- 11 Mar, 2024 16 commits
-
-
Alexei Starovoitov authored
bpf_arena_htab.h - hash table implemented as bpf program Signed-off-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20240308010812.89848-15-alexei.starovoitov@gmail.com
-
Alexei Starovoitov authored
bpf_arena_alloc.h - implements page_frag allocator as a bpf program. bpf_arena_list.h - doubly linked link list as a bpf program. Compiled as a bpf program and as native C code. Signed-off-by:
-
Alexei Starovoitov authored
Add unit tests for bpf_arena_alloc/free_pages() functionality and bpf_arena_common.h with a set of common helpers and macros that is used in this test and the following patches. Also modify test_loader that didn't support running bpf_prog_type_syscall programs. Signed-off-by:
-
Alexei Starovoitov authored
Introduce helper macro bpf_addr_space_cast() that emits: rX = rX instruction with off = BPF_ADDR_SPACE_CAST and encodes dest and src address_space-s into imm32. It's useful with older LLVM that doesn't emit this insn automatically. Signed-off-by:
Kumar Kartikeya Dwivedi <memxor@gmail.com> Link: https://lore.kernel.org/bpf/20240308010812.89848-12-alexei.starovoitov@gmail.com
-
Andrii Nakryiko authored
LLVM automatically places __arena variables into ".arena.1" ELF section. In order to use such global variables bpf program must include definition of arena map in ".maps" section, like: struct { __uint(type, BPF_MAP_TYPE_ARENA); __uint(map_flags, BPF_F_MMAPABLE); __uint(max_entries, 1000); /* number of pages */ __ulong(map_extra, 2ull << 44); /* start of mmap() region */ } arena SEC(".maps"); libbpf recognizes both uses of arena and creates single `struct bpf_map *` instance in libbpf APIs. ".arena.1" ELF section data is used as initial data image, which is exposed through skeleton and bpf_map__initial_value() to the user, if they need to tune it before the load phase. During load phase, this initial image is copied over into mmap()'ed region corresponding to arena, and discarded. Few small checks here and there had to be added to make sure this approach works with bpf_map__initial_value(), mostly due to hard-coded assumption that map->mmaped is set up with mmap() syscall and should be munmap()'ed. For arena, .arena.1 can be (much) smaller than maximum arena size, so this smaller data size has to be tracked separately. Given it is enforced that there is only one arena for entire bpf_object instance, we just keep it in a separate field. This can be generalized if necessary later. All global variables from ".arena.1" section are accessible from user space via skel->arena->name_of_var. For bss/data/rodata the skeleton/libbpf perform the following sequence: 1. addr = mmap(MAP_ANONYMOUS) 2. user space optionally modifies global vars 3. map_fd = bpf_create_map() 4. bpf_update_map_elem(map_fd, addr) // to store values into the kernel 5. mmap(addr, MAP_FIXED, map_fd) after step 5 user spaces see the values it wrote at step 2 at the same addresses arena doesn't support update_map_elem. Hence skeleton/libbpf do: 1. addr = malloc(sizeof SEC ".arena.1") 2. user space optionally modifies global vars 3. map_fd = bpf_create_map(MAP_TYPE_ARENA) 4. real_addr = mmap(map->map_extra, MAP_SHARED | MAP_FIXED, map_fd) 5. memcpy(real_addr, addr) // this will fault-in and allocate pages At the end look and feel of global data vs __arena global data is the same from bpf prog pov. Another complication is: struct { __uint(type, BPF_MAP_TYPE_ARENA); } arena SEC(".maps"); int __arena foo; int bar; ptr1 = &foo; // relocation against ".arena.1" section ptr2 = &arena; // relocation against ".maps" section ptr3 = &bar; // relocation against ".bss" section Fo the kernel ptr1 and ptr2 has point to the same arena's map_fd while ptr3 points to a different global array's map_fd. For the verifier: ptr1->type == unknown_scalar ptr2->type == const_ptr_to_map ptr3->type == ptr_to_map_value After verification, from JIT pov all 3 ptr-s are normal ld_imm64 insns. Signed-off-by:Quentin Monnet <quentin@isovalent.com> Link: https://lore.kernel.org/bpf/20240308010812.89848-11-alexei.starovoitov@gmail.com
