1. 20 May, 2019 2 commits
  2. 14 May, 2019 7 commits
  3. 29 Apr, 2019 31 commits
    • Bart Van Assche's avatar
      scsi: qla2xxx: Avoid that lockdep complains about unsafe locking in tcm_qla2xxx_close_session() · d4023db7
      Bart Van Assche authored
      This patch avoids that lockdep reports the following warning:
      
      =====================================================
      WARNING: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected
      5.1.0-rc1-dbg+ #11 Tainted: G        W
      -----------------------------------------------------
      rmdir/1478 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire:
      00000000e7ac4607 (&(&k->k_lock)->rlock){+.+.}, at: klist_next+0x43/0x1d0
      
      and this task is already holding:
      00000000cf0baf5e (&(&ha->tgt.sess_lock)->rlock){-...}, at: tcm_qla2xxx_close_session+0x57/0xb0 [tcm_qla2xxx]
      which would create a new lock dependency:
       (&(&ha->tgt.sess_lock)->rlock){-...} -> (&(&k->k_lock)->rlock){+.+.}
      
      but this new dependency connects a HARDIRQ-irq-safe lock:
       (&(&ha->tgt.sess_lock)->rlock){-...}
      
      ... which became HARDIRQ-irq-safe at:
        lock_acquire+0xe3/0x200
        _raw_spin_lock_irqsave+0x3d/0x60
        qla2x00_fcport_event_handler+0x1f3d/0x22b0 [qla2xxx]
        qla2x00_async_login_sp_done+0x1dc/0x1f0 [qla2xxx]
        qla24xx_process_response_queue+0xa37/0x10e0 [qla2xxx]
        qla24xx_msix_rsp_q+0x79/0xf0 [qla2xxx]
        __handle_irq_event_percpu+0x79/0x3c0
        handle_irq_event_percpu+0x70/0xf0
        handle_irq_event+0x5a/0x8b
        handle_edge_irq+0x12c/0x310
        handle_irq+0x192/0x20a
        do_IRQ+0x73/0x160
        ret_from_intr+0x0/0x1d
        default_idle+0x23/0x1f0
        arch_cpu_idle+0x15/0x20
        default_idle_call+0x35/0x40
        do_idle+0x2bb/0x2e0
        cpu_startup_entry+0x1d/0x20
        start_secondary+0x24d/0x2d0
        secondary_startup_64+0xa4/0xb0
      
      to a HARDIRQ-irq-unsafe lock:
       (&(&k->k_lock)->rlock){+.+.}
      
      ... which became HARDIRQ-irq-unsafe at:
      ...
        lock_acquire+0xe3/0x200
        _raw_spin_lock+0x32/0x50
        klist_add_tail+0x33/0xb0
        device_add+0x7f4/0xb60
        device_create_groups_vargs+0x11c/0x150
        device_create_with_groups+0x89/0xb0
        vtconsole_class_init+0xb2/0x124
        do_one_initcall+0xc5/0x3ce
        kernel_init_freeable+0x295/0x32e
        kernel_init+0x11/0x11b
        ret_from_fork+0x3a/0x50
      
      other info that might help us debug this:
      
       Possible interrupt unsafe locking scenario:
      
             CPU0                    CPU1
             ----                    ----
        lock(&(&k->k_lock)->rlock);
                                     local_irq_disable();
                                     lock(&(&ha->tgt.sess_lock)->rlock);
                                     lock(&(&k->k_lock)->rlock);
        <Interrupt>
          lock(&(&ha->tgt.sess_lock)->rlock);
      
       *** DEADLOCK ***
      
      4 locks held by rmdir/1478:
       #0: 000000002c7f1ba4 (sb_writers#10){.+.+}, at: mnt_want_write+0x32/0x70
       #1: 00000000c85eb147 (&default_group_class[depth - 1]#2/1){+.+.}, at: do_rmdir+0x217/0x2d0
       #2: 000000002b164d6f (&sb->s_type->i_mutex_key#13){++++}, at: vfs_rmdir+0x7e/0x1d0
       #3: 00000000cf0baf5e (&(&ha->tgt.sess_lock)->rlock){-...}, at: tcm_qla2xxx_close_session+0x57/0xb0 [tcm_qla2xxx]
      
