1. 11 Mar, 2022 18 commits
  2. 10 Mar, 2022 22 commits
    • Ivan Vecera's avatar
      ice: Fix race condition during interface enslave · 5cb1ebdb
      Ivan Vecera authored
      Commit 5dbbbd01 ("ice: Avoid RTNL lock when re-creating
      auxiliary device") changes a process of re-creation of aux device
      so ice_plug_aux_dev() is called from ice_service_task() context.
      This unfortunately opens a race window that can result in dead-lock
      when interface has left LAG and immediately enters LAG again.
      
      Reproducer:
      ```
      #!/bin/sh
      
      ip link add lag0 type bond mode 1 miimon 100
      ip link set lag0
      
      for n in {1..10}; do
              echo Cycle: $n
              ip link set ens7f0 master lag0
              sleep 1
              ip link set ens7f0 nomaster
      done
      ```
      
      This results in:
      [20976.208697] Workqueue: ice ice_service_task [ice]
      [20976.213422] Call Trace:
      [20976.215871]  __schedule+0x2d1/0x830
      [20976.219364]  schedule+0x35/0xa0
      [20976.222510]  schedule_preempt_disabled+0xa/0x10
      [20976.227043]  __mutex_lock.isra.7+0x310/0x420
      [20976.235071]  enum_all_gids_of_dev_cb+0x1c/0x100 [ib_core]
      [20976.251215]  ib_enum_roce_netdev+0xa4/0xe0 [ib_core]
      [20976.256192]  ib_cache_setup_one+0x33/0xa0 [ib_core]
      [20976.261079]  ib_register_device+0x40d/0x580 [ib_core]
      [20976.266139]  irdma_ib_register_device+0x129/0x250 [irdma]
      [20976.281409]  irdma_probe+0x2c1/0x360 [irdma]
      [20976.285691]  auxiliary_bus_probe+0x45/0x70
      [20976.289790]  really_probe+0x1f2/0x480
      [20976.298509]  driver_probe_device+0x49/0xc0
      [20976.302609]  bus_for_each_drv+0x79/0xc0
      [20976.306448]  __device_attach+0xdc/0x160
      [20976.310286]  bus_probe_device+0x9d/0xb0
      [20976.314128]  device_add+0x43c/0x890
      [20976.321287]  __auxiliary_device_add+0x43/0x60
      [20976.325644]  ice_plug_aux_dev+0xb2/0x100 [ice]
      [20976.330109]  ice_service_task+0xd0c/0xed0 [ice]
      [20976.342591]  process_one_work+0x1a7/0x360
      [20976.350536]  worker_thread+0x30/0x390
      [20976.358128]  kthread+0x10a/0x120
      [20976.365547]  ret_from_fork+0x1f/0x40
      ...
      [20976.438030] task:ip              state:D stack:    0 pid:213658 ppid:213627 flags:0x00004084
      [20976.446469] Call Trace:
      [20976.448921]  __schedule+0x2d1/0x830
      [20976.452414]  schedule+0x35/0xa0
      [20976.455559]  schedule_preempt_disabled+0xa/0x10
      [20976.460090]  __mutex_lock.isra.7+0x310/0x420
      [20976.464364]  device_del+0x36/0x3c0
      [20976.467772]  ice_unplug_aux_dev+0x1a/0x40 [ice]
      [20976.472313]  ice_lag_event_handler+0x2a2/0x520 [ice]
      [20976.477288]  notifier_call_chain+0x47/0x70
      [20976.481386]  __netdev_upper_dev_link+0x18b/0x280
      [20976.489845]  bond_enslave+0xe05/0x1790 [bonding]
      [20976.494475]  do_setlink+0x336/0xf50
      [20976.502517]  __rtnl_newlink+0x529/0x8b0
      [20976.543441]  rtnl_newlink+0x43/0x60
      [20976.546934]  rtnetlink_rcv_msg+0x2b1/0x360
      [20976.559238]  netlink_rcv_skb+0x4c/0x120
      [20976.563079]  netlink_unicast+0x196/0x230
      [20976.567005]  netlink_sendmsg+0x204/0x3d0
      [20976.570930]  sock_sendmsg+0x4c/0x50
      [20976.574423]  ____sys_sendmsg+0x1eb/0x250
      [20976.586807]  ___sys_sendmsg+0x7c/0xc0
      [20976.606353]  __sys_sendmsg+0x57/0xa0
      [20976.609930]  do_syscall_64+0x5b/0x1a0
      [20976.613598]  entry_SYSCALL_64_after_hwframe+0x65/0xca
      