-
Alexei Starovoitov authored
Teach bpftool to recognize arena map type. Signed-off-by:
-
Alexei Starovoitov authored
mmap() bpf_arena right after creation, since the kernel needs to remember the address returned from mmap. This is user_vm_start. LLVM will generate bpf_arena_cast_user() instructions where necessary and JIT will add upper 32-bit of user_vm_start to such pointers. Fix up bpf_map_mmap_sz() to compute mmap size as map->value_size * map->max_entries for arrays and PAGE_SIZE * map->max_entries for arena. Don't set BTF at arena creation time, since it doesn't support it. Signed-off-by:
-
Alexei Starovoitov authored
Add __arg_arena to bpf_helpers.h Signed-off-by:
-
Alexei Starovoitov authored
In global bpf functions recognize btf_decl_tag("arg:arena") as PTR_TO_ARENA. Note, when the verifier sees: __weak void foo(struct bar *p) it recognizes 'p' as PTR_TO_MEM and 'struct bar' has to be a struct with scalars. Hence the only way to use arena pointers in global functions is to tag them with "arg:arena". Signed-off-by: -
Alexei Starovoitov authored
rY = addr_space_cast(rX, 0, 1) tells the verifier that rY->type = PTR_TO_ARENA. Any further operations on PTR_TO_ARENA register have to be in 32-bit domain. The verifier will mark load/store through PTR_TO_ARENA with PROBE_MEM32. JIT will generate them as kern_vm_start + 32bit_addr memory accesses. rY = addr_space_cast(rX, 1, 0) tells the verifier that rY->type = unknown scalar. If arena->map_flags has BPF_F_NO_USER_CONV set then convert cast_user to mov32 as well. Otherwise JIT will convert it to: rY = (u32)rX; if (rY) rY |= arena->user_vm_start & ~(u64)~0U; Signed-off-by: -
Alexei Starovoitov authored
LLVM generates bpf_addr_space_cast instruction while translating pointers between native (zero) address space and __attribute__((address_space(N))). The addr_space=1 is reserved as bpf_arena address space. rY = addr_space_cast(rX, 0, 1) is processed by the verifier and converted to normal 32-bit move: wX = wY rY = addr_space_cast(rX, 1, 0) has to be converted by JIT: aux_reg = upper_32_bits of arena->user_vm_start aux_reg <<= 32 wX = wY // clear upper 32 bits of dst register if (wX) // if not zero add upper bits of user_vm_start wX |= aux_reg JIT can do it more efficiently: mov dst_reg32, src_reg32 // 32-bit move shl dst_reg, 32 or dst_reg, user_vm_start rol dst_reg, 32 xor r11, r11 test dst_reg32, dst_reg32 // check if lower 32-bit are zero cmove r11, dst_reg // if so, set dst_reg to zero // Intel swapped src/dst register encoding in CMOVcc Signed-off-by:
Eduard Zingerman <eddyz87@gmail.com> Link: https://lore.kernel.org/bpf/20240308010812.89848-5-alexei.starovoitov@gmail.com
-
Alexei Starovoitov authored
Add support for [LDX | STX | ST], PROBE_MEM32, [B | H | W | DW] instructions. They are similar to PROBE_MEM instructions with the following differences: - PROBE_MEM has to check that the address is in the kernel range with src_reg + insn->off >= TASK_SIZE_MAX + PAGE_SIZE check - PROBE_MEM doesn't support store - PROBE_MEM32 relies on the verifier to clear upper 32-bit in the register - PROBE_MEM32 adds 64-bit kern_vm_start address (which is stored in %r12 in the prologue) Due to bpf_arena constructions such %r12 + %reg + off16 access is guaranteed to be within arena virtual range, so no address check at run-time. - PROBE_MEM32 allows STX and ST. If they fault the store is a nop. When LDX faults the destination register is zeroed. Signed-off-by:
-
Alexei Starovoitov authored
LLVM generates rX = addr_space_cast(rY, dst_addr_space, src_addr_space) instruction when pointers in non-zero address space are used by the bpf program. Recognize this insn in uapi and in bpf disassembler. Signed-off-by:
-
Alexei Starovoitov authored
Introduce bpf_arena, which is a sparse shared memory region between the bpf program and user space. Use cases: 1. User space mmap-s bpf_arena and uses it as a traditional mmap-ed anonymous region, like memcached or any key/value storage. The bpf program implements an in-kernel accelerator. XDP prog can search for a key in bpf_arena and return a value without going to user space. 2. The bpf program builds arbitrary data structures in bpf_arena (hash tables, rb-trees, sparse arrays), while user space consumes it. 3. bpf_arena is a "heap" of memory from the bpf program's point of view. The user space may mmap it, but bpf program will not convert pointers to user base at run-time to improve bpf program speed. Initially, the kernel vm_area and user vma are not populated. User space can fault in pages within the range. While servicing a page fault, bpf_arena logic will insert a new page into the kernel and user vmas. The bpf program can allocate pages from that region via bpf_arena_alloc_pages(). This kernel function will insert pages into the kernel vm_area. The subsequent fault-in from user space will populate that page into the user vma. The BPF_F_SEGV_ON_FAULT flag at arena creation time can be used to prevent fault-in from user space. In such a case, if a page is not allocated by the bpf program and not present in the kernel vm_area, the user process will segfault. This is useful for use cases 2 and 3 above. bpf_arena_alloc_pages() is similar to user space mmap(). It allocates pages either at a specific address within the arena or allocates a range with the maple tree. bpf_arena_free_pages() is analogous to munmap(), which frees pages and removes the range from the kernel vm_area and from user process vmas. bpf_arena can be used as a bpf program "heap" of up to 4GB. The speed of bpf program is more important than ease of sharing with user space. This is use case 3. In such a case, the BPF_F_NO_USER_CONV flag is recommended. It will tell the verifier to treat the rX = bpf_arena_cast_user(rY) instruction as a 32-bit move wX = wY, which will improve bpf prog performance. Otherwise, bpf_arena_cast_user is translated by JIT to conditionally add the upper 32 bits of user vm_start (if the pointer is not NULL) to arena pointers before they are stored into memory. This way, user space sees them as valid 64-bit pointers. Diff https://github.com/llvm/llvm-project/pull/84410 enables LLVM BPF backend generate the bpf_addr_space_cast() instruction to cast pointers between address_space(1) which is reserved for bpf_arena pointers and default address space zero. All arena pointers in a bpf program written in C language are tagged as __attribute__((address_space(1))). Hence, clang provides helpful diagnostics when pointers cross address space. Libbpf and the kernel support only address_space == 1. All other address space identifiers are reserved. rX = bpf_addr_space_cast(rY, /* dst_as */ 1, /* src_as */ 0) tells the verifier that rX->type = PTR_TO_ARENA. Any further operations on PTR_TO_ARENA register have to be in the 32-bit domain. The verifier will mark load/store through PTR_TO_ARENA with PROBE_MEM32. JIT will generate them as kern_vm_start + 32bit_addr memory accesses. The behavior is similar to