      the dependencies between HARDIRQ-irq-safe lock and the holding lock:
      -> (&(&ha->tgt.sess_lock)->rlock){-...} ops: 127 {
         IN-HARDIRQ-W at:
                          lock_acquire+0xe3/0x200
                          _raw_spin_lock_irqsave+0x3d/0x60
                          qla2x00_fcport_event_handler+0x1f3d/0x22b0 [qla2xxx]
                          qla2x00_async_login_sp_done+0x1dc/0x1f0 [qla2xxx]
                          qla24xx_process_response_queue+0xa37/0x10e0 [qla2xxx]
                          qla24xx_msix_rsp_q+0x79/0xf0 [qla2xxx]
                          __handle_irq_event_percpu+0x79/0x3c0
                          handle_irq_event_percpu+0x70/0xf0
                          handle_irq_event+0x5a/0x8b
                          handle_edge_irq+0x12c/0x310
                          handle_irq+0x192/0x20a
                          do_IRQ+0x73/0x160
                          ret_from_intr+0x0/0x1d
                          default_idle+0x23/0x1f0
                          arch_cpu_idle+0x15/0x20
                          default_idle_call+0x35/0x40
                          do_idle+0x2bb/0x2e0
                          cpu_startup_entry+0x1d/0x20
                          start_secondary+0x24d/0x2d0
                          secondary_startup_64+0xa4/0xb0
         INITIAL USE at:
                         lock_acquire+0xe3/0x200
                         _raw_spin_lock_irqsave+0x3d/0x60
                         qla2x00_loop_resync+0xb3d/0x2690 [qla2xxx]
                         qla2x00_do_dpc+0xcee/0xf30 [qla2xxx]
                         kthread+0x1d2/0x1f0
                         ret_from_fork+0x3a/0x50
       }
       ... key      at: [<ffffffffa125f700>] __key.62804+0x0/0xfffffffffff7e900 [qla2xxx]
       ... acquired at:
         __lock_acquire+0x11ed/0x1b60
         lock_acquire+0xe3/0x200
         _raw_spin_lock_irqsave+0x3d/0x60
         klist_next+0x43/0x1d0
         device_for_each_child+0x96/0x110
         scsi_target_block+0x3c/0x40 [scsi_mod]
         fc_remote_port_delete+0xe7/0x1c0 [scsi_transport_fc]
         qla2x00_mark_device_lost+0x4d3/0x500 [qla2xxx]
         qlt_unreg_sess+0x104/0x2c0 [qla2xxx]
         tcm_qla2xxx_close_session+0xa2/0xb0 [tcm_qla2xxx]
         target_shutdown_sessions+0x17b/0x190 [target_core_mod]
         core_tpg_del_initiator_node_acl+0xf3/0x1f0 [target_core_mod]
         target_fabric_nacl_base_release+0x25/0x30 [target_core_mod]
         config_item_release+0x9f/0x120 [configfs]
         config_item_put+0x29/0x2b [configfs]
         configfs_rmdir+0x3d2/0x520 [configfs]
         vfs_rmdir+0xb3/0x1d0
         do_rmdir+0x25c/0x2d0
         __x64_sys_rmdir+0x24/0x30
         do_syscall_64+0x77/0x220
         entry_SYSCALL_64_after_hwframe+0x49/0xbe
      
      the dependencies between the lock to be acquired
       and HARDIRQ-irq-unsafe lock:
      -> (&(&k->k_lock)->rlock){+.+.} ops: 14568 {
         HARDIRQ-ON-W at:
                          lock_acquire+0xe3/0x200
                          _raw_spin_lock+0x32/0x50
                          klist_add_tail+0x33/0xb0
                          device_add+0x7f4/0xb60
                          device_create_groups_vargs+0x11c/0x150
                          device_create_with_groups+0x89/0xb0
                          vtconsole_class_init+0xb2/0x124
                          do_one_initcall+0xc5/0x3ce
                          kernel_init_freeable+0x295/0x32e
                          kernel_init+0x11/0x11b
                          ret_from_fork+0x3a/0x50
         SOFTIRQ-ON-W at:
                          lock_acquire+0xe3/0x200
                          _raw_spin_lock+0x32/0x50
                          klist_add_tail+0x33/0xb0
                          device_add+0x7f4/0xb60
                          device_create_groups_vargs+0x11c/0x150
                          device_create_with_groups+0x89/0xb0
                          vtconsole_class_init+0xb2/0x124
                          do_one_initcall+0xc5/0x3ce
                          kernel_init_freeable+0x295/0x32e
                          kernel_init+0x11/0x11b
                          ret_from_fork+0x3a/0x50
         INITIAL USE at:
                         lock_acquire+0xe3/0x200
                         _raw_spin_lock+0x32/0x50
                         klist_add_tail+0x33/0xb0
                         device_add+0x7f4/0xb60
                         device_create_groups_vargs+0x11c/0x150
                         device_create_with_groups+0x89/0xb0
                         vtconsole_class_init+0xb2/0x124
                         do_one_initcall+0xc5/0x3ce
                         kernel_init_freeable+0x295/0x32e
                         kernel_init+0x11/0x11b
                         ret_from_fork+0x3a/0x50
       }
       ... key      at: [<ffffffff83f3d900>] __key.15805+0x0/0x40
       ... acquired at:
         __lock_acquire+0x11ed/0x1b60
         lock_acquire+0xe3/0x200
         _raw_spin_lock_irqsave+0x3d/0x60
         klist_next+0x43/0x1d0
         device_for_each_child+0x96/0x110
         scsi_target_block+0x3c/0x40 [scsi_mod]
         fc_remote_port_delete+0xe7/0x1c0 [scsi_transport_fc]
         qla2x00_mark_device_lost+0x4d3/0x500 [qla2xxx]
         qlt_unreg_sess+0x104/0x2c0 [qla2xxx]
         tcm_qla2xxx_close_session+0xa2/0xb0 [tcm_qla2xxx]
         target_shutdown_sessions+0x17b/0x190 [target_core_mod]
         core_tpg_del_initiator_node_acl+0xf3/0x1f0 [target_core_mod]
         target_fabric_nacl_base_release+0x25/0x30 [target_core_mod]
         config_item_release+0x9f/0x120 [configfs]
         config_item_put+0x29/0x2b [configfs]
         configfs_rmdir+0x3d2/0x520 [configfs]
         vfs_rmdir+0xb3/0x1d0
         do_rmdir+0x25c/0x2d0
         __x64_sys_rmdir+0x24/0x30
         do_syscall_64+0x77/0x220
         entry_SYSCALL_64_after_hwframe+0x49/0xbe
      
