Check urb->interval on interrupt transfers and allow those with valid
values (6 <= interval <= 16).
Signed-off-by: David Vrabel <david.vrabel@csr.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Support urbs with scatter-gather lists by trying to fit sg list elements
into page lists in one or more qTDs.  qTDs must end on a wMaxPacketSize
boundary so if this isn't possible the urb's sg list must be copied into
bounce buffers.
Signed-off-by: David Vrabel <david.vrabel@csr.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

The WHCI HCD will also support urbs with scatter-gather lists.  Add a
usb_bus field to indicated how many sg list elements are supported by
the HCD.  Use this to decide whether to pass the scatter-list to the HCD
or not.

Make the usb-storage driver use this new field.
Signed-off-by: David Vrabel <david.vrabel@csr.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Cc: Matthew Dharm <mdharm-usb@one-eyed-alien.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

I can't see any reason why these would not be static.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Add bus glue driver for Xilinx USB host controller. The controller can be
configured as HS only or HS/FS hybrid. The driver uses the device tree file
to configure the driver according to the setting in the hardware system.

This driver has been tested with usbtest using the NET2280 PCI card.
Signed-off-by: Julie Zhu <julie.zhu@xilinx.com>
Signed-off-by: John Linn <john.linn@xilinx.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Use dev_dbg() instead of an unconditional printk(KERN_DEBUG).  This has
two benefits; one is that it identifies the USB device which the messages
related to, and the other is that the messages won't be produced unless
debug is turned on.

Enable the debug messages when CONFIG_USB_STORAGE_DEBUG is set.
Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Instead of reporting "SCSI emulation for USB Mass Storage devices",
report "usb-storage 1-4:1.0".
Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Knowing which configuration was chosen is a debugging aid more than it
is informational.
Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

No need to check ehci->debug twice.

Found-by: Sergei Shtylyov sshtylyov@ru.mvista.com
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Add mark and space parity, since the device supports it.
Signed-off-by: Roland Koebler <r.koebler@yahoo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: Add debugobjects support

* 'bugfix' of git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen:
  xen: try harder to balloon up under memory pressure.
  Xen balloon: fix totalram_pages counting.
  xen: explicitly create/destroy stop_machine workqueues outside suspend/resume region.
  xen: improve error handling in do_suspend.
  xen: don't leak IRQs over suspend/resume.
  xen: call clock resume notifier on all CPUs
  xen: use iret for return from 64b kernel to 32b usermode
  xen: don't call dpm_resume_noirq() with interrupts disabled.
  xen: register runstate info for boot CPU early
  xen: register runstate on secondary CPUs
  xen: register timer interrupt with IRQF_TIMER
  xen: correctly restore pfn_to_mfn_list_list after resume
  xen: restore runstate_info even if !have_vcpu_info_placement
  xen: re-register runstate area earlier on resume.
  xen: wait up to 5 minutes for device connetion
  xen: improvement to wait_for_devices()
  xen: fix is_disconnected_device/exists_disconnected_device
  xen/xenbus: make DEVICE_ATTR()s static

* 'xen/fbdev' of git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen:
  xen pvfb: Inhibit VM_IO flag to be set on vmalloc-ed framebuffers.
  fb-defio: Inhibit VM_IO flag to be set on vmalloc-ed framebuffers.
  fb-defio: If FBINFO_VIRTFB is defined, do not set VM_IO flag.
  Fix toogle whether xenbus driver should be built as module or part of kernel.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm:
  dlm: always use GFP_NOFS

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (47 commits)
  ext4: Fix potential fiemap deadlock (mmap_sem vs. i_data_sem)
  ext4: Do not override ext2 or ext3 if built they are built as modules
  jbd2: Export jbd2_log_start_commit to fix ext4 build
  ext4: Fix insufficient checks in EXT4_IOC_MOVE_EXT
  ext4: Wait for proper transaction commit on fsync
  ext4: fix incorrect block reservation on quota transfer.
  ext4: quota macros cleanup
  ext4: ext4_get_reserved_space() must return bytes instead of blocks
  ext4: remove blocks from inode prealloc list on failure
  ext4: wait for log to commit when umounting
  ext4: Avoid data / filesystem corruption when write fails to copy data
  ext4: Use ext4 file system driver for ext2/ext3 file system mounts
  ext4: Return the PTR_ERR of the correct pointer in setup_new_group_blocks()
  jbd2: Add ENOMEM checking in and for jbd2_journal_write_metadata_buffer()
  ext4: remove unused parameter wbc from __ext4_journalled_writepage()
  ext4: remove encountered_congestion trace
  ext4: move_extent_per_page() cleanup
  ext4: initialize moved_len before calling ext4_move_extents()
  ext4: Fix double-free of blocks with EXT4_IOC_MOVE_EXT
  ext4: use ext4_data_block_valid() in ext4_free_blocks()
  ...

