Pull ata updates from Damien Le Moal:
 "The ususal set of driver fixes and improvements as well as several
  patches improving libata core in preparation of the introduction of
  the support for the command duration limits feature. In more details:

   - Define the missing COMPLETED sense key in scsi header (me)

   - Several patches to improve libata handling of the status of
     completed commands and the retry and sense data reported to the
     scsi layer for failed commands. In particular, this widen the
     support for NCQ autosense to all drives that support this feature
     instead of restricting this feature use to ZAC drives only (Niklas)

   - Cleanup of the pata_mpc52xx and sata_dwc_460ex drivers to remove
     the use of the deprecated NO_IRQ macro (Christophe)

   - Fix build dedependency on OF vs use of the of_match_ptr() macro to
     avoid build errors with the sata_gemini and pata_ftide010 drivers
     (me)

   - Some libata cleanups using the new helper function
     ata_port_is_frozen() (Niklas)

   - Improve internal command handling by not retrying commands that
     failed with a timeout (Niklas)

   - Remove code for several unused libata helper functions (from
     Niklas)

   - Remove the palmchip pata_bk3710 driver. A couple of other driver
     removal should come in through the arm tree pull request (from
     Arnd)

   - Remove unused variable and function in the sata_dwc_460ex driver
     and libata-sff code (Colin and Sergey)

   - Minor cleanup of the pata_ep93xx driver platform code (from
     Minghao)

   - Remove the unnecessary linux/msi.h include from the ahci driver
     (Thomas)

   - Changes to libata enum constants definitions to avoid warnings with
     gcc-13 (Arnd)"

* tag 'ata-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: (24 commits)
  ata: ahci: fix enum constants for gcc-13
  ata: libata: fix commands incorrectly not getting retried during NCQ error
  ata: ahci: Remove linux/msi.h include
  ata: sata_dwc_460ex: Check !irq instead of irq == NO_IRQ
  ata: pata_ep93xx: use devm_platform_get_and_ioremap_resource()
  ata: libata-sff: kill unused ata_sff_busy_sleep()
  ata: sata_dwc_460ex: remove variable num_processed
  ata: remove palmchip pata_bk3710 driver
  ata: remove unused helper ata_id_flush_ext_enabled()
  ata: remove unused helper ata_id_flush_enabled()
  ata: remove unused helper ata_id_lba48_enabled()
  ata: libata-core: do not retry reading the log on timeout
  scsi: libsas: make use of ata_port_is_frozen() helper
  ata: make use of ata_port_is_frozen() helper
  ata: add ata_port_is_frozen() helper
  ata: pata_ftide010: Remove build dependency on OF
  ata: sata_gemini: Remove dependency on OF for compile tests
  ata: pata_mpc52xx: Replace NO_IRQ with 0
  ata: libahci: read correct status and error field for NCQ commands
  ata: libata: fetch sense data for ATA devices supporting sense reporting
  ...

Pull block updates from Jens Axboe:

 - NVMe pull requests via Christoph:
      - Support some passthrough commands without CAP_SYS_ADMIN (Kanchan
        Joshi)
      - Refactor PCIe probing and reset (Christoph Hellwig)
      - Various fabrics authentication fixes and improvements (Sagi
        Grimberg)
      - Avoid fallback to sequential scan due to transient issues (Uday
        Shankar)
      - Implement support for the DEAC bit in Write Zeroes (Christoph
        Hellwig)
      - Allow overriding the IEEE OUI and firmware revision in configfs
        for nvmet (Aleksandr Miloserdov)
      - Force reconnect when number of queue changes in nvmet (Daniel
        Wagner)
      - Minor fixes and improvements (Uros Bizjak, Joel Granados, Sagi
        Grimberg, Christoph Hellwig, Christophe JAILLET)
      - Fix and cleanup nvme-fc req allocation (Chaitanya Kulkarni)
      - Use the common tagset helpers in nvme-pci driver (Christoph
        Hellwig)
      - Cleanup the nvme-pci removal path (Christoph Hellwig)
      - Use kstrtobool() instead of strtobool (Christophe JAILLET)
      - Allow unprivileged passthrough of Identify Controller (Joel
        Granados)
      - Support io stats on the mpath device (Sagi Grimberg)
      - Minor nvmet cleanup (Sagi Grimberg)

 - MD pull requests via Song:
      - Code cleanups (Christoph)
      - Various fixes

 - Floppy pull request from Denis:
      - Fix a memory leak in the init error path (Yuan)

 - Series fixing some batch wakeup issues with sbitmap (Gabriel)

 - Removal of the pktcdvd driver that was deprecated more than 5 years
   ago, and subsequent removal of the devnode callback in struct
   block_device_operations as no users are now left (Greg)

 - Fix for partition read on an exclusively opened bdev (Jan)

 - Series of elevator API cleanups (Jinlong, Christoph)

 - Series of fixes and cleanups for blk-iocost (Kemeng)

 - Series of fixes and cleanups for blk-throttle (Kemeng)

 - Series adding concurrent support for sync queues in BFQ (Yu)

 - Series bringing drbd a bit closer to the out-of-tree maintained
   version (Christian, Joel, Lars, Philipp)

 - Misc drbd fixes (Wang)

 - blk-wbt fixes and tweaks for enable/disable (Yu)

 - Fixes for mq-deadline for zoned devices (Damien)

 - Add support for read-only and offline zones for null_blk
   (Shin'ichiro)

 - Series fixing the delayed holder tracking, as used by DM (Yu,
   Christoph)

 - Series enabling bio alloc caching for IRQ based IO (Pavel)

 - Series enabling userspace peer-to-peer DMA (Logan)

 - BFQ waker fixes (Khazhismel)

 - Series fixing elevator refcount issues (Christoph, Jinlong)

 - Series cleaning up references around queue destruction (Christoph)

 - Series doing quiesce by tagset, enabling cleanups in drivers
   (Christoph, Chao)

 - Series untangling the queue kobject and queue references (Christoph)

 - Misc fixes and cleanups (Bart, David, Dawei, Jinlong, Kemeng, Ye,
   Yang, Waiman, Shin'ichiro, Randy, Pankaj, Christoph)

* tag 'for-6.2/block-2022-12-08' of git://git.kernel.dk/linux: (247 commits)
  blktrace: Fix output non-blktrace event when blk_classic option enabled
  block: sed-opal: Don't include <linux/kernel.h>
  sed-opal: allow using IOC_OPAL_SAVE for locking too
  blk-cgroup: Fix typo in comment
  block: remove bio_set_op_attrs
  nvmet: don't open-code NVME_NS_ATTR_RO enumeration
  nvme-pci: use the tagset alloc/free helpers
  nvme: add the Apple shared tag workaround to nvme_alloc_io_tag_set
  nvme: only set reserved_tags in nvme_alloc_io_tag_set for fabrics controllers
  nvme: consolidate setting the tagset flags
  nvme: pass nr_maps explicitly to nvme_alloc_io_tag_set
  block: bio_copy_data_iter
  nvme-pci: split out a nvme_pci_ctrl_is_dead helper
  nvme-pci: return early on ctrl state mismatch in nvme_reset_work
  nvme-pci: rename nvme_disable_io_queues
  nvme-pci: cleanup nvme_suspend_queue
  nvme-pci: remove nvme_pci_disable
  nvme-pci: remove nvme_disable_admin_queue
  nvme: merge nvme_shutdown_ctrl into nvme_disable_ctrl
  nvme: use nvme_wait_ready in nvme_shutdown_ctrl
  ...

Pull io_uring updates part two from Jens Axboe:

 - Misc fixes (me, Lin)

 - Series from Pavel extending the single task exclusive ring mode,
   yielding nice improvements for the common case of having a single
   ring per thread (Pavel)

 - Cleanup for MSG_RING, removing our IOPOLL hack (Pavel)

 - Further poll cleanups and fixes (Pavel)

 - Misc cleanups and fixes (Pavel)

* tag 'for-6.2/io_uring-next-2022-12-08' of git://git.kernel.dk/linux: (22 commits)
  io_uring/msg_ring: flag target ring as having task_work, if needed
  io_uring: skip spinlocking for ->task_complete
  io_uring: do msg_ring in target task via tw
  io_uring: extract a io_msg_install_complete helper
  io_uring: get rid of double locking
  io_uring: never run tw and fallback in parallel
  io_uring: use tw for putting rsrc
  io_uring: force multishot CQEs into task context
  io_uring: complete all requests in task context
  io_uring: don't check overflow flush failures
  io_uring: skip overflow CQE posting for dying ring
  io_uring: improve io_double_lock_ctx fail handling
  io_uring: dont remove file from msg_ring reqs
  io_uring: reshuffle issue_flags
  io_uring: don't reinstall quiesce node for each tw
  io_uring: improve rsrc quiesce refs checks
  io_uring: don't raw spin unlock to match cq_lock
  io_uring: combine poll tw handlers
  io_uring: improve poll warning handling
  io_uring: remove ctx variable in io_poll_check_events
  ...