      stack backtrace:
      CPU: 7 PID: 1478 Comm: rmdir Tainted: G        W         5.1.0-rc1-dbg+ #11
      Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
      Call Trace:
       dump_stack+0x86/0xca
       check_usage.cold.59+0x473/0x563
       check_prev_add.constprop.43+0x1f1/0x1170
       __lock_acquire+0x11ed/0x1b60
       lock_acquire+0xe3/0x200
       _raw_spin_lock_irqsave+0x3d/0x60
       klist_next+0x43/0x1d0
       device_for_each_child+0x96/0x110
       scsi_target_block+0x3c/0x40 [scsi_mod]
       fc_remote_port_delete+0xe7/0x1c0 [scsi_transport_fc]
       qla2x00_mark_device_lost+0x4d3/0x500 [qla2xxx]
       qlt_unreg_sess+0x104/0x2c0 [qla2xxx]
       tcm_qla2xxx_close_session+0xa2/0xb0 [tcm_qla2xxx]
       target_shutdown_sessions+0x17b/0x190 [target_core_mod]
       core_tpg_del_initiator_node_acl+0xf3/0x1f0 [target_core_mod]
       target_fabric_nacl_base_release+0x25/0x30 [target_core_mod]
       config_item_release+0x9f/0x120 [configfs]
       config_item_put+0x29/0x2b [configfs]
       configfs_rmdir+0x3d2/0x520 [configfs]
       vfs_rmdir+0xb3/0x1d0
       do_rmdir+0x25c/0x2d0
       __x64_sys_rmdir+0x24/0x30
       do_syscall_64+0x77/0x220
       entry_SYSCALL_64_after_hwframe+0x49/0xbe
      
      Cc: Himanshu Madhani <hmadhani@marvell.com>
      Cc: Giridhar Malavali <gmalavali@marvell.com>
      Signed-off-by: default avatarBart Van Assche <bvanassche@acm.org>
      Acked-by: default avatarHimanshu Madhani <hmadhani@marvell.com>
      Signed-off-by: default avatarMartin K. Petersen <martin.petersen@oracle.com>
      d4023db7
    • Bart Van Assche's avatar
      scsi: qla2xxx: Avoid that qlt_send_resp_ctio() corrupts memory · a861b492
      Bart Van Assche authored
      The "(&ctio->u.status1.sense_data)[i]" where i >= 0 expressions in
      qlt_send_resp_ctio() are probably typos and should have been
      "(&ctio->u.status1.sense_data[4 * i])" instead. Instead of only fixing
      these typos, modify the code for storing sense data such that it becomes
      easy to read. This patch fixes a Coverity complaint about accessing an
      array outside its bounds.
      
      Cc: Himanshu Madhani <hmadhani@marvell.com>
      Cc: Giridhar Malavali <gmalavali@marvell.com>
      Fixes: be25152c ("qla2xxx: Improve T10-DIF/PI handling in driver.") # v4.11.
      Signed-off-by: default avatarBart Van Assche <bvanassche@acm.org>
      Acked-by: default avatarHimanshu Madhani <hmadhani@marvell.com>
      Signed-off-by: default avatarMartin K. Petersen <martin.petersen@oracle.com>
      a861b492
    • Bart Van Assche's avatar
      scsi: qla2xxx: Fix hardirq-unsafe locking · 300ec741
      Bart Van Assche authored
      Since fc_remote_port_delete() must be called with interrupts enabled, do
      not disable interrupts when calling that function. Remove the lockin calls
      from around the put_sess() call. This is safe because the function that is
      called when the final reference is dropped, qlt_unreg_sess(), grabs the
      proper locks. This patch avoids that lockdep reports the following:
      
      WARNING: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected
      kworker/2:1/62 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire:
      0000000009e679b3 (&(&k->k_lock)->rlock){+.+.}, at: klist_next+0x43/0x1d0
      
      and this task is already holding:
      00000000a033b71c (&(&ha->tgt.sess_lock)->rlock){-...}, at: qla24xx_delete_sess_fn+0x55/0xf0 [qla2xxx_scst]
      which would create a new lock dependency:
       (&(&ha->tgt.sess_lock)->rlock){-...} -> (&(&k->k_lock)->rlock){+.+.}
      
      but this new dependency connects a HARDIRQ-irq-safe lock:
       (&(&ha->tgt.sess_lock)->rlock){-...}
      
      ... which became HARDIRQ-irq-safe at:
        lock_acquire+0xe3/0x200
        _raw_spin_lock_irqsave+0x3d/0x60
        qla24xx_report_id_acquisition+0xa69/0xe30 [qla2xxx_scst]
        qla24xx_process_response_queue+0x69e/0x1270 [qla2xxx_scst]
        qla24xx_msix_rsp_q+0x79/0xf0 [qla2xxx_scst]
        __handle_irq_event_percpu+0x79/0x3c0
        handle_irq_event_percpu+0x70/0xf0
        handle_irq_event+0x5a/0x8b
        handle_edge_irq+0x12c/0x310
        handle_irq+0x192/0x20a
        do_IRQ+0x73/0x160
        ret_from_intr+0x0/0x1d
        default_idle+0x23/0x1f0
        arch_cpu_idle+0x15/0x20
        default_idle_call+0x35/0x40
        do_idle+0x2bb/0x2e0
        cpu_startup_entry+0x1d/0x20
        start_secondary+0x2a8/0x320
        secondary_startup_64+0xa4/0xb0
      
      to a HARDIRQ-irq-unsafe lock:
       (&(&k->k_lock)->rlock){+.+.}
      
      ... which became HARDIRQ-irq-unsafe at:
      ...
        lock_acquire+0xe3/0x200
        _raw_spin_lock+0x32/0x50
        klist_add_tail+0x33/0xb0
        device_add+0x7e1/0xb50
        device_create_groups_vargs+0x11c/0x150
        device_create_with_groups+0x89/0xb0
        vtconsole_class_init+0xb2/0x124
        do_one_initcall+0xc5/0x3ce
        kernel_init_freeable+0x295/0x32e
        kernel_init+0x11/0x11b
        ret_from_fork+0x3a/0x50
      
      other info that might help us debug this:
      
