- 25 Nov, 2016 13 commits
-
-
Arkadiusz Hiler authored
Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michal Winiarski <michal.winiarski@intel.com> Signed-off-by:
Arkadiusz Hiler <arkadiusz.hiler@intel.com> Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1480096777-12573-6-git-send-email-arkadiusz.hiler@intel.comSigned-off-by:
-
Arkadiusz Hiler authored
send_mutex is used to serialise communication with GuC via intel_guc_send(). Since functions that utilize it are no longer limited to submission, initialization should be handled as a part of general setup. v2: move initialization to *_early() Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michal Winiarski <michal.winiarski@intel.com> Signed-off-by:
-
Arkadiusz Hiler authored
guc_send(), guc_recv() and related functions were introduced in the i915_guc_submission.c and their scope was limited only to that file. Those are not submission specific though. This patch moves moves them to intel_uc.c with intel_ prefix added. v2: rename intel_guc_log_* functions and clean up intel_guc_send usages Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michal Winiarski <michal.winiarski@intel.com> Signed-off-by:
-
Arkadiusz Hiler authored
To facilitate code reorganization we are renaming everything that contains guc2host or host2guc. host2guc_action() and host2guc_action_response() become guc_send() and guc_recv() respectively. Other host2guc_*() functions become simply guc_*(). Other entities are renamed basing on context they appear in: - HOST2GUC_ACTIONS_& become INTEL_GUC_ACTION_* - HOST2GUC_{INTERRUPT,TRIGGER} become GUC_SEND_{INTERRUPT,TRIGGER} - GUC2HOST_STATUS_* become INTEL_GUC_STATUS_* - GUC2HOST_MSG_* become INTEL_GUC_RECV_MSG_* - action_lock becomes send_mutex v2: drop unnecessary backslashes and use BIT() instead of '<<' v3: shortened enum names and INTEL_GUC_STATUS_* Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michal Winiarski <michal.winiarski@intel.com> Signed-off-by: -
Arkadiusz Hiler authored
GuC is not the only one micro controller we have. There are also HuC and DMC. Making the file more general will help with code organization. Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michal Winiarski <michal.winiarski@intel.com> Signed-off-by:
-
Ander Conselvan de Oliveira authored
The check in __intel_uncore_early_sanitize() to disable decoupled mmio would disable it for every platform that is not broxton. While that's not a problem now since only broxton supports that, simply setting .has_decoupled_mmio in a new platform's device info wouldn't suffice. So avoid future confusion and change the workaround to only change the value of has_decoupled_mmio for broxton. v2: git add compile fix. (Ander) Cc: Praveen Paneri <praveen.paneri@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Imre Deak <imre.deak@intel.com> Signed-off-by:
Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Reviewed-by:
Imre Deak <imre.deak@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1479993807-29353-1-git-send-email-ander.conselvan.de.oliveira@intel.com
-
Ander Conselvan de Oliveira authored
Pass dev_priv to intel_setup_outputs() and functions called by it, since those are all intel i915 specific functions. Also, in the majority of the functions dev_priv is used more often than dev. In the rare cases where there are a few calls back into drm core, a local dev variable was added. v2: Don't convert dev to &dev_priv->drm in intel_dsi_init. (Ville) Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1479910904-11005-1-git-send-email-ander.conselvan.de.oliveira@intel.com
-
Chris Wilson authored
Add the tracking required to enable debugobjects for fences to improve error detection in BAT. The debugobject interface lets us track the lifetime and phases of the fences even while being embedded into larger structs, i.e. to check they are not used after they have been released. v2: Don't populate the stubs, debugobjects checks for a NULL pointer and treats it equivalently. Signed-off-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161125131718.20978-4-chris@chris-wilson.co.uk
-
Chris Wilson authored
Currently, we have an active reference for the request until it is retired. Though it cannot be retired before it has been executed by hardware, the request may be completed before we have finished processing the execute fence, i.e. we may continue to process that fence as we free the request. Fixes: 5590af3e ("drm/i915: Drive request submission through fence callbacks") Fixes: 23902e49 ("drm/i915: Split request submit/execute phase into two") Signed-off-by:
-
Chris Wilson authored