      1. Command 'ip link ... set nomaster' causes that ice_plug_aux_dev()
         is called from ice_service_task() context, aux device is created
         and associated device->lock is taken.
      2. Command 'ip link ... set master...' calls ice's notifier under
         RTNL lock and that notifier calls ice_unplug_aux_dev(). That
         function tries to take aux device->lock but this is already taken
         by ice_plug_aux_dev() in step 1
      3. Later ice_plug_aux_dev() tries to take RTNL lock but this is already
         taken in step 2
      4. Dead-lock
      
      The patch fixes this issue by following changes:
      - Bit ICE_FLAG_PLUG_AUX_DEV is kept to be set during ice_plug_aux_dev()
        call in ice_service_task()
      - The bit is checked in ice_clear_rdma_cap() and only if it is not set
        then ice_unplug_aux_dev() is called. If it is set (in other words
        plugging of aux device was requested and ice_plug_aux_dev() is
        potentially running) then the function only clears the bit
      - Once ice_plug_aux_dev() call (in ice_service_task) is finished
        the bit ICE_FLAG_PLUG_AUX_DEV is cleared but it is also checked
        whether it was already cleared by ice_clear_rdma_cap(). If so then
        aux device is unplugged.
      Signed-off-by: default avatarIvan Vecera <ivecera@redhat.com>
      Co-developed-by: default avatarPetr Oros <poros@redhat.com>
      Signed-off-by: default avatarPetr Oros <poros@redhat.com>
      Reviewed-by: default avatarDave Ertman <david.m.ertman@intel.com>
      Link: https://lore.kernel.org/r/20220310171641.3863659-1-ivecera@redhat.comSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      5cb1ebdb
    • Heiner Kallweit's avatar
      net: phy: meson-gxl: improve link-up behavior · 2c87c6f9
      Heiner Kallweit authored
      Sometimes the link comes up but no data flows. This patch fixes
      this behavior. It's not clear what's the root cause of the issue.
      
      According to the tests one other link-up issue remains.
      In very rare cases the link isn't even reported as up.
      
      Fixes: 84c8f773 ("net: phy: meson-gxl: remove the use of .ack_callback()")
      Tested-by: default avatarErico Nunes <nunes.erico@gmail.com>
      Signed-off-by: default avatarHeiner Kallweit <hkallweit1@gmail.com>
      Link: https://lore.kernel.org/r/e3473452-a1f9-efcf-5fdd-02b6f44c3fcd@gmail.comSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      2c87c6f9
    • Jeremy Linton's avatar
      net: bcmgenet: Don't claim WOL when its not available · 00b022f8
      Jeremy Linton authored
      Some of the bcmgenet platforms don't correctly support WOL, yet
      ethtool returns:
      
      "Supports Wake-on: gsf"
      
      which is false.
      
      Ideally if there isn't a wol_irq, or there is something else that
      keeps the device from being able to wakeup it should display:
      
      "Supports Wake-on: d"
      
      This patch checks whether the device can wakup, before using the
      hard-coded supported flags. This corrects the ethtool reporting, as
      well as the WOL configuration because ethtool verifies that the mode
      is supported before attempting it.
      
      Fixes: c51de7f3 ("net: bcmgenet: add Wake-on-LAN support code")
      Signed-off-by: default avatarJeremy Linton <jeremy.linton@arm.com>
      Tested-by: default avatarPeter Robinson <pbrobinson@gmail.com>
      Acked-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
      Link: https://lore.kernel.org/r/20220310045535.224450-1-jeremy.linton@arm.comSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      00b022f8
    • Jianglei Nie's avatar
      net: arc_emac: Fix use after free in arc_mdio_probe() · bc0e610a
      Jianglei Nie authored
      If bus->state is equal to MDIOBUS_ALLOCATED, mdiobus_free(bus) will free
      the "bus". But bus->name is still used in the next line, which will lead
      to a use after free.
      