       Possible interrupt unsafe locking scenario:
      
             CPU0                    CPU1
             ----                    ----
        lock(&(&k->k_lock)->rlock);
                                     local_irq_disable();
                                     lock(&(&ha->tgt.sess_lock)->rlock);
                                     lock(&(&k->k_lock)->rlock);
        <Interrupt>
          lock(&(&ha->tgt.sess_lock)->rlock);
      
       *** DEADLOCK ***
      
      3 locks held by kworker/2:1/62:
       #0: 00000000a4319c16 ((wq_completion)"qla2xxx_wq"){+.+.}, at: process_one_work+0x437/0xa80
       #1: 00000000ffa34c42 ((work_completion)(&sess->del_work)){+.+.}, at: process_one_work+0x437/0xa80
       #2: 00000000a033b71c (&(&ha->tgt.sess_lock)->rlock){-...}, at: qla24xx_delete_sess_fn+0x55/0xf0 [qla2xxx_scst]
      
      the dependencies between HARDIRQ-irq-safe lock and the holding lock:
      -> (&(&ha->tgt.sess_lock)->rlock){-...} ops: 8 {
         IN-HARDIRQ-W at:
                          lock_acquire+0xe3/0x200
                          _raw_spin_lock_irqsave+0x3d/0x60
                          qla24xx_report_id_acquisition+0xa69/0xe30 [qla2xxx_scst]
                          qla24xx_process_response_queue+0x69e/0x1270 [qla2xxx_scst]
                          qla24xx_msix_rsp_q+0x79/0xf0 [qla2xxx_scst]
                          __handle_irq_event_percpu+0x79/0x3c0
                          handle_irq_event_percpu+0x70/0xf0
                          handle_irq_event+0x5a/0x8b
                          handle_edge_irq+0x12c/0x310
                          handle_irq+0x192/0x20a
                          do_IRQ+0x73/0x160
                          ret_from_intr+0x0/0x1d
                          default_idle+0x23/0x1f0
                          arch_cpu_idle+0x15/0x20
                          default_idle_call+0x35/0x40
                          do_idle+0x2bb/0x2e0
                          cpu_startup_entry+0x1d/0x20
                          start_secondary+0x2a8/0x320
                          secondary_startup_64+0xa4/0xb0
         INITIAL USE at:
                         lock_acquire+0xe3/0x200
                         _raw_spin_lock_irqsave+0x3d/0x60
                         qla24xx_report_id_acquisition+0xa69/0xe30 [qla2xxx_scst]
                         qla24xx_process_response_queue+0x69e/0x1270 [qla2xxx_scst]
                         qla24xx_msix_rsp_q+0x79/0xf0 [qla2xxx_scst]
                         __handle_irq_event_percpu+0x79/0x3c0
                         handle_irq_event_percpu+0x70/0xf0
                         handle_irq_event+0x5a/0x8b
                         handle_edge_irq+0x12c/0x310
                         handle_irq+0x192/0x20a
                         do_IRQ+0x73/0x160
                         ret_from_intr+0x0/0x1d
                         default_idle+0x23/0x1f0
                         arch_cpu_idle+0x15/0x20
                         default_idle_call+0x35/0x40
                         do_idle+0x2bb/0x2e0
                         cpu_startup_entry+0x1d/0x20
                         start_secondary+0x2a8/0x320
                         secondary_startup_64+0xa4/0xb0
       }
       ... key      at: [<ffffffffa0c0d080>] __key.85462+0x0/0xfffffffffff7df80 [qla2xxx_scst]
       ... acquired at:
         lock_acquire+0xe3/0x200
         _raw_spin_lock_irqsave+0x3d/0x60
         klist_next+0x43/0x1d0
         device_for_each_child+0x96/0x110
         scsi_target_block+0x3c/0x40 [scsi_mod]
         fc_remote_port_delete+0xe7/0x1c0 [scsi_transport_fc]
         qla2x00_mark_device_lost+0xa0b/0xa30 [qla2xxx_scst]
         qlt_unreg_sess+0x1c6/0x380 [qla2xxx_scst]
         qla24xx_delete_sess_fn+0xe6/0xf0 [qla2xxx_scst]
         process_one_work+0x511/0xa80
         worker_thread+0x67/0x5b0
         kthread+0x1d2/0x1f0
         ret_from_fork+0x3a/0x50
      