copy_from_kernel_nofault() except that no address checks are necessary. The address is guaranteed to be in the 4GB range. If the page is not present, the destination register is zeroed on read, and the operation is ignored on write. rX = bpf_addr_space_cast(rY, 0, 1) tells the verifier that rX->type = unknown scalar. If arena->map_flags has BPF_F_NO_USER_CONV set, then the verifier converts such cast instructions to mov32. Otherwise, JIT will emit native code equivalent to: rX = (u32)rY; if (rY) rX |= clear_lo32_bits(arena->user_vm_start); /* replace hi32 bits in rX */ After such conversion, the pointer becomes a valid user pointer within bpf_arena range. The user process can access data structures created in bpf_arena without any additional computations. For example, a linked list built by a bpf program can be walked natively by user space. Signed-off-by:
Barret Rhoden <brho@google.com> Link: https://lore.kernel.org/bpf/20240308010812.89848-2-alexei.starovoitov@gmail.com
-
Andrii Nakryiko authored
We already have kprobe and fentry benchmarks. Let's add kretprobe and fexit ones for completeness. Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Jiri Olsa <jolsa@kernel.org> Link: https://lore.kernel.org/bpf/20240309005124.3004446-1-andrii@kernel.org
-
Alexei Starovoitov authored
ioremap_page_range() should be used for ranges within vmalloc range only. The vmalloc ranges are allocated by get_vm_area(). PCI has "resource" allocator that manages PCI_IOBASE, IO_SPACE_LIMIT address range, hence introduce vmap_page_range() to be used exclusively to map pages in PCI address space. Fixes: 3e49a866 ("mm: Enforce VM_IOREMAP flag and range in ioremap_page_range.") Reported-by:
Miguel Ojeda <ojeda@kernel.org> Signed-off-by:
Christoph Hellwig <hch@lst.de> Tested-by:
-
- 09 Mar, 2024 1 commit
-
-
Puranjay Mohan authored
We used bpf_prog_pack to aggregate bpf programs into huge page to relieve the iTLB pressure on the system. This was merged for ARM64[1] We can apply it to bpf trampoline as well. This would increase the preformance of fentry and struct_ops programs. [1] https://lore.kernel.org/bpf/20240228141824.119877-1-puranjay12@gmail.com/Signed-off-by:
Puranjay Mohan <puranjay12@gmail.com> Reviewed-by:
Pu Lehui <pulehui@huawei.com> Message-ID: <20240304202803.31400-1-puranjay12@gmail.com> Signed-off-by:
-
- 08 Mar, 2024 4 commits
-
-
Alexei Starovoitov authored
Toke Høiland-Jørgensen says: ==================== Fix hash bucket overflow checks for 32-bit arches Syzbot managed to trigger a crash by creating a DEVMAP_HASH map with a large number of buckets because the overflow check relies on well-defined behaviour that is only correct on 64-bit arches. Fix the overflow checks to happen before values are rounded up in all the affected map types. v3: - Keep the htab->n_buckets > U32_MAX / sizeof(struct bucket) check - Use 1UL << 31 instead of U32_MAX / 2 + 1 as the constant to check against - Add patch to fix stackmap.c v2: - Fix off-by-one error in overflow check - Apply the same fix to hashtab, where the devmap_hash code was copied from (John) Toke Høiland-Jørgensen (3): bpf: Fix DEVMAP_HASH overflow check on 32-bit arches bpf: Fix hashtab overflow check on 32-bit arches bpf: Fix stackmap overflow check on 32-bit arches kernel/bpf/devmap.c | 11 ++++++----- kernel/bpf/hashtab.c | 14 +++++++++----- kernel/bpf/stackmap.c | 9 ++++++--- 3 files changed, 21 insertions(+), 13 deletions(-) ==================== Link: https://lore.kernel.org/r/20240307120340.99577-1-toke@redhat.comSigned-off-by:
-
Toke Høiland-Jørgensen authored
