehash_work+0x868/0x1160 [<00000000e81fd734>] process_one_work+0x59c/0xf20 [<00000000ceee9e81>] worker_thread+0x799/0x12c0 [<00000000bda6fe39>] kthread+0x246/0x300 [<0000000070056d23>] ret_from_fork+0x34/0x70 [<00000000dea2b93e>] ret_from_fork_asm+0x1a/0x30 Fixes: c9c9af91 ("mlxsw: spectrum_acl: Allow to interrupt/continue rehash work") Signed-off-by:Ido Schimmel <idosch@nvidia.com> Tested-by:
Alexander Zubkov <green@qrator.net> Signed-off-by:
Petr Machata <petrm@nvidia.com> Reviewed-by:
Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/0cc12ebb07c4d4c41a1265ee2c28b392ff997a86.1713797103.git.petrm@nvidia.comSigned-off-by:
-
Ido Schimmel authored
Both the function that migrates all the chunks within a region and the function that migrates all the entries within a chunk call list_first_entry() on the respective lists without checking that the lists are not empty. This is incorrect usage of the API, which leads to the following warning [1]. Fix by returning if the lists are empty as there is nothing to migrate in this case. [1] WARNING: CPU: 0 PID: 6437 at drivers/net/ethernet/mellanox/mlxsw/spectrum_acl_tcam.c:1266 mlxsw_sp_acl_tcam_vchunk_migrate_all+0x1f1/0> Modules linked in: CPU: 0 PID: 6437 Comm: kworker/0:37 Not tainted 6.9.0-rc3-custom-00883-g94a65f079ef6 #39 Hardware name: Mellanox Technologies Ltd. MSN3700/VMOD0005, BIOS 5.11 01/06/2019 Workqueue: mlxsw_core mlxsw_sp_acl_tcam_vregion_rehash_work RIP: 0010:mlxsw_sp_acl_tcam_vchunk_migrate_all+0x1f1/0x2c0 [...] Call Trace: <TASK> mlxsw_sp_acl_tcam_vregion_rehash_work+0x6c/0x4a0 process_one_work+0x151/0x370 worker_thread+0x2cb/0x3e0 kthread+0xd0/0x100 ret_from_fork+0x34/0x50 ret_from_fork_asm+0x1a/0x30 </TASK> Fixes: 6f9579d4 ("mlxsw: spectrum_acl: Remember where to continue rehash migration") Signed-off-by:
-
Ido Schimmel authored
As previously explained, the rehash delayed work migrates filters from one region to another. This is done by iterating over all chunks (all the filters with the same priority) in the region and in each chunk iterating over all the filters. When the work runs out of credits it stores the current chunk and entry as markers in the per-work context so that it would know where to resume the migration from the next time the work is scheduled. Upon error, the chunk marker is reset to NULL, but without resetting the entry markers despite being relative to it. This can result in migration being resumed from an entry that does not belong to the chunk being migrated. In turn, this will eventually lead to a chunk being iterated over as if it is an entry. Because of how the two structures happen to be defined, this does not lead to KASAN splats, but to warnings such as [1]. Fix by creating a helper that resets all the markers and call it from all the places the currently only reset the chunk marker. For good measures also call it when starting a completely new rehash. Add a warning to avoid future cases. [1] WARNING: CPU: 7 PID: 1076 at drivers/net/ethernet/mellanox/mlxsw/core_acl_flex_keys.c:407 mlxsw_afk_encode+0x242/0x2f0 Modules linked in: CPU: 7 PID: 1076 Comm: kworker/7:24 Tainted: G W 6.9.0-rc3-custom-00880-g29e61d91b77b #29 Hardware name: Mellanox Technologies Ltd. MSN3700/VMOD0005, BIOS 5.11 01/06/2019 Workqueue: mlxsw_core mlxsw_sp_acl_tcam_vregion_rehash_work RIP: 0010:mlxsw_afk_encode+0x242/0x2f0 [...] Call Trace: <TASK> mlxsw_sp_acl_atcam_entry_add+0xd9/0x3c0 mlxsw_sp_acl_tcam_entry_create+0x5e/0xa0 mlxsw_sp_acl_tcam_vchunk_migrate_all+0x109/0x290 mlxsw_sp_acl_tcam_vregion_rehash_work+0x6c/0x470 process_one_work+0x151/0x370 worker_thread+0x2cb/0x3e0 kthread+0xd0/0x100 ret_from_fork+0x34/0x50 </TASK> Fixes: 6f9579d4 ("mlxsw: spectrum_acl: Remember where to continue rehash migration") Signed-off-by:
-
Ido Schimmel authored
The rehash delayed work migrates filters from one region to another. This is done by iterating over all chunks (all the filters with the same priority) in the region and in each chunk iterating over all the filters. If the migration fails, the code tries to migrate the filters back to the old region. However, the rollback itself can also fail in which case another migration will be erroneously performed. Besides the fact that this ping pong is not a very good idea, it also creates a problem. Each virtual chunk references two chunks: The currently used one ('vchunk->chunk') and a backup ('vchunk->chunk2'). During migration the first holds the chunk we want to migrate filters to and the second holds the chunk we are migrating filters from. The code currently assumes - but does not verify - that the backup chunk does not exist (NULL) if the