      the dependencies between the lock to be acquired
       and HARDIRQ-irq-unsafe lock:
      -> (&(&k->k_lock)->rlock){+.+.} ops: 13831 {
         HARDIRQ-ON-W at:
                          lock_acquire+0xe3/0x200
                          _raw_spin_lock+0x32/0x50
                          klist_add_tail+0x33/0xb0
                          device_add+0x7e1/0xb50
                          device_create_groups_vargs+0x11c/0x150
                          device_create_with_groups+0x89/0xb0
                          vtconsole_class_init+0xb2/0x124
                          do_one_initcall+0xc5/0x3ce
                          kernel_init_freeable+0x295/0x32e
                          kernel_init+0x11/0x11b
                          ret_from_fork+0x3a/0x50
         SOFTIRQ-ON-W at:
                          lock_acquire+0xe3/0x200
                          _raw_spin_lock+0x32/0x50
                          klist_add_tail+0x33/0xb0
                          device_add+0x7e1/0xb50
                          device_create_groups_vargs+0x11c/0x150
                          device_create_with_groups+0x89/0xb0
                          vtconsole_class_init+0xb2/0x124
                          do_one_initcall+0xc5/0x3ce
                          kernel_init_freeable+0x295/0x32e
                          kernel_init+0x11/0x11b
                          ret_from_fork+0x3a/0x50
         INITIAL USE at:
                         lock_acquire+0xe3/0x200
                         _raw_spin_lock+0x32/0x50
                         klist_add_tail+0x33/0xb0
                         device_add+0x7e1/0xb50
                         device_create_groups_vargs+0x11c/0x150
                         device_create_with_groups+0x89/0xb0
                         vtconsole_class_init+0xb2/0x124
                         do_one_initcall+0xc5/0x3ce
                         kernel_init_freeable+0x295/0x32e
                         kernel_init+0x11/0x11b
                         ret_from_fork+0x3a/0x50
       }
       ... key      at: [<ffffffff83ed8780>] __key.15491+0x0/0x40
       ... acquired at:
         lock_acquire+0xe3/0x200
         _raw_spin_lock_irqsave+0x3d/0x60
         klist_next+0x43/0x1d0
         device_for_each_child+0x96/0x110
         scsi_target_block+0x3c/0x40 [scsi_mod]
         fc_remote_port_delete+0xe7/0x1c0 [scsi_transport_fc]
         qla2x00_mark_device_lost+0xa0b/0xa30 [qla2xxx_scst]
         qlt_unreg_sess+0x1c6/0x380 [qla2xxx_scst]
         qla24xx_delete_sess_fn+0xe6/0xf0 [qla2xxx_scst]
         process_one_work+0x511/0xa80
         worker_thread+0x67/0x5b0
         kthread+0x1d2/0x1f0
         ret_from_fork+0x3a/0x50
      
      stack backtrace:
      CPU: 2 PID: 62 Comm: kworker/2:1 Tainted: G           O      5.0.7-dbg+ #8
      Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
      Workqueue: qla2xxx_wq qla24xx_delete_sess_fn [qla2xxx_scst]
      Call Trace:
       dump_stack+0x86/0xca
       check_usage.cold.52+0x473/0x563
       __lock_acquire+0x11c0/0x23e0
       lock_acquire+0xe3/0x200
       _raw_spin_lock_irqsave+0x3d/0x60
       klist_next+0x43/0x1d0
       device_for_each_child+0x96/0x110
       scsi_target_block+0x3c/0x40 [scsi_mod]
       fc_remote_port_delete+0xe7/0x1c0 [scsi_transport_fc]
       qla2x00_mark_device_lost+0xa0b/0xa30 [qla2xxx_scst]
       qlt_unreg_sess+0x1c6/0x380 [qla2xxx_scst]
       qla24xx_delete_sess_fn+0xe6/0xf0 [qla2xxx_scst]
       process_one_work+0x511/0xa80
       worker_thread+0x67/0x5b0
       kthread+0x1d2/0x1f0
       ret_from_fork+0x3a/0x50
      
      Cc: Himanshu Madhani <hmadhani@marvell.com>
      Cc: Giridhar Malavali <gmalavali@marvell.com>
      Signed-off-by: default avatarBart Van Assche <bvanassche@acm.org>
      Acked-by: default avatarHimanshu Madhani <hmadhani@marvell.com>
      Signed-off-by: default avatarMartin K. Petersen <martin.petersen@oracle.com>
      300ec741
    • Bart Van Assche's avatar
      scsi: qla2xxx: Complain loudly about reference count underflow · db4bf822
      Bart Van Assche authored
      A reference count underflow is a severe bug. Hence complain loudly if a
      reference count underflow happens.
      
      Cc: Himanshu Madhani <hmadhani@marvell.com>
      Cc: Giridhar Malavali <gmalavali@marvell.com>
      Signed-off-by: default avatarBart Van Assche <bvanassche@acm.org>
      Acked-by: default avatarHimanshu Madhani <hmadhani@marvell.com>
      Signed-off-by: default avatarMartin K. Petersen <martin.petersen@oracle.com>
      db4bf822
    • Bart Van Assche's avatar
      scsi: qla2xxx: Use __le64 instead of uint32_t[2] for sending DMA addresses to firmware · d4556a49
      Bart Van Assche authored
      This patch makes the code easier to read and more compact.
      
      Cc: Himanshu Madhani <hmadhani@marvell.com>
      Cc: Giridhar Malavali <gmalavali@marvell.com>
      Signed-off-by: default avatarBart Van Assche <bvanassche@acm.org>
      Acked-by: default avatarHimanshu Madhani <hmadhani@marvell.com>
      Signed-off-by: default avatarMartin K. Petersen <martin.petersen@oracle.com>
      d4556a49
    • Bart Van Assche's avatar
      scsi: qla2xxx: Introduce the dsd32 and dsd64 data structures · 15b7a68c
      Bart Van Assche authored
      Introduce two structures for the (DMA address, length) combination instead
      of using separate structure members for the DMA address and length. This
      patch fixes several Coverity complaints about 'cur_dsd' being used to write
      outside the bounds of structure members.
      
      Cc: Himanshu Madhani <hmadhani@marvell.com>
      Cc: Giridhar Malavali <gmalavali@marvell.com>
      Signed-off-by: default avatarBart Van Assche <bvanassche@acm.org>
      Acked-by: default avatarHimanshu Madhani <hmadhani@marvell.com>
      Signed-off-by: default avatarMartin K. Petersen <martin.petersen@oracle.com>
      15b7a68c
    • Bart Van Assche's avatar
      scsi: qla2xxx: Check the size of firmware data structures at compile time · bc04459c
      Bart Van Assche authored
      Since the next patch will modify several firmware data structures, add
      compile time checks that verify that these structures have the correct
      size.
      