The stackmap code relies on roundup_pow_of_two() to compute the number of hash buckets, and contains an overflow check by checking if the resulting value is 0. However, on 32-bit arches, the roundup code itself can overflow by doing a 32-bit left-shift of an unsigned long value, which is undefined behaviour, so it is not guaranteed to truncate neatly. This was triggered by syzbot on the DEVMAP_HASH type, which contains the same check, copied from the hashtab code. The commit in the fixes tag actually attempted to fix this, but the fix did not account for the UB, so the fix only works on CPUs where an overflow does result in a neat truncation to zero, which is not guaranteed. Checking the value before rounding does not have this problem. Fixes: 6183f4d3 ("bpf: Check for integer overflow when using roundup_pow_of_two()") Signed-off-by:
Toke Høiland-Jørgensen <toke@redhat.com> Reviewed-by:
Bui Quang Minh <minhquangbui99@gmail.com> Message-ID: <20240307120340.99577-4-toke@redhat.com> Signed-off-by:
-
Toke Høiland-Jørgensen authored
The hashtab code relies on roundup_pow_of_two() to compute the number of hash buckets, and contains an overflow check by checking if the resulting value is 0. However, on 32-bit arches, the roundup code itself can overflow by doing a 32-bit left-shift of an unsigned long value, which is undefined behaviour, so it is not guaranteed to truncate neatly. This was triggered by syzbot on the DEVMAP_HASH type, which contains the same check, copied from the hashtab code. So apply the same fix to hashtab, by moving the overflow check to before the roundup. Fixes: daaf427c ("bpf: fix arraymap NULL deref and missing overflow and zero size checks") Signed-off-by:
-
Toke Høiland-Jørgensen authored
The devmap code allocates a number hash buckets equal to the next power of two of the max_entries value provided when creating the map. When rounding up to the next power of two, the 32-bit variable storing the number of buckets can overflow, and the code checks for overflow by checking if the truncated 32-bit value is equal to 0. However, on 32-bit arches the rounding up itself can overflow mid-way through, because it ends up doing a left-shift of 32 bits on an unsigned long value. If the size of an unsigned long is four bytes, this is undefined behaviour, so there is no guarantee that we'll end up with a nice and tidy 0-value at the end. Syzbot managed to turn this into a crash on arm32 by creating a DEVMAP_HASH with max_entries > 0x80000000 and then trying to update it. Fix this by moving the overflow check to before the rounding up operation. Fixes: 6f9d451a ("xdp: Add devmap_hash map type for looking up devices by hashed index") Link: https://lore.kernel.org/r/000000000000ed666a0611af6818@google.com Reported-and-tested-by: syzbot+8cd36f6b65f3cafd400a@syzkaller.appspotmail.com Signed-off-by:
-
- 07 Mar, 2024 7 commits
-
-
Martin KaFai Lau authored
Alexei Starovoitov says: ==================== These are bpf_arena prerequisite patches. Useful on its own. Alexei Starovoitov (5): bpf: Allow kfuncs return 'void *' bpf: Recognize '__map' suffix in kfunc arguments bpf: Plumb get_unmapped_area() callback into bpf_map_ops libbpf: Allow specifying 64-bit integers in map BTF. bpf: Tell bpf programs kernel's PAGE_SIZE ==================== Signed-off-by:Martin KaFai Lau <martin.lau@kernel.org>
-
Alexei Starovoitov authored
vmlinux BTF includes all kernel enums. Add __PAGE_SIZE = PAGE_SIZE enum, so that bpf programs that include vmlinux.h can easily access it. Acked-by:
-
Andrii Nakryiko authored
It's not restricted to working with "internal" maps, it cares about any map that can be mmap'ed. Reflect that in more succinct and generic name. Signed-off-by:
-
Alexei Starovoitov authored