      We can fix it by putting the name in a local variable and make the
      bus->name point to the rodata section "name",then use the name in the
      error message without referring to bus to avoid the uaf.
      
      Fixes: 95b5fc03 ("net: arc_emac: Make use of the helper function dev_err_probe()")
      Signed-off-by: default avatarJianglei Nie <niejianglei2021@163.com>
      Link: https://lore.kernel.org/r/20220309121824.36529-1-niejianglei2021@163.comSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      bc0e610a
    • Eric Dumazet's avatar
      sctp: fix kernel-infoleak for SCTP sockets · 633593a8
      Eric Dumazet authored
      syzbot reported a kernel infoleak [1] of 4 bytes.
      
      After analysis, it turned out r->idiag_expires is not initialized
      if inet_sctp_diag_fill() calls inet_diag_msg_common_fill()
      
      Make sure to clear idiag_timer/idiag_retrans/idiag_expires
      and let inet_diag_msg_sctpasoc_fill() fill them again if needed.
      
      [1]
      
      BUG: KMSAN: kernel-infoleak in instrument_copy_to_user include/linux/instrumented.h:121 [inline]
      BUG: KMSAN: kernel-infoleak in copyout lib/iov_iter.c:154 [inline]
      BUG: KMSAN: kernel-infoleak in _copy_to_iter+0x6ef/0x25a0 lib/iov_iter.c:668
       instrument_copy_to_user include/linux/instrumented.h:121 [inline]
       copyout lib/iov_iter.c:154 [inline]
       _copy_to_iter+0x6ef/0x25a0 lib/iov_iter.c:668
       copy_to_iter include/linux/uio.h:162 [inline]
       simple_copy_to_iter+0xf3/0x140 net/core/datagram.c:519
       __skb_datagram_iter+0x2d5/0x11b0 net/core/datagram.c:425
       skb_copy_datagram_iter+0xdc/0x270 net/core/datagram.c:533
       skb_copy_datagram_msg include/linux/skbuff.h:3696 [inline]
       netlink_recvmsg+0x669/0x1c80 net/netlink/af_netlink.c:1977
       sock_recvmsg_nosec net/socket.c:948 [inline]
       sock_recvmsg net/socket.c:966 [inline]
       __sys_recvfrom+0x795/0xa10 net/socket.c:2097
       __do_sys_recvfrom net/socket.c:2115 [inline]
       __se_sys_recvfrom net/socket.c:2111 [inline]
       __x64_sys_recvfrom+0x19d/0x210 net/socket.c:2111
       do_syscall_x64 arch/x86/entry/common.c:51 [inline]
       do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82
       entry_SYSCALL_64_after_hwframe+0x44/0xae
      
      Uninit was created at:
       slab_post_alloc_hook mm/slab.h:737 [inline]
       slab_alloc_node mm/slub.c:3247 [inline]
       __kmalloc_node_track_caller+0xe0c/0x1510 mm/slub.c:4975
       kmalloc_reserve net/core/skbuff.c:354 [inline]
       __alloc_skb+0x545/0xf90 net/core/skbuff.c:426
       alloc_skb include/linux/skbuff.h:1158 [inline]
       netlink_dump+0x3e5/0x16c0 net/netlink/af_netlink.c:2248
       __netlink_dump_start+0xcf8/0xe90 net/netlink/af_netlink.c:2373
       netlink_dump_start include/linux/netlink.h:254 [inline]
       inet_diag_handler_cmd+0x2e7/0x400 net/ipv4/inet_diag.c:1341
       sock_diag_rcv_msg+0x24a/0x620
       netlink_rcv_skb+0x40c/0x7e0 net/netlink/af_netlink.c:2494
       sock_diag_rcv+0x63/0x80 net/core/sock_diag.c:277
       netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline]
       netlink_unicast+0x1093/0x1360 net/netlink/af_netlink.c:1343
       netlink_sendmsg+0x14d9/0x1720 net/netlink/af_netlink.c:1919
       sock_sendmsg_nosec net/socket.c:705 [inline]
       sock_sendmsg net/socket.c:725 [inline]
       sock_write_iter+0x594/0x690 net/socket.c:1061
       do_iter_readv_writev+0xa7f/0xc70
       do_iter_write+0x52c/0x1500 fs/read_write.c:851
       vfs_writev fs/read_write.c:924 [inline]
       do_writev+0x645/0xe00 fs/read_write.c:967
       __do_sys_writev fs/read_write.c:1040 [inline]
       __se_sys_writev fs/read_write.c:1037 [inline]
       __x64_sys_writev+0xe5/0x120 fs/read_write.c:1037
       do_syscall_x64 arch/x86/entry/common.c:51 [inline]
       do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82
       entry_SYSCALL_64_after_hwframe+0x44/0xae
      