      Cc: Himanshu Madhani <hmadhani@marvell.com>
      Cc: Giridhar Malavali <gmalavali@marvell.com>
      Signed-off-by: default avatarBart Van Assche <bvanassche@acm.org>
      Acked-by: default avatarHimanshu Madhani <hmadhani@marvell.com>
      Signed-off-by: default avatarMartin K. Petersen <martin.petersen@oracle.com>
      bc04459c
    • Bart Van Assche's avatar
      scsi: qla2xxx: Pass little-endian values to the firmware · 6e73985a
      Bart Van Assche authored
      Pass dsd_list_len in little endian format to the firmware instead of in CPU
      endian format.
      
      Cc: Himanshu Madhani <hmadhani@marvell.com>
      Cc: Giridhar Malavali <gmalavali@marvell.com>
      Signed-off-by: default avatarBart Van Assche <bvanassche@acm.org>
      Acked-by: default avatarHimanshu Madhani <hmadhani@marvell.com>
      Signed-off-by: default avatarMartin K. Petersen <martin.petersen@oracle.com>
      6e73985a
    • Bart Van Assche's avatar
      scsi: qla2xxx: Fix race conditions in the code for aborting SCSI commands · 219d27d7
      Bart Van Assche authored
      In the *_done() functions, instead of returning early if sp->ref_count >=
      2, only decrement sp->ref_count. In qla2xxx_eh_abort(), instead of deciding
      what to do based on the value of sp->ref_count, decide which action to take
      depending on the completion status of the firmware abort. Remove srb.cwaitq
      and use srb.comp instead. In qla2x00_abort_srb(), call
      isp_ops->abort_command() directly instead of calling qla2xxx_eh_abort().
      
      Cc: Himanshu Madhani <hmadhani@marvell.com>
      Cc: Giridhar Malavali <gmalavali@marvell.com>
      Signed-off-by: default avatarBart Van Assche <bvanassche@acm.org>
      Acked-by: default avatarHimanshu Madhani <hmadhani@marvell.com>
      Signed-off-by: default avatarMartin K. Petersen <martin.petersen@oracle.com>
      219d27d7
    • Bart Van Assche's avatar
      scsi: qla2xxx: Use an on-stack completion in qla24xx_control_vp() · 982cc4be
      Bart Van Assche authored
      This patch reduces the size of struct srb.
      
      Cc: Himanshu Madhani <hmadhani@marvell.com>
      Cc: Giridhar Malavali <gmalavali@marvell.com>
      Signed-off-by: default avatarBart Van Assche <bvanassche@acm.org>
      Acked-by: default avatarHimanshu Madhani <hmadhani@marvell.com>
      Signed-off-by: default avatarMartin K. Petersen <martin.petersen@oracle.com>
      982cc4be
    • Bart Van Assche's avatar
      scsi: qla2xxx: Make qla24xx_async_abort_cmd() static · 1956eee5
      Bart Van Assche authored
      Since qla24xx_async_abort_cmd() is only called from inside qla_init.c,
      declare that function static. Reorder a few functions to avoid that any
      forward declarations are needed.
      
      Cc: Himanshu Madhani <hmadhani@marvell.com>
      Cc: Giridhar Malavali <gmalavali@marvell.com>
      Signed-off-by: default avatarBart Van Assche <bvanassche@acm.org>
      Acked-by: default avatarHimanshu Madhani <hmadhani@marvell.com>
      Signed-off-by: default avatarMartin K. Petersen <martin.petersen@oracle.com>
      1956eee5
    • Bart Van Assche's avatar
      scsi: qla2xxx: Remove unnecessary locking from the target code · 1b1e68d2
      Bart Van Assche authored
      All callbacks from the target core into the qla2xxx driver and also all I/O
      completion functions are serialized per command. Since .cmd_sent_to_fw and
      .trc_flags are only modified from inside these functions it is not
      necessary to protect it with locking. Remove the superfluous locking.
      
      Cc: Himanshu Madhani <hmadhani@marvell.com>
      Cc: Giridhar Malavali <gmalavali@marvell.com>
      Signed-off-by: default avatarBart Van Assche <bvanassche@acm.org>
      Acked-by: default avatarHimanshu Madhani <hmadhani@marvell.com>
      Signed-off-by: default avatarMartin K. Petersen <martin.petersen@oracle.com>
      1b1e68d2
    • Bart Van Assche's avatar
      scsi: qla2xxx: Remove qla_tgt_cmd.released · 4c374596
      Bart Van Assche authored
      Since the previous patch removed the only statement that sets
      qla_tgt_cmd.released, remove the code that depends on that member variable
      being set and the member variable itself.
      
      Cc: Himanshu Madhani <hmadhani@marvell.com>
      Cc: Giridhar Malavali <gmalavali@marvell.com>
      Signed-off-by: default avatarBart Van Assche <bvanassche@acm.org>
      Acked-by: default avatarHimanshu Madhani <hmadhani@marvell.com>
      Signed-off-by: default avatarMartin K. Petersen <martin.petersen@oracle.com>
      4c374596
    • Bart Van Assche's avatar
      scsi: qla2xxx: Complain if a command is released that is owned by the firmware · b1e261d4
      Bart Van Assche authored
      The previous patch guarantees that a command is only released after the
      firmware has finished processing it. Hence complain if a command is
      released that is owned by the firmware.
      
