- 28 Aug, 2023 29 commits
-
-
Sabrina Dubroca authored
We're going to add other fields to it to fully describe a cipher, so the "_size" name won't match the contents. Signed-off-by:
Sabrina Dubroca <sd@queasysnail.net> Link: https://lore.kernel.org/r/76ca6c7686bd6d1534dfa188fb0f1f6fabebc791.1692977948.git.sd@queasysnail.netSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Sabrina Dubroca authored
tls_cipher_size_desc indexes ciphers by their type, but we're not using indices 0..50 of the array. Each struct tls_cipher_size_desc is 20B, so that's a lot of unused memory. We can reindex the array starting at the lowest used cipher_type. Introduce the get_cipher_size_desc helper to find the right item and avoid out-of-bounds accesses, and make tls_cipher_size_desc's size explicit so that gcc reminds us to update TLS_CIPHER_MIN/MAX when we add a new cipher. Signed-off-by:
-
Sabrina Dubroca authored
Signed-off-by:
-
Sabrina Dubroca authored
It's only used in net/tls/*, no need to bloat include/net/tls.h. Signed-off-by:
-
Sabrina Dubroca authored
This test will need to be updated if new ciphers are added. Signed-off-by:
-
Sabrina Dubroca authored
The kernel accepts fetching either just the version and cipher type, or exactly the per-cipher struct. Also check that getsockopt returns what we just passed to the kernel. Signed-off-by:
-
Sabrina Dubroca authored
Only supported for TLS1.2. Signed-off-by:
-
Jakub Kicinski authored
Donald Hunter says: ==================== tools/net/ynl: Add support for netlink-raw families This patchset adds support for netlink-raw families such as rtnetlink. Patch 1 fixes a typo in existing schemas Patch 2 contains the schema definition Patches 3 & 4 update the schema documentation Patches 5 - 9 extends ynl Patches 10 - 12 add several netlink-raw specs The netlink-raw schema is very similar to genetlink-legacy and I thought about making the changes there and symlinking to it. On balance I thought that might be problematic for accurate schema validation. rtnetlink doesn't seem to fit into unified or directional message enumeration models. It seems like an 'explicit' model would be useful, to force the schema author to specify the message ids directly. There is not yet support for notifications because ynl currently doesn't support defining 'event' properties on a 'do' operation. The message ids are shared so ops need to be both sync and async. I plan to look at this in a future patch. The link and route messages contain different nested attributes dependent on the type of link or route. Decoding these will need some kind of attr-space selection that uses the value of another attribute as the selector key. These nested attributes have been left with type 'binary' for now. ==================== Link: https://lore.kernel.org/r/20230825122756.7603-1-donald.hunter@gmail.comSigned-off-by:
-
Donald Hunter authored
Add schema for rt route with support for getroute, newroute and delroute. Routes can be dumped with filter attributes like this: ./tools/net/ynl/cli.py \ --spec Documentation/netlink/specs/rt_route.yaml \ --dump getroute --json '{"rtm-family": 2, "rtm-table": 254}' Signed-off-by:Donald Hunter <donald.hunter@gmail.com> Reviewed-by:
Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20230825122756.7603-13-donald.hunter@gmail.comSigned-off-by:
-
Donald Hunter authored
Add schema for rt link with support for newlink, dellink, getlink, setlink and getstats. A dummy link can be created like this: sudo ./tools/net/ynl/cli.py \ --spec Documentation/netlink/specs/rt_link.yaml \ --do newlink --create \ --json '{"ifname": "dummy0", "linkinfo": {"kind": "dummy"}}' For example, offload stats can be fetched like this: ./tools/net/ynl/cli.py \ --spec Documentation/netlink/specs/rt_link.yaml \ --dump getstats --json '{ "filter-mask": 8 }' Signed-off-by: -
Donald Hunter authored
Add schema for rt addr with support for: - newaddr, deladdr, getaddr (dump) Signed-off-by: -
