- 06 Feb, 2014 40 commits
-
-
Thomas Pugliese authored
commit 83e83ecb upstream. There is no need to skip querying the config and string descriptors for unauthorized WUSB devices when usb_new_device is called. It is allowed by WUSB spec. The only action that needs to be delayed until authorization time is the set config. This change allows user mode tools to see the config and string descriptors earlier in enumeration which is needed for some WUSB devices to function properly on Android systems. It also reduces the amount of divergent code paths needed for WUSB devices. Signed-off-by:
Thomas Pugliese <thomas.pugliese@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mikulas Patocka authored
commit 2cbe5c76 upstream. Previously, hpfs scanned all bitmaps each time the user asked for free space using statfs. This patch changes it so that hpfs scans the bitmaps only once, remembes the free space and on next invocation of statfs it returns the value instantly. New versions of wine are hammering on the statfs syscall very heavily, making some games unplayable when they're stored on hpfs, with load times in minutes. This should be backported to the stable kernels because it fixes user-visible problem (excessive level load times in wine). Signed-off-by:
Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Stephen Warren authored
(This is upstream 75fae117 "ALSA: hda/hdmi - allow PIN_OUT to be dynamically enabled", backported to stable 3.10 through 3.12. 3.13 and later can take the original patch.) Commit 384a48d7 "ALSA: hda: HDMI: Support codecs with fewer cvts than pins" dynamically enabled each pin widget's PIN_OUT only when the pin was actively in use. This was required on certain NVIDIA CODECs for correct operation. Specifically, if multiple pin widgets each had their mux input select the same audio converter widget and each pin widget had PIN_OUT enabled, then only one of the pin widgets would actually receive the audio, and often not the one the user wanted! However, this apparently broke some Intel systems, and commit 6169b673 "ALSA: hda - Always turn on pins for HDMI/DP" reverted the dynamic setting of PIN_OUT. This in turn broke the afore-mentioned NVIDIA CODECs. This change supports either dynamic or static handling of PIN_OUT, selected by a flag set up during CODEC initialization. This flag is enabled for all recent NVIDIA GPUs. Reported-by:
Uosis <uosisl@gmail.com> Signed-off-by:
Stephen Warren <swarren@nvidia.com> Signed-off-by:
-
Anssi Hannula authored
(This is a backport of *part* of upstream 611885bc "ALSA: hda - hdmi: Disallow unsupported 2ch remapping on NVIDIA codecs" to stable 3.10 through 3.12. Later stable already contain all of the original patch.) Mainline commit 611885bc "ALSA: hda - hdmi: Disallow unsupported 2ch remapping on NVIDIA codecs" introduces function patch_nvhdmi(). That function is edited by 75fae117 "ALSA: hda/hdmi - allow PIN_OUT to be dynamically enabled". In order to backport the PIN_OUT patch, I am first back-porting just the addition of function patch_nvhdmi(), so that the conflicts applying the PIN_OUT patch are simplified. Ideally, one might backport all of 611885bc. However, that commit doesn't apply to stable kernels, since it relies on a chain of other patches which implement new features. Signed-off-by:
Anssi Hannula <anssi.hannula@iki.fi> Signed-off-by:
Takashi Iwai <tiwai@suse.de> [swarren, extracted just a small part of the original patch] Signed-off-by:
-
Takashi Iwai authored
commit cbd209f4 upstream. Some old AD codecs don't like the independent HP handling, either it contains a single DAC (AD1981) or it mandates the mixer routing (AD1986A). This patch removes the indep_hp flag for such codecs. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=68081Signed-off-by:
-
Mihai Caraman authored
commit 70713fe3 upstream. Use gva_t instead of unsigned int for eaddr in deliver_tlb_miss(). Signed-off-by:
Mihai Caraman <mihai.caraman@freescale.com> Signed-off-by:
Alexander Graf <agraf@suse.de> Signed-off-by:
-
Andreas Schwab authored
commit 48eaef05 upstream. Signed-off-by:
Andreas Schwab <schwab@linux-m68k.org> Signed-off-by:
-
Helge Deller authored
commit 57737c49 upstream. This commit: f8dae006: parisc: Ensure full cache coherency for kmap/kunmap caused negative caching side-effects, e.g. hanging processes with expect and too many inequivalent alias messages from flush_dcache_page() on Debian 5 systems. This patch now partly reverts it and has been in production use on our debian buildd makeservers since a week without any major problems. Signed-off-by:
Helge Deller <deller@gmx.de> Signed-off-by:
John David Anglin <dave.anglin@bell.net> Signed-off-by:
-
Mikulas Patocka authored
commit 0ef38d70 upstream. The patch 3ddc5b46 breaks networking on alpha (there is a follow-up fix 5cfe8f1b, but networking is still broken even with the second patch). The patch 3ddc5b46 makes csum_partial_copy_from_user check the pointer with access_ok. However, csum_partial_copy_from_user is called also from csum_partial_copy_nocheck and csum_partial_copy_nocheck is called on kernel pointers and it is supposed not to check pointer validity. This bug results in ssh session hangs if the system is loaded and bulk data are printed to ssh terminal. This patch fixes csum_partial_copy_nocheck to call set_fs(KERNEL_DS), so that access_ok in csum_partial_copy_from_user accepts kernel-space addresses. Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
Matt Turner <mattst88@gmail.com> Signed-off-by:
-
Neal Cardwell authored
[ Based upon upstream commit 70315d22 ] Fix inet_diag_dump_icsk() to reflect the fact that both TIME_WAIT and FIN_WAIT2 connections are represented by inet_timewait_sock (not just TIME_WAIT). Thus: (a) We need to iterate through the time_wait buckets if the user wants either TIME_WAIT or FIN_WAIT2. (Before fixing this, "ss -nemoi state fin-wait-2" would not return any sockets, even if there were some in FIN_WAIT2.) (b) We need to check tw_substate to see if the user wants to dump sockets in the particular substate (TIME_WAIT or FIN_WAIT2) that a given connection is in. (Before fixing this, "ss -nemoi state time-wait" would actually return sockets in state FIN_WAIT2.) An analogous fix is in v3.13: 70315d22 ("inet_diag: fix inet_diag_dump_icsk() to use correct state for timewait sockets") but that patch is quite different because 3.13 code is very different in this area due to the unification of TCP hash tables in 05dbc7b5 ("tcp/dccp: remove twchain") in v3.13-rc1. I tested that this applies cleanly between v3.3 and v3.12, and tested that it works in both 3.3 and 3.12. It does not apply cleanly to 3.2 and earlier (though it makes semantic sense), and semantically is not the right fix for 3.13 and beyond (as mentioned above). Signed-off-by:
Neal Cardwell <ncardwell@google.com> Cc: Eric Dumazet <edumazet@google.com> Acked-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Duan Jiong authored
[ Upstream commit c0c0c50f ] When dealing with icmp messages, the skb->data points the ip header that triggered the sending of the icmp message. In gre_cisco_err(), the parse_gre_header() is called, and the iptunnel_pull_header() is called to pull the skb at the end of the parse_gre_header(), so the skb->data doesn't point the inner ip header. Unfortunately, the ipgre_err still needs those ip addresses in inner ip header to look up tunnel by ip_tunnel_lookup(). So just use icmp_hdr() to get inner ip header instead of skb->data. Signed-off-by:
Duan Jiong <duanj.fnst@cn.fujitsu.com> Signed-off-by:
-
Annie Li authored
[ Upstream commit cefe0078 ] This patch removes grant transfer releasing code from netfront, and uses gnttab_end_foreign_access to end grant access since gnttab_end_foreign_access_ref may fail when the grant entry is currently used for reading or writing. * clean up grant transfer code kept from old netfront(2.6.18) which grants pages for access/map and transfer. But grant transfer is deprecated in current netfront, so remove corresponding release code for transfer. * fix resource leak, release grant access (through gnttab_end_foreign_access) and skb for tx/rx path, use get_page to ensure page is released when grant access is completed successfully. Xen-blkfront/xen-tpmfront/xen-pcifront also have similar issue, but patches for them will be created separately. V6: Correct subject line and commit message. V5: Remove unecessary change in xennet_end_access. V4: Revert put_page in gnttab_end_foreign_access, and keep netfront change in single patch. V3: Changes as suggestion from David Vrabel, ensure pages are not freed untill grant acess is ended. V2: Improve patch comments. Signed-off-by:
Annie Li <annie.li@oracle.com> Signed-off-by:
-
Holger Eitzenberger authored