Pull io_uring updates from Jens Axboe:

 - Always ensure proper ordering in case of CQ ring overflow, which then
   means we can remove some work-arounds for that (Dylan)

 - Support completion batching for multishot, greatly increasing the
   efficiency for those (Dylan)

 - Flag epoll/eventfd wakeups done from io_uring, so that we can easily
   tell if we're recursing into io_uring again.

   Previously, this would have resulted in repeated multishot
   notifications if we had a dependency there. That could happen if an
   eventfd was registered as the ring eventfd, and we multishot polled
   for events on it. Or if an io_uring fd was added to epoll, and
   io_uring had a multishot request for the epoll fd.

   Test cases here:
	https://git.kernel.dk/cgit/liburing/commit/?id=919755a7d0096fda08fb6d65ac54ad8d0fe027cd

   Previously these got terminated when the CQ ring eventually
   overflowed, now it's handled gracefully (me).

 - Tightening of the IOPOLL based completions (Pavel)

 - Optimizations of the networking zero-copy paths (Pavel)

 - Various tweaks and fixes (Dylan, Pavel)

* tag 'for-6.2/io_uring-2022-12-08' of git://git.kernel.dk/linux: (41 commits)
  io_uring: keep unlock_post inlined in hot path
  io_uring: don't use complete_post in kbuf
  io_uring: spelling fix
  io_uring: remove io_req_complete_post_tw
  io_uring: allow multishot polled reqs to defer completion
  io_uring: remove overflow param from io_post_aux_cqe
  io_uring: add lockdep assertion in io_fill_cqe_aux
  io_uring: make io_fill_cqe_aux static
  io_uring: add io_aux_cqe which allows deferred completion
  io_uring: allow defer completion for aux posted cqes
  io_uring: defer all io_req_complete_failed
  io_uring: always lock in io_apoll_task_func
  io_uring: remove iopoll spinlock
  io_uring: iopoll protect complete_post
  io_uring: inline __io_req_complete_put()
  io_uring: remove io_req_tw_post_queue
  io_uring: use io_req_task_complete() in timeout
  io_uring: hold locks for io_req_complete_failed
  io_uring: add completion locking for iopoll
  io_uring: kill io_cqring_ev_posted() and __io_cq_unlock_post()
  ...

Pull iomap update from Darrick Wong:

 - Minor code cleanup to eliminate unnecessary bit shifting

* tag 'iomap-6.2-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  iomap: directly use logical block size

Pull vfs remap_range update from Darrick Wong:

 - Make some minor adjustments to the remap range preparation function
   to skip file updates when the request length is adjusted downwards to
   zero.

* tag 'vfs-6.2-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  fs/remap_range: avoid spurious writeback on zero length request

Merge tag 'fs.xattr.simple.rework.rbtree.rwlock.v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping

Pull simple-xattr updates from Christian Brauner:
 "This ports the simple xattr infrastucture to rely on a simple rbtree
  protected by a read-write lock instead of a linked list protected by a
  spinlock.

  A while ago we received reports about scaling issues for filesystems
  using the simple xattr infrastructure that also support setting a
  larger number of xattrs. Specifically, cgroups and tmpfs.

  Both cgroupfs and tmpfs can be mounted by unprivileged users in
  unprivileged containers and root in an unprivileged container can set
  an unrestricted number of security.* xattrs and privileged users can
  also set unlimited trusted.* xattrs. A few more words on further that
  below. Other xattrs such as user.* are restricted for kernfs-based
  instances to a fairly limited number.

  As there are apparently users that have a fairly large number of
  xattrs we should scale a bit better. Using a simple linked list
  protected by a spinlock used for set, get, and list operations doesn't
  scale well if users use a lot of xattrs even if it's not a crazy
  number.

  Let's switch to a simple rbtree protected by a rwlock. It scales way
  better and gets rid of the perf issues some people reported. We
  originally had fancier solutions even using an rcu+seqlock protected
  rbtree but we had concerns about being to clever and also that
  deletion from an rbtree with rcu+seqlock isn't entirely safe.

  The rbtree plus rwlock is perfectly fine. By far the most common
  operation is getting an xattr. While setting an xattr is not and
  should be comparatively rare. And listxattr() often only happens when
  copying xattrs between files or together with the contents to a new
  file.

  Holding a lock across listxattr() is unproblematic because it doesn't
  list the values of xattrs. It can only be used to list the names of
  all xattrs set on a file. And the number of xattr names that can be
  listed with listxattr() is limited to XATTR_LIST_MAX aka 65536 bytes.
  If a larger buffer is passed then vfs_listxattr() caps it to
  XATTR_LIST_MAX and if more xattr names are found it will return
  -E2BIG. In short, the maximum amount of memory that can be retrieved
  via listxattr() is limited and thus listxattr() bounded.

  Of course, the API is broken as documented on xattr(7) already. While
  I have no idea how the xattr api ended up in this state we should
  probably try to come up with something here at some point. An iterator
  pattern similar to readdir() as an alternative to listxattr() or
  something else.

  Right now it is extremly strange that users can set millions of xattrs
  but then can't use listxattr() to know which xattrs are actually set.
  And it's really trivial to do:

	for i in {1..1000000}; do setfattr -n security.$i -v $i ./file1; done

  And around 5000 xattrs it's impossible to use listxattr() to figure
  out which xattrs are actually set. So I have suggested that we try to
  limit the number of xattrs for simple xattrs at least. But that's a
  future patch and I don't consider it very urgent.

  A bonus of this port to rbtree+rwlock is that we shrink the memory
  consumption for users of the simple xattr infrastructure.

  This also adds kernel documentation to all the functions"

* tag 'fs.xattr.simple.rework.rbtree.rwlock.v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping:
  xattr: use rbtree for simple_xattrs

Pull lsm updates from Paul Moore:

 - Improve the error handling in the device cgroup such that memory
   allocation failures when updating the access policy do not
   potentially alter the policy.

 - Some minor fixes to reiserfs to ensure that it properly releases
   LSM-related xattr values.

 - Update the security_socket_getpeersec_stream() LSM hook to take
   sockptr_t values.

   Previously the net/BPF folks updated the getsockopt code in the
   network stack to leverage the sockptr_t type to make it easier to
   pass both kernel and __user pointers, but unfortunately when they did
   so they didn't convert the LSM hook.

   While there was/is no immediate risk by not converting the LSM hook,
   it seems like this is a mistake waiting to happen so this patch
   proactively does the LSM hook conversion.

 - Convert vfs_getxattr_alloc() to return an int instead of a ssize_t
   and cleanup the callers. Internally the function was never going to
   return anything larger than an int and the callers were doing some
   very odd things casting the return value; this patch fixes all that
   and helps bring a bit of sanity to vfs_getxattr_alloc() and its
   callers.

 - More verbose, and helpful, LSM debug output when the system is booted
   with "lsm.debug" on the command line. There are examples in the
   commit description, but the quick summary is that this patch provides
   better information about which LSMs are enabled and the ordering in
   which they are processed.

 - General comment and kernel-doc fixes and cleanups.

* tag 'lsm-pr-20221212' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
  lsm: Fix description of fs_context_parse_param
  lsm: Add/fix return values in lsm_hooks.h and fix formatting
  lsm: Clarify documentation of vm_enough_memory hook
  reiserfs: Add missing calls to reiserfs_security_free()
  lsm,fs: fix vfs_getxattr_alloc() return type and caller error paths
  device_cgroup: Roll back to original exceptions after copy failure
  LSM: Better reporting of actual LSMs at boot
  lsm: make security_socket_getpeersec_stream() sockptr_t safe
  audit: Fix some kernel-doc warnings
  lsm: remove obsoleted comments for security hooks
  fs: edit a comment made in bad taste

Pull selinux updates from Paul Moore:
 "Two SELinux patches: one increases the sleep time on deprecated
  functionality, and one removes the indirect calls in the sidtab
  context conversion code"

* tag 'selinux-pr-20221212' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
  selinux: remove the sidtab context conversion indirect calls
  selinux: increase the deprecation sleep for checkreqprot and runtime disable

Pull audit updates from Paul Moore:
 "Two performance oriented patches for the audit subsystem: one
  consolidates similar code to gain some caching advantages, while the
  other stores a value in a stack variable to avoid repeated lookups in
  a loop.