      Cc: Himanshu Madhani <hmadhani@marvell.com>
      Cc: Giridhar Malavali <gmalavali@marvell.com>
      Signed-off-by: default avatarBart Van Assche <bvanassche@acm.org>
      Acked-by: default avatarHimanshu Madhani <hmadhani@marvell.com>
      Signed-off-by: default avatarMartin K. Petersen <martin.petersen@oracle.com>
      b1e261d4
    • Bart Van Assche's avatar
      scsi: qla2xxx: target: Fix offline port handling and host reset handling · aefed3e5
      Bart Van Assche authored
      Remove the function qlt_abort_cmd_on_host_reset() because it can do the
      following, all of which can cause a kernel crash:
      
      - DMA unmapping while DMA is in progress.
      - Call target_execute_cmd() while DMA is in progress.
      - Call transport_generic_free_cmd() while the LIO core owns a command.
      
      Instead of trying to abort a command asynchronously, set the 'aborted' flag
      and handle the abort after the hardware has passed control back to the
      tcm_qla2xxx driver.
      
      Cc: Arun Easi <arun.easi@qlogic.com>
      Cc: Himanshu Madhani <hmadhani@marvell.com>
      Cc: Giridhar Malavali <gmalavali@marvell.com>
      Fixes: c0cb4496 ("qla2xxx: Add Host reset handling in target mode.") # v3.18.
      Signed-off-by: default avatarBart Van Assche <bvanassche@acm.org>
      Acked-by: default avatarHimanshu Madhani <hmadhani@marvell.com>
      Signed-off-by: default avatarMartin K. Petersen <martin.petersen@oracle.com>
      aefed3e5
    • Bart Van Assche's avatar
      scsi: qla2xxx: Fix abort handling in tcm_qla2xxx_write_pending() · e209783d
      Bart Van Assche authored
      Implementations of the .write_pending() callback functions must guarantee
      that an appropriate LIO core callback function will be called immediately or
      at a later time.  Make sure that this guarantee is met for aborted SCSI
      commands.
      
      [mkp: typo]
      
      Cc: Himanshu Madhani <hmadhani@marvell.com>
      Cc: Giridhar Malavali <gmalavali@marvell.com>
      Fixes: 694833ee ("scsi: tcm_qla2xxx: Do not allow aborted cmd to advance.") # v4.13.
      Fixes: a07100e0 ("qla2xxx: Fix TMR ABORT interaction issue between qla2xxx and TCM") # v4.5.
      Signed-off-by: default avatarBart Van Assche <bvanassche@acm.org>
      Acked-by: default avatarHimanshu Madhani <hmadhani@marvell.com>
      Signed-off-by: default avatarMartin K. Petersen <martin.petersen@oracle.com>
      e209783d
    • Bart Van Assche's avatar
      scsi: qla2xxx: Fix error handling in qlt_alloc_qfull_cmd() · c04466c1
      Bart Van Assche authored
      The test "if (!cmd)" is not useful because it is guaranteed that cmd !=
      NULL.  Instead of testing the cmd pointer, rely on the tag to decide
      whether or not command allocation failed.
      
      Cc: Himanshu Madhani <hmadhani@marvell.com>
      Cc: Giridhar Malavali <gmalavali@marvell.com>
      Fixes: 33e79977 ("qla2xxx: Add support for QFull throttling and Term Exchange retry") # v3.18.
      Signed-off-by: default avatarBart Van Assche <bvanassche@acm.org>
      Acked-by: default avatarHimanshu Madhani <hmadhani@marvell.com>
      Signed-off-by: default avatarMartin K. Petersen <martin.petersen@oracle.com>
      c04466c1
    • Bart Van Assche's avatar
      scsi: qla2xxx: Simplify qlt_send_term_imm_notif() · e65449aa
      Bart Van Assche authored
      All qlt_send_term_imm_notif() callers pass '1' as second argument to this
      function. Hence remove the (broken) code that depends on that second
      argument having another value. Add a pr_debug() statement that prints rc to
      avoid that the compiler would complain that rc has been set but is not
      used.
      
      Cc: Himanshu Madhani <hmadhani@marvell.com>
      Cc: Giridhar Malavali <gmalavali@marvell.com>
      Signed-off-by: default avatarBart Van Assche <bvanassche@acm.org>
      Acked-by: default avatarHimanshu Madhani <hmadhani@marvell.com>
      Signed-off-by: default avatarMartin K. Petersen <martin.petersen@oracle.com>
      e65449aa
    • Bart Van Assche's avatar
      scsi: qla2xxx: Fix use-after-free issues in qla2xxx_qpair_sp_free_dma() · d8f945bf
      Bart Van Assche authored
      The current order for freeing memory is as follows:
      - struct crc_context itself.
      - struct crc_context member pointers.
      
      Change the freeing order into the following:
      - struct crc_context member pointers.
      - struct crc_context itself.
      
      Detected by Coverity.
      
      Cc: Himanshu Madhani <hmadhani@marvell.com>
      Cc: Giridhar Malavali <gmalavali@marvell.com>
      Fixes: 50b81275 ("scsi: qla2xxx: Fix DMA error when the DIF sg buffer crosses 4GB boundary") # v5.1-rc1.
      Fixes: d7459527 ("scsi: qla2xxx: Add multiple queue pair functionality.") # v4.10.
      Signed-off-by: default avatarBart Van Assche <bvanassche@acm.org>
      Acked-by: default avatarHimanshu Madhani <hmadhani@marvell.com>
      Signed-off-by: default avatarMartin K. Petersen <martin.petersen@oracle.com>
      d8f945bf
    • Bart Van Assche's avatar
      scsi: qla2xxx: Fix a qla24xx_enable_msix() error path · 24afabdb
      Bart Van Assche authored
      Make sure that the allocated interrupts are freed if allocating memory for
      the msix_entries array fails.
      