[ Upstream commit a452ce34 ] I see a memory leak when using a transparent HTTP proxy using TPROXY together with TCP early demux and Kernel v3.8.13.15 (Ubuntu stable): unreferenced object 0xffff88008cba4a40 (size 1696): comm "softirq", pid 0, jiffies 4294944115 (age 8907.520s) hex dump (first 32 bytes): 0a e0 20 6a 40 04 1b 37 92 be 32 e2 e8 b4 00 00 .. j@..7..2..... 02 00 07 01 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff810b710a>] kmem_cache_alloc+0xad/0xb9 [<ffffffff81270185>] sk_prot_alloc+0x29/0xc5 [<ffffffff812702cf>] sk_clone_lock+0x14/0x283 [<ffffffff812aaf3a>] inet_csk_clone_lock+0xf/0x7b [<ffffffff8129a893>] netlink_broadcast+0x14/0x16 [<ffffffff812c1573>] tcp_create_openreq_child+0x1b/0x4c3 [<ffffffff812c033e>] tcp_v4_syn_recv_sock+0x38/0x25d [<ffffffff812c13e4>] tcp_check_req+0x25c/0x3d0 [<ffffffff812bf87a>] tcp_v4_do_rcv+0x287/0x40e [<ffffffff812a08a7>] ip_route_input_noref+0x843/0xa55 [<ffffffff812bfeca>] tcp_v4_rcv+0x4c9/0x725 [<ffffffff812a26f4>] ip_local_deliver_finish+0xe9/0x154 [<ffffffff8127a927>] __netif_receive_skb+0x4b2/0x514 [<ffffffff8127aa77>] process_backlog+0xee/0x1c5 [<ffffffff8127c949>] net_rx_action+0xa7/0x200 [<ffffffff81209d86>] add_interrupt_randomness+0x39/0x157 But there are many more, resulting in the machine going OOM after some days. From looking at the TPROXY code, and with help from Florian, I see that the memory leak is introduced in tcp_v4_early_demux(): void tcp_v4_early_demux(struct sk_buff *skb) { /* ... */ iph = ip_hdr(skb); th = tcp_hdr(skb); if (th->doff < sizeof(struct tcphdr) / 4) return; sk = __inet_lookup_established(dev_net(skb->dev), &tcp_hashinfo, iph->saddr, th->source, iph->daddr, ntohs(th->dest), skb->skb_iif); if (sk) { skb->sk = sk; where the socket is assigned unconditionally to skb->sk, also bumping the refcnt on it. This is problematic, because in our case the skb has already a socket assigned in the TPROXY target. This then results in the leak I see. The very same issue seems to be with IPv6, but haven't tested. Reviewed-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Holger Eitzenberger <holger@eitzenberger.org> Signed-off-by:
-
Oliver Hartkopp authored
[ Upstream commit a0065f26 ] The two commits 0115e8e3 (net: remove delay at device dismantle) and 748e2d93 (net: reinstate rtnl in call_netdevice_notifiers()) silently removed a NULL pointer check for in_dev since Linux 3.7. This patch re-introduces this check as it causes crashing the kernel when setting small mtu values on non-ip capable netdevices. Signed-off-by:
Oliver Hartkopp <socketcan@hartkopp.net> Acked-by:
-
Or Gerlitz authored
[ Upstream commit d0bc6555 ] Make sure the practice set by commit 0afb1666 "vxlan: Add capability of Rx checksum offload for inner packet" is applied when the skb goes through the portion of the RX code which is shared between vxlan netdevices and ovs vxlan port instances. Cc: Joseph Gasparakis <joseph.gasparakis@intel.com> Cc: Pravin B Shelar <pshelar@nicira.com> Signed-off-by:
Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by:
-
Duan Jiong authored
[ Upstream commit 11c21a30 ] commit a6222602("ip_tunnel: fix kernel panic with icmp_dest_unreach") clear IPCB in ip_tunnel_xmit() , or else skb->cb[] may contain garbage from GSO segmentation layer. But commit 0e6fbc5b("ip_tunnels: extend iptunnel_xmit()") refactor codes, and it clear IPCB behind the dst_link_failure(). So clear IPCB in ip_tunnel_xmit() just like commti a6222602("ip_tunnel: fix kernel panic with icmp_dest_unreach"). Signed-off-by:
-
Heiko Carstens authored
[ Upstream commit 3af57f78 ] The s390 bpf jit compiler emits the signed divide instructions "dr" and "d" for unsigned divisions. This can cause problems: the dividend will be zero extended to a 64 bit value and the divisor is the 32 bit signed value as specified A or X accumulator, even though A and X are supposed to be treated as unsigned values. The divide instrunctions will generate an exception if the result cannot be expressed with a 32 bit signed value. This is the case if e.g. the dividend is 0xffffffff and the divisor either 1 or also 0xffffffff (signed: -1). To avoid all these issues simply use unsigned divide instructions. Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit aee636c4 ] At first Jakub Zawadzki noticed that some divisions by reciprocal_divide were not correct. (off by one in some cases) http://www.wireshark.org/~darkjames/reciprocal-buggy.c He could also show this with BPF: http://www.wireshark.org/~darkjames/set-and-dump-filter-k-bug.c The reciprocal divide in linux kernel is not generic enough, lets remove its use in BPF, as it is not worth the pain with current cpus. Signed-off-by:
Jakub Zawadzki <darkjames-ws@darkjames.pl> Cc: Mircea Gherzan <mgherzan@gmail.com> Cc: Daniel Borkmann <dxchgb@gmail.com> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: Matt Evans <matt@ozlabs.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by:
-
Christoph Paasch authored
[ Upstream commit 77f99ad1 ] Because the tcp-metrics is an RCU-list, it may be that two soft-interrupts are inside __tcp_get_metrics() for the same destination-IP at the same time. If this destination-IP is not yet part of the tcp-metrics, both soft-interrupts will end up in tcpm_new and create a new entry for this IP. So, we will have two tcp-metrics with the same destination-IP in the list. This patch checks twice __tcp_get_metrics(). First without holding the lock, then while holding the lock. The second one is there to confirm that the entry has not been added by another soft-irq while waiting for the spin-lock. Fixes: 51c5d0c4 (tcp: Maintain dynamic metrics in local cache.) Signed-off-by:
Christoph Paasch <christoph.paasch@uclouvain.be> Reviewed-by:
-
Gerald Schaefer authored
[ Upstream commit c196403b ] commit ae4b46e9 "net: rds: use this_cpu_* per-cpu helper" broke per-cpu handling for rds. chpfirst is the result of __this_cpu_read(), so it is an absolute pointer and not __percpu. Therefore, __this_cpu_write() should not operate on chpfirst, but rather on cache->percpu->first, just like __this_cpu_read() did before. Signed-off-byd Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by:
-
Richard Weinberger authored
[ Upstream commit a926592f ] rhine_reset_task() misses to disable the tx scheduler upon reset, this can lead to a crash if work is still scheduled while we're resetting the tx queue. Fixes: [ 93.591707] BUG: unable to handle kernel NULL pointer dereference at 0000004c [ 93.595514] IP: [<c119d10d>] rhine_napipoll+0x491/0x6 Signed-off-by:
Richard Weinberger <richard@nod.at> Signed-off-by:
-
Hannes Frederic Sowa authored
[ Upstream commit 95f4a45d ] Bob Falken reported that after 4G packets, multicast forwarding stopped working. This was because of a rule reference counter overflow which freed the rule as soon as the overflow happend. This patch solves this by adding the FIB_LOOKUP_NOREF flag to fib_rules_lookup calls. This is safe even from non-rcu locked sections as in this case the flag only implies not taking a reference to the rule, which we don't need at all. Rules only hold references to the namespace, which are guaranteed to be available during the call of the non-rcu protected function reg_vif_xmit because of the interface reference which itself holds a reference to the net namespace. Fixes: f0ad0860 ("ipv4: ipmr: support multiple tables") Fixes: d1db275d ("ipv6: ip6mr: support multiple tables") Reported-by:
Bob Falken <NetFestivalHaveFun@gmx.com> Cc: Patrick McHardy <kaber@trash.net> Cc: Thomas Graf <tgraf@suug.ch> Cc: Julian Anastasov <ja@ssi.bg> Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by:
-
Christian Engelmayer authored
[ Upstream commit 267d29a6 ] Fix a memory leak in the ieee802154_add_iface() error handling path. Detected by Coverity: CID 710490. Signed-off-by:
Christian Engelmayer <cengelma@gmx.at> Signed-off-by:
-
Bjørn Mork authored
[ Upstream commit fdc3452c ] Commit 60e453a9 ("USBNET: fix handling padding packet") added an extra SG entry in case padding is necessary, but failed to update the initialisation of the list. This can cause list traversal to fall off the end of the list, resulting in an oops. Fixes: 60e453a9 ("USBNET: fix handling padding packet") Reported-by:
Thomas Kear <thomas@kear.co.nz> Cc: Ming Lei <ming.lei@canonical.com> Signed-off-by:
Bjørn Mork <bjorn@mork.no> Tested-by:
Ming Lei <ming.lei@canonical.com> Signed-off-by:
-
Michal Schmidt authored
[ Upstream commit 95e92fd4 ] bnx2x triggers warnings with CONFIG_DMA_API_DEBUG=y: WARNING: CPU: 0 PID: 2253 at lib/dma-debug.c:887 check_unmap+0xf8/0x920() bnx2x 0000:28:00.0: DMA-API: device driver frees DMA memory with different size [device address=0x00000000da2b389e] [map size=1490 bytes] [unmap size=66 bytes] The reason is that bnx2x splits a TSO BD into two BDs (headers + data) using one DMA mapping for both, but it uses only the length of the first BD when unmapping. This patch fixes the bug by unmapping the whole length of the two BDs. Signed-off-by:
Michal Schmidt <mschmidt@redhat.com> Reviewed-by:
Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by:
-
Shane Huang authored
commit 032f708b upstream. The locations of SMBus register base address and enablement bit are changed from AMD ML, which need this patch to be supported. Signed-off-by:
Shane Huang <shane.huang@amd.com> Reviewed-by:
Jean Delvare <khali@linux-fr.org> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
Gregory CLEMENT authored
commit f8b94beb upstream. The first variants of Armada XP SoCs (A0 stepping) have issues related to the i2c controller which prevent to use the offload mechanism and lead to a kernel hang during boot. The commit introduces a new the compatible string marvell,mv78230-a0-i2c for the i2c controller. Signed-off-by:
Gregory CLEMENT <gregory.clement@free-electrons.com> Acked-by:
Arnd Bergmann <arnd@arndb.de> cc: devicetree@vger.kernel.org Fixes: 930ab3d4 (i2c: mv64xxx: Add I2C Transaction Generator support) Signed-off-by:
Jason Cooper <jason@lakedaemon.net> Signed-off-by:
-
Gregory CLEMENT authored
commit 6cf70ae9 upstream. The first variants of Armada XP SoCs (A0 stepping) have issues related to the i2c controller which prevent to use the offload mechanism and lead to a kernel hang during boot. The commit introduces a new the compatible string marvell,mv78230-a0-i2c for the i2c controller. When this compatible string is used the driver disables the offload mechanism and the kernel no more hangs on these SoCs. Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Acked-by:
-
Gregory CLEMENT authored
commit 85e618a1 upstream. The first variants of Armada XP SoCs (A0 stepping) have issues related to the i2c controller which prevent to use the offload mechanism and lead to a kernel hang during boot. This commit add quirk in the mvebu platform code to check the SoC version and then update the compatible string for the i2c controller according to the revision of the SoC. Currently only some OpenBlocks AX3-4 boards are known to use an A0 revision so the check is done only for these boards. Signed-off-by:
-
Gregory CLEMENT authored
commit af8d1c63 upstream. All the mvebu SoCs have information related to their variant and revision that can be read from the PCI control register. This patch adds support for Armada XP and Armada 370. This reading of the revision and the ID are done before the PCI initialization to avoid any conflicts. Once these data are retrieved, the resources are freed to let the PCI subsystem use it. Fixes: 930ab3d4 (i2c: mv64xxx: Add I2C Transaction Generator support) Signed-off-by:
-
Takashi Iwai authored
commit b0ad4ff3 upstream. The DriveGuard chips on the new HP laptops are with a new PnP ID "HPQ6007". It should be compatible with older chips. Acked-by:
Éric Piel <eric.piel@tremplin-utc.net> Signed-off-by:
Matthew Garrett <matthew.garrett@nebula.com> Signed-off-by:
-
Minchan Kim authored
commit da4a0412 upstream. Dan and Sergey reported that there is a racy between reset and flushing of pending work so that it could make oops by freeing zram->meta in reset while zram_slot_free can access zram->meta if new request is adding during the race window. This patch moves flush after taking init_lock so it prevents new request so that it closes the race. Signed-off-by:
Minchan Kim <minchan@kernel.org> Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchan@redhat.com> Tested-by:
Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Kent Overstreet authored
commit ef71ec00 upstream. The code that handles overlapping extents that we've just read back in from disk was depending on the behaviour of the code that handles overlapping extents as we're inserting into a btree node in the case of an insert that forced an existing extent to be split: on insert, if we had to split we'd also insert a new extent to represent the top part of the old extent - and then that new extent would get written out. The code that read the extents back in thus not bother with splitting extents - if it saw an extent that ovelapped in the middle of an older extent, it would trim the old extent to only represent the bottom part, assuming that the original insert would've inserted a new extent to represent the top part. I still haven't figured out _how_ it can happen, but I'm now pretty convinced (and testing has confirmed) that there's some kind of an obscure corner case (probably involving extent merging, and multiple overwrites in different sets) that breaks this. The fix is to change the mergesort fixup code to split extents itself when required. Signed-off-by:
Kent Overstreet <kmo@daterainc.com> Signed-off-by:
-
Eric W. Biederman authored
commit 260a459d upstream. A bug was introduced with the is_mounted helper function in commit f7a99c5b Author: Al Viro <viro@zeniv.linux.org.uk> Date: Sat Jun 9 00:59:08 2012 -0400 get rid of ->mnt_longterm it's enough to set ->mnt_ns of internal vfsmounts to something distinct from all struct mnt_namespace out there; then we can just use the check for ->mnt_ns != NULL in the fast path of mntput_no_expire() Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> The intent was to test if the real_mount(vfsmount)->mnt_ns was NULL_OR_ERR but the code is actually testing real_mount(vfsmount) and always returning true. The result is d_absolute_path returning paths it should be hiding. Signed-off-by:
"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
Eric W. Biederman authored
commit a8323da0 upstream. In commit 232d2d60 Author: Waiman Long <Waiman.Long@hp.com> Date: Mon Sep 9 12:18:13 2013 -0400 dcache: Translating dentry into pathname without taking rename_lock The __dentry_path locking was changed and the variable error was intended to be moved outside of the loop. Unfortunately the inner declaration of error was not removed. Resulting in a version of __dentry_path that will never return an error. Remove the problematic inner declaration of error and allow __dentry_path to return errors once again. Cc: Waiman Long <Waiman.Long@hp.com> Signed-off-by:
-
Theodore Ts'o authored
commit 09c455aa upstream. A missing cast means that when we are truncating a file which is less than 60 bytes, we don't clear the correct area of memory, and in fact we can end up truncating the next inode in the inode table, or worse yet, some other kernel data structure. Addresses-Coverity-Id: #751987 Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu> Signed-off-by:
-
Tejun Heo authored
commit ecd75ad5 upstream. For some reason, some early WD drives spin up and down drives erratically when the link is put into slumber mode which can reduce the life expectancy of the device significantly. Unfortunately, we don't have full list of devices and given the nature of the issue it'd be better to err on the side of false positives than the other way around. Let's disable LPM on all WD devices which match one of the known problematic model prefixes and are SATA-I. As horkage list doesn't support matching SATA capabilities, this is implemented as two horkages - WD_BROKEN_LPM and NOLPM. The former is set for the known prefixes and sets the latter if the matched device is SATA-I. Note that this isn't optimal as this disables all LPM operations and partial link power state reportedly works fine on these; however, the way LPM is implemented in libata makes it difficult to precisely map libata LPM setting to specific link power state. Well, these devices are already fairly outdated. Let's just disable whole LPM for now. Signed-off-by:
Tejun Heo <tj@kernel.org> Reported-and-tested-by:
Nikos Barkas <levelwol@gmail.com> Reported-and-tested-by:
Ioannis Barkas <risc4all@yahoo.com> References: https://bugzilla.kernel.org/show_bug.cgi?id=57211Signed-off-by:
-
Simon Guinot authored
commit a96cc303 upstream. This patch updates the Armada 370/XP SATA node with the new compatible string "marvell,armada-370-sata". Signed-off-by:
Simon Guinot <simon.guinot@sequanux.org> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Cc: Lior Amsalem <alior@marvell.com> Acked-by:
-
Lior Amsalem authored
commit 9013d64e upstream. On Armada 370/XP SoCs, once a disk is removed from a SATA port, then the re-plug events are not detected by the sata_mv driver. This patch fixes the issue by updating the PHY speed in the LP_PHY_CTL register (0x58) according to the SControl speed. Note that this fix is only applied if the compatible string "marvell,armada-370-sata" is found in the SATA DT node. Fixes: 9ae6f740 ("arm: mach-mvebu: add support for Armada 370 and Armada XP with DT") Signed-off-by:
Lior Amsalem <alior@marvell.com> Signed-off-by:
Nadav Haklai <nadavh@marvell.com> Signed-off-by:
-
Simon Guinot authored
commit b1f5c73b upstream. The sata_mv driver supports the SATA IP found in several Marvell SoCs. As some new SATA registers have been introduced with the Armada 370/XP SoCs, a way to identify them is needed. This patch introduces a new compatible string for the SATA IP found in Armada 370/XP SoCs. Signed-off-by:
-