currently used chunk does not reference the target region. This assumption breaks when we are trying to rollback a rollback, resulting in the backup chunk being overwritten and leaked [1]. Fix by not rolling back a failed rollback and add a warning to avoid future cases. [1] WARNING: CPU: 5 PID: 1063 at lib/parman.c:291 parman_destroy+0x17/0x20 Modules linked in: CPU: 5 PID: 1063 Comm: kworker/5:11 Tainted: G W 6.9.0-rc2-custom-00784-gc6a05c468a0b #14 Hardware name: Mellanox Technologies Ltd. MSN3700/VMOD0005, BIOS 5.11 01/06/2019 Workqueue: mlxsw_core mlxsw_sp_acl_tcam_vregion_rehash_work RIP: 0010:parman_destroy+0x17/0x20 [...] Call Trace: <TASK> mlxsw_sp_acl_atcam_region_fini+0x19/0x60 mlxsw_sp_acl_tcam_region_destroy+0x49/0xf0 mlxsw_sp_acl_tcam_vregion_rehash_work+0x1f1/0x470 process_one_work+0x151/0x370 worker_thread+0x2cb/0x3e0 kthread+0xd0/0x100 ret_from_fork+0x34/0x50 ret_from_fork_asm+0x1a/0x30 </TASK> Fixes: 84350051 ("mlxsw: spectrum_acl: Do rollback as another call to mlxsw_sp_acl_tcam_vchunk_migrate_all()") Signed-off-by: -
Ido Schimmel authored
In the rare cases when the device resources are exhausted it is likely that the rehash delayed work will fail. An error message will be printed whenever this happens which can be overwhelming considering the fact that the work is per-region and that there can be hundreds of regions. Fix by rate limiting the error message. Fixes: e5e7962e ("mlxsw: spectrum_acl: Implement region migration according to hints") Signed-off-by:
-
Ido Schimmel authored
The rehash delayed work migrates filters from one region to another according to the number of available credits. The migrated from region is destroyed at the end of the work if the number of credits is non-negative as the assumption is that this is indicative of migration being complete. This assumption is incorrect as a non-negative number of credits can also be the result of a failed migration. The destruction of a region that still has filters referencing it can result in a use-after-free [1]. Fix by not destroying the region if migration failed. [1] BUG: KASAN: slab-use-after-free in mlxsw_sp_acl_ctcam_region_entry_remove+0x21d/0x230 Read of size 8 at addr ffff8881735319e8 by task kworker/0:31/3858 CPU: 0 PID: 3858 Comm: kworker/0:31 Tainted: G W 6.9.0-rc2-custom-00782-gf2275c2157d8 #5 Hardware name: Mellanox Technologies Ltd. MSN3700/VMOD0005, BIOS 5.11 01/06/2019 Workqueue: mlxsw_core mlxsw_sp_acl_tcam_vregion_rehash_work Call Trace: <TASK> dump_stack_lvl+0xc6/0x120 print_report+0xce/0x670 kasan_report+0xd7/0x110 mlxsw_sp_acl_ctcam_region_entry_remove+0x21d/0x230 mlxsw_sp_acl_ctcam_entry_del+0x2e/0x70 mlxsw_sp_acl_atcam_entry_del+0x81/0x210 mlxsw_sp_acl_tcam_vchunk_migrate_all+0x3cd/0xb50 mlxsw_sp_acl_tcam_vregion_rehash_work+0x157/0x1300 process_one_work+0x8eb/0x19b0 worker_thread+0x6c9/0xf70 kthread+0x2c9/0x3b0 ret_from_fork+0x4d/0x80 ret_from_fork_asm+0x1a/0x30 </TASK> Allocated by task 174: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 __kasan_kmalloc+0x8f/0xa0 __kmalloc+0x19c/0x360 mlxsw_sp_acl_tcam_region_create+0xdf/0x9c0 mlxsw_sp_acl_tcam_vregion_rehash_work+0x954/0x1300 process_one_work+0x8eb/0x19b0 worker_thread+0x6c9/0xf70 kthread+0x2c9/0x3b0 ret_from_fork+0x4d/0x80 ret_from_fork_asm+0x1a/0x30 Freed by task 7: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x60 poison_slab_object+0x102/0x170 __kasan_slab_free+0x14/0x30 kfree+0xc1/0x290 mlxsw_sp_acl_tcam_region_destroy+0x272/0x310 mlxsw_sp_acl_tcam_vregion_rehash_work+0x731/0x1300 process_one_work+0x8eb/0x19b0 worker_thread+0x6c9/0xf70 kthread+0x2c9/0x3b0 ret_from_fork+0x4d/0x80 ret_from_fork_asm+0x1a/0x30 Fixes: c9c9af91 ("mlxsw: spectrum_acl: Allow to interrupt/continue rehash work") Signed-off-by:
-
Ido Schimmel authored
The rule activity update delayed work periodically traverses the list of configured rules and queries their activity from the device. As part of this task it accesses the entry pointed by 'ventry->entry', but this entry can be changed concurrently by the rehash delayed work, leading to a use-after-free [1]. Fix by closing the race and perform the activity query under the 'vregion->lock' mutex. [1] BUG: KASAN: slab-use-after-free in mlxsw_sp_acl_tcam_flower_rule_activity_get+0x121/0x140 Read of size 8 at addr ffff8881054ed808 by task kworker/0:18/181 CPU: 0 PID: 181 Comm: kworker/0:18 Not tainted 6.9.0-rc2-custom-00781-gd5ab772d32f7 #2 Hardware name: Mellanox Technologies Ltd. MSN3700/VMOD0005, BIOS 5.11 01/06/2019 Workqueue: mlxsw_core mlxsw_sp_acl_rule_activity_update_work Call Trace: <TASK> dump_stack_lvl+0xc6/0x120 print_report+0xce/0x670 kasan_report+0xd7/0x110 