* 'for-linus' of git://git.open-osd.org/linux-open-osd:
  exofs: Multi-device mirror support
  exofs: Move all operations to an io_engine
  exofs: move osd.c to ios.c
  exofs: statfs blocks is sectors not FS blocks
  exofs: Prints on mount and unmout
  exofs: refactor exofs_i_info initialization into common helper
  exofs: dbg-print less
  exofs: More sane debug print
  trivial: some small fixes in exofs documentation

* git://git.infradead.org/ubifs-2.6:
  UBIFS: fix return code in check_leaf
  UBI: flush wl before clearing update marker
  MAINTAINERS: change e-mail of Artem Bityutskiy
  UBIFS: remove manual O_SYNC handling
  UBIFS: support mounting of UBI volume character devices
  UBI: Add ubi_open_volume_path

This patch drops usage of floating point variable for 32bit build
Signed-off-by: David T. L. Wong <davidtlwong@gmail.com>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

This patch changes on-disk format, it is accompanied with a parallel
patch to mkfs.exofs that enables multi-device capabilities.

After this patch, old exofs will refuse to mount a new formatted FS and
new exofs will refuse an old format. This is done by moving the magic
field offset inside the FSCB. A new FSCB *version* field was added. In
the future, exofs will refuse to mount unmatched FSCB version. To
up-grade or down-grade an exofs one must use mkfs.exofs --upgrade option
before mounting.

Introduced, a new object that contains a *device-table*. This object
contains the default *data-map* and a linear array of devices
information, which identifies the devices used in the filesystem. This
object is only written to offline by mkfs.exofs. This is why it is kept
separate from the FSCB, since the later is written to while mounted.

Same partition number, same object number is used on all devices only
the device varies.

* define the new format, then load the device table on mount time make
  sure every thing is supported.

* Change I/O engine to now support Mirror IO, .i.e write same data
  to multiple devices, read from a random device to spread the
  read-load from multiple clients (TODO: stripe read)

Implementation notes:
 A few points introduced in previous patch should be mentioned here:

* Special care was made so absolutlly all operation that have any chance
  of failing are done before any osd-request is executed. This is to
  minimize the need for a data consistency recovery, to only real IO
  errors.

* Each IO state has a kref. It starts at 1, any osd-request executed
  will increment the kref, finally when all are executed the first ref
  is dropped. At IO-done, each request completion decrements the kref,
  the last one to return executes the internal _last_io() routine.
  _last_io() will call the registered io_state_done. On sync mode a
  caller does not supply a done method, indicating a synchronous
  request, the caller is put to sleep and a special io_state_done is
  registered that will awaken the caller. Though also in sync mode all
  operations are executed in parallel.
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>

In anticipation for multi-device operations, we separate osd operations
into an abstract I/O API. Currently only one device is used but later
when adding more devices, we will drive all devices in parallel according
to a "data_map" that describes how data is arranged on multiple devices.
The file system level operates, like before, as if there is one object
(inode-number) and an i_size. The io engine will split this to the same
object-number but on multiple device.

At first we introduce Mirror (raid 1) layout. But at the final outcome
we intend to fully implement the pNFS-Objects data-map, including
raid 0,4,5,6 over mirrored devices, over multiple device-groups. And
more. See: http://tools.ietf.org/html/draft-ietf-nfsv4-pnfs-obj-12

* Define an io_state based API for accessing osd storage devices
  in an abstract way.
  Usage:
	First a caller allocates an io state with:
		exofs_get_io_state(struct exofs_sb_info *sbi,
				   struct exofs_io_state** ios);

	Then calles one of:
		exofs_sbi_create(struct exofs_io_state *ios);
		exofs_sbi_remove(struct exofs_io_state *ios);
		exofs_sbi_write(struct exofs_io_state *ios);
		exofs_sbi_read(struct exofs_io_state *ios);
		exofs_oi_truncate(struct exofs_i_info *oi, u64 new_len);

	And when done
		exofs_put_io_state(struct exofs_io_state *ios);

* Convert all source files to use this new API
* Convert from bio_alloc to bio_kmalloc
* In io engine we make use of the now fixed osd_req_decode_sense

There are no functional changes or on disk additions after this patch.
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>

If I do a "git mv" together with a massive code change
and commit in one patch, git looses the rename and
records a delete/new instead. This is bad because I want
a rename recorded so later rebased/cherry-picked patches
to the old name will work. Also the --follow is lost.
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>

Even though exofs has a 4k block size, statfs blocks
is in sectors (512 bytes).