      Bytes 68-71 of 2508 are uninitialized
      Memory access of size 2508 starts at ffff888114f9b000
      Data copied to user address 00007f7fe09ff2e0
      
      CPU: 1 PID: 3478 Comm: syz-executor306 Not tainted 5.17.0-rc4-syzkaller #0
      Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
      
      Fixes: 8f840e47 ("sctp: add the sctp_diag.c file")
      Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
      Reported-by: default avatarsyzbot <syzkaller@googlegroups.com>
      Cc: Vlad Yasevich <vyasevich@gmail.com>
      Cc: Neil Horman <nhorman@tuxdriver.com>
      Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
      Reviewed-by: default avatarXin Long <lucien.xin@gmail.com>
      Link: https://lore.kernel.org/r/20220310001145.297371-1-eric.dumazet@gmail.comSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      633593a8
    • Colin Foster's avatar
      net: phy: correct spelling error of media in documentation · 26183cfe
      Colin Foster authored
      The header file incorrectly referenced "median-independant interface"
      instead of media. Correct this typo.
      Signed-off-by: default avatarColin Foster <colin.foster@in-advantage.com>
      Fixes: 4069a572 ("net: phy: Document core PHY structures")
      Reviewed-by: default avatarRussell King (Oracle) <rmk+kernel@armlinux.org.uk>
      Link: https://lore.kernel.org/r/20220309062544.3073-1-colin.foster@in-advantage.comSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      26183cfe
    • Jakub Kicinski's avatar
      Merge tag 'mlx5-updates-2022-03-09' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux · 3e18bcb7
      Jakub Kicinski authored
      Saeed Mahameed says:
      
      ====================
      mlx5-updates-2022-03-09
      
      1) Remove kernel log prints on FW events regarding FW pages management
         and replace that with debugfs entries to track FW pages management commands
         failures and general stats, we do that for all FW commands in general since
         it's the same effort to do so under the already existing debugfs entry for
         FW commands.
      
      2) Add support for ConnectX-7 Software managed steering, in other words STEv2
         which shares a lot in common with STE V1, the difference is in specific
         offsets in the devices, the logic is almost the same, thus we implement
         STEv1 and STEv2 in the same file.
      
      * tag 'mlx5-updates-2022-03-09' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
        net/mlx5: DR, Add support for ConnectX-7 steering
        net/mlx5: DR, Refactor ste_ctx handling for STE v0/1
        net/mlx5: DR, Rename action modify fields to reflect naming in HW spec
        net/mlx5: DR, Fix handling of different actions on the same STE in STEv1
        net/mlx5: DR, Remove unneeded comments
        net/mlx5: DR, Add support for matching on Internet Header Length (IHL)
        net/mlx5: DR, Align mlx5dv_dr API vport action with FW behavior
        net/mlx5: Add debugfs counters for page commands failures
        net/mlx5: Add pages debugfs
        net/mlx5: Move debugfs entries to separate struct
        net/mlx5: Change release_all_pages cap bit location
        net/mlx5: Remove redundant error on reclaim pages
        net/mlx5: Remove redundant error on give pages
        net/mlx5: Remove redundant notify fail on give pages
        net/mlx5: Add command failures data to debugfs
        net/mlx5e: TC, Fix use after free in mlx5e_clone_flow_attr_for_post_act()
      ====================
      
      Link: https://lore.kernel.org/r/20220309213755.610202-1-saeed@kernel.orgSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      3e18bcb7
    • Jakub Kicinski's avatar
      Merge tag 'mlx5-fixes-2022-03-09' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux · 55c4bf4d
      Jakub Kicinski authored
      Saeed Mahameed says:
      
      ====================
      mlx5 fixes 2022-03-09
      
      This series provides bug fixes to mlx5 driver.
      
