Backends may need to protect themselves against an insane number of
produced requests stored by a frontend, in case they iterate over
requests until reaching the req_prod value. There can't be more
requests on the ring than the difference between produced requests
and produced (but possibly not yet published) responses.

This is a more strict alternative to a patch previously posted by
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

We need to make sure that the device is not RO or that
the request is not past the number of sectors we want to
issue the DISCARD operation for.

This fixes CVE-2013-2140.

Cc: stable@vger.kernel.org
Acked-by: Jan Beulich <JBeulich@suse.com>
Acked-by: Ian Campbell <Ian.Campbell@citrix.com>
[v1: Made it pr_warn instead of pr_debug]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Currently xen-blkback passes the logical sector size over xenbus and
xen-blkfront sets up the paravirt disk with that logical block size.
But newer drives usually have the logical sector size set to 512 for
compatibility reasons and would show the actual sector size only in
physical sector size.
This results in the device being partitioned and accessed in dom0 with
the correct sector size, but the guest thinks 512 bytes is the correct
block size. And that results in poor performance.

To fix this, blkback gets modified to pass also physical-sector-size
over xenbus and blkfront to use both values to set up the paravirt
disk. I did not just change the passed in sector-size because I am
not sure having a bigger logical sector size than the physical one
is valid (and that would happen if a newer dom0 kernel hits an older
domU kernel). Also this way a domU set up before should still be
accessible (just some tools might detect the unaligned setup).

[v2: Make xenbus write failure non-fatal]
[v3: Use xenbus_scanf instead of xenbus_gather]
[v4: Rebased against segment changes]
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

to a testing subdirectory (as this value should not be baked
for the life-time) and also in an appropiate file.

Also modified the introduction Linux version from 3.10 to 3.11.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

The max module parameter (by default 32) is the maximum number of
segments that the frontend will negotiate with the backend for indirect
descriptors.  Higher value means more potential throughput but more
memory usage. The backend picks the minimum of the frontend and its
default backend value.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

In blkif_queue_request blkfront iterates over the scatterlist in order
to set the segments of the request, and in blkif_completion blkfront
iterates over the raw request, which makes it hard to know the exact
position of the source and destination memory positions.

This can be solved by allocating a scatterlist for each request, that
will be keep until the request is finished, allowing us to copy the
data back to the original memory without having to iterate over the
raw request.

Oracle-Bug: 16660413 - LARGE ASYNCHRONOUS READS APPEAR BROKEN ON 2.6.39-400
CC: stable@vger.kernel.org
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reported-and-Tested-by: Anne Milicia <anne.milicia@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Allocate pending requests in smaller chunks instead of allocating them
all at the same time.

This change also removes the global array of pending_reqs, it is no
longer necessay.

Variables related to the grant mapping have been grouped into a struct
called "grant_page", this allows to allocate them in smaller chunks,
and also improves memory locality.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reported-by: Sander Eikelenboom <linux@eikelenboom.it>
Tested-by: Sander Eikelenboom <linux@eikelenboom.it>
Reviewed-by: David Vrabel <david.vrabel@citrix.com>
Cc: David Vrabel <david.vrabel@citrix.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Indirect descriptors introduce a new block operation
(BLKIF_OP_INDIRECT) that passes grant references instead of segments
in the request. This grant references are filled with arrays of
blkif_request_segment_aligned, this way we can send more segments in a
request.

The proposed implementation sets the maximum number of indirect grefs
(frames filled with blkif_request_segment_aligned) to 256 in the
backend and 32 in the frontend. The value in the frontend has been
chosen experimentally, and the backend value has been set to a sane
value that allows expanding the maximum number of indirect descriptors
in the frontend if needed.

The migration code has changed from the previous implementation, in
which we simply remapped the segments on the shared ring. Now the
maximum number of segments allowed in a request can change depending
on the backend, so we have to requeue all the requests in the ring and
in the queue and split the bios in them if they are bigger than the
new maximum number of segments.