  The commit descriptions have more information, including some
  before/after performance measurements"

* tag 'audit-pr-20221212' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
  audit: unify audit_filter_{uring(), inode_name(), syscall()}
  audit: cache ctx->major in audit_filter_syscall()

Pull landlock updates from Mickaël Salaün:
 "This adds file truncation support to Landlock, contributed by Günther
  Noack. As described by Günther [1], the goal of these patches is to
  work towards a more complete coverage of file system operations that
  are restrictable with Landlock.

  The known set of currently unsupported file system operations in
  Landlock is described at [2]. Out of the operations listed there,
  truncate is the only one that modifies file contents, so these patches
  should make it possible to prevent the direct modification of file
  contents with Landlock.

  The new LANDLOCK_ACCESS_FS_TRUNCATE access right covers both the
  truncate(2) and ftruncate(2) families of syscalls, as well as open(2)
  with the O_TRUNC flag. This includes usages of creat() in the case
  where existing regular files are overwritten.

  Additionally, this introduces a new Landlock security blob associated
  with opened files, to track the available Landlock access rights at
  the time of opening the file. This is in line with Unix's general
  approach of checking the read and write permissions during open(), and
  associating this previously checked authorization with the opened
  file. An ongoing patch documents this use case [3].

  In order to treat truncate(2) and ftruncate(2) calls differently in an
  LSM hook, we split apart the existing security_path_truncate hook into
  security_path_truncate (for truncation by path) and
  security_file_truncate (for truncation of previously opened files)"

Link: https://lore.kernel.org/r/20221018182216.301684-1-gnoack3000@gmail.com [1]
Link: https://www.kernel.org/doc/html/v6.1/userspace-api/landlock.html#filesystem-flags [2]
Link: https://lore.kernel.org/r/20221209193813.972012-1-mic@digikod.net [3]

* tag 'landlock-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
  samples/landlock: Document best-effort approach for LANDLOCK_ACCESS_FS_REFER
  landlock: Document Landlock's file truncation support
  samples/landlock: Extend sample tool to support LANDLOCK_ACCESS_FS_TRUNCATE
  selftests/landlock: Test ftruncate on FDs created by memfd_create(2)
  selftests/landlock: Test FD passing from restricted to unrestricted processes
  selftests/landlock: Locally define __maybe_unused
  selftests/landlock: Test open() and ftruncate() in multiple scenarios
  selftests/landlock: Test file truncation support
  landlock: Support file truncation
  landlock: Document init_layer_masks() helper
  landlock: Refactor check_access_path_dual() into is_access_to_paths_allowed()
  security: Create file_truncate hook from path_truncate hook

Pull dma-mapping updates from Christoph Hellwig:

 - reduce the swiotlb buffer size on allocation failure (Alexey
   Kardashevskiy)

 - clean up passing of bogus GFP flags to the dma-coherent allocator
   (Christoph Hellwig)

* tag 'dma-mapping-6.2-2022-12-13' of git://git.infradead.org/users/hch/dma-mapping:
  dma-mapping: reject __GFP_COMP in dma_alloc_attrs
  ALSA: memalloc: don't pass bogus GFP_ flags to dma_alloc_*
  s390/ism: don't pass bogus GFP_ flags to dma_alloc_coherent
  cnic: don't pass bogus GFP_ flags to dma_alloc_coherent
  RDMA/qib: don't pass bogus GFP_ flags to dma_alloc_coherent
  RDMA/hfi1: don't pass bogus GFP_ flags to dma_alloc_coherent
  media: videobuf-dma-contig: use dma_mmap_coherent
  swiotlb: reduce the swiotlb buffer size on allocation failure

Pull configfs updates from Christoph Hellwig:

 - fix a memory leak in configfs_create_dir (Chen Zhongjin)

 - remove mentions of committable items that were implemented (Bartosz
   Golaszewski)

* tag 'configfs-6.2-2022-12-13' of git://git.infradead.org/users/hch/configfs:
  configfs: remove mentions of committable items
  configfs: fix possible memory leak in configfs_create_dir()

Pull NFS client updates from Trond Myklebust
 "Bugfixes:
   - Fix NULL pointer dereference in the mount parser
   - Fix memory stomp in decode_attr_security_label
   - Fix credential leak in _nfs4_discover_trunking()
   - Fix buffer leak in rpcrdma_req_create()
   - Fix leaked socket in rpc_sockname()
   - Fix deadlock between nfs4_open_recover_helper() and delegreturn
   - Fix an Oops in nfs_d_automount()
   - Fix potential race in nfs_call_unlink()
   - Multiple fixes for the open context mode
   - NFSv4.2 READ_PLUS fixes
   - Fix a regression in which small rsize/wsize values are being
     forbidden
   - Fail client initialisation if the NFSv4.x state manager thread
     can't run
   - Avoid spurious warning of lost lock that is being unlocked.
   - Ensure the initialisation of struct nfs4_label

  Features and cleanups:
   - Trigger the "ls -l" readdir heuristic sooner
   - Clear the file access cache upon login to ensure supplementary
     group info is in sync between the client and server
   - pnfs: Fix up the logging of layout stateids
   - NFSv4.2: Change the default KConfig value for READ_PLUS
   - Use sysfs_emit() instead of scnprintf() where appropriate"

* tag 'nfs-for-6.2-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (24 commits)
  NFSv4.2: Change the default KConfig value for READ_PLUS
  NFSv4.x: Fail client initialisation if state manager thread can't run
  fs: nfs: sysfs: use sysfs_emit() to instead of scnprintf()
  NFS: use sysfs_emit() to instead of scnprintf()
  NFS: Allow very small rsize & wsize again
  NFSv4.2: Fix up READ_PLUS alignment
  NFSv4.2: Set the correct size scratch buffer for decoding READ_PLUS
  SUNRPC: Fix missing release socket in rpc_sockname()
  xprtrdma: Fix regbuf data not freed in rpcrdma_req_create()
  NFS: avoid spurious warning of lost lock that is being unlocked.
  nfs: fix possible null-ptr-deref when parsing param
  NFSv4: check FMODE_EXEC from open context mode in nfs4_opendata_access()
  NFS: make sure open context mode have FMODE_EXEC when file open for exec
  NFS4.x/pnfs: Fix up logging of layout stateids
  NFS: Fix a race in nfs_call_unlink()
  NFS: Fix an Oops in nfs_d_automount()
  NFSv4: Fix a deadlock between nfs4_open_recover_helper() and delegreturn
  NFSv4: Fix a credential leak in _nfs4_discover_trunking()
  NFS: Trigger the "ls -l" readdir heuristic sooner
  NFSv4.2: Fix initialisation of struct nfs4_label
  ...

Pull nfsd updates from Chuck Lever:
 "This release introduces support for the CB_RECALL_ANY operation. NFSD
  can send this operation to request that clients return any delegations
  they choose. The server uses this operation to handle low memory
  scenarios or indicate to a client when that client has reached the
  maximum number of delegations the server supports.

  The NFSv4.2 READ_PLUS operation has been simplified temporarily whilst
  support for sparse files in local filesystems and the VFS is improved.

  Two major data structure fixes appear in this release:

   - The nfs4_file hash table is replaced with a resizable hash table to
     reduce the latency of NFSv4 OPEN operations.

   - Reference counting in the NFSD filecache has been hardened against
     races.

  In furtherance of removing support for NFSv2 in a subsequent kernel
  release, a new Kconfig option enables server-side support for NFSv2 to
  be left out of a kernel build.

  MAINTAINERS has been updated to indicate that changes to fs/exportfs
  should go through the NFSD tree"

* tag 'nfsd-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (49 commits)
  NFSD: Avoid clashing function prototypes
  SUNRPC: Fix crasher in unwrap_integ_data()
  SUNRPC: Make the svc_authenticate tracepoint conditional
  NFSD: Use only RQ_DROPME to signal the need to drop a reply
  SUNRPC: Clean up xdr_write_pages()
  SUNRPC: Don't leak netobj memory when gss_read_proxy_verf() fails
  NFSD: add CB_RECALL_ANY tracepoints
  NFSD: add delegation reaper to react to low memory condition
  NFSD: add support for sending CB_RECALL_ANY
  NFSD: refactoring courtesy_client_reaper to a generic low memory shrinker
  trace: Relocate event helper files
  NFSD: pass range end to vfs_fsync_range() instead of count
  lockd: fix file selection in nlmsvc_cancel_blocked
  lockd: ensure we use the correct file descriptor when unlocking
  lockd: set missing fl_flags field when retrieving args
  NFSD: Use struct_size() helper in alloc_session()
  nfsd: return error if nfs4_setacl fails
  lockd: set other missing fields when unlocking files
  NFSD: Add an nfsd_file_fsync tracepoint
  sunrpc: svc: Remove an unused static function svc_ungetu32()
  ...