__uint() macro that is used to specify map attributes like: __uint(type, BPF_MAP_TYPE_ARRAY); __uint(map_flags, BPF_F_MMAPABLE); It is limited to 32-bit, since BTF_KIND_ARRAY has u32 "number of elements" field in "struct btf_array". Introduce __ulong() macro that allows specifying values bigger than 32-bit. In map definition "map_extra" is the only u64 field, so far. Signed-off-by:
-
Alexei Starovoitov authored
Subsequent patches introduce bpf_arena that imposes special alignment requirements on address selection. Acked-by:
-
Alexei Starovoitov authored
Recognize 'void *p__map' kfunc argument as 'struct bpf_map *p__map'. It allows kfunc to have 'void *' argument for maps, since bpf progs will call them as: struct { __uint(type, BPF_MAP_TYPE_ARENA); ... } arena SEC(".maps"); bpf_kfunc_with_map(... &arena ...); Underneath libbpf will load CONST_PTR_TO_MAP into the register via ld_imm64 insn. If kfunc was defined with 'struct bpf_map *' it would pass the verifier as well, but bpf prog would need to type cast the argument (void *)&arena, which is not clean. Acked-by: -
Alexei Starovoitov authored
Recognize return of 'void *' from kfunc as returning unknown scalar. Acked-by:
-
- 06 Mar, 2024 12 commits
-
-
Puranjay Mohan authored
The riscv BPF JIT doesn't emit proper kCFI prologues for BPF programs and struct_ops trampolines when CONFIG_CFI_CLANG is enabled. This causes CFI failures when calling BPF programs and can even crash the kernel due to invalid memory accesses. Example crash: root@rv-selftester:~/bpf# ./test_progs -a dummy_st_ops Unable to handle kernel paging request at virtual address ffffffff78204ffc Oops [#1] Modules linked in: bpf_testmod(OE) [....] CPU: 3 PID: 356 Comm: test_progs Tainted: P OE 6.8.0-rc1 #1 Hardware name: riscv-virtio,qemu (DT) epc : bpf_struct_ops_test_run+0x28c/0x5fc ra : bpf_struct_ops_test_run+0x26c/0x5fc epc : ffffffff82958010 ra : ffffffff82957ff0 sp : ff200000007abc80 gp : ffffffff868d6218 tp : ff6000008d87b840 t0 : 000000000000000f t1 : 0000000000000000 t2 : 000000002005793e s0 : ff200000007abcf0 s1 : ff6000008a90fee0 a0 : 0000000000000000 a1 : 0000000000000000 a2 : 0000000000000000 a3 : 0000000000000000 a4 : 0000000000000000 a5 : ffffffff868dba26 a6 : 0000000000000001 a7 : 0000000052464e43 s2 : 00007ffffc0a95f0 s3 : ff6000008a90fe80 s4 : ff60000084c24c00 s5 : ffffffff78205000 s6 : ff60000088750648 s7 : ff20000000035008 s8 : fffffffffffffff4 s9 : ffffffff86200610 s10: 0000000000000000 s11: 0000000000000000 t3 : ffffffff8483dc30 t4 : ffffffff8483dc10 t5 : ffffffff8483dbf0 t6 : ffffffff8483dbd0 status: 0000000200000120 badaddr: ffffffff78204ffc cause: 000000000000000d [<ffffffff82958010>] bpf_struct_ops_test_run+0x28c/0x5fc [<ffffffff805083ee>] bpf_prog_test_run+0x170/0x548 [<ffffffff805029c8>] __sys_bpf+0x2d2/0x378 [<ffffffff804ff570>] __riscv_sys_bpf+0x5c/0x120 [<ffffffff8000e8fe>] syscall_handler+0x62/0xe4 [<ffffffff83362df6>] do_trap_ecall_u+0xc6/0x27c [<ffffffff833822c4>] ret_from_exception+0x0/0x64 Code: b603 0109 b683 0189 b703 0209 8493 0609 157d 8d65 (a303) ffca ---[ end trace 0000000000000000 ]--- Kernel panic - not syncing: Fatal exception SMP: stopping secondary CPUs Implement proper kCFI prologues for the BPF programs and callbacks and drop __nocfi for riscv64. Fix the trampoline generation code to emit kCFI prologue when a struct_ops trampoline is being prepared. Signed-off-by:
Björn Töpel <bjorn@kernel.org> Link: https://lore.kernel.org/bpf/20240303170207.82201-2-puranjay12@gmail.com
-
Andrii Nakryiko authored