Donald Hunter authored
Add support for using NLM_F_REPLACE, _EXCL, _CREATE and _APPEND flags in requests. Signed-off-by:
-
Donald Hunter authored
Add support for the 'array-nest' attribute type that is used by several netlink-raw families. Signed-off-by:
-
Donald Hunter authored
Refactor the ynl code to encapsulate protocol specifics into NetlinkProtocol and GenlProtocol. Signed-off-by:
-
Donald Hunter authored
Move decode_fixed_header into YnlFamily and add a _fixed_header_size method to allow extack decoding to skip the fixed header. Signed-off-by:
-
Donald Hunter authored
Add a SpecMcastGroup class to the nlspec lib. Signed-off-by:
-
Donald Hunter authored
Add a doc page for netlink-raw that describes the schema attributes needed for netlink-raw. Signed-off-by:
-
Donald Hunter authored
Add documentation for recently added genetlink-legacy schema attributes. Remove statements about 'work in progress' and 'todo'. Signed-off-by:
-
Donald Hunter authored
This schema is largely a copy of the genetlink-legacy schema with the following modifications: - change the schema id to netlink-raw - add a top-level protonum property, e.g. 0 (for NETLINK_ROUTE) - change the protocol enumeration to netlink-raw, removing the genetlink options. - replace doc references to generic netlink with raw netlink - add a value property to mcast-group definitions Signed-off-by:
-
Donald Hunter authored
Fix typo verion -> version in genetlink-c and genetlink-legacy. Signed-off-by:
-
Jakub Kicinski authored
Saeed Mahameed says: ==================== {devlink,mlx5}: Add port function attributes for ipsec From Dima: Introduce hypervisor-level control knobs to set the functionality of PCI VF devices passed through to guests. The administrator of a hypervisor host may choose to change the settings of a port function from the defaults configured by the device firmware. The software stack has two types of IPsec offload - crypto and packet. Specifically, the ip xfrm command has sub-commands for "state" and "policy" that have an "offload" parameter. With ip xfrm state, both crypto and packet offload types are supported, while ip xfrm policy can only be offloaded in packet mode. The series introduces two new boolean attributes of a port function: ipsec_crypto and ipsec_packet. The goal is to provide a similar level of granularity for controlling VF IPsec offload capabilities, which would be aligned with the software model. This will allow users to decide if they want both types of offload enabled for a VF, just one of them, or none at all (which is the default). At a high level, the difference between the two knobs is that with ipsec_crypto, only XFRM state can be offloaded. Specifically, only the crypto operation (Encrypt/Decrypt) is offloaded. With ipsec_packet, both XFRM state and policy can be offloaded. Furthermore, in addition to crypto operation offload, IPsec encapsulation is also offloaded. For XFRM state, choosing between crypto and packet offload types is possible. From the HW perspective, different resources may be required for each offload type. Examples of when a user prefers to enable IPsec packet offload for a VF when using switchdev mode: $ devlink port show pci/0000:06:00.0/1 pci/0000:06:00.0/1: type eth netdev enp6s0pf0vf0 flavour pcivf pfnum 0 vfnum 0 function: hw_addr 00:00:00:00:00:00 roce enable migratable disable ipsec_crypto disable ipsec_packet disable $ devlink port function set pci/0000:06:00.0/1 ipsec_packet enable $ devlink port show pci/0000:06:00.0/1 pci/0000:06:00.0/1: type eth netdev enp6s0pf0vf0 flavour pcivf pfnum 0 vfnum 0 function: hw_addr 00:00:00:00:00:00 roce enable migratable disable ipsec_crypto disable ipsec_packet enable This enables the corresponding IPsec capability of the function before it's enumerated, so when the driver reads the capability from the device firmware, it is enabled. The driver is then able to configure corresponding features and ops of the VF net device to support IPsec state and policy offloading. v2: https://lore.kernel.org/netdev/20230421104901.897946-1-dchumak@nvidia.com/ ==================== Link: https://lore.kernel.org/r/20230825062836.103744-1-saeed@kernel.orgSigned-off-by: -