      * tag 'mlx5-fixes-2022-03-09' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
        net/mlx5e: SHAMPO, reduce TIR indication
        net/mlx5e: Lag, Only handle events from highest priority multipath entry
        net/mlx5: Fix offloading with ESWITCH_IPV4_TTL_MODIFY_ENABLE
        net/mlx5: Fix a race on command flush flow
        net/mlx5: Fix size field in bufferx_reg struct
      ====================
      
      Link: https://lore.kernel.org/r/20220309201517.589132-1-saeed@kernel.orgSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      55c4bf4d
    • Linus Torvalds's avatar
      Merge tag 'block-5.17-2022-03-10' of git://git.kernel.dk/linux-block · 3bcb6451
      Linus Torvalds authored
      Pull block fix from Jens Axboe:
       "Just a single fix for a regression that occured in this merge window"
      
      * tag 'block-5.17-2022-03-10' of git://git.kernel.dk/linux-block:
        block: fix blk_mq_attempt_bio_merge and rq_qos_throttle protection
      3bcb6451
    • Linus Torvalds's avatar
      Merge tag 'staging-5.17-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging · c30b5b8c
      Linus Torvalds authored
      Pull staging driver fixes from Greg KH:
       "Here are three small fixes for staging drivers for 5.17-rc8 or -final,
        which ever comes next.
      
        They resolve some reported problems:
      
         - rtl8723bs wifi driver deadlock fix for reported problem that is a
           revert of a previous patch. Also a documentation fix is added so
           that the same problem hopefully can not come back again.
      
         - gdm724x driver use-after-free fix for a reported problem.
      
        All of these have been in linux-next for a while with no reported
        problems"
      
      * tag 'staging-5.17-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
        staging: rtl8723bs: Improve the comment explaining the locking rules
        staging: rtl8723bs: Fix access-point mode deadlock
        staging: gdm724x: fix use after free in gdm_lte_rx()
      c30b5b8c
    • Jakub Kicinski's avatar
      Merge branch 'mptcp-selftests-refactor-join-tests' · 2a9eef86
      Jakub Kicinski authored
      Mat Martineau says:
      
      ====================
      mptcp: selftests: Refactor join tests
      
      The mptcp_join.sh selftest is the largest and most complex self test for
      MPTCP, and it is frequently used by MPTCP developers to reproduce bugs
      and verify fixes. As it grew in size and execution time, it became more
      cumbersome to use.
      
      These changes do some much-needed cleanup, and add developer-friendly
      features to make it easier to see failures and run a subset of the tests
      when verifying fixes.
      ====================
      
      Link: https://lore.kernel.org/r/20220309191636.258232-1-mathew.j.martineau@linux.intel.comSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      2a9eef86
    • Matthieu Baerts's avatar
      selftests: mptcp: join: make it shellcheck compliant · d8d08302
      Matthieu Baerts authored
      This fixes a few issues reported by ShellCheck:
      
      - SC2068: Double quote array expansions to avoid re-splitting elements.
      - SC2206: Quote to prevent word splitting/globbing, or split robustly
                with mapfile or read -a.
      - SC2166: Prefer [ p ] && [ q ] as [ p -a q ] is not well defined.
      - SC2155: Declare and assign separately to avoid masking return values.
      - SC2162: read without -r will mangle backslashes.
      - SC2219: Instead of 'let expr', prefer (( expr )) .
      - SC2181: Check exit code directly with e.g. 'if mycmd;', not indirectly
                with $?.
      - SC2236: Use -n instead of ! -z.
      - SC2004: $/${} is unnecessary on arithmetic variables.
      - SC2012: Use find instead of ls to better handle non-alphanumeric
                filenames.
      - SC2002: Useless cat. Consider 'cmd < file | ..' or 'cmd file | ..'
                instead.
      