[v2: Fixed minor comments by Konrad.
[v1: Added padding to make the indirect request 64bit aligned.
 Added some BUGs, comments; fixed number of indirect pages in
 blkif_get_x86_{32/64}_req. Added description about the indirect operation
 in blkif.h]
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
[v3: Fixed spaces and tabs mix ups]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Preparatory change for implementing indirect descriptors. Change
xen_blkbk_{map/unmap} in order to be able to map/unmap a random amount
of grants (previously it was limited to
BLKIF_MAX_SEGMENTS_PER_REQUEST). Also, remove the usage of pending_req
in the map/unmap functions, so we can map/unmap grants without needing
to pass a pending_req.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: xen-devel@lists.xen.org
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Remove the last dependency from blkbk by moving the list of free
requests to blkif. This change reduces the contention on the list of
available requests.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: xen-devel@lists.xen.org
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Moving grant ref handles from blkbk to pending_req will allow us to
get rid of the shared blkbk structure.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: xen-devel@lists.xen.org
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

This mechanism allows blkback to change the number of grants
persistently mapped at run time.

The algorithm uses a simple LRU mechanism that removes (if needed) the
persistent grants that have not been used since the last LRU run, or
if all grants have been used it removes the first grants in the list
(that are not in use).

The algorithm allows the user to change the maximum number of
persistent grants, by changing max_persistent_grants in sysfs.

Since we are storing the persistent grants used inside the request
struct (to be able to mark them as "unused" when unmapping), we no
longer need the bitmap (unmap_seg).
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: xen-devel@lists.xen.org
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Using balloon pages for all granted pages allows us to simplify the
logic in blkback, especially in the xen_blkbk_map function, since now
we can decide if we want to map a grant persistently or not after we
have actually mapped it. This could not be done before because
persistent grants used ballooned pages, whereas non-persistent grants
used pages from the kernel.

This patch also introduces several changes, the first one is that the
list of free pages is no longer global, now each blkback instance has
it's own list of free pages that can be used to map grants. Also, a
run time parameter (max_buffer_pages) has been added in order to tune
the maximum number of free pages each blkback instance will keep in
it's buffer.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Cc: xen-devel@lists.xen.org
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Cc: xen-devel@lists.xen.org
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Pull x86 fixes from Ingo Molnar:
 "Misc fixes"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mm: Flush lazy MMU when DEBUG_PAGEALLOC is set
  x86/mm/cpa/selftest: Fix false positive in CPA self test
  x86/mm/cpa: Convert noop to functional fix
  x86, mm: Patch out arch_flush_lazy_mmu_mode() when running on bare metal
  x86, mm, paravirt: Fix vmalloc_fault oops during lazy MMU updates

Pull scheduler fixes from Ingo Molnar:
 "Misc fixlets"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/cputime: Fix accounting on multi-threaded processes
  sched/debug: Fix sd->*_idx limit range avoiding overflow
  sched_clock: Prevent 64bit inatomicity on 32bit systems
  sched: Convert BUG_ON()s in try_to_wake_up_local() to WARN_ON_ONCE()s

Pull perf fixes from Ingo Molnar:
 "Misc fixlets"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf: Fix error return code
  ftrace: Fix strncpy() use, use strlcpy() instead of strncpy()
  perf: Fix strncpy() use, use strlcpy() instead of strncpy()
  perf: Fix strncpy() use, always make sure it's NUL terminated
  perf: Fix ring_buffer perf_output_space() boundary calculation
  perf/x86: Fix uninitialized pt_regs in intel_pmu_drain_bts_buffer()

Pull drm fixes from Dave Airlie:
 "One fix for a hotplug locking regressions, and one fix for an oops if
  you unplug the monitor at an inopportune moment on the udl device."

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/fb-helper: Fix locking in drm_fb_helper_hotplug_event
  udl: handle EDID failure properly.

Pull m68knommu fix from Greg Ungerer:
 "This contains only a single compilation fix for ColdFire m68k targets
  that use local non-GPIOLIB support."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  m68k: define a local gpio_request_one() function

Pull watchdog fix from Wim Van Sebroeck:
 "It will fix compile errors for the at91rm9200_wdt driver"

* git://www.linux-watchdog.org/linux-watchdog:
  watchdog: Revert the AT91RM9200_WATCHDOG dependency

Pull one more btrfs fix from Chris Mason:
 "This has a recent fix from Josef for our tree log replay code.  It
  fixes problems where the inode counter for the number of bytes in the
  file wasn't getting updated properly during fsync replay.