Eduard Zingerman says: ==================== libbpf: type suffixes and autocreate flag for struct_ops maps Tweak struct_ops related APIs to allow the following features: - specify version suffixes for stuct_ops map types; - share same BPF program between several map definitions with different local BTF types, assuming only maps with same kernel BTF type would be selected for load; - toggle autocreate flag for struct_ops maps; - automatically toggle autoload for struct_ops programs referenced from struct_ops maps, depending on autocreate status of the corresponding map; - use SEC("?.struct_ops") and SEC("?.struct_ops.link") to define struct_ops maps with autocreate == false after object open. This would allow loading programs like below: SEC("struct_ops/foo") int BPF_PROG(foo) { ... } SEC("struct_ops/bar") int BPF_PROG(bar) { ... } struct bpf_testmod_ops___v1 { int (*foo)(void); }; struct bpf_testmod_ops___v2 { int (*foo)(void); int (*bar)(void); }; /* Assume kernel type name to be 'test_ops' */ SEC(".struct_ops.link") struct test_ops___v1 map_v1 = { /* Program 'foo' shared by maps with * different local BTF type */ .foo = (void *)foo }; SEC(".struct_ops.link") struct test_ops___v2 map_v2 = { .foo = (void *)foo, .bar = (void *)bar }; Assuming the following tweaks are done before loading: /* to load v1 */ bpf_map__set_autocreate(skel->maps.map_v1, true); bpf_map__set_autocreate(skel->maps.map_v2, false); /* to load v2 */ bpf_map__set_autocreate(skel->maps.map_v1, false); bpf_map__set_autocreate(skel->maps.map_v2, true); Patch #8 ties autocreate and autoload flags for struct_ops maps and programs. Changelog: - v3 [3] -> v4: - changes for multiple styling suggestions from Andrii; - patch #5: libbpf log capture now happens for LIBBPF_INFO and LIBBPF_WARN messages and does not depend on verbosity flags (Andrii); - patch #6: fixed runtime crash caused by conflict with newly added test case struct_ops_multi_pages; - patch #7: fixed free of possibly uninitialized pointer (Daniel) - patch #8: simpler algorithm to detect which programs to autoload (Andrii); - patch #9: added assertions for autoload flag after object load (Andrii); - patch #12: DATASEC name rewrite in libbpf is now done inplace, no new strings added to BTF (Andrii); - patch #14: allow any printable characters in DATASEC names when kernel validates BTF (Andrii) - v2 [2] -> v3: - moved patch #8 logic to be fully done on load (requested by Andrii in offlist discussion); - in patch #9 added test case for shadow vars and autocreate/autoload interaction. - v1 [1] -> v2: - fixed memory leak in patch #1 (Kui-Feng); - improved error messages in patch #2 (Martin, Andrii); - in bad_struct_ops selftest from patch #6 added .test_2 map member setup (David); - added utility functions to capture libbpf log from selftests (David) - in selftests replaced usage of ...__open_and_load by separate calls to ..._open() and ..._load() (Andrii); - removed serial_... in selftest definitions (Andrii); - improved comments in selftest struct_ops_autocreate from patch #7 (David); - removed autoload toggling logic incompatible with shadow variables from bpf_map__set_autocreate(), instead struct_ops programs autoload property is computed at struct_ops maps load phase, see patch #8 (Kui-Feng, Martin, Andrii); - added support for SEC("?.struct_ops") and SEC("?.struct_ops.link") (Andrii). [1] https://lore.kernel.org/bpf/20240227204556.17524-1-eddyz87@gmail.com/ [2] https://lore.kernel.org/bpf/20240302011920.15302-1-eddyz87@gmail.com/ [3] https://lore.kernel.org/bpf/20240304225156.24765-1-eddyz87@gmail.com/ ==================== Link: https://lore.kernel.org/r/20240306104529.6453-1-eddyz87@gmail.comSigned-off-by: -
Eduard Zingerman authored
Two test cases to verify that '?' and other printable characters are allowed in BTF DATASEC names: - DATASEC with name "?.foo bar:buz" should be accepted; - type with name "?foo" should be rejected. Signed-off-by:
-
Eduard Zingerman authored
The intent is to allow libbpf to use SEC("?.struct_ops") to identify struct_ops maps that are optional, e.g. like in the following BPF code: SEC("?.struct_ops") struct test_ops optional_map = { ... }; Which yields the following BTF: ... [13] DATASEC '?.struct_ops' size=0 vlen=... ... To load such BTF libbpf rewrites DATASEC name before load. After this patch the rewrite won't be necessary. Signed-off-by: -
Eduard Zingerman authored
Check that "?.struct_ops" and "?.struct_ops.link" section names define struct_ops maps with autocreate == false after open. Signed-off-by:
-
Eduard Zingerman authored
Optional struct_ops maps are defined using question mark at the start of the section name, e.g.: SEC("?.struct_ops") struct test_ops optional_map = { ... }; This commit teaches libbpf to detect if kernel allows '?' prefix in datasec names, and if it doesn't then to rewrite such names by replacing '?' with '_', e.g.: DATASEC ?.struct_ops -> DATASEC _.struct_ops Signed-off-by: -
Eduard Zingerman authored
Allow using two new section names for struct_ops maps: - SEC("?.struct_ops") - SEC("?.struct_ops.link") To specify maps that have bpf_map->autocreate == false after open. Signed-off-by: -
Eduard Zingerman authored
The next patch would add two new section names for struct_ops maps. To make working with multiple struct_ops sections more convenient: - remove fields like elf_state->st_ops_{shndx,link_shndx}; - mark section descriptions hosting struct_ops as elf_sec_desc->sec_type == SEC_ST_OPS; After these changes struct_ops sections could be processed uniformly by iterating bpf_object->efile.secs entries. Signed-off-by: -
Eduard Zingerman authored
Check that autocreate flags of struct_ops map cause autoload of struct_ops corresponding programs: - when struct_ops program is referenced only from a map for which autocreate is set to false, that program should not be loaded; - when struct_ops program with autoload == false is set to be used from a map with autocreate == true using shadow var, that program should be loaded; - when struct_ops program is not referenced from any map object load should fail. Signed-off-by:
-
Eduard Zingerman authored
Automatically select which struct_ops programs to load depending on which struct_ops maps are selected for automatic creation. E.g. for the BPF code below: SEC("struct_ops/test_1") int BPF_PROG(foo) { ... } SEC("struct_ops/test_2") int BPF_PROG(bar) { ... } SEC(".struct_ops.link") struct test_ops___v1 A = { .foo = (void *)foo }; SEC(".struct_ops.link") struct test_ops___v2 B = { .foo = (void *)foo, .bar = (void *)bar, }; And the following libbpf API calls: bpf_map__set_autocreate(skel->maps.A, true); bpf_map__set_autocreate(skel->maps.B, false); The autoload would be enabled for program 'foo' and disabled for program 'bar'. During load, for each struct_ops program P, referenced from some struct_ops map M: - set P.autoload = true if M.autocreate is true for some M; - set P.autoload = false if M.autocreate is false for all M; - don't change P.autoload, if P is not referenced from any map. Do this after bpf_object__init_kern_struct_ops_maps() to make sure that shadow vars assignment is done. Signed-off-by: -
Eduard Zingerman authored
Check that bpf_map__set_autocreate() can be used to disable automatic creation for struct_ops maps. Signed-off-by:
-
Eduard Zingerman authored
When loading struct_ops programs kernel requires BTF id of the struct_ops type and member index for attachment point inside that type. This makes impossible to use same BPF program in several struct_ops maps that have different struct_ops type. Check if libbpf rejects such BPF objects files. Signed-off-by:
-