mlxsw_sp_acl_tcam_flower_rule_activity_get+0x121/0x140 mlxsw_sp_acl_rule_activity_update_work+0x219/0x400 process_one_work+0x8eb/0x19b0 worker_thread+0x6c9/0xf70 kthread+0x2c9/0x3b0 ret_from_fork+0x4d/0x80 ret_from_fork_asm+0x1a/0x30 </TASK> Allocated by task 1039: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 __kasan_kmalloc+0x8f/0xa0 __kmalloc+0x19c/0x360 mlxsw_sp_acl_tcam_entry_create+0x7b/0x1f0 mlxsw_sp_acl_tcam_vchunk_migrate_all+0x30d/0xb50 mlxsw_sp_acl_tcam_vregion_rehash_work+0x157/0x1300 process_one_work+0x8eb/0x19b0 worker_thread+0x6c9/0xf70 kthread+0x2c9/0x3b0 ret_from_fork+0x4d/0x80 ret_from_fork_asm+0x1a/0x30 Freed by task 1039: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x60 poison_slab_object+0x102/0x170 __kasan_slab_free+0x14/0x30 kfree+0xc1/0x290 mlxsw_sp_acl_tcam_vchunk_migrate_all+0x3d7/0xb50 mlxsw_sp_acl_tcam_vregion_rehash_work+0x157/0x1300 process_one_work+0x8eb/0x19b0 worker_thread+0x6c9/0xf70 kthread+0x2c9/0x3b0 ret_from_fork+0x4d/0x80 ret_from_fork_asm+0x1a/0x30 Fixes: 2bffc532 ("mlxsw: spectrum_acl: Don't take mutex in mlxsw_sp_acl_tcam_vregion_rehash_work()") Signed-off-by:
-
Ido Schimmel authored
The purpose of the rehash delayed work is to reduce the number of masks (eRPs) used by an ACL region as the eRP bank is a global and limited resource. This is done in three steps: 1. Creating a new set of masks and a new ACL region which will use the new masks and to which the existing filters will be migrated to. The new region is assigned to 'vregion->region' and the region from which the filters are migrated from is assigned to 'vregion->region2'. 2. Migrating all the filters from the old region to the new region. 3. Destroying the old region and setting 'vregion->region2' to NULL. Only the second steps is performed under the 'vregion->lock' mutex although its comments says that among other things it "Protects consistency of region, region2 pointers". This is problematic as the first step can race with filter insertion from user space that uses 'vregion->region', but under the mutex. Fix by holding the mutex across the entirety of the delayed work and not only during the second step. Fixes: 2bffc532 ("mlxsw: spectrum_acl: Don't take mutex in mlxsw_sp_acl_tcam_vregion_rehash_work()") Signed-off-by:
-
Ido Schimmel authored
Region identifiers can be allocated both when user space tries to insert a new tc filter and when filters are migrated from one region to another as part of the rehash delayed work. There is no lock protecting the bitmap from which these identifiers are allocated from, which is racy and leads to bad parameter errors from the device's firmware. Fix by converting the bitmap to IDA which handles its own locking. For consistency, do the same for the group identifiers that are part of the same structure. Fixes: 2bffc532 ("mlxsw: spectrum_acl: Don't take mutex in mlxsw_sp_acl_tcam_vregion_rehash_work()") Reported-by:
Amit Cohen <amcohen@nvidia.com> Signed-off-by:
-
Hyunwoo Kim authored
Since kfree_rcu, which is called in the hlist_for_each_entry_rcu traversal of ovs_ct_limit_exit, is not part of the RCU read critical section, it is possible that the RCU grace period will pass during the traversal and the key will be free. To prevent this, it should be changed to hlist_for_each_entry_safe. Fixes: 11efd5cb ("openvswitch: Support conntrack zone limit") Signed-off-by:
Hyunwoo Kim <v4bel@theori.io> Reviewed-by:
Eric Dumazet <edumazet@google.com> Reviewed-by:
Aaron Conole <aconole@redhat.com> Link: https://lore.kernel.org/r/ZiYvzQN/Ry5oeFQW@v4bel-B760M-AORUS-ELITE-AXSigned-off-by:
-
- 24 Apr, 2024 6 commits
-
-
Daniel Golle authored
Only blink if the link is up on a LED which is programmed to also indicate link-status. Otherwise, if both LEDs are in use to indicate different speeds, the resulting blinking being inverted on LEDs which aren't switched on at a specific speed is quite counter-intuitive. Also make sure that state left behind by reset or the bootloader is recognized correctly including the half-duplex and full-duplex bits as well as the (unsupported by Linux netdev trigger semantics) link-down bit. Fixes: c66937b0 ("net: phy: mediatek-ge-soc: support PHY LEDs") Signed-off-by:
Daniel Golle <daniel@makrotopia.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Hyunwoo Kim authored
Since call_rcu, which is called in the hlist_for_each_entry_rcu traversal of gtp_dellink, is not part of the RCU read critical section, it is possible that the RCU grace period will pass during the traversal and the key will be free. To prevent this, it should be changed to hlist_for_each_entry_safe. Fixes: 94dc550a ("gtp: fix an use-after-free in ipv4_pdp_find()") Signed-off-by:
-
Hyunwoo Kim authored
Since call_rcu, which is called in the hlist_for_each_entry_rcu traversal of tcp_ao_connect_init, is not part of the RCU read critical section, it is possible that the RCU grace period will pass during the traversal and the key will be free. To prevent this, it should be changed to hlist_for_each_entry_safe. Fixes: 7c2ffaf2 ("net/tcp: Calculate TCP-AO traffic keys") Signed-off-by:
Dmitry Safonov <0x7f454c46@gmail.com> Link: https://lore.kernel.org/r/ZiYu9NJ/ClR8uSkH@v4bel-B760M-AORUS-ELITE-AXSigned-off-by:
-
Eric Dumazet authored
Some usb drivers try to set small skb->truesize and break core networking stacks. In this patch, I removed one of the skb->truesize overide. I also replaced one skb_clone() by an allocation of a fresh and small skb, to get minimally sized skbs, like we did in commit 1e2c6117 ("net: cdc_ncm: reduce skb truesize in rx path") Fixes: f8ebb3ac ("net: usb: ax88179_178a: Fix packet receiving") Reported-by:
shironeko <shironeko@tesaguri.club> Closes: https://lore.kernel.org/netdev/c110f41a0d2776b525930f213ca9715c@tesaguri.club/Signed-off-by:
-
Eric Dumazet authored
syzbot was able to trigger a NULL deref in fib_validate_source() in an old tree [1]. It appears the bug exists in latest trees. All calls to __in_dev_get_rcu() must be checked for a NULL result. [1] general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 2 PID: 3257 Comm: syz-executor.3 Not tainted 5.10.0-syzkaller #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 RIP: 0010:fib_validate_source+0xbf/0x15a0 net/ipv4/fib_frontend.c:425 Code: 18 f2 f2 f2 f2 42 c7 44 20 23 f3 f3 f3 f3 48 89 44 24 78 42 c6 44 20 27 f3 e8 5d 88 48 fc 4c 89 e8 48 c1 e8 03 48 89 44 24 18 <42> 80 3c 20 00 74 08 4c 89 ef e8 d2 15 98 fc 48 89 5c 24 10 41 bf RSP: 0018:ffffc900015fee40 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff88800f7a4000 RCX: ffff88800f4f90c0 RDX: 0000000000000000 RSI: 0000000004001eac RDI: ffff8880160c64c0 RBP: ffffc900015ff060 R08: 0000000000000000 R09: ffff88800f7a4000 R10: 0000000000000002 R11: ffff88800f4f90c0 R12: dffffc0000000000 R13: 0000000000000000 R14: 0000000000000000 R15: ffff88800f7a4000 FS: 00007f938acfe6c0(0000) GS:ffff888058c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f938acddd58 CR3: 000000001248e000 CR4: 0000000000352ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ip_route_use_hint+0x410/0x9b0 net/ipv4/route.c:2231 ip_rcv_finish_core+0x2c4/0x1a30 net/ipv4/ip_input.c:327 ip_list_rcv_finish net/ipv4/ip_input.c:612 [inline] ip_sublist_rcv+0x3ed/0xe50 net/ipv4/ip_input.c:638 ip_list_rcv+0x422/0x470 net/ipv4/ip_input.c:673 __netif_receive_skb_list_ptype net/core/dev.c:5572 [inline] __netif_receive_skb_list_core+0x6b1/0x890 net/core/dev.c:5620 __netif_receive_skb_list net/core/dev.c:5672 [inline] netif_receive_skb_list_internal+0x9f9/0xdc0 net/core/dev.c:5764 netif_receive_skb_list+0x55/0x3e0 net/core/dev.c:5816 xdp_recv_frames net/bpf/test_run.c:257 [inline] xdp_test_run_batch net/bpf/test_run.c:335 [inline] bpf_test_run_xdp_live+0x1818/0x1d00 net/bpf/test_run.c:363 bpf_prog_test_run_xdp+0x81f/0x1170 net/bpf/test_run.c:1376 bpf_prog_test_run+0x349/0x3c0 kernel/bpf/syscall.c:3736 __sys_bpf+0x45c/0x710 kernel/bpf/syscall.c:5115 __do_sys_bpf kernel/bpf/syscall.c:5201 [inline] __se_sys_bpf kernel/bpf/syscall.c:5199 [inline] __x64_sys_bpf+0x7c/0x90 kernel/bpf/syscall.c:5199 Fixes: 02b24941 ("ipv4: use dst hint for ipv4 list receive") Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Link: https://lore.kernel.org/r/20240421184326.1704930-1-edumazet@google.comSigned-off-by:
-
Eric Dumazet authored
Jonathan Heathcote reported a regression caused by blamed commit on aarch64 architecture. x86 happens to have irq-safe __this_cpu_add_return() and __this_cpu_sub(), but this is not generic. I think my confusion came from "struct sock" argument, because these helpers are called with a locked socket. But the memory accounting is per-proto (and per-cpu after the blamed commit). We might cleanup these helpers later to directly accept a "struct proto *proto" argument. Switch to this_cpu_add_return() and this_cpu_xchg() operations, and get rid of preempt_disable()/preempt_enable() pairs. Fast path becomes a bit faster as a result :) Many thanks to Jonathan Heathcote for his awesome report and investigations. Fixes: 3cd3399d ("net: implement per-cpu reserves for memory_allocated") Reported-by:
Jonathan Heathcote <jonathan.heathcote@bbc.co.uk> Closes: https://lore.kernel.org/netdev/VI1PR01MB42407D7947B2EA448F1E04EFD10D2@VI1PR01MB4240.eurprd01.prod.exchangelabs.com/Signed-off-by:
Soheil Hassas Yeganeh <soheil@google.com> Reviewed-by:
Shakeel Butt <shakeel.butt@linux.dev> Link: https://lore.kernel.org/r/20240421175248.1692552-1-edumazet@google.comSigned-off-by:
-
- 23 Apr, 2024 2 commits
-
-
Jakub Kicinski authored
NLMSG_DONE contains an error code, it has to be extracted. Prior to this change all dumps will end in success, and in case of failure the result is silently truncated. Fixes: e4b48ed4 ("tools: ynl: add a completely generic client") Signed-off-by:
Donald Hunter <donald.hunter@gmail.com> Link: https://lore.kernel.org/r/20240420020827.3288615-1-kuba@kernel.orgSigned-off-by:
-
Duoming Zhou authored
The dev_tracker is added to ax25_cb in ax25_bind(). When the ax25 device is detaching, the dev_tracker of ax25_cb should be deallocated in ax25_kill_by_device() instead of the dev_tracker of ax25_dev. The log reported by ref_tracker is shown below: [ 80.884935] ref_tracker: reference already released. [ 80.885150] ref_tracker: allocated in: [ 80.885349] ax25_dev_device_up+0x105/0x540 [ 80.885730] ax25_device_event+0xa4/0x420 [ 80.885730] notifier_call_chain+0xc9/0x1e0 [ 80.885730] __dev_notify_flags+0x138/0x280 [ 80.885730] dev_change_flags+0xd7/0x180 [ 80.885730] dev_ifsioc+0x6a9/0xa30 [ 80.885730] dev_ioctl+0x4d8/0xd90 [ 80.885730] sock_do_ioctl+0x1c2/0x2d0 [ 80.885730] sock_ioctl+0x38b/0x4f0 [ 80.885730] __se_sys_ioctl+0xad/0xf0 [ 80.885730] do_syscall_64+0xc4/0x1b0 [ 80.885730] entry_SYSCALL_64_after_hwframe+0x67/0x6f [ 80.885730] ref_tracker: freed in: [ 80.885730] ax25_device_event+0x272/0x420 [ 80.885730] notifier_call_chain+0xc9/0x1e0 [ 80.885730] dev_close_many+0x272/0x370 [ 80.885730] unregister_netdevice_many_notify+0x3b5/0x1180 [ 80.885730] unregister_netdev+0xcf/0x120 [ 80.885730] sixpack_close+0x11f/0x1b0 [ 80.885730] tty_ldisc_kill+0xcb/0x190 [ 80.885730] tty_ldisc_hangup+0x338/0x3d0 [ 80.885730] __tty_hangup+0x504/0x740 [ 80.885730] tty_release+0x46e/0xd80 [ 80.885730] __fput+0x37f/0x770 [ 80.885730] __x64_sys_close+0x7b/0xb0 [ 80.885730] do_syscall_64+0xc4/0x1b0 [ 80.885730] entry_SYSCALL_64_after_hwframe+0x67/0x6f [ 80.893739] ------------[ cut here ]------------ [ 80.894030] WARNING: CPU: 2 PID: 140 at lib/ref_tracker.c:255 ref_tracker_free+0x47b/0x6b0 [ 80.894297] Modules linked in: [ 80.894929] CPU: 2 PID: 140 Comm: ax25_conn_rel_6 Not tainted 6.9.0-rc4-g8cd26fd9 #11 [ 80.895190] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qem4 [ 80.895514] RIP: 0010:ref_tracker_free+0x47b/0x6b0 [ 80.895808] Code: 83 c5 18 4c 89 eb 48 c1 eb 03 8a 04 13 84 c0 0f 85 df 01 00 00 41 83 7d 00 00 75 4b 4c 89 ff 9 [ 80.896171] RSP: 0018:ffff888009edf8c0 EFLAGS: 00000286 [ 80.896339] RAX: 1ffff1100141ac00 RBX: 1ffff1100149463b RCX: dffffc0000000000 [ 80.896502] RDX: 0000000000000001 RSI: 0000000000000246 RDI: ffff88800a0d6518 [ 80.896925] RBP: ffff888009edf9b0 R08: ffff88806d3288d3 R09: 1ffff1100da6511a [ 80.897212] R10: dffffc0000000000 R11: ffffed100da6511b R12: ffff88800a4a31d4 [ 80.897859] R13: ffff88800a4a31d8 R14: dffffc0000000000 R15: ffff88800a0d6518 [ 80.898279] FS: 00007fd88b7fe700(0000) GS:ffff88806d300000(0000) knlGS:0000000000000000 [ 80.899436] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 80.900181] CR2: 00007fd88c001d48 CR3: 000000000993e000 CR4: 00000000000006f0 ... [ 80.935774] ref_tracker: sp%d@000000000bb9df3d has 1/1 users at [ 80.935774] ax25_bind+0x424/0x4e0 [ 80.935774] __sys_bind+0x1d9/0x270 [ 80.935774] __x64_sys_bind+0x75/0x80 [ 80.935774] do_syscall_64+0xc4/0x1b0 [ 80.935774] entry_SYSCALL_64_after_hwframe+0x67/0x6f Change ax25_dev->dev_tracker to the dev_tracker of ax25_cb in order to mitigate the bug. Fixes: feef318c ("ax25: fix UAF bugs of net_device caused by rebinding operation") Signed-off-by:
Duoming Zhou <duoming@zju.edu.cn> Link: https://lore.kernel.org/r/20240419020456.29826-1-duoming@zju.edu.cnSigned-off-by:
-
- 22 Apr, 2024 11 commits
-
-
Paul Geurts authored
During module probe, regulator 'vin' and 'vdd-io' are used and enabled, but the vdd-io regulator overwrites the 'vin' regulator pointer. During remove, only the vdd-io is disabled, as the vin regulator pointer is not available anymore. When regulator_put() is called during resource cleanup a kernel warning is given, as the regulator is still enabled. Store the two regulators in separate pointers and disable both the regulators on module remove. Fixes: 49d22c70 ("NFC: trf7970a: Add device tree option of 1.8 Volt IO voltage") Signed-off-by:
Paul Geurts <paul_geurts@live.nl> Reviewed-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/DB7PR09MB26847A4EBF88D9EDFEB1DA0F950E2@DB7PR09MB2684.eurprd09.prod.outlook.comSigned-off-by:
-
David Christensen authored
Current maintainer Douglas Miller has left IBM and no replacement has been assigned for the driver. The eHEA hardware was last used on IBM POWER7 systems, the last of which reached end-of-support at the end of 2020. Signed-off-by:
David Christensen <drc@linux.ibm.com> Reviewed-by:
Pradeep Satyanarayana <pradeeps@linux.ibm.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Link: https://lore.kernel.org/r/20240418195517.528577-1-drc@linux.ibm.comSigned-off-by:
-
Matthias Schiffer authored
With the recent PHYLINK changes requiring supported_interfaces to be set, MV88E6250 family switches like the 88E6020 fail to probe - cmode is never initialized on these devices, so mv88e6250_phylink_get_caps() does not set any supported_interfaces flags. Instead of a cmode, on 88E6250 we have a read-only port mode value that encodes similar information. There is no reason to bother mapping port mode to the cmodes of other switch models; instead we introduce a mv88e6250_setup_supported_interfaces() that is called directly from mv88e6250_phylink_get_caps(). Fixes: de5c9bf4 ("net: phylink: require supported_interfaces to be filled") Signed-off-by:
Matthias Schiffer <matthias.schiffer@ew.tq-group.com> Link: https://lore.kernel.org/r/20240417103737.166651-1-matthias.schiffer@ew.tq-group.comSigned-off-by:
-
David S. Miller authored
Michael Chan says: ==================== bnxt_en: AER fixes This patchset fixes issues in the AER recovery logic. The first patch refactors the code to make a shutdown function available for AER fatal errors. The second patch fixes the AER fatal recovery logic. The third patch fixes the health register logic to fix AER recovery failure for the new P7 chips. ==================== Signed-off-by:Arınç ÜNAL <arinc.unal@arinc9.com>
-
Michael Chan authored
During error recovery, such as AER fatal error slot reset, we call bnxt_try_map_fw_health_reg() to try to get access to the health register to determine the firmware state. Fix bnxt_try_map_fw_health_reg() to recognize the P7 chip correctly and set up the health register. This fixes this type of AER slot reset failure: bnxt_en 0000:04:00.0: AER: PCIe Bus Error: severity=Uncorrectable (Fatal), type=Inaccessible, (Unregistered Agent ID) bnxt_en 0000:04:00.0 enp4s0f0np0: PCI I/O error detected bnxt_en 0000:04:00.0 bnxt_re0: Handle device suspend call bnxt_en 0000:04:00.1 enp4s0f1np1: PCI I/O error detected bnxt_en 0000:04:00.1 bnxt_re1: Handle device suspend call pcieport 0000:00:02.0: AER: Root Port link has been reset (0) bnxt_en 0000:04:00.0 enp4s0f0np0: PCI Slot Reset bnxt_en 0000:04:00.0: enabling device (0000 -> 0002) bnxt_en 0000:04:00.0: Firmware not ready bnxt_en 0000:04:00.1 enp4s0f1np1: PCI Slot Reset bnxt_en 0000:04:00.1: enabling device (0000 -> 0002) bnxt_en 0000:04:00.1: Firmware not ready pcieport 0000:00:02.0: AER: device recovery failed Fixes: a432a45b ("bnxt_en: Define basic P7 macros") Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
-
Vikas Gupta authored
We do not support two simultaneous recoveries so check for reset flag, BNXT_STATE_IN_FW_RESET, and do not proceed with AER further. When the pci channel state is pci_channel_io_frozen, the PCIe link can not be trusted so we disable the traffic immediately and stop BAR access by calling bnxt_fw_fatal_close(). BAR access after AER fatal error can cause an NMI. Fixes: f75d9a0a ("bnxt_en: Re-write PCI BARs after PCI fatal error.") Signed-off-by:
Vikas Gupta <vikas.gupta@broadcom.com> Signed-off-by:
-
Vikas Gupta authored
Introduce bnxt_fw_fatal_close() API which can be used to stop data path and disable device when firmware is in fatal state. Signed-off-by:
-
Hangbin Liu authored
br_info_notify is a void function. There is no need to return. Fixes: b6d0425b ("bridge: cfm: Netlink Notifications.") Signed-off-by:
Hangbin Liu <liuhangbin@gmail.com> Acked-by:
Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by:
-
Alex Elder authored
Define my kernel.org address to be the canonical one, and add mailmap entries for the various addresses (including typos) that have been used over the years. Signed-off-by:
Alex Elder <elder@linaro.org> Signed-off-by:
-
Eric Dumazet authored
First problem is a double call to __in_dev_get_rcu(), because the second one could return NULL. if (__in_dev_get_rcu(dev) && __in_dev_get_rcu(dev)->ifa_list) Second problem is a read from dev->ip6_ptr with no NULL check: if (!list_empty(&rcu_dereference(dev->ip6_ptr)->addr_list)) Use the correct RCU API to fix these. v2: add missing include <net/addrconf.h> Fixes: d329ea5b ("icmp: add response to RFC 8335 PROBE messages") Signed-off-by:
David Ahern <dsahern@kernel.org> Signed-off-by:
-
Daniele Palmas authored
Add the following Telit FN920C04 compositions: 0x10a0: rmnet + tty (AT/NMEA) + tty (AT) + tty (diag) T: Bus=03 Lev=01 Prnt=03 Port=06 Cnt=01 Dev#= 5 Spd=480 MxCh= 0 D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10a0 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FN920 S: SerialNumber=92c4c4d8 C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms 0x10a4: rmnet + tty (AT) + tty (AT) + tty (diag) T: Bus=03 Lev=01 Prnt=03 Port=06 Cnt=01 Dev#= 8 Spd=480 MxCh= 0 D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10a4 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FN920 S: SerialNumber=92c4c4d8 C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms 0x10a9: rmnet + tty (AT) + tty (diag) + DPL (data packet logging) + adb T: Bus=03 Lev=01 Prnt=03 Port=06 Cnt=01 Dev#= 9 Spd=480 MxCh= 0 D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10a9 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FN920 S: SerialNumber=92c4c4d8 C: #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none) E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by:
Daniele Palmas <dnlplm@gmail.com> Signed-off-by:
-
- 20 Apr, 2024 6 commits
-
-
Jakub Kicinski authored
Petr Machata says: ==================== mlxsw: Fixes This patchset fixes the following issues: - During driver de-initialization the driver unregisters the EMAD response trap by setting its action to DISCARD. However the manual only permits TRAP and FORWARD, and future firmware versions will enforce this. In patch #1, suppress the error message by aligning the driver to the manual and use a FORWARD (NOP) action when unregistering the trap. - The driver queries the Management Capabilities Mask (MCAM) register during initialization to understand if certain features are supported. However, not all firmware versions support this register, leading to the driver failing to load. Patches #2 and #3 fix this issue by treating an error in the register query as an indication that the feature is not supported. v2: - Patch #2: - Make mlxsw_env_max_module_eeprom_len_query() void ==================== Link: https://lore.kernel.org/r/cover.1713446092.git.petrm@nvidia.comSigned-off-by: -
Ido Schimmel authored
The driver queries the Management Capabilities Mask (MCAM) register during initialization to understand if a new and deeper reset flow is supported. However, not all firmware versions support this register, leading to the driver failing to load. Fix by treating an error in the register query as an indication that the feature is not supported. Fixes: f257c73e ("mlxsw: pci: Add support for new reset flow") Reported-by:
Tim 'mithro' Ansell <me@mith.ro> Signed-off-by:
Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by:
-
Ido Schimmel authored
The driver queries the Management Capabilities Mask (MCAM) register during initialization to understand if it can read up to 128 bytes from transceiver modules. However, not all firmware versions support this register, leading to the driver failing to load. Fix by treating an error in the register query as an indication that the feature is not supported. Fixes: 1f4aea1f ("mlxsw: core_env: Read transceiver module EEPROM in 128 bytes chunks") Reported-by:
-
Ido Schimmel authored
The device's manual (PRM - Programmer's Reference Manual) classifies the trap that is used to deliver EMAD responses as an "event trap". Among other things, it means that the only actions that can be associated with the trap are TRAP and FORWARD (NOP). Currently, during driver de-initialization the driver unregisters the trap by setting its action to DISCARD, which violates the above guideline. Future firmware versions will prevent such misuses by returning an error. This does not prevent the driver from working, but an error will be printed to the kernel log during module removal / devlink reload: mlxsw_spectrum 0000:03:00.0: Reg cmd access status failed (status=7(bad parameter)) mlxsw_spectrum 0000:03:00.0: Reg cmd access failed (reg_id=7003(hpkt),type=write) Suppress the error message by aligning the driver to the manual and use a FORWARD (NOP) action when unregistering the trap. Fixes: 4ec14b76 ("mlxsw: Add interface to access registers and process events") Cc: Jiri Pirko <jiri@resnulli.us> Cc: Amit Cohen <amcohen@nvidia.com> Signed-off-by:
-
Justin Chen authored
When bringing down the TX rings we flush the rings but forget to reclaimed the flushed packets. This leads to a memory leak since we do not free the dma mapped buffers. This also leads to tx control block corruption when bringing down the interface for power management. Fixes: 490cb412 ("net: bcmasp: Add support for ASP2.0 Ethernet controller") Signed-off-by:
Justin Chen <justin.chen@broadcom.com> Acked-by:
Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by:
-
Yick Xie authored
If "udp_cmsg_send()" returned 0 (i.e. only UDP cmsg), "connected" should not be set to 0. Otherwise it stops the connected socket from using the cached route. Fixes: 2e8de857 ("udp: add gso segment cmsg") Signed-off-by:
Yick Xie <yick.xie@gmail.com> Cc: stable@vger.kernel.org Reviewed-by:
Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/20240418170610.867084-1-yick.xie@gmail.comSigned-off-by:
-
- 19 Apr, 2024 2 commits
-
-
David Bauer authored
The VXLAN driver currently does not check if the inner layer2 source-address is valid. In case source-address snooping/learning is enabled, a entry in the FDB for the invalid address is created with the layer3 address of the tunnel endpoint. If the frame happens to have a non-unicast address set, all this non-unicast traffic is subsequently not flooded to the tunnel network but sent to the learnt host in the FDB. To make matters worse, this FDB entry does not expire. Apply the same filtering for packets as it is done for bridges. This not only drops these invalid packets but avoids them from being learnt into the FDB. Fixes: d342894c ("vxlan: virtual extensible lan") Suggested-by:
David Bauer <mail@david-bauer.net> Signed-off-by:
-
Duanqiang Wen authored
driver needs queue msix vectors and one misc irq vector, but only queue vectors need irq affinity. when num_online_cpus is less than chip max msix vectors, driver will acquire (num_online_cpus + 1) vecotrs, and call pci_alloc_irq_vectors_affinity functions with affinity params without setting pre_vectors or post_vectors, it will cause return error code -ENOSPC. Misc irq vector is vector 0, driver need to set affinity params .pre_vectors = 1. Fixes: 3f703186 ("net: libwx: Add irq flow functions") Signed-off-by:
-
- 18 Apr, 2024 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Jakub Kicinski: "A little calmer than usual, probably just the timing of sub-tree PRs. Including fixes from netfilter. Current release - regressions: - inet: bring NLM_DONE out to a separate recv() again, fix user space which assumes multiple recv()s will happen and gets blocked forever - drv: mlx5: - restore mistakenly dropped parts in register devlink flow - use channel mdev reference instead of global mdev instance for coalescing - acquire RTNL lock before RQs/SQs activation/deactivation Previous releases - regressions: - net: change maximum number of UDP segments to 128, fix virtio compatibility with Windows peers - usb: ax88179_178a: avoid writing the mac address before first reading Previous releases - always broken: - sched: fix mirred deadlock on device recursion - netfilter: - br_netfilter: skip conntrack input hook for promisc packets - fixes removal of duplicate elements in the pipapo set backend - various fixes for abort paths and error handling - af_unix: don't peek OOB data without MSG_OOB - drv: flower: fix fragment flags handling in multiple drivers - drv: ravb: fix jumbo frames and packet stats accounting Misc: - kselftest_harness: fix Clang warning about zero-length format - tun: limit printing rate when illegal packet received by tun dev" * tag 'net-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (46 commits) net: ethernet: ti: am65-cpsw-nuss: cleanup DMA Channels before using them net: usb: ax88179_178a: avoid writing the mac address before first reading net: ravb: Fix RX byte accounting for jumbo packets net: ravb: Fix GbEth jumbo packet RX checksum handling net: ravb: Allow RX loop to move past DMA mapping errors net: ravb: Count packets instead of descriptors in R-Car RX path net: ethernet: mtk_eth_soc: fix WED + wifi reset net:usb:qmi_wwan: support Rolling modules selftests: kselftest_harness: fix Clang warning about zero-length format net/sched: Fix mirred deadlock on device recursion netfilter: nf_tables: fix memleak in map from abort path netfilter: nf_tables: restore set elements when delete set fails netfilter: nf_tables: missing iterator type in lookup walk s390/ism: Properly fix receive message buffer allocation net: dsa: mt7530: fix port mirroring for MT7988 SoC switch net: dsa: mt7530: fix mirroring frames received on local port tun: limit printing rate when illegal packet received by tun dev ice: Fix checking for unsupported keys on non-tunnel device ice: tc: allow zero flags in parsing tc flower ice: tc: check src_vsi in case of traffic from VF ...
-