      SC2086 (Double quotes to prevent globbing and word splitting) is ignored
      because it is controlled for the moment and there are too many to
      change.
      
      While at it, also fixed the alignment in one comment.
      Signed-off-by: default avatarMatthieu Baerts <matthieu.baerts@tessares.net>
      Signed-off-by: default avatarMat Martineau <mathew.j.martineau@linux.intel.com>
      Signed-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      d8d08302
    • Matthieu Baerts's avatar
      selftests: mptcp: join: avoid backquotes · 4bfadd71
      Matthieu Baerts authored
      As explained on ShellCheck's wiki [1], it is recommended to avoid
      backquotes `...` in favour of parenthesis $(...):
      
      > Backtick command substitution `...` is legacy syntax with several
      > issues.
      >
      > - It has a series of undefined behaviors related to quoting in POSIX.
      > - It imposes a custom escaping mode with surprising results.
      > - It's exceptionally hard to nest.
      >
      > $(...) command substitution has none of these problems, and is
      > therefore strongly encouraged.
      
      [1] https://www.shellcheck.net/wiki/SC2006Signed-off-by: default avatarMatthieu Baerts <matthieu.baerts@tessares.net>
      Signed-off-by: default avatarMat Martineau <mathew.j.martineau@linux.intel.com>
      Signed-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      4bfadd71
    • Matthieu Baerts's avatar
      selftests: mptcp: join: clarify local/global vars · 1e777bd8
      Matthieu Baerts authored
      Some vars are redefined in different places. Best to avoid this
      classical Bash pitfall where variables are accidentally overridden by
      other functions because the proper scope has not been defined.
      
      Most issues are with loops: typically 'i' is used in for-loops but if it
      is not global, calling a function from a for-loop also doing a for-loop
      with the same non local 'i' variable causes troubles because the first
      'i' will be assigned to another value. To prevent such issues, the
      iterator variable is now declared as local just before the loop. If it
      is always done like this, issues are avoided.
      
      To distinct between local and non local variables, all non local ones
      are defined at the beginning of the script. The others are now defined
      with the "local" keyword.
      Signed-off-by: default avatarMatthieu Baerts <matthieu.baerts@tessares.net>
      Signed-off-by: default avatarMat Martineau <mathew.j.martineau@linux.intel.com>
      Signed-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      1e777bd8
    • Matthieu Baerts's avatar
      selftests: mptcp: join: helper to filter TCP · 3469d72f
      Matthieu Baerts authored
      This is more readable and reduces duplicated commands.
      
      This might also be useful to add v6 support and switch to nftables.
      Signed-off-by: default avatarMatthieu Baerts <matthieu.baerts@tessares.net>
      Signed-off-by: default avatarMat Martineau <mathew.j.martineau@linux.intel.com>
      Signed-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      3469d72f
    • Matthieu Baerts's avatar
      selftests: mptcp: join: list failure at the end · 39aab882
      Matthieu Baerts authored
      With ~100 tests, it helps to have this summary at the end not to scroll
      to find which one has failed.
      
      It is especially interseting when looking at the output produced by the
      CI where the kernel logs from the serial are mixed together.
      Signed-off-by: default avatarMatthieu Baerts <matthieu.baerts@tessares.net>
      Signed-off-by: default avatarMat Martineau <mathew.j.martineau@linux.intel.com>
      Signed-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      39aab882
    • Matthieu Baerts's avatar
      selftests: mptcp: join: alt. to exec specific tests · c7d49c03
      Matthieu Baerts authored
      Running a specific test by giving the ID is often what we want: the CI
      reports an issue with the Nth test, it is reproducible with:
      
        ./mptcp_join.sh N
      
      But this might not work when there is a need to find which commit has
      introduced a regression making a test unstable: failing from time to
      time. Indeed, a specific test is not attached to one ID: the ID is in
      fact a counter. It means the same test can have a different ID if other
      tests have been added/removed before this unstable one.
      