Before we return the request back to the kmem_cache after a failed i915_gem_request_alloc(), we should assert that it has not been added to any global state tracking. Signed-off-by:
-
Chris Wilson authored
While we will check that the request is completed prior to being retired, by placing an assert that the request is complete at the entrypoint of the function we can more clearly document the function's preconditions. Signed-off-by:
-
Chris Wilson authored
Show the last submitted seqno to the engine, not the overall next seqno, as this is more pertinent information when inspecting the pageflip and whether the CS or display engine stalled. Signed-off-by:
-
Joonas Lahtinen authored
Rename i915_gem_timeline member 'next_seqno' into 'seqno' as the variable is pre-increment. We've already had two bugs due to the confusing name, second is fixed as follow-up patch. Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
- 24 Nov, 2016 6 commits
-
-
Libin Yang authored
Some monitors will have noise or even no sound after applying the patch 6014ac12. In patch 6014ac12, it will reset the cts value to 0 for HDMI. However, we need to disable Enable CTS or M Prog bit. This is the initial setting after HW reset. Fixes: 6014ac12 ("drm/i915/audio: set proper N/M in modeset") Signed-off-by:
Libin Yang <libin.yang@intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1478853988-139842-1-git-send-email-libin.yang@intel.com
-
Chris Wilson authored
As i915.enable_cmd_parser is an unsafe option, make it read-only at runtime. Now that it is constant, we can use the value determined during initialisation as to whether we need the cmdparser at execbuffer time. v2: Remove the inline for its single user, it is clear enough (and shorter) without! Signed-off-by:
-
Chris Wilson authored
The i915_next_seqno read value is to be the next seqno used by the kernel. However, in the conversion to atomics ops for gt.next_seqno, in commit 28176ef4 ("drm/i915: Reserve space in the global seqno during request allocation"), this was changed from a post-increment to a pre-increment. This increment was missed from the value reported by debugfs, so in effect it was reporting the current seqno (last assigned), not the next seqno. Fixes: 28176ef4 ("drm/i915: Reserve space in the global seqno during request allocation") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=81209Signed-off-by:
-
Matthew Auld authored
No sense in keeping the cmd_descriptor and cmd_table structs in i915_drv.h, now that they are no longer referenced externally. Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Matthew Auld <matthew.auld@intel.com> Reviewed-by:
-
Matthew Auld authored
Doing cmd_header >> 29 to extract our 3-bit client value where we know cmd_header is a u32 shouldn't then also require the use of a mask. So remove the redundant operation and get rid of INSTR_CLIENT_MASK now that there are no longer any users. Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
Chris Wilson authored
i915_hws_info() has not been kept upto date (missing new engines) and so I consider it to be unused. HWS is included in the error state, which would be an avenue to retrieving it if required in future (possibly via i915_engine_info). As it is currently oopsing with an rpm testcase, just remove it. Fixes: 3b3f1650 ("drm/i915: Allocate intel_engine_cs structure only for the enabled engines") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98838Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com>
-
- 23 Nov, 2016 18 commits
-
-
Maarten Lankhorst authored
In all cases we can now obtain the relevant crtc_state/conn_state from the relevant callbacks, which means all the ->config accesses can be removed and the code cleaned up. Changes since v1: - cstate -> crtc_state Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/8b02a6b4-606a-e43a-b357-ad17f491525b@linux.intel.com [mlankhorst: Reinstate missing comment] Reviewed-by:
-
Ville Syrjälä authored
No need for the extra break statements and whatnot, just return the error directly. And tighten the scope of the local variables while at it. Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch>
-
Ville Syrjälä authored
A modeset on one pipe can update dev_priv->atomic_cdclk_freq without actually touching the hardware, in which case we won't force a modeset on all the pipes, and thus won't lock any of the other pipes either. That means a parallel plane update on another pipe could be looking at a stale dev_priv->atomic_cdcdlk_freq and thus fail to notice when the plane configuration is invalid, or potentially reject a valid update. To overcome this we must protect writes to atomic_cdclk_freq with all the crtc locks, and thus for reads any single crtc lock will be sufficient protection. Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by:
-
Ville Syrjälä authored
When we end up not recomputing the cdclk, we need to populate intel_state->cdclk with the "atomic_cdclk_freq" instead of the current cdclk_freq. When no pipes are active, the actual cdclk_freq may be lower than what the configuration of the planes and pipes would require from the point of view of the software state. This fixes bogus WARNS from skl_max_scale() which is trying to check the plane software state against the cdclk frequency. So any time it got called during DPMS off for instance, we might have tripped the warn if the current mode would have required a higher than minimum cdclk. v2: Drop the dev_cdclk stuff (Maarten) Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Mika Kahola <mika.kahola@intel.com> Cc: bruno.pagani@ens-lyon.org Cc: Daniel J Blueman <daniel.blueman@gmail.com> Cc: Paul Bolle <pebolle@tiscali.nl> Cc: Joseph Yasi <joe.yasi@gmail.com> Tested-by:
Paul Bolle <pebolle@tiscali.nl> Tested-by: Joseph Yasi <joe.yasi@gmail.com> (v1) Cc: stable@vger.kernel.org Fixes: 1a617b77 ("drm/i915: Keep track of the cdclk as if all crtc's were active.") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98214Signed-off-by:
-
Bob Paauwe authored
For BXT, there is only one bit that enables/disables dual-link mode and not different bits depending on which pipe is being used. Signed-off-by:
Bob Paauwe <bob.j.paauwe@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1479767046-3964-1-git-send-email-bob.j.paauwe@intel.comSigned-off-by:
-
Ville Syrjälä authored
Let's try not to abuse plane->plane for sprites on VLV/CHV and instead use plane->id. Since out watermark structures aren't entirely plane type agnostic (for now) and start indexing sprites from 0 we'll add a small helper to convert between the two bases. Signed-off-by:
Paulo Zanoni <paulo.r.zanoni@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1479830524-7882-7-git-send-email-ville.syrjala@linux.intel.com
-
Ville Syrjälä authored
Use intel_plane->id to derive the VLV/CHV sprite register offsets instead of abusing plane->plane which is really meant to for primary planes only. v2: Convert assert_sprites_disabled() over as well v3: Rename the reg macro parameter to 'plane_id' as well (Paulo) Signed-off-by:
-
Ville Syrjälä authored
Replace the intel_plane->plane and hardcoded 0 usage in the SKL plane code with intel_plane->id. This should make the SKL "primary" and "sprite" code virtually identical, so the next logical step would likely be dropping one of the copies. Signed-off-by:
-
Ville Syrjälä authored
Nuke skl_wm_plane_id() and just use the new intel_plane->id. v2: Convert skl_write_plane_wm() as well v3: Convert skl_pipe_wm_get_hw_state() correctly v4: Rebase due to changes in the wm code Drop the cursor FIXME from the total data rate calc (Paulo) Use the "[PLANE:%d:%s]" format in debug print (Paulo) Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Lyude <cpaul@redhat.com> Signed-off-by:Lyude <lyude@redhat.com>
-
Ville Syrjälä authored
Add a mask of which planes are available for each pipe. This doesn't quite work for old platforms with dynamic plane<->pipe assignment, but as we don't support that sort of stuff (yet) we can get away with it. The main use I have for this is the for_each_plane_id_on_crtc() macro for iterating over all possible planes on the crtc. I suppose we could not add the mask, and instead iterate by comparing intel_plane->pipe but then we'd need a local intel_plane variable which is just unnecessary clutter in some cases. But I'm not hung up on this, so if people prefer the other option I could be convinced to use it. v2: Use BIT() in the iterator macro too (Paulo) Signed-off-by:
-
Ville Syrjälä authored
As I told people in [1] we really should not be confusing enum plane as a per-pipe plane identifier. Looks like that happened nonetheless, so let's fix it up by splitting the two into two enums. We'll also want something we just directly pass to various register offset macros and whatnot on SKL+. So let's make this new thing work for that. Currently we pass intel_plane->plane for the "sprites" and just a hardcoded zero for the "primary" planes. We want to get rid of that hardocoding so that we can share the same code for all planes (apart from the legacy cursor of course). [1] https://lists.freedesktop.org/archives/intel-gfx/2015-September/076082.html Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Daniel Vetter <daniel@ffwll.ch> Signed-off-by:
-
Ville Syrjälä authored