Pull btrfs updates from David Sterba:
 "This round there are a lot of cleanups and moved code so the diffstat
  looks huge, otherwise there are some nice performance improvements and
  an update to raid56 reliability.

  User visible features:

   - raid56 reliability vs performance trade off:
      - fix destructive RMW for raid5 data (raid6 still needs work): do
        full checksum verification for all data during RMW cycle, this
        should prevent rewriting potentially corrupted data without
        notice
      - stripes are cached in memory which should reduce the performance
        impact but still can hurt some workloads
      - checksums are verified after repair again
      - this is the last option without introducing additional features
        (write intent bitmap, journal, another tree), the extra checksum
        read/verification was supposed to be avoided by the original
        implementation exactly for performance reasons but that caused
        all the reliability problems

   - discard=async by default for devices that support it

   - implement emergency flush reserve to avoid almost all unnecessary
     transaction aborts due to ENOSPC in cases where there are too many
     delayed refs or delayed allocation

   - skip block group synchronization if there's no change in used
     bytes, can reduce transaction commit count for some workloads

  Performance improvements:

   - fiemap and lseek:
      - overall speedup due to skipping unnecessary or duplicate
        searches (-40% run time)
      - cache some data structures and sharedness of extents (-30% run
        time)

   - send:
      - faster backref resolution when finding clones
      - cached leaf to root mapping for faster backref walking
      - improved clone/sharing detection
      - overall run time improvements (-70%)

  Core:

   - module initialization converted to a table of function pointers run
     in a sequence

   - preparation for fscrypt, extend passing file names across calls,
     dir item can store encryption status

   - raid56 updates:
      - more accurate error tracking of sectors within stripe
      - simplify recovery path and remove dedicated endio worker kthread
      - simplify scrub call paths
      - refactoring to support the extra data checksum verification
        during RMW cycle

   - tree block parentness checks consolidated and done at metadata read
     time

   - improved error handling

   - cleanups:
      - move a lot of code for better synchronization between kernel and
        user space sources, split big files
      - enum cleanups
      - GFP flag cleanups
      - header file cleanups, prototypes, dependencies
      - redundant parameter cleanups
      - inline extent handling simplifications
      - inode parameter conversion
      - data structure cleanups, reductions, renames, merges"

* tag 'for-6.2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (249 commits)
  btrfs: print transaction aborted messages with an error level
  btrfs: sync some cleanups from progs into uapi/btrfs.h
  btrfs: do not BUG_ON() on ENOMEM when dropping extent items for a range
  btrfs: fix extent map use-after-free when handling missing device in read_one_chunk
  btrfs: remove outdated logic from overwrite_item() and add assertion
  btrfs: unify overwrite_item() and do_overwrite_item()
  btrfs: replace strncpy() with strscpy()
  btrfs: fix uninitialized variable in find_first_clear_extent_bit
  btrfs: fix uninitialized parent in insert_state
  btrfs: add might_sleep() annotations
  btrfs: add stack helpers for a few btrfs items
  btrfs: add nr_global_roots to the super block definition
  btrfs: remove BTRFS_LEAF_DATA_OFFSET
  btrfs: add helpers for manipulating leaf items and data
  btrfs: add eb to btrfs_node_key_ptr_offset
  btrfs: pass the extent buffer for the btrfs_item_nr helpers
  btrfs: move the csum helpers into ctree.h
  btrfs: move eb offset helpers into extent_io.h
  btrfs: move file_extent_item helpers into file-item.h
  btrfs: move leaf_data_end into ctree.c
  ...

Pull dlm updates from David Teigland:
 "These patches include the usual cleanups and minor fixes, the removal
  of code that is no longer needed due to recent improvements, and
  improvements to processing large volumes of messages during heavy
  locking activity.

  Summary:

   - Misc code cleanup

   - Fix a couple of socket handling bugs: a double release on an error
     path and a data-ready race in an accept loop

   - Remove code for resending dir-remove messages. This code is no
     longer needed since the midcomms layer now ensures the messages are
     resent if needed

   - Add tracepoints for dlm messages

   - Improve callback queueing by replacing the fixed array with a list

   - Simplify the handling of a remove message followed by a lookup
     message by sending both without releasing a spinlock in between

   - Improve the concurrency of sending and receiving messages by
     holding locks for a shorter time, and changing how workqueues are
     used

   - Remove old code for shutting down sockets, which is no longer
     needed with the reliable connection handling that was recently
     added"

* tag 'dlm-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm: (37 commits)
  fs: dlm: fix building without lockdep
  fs: dlm: parallelize lowcomms socket handling
  fs: dlm: don't init error value
  fs: dlm: use saved sk_error_report()
  fs: dlm: use sock2con without checking null
  fs: dlm: remove dlm_node_addrs lookup list
  fs: dlm: don't put dlm_local_addrs on heap
  fs: dlm: cleanup listen sock handling
  fs: dlm: remove socket shutdown handling
  fs: dlm: use listen sock as dlm running indicator
  fs: dlm: use list_first_entry_or_null
  fs: dlm: remove twice INIT_WORK
  fs: dlm: add midcomms init/start functions
  fs: dlm: add dst nodeid for msg tracing
  fs: dlm: rename seq to h_seq for msg tracing
  fs: dlm: rename DLM_IFL_NEED_SCHED to DLM_IFL_CB_PENDING
  fs: dlm: ast do WARN_ON_ONCE() on hotpath
  fs: dlm: drop lkb ref in bug case
  fs: dlm: avoid false-positive checker warning
  fs: dlm: use WARN_ON_ONCE() instead of WARN_ON()
  ...

Pull jfs updates from David Kleikamp:
 "Assorted JFS fixes for 6.2"

* tag 'jfs-6.2' of https://github.com/kleikamp/linux-shaggy:
  jfs: makes diUnmount/diMount in jfs_mount_rw atomic
  jfs: Fix a typo in function jfs_umount
  fs: jfs: fix shift-out-of-bounds in dbDiscardAG
  jfs: Fix fortify moan in symlink
  jfs: remove redundant assignments to ipaimap and ipaimap2
  jfs: remove unused declarations for jfs
  fs/jfs/jfs_xattr.h: Fix spelling typo in comment
  MAINTAINERS: git://github -> https://github.com for kleikamp
  fs/jfs: replace ternary operator with min_t()
  fs: jfs: fix shift-out-of-bounds in dbAllocAG

Pull udf and ext2 fixes from Jan Kara:

 - a couple of smaller cleanups and fixes for ext2

 - fixes of a data corruption issues in udf when handling holes and
   preallocation extents

 - fixes and cleanups of several smaller issues in udf

 - add maintainer entry for isofs

* tag 'fixes_for_v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  udf: Fix extending file within last block
  udf: Discard preallocation before extending file with a hole
  udf: Do not bother looking for prealloc extents if i_lenExtents matches i_size
  udf: Fix preallocation discarding at indirect extent boundary
  udf: Increase UDF_MAX_READ_VERSION to 0x0260
  fs/ext2: Fix code indentation
  ext2: unbugger ext2_empty_dir()
  udf: remove ->writepage
  ext2: remove ->writepage
  ext2: Don't flush page immediately for DIRSYNC directories
  ext2: Fix some kernel-doc warnings
  maintainers: Add ISOFS entry
  udf: Avoid double brelse() in udf_rename()
  fs: udf: Optimize udf_free_in_core_inode and udf_find_fileset function

Merge tag 'fs.xattr.simple.noaudit.v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping

Pull xattr audit fix from Seth Forshee:
 "This is a single patch to remove auditing of the capability check in
  simple_xattr_list().

  This check is done to check whether trusted xattrs should be included
  by listxattr(2). SELinux will normally log a denial when capable() is
  called and the task's SELinux context doesn't have the corresponding
  capability permission allowed, which can end up spamming the log.

  Since a failed check here cannot be used to infer malicious intent,
  auditing is of no real value, and it makes sense to stop auditing the
  capability check"

* tag 'fs.xattr.simple.noaudit.v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping:
  fs: don't audit the capability check in simple_xattr_list()

Merge tag 'fs.idmapped.squashfs.v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping

Pull squashfs update from Seth Forshee:
 "This is a simple patch to enable idmapped mounts for squashfs.