  The commit did get rebased this morning, but it was only to clean up
  the subject line.  The code hasn't changed."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  Btrfs: make sure nbytes are right after log replay

Merge tag 'trace-fixes-v3.9-rc-v3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull ftrace fixes from Steven Rostedt:
 "Namhyung Kim found and fixed a bug that can crash the kernel by simply
  doing: echo 1234 | tee -a /sys/kernel/debug/tracing/set_ftrace_pid

  Luckily, this can only be done by root, but still is a nasty bug."

* tag 'trace-fixes-v3.9-rc-v3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  ftrace: Move ftrace_filter_lseek out of CONFIG_DYNAMIC_FTRACE section
  tracing: Fix possible NULL pointer dereferences

Nothing is using it yet, but this will allow us to delay the open-time
checks to use time, without breaking the normal UNIX permission
semantics where permissions are determined by the opener (and the file
descriptor can then be passed to a different process, or the process can
drop capabilities).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Compiling the at91rm9200_wdt.c driver without at91rm9200
support was leading to several errors:

drivers/built-in.o: In function `at91_wdt_close':
at91_adc.c:(.text+0xc9fe4): undefined reference to `at91_st_base'
drivers/built-in.o: In function `at91_wdt_write':
at91_adc.c:(.text+0xca004): undefined reference to `at91_st_base'
drivers/built-in.o: In function `at91wdt_shutdown':
at91_adc.c:(.text+0xca01c): undefined reference to `at91_st_base'
drivers/built-in.o: In function `at91wdt_suspend':
at91_adc.c:(.text+0xca038): undefined reference to `at91_st_base'
drivers/built-in.o: In function `at91_wdt_open':
at91_adc.c:(.text+0xca0cc): undefined reference to `at91_st_base'
drivers/built-in.o:at91_adc.c:(.text+0xca2c8): more undefined references to
`at91_st_base' follow

So, reverting the modification of the "depends" Kconfig line
introduced by patch a6a1bcd3 (watchdog: at91rm9200: add DT support)
seems to be the good solution.
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

Revert commit 62a3ddef ("vfs: fix spinning prevention in prune_icache_sb").

This commit doesn't look right: since we are looking at the tail of the
list (sb->s_inode_lru.prev) if we want to skip an inode, we should put
it back at the head of the list instead of the tail, otherwise we will
keep spinning on it.

Discovered when investigating why prune_icache_sb came top in perf
reports of a swapping load.
Signed-off-by: Suleiman Souhlal <suleiman@google.com>
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: stable@vger.kernel.org # v3.2+
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Anatol Pomozov identified a race condition that hits module unloading
and re-loading.  To quote Anatol:

 "This is a race codition that exists between kset_find_obj() and
  kobject_put().  kset_find_obj() might return kobject that has refcount
  equal to 0 if this kobject is freeing by kobject_put() in other
  thread.

  Here is timeline for the crash in case if kset_find_obj() searches for
  an object tht nobody holds and other thread is doing kobject_put() on
  the same kobject:

    THREAD A (calls kset_find_obj())     THREAD B (calls kobject_put())
    splin_lock()
                                         atomic_dec_return(kobj->kref), counter gets zero here
                                         ... starts kobject cleanup ....
                                         spin_lock() // WAIT thread A in kobj_kset_leave()
    iterate over kset->list
    atomic_inc(kobj->kref) (counter becomes 1)
    spin_unlock()
                                         spin_lock() // taken
                                         // it does not know that thread A increased counter so it
                                         remove obj from list
                                         spin_unlock()
                                         vfree(module) // frees module object with containing kobj

    // kobj points to freed memory area!!
    kobject_put(kobj) // OOPS!!!!

  The race above happens because module.c tries to use kset_find_obj()
  when somebody unloads module.  The module.c code was introduced in
  commit 6494a93d"

Anatol supplied a patch specific for module.c that worked around the
problem by simply not using kset_find_obj() at all, but rather than make
a local band-aid, this just fixes kset_find_obj() to be thread-safe
using the proper model of refusing the get a new reference if the
refcount has already dropped to zero.

See examples of this proper refcount handling not only in the kref
documentation, but in various other equivalent uses of this pattern by
grepping for atomic_inc_not_zero().