Also if target returns 0 for capacity then make it
ULLONG_MAX. df does not like zero-size filesystems
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>

It is important to print in the logs when a filesystem was
mounted and eventually unmounted.

Print the osd-device's osd_name and pid the FS was
mounted/unmounted on.

TODO: How to also print the namespace path the filesystem was
      mounted on?
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>

There are two places that initialize inodes: exofs_iget() and
exofs_new_inode()

As more members of exofs_i_info that need initialization are
added this code will grow. (soon)
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>

Iner-loops printing is converted to EXOFS_DBG2 which is #defined
to nothing.

It is now almost bareable to just leave debug-on. Every operation
is printed once, with most relevant info (I hope).
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>

debug prints should be somewhat useful without actually
reading the source code
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>

Add exofs.txt to filesystems Documentation index and fix some typos,
identation and grammar.
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>

* 'acpica' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6:
  ACPICA: Update version to 20091112.
  ACPICA: Add additional module-level code support
  ACPICA: Deploy new create integer interface where appropriate
  ACPICA: New internal utility function to create Integer objects
  ACPICA: Add repair for predefined methods that must return sorted lists
  ACPICA: Fix possible fault if return Package objects contain NULL elements
  ACPICA: Add post-order callback to acpi_walk_namespace
  ACPICA: Change package length error message to an info message
  ACPICA: Reduce severity of predefined repair messages, Warning to Info
  ACPICA: Update version to 20091013
  ACPICA: Fix possible memory leak for Scope ASL operator
  ACPICA: Remove possibility of executing _REG methods twice
  ACPICA: Add repair for bad _MAT buffers
  ACPICA: Add repair for bad _BIF/_BIX packages

* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: (41 commits)
  hwmon: (adt7475) Add VID support for the ADT7476
  hwmon: (adt7475) Add an entry in MAINTAINERS
  hwmon: (adt7475) Add support for the ADT7476
  hwmon: (adt7475) Voltage attenuators can be bypassed
  hwmon: (adt7475) Print device information on probe
  hwmon: (adt7475) Handle alternative pin functions
  hwmon: (adt7475) Move sysfs files removal to a separate function
  hwmon: (adt7475) Add support for the ADT7490
  hwmon: (adt7475) Improve device detection
  hwmon: (adt7475) Add missing static marker
  hwmon: (adt7475) Rework voltage inputs handling
  hwmon: (adt7475) Implement pwm_use_point2_pwm_at_crit
  hwmon: (adt7475) New documentation
  hwmon: (adt7475) Add support for the ADT7473
  hwmon: (f71882fg) Add support for the f71889fg (version 2)
  hwmon: (f71882fg) Fix sysfs file removal
  hwmon: (f71882fg) Cleanup sysfs attr creation 2/2
  hwmon: (f71882fg) Cleanup sysfs attr creation 1/2
  hwmon: (thmc50) Stop using I2C_CLIENT_MODULE_PARM
  hwmon: Add Freescale MC13783 ADC driver
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: ice1724 - aureon - modify WM8770 Master & DAC volume
  ALSA: hda/realtek: quirk for D945GCLF2 mainboard
  ALSA: hda - Terradici HDA controllers does not support 64-bit mode
  ALSA: document: Add direct git link to grub hda-analyzer
  ALSA: radio/sound/miro: fix build, cleanup depends/selects
  ALSA: hda - Generalize EAPD inversion check in patch_analog.c
  ASoC: Wrong variable returned on error
  ALSA: snd-usb-us122l: add product IDs of US-122MKII and US-144MKII
  ALSA: hda - Exclude unusable ADCs for ALC88x
  ALSA: hda - Add missing Line-Out and PCM switches as slave
  ALSA: hda - iMac 9,1 sound patch.
  ALSA: opti93x: set MC indirect registers base from PnP data

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (51 commits)
  Input: appletouch - give up maintainership
  Input: dm355evm_kbd - switch to using sparse keymap library
  Input: wistron_btns - switch to using sparse keymap library
  Input: add generic support for sparse keymaps
  Input: fix memory leak in force feedback core
  Input: wistron - remove identification strings from DMI table
  Input: psmouse - remove identification strings from DMI tables
  Input: atkbd - remove identification strings from DMI table
  Input: i8042 - remove identification strings from DMI tables
  DMI: allow omitting ident strings in DMI tables
  Input: psmouse - do not carry DMI data around
  Input: matrix-keypad - switch to using dev_pm_ops
  Input: keyboard - fix lack of locking when traversing handler->h_list
  Input: gpio_keys - scan gpio state at probe and resume time
  Input: keyboard - add locking around event handling
  Input: usbtouchscreen - add support for ET&T TC5UH touchscreen controller
  Input: xpad - add two new Xbox 360 devices
  Input: polled device - do not start polling if interval is zero
  Input: polled device - schedule first poll immediately
  Input: add S3C24XX touchscreen driver
  ...