  All functionality squashfs needs to support idmapped mounts is already
  implemented in generic VFS code, so all that is needed is to set
  FS_ALLOW_IDMAP in fs_flags"

* tag 'fs.idmapped.squashfs.v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping:
  squashfs: enable idmapped mounts

Pull fuse update from Miklos Szeredi:

 - Allow some write requests to proceed in parallel

 - Fix a performance problem with allow_sys_admin_access

 - Add a special kind of invalidation that doesn't immediately purge
   submounts

 - On revalidation treat the target of rename(RENAME_NOREPLACE) the same
   as open(O_EXCL)

 - Use type safe helpers for some mnt_userns transformations

* tag 'fuse-update-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
  fuse: Rearrange fuse_allow_current_process checks
  fuse: allow non-extending parallel direct writes on the same file
  fuse: remove the unneeded result variable
  fuse: port to vfs{g,u}id_t and associated helpers
  fuse: Remove user_ns check for FUSE_DEV_IOC_CLONE
  fuse: always revalidate rename target dentry
  fuse: add "expire only" mode to FUSE_NOTIFY_INVAL_ENTRY
  fs/fuse: Replace kmap() with kmap_local_page()

Pull overlayfs update from Miklos Szeredi:

 - Fix a couple of bugs found by syzbot

 - Don't ingore some open flags set by fcntl(F_SETFL)

 - Fix failure to create a hard link in certain cases

 - Use type safe helpers for some mnt_userns transformations

 - Improve performance of mount

 - Misc cleanups

* tag 'ovl-update-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
  ovl: Kconfig: Fix spelling mistake "undelying" -> "underlying"
  ovl: use inode instead of dentry where possible
  ovl: Add comment on upperredirect reassignment
  ovl: use plain list filler in indexdir and workdir cleanup
  ovl: do not reconnect upper index records in ovl_indexdir_cleanup()
  ovl: fix comment typos
  ovl: port to vfs{g,u}id_t and associated helpers
  ovl: Use ovl mounter's fsuid and fsgid in ovl_link()
  ovl: Use "buf" flexible array for memcpy() destination
  ovl: update ->f_iocb_flags when ovl_change_flags() modifies ->f_flags
  ovl: fix use inode directly in rcu-walk mode

Pull erofs updates from Gao Xiang:
 "In this cycle, large folios are now enabled in the iomap/fscache mode
  for uncompressed files first. In order to do that, we've also cleaned
  up better interfaces between erofs and fscache, which are acked by
  fscache/netfs folks and included in this pull request.

  Other than that, there are random fixes around erofs over fscache and
  crafted images by syzbot, minor cleanups and documentation updates.

  Summary:

   - Enable large folios for iomap/fscache mode

   - Avoid sysfs warning due to mounting twice with the same fsid and
     domain_id in fscache mode

   - Refine fscache interface among erofs, fscache, and cachefiles

   - Use kmap_local_page() only for metabuf

   - Fixes around crafted images found by syzbot

   - Minor cleanups and documentation updates"

* tag 'erofs-for-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
  erofs: validate the extent length for uncompressed pclusters
  erofs: fix missing unmap if z_erofs_get_extent_compressedlen() fails
  erofs: Fix pcluster memleak when its block address is zero
  erofs: use kmap_local_page() only for erofs_bread()
  erofs: enable large folios for fscache mode
  erofs: support large folios for fscache mode
  erofs: switch to prepare_ondemand_read() in fscache mode
  fscache,cachefiles: add prepare_ondemand_read() callback
  erofs: clean up cached I/O strategies
  erofs: update documentation
  erofs: check the uniqueness of fsid in shared domain in advance
  erofs: enable large folios for iomap mode

Pull fsverity updates from Eric Biggers:
 "The main change this cycle is to stop using the PG_error flag to track
  verity failures, and instead just track failures at the bio level.
  This follows a similar fscrypt change that went into 6.1, and it is a
  step towards freeing up PG_error for other uses.

  There's also one other small cleanup"

* tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt:
  fsverity: simplify fsverity_get_digest()
  fsverity: stop using PG_error to track error status

Pull fscrypt updates from Eric Biggers:
 "This release adds SM4 encryption support, contributed by Tianjia
  Zhang. SM4 is a Chinese block cipher that is an alternative to AES.

  I recommend against using SM4, but (according to Tianjia) some people
  are being required to use it. Since SM4 has been turning up in many
  other places (crypto API, wireless, TLS, OpenSSL, ARMv8 CPUs, etc.),
  it hasn't been very controversial, and some people have to use it, I
  don't think it would be fair for me to reject this optional feature.

  Besides the above, there are a couple cleanups"

* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt:
  fscrypt: add additional documentation for SM4 support
  fscrypt: remove unused Speck definitions
  fscrypt: Add SM4 XTS/CTS symmetric algorithm support
  blk-crypto: Add support for SM4-XTS blk crypto mode
  fscrypt: add comment for fscrypt_valid_enc_modes_v1()
  fscrypt: pass super_block to fscrypt_put_master_key_activeref()

Pull ext4 updates from Ted Ts'o:
 "A large number of cleanups and bug fixes, with many of the bug fixes
  found by Syzbot and fuzzing. (Many of the bug fixes involve less-used
  ext4 features such as fast_commit, inline_data and bigalloc)

  In addition, remove the writepage function for ext4, since the
  medium-term plan is to remove ->writepage() entirely. (The VM doesn't
  need or want writepage() for writeback, since it is fine with
  ->writepages() so long as ->migrate_folio() is implemented)"

* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (58 commits)
  ext4: fix reserved cluster accounting in __es_remove_extent()
  ext4: fix inode leak in ext4_xattr_inode_create() on an error path
  ext4: allocate extended attribute value in vmalloc area
  ext4: avoid unaccounted block allocation when expanding inode
  ext4: initialize quota before expanding inode in setproject ioctl
  ext4: stop providing .writepage hook
  mm: export buffer_migrate_folio_norefs()
  ext4: switch to using write_cache_pages() for data=journal writeout
  jbd2: switch jbd2_submit_inode_data() to use fs-provided hook for data writeout
  ext4: switch to using ext4_do_writepages() for ordered data writeout
  ext4: move percpu_rwsem protection into ext4_writepages()
  ext4: provide ext4_do_writepages()
  ext4: add support for writepages calls that cannot map blocks
  ext4: drop pointless IO submission from ext4_bio_write_page()
  ext4: remove nr_submitted from ext4_bio_write_page()
  ext4: move keep_towrite handling to ext4_bio_write_page()
  ext4: handle redirtying in ext4_bio_write_page()
  ext4: fix kernel BUG in 'ext4_write_inline_data_end()'
  ext4: make ext4_mb_initialize_context return void
  ext4: fix deadlock due to mbcache entry corruption
  ...

Merge tag 'fs.idmapped.mnt_idmap.v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping

Pull idmapping updates from Christian Brauner:
 "Last cycle we've already made the interaction with idmapped mounts
  more robust and type safe by introducing the vfs{g,u}id_t type. This
  cycle we concluded the conversion and removed the legacy helpers.

  Currently we still pass around the plain namespace that was attached
  to a mount. This is in general pretty convenient but it makes it easy
  to conflate namespaces that are relevant on the filesystem - with
  namespaces that are relevent on the mount level. Especially for
  filesystem developers without detailed knowledge in this area this can
  be a potential source for bugs.

  Instead of passing the plain namespace we introduce a dedicated type
  struct mnt_idmap and replace the pointer with a pointer to a struct
  mnt_idmap. There are no semantic or size changes for the mount struct
  caused by this.

  We then start converting all places aware of idmapped mounts to rely
  on struct mnt_idmap. Once the conversion is done all helpers down to
  the really low-level make_vfs{g,u}id() and from_vfs{g,u}id() will take
  a struct mnt_idmap argument instead of two namespace arguments. This
  way it becomes impossible to conflate the two removing and thus
  eliminating the possibility of any bugs. Fwiw, I fixed some issues in
  that area a while ago in ntfs3 and ksmbd in the past. Afterwards only
  low-level code can ultimately use the associated namespace for any
  permission checks. Even most of the vfs can be completely obivious
  about this ultimately and filesystems will never interact with it in
  any form in the future.

