- 25 Mar, 2013 10 commits
-
-
Volokh Konstantin authored
Case: In AdLink MPG24 there is bt878 exists (it captures one frame of all video inputs), Video Signal for it one transmits through tw2804 chip, so we can't control ADC (shut on/off) on tw2804, as some another can use bttv capture way. Signed-off-by:
Volokh Konstantin <volokh84@gmail.com> Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Chen Gang authored
For NUL terminated string, need always set '\0' in the end. Signed-off-by:
Chen Gang <gang.chen@asianux.com> Signed-off-by:
-
Sachin Kamat authored
version.h header inclusion is not necessary as detected by versioncheck. Signed-off-by:
Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by:
-
Hans Verkuil authored
Using two separate tables to setup the registers for 50 or 60 hz is better than the non-const table that is filled in at runtime. Signed-off-by:
-
Hans Verkuil authored
The go7007 driver would continue during probe if no firmware could be loaded. Without firmware the probe() should return an error, so do that. Also move the registration of devices to the end of the probe() sequence: once devices appear the full driver functionality should be available. Signed-off-by:
-
Hans Verkuil authored
Include the patch required to add support for the go7007 to saa7134. To be applied once the driver is moved out of staging. Signed-off-by:
-
Hans Verkuil authored
The only thing missing after this to make the Sensoray model 614 board work is to hook it up to the saa7134 driver, but that will have to wait until this driver goes out of staging. Signed-off-by:
Pete Eberlein <pete@sensoray.com> [hans.verkuil@cisco.com: updated to make it merge correctly] Signed-off-by:
-
Sachin Kamat authored
version.h header inclusion is not necessary as detected by versioncheck. Signed-off-by:
-
Frank Schaefer authored
Signed-off-by:
Frank Schäfer <fschaefer.oss@googlemail.com> Signed-off-by:
-
Frank Schaefer authored
Signed-off-by:
-
- 24 Mar, 2013 30 commits
-
-
Hans Verkuil authored
Update the brighness range depending on the selected input. Useful for testing control range events. Signed-off-by:
-
Mauro Carvalho Chehab authored
A patchset applied earlier changed v4l2_tuner struct parameter at vidioc_s_tuner to const. Do this change at sony_btf_mpx_s_tuner(), in order to remove this warning: drivers/media/i2c/sony-btf-mpx.c:335:2: warning: initialization from incompatible pointer type [enabled by default] drivers/media/i2c/sony-btf-mpx.c:335:2: warning: (near initialization for 'sony_btf_mpx_tuner_ops.s_tuner') [enabled by default] Cc: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: -
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
This API is now obsolete and can be removed. Signed-off-by:
-
Hans Verkuil authored
This API is no longer used by any driver and so can be removed from the documentation. Signed-off-by:
-
Hans Verkuil authored
These ioctls are no longer used by any drivers, so remove them. [mchehab@redhat.com: Fix merge conflict] Signed-off-by:
-
Hans Verkuil authored
These ops are no longer used, so it's time to remove them. Signed-off-by:
-
Hans Verkuil authored
It's no longer used, so it can now be removed. Signed-off-by:
-
Hans Verkuil authored
Taken from the 0.9.8-5 version of the out-of-tree wis-go7007 driver. Signed-off-by:
-
Hans Verkuil authored
Taken from the 0.9.8-5 version of the out-of-tree wis-go7007 driver. Signed-off-by:
-
Hans Verkuil authored
The firmware is always the same, so drop it from the board configs. Also make the board configs const. Signed-off-by:
-
Hans Verkuil authored
Actually it's called "Group of VOP" start code in MPEG4 terminology. Taken from the 0.9.8-5 version of the out-of-tree wis-go7007 driver. Signed-off-by:
-
Hans Verkuil authored
But now as a proper standard MPEG control. Signed-off-by:
-
Volokh Konstantin authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Add support for the other devices that need to load the boot firmware. All firmware files are now placed in a single go7007 directory. Also remove the device_extension_s stuff: this is clearly a left-over from the olden days. Signed-off-by:
-
Hans Verkuil authored
All s2250 names are renamed to go7007. This will be the generic go7007 firmware loader for any go7007 device, not just for the s2250/1. Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Remove these dummy cropping functions: cropping was never implemented. Signed-off-by:
-
Hans Verkuil authored
Do not allocate it, but just embed in the go7007 struct. Signed-off-by:
-
Hans Verkuil authored
Convert this driver to videobuf2 and core locking. Signed-off-by:
-
Hans Verkuil authored
Remove struct go7007_file: all fields contained in that struct are moved to the go7007 struct since they are really global values. The lock has just been deleted (what's the point of a per-fh lock??). Signed-off-by:
-
Hans Verkuil authored
The s_crystal_freq operation has to be called for the saa7115 to set up the audio clock correctly. Signed-off-by:
-
Hans Verkuil authored
There really is no need to split out the board IDs for each tuner. That's what the tuner_type is for, after all. Signed-off-by:
-
Hans Verkuil authored
The go7007 produces elementary streams, so we shouldn't use the STREAM_TYPE control, since that is for multiplexed streams. Instead use V4L2_PIX_FMT_MPEG1/2/4. Initially set up all the values for MPEG-2 dvd-mode, and select the dvd_mode field if those values match that setup precisely. Clean up lots of obsolete code relating to the custom ioctls for the MPEG support. Signed-off-by:
-
Hans Verkuil authored
- The Adlink is initially detected as a sensor board, so the driver config is set up as if it was a sensor. Later the driver discovers that it really is a video capture card and that means that the driver configuration has to be updated for a PAL/NTSC capture card. - Setup the correct initial std based on the TV tuner type. - Remember the exact std the user selected, don't map it to STD_PAL or NTSC. - Use v4l2_disable_ioctl to disable ioctls based on the board config and drop a lot of checking code in each of those ioctls since that is no longer needed. - enum_input should use tvnorms to fill its std field. - configure the input, std and initial tuner frequency at driver initialization. - fix std handling in the s2250 driver. - the code handling scaling for devices without a scaler was broken. This is now fixed. - correctly set readbuffers and capability in g/s_parm. - remove the bogus test for capturemode in s_parm. - correctly implement enum_framesizes/intervals. Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