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (345 commits)
  V4L/DVB (13542): ir-keytable: Allow dynamic table change
  V4L/DVB (13541): atbm8830: replace 64-bit division and floating point usage
  V4L/DVB (13540): ir-common: Cleanup get key evdev code
  V4L/DVB (13539): ir-common: add __func__ for debug messages
  V4L/DVB (13538): ir-common: Use a dynamic keycode table
  V4L/DVB (13537): ir: Prepare the code for dynamic keycode table allocation
  V4L/DVB (13536): em28xx: Use the full RC5 code on HVR-950 Remote Controller
  V4L/DVB (13535): ir-common: Add a hauppauge new table with the complete RC5 code
  V4L/DVB (13534): ir-common: Remove some unused fields/structs
  V4L/DVB (13533): ir: use dynamic tables, instead of static ones
  V4L/DVB (13532): ir-common: Add infrastructure to use a dynamic keycode table
  V4L/DVB (13531): ir-common: rename the debug routine to allow exporting it
  V4L/DVB (13458): go7007: subdev conversion
  V4L/DVB (13457): s2250: subdev conversion
  V4L/DVB (13456): s2250: Change module structure
  V4L/DVB (13528): em28xx: add support for em2800 VC211A card
  em28xx: don't reduce scale to half size for em2800
  em28xx: don't load audio modules when AC97 is mis-detected
  em28xx: em2800 chips support max width of 640
  V4L/DVB (13523): dvb-bt8xx: fix compile warning
  ...

Fix up trivial conflicts due to spelling fixes from the trivial tree in
	Documentation/video4linux/gspca.txt
	drivers/media/video/cx18/cx18-mailbox.h

* 'next-i2c' of git://git.fluff.org/bjdooks/linux: (25 commits)
  i2c-pnx: Map I2C adapter number to platform ID number
  i2c-omap: OMAP3: PM: (re)init for every transfer to support off-mode
  i2c-designware: i2c_dw_handle_tx_abort: Use dev_dbg() for NOACK cases
  i2c-designware: Cosmetic cleanups
  i2c-designware: Tx abort cleanups
  i2c-designware: Skip RX_FULL and TX_EMPTY bits on tx abort errors
  i2c-designware: i2c_dw_xfer_msg: Fix error handling procedures
  i2c-designware: Disable TX_EMPTY when all i2c_msg msgs has been processed
  i2c-designware: Process all i2c_msg messages in the interrupt handler
  i2c-designware: i2c_dw_read: Remove redundant target address checker
  i2c-designware: i2c_dw_func: Set I2C_FUNC_SMBUS_foo bits
  i2c-designware: Initialize byte count variables just prior to being used
  i2c-designware: i2c_dw_xfer_msg: Introduce a local "buf" pointer
  i2c-designware: Divide i2c_dw_xfer_msg into two functions
  i2c-designware: Enable RX_FULL interrupt
  i2c-designware: Set Tx/Rx FIFO threshold levels
  i2c-designware: Process i2c_msg messages in the interrupt handler
  i2c-designware: i2c_dw_xfer_msg: Fix i2c_msg search bug
  i2c-designware: Improved _HCNT/_LCNT calculation
  i2c-designware: Remove an useless local variable "num"
  ...

* 's3c24xx-updates' of git://git.fluff.org/bjdooks/linux:
  ARM: S3C24XX: DMA: Use valid index when accessing array
  ARM: S3C: move s3c_pwm_remove to .devexit.text
  ARM: S3C24XX: Export s3c24xx_set_fiq for modules.
  ARM: S3C: move s3c_adc_remove to .devexit.text