  A struct mnt_idmap currently encompasses a simple refcount and pointer
  to the relevant namespace the mount is idmapped to. If a mount isn't
  idmapped then it will point to a static nop_mnt_idmap and if it
  doesn't that it is idmapped. As usual there are no allocations or
  anything happening for non-idmapped mounts. Everthing is carefully
  written to be a nop for non-idmapped mounts as has always been the
  case.

  If an idmapped mount is created a struct mnt_idmap is allocated and a
  reference taken on the relevant namespace. Each mount that gets
  idmapped or inherits the idmap simply bumps the reference count on
  struct mnt_idmap. Just a reminder that we only allow a mount to change
  it's idmapping a single time and only if it hasn't already been
  attached to the filesystems and has no active writers.

  The actual changes are fairly straightforward but this will have huge
  benefits for maintenance and security in the long run even if it
  causes some churn.

  Note that this also makes it possible to extend struct mount_idmap in
  the future. For example, it would be possible to place the namespace
  pointer in an anonymous union together with an idmapping struct. This
  would allow us to expose an api to userspace that would let it specify
  idmappings directly instead of having to go through the detour of
  setting up namespaces at all"

* tag 'fs.idmapped.mnt_idmap.v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping:
  acl: conver higher-level helpers to rely on mnt_idmap
  fs: introduce dedicated idmap type for mounts

Merge tag 'fs.vfsuid.conversion.v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping

Pull vfsuid updates from Christian Brauner:
 "Last cycle we introduced the vfs{g,u}id_t types and associated helpers
  to gain type safety when dealing with idmapped mounts. That initial
  work already converted a lot of places over but there were still some
  left,

  This converts all remaining places that still make use of non-type
  safe idmapping helpers to rely on the new type safe vfs{g,u}id based
  helpers.

  Afterwards it removes all the old non-type safe helpers"

* tag 'fs.vfsuid.conversion.v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping:
  fs: remove unused idmapping helpers
  ovl: port to vfs{g,u}id_t and associated helpers
  fuse: port to vfs{g,u}id_t and associated helpers
  ima: use type safe idmapping helpers
  apparmor: use type safe idmapping helpers
  caps: use type safe idmapping helpers
  fs: use type safe idmapping helpers
  mnt_idmapping: add missing helpers

Pull setgid inheritance updates from Christian Brauner:
 "This contains the work to make setgid inheritance consistent between
  modifying a file and when changing ownership or mode as this has been
  a repeated source of very subtle bugs. The gist is that we perform the
  same permission checks in the write path as we do in the ownership and
  mode changing paths after this series where we're currently doing
  different things.

  We've already made setgid inheritance a lot more consistent and
  reliable in the last releases by moving setgid stripping from the
  individual filesystems up into the vfs. This aims to make the logic
  even more consistent and easier to understand and also to fix
  long-standing overlayfs setgid inheritance bugs. Miklos was nice
  enough to just let me carry the trivial overlayfs patches from Amir
  too.

  Below is a more detailed explanation how the current difference in
  setgid handling lead to very subtle bugs exemplified via overlayfs
  which is a victim of the current rules. I hope this explains why I
  think taking the regression risk here is worth it.

  A long while ago I found a few setgid inheritance bugs in overlayfs in
  the write path in certain conditions. Amir recently picked this back
  up in [1] and I jumped on board to fix this more generally.

  On the surface all that overlayfs would need to fix setgid inheritance
  would be to call file_remove_privs() or file_modified() but actually
  that isn't enough because the setgid inheritance api is wildly
  inconsistent in that area.

  Before this pr setgid stripping in file_remove_privs()'s old
  should_remove_suid() helper was inconsistent with other parts of the
  vfs. Specifically, it only raises ATTR_KILL_SGID if the inode is
  S_ISGID and S_IXGRP but not if the inode isn't in the caller's groups
  and the caller isn't privileged over the inode although we require
  this already in setattr_prepare() and setattr_copy() and so all
  filesystem implement this requirement implicitly because they have to
  use setattr_{prepare,copy}() anyway.

  But the inconsistency shows up in setgid stripping bugs for overlayfs
  in xfstests (e.g., generic/673, generic/683, generic/685, generic/686,
  generic/687). For example, we test whether suid and setgid stripping
  works correctly when performing various write-like operations as an
  unprivileged user (fallocate, reflink, write, etc.):

      echo "Test 1 - qa_user, non-exec file $verb"
      setup_testfile
      chmod a+rws $junk_file
      commit_and_check "$qa_user" "$verb" 64k 64k

  The test basically creates a file with 6666 permissions. While the
  file has the S_ISUID and S_ISGID bits set it does not have the S_IXGRP
  set.

  On a regular filesystem like xfs what will happen is:

      sys_fallocate()
      -> vfs_fallocate()
         -> xfs_file_fallocate()
            -> file_modified()
               -> __file_remove_privs()
                  -> dentry_needs_remove_privs()
                     -> should_remove_suid()
                  -> __remove_privs()
                     newattrs.ia_valid = ATTR_FORCE | kill;
                     -> notify_change()
                        -> setattr_copy()

  In should_remove_suid() we can see that ATTR_KILL_SUID is raised
  unconditionally because the file in the test has S_ISUID set.

  But we also see that ATTR_KILL_SGID won't be set because while the
  file is S_ISGID it is not S_IXGRP (see above) which is a condition for
  ATTR_KILL_SGID being raised.

  So by the time we call notify_change() we have attr->ia_valid set to
  ATTR_KILL_SUID | ATTR_FORCE.

  Now notify_change() sees that ATTR_KILL_SUID is set and does:

      ia_valid      = attr->ia_valid |= ATTR_MODE
      attr->ia_mode = (inode->i_mode & ~S_ISUID);

  which means that when we call setattr_copy() later we will definitely
  update inode->i_mode. Note that attr->ia_mode still contains S_ISGID.

  Now we call into the filesystem's ->setattr() inode operation which
  will end up calling setattr_copy(). Since ATTR_MODE is set we will
  hit:

      if (ia_valid & ATTR_MODE) {
              umode_t mode = attr->ia_mode;
              vfsgid_t vfsgid = i_gid_into_vfsgid(mnt_userns, inode);
              if (!vfsgid_in_group_p(vfsgid) &&
                  !capable_wrt_inode_uidgid(mnt_userns, inode, CAP_FSETID))
                      mode &= ~S_ISGID;
              inode->i_mode = mode;
      }

  and since the caller in the test is neither capable nor in the group
  of the inode the S_ISGID bit is stripped.

  But assume the file isn't suid then ATTR_KILL_SUID won't be raised
  which has the consequence that neither the setgid nor the suid bits
  are stripped even though it should be stripped because the inode isn't
  in the caller's groups and the caller isn't privileged over the inode.

  If overlayfs is in the mix things become a bit more complicated and
  the bug shows up more clearly.

  When e.g., ovl_setattr() is hit from ovl_fallocate()'s call to
  file_remove_privs() then ATTR_KILL_SUID and ATTR_KILL_SGID might be
  raised but because the check in notify_change() is questioning the
  ATTR_KILL_SGID flag again by requiring S_IXGRP for it to be stripped
  the S_ISGID bit isn't removed even though it should be stripped:

      sys_fallocate()
      -> vfs_fallocate()
         -> ovl_fallocate()
            -> file_remove_privs()
               -> dentry_needs_remove_privs()
                  -> should_remove_suid()
               -> __remove_privs()
                  newattrs.ia_valid = ATTR_FORCE | kill;
                  -> notify_change()
                     -> ovl_setattr()
                        /* TAKE ON MOUNTER'S CREDS */
                        -> ovl_do_notify_change()
                           -> notify_change()
                        /* GIVE UP MOUNTER'S CREDS */
           /* TAKE ON MOUNTER'S CREDS */
           -> vfs_fallocate()
              -> xfs_file_fallocate()
                 -> file_modified()
                    -> __file_remove_privs()
                       -> dentry_needs_remove_privs()
                          -> should_remove_suid()
                       -> __remove_privs()
                          newattrs.ia_valid = attr_force | kill;
                          -> notify_change()

  The fix for all of this is to make file_remove_privs()'s
  should_remove_suid() helper perform the same checks as we already
  require in setattr_prepare() and setattr_copy() and have
  notify_change() not pointlessly requiring S_IXGRP again. It doesn't
  make any sense in the first place because the caller must calculate
  the flags via should_remove_suid() anyway which would raise
  ATTR_KILL_SGID

  Note that some xfstests will now fail as these patches will cause the
  setgid bit to be lost in certain conditions for unprivileged users
  modifying a setgid file when they would've been kept otherwise. I
  think this risk is worth taking and I explained and mentioned this
  multiple times on the list [2].