Dima Chumak authored
Implement devlink port function commands to enable / disable IPsec packet offloads. This is used to control the IPsec capability of the device. When ipsec_offload is enabled for a VF, it prevents adding IPsec packet offloads on the PF, because the two cannot be active simultaneously due to HW constraints. Conversely, if there are any active IPsec packet offloads on the PF, it's not allowed to enable ipsec_packet on a VF, until PF IPsec offloads are cleared. Signed-off-by:
Dima Chumak <dchumak@nvidia.com> Signed-off-by:
Leon Romanovsky <leonro@nvidia.com> Signed-off-by:
Saeed Mahameed <saeedm@nvidia.com> Link: https://lore.kernel.org/r/20230825062836.103744-9-saeed@kernel.orgSigned-off-by:
-
Dima Chumak authored
Implement devlink port function commands to enable / disable IPsec crypto offloads. This is used to control the IPsec capability of the device. When ipsec_crypto is enabled for a VF, it prevents adding IPsec crypto offloads on the PF, because the two cannot be active simultaneously due to HW constraints. Conversely, if there are any active IPsec crypto offloads on the PF, it's not allowed to enable ipsec_crypto on a VF, until PF IPsec offloads are cleared. Signed-off-by:
-
Leon Romanovsky authored
mlx5 HW can't perform IPsec offload operation simultaneously both on PF and VFs at the same time. While the previous patches added devlink knobs to change IPsec capabilities dynamically, there is a need to add a logic to block such IPsec capabilities for the cases when IPsec is already configured. Signed-off-by:
-
Leon Romanovsky authored
Add hardware definitions to allow to control IPSec capabilities. Signed-off-by:
-
Leon Romanovsky authored
In the commit 366e4624 ("net/mlx5e: Make IPsec offload work together with eswitch and TC"), new API to block IPsec vs. TC creation was introduced. Internally, that API used devlink lock to avoid races with userspace, but it is not really needed as dev->priv.eswitch is stable and can't be changed. So remove dependency on devlink lock and move block encap code back to its original place. Signed-off-by:
-
Leon Romanovsky authored
There is no need in holding devlink lock as it gives nothing compared to already used write mode_lock. Signed-off-by:
-
Dima Chumak authored
Expose port function commands to enable / disable IPsec packet offloads, this is used to control the port IPsec capabilities. When IPsec packet is disabled for a function of the port (default), function cannot offload IPsec packet operations (encapsulation and XFRM policy offload). When enabled, IPsec packet operations can be offloaded by the function of the port, which includes crypto operation (Encrypt/Decrypt), IPsec encapsulation and XFRM state and policy offload. Example of a PCI VF port which supports IPsec packet offloads: $ devlink port show pci/0000:06:00.0/1 pci/0000:06:00.0/1: type eth netdev enp6s0pf0vf0 flavour pcivf pfnum 0 vfnum 0 function: hw_addr 00:00:00:00:00:00 roce enable ipsec_packet disable $ devlink port function set pci/0000:06:00.0/1 ipsec_packet enable $ devlink port show pci/0000:06:00.0/1 pci/0000:06:00.0/1: type eth netdev enp6s0pf0vf0 flavour pcivf pfnum 0 vfnum 0 function: hw_addr 00:00:00:00:00:00 roce enable ipsec_packet enable Signed-off-by:Jiri Pirko <jiri@nvidia.com> Link: https://lore.kernel.org/r/20230825062836.103744-3-saeed@kernel.orgSigned-off-by:
-
Dima Chumak authored