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-next-2.6:
  sl82c105: remove no longer needed debugging code
  sis5513: remove stale TODO
  pdc202xx_old: remove no longer needed debugging code
  cy82c693: remove no longer needed debugging code
  cmd64x: remove no longer needed debugging code
  alim15x3: remove obsolete and dangerous wdc_udma parameter
  ide: Increase WAIT_DRQ to accomodate some CF cards and SSD drives.
  cs5535: add pci id for AMD based CS5535 controllers
  slc90e66: fix UDMA handling
  drivers/ide/tx4938ide.c: use resource_size()
  drivers/ide/ide_platform.c: use resource_size()
  drivers/ide/au1xxx-ide.c: use resource_size()
  hpt366: remove dead old timing tables
  ide: update Kconfig text to mark as deprecated
  ide-tape: remove the BKL
  hpt366: kill unused #define's

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (42 commits)
  tree-wide: fix misspelling of "definition" in comments
  reiserfs: fix misspelling of "journaled"
  doc: Fix a typo in slub.txt.
  inotify: remove superfluous return code check
  hdlc: spelling fix in find_pvc() comment
  doc: fix regulator docs cut-and-pasteism
  mtd: Fix comment in Kconfig
  doc: Fix IRQ chip docs
  tree-wide: fix assorted typos all over the place
  drivers/ata/libata-sff.c: comment spelling fixes
  fix typos/grammos in Documentation/edac.txt
  sysctl: add missing comments
  fs/debugfs/inode.c: fix comment typos
  sgivwfb: Make use of ARRAY_SIZE.
  sky2: fix sky2_link_down copy/paste comment error
  tree-wide: fix typos "couter" -> "counter"
  tree-wide: fix typos "offest" -> "offset"
  fix kerneldoc for set_irq_msi()
  spidev: fix double "of of" in comment
  comment typo fix: sybsystem -> subsystem
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: add multi-input quirk for NextWindow Touchscreen.
  HID: add support for Acan FG-8100 barcode reader
  HID: make Media key on Logitech DiNovo Mini work
  HID: support Logitech/3DConnexion SpaceTraveler and SpaceNavigator
  HID: remove BKL from hiddev_ioctl_usage()
  HID: fixup quirk for NCR devices
  HID: pidff - fix unnecessary loop iterations on reset
  HID: add NOGET quirk for another device from CH Products
  HID: remove useless DRIVER_VERSION macro
  HID: fix MODULE_AUTHOR usage in HID modules
  HID: blacklist Acer Ferrari 4005 optical mouse

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (222 commits)
  [SCSI] zfcp: Remove flag ZFCP_STATUS_FSFREQ_TMFUNCNOTSUPP
  [SCSI] zfcp: Activate fc4s attributes for zfcp in FC transport class
  [SCSI] zfcp: Block scsi_eh thread for rport state BLOCKED
  [SCSI] zfcp: Update FSF error reporting
  [SCSI] zfcp: Improve ELS ADISC handling
  [SCSI] zfcp: Simplify handling of ct and els requests
  [SCSI] zfcp: Remove ZFCP_DID_MASK
  [SCSI] zfcp: Move WKA port to zfcp FC code
  [SCSI] zfcp: Use common code definitions for FC CT structs
  [SCSI] zfcp: Use common code definitions for FC ELS structs
  [SCSI] zfcp: Update FCP protocol related code
  [SCSI] zfcp: Dont fail SCSI commands when transitioning to blocked fc_rport
  [SCSI] zfcp: Assign scheduled work to driver queue
  [SCSI] zfcp: Remove STATUS_COMMON_REMOVE flag as it is not required anymore
  [SCSI] zfcp: Implement module unloading
  [SCSI] zfcp: Merge trace code for fsf requests in one function
  [SCSI] zfcp: Access ports and units with container_of in sysfs code
  [SCSI] zfcp: Remove suspend callback
  [SCSI] zfcp: Remove global config_mutex
  [SCSI] zfcp: Replace local reference counting with common kref
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  m68knommu: export clk_* symbols in clk.c
  m68knommu: Split the .init section into INIT_TEXT_SECTION and INIT_DATA_SECTION.
  m68knommu: Move __init_end out of the .init section.
  m68knommu: Move __init_begin out of the .init section.
  m68knommu: Use more macros inside the .init section.
  m68knommu: Use INIT_TASK_DATA and CACHELINE_ALIGNED_DATA.
  m68knommu: Make THREAD_SIZE available to assembly files.
  m68knommu: Don't hardcode the value of PAGE_SIZE in the linker script.
  m68knommu: rename BSS define in linker script
  m68knommu: add a task_pt_regs() macro
  m68knommu: define arch_has_single_step() and friends
  m68knommu: add uboot commandline argument passing support
  m68knommu: Coldfire GPIO corrections
  m68knommu: move mcf_remove to .devexit.text

Fixed up (?) conflict in arch/m68k/include/asm/ptrace.h

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
  [IA64] Fix cut/paste detritus from unistd.h