  Enforcing the rules consistently across write operations and
  chmod/chown will lead to losing the setgid bit in cases were it
  might've been retained before.

  While I've mentioned this a few times but it's worth repeating just to
  make sure that this is understood. For the sake of maintainability,
  consistency, and security this is a risk worth taking.

  If we really see regressions for workloads the fix is to have special
  setgid handling in the write path again with different semantics from
  chmod/chown and possibly additional duct tape for overlayfs. I'll
  update the relevant xfstests with if you should decide to merge this
  second setgid cleanup.

  Before that people should be aware that there might be failures for
  fstests where unprivileged users modify a setgid file"

Link: https://lore.kernel.org/linux-fsdevel/20221003123040.900827-1-amir73il@gmail.com [1]
Link: https://lore.kernel.org/linux-fsdevel/20221122142010.zchf2jz2oymx55qi@wittgenstein [2]

* tag 'fs.ovl.setgid.v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping:
  fs: use consistent setgid checks in is_sxid()
  ovl: remove privs in ovl_fallocate()
  ovl: remove privs in ovl_copyfile()
  attr: use consistent sgid stripping checks
  attr: add setattr_should_drop_sgid()
  fs: move should_remove_suid()
  attr: add in_group_or_capable()

Pull VFS acl updates from Christian Brauner:
 "This contains the work that builds a dedicated vfs posix acl api.

  The origins of this work trace back to v5.19 but it took quite a while
  to understand the various filesystem specific implementations in
  sufficient detail and also come up with an acceptable solution.

  As we discussed and seen multiple times the current state of how posix
  acls are handled isn't nice and comes with a lot of problems: The
  current way of handling posix acls via the generic xattr api is error
  prone, hard to maintain, and type unsafe for the vfs until we call
  into the filesystem's dedicated get and set inode operations.

  It is already the case that posix acls are special-cased to death all
  the way through the vfs. There are an uncounted number of hacks that
  operate on the uapi posix acl struct instead of the dedicated vfs
  struct posix_acl. And the vfs must be involved in order to interpret
  and fixup posix acls before storing them to the backing store, caching
  them, reporting them to userspace, or for permission checking.

  Currently a range of hacks and duct tape exist to make this work. As
  with most things this is really no ones fault it's just something that
  happened over time. But the code is hard to understand and difficult
  to maintain and one is constantly at risk of introducing bugs and
  regressions when having to touch it.

  Instead of continuing to hack posix acls through the xattr handlers
  this series builds a dedicated posix acl api solely around the get and
  set inode operations.

  Going forward, the vfs_get_acl(), vfs_remove_acl(), and vfs_set_acl()
  helpers must be used in order to interact with posix acls. They
  operate directly on the vfs internal struct posix_acl instead of
  abusing the uapi posix acl struct as we currently do. In the end this
  removes all of the hackiness, makes the codepaths easier to maintain,
  and gets us type safety.

  This series passes the LTP and xfstests suites without any
  regressions. For xfstests the following combinations were tested:
   - xfs
   - ext4
   - btrfs
   - overlayfs
   - overlayfs on top of idmapped mounts
   - orangefs
   - (limited) cifs

  There's more simplifications for posix acls that we can make in the
  future if the basic api has made it.

  A few implementation details:

   - The series makes sure to retain exactly the same security and
     integrity module permission checks. Especially for the integrity
     modules this api is a win because right now they convert the uapi
     posix acl struct passed to them via a void pointer into the vfs
     struct posix_acl format to perform permission checking on the mode.

     There's a new dedicated security hook for setting posix acls which
     passes the vfs struct posix_acl not a void pointer. Basing checking
     on the posix acl stored in the uapi format is really unreliable.
     The vfs currently hacks around directly in the uapi struct storing
     values that frankly the security and integrity modules can't
     correctly interpret as evidenced by bugs we reported and fixed in
     this area. It's not necessarily even their fault it's just that the
     format we provide to them is sub optimal.

   - Some filesystems like 9p and cifs need access to the dentry in
     order to get and set posix acls which is why they either only
     partially or not even at all implement get and set inode
     operations. For example, cifs allows setxattr() and getxattr()
     operations but doesn't allow permission checking based on posix
     acls because it can't implement a get acl inode operation.

     Thus, this patch series updates the set acl inode operation to take
     a dentry instead of an inode argument. However, for the get acl
     inode operation we can't do this as the old get acl method is
     called in e.g., generic_permission() and inode_permission(). These
     helpers in turn are called in various filesystem's permission inode
     operation. So passing a dentry argument to the old get acl inode
     operation would amount to passing a dentry to the permission inode
     operation which we shouldn't and probably can't do.

     So instead of extending the existing inode operation Christoph
     suggested to add a new one. He also requested to ensure that the
     get and set acl inode operation taking a dentry are consistently
     named. So for this version the old get acl operation is renamed to
     ->get_inode_acl() and a new ->get_acl() inode operation taking a
     dentry is added. With this we can give both 9p and cifs get and set
     acl inode operations and in turn remove their complex custom posix
     xattr handlers.

     In the future I hope to get rid of the inode method duplication but
     it isn't like we have never had this situation. Readdir is just one
     example. And frankly, the overall gain in type safety and the more
     pleasant api wise are simply too big of a benefit to not accept
     this duplication for a while.

   - We've done a full audit of every codepaths using variant of the
     current generic xattr api to get and set posix acls and
     surprisingly it isn't that many places. There's of course always a
     chance that we might have missed some and if so I'm sure we'll find
     them soon enough.

     The crucial codepaths to be converted are obviously stacking
     filesystems such as ecryptfs and overlayfs.

     For a list of all callers currently using generic xattr api helpers
     see [2] including comments whether they support posix acls or not.

   - The old vfs generic posix acl infrastructure doesn't obey the
     create and replace semantics promised on the setxattr(2) manpage.
     This patch series doesn't address this. It really is something we
     should revisit later though.

  The patches are roughly organized as follows:

   (1) Change existing set acl inode operation to take a dentry
       argument (Intended to be a non-functional change)

   (2) Rename existing get acl method (Intended to be a non-functional
       change)

   (3) Implement get and set acl inode operations for filesystems that
       couldn't implement one before because of the missing dentry.
       That's mostly 9p and cifs (Intended to be a non-functional
       change)

   (4) Build posix acl api, i.e., add vfs_get_acl(), vfs_remove_acl(),
       and vfs_set_acl() including security and integrity hooks
       (Intended to be a non-functional change)

   (5) Implement get and set acl inode operations for stacking
       filesystems (Intended to be a non-functional change)

   (6) Switch posix acl handling in stacking filesystems to new posix
       acl api now that all filesystems it can stack upon support it.

   (7) Switch vfs to new posix acl api (semantical change)

   (8) Remove all now unused helpers

   (9) Additional regression fixes reported after we merged this into
       linux-next

  Thanks to Seth for a lot of good discussion around this and
  encouragement and input from Christoph"

* tag 'fs.acl.rework.v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping: (36 commits)
  posix_acl: Fix the type of sentinel in get_acl
  orangefs: fix mode handling
  ovl: call posix_acl_release() after error checking
  evm: remove dead code in evm_inode_set_acl()
  cifs: check whether acl is valid early
  acl: make vfs_posix_acl_to_xattr() static
  acl: remove a slew of now unused helpers
  9p: use stub posix acl handlers
  cifs: use stub posix acl handlers
  ovl: use stub posix acl handlers
  ecryptfs: use stub posix acl handlers
  evm: remove evm_xattr_acl_change()
  xattr: use posix acl api
  ovl: use posix acl api
  ovl: implement set acl method
  ovl: implement get acl method
  ecryptfs: implement set acl method
  ecryptfs: implement get acl method
  ksmbd: use vfs_remove_acl()
  acl: add vfs_remove_acl()
  ...