      Remembering the current test can also help listing failed tests at the
      end.
      Signed-off-by: default avatarMatthieu Baerts <matthieu.baerts@tessares.net>
      Signed-off-by: default avatarMat Martineau <mathew.j.martineau@linux.intel.com>
      Signed-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      c7d49c03
    • Matthieu Baerts's avatar
      selftests: mptcp: join: option to execute specific tests · ae7bd9cc
      Matthieu Baerts authored
      Often, it is needed to run one specific test.
      
      There are options to run subgroups of tests but when only one fails, no
      need to run all the subgroup. So far, the solution was to edit the
      script to comment the tests that are not needed but that's not ideal.
      
      Now, it is possible to run one specific test by giving the ID of the
      tests that are going to be validated, e.g.
      
        ./mptcp_join.sh 36 37
      
      This is cleaner and saves time.
      
      Technically, the reset* functions now return 0 if the test can be
      executed. This naturally creates sections per test in the code which is
      also helpful to understand what a test is exactly doing.
      Suggested-by: default avatarPaolo Abeni <pabeni@redhat.com>
      Signed-off-by: default avatarMatthieu Baerts <matthieu.baerts@tessares.net>
      Signed-off-by: default avatarMat Martineau <mathew.j.martineau@linux.intel.com>
      Signed-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      ae7bd9cc
    • Matthieu Baerts's avatar
      selftests: mptcp: join: reset failing links · e59300ce
      Matthieu Baerts authored
      Best to always reset this env var before each test to avoid surprising
      behaviour depending on the order tests are running.
      
      Also clearly set it for the last failing links test is also needed when
      only this test is executed.
      Signed-off-by: default avatarMatthieu Baerts <matthieu.baerts@tessares.net>
      Signed-off-by: default avatarMat Martineau <mathew.j.martineau@linux.intel.com>
      Signed-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      e59300ce
    • Matthieu Baerts's avatar
      selftests: mptcp: join: define tests groups once · 3afd0280
      Matthieu Baerts authored
      When adding a new tests group, it has to be defined in multiple places:
      
      - in the all_tests() function
      - in the 'usage()' function
      - in the getopts: short option + what to do when the option is used
      
      Because it is easy to forget one of them, it is useful to have to define
      them only once.
      
      Note: only using an associative array would simplify the code but the
      entries are stored in a hashtable and iterating over the different items
      doesn't give the same order as the one used in the declaration of this
      array. Because we want to run these tests in the same order as before, a
      "simple" array is used first.
      Signed-off-by: default avatarMatthieu Baerts <matthieu.baerts@tessares.net>
      Signed-off-by: default avatarMat Martineau <mathew.j.martineau@linux.intel.com>
      Signed-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      3afd0280
    • Geliang Tang's avatar
      selftests: mptcp: drop msg argument of chk_csum_nr · 3c082695
      Geliang Tang authored
      This patch dropped the msg argument of chk_csum_nr, to unify chk_csum_nr
      with other chk_*_nr functions.
      Reviewed-by: default avatarMatthieu Baerts <matthieu.baerts@tessares.net>
      Signed-off-by: default avatarGeliang Tang <geliang.tang@suse.com>
      Signed-off-by: default avatarMat Martineau <mathew.j.martineau@linux.intel.com>
      Signed-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      3c082695
    • Clément Léger's avatar
      net: phy: DP83822: clear MISR2 register to disable interrupts · 37c9d66c
      Clément Léger authored
      MISR1 was cleared twice but the original author intention was probably
      to clear MISR1 & MISR2 to completely disable interrupts. Fix it to
      clear MISR2.
      
      Fixes: 87461f7a ("net: phy: DP83822 initial driver submission")
      Signed-off-by: default avatarClément Léger <clement.leger@bootlin.com>
      Reviewed-by: default avatarAndrew Lunn <andrew@lunn.ch>
      Reviewed-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
      Link: https://lore.kernel.org/r/20220309142228.761153-1-clement.leger@bootlin.comSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      37c9d66c