Expose port function commands to enable / disable IPsec crypto offloads, this is used to control the port IPsec capabilities. When IPsec crypto is disabled for a function of the port (default), function cannot offload any IPsec crypto operations (Encrypt/Decrypt and XFRM state offloading). When enabled, IPsec crypto operations can be offloaded by the function of the port. Example of a PCI VF port which supports IPsec crypto offloads: $ devlink port show pci/0000:06:00.0/1 pci/0000:06:00.0/1: type eth netdev enp6s0pf0vf0 flavour pcivf pfnum 0 vfnum 0 function: hw_addr 00:00:00:00:00:00 roce enable ipsec_crypto disable $ devlink port function set pci/0000:06:00.0/1 ipsec_crypto enable $ devlink port show pci/0000:06:00.0/1 pci/0000:06:00.0/1: type eth netdev enp6s0pf0vf0 flavour pcivf pfnum 0 vfnum 0 function: hw_addr 00:00:00:00:00:00 roce enable ipsec_crypto enable Signed-off-by:
-
- 27 Aug, 2023 11 commits
-
-
David S. Miller authored
MD Danish Anwar says: ==================== Introduce IEP driver and packet timestamping support This series introduces Industrial Ethernet Peripheral (IEP) driver to support timestamping of ethernet packets and thus support PTP and PPS for PRU ICSSG ethernet ports. This series also adds 10M full duplex support for ICSSG ethernet driver. There are two IEP instances. IEP0 is used for packet timestamping while IEP1 is used for 10M full duplex support. This is v7 of the series [v1]. It addresses comments made on [v6]. This series is based on linux-next(#next-20230823). Changes from v6 to v7: *) Dropped blank line in example section of patch 1. *) Patch 1 previously had three examples, removed two examples and kept only one example as asked by Krzysztof. *) Added Jacob Keller's RB tag in patch 5. *) Dropped Roger's RB tags from the patches that he has authored (Patch 3 and 4) Changes from v5 to v6: *) Added description of IEP in commit messages of patch 2 as asked by Rob. *) Described the items constraints properly for iep property in patch 2 as asked by Rob. *) Added Roger and Simon's RB tags. Changes from v4 to v5: *) Added comments on why we are using readl / writel instead of regmap_read() / write() in icss_iep_gettime() / settime() APIs as asked by Roger. *) Added Conor's RB tag in patch 1 and 2. Change from v3 to v4: *) Changed compatible in iep dt bindings. Now each SoC has their own compatible in the binding with "ti,am654-icss-iep" as a fallback as asked by Conor. *) Addressed Andew's comments and removed helper APIs icss_iep_readl() / writel(). Now the settime/gettime APIs directly use readl() / writel(). *) Moved selecting TI_ICSS_IEP in Kconfig from patch 3 to patch 4. *) Removed forward declaration of icss_iep_of_match in patch 3. *) Replaced use of of_device_get_match_data() to device_get_match_data() in patch 3. *) Removed of_match_ptr() from patch 3 as it is not needed. Changes from v2 to v3: *) Addressed Roger's comment and moved IEP1 related changes in patch 5. *) Addressed Roger's comment and moved icss_iep.c / .h changes from patch 4 to patch 3. *) Added support for multiple timestamping in patch 4 as asked by Roger. *) Addressed Andrew's comment and added comment in case SPEED_10 in icssg_config_ipg() API. *) Kept compatible as "ti,am654-icss-iep" for all TI K3 SoCs Changes from v1 to v2: *) Addressed Simon's comment to fix reverse xmas tree declaration. Some APIs in patch 3 and 4 were not following reverse xmas tree variable declaration. Fixed it in this version. *) Addressed Conor's comments and removed unsupported SoCs from compatible comment in patch 1. *) Addded patch 2 which was not part of v1. Patch 2, adds IEP node to dt bindings for ICSSG. [v1] https://lore.kernel.org/all/20230803110153.3309577-1-danishanwar@ti.com/ [v2] https://lore.kernel.org/all/20230807110048.2611456-1-danishanwar@ti.com/ [v3] https://lore.kernel.org/all/20230809114906.21866-1-danishanwar@ti.com/ [v4] https://lore.kernel.org/all/20230814100847.3531480-1-danishanwar@ti.com/ [v5] https://lore.kernel.org/all/20230817114527.1585631-1-danishanwar@ti.com/ [v6] https://lore.kernel.org/all/20230823113254.292603-1-danishanwar@ti.com/ ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Grygorii Strashko authored