[ Side note: the module race does indicate that module loading and
  unloading is not properly serialized wrt sysfs information using the
  module mutex.  That may require further thought, but this is the
  correct fix at the kobject layer regardless. ]
Reported-analyzed-and-tested-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

While trying to track down a tree log replay bug I noticed that fsck was always
complaining about nbytes not being right for our fsynced file.  That is because
the new fsync stuff doesn't wait for ordered extents to complete, so the inodes
nbytes are not necessarily updated properly when we log it.  So to fix this we
need to set nbytes to whatever it is on the inode that is on disk, so when we
replay the extents we can just add the bytes that are being added as we replay
the extent.  This makes it work for the case that we have the wrong nbytes or
the case that we logged everything and nbytes is actually correct.  With this
I'm no longer getting nbytes errors out of btrfsck.

Cc: stable@vger.kernel.org
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>

This patch attempts to fix:

	https://bugzilla.kernel.org/show_bug.cgi?id=56461

The symptom is a crash and messages like this:

	chrome: Corrupted page table at address 34a03000
	*pdpt = 0000000000000000 *pde = 0000000000000000
	Bad pagetable: 000f [#1] PREEMPT SMP

Ingo guesses this got introduced by commit 611ae8e3 ("x86/tlb:
enable tlb flush range support for x86") since that code started to free
unused pagetables.

On x86-32 PAE kernels, that new code has the potential to free an entire
PMD page and will clear one of the four page-directory-pointer-table
(aka pgd_t entries).

The hardware aggressively "caches" these top-level entries and invlpg
does not actually affect the CPU's copy.  If we clear one we *HAVE* to
do a full TLB flush, otherwise we might continue using a freed pmd page.
(note, we do this properly on the population side in pud_populate()).

This patch tracks whenever we clear one of these entries in the 'struct
mmu_gather', and ensures that we follow up with a full tlb flush.

BTW, I disassembled and checked that:

	if (tlb->fullmm == 0)
and
	if (!tlb->fullmm && !tlb->need_flush_all)

generate essentially the same code, so there should be zero impact there
to the !PAE case.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Artem S Tashkinov <t.artem@mailcity.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull SCSI target fixes from Nicholas Bellinger:
 "Here are remaining target-pending items for v3.9-rc7 code.

  The tcm_vhost patches are more than I'd usually include in a -rc7
  pull, but are changes required for v3.9 to work correctly with the
  pending vhost-scsi-pci QEMU upstream series merge.  (Paolo CC'ed)

  Plus Asias's conversion to use vhost_virtqueue->private_data + RCU for
  managing vhost-scsi endpoints has gotten alot of review + testing over
  the past weeks, and MST has ACKed the full series.

  Also, there is a target patch to fix a long-standing bug within
  control CDB handling with Standby/Offline/Transition ALUA port access
  states, that had been incorrectly rejecting the control CDBs required
  for LUN scan to work during these port group states.  CC'ing to
  stable."

* git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
  target: Fix incorrect fallthrough of ALUA Standby/Offline/Transition CDBs
  tcm_vhost: Send bad target to guest when cmd fails
  tcm_vhost: Add vhost_scsi_send_bad_target() helper
  tcm_vhost: Fix tv_cmd leak in vhost_scsi_handle_vq
  tcm_vhost: Remove double check of response
  tcm_vhost: Initialize vq->last_used_idx when set endpoint
  tcm_vhost: Use vq->private_data to indicate if the endpoint is setup
  tcm_vhost: Use ACCESS_ONCE for vs->vs_tpg[target] access

Pull SCSI fixes from James Bottomley:
 "This is a set of ten bug fixes (and two consisting of copyright year
  update and version number change) pretty much all of which involve
  either a crash or a hang except the removal of the random sleep from
  the qla2xxx driver (which is a coding error so bad, we want it gone
  before anyone has a chance to copy it)."