Pull misc vfs updates from Al Viro:
 "misc pile"

* tag 'pull-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  fs: sysv: Fix sysv_nblocks() returns wrong value
  get rid of INT_LIMIT, use type_max() instead
  btrfs: replace INT_LIMIT(loff_t) with OFFSET_MAX
  fs: simplify vfs_get_super
  fs: drop useless condition from inode_needs_update_time

Pull namespace fix from Al Viro:
 "Fix weird corner case in copy_mnt_ns()"

* tag 'pull-namespace' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  copy_mnt_ns(): handle a corner case (overmounted mntns bindings) saner

Pull iov_iter updates from Al Viro:
 "iov_iter work; most of that is about getting rid of direction
  misannotations and (hopefully) preventing more of the same for the
  future"

* tag 'pull-iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  use less confusing names for iov_iter direction initializers
  iov_iter: saner checks for attempt to copy to/from iterator
  [xen] fix "direction" argument of iov_iter_kvec()
  [vhost] fix 'direction' argument of iov_iter_{init,bvec}()
  [target] fix iov_iter_bvec() "direction" argument
  [s390] memcpy_real(): WRITE is "data source", not destination...
  [s390] zcore: WRITE is "data source", not destination...
  [infiniband] READ is "data destination", not source...
  [fsi] WRITE is "data source", not destination...
  [s390] copy_oldmem_kernel() - WRITE is "data source", not destination
  csum_and_copy_to_iter(): handle ITER_DISCARD
  get rid of unlikely() on page_copy_sane() calls

Pull alpha updates from Al Viro:
 "Alpha architecture cleanups and fixes.

  One thing *not* included is lazy FPU switching stuff - this pile is
  just the straightforward stuff"

* tag 'pull-alpha' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  alpha: ret_from_fork can go straight to ret_to_user
  alpha: syscall exit cleanup
  alpha: fix handling of a3 on straced syscalls
  alpha: fix syscall entry in !AUDUT_SYSCALL case
  alpha: _TIF_ALLWORK_MASK is unused
  alpha: fix TIF_NOTIFY_SIGNAL handling

Pull elf coredumping updates from Al Viro:
 "Unification of regset and non-regset sides of ELF coredump handling.

  Collecting per-thread register values is the only thing that needs to
  be ifdefed there..."

* tag 'pull-elfcore' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  [elf] get rid of get_note_info_size()
  [elf] unify regset and non-regset cases
  [elf][non-regset] use elf_core_copy_task_regs() for dumper as well
  [elf][non-regset] uninline elf_core_copy_task_fpregs() (and lose pt_regs argument)
  elf_core_copy_task_regs(): task_pt_regs is defined everywhere
  [elf][regset] simplify thread list handling in fill_note_info()
  [elf][regset] clean fill_note_info() a bit
  kill extern of vsyscall32_sysctl
  kill coredump_params->regs
  kill signal_pt_regs()

Pull non-MM updates from Andrew Morton:

 - A ptrace API cleanup series from Sergey Shtylyov

 - Fixes and cleanups for kexec from ye xingchen

 - nilfs2 updates from Ryusuke Konishi

 - squashfs feature work from Xiaoming Ni: permit configuration of the
   filesystem's compression concurrency from the mount command line

 - A series from Akinobu Mita which addresses bound checking errors when
   writing to debugfs files

 - A series from Yang Yingliang to address rapidio memory leaks

 - A series from Zheng Yejian to address possible overflow errors in
   encode_comp_t()

 - And a whole shower of singleton patches all over the place

* tag 'mm-nonmm-stable-2022-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (79 commits)
  ipc: fix memory leak in init_mqueue_fs()
  hfsplus: fix bug causing custom uid and gid being unable to be assigned with mount
  rapidio: devices: fix missing put_device in mport_cdev_open
  kcov: fix spelling typos in comments
  hfs: Fix OOB Write in hfs_asc2mac
  hfs: fix OOB Read in __hfs_brec_find
  relay: fix type mismatch when allocating memory in relay_create_buf()
  ocfs2: always read both high and low parts of dinode link count
  io-mapping: move some code within the include guarded section
  kernel: kcsan: kcsan_test: build without structleak plugin
  mailmap: update email for Iskren Chernev
  eventfd: change int to __u64 in eventfd_signal() ifndef CONFIG_EVENTFD
  rapidio: fix possible UAF when kfifo_alloc() fails
  relay: use strscpy() is more robust and safer
  cpumask: limit visibility of FORCE_NR_CPUS
  acct: fix potential integer overflow in encode_comp_t()
  acct: fix accuracy loss for input value of encode_comp_t()
  linux/init.h: include <linux/build_bug.h> and <linux/stringify.h>
  rapidio: rio: fix possible name leak in rio_register_mport()
  rapidio: fix possible name leaks when rio_add_device() fails
  ...

Pull documentation updates from Jonathan Corbet:
 "This was a not-too-busy cycle for documentation; highlights include:

   - The beginnings of a set of translations into Spanish, headed up by
     Carlos Bilbao

   - More Chinese translations

   - A change to the Sphinx "alabaster" theme by default for HTML
     generation.

     Unlike the previous default (Read the Docs), alabaster is shipped
     with Sphinx by default, reducing the number of other dependencies
     that need to be installed. It also (IMO) produces a cleaner and
     more readable result.

   - The ability to render the documentation into the texinfo format
     (something Sphinx could always do, we just never wired it up until
     now)

  Plus the usual collection of typo fixes, build-warning fixes, and
  minor updates"

* tag 'docs-6.2' of git://git.lwn.net/linux: (67 commits)
  Documentation/features: Use loongarch instead of loong
  Documentation/features-refresh.sh: Only sed the beginning "arch" of ARCH_DIR
  docs/zh_CN: Fix '.. only::' directive's expression
  docs/sp_SP: Add memory-barriers.txt Spanish translation
  docs/zh_CN/LoongArch: Update links of LoongArch ISA Vol1 and ELF psABI
  docs/LoongArch: Update links of LoongArch ISA Vol1 and ELF psABI
  Documentation/features: Update feature lists for 6.1
  Documentation: Fixed a typo in bootconfig.rst
  docs/sp_SP: Add process coding-style translation
  docs/sp_SP: Add kernel-docs.rst Spanish translation
  docs: Create translations/sp_SP/process/, move submitting-patches.rst
  docs: Add book to process/kernel-docs.rst
  docs: Retire old resources from kernel-docs.rst
  docs: Update maintainer of kernel-docs.rst
  Documentation: riscv: Document the sv57 VM layout
  Documentation: USB: correct possessive "its" usage
  math64: fix kernel-doc return value warnings
  math64: add kernel-doc for DIV64_U64_ROUND_UP
  math64: favor kernel-doc from header files
  doc: add texinfodocs and infodocs targets
  ...

Pull rust updates from Miguel Ojeda:
 "The first set of changes after the merge, the major ones being:

   - String and formatting: new types 'CString', 'CStr', 'BStr' and
     'Formatter'; new macros 'c_str!', 'b_str!' and 'fmt!'.

   - Errors: the rest of the error codes from 'errno-base.h', as well as
     some 'From' trait implementations for the 'Error' type.

   - Printing: the rest of the 'pr_*!' levels and the continuation one
     'pr_cont!', as well as a new sample.

   - 'alloc' crate: new constructors 'try_with_capacity()' and
     'try_with_capacity_in()' for 'RawVec' and 'Vec'.

   - Procedural macros: new macros '#[vtable]' and 'concat_idents!', as
     well as better ergonomics for 'module!' users.

   - Asserting: new macros 'static_assert!', 'build_error!' and
     'build_assert!', as well as a new crate 'build_error' to support
     them.

   - Vocabulary types: new types 'Opaque' and 'Either'.

   - Debugging: new macro 'dbg!'"

* tag 'rust-6.2' of https://github.com/Rust-for-Linux/linux: (28 commits)
  rust: types: add `Opaque` type
  rust: types: add `Either` type
  rust: build_assert: add `build_{error,assert}!` macros
  rust: add `build_error` crate
  rust: static_assert: add `static_assert!` macro
  rust: std_vendor: add `dbg!` macro based on `std`'s one
  rust: str: add `fmt!` macro
  rust: str: add `CString` type
  rust: str: add `Formatter` type
  rust: str: add `c_str!` macro
  rust: str: add `CStr` unit tests
  rust: str: implement several traits for `CStr`
  rust: str: add `CStr` type
  rust: str: add `b_str!` macro
  rust: str: add `BStr` type
  rust: alloc: add `Vec::try_with_capacity{,_in}()` constructors
  rust: alloc: add `RawVec::try_with_capacity_in()` constructor
  rust: prelude: add `error::code::*` constant items
  rust: error: add `From` implementations for `Error`
  rust: error: add codes from `errno-base.h`
  ...

Pull tracing tools updates from Steven Rostedt:

 - New tool "rv" for starting and stopping runtime verification.
   Example:

      ./rv mon wip -r printk -v

   Enables the wake-in-preempt monitor and the printk reactor in verbose
   mode

 - Fix exit status of rtla usage() calls

* tag 'trace-tools-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  Documentation/rv: Add verification/rv man pages
  tools/rv: Add in-kernel monitor interface
  rv: Add rv tool
  rtla: Fix exit status when returning from calls to usage()