For AM65x SR2.0 it's required to enable IEP1 in raw 64bit mode which is used by PRU FW to monitor the link and apply w/a for 10M link issue. Note. No public errata available yet. Without this w/a the PRU FW will stuck if link state changes under TX traffic pressure. Hence, add support for 10M full duplex for AM65x SR2.0: - add new IEP API to enable IEP, but without PTP support - add pdata quirk_10m_link_issue to enable 10M link issue w/a. Signed-off-by:
Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by:
Vignesh Raghavendra <vigneshr@ti.com> Reviewed-by:
Roger Quadros <rogerq@kernel.org> Reviewed-by:
Simon Horman <horms@kernel.org> Reviewed-by:
MD Danish Anwar <danishanwar@ti.com> Signed-off-by:
-
Roger Quadros authored
Add packet timestamping TS and PTP PHC clock support. For AM65x and AM64x: - IEP1 is not used - IEP0 is configured in shadow mode with 1ms cycle and shared between Linux and FW. It provides time and TS in number cycles, so special conversation in ns is required. - IEP0 shared between PRUeth ports. - IEP0 supports PPS, periodic output. - IEP0 settime() and enabling PPS required FW interraction. - RX TS provided with each packet in CPPI5 descriptor. - TX TS returned through separate ICSSG hw queues for each port. TX TS readiness is signaled by INTC IRQ. Only one packet at time can be requested for TX TS. Signed-off-by:
Roger Quadros <rogerq@ti.com> Co-developed-by:
-
Roger Quadros authored
Add a driver for Industrial Ethernet Peripheral (IEP) block of PRUSS to support timestamping of ethernet packets and thus support PTP and PPS for PRU ethernet ports. Signed-off-by:
Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by:
Murali Karicheri <m-karicheri2@ti.com> Signed-off-by:
-
MD Danish Anwar authored
Add IEP property in ICSSG hardware DT binding document. ICSSG uses IEP (Industrial Ethernet Peripheral) to support timestamping of ethernet packets, PTP and PPS. Reviewed-by:
Conor Dooley <conor.dooley@microchip.com> Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
MD Danish Anwar authored
Add a DT binding document for the ICSS Industrial Ethernet Peripheral(IEP) hardware. IEP supports packet timestamping, PTP and PPS. Reviewed-by:
-
David S. Miller authored
Pieter Jansen van Vuuren says: ==================== sfc: introduce eth, ipv4 and ipv6 pedit offloads This set introduces mac source and destination pedit set action offloads. It also adds offload for ipv4 ttl and ipv6 hop limit pedit set action as well pedit add actions that would result in the same semantics as decrementing the ttl and hop limit. v2: - fix 'efx_tc_mangle' kdoc which was orphaned when adding 'efx_tc_pedit_add'. - add description of 'match' in 'efx_tc_mangle' kdoc. - correct some inconsistent kdoc indentation. v1: https://lore.kernel.org/netdev/20230823111725.28090-1-pieter.jansen-van-vuuren@amd.com/ ==================== Reviewed-by:
-
Pieter Jansen van Vuuren authored
Extend the pedit add actions to handle this case for ipv6. Similar to ipv4 dec ttl, decrementing ipv6 hop limit can be achieved by adding 0xff to the hop limit field. Co-developed-by:
Edward Cree <ecree.xilinx@gmail.com> Signed-off-by:
Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com> Signed-off-by:
-
Pieter Jansen van Vuuren authored
Introduce pedit add actions and use it to achieve decrement ttl offload. Decrement ttl can be achieved by adding 0xff to the ttl field. Co-developed-by:
-
Pieter Jansen van Vuuren authored
Offload pedit set ipv6 hop limit, where the hop limit has already been matched and the new value is one less, by translating it to a decrement. Co-developed-by:
-
Pieter Jansen van Vuuren authored
Offload pedit set ipv4 ttl field, where the ttl field has already been matched and the new value is one less, by translating it to a decrement. Co-developed-by:
-