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  [SCSI] lpfc: fix potential NULL pointer dereference in lpfc_sli4_rq_put()
  [SCSI] libsas: fix handling vacant phy in sas_set_ex_phy()
  [SCSI] ibmvscsi: Fix slave_configure deadlock
  [SCSI] qla2xxx: Update the driver version to 8.04.00.13-k.
  [SCSI] qla2xxx: Remove debug code that msleeps for random duration.
  [SCSI] qla2xxx: Update copyright dates information in LICENSE.qla2xxx file.
  [SCSI] qla2xxx: Fix crash during firmware dump procedure.
  [SCSI] Revert "qla2xxx: Add setting of driver version string for vendor application."
  [SCSI] ipr: dlpar failed when adding an adapter back
  [SCSI] ipr: fix addition of abort command to HRRQ free queue
  [SCSI] st: Take additional queue ref in st_probe
  [SCSI] libsas: use right function to alloc smp response
  [SCSI] ipr: ipr_test_msi() fails when running with msi-x enabled adapter

Pull CIFS fix from Steve French:
 "Fixes a regression in cifs in which a password which begins with a
  comma is parsed incorrectly as a blank password"

* 'for-next' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: Allow passwords which begin with a delimitor

As ftrace_filter_lseek is now used with ftrace_pid_fops, it needs to
be moved out of the #ifdef CONFIG_DYNAMIC_FTRACE section as the
ftrace_pid_fops is defined when DYNAMIC_FTRACE is not.

Cc: stable@vger.kernel.org
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Currently set_ftrace_pid and set_graph_function files use seq_lseek
for their fops.  However seq_open() is called only for FMODE_READ in
the fops->open() so that if an user tries to seek one of those file
when she open it for writing, it sees NULL seq_file and then panic.

It can be easily reproduced with following command:

  $ cd /sys/kernel/debug/tracing
  $ echo 1234 | sudo tee -a set_ftrace_pid

In this example, GNU coreutils' tee opens the file with fopen(, "a")
and then the fopen() internally calls lseek().

Link: http://lkml.kernel.org/r/1365663302-2170-1-git-send-email-namhyung@kernel.org

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: stable@vger.kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Pull sound fixes from Takashi Iwai:
 "This contains a few small ASoC fixes (wm8903, wm5102, samsung-i2s,
  tegra, and soc-compress) and an endian fix for NI USB-audio devices,
  update for Mark's e-mail address.

  No scary changes, AFAIS."

* tag 'sound-3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  MAINTAINERS: Update e-mail address
  ASoC: wm5102: Correct lookup of arizona struct in SYSCLK event
  ASoC: wm8903: Fix the bypass to HP/LINEOUT when no DAC or ADC is running
  ALSA: usb-audio: fix endianness bug in snd_nativeinstruments_*
  ASoC: tegra: Don't claim to support PCM pause and resume
  ASoC: Samsung: set drvdata before adding secondary device
  ASoC: Samsung: return error if drvdata is not set
  ASoC: compress: Cancel delayed power down if needed
  ASoC: core: Fix to check return value of snd_soc_update_bits_locked()

Merge tag 'asoc-maintainers-v3.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

MAINTAINERS: Update e-mail address

Update the e-mail address I use for subsystems.

Update the e-mail address I use for subsystems.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

Merge tag 'asoc-v3.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Updates for v3.9

A few updates, more than I'd like, fixing some relatively small issues
but mostly driver specific ones.  Nothing wildly exciting so if it
doesn't make v3.9 it won't be the end of the world but it'd be nice.

When CONFIG_DEBUG_PAGEALLOC is set page table updates made by
kernel_map_pages() are not made visible (via TLB flush)
immediately if lazy MMU is on. In environments that support lazy
MMU (e.g. Xen) this may lead to fatal page faults, for example,
when zap_pte_range() needs to allocate pages in
__tlb_remove_page() -> tlb_next_batch().
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: konrad.wilk@oracle.com
Link: http://lkml.kernel.org/r/1365703192-2089-1-git-send-email-boris.ostrovsky@oracle.comSigned-off-by: Ingo Molnar <mingo@kernel.org>

If the pmd is not present, _PAGE_PSE will not be set anymore.
Fix the false positive.
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: Stefan Bader <stefan.bader@canonical.com>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Borislav Petkov <bp@alien8.de>
Link: http://lkml.kernel.org/r/1365687369-30802-1-git-send-email-aarcange@redhat.comSigned-off-by: Ingo Molnar <mingo@kernel.org>