Someone forgot to make skl_write_{plane,cursor}_wm() static when removing the prototypes from the header. Sparse isn't pleased. Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Lyude <cpaul@redhat.com> Cc: Matt Roper <matthew.d.roper@intel.com> Fixes: e62929b3 ("drm/i915/gen9+: Program watermarks as a separate step during evasion, v3.") Signed-off-by: -
Tvrtko Ursulin authored
It has only one call site from the same file. v2: Also rename it to alloc_context_obj. (Chris Wilson) Signed-off-by:
-
Tvrtko Ursulin authored
Signed-off-by:
-
Imre Deak authored
All callers asked for a forced change but the function ignored this parameter. It doesn't seem to be necessary to force the change in any case so let's just remove the parameter. Cc: Shashank Sharma <shashank.sharma@intel.com> Signed-off-by:
Shashank Sharma <shashank.sharma@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1479755707-29596-5-git-send-email-imre.deak@intel.com
-
Imre Deak authored
Some LSPCON adaptors may return an incorrect LSPCON mode right after waking from DP Sleep state. This is the case at least for the ParadTech PS175 adaptor, both when waking because of exiting the DP Sleep to active state, or due to any other AUX CH transfer. We can determine the current expected mode based on whether the DPCD area is accessible, since according to the LSPCON spec this area is only accesible in PCON mode. This wait will avoid us trying to change the mode, while the current expected mode hasn't settled yet and start link training before the adaptor thinks it's in PCON mode after waking from DP Sleep state. Cc: Shashank Sharma <shashank.sharma@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Imre Deak authored
We need to get to LSPCON in the next patch, so factor out the helper for it. While at it also remove the redundant GEN9 check. Cc: Shashank Sharma <shashank.sharma@intel.com> Signed-off-by:
-
Imre Deak authored
Some LSPCON adaptors won't properly wake up in response to an AUX request after the adaptor was placed to a DP Sink Sleep state (via writing 0x2 to DP_SET_POWER). Based on the DP 1.4 specification 5.2.5, the sink may place the AUX CH into a low-power state while in Sleep state, but should wake it up in response to an AUX request within 1-20ms (answering with AUX defers while waking it up). As opposed to this at least the ParadTech PS175 adaptor won't fully wake in response to the first I2C-over-AUX access and will occasionally ignore the offset in I2C messages. This can result in accessing the DDC register at offset 0 regardless of the specified offset and the LSPCON detection failing. To fix this do an initial dummy read from the DPCD area. The PS175 will defer this access until it's fully woken (taking ~150ms) making sure the following I2C-over-AUX accesses will work correctly. Cc: Shashank Sharma <shashank.sharma@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Reference: https://bugs.freedesktop.org/show_bug.cgi?id=98353Signed-off-by:
-
- 22 Nov, 2016 3 commits
-
-
Chris Wilson authored
In order to prevent a race between the old callback submitting an incomplete request and i915_gem_set_wedged() installing its nop handler, we must ensure that the swap occurs when the machine is idle (stop_machine). v2: move context lost from out of BKL. Signed-off-by:
Mika Kuoppala <mika.kuoppala@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161122144121.7379-4-chris@chris-wilson.co.uk
-
Chris Wilson authored
Since the submit/execute split in commit d55ac5bf ("drm/i915: Defer transfer onto execution timeline to actual hw submission") the global seqno advance was deferred until the submit_request callback. After wedging the GPU, we were installing a nop_submit_request handler (to avoid waking up the dead hw) but I had missed converting this over to the new scheme. Under the new scheme, we have to explicitly call i915_gem_submit_request() from the submit_request handler to mark the request as on the hardware. If we don't the request is always pending, and any waiter will continue to wait indefinitely and hangcheck will not be able to resolve the lockup. References: https://bugs.freedesktop.org/show_bug.cgi?id=98748 Testcase: igt/gem_eio/in-flight Fixes: d55ac5bf ("drm/i915: Defer transfer onto execution timeline to actual hw submission") Signed-off-by:
-
Chris Wilson authored
If the gpu reset fails and the machine is terminally wedged, further hangchecks achieve nothing but noise. Disable them, with a corollary that we re-enable hangchecking after a successful GPU reset in case the user is artificially bringing the machine back to life through the debug interface. Signed-off-by:
-