      Cc: Himanshu Madhani <hmadhani@marvell.com>
      Cc: Giridhar Malavali <gmalavali@marvell.com>
      Signed-off-by: default avatarBart Van Assche <bvanassche@acm.org>
      Acked-by: default avatarHimanshu Madhani <hmadhani@marvell.com>
      Signed-off-by: default avatarMartin K. Petersen <martin.petersen@oracle.com>
      24afabdb
    • Bart Van Assche's avatar
      scsi: qla2xxx: Avoid that qla2x00_mem_free() crashes if called twice · dc035d4e
      Bart Van Assche authored
      Clear each pointer after having freed memory such that it becomes safe to
      call qla2x00_mem_free() twice.
      
      Cc: Himanshu Madhani <hmadhani@marvell.com>
      Cc: Giridhar Malavali <gmalavali@marvell.com>
      Signed-off-by: default avatarBart Van Assche <bvanassche@acm.org>
      Acked-by: default avatarHimanshu Madhani <hmadhani@marvell.com>
      Signed-off-by: default avatarMartin K. Petersen <martin.petersen@oracle.com>
      dc035d4e
    • Bart Van Assche's avatar
      scsi: qla2xxx: Make qla2x00_mem_free() easier to verify · 5365bf99
      Bart Van Assche authored
      Instead of clearing all freed pointers at the end of qla2x00_mem_free(),
      clear freed pointers immediately after having freed the memory these
      pointers point at.
      
      Cc: Himanshu Madhani <hmadhani@marvell.com>
      Cc: Giridhar Malavali <gmalavali@marvell.com>
      Signed-off-by: default avatarBart Van Assche <bvanassche@acm.org>
      Acked-by: default avatarHimanshu Madhani <hmadhani@marvell.com>
      Signed-off-by: default avatarMartin K. Petersen <martin.petersen@oracle.com>
      5365bf99
    • Bart Van Assche's avatar
      scsi: qla2xxx: Increase the size of the mailbox arrays from 4 to 8 · 0a59cea4
      Bart Van Assche authored
      This patch avoids that Coverity complains that qla2x00_async_event() writes
      outside the bounds of the mb[] arrays (MBA_IDC_AEN case).
      
      Cc: Himanshu Madhani <hmadhani@marvell.com>
      Cc: Giridhar Malavali <gmalavali@marvell.com>
      Signed-off-by: default avatarBart Van Assche <bvanassche@acm.org>
      Acked-by: default avatarHimanshu Madhani <hmadhani@marvell.com>
      Signed-off-by: default avatarMartin K. Petersen <martin.petersen@oracle.com>
      0a59cea4
    • Bart Van Assche's avatar
      scsi: qla2xxx: Log the status code if a firmware command fails · 3f918ffa
      Bart Van Assche authored
      It is important to know why a firmware command failed. Hence log 'rval'
      together with the values of the mailbox registers if a firwmare command
      fails.
      
      Cc: Himanshu Madhani <hmadhani@marvell.com>
      Cc: Giridhar Malavali <gmalavali@marvell.com>
      Signed-off-by: default avatarBart Van Assche <bvanassche@acm.org>
      Acked-by: default avatarHimanshu Madhani <hmadhani@marvell.com>
      Signed-off-by: default avatarMartin K. Petersen <martin.petersen@oracle.com>
      3f918ffa
    • Bart Van Assche's avatar
      scsi: qla2xxx: Avoid that Coverity complains about dereferencing a NULL rport pointer · 2dbb02fd
      Bart Van Assche authored
      Since Coverity cannot know that rport != NULL in qla2xxx_queuecommand() and
      since there is code in that function that dereferences the rport pointer,
      modify qla2xxx_queuecommand() such that it fails SCSI commands if rport ==
      NULL.
      
      Cc: Himanshu Madhani <hmadhani@marvell.com>
      Cc: Giridhar Malavali <gmalavali@marvell.com>
      Signed-off-by: default avatarBart Van Assche <bvanassche@acm.org>
      Acked-by: default avatarHimanshu Madhani <hmadhani@marvell.com>
      Signed-off-by: default avatarMartin K. Petersen <martin.petersen@oracle.com>
      2dbb02fd
    • Bart Van Assche's avatar
      scsi: qla2xxx: Remove the fcport test from qla_nvme_abort_work() · dafbe56f
      Bart Van Assche authored
      Testing whether a pointer is not NULL after it has been dereferenced is not
      useful. Hence remove the if (fcport) test. This was detected by Coverity.
      
      Cc: Himanshu Madhani <hmadhani@marvell.com>
      Cc: Giridhar Malavali <gmalavali@marvell.com>
      Signed-off-by: default avatarBart Van Assche <bvanassche@acm.org>
      Acked-by: default avatarHimanshu Madhani <hmadhani@marvell.com>
      Signed-off-by: default avatarMartin K. Petersen <martin.petersen@oracle.com>
      dafbe56f
    • Bart Van Assche's avatar
      scsi: qla2xxx: Uninline qla2x00_init_timer() · 12975426
      Bart Van Assche authored
      Since qla2x00_init_timer() is not used for I/O commands there is no need to
      inline this function. Hence uninline this function.
      
      Cc: Himanshu Madhani <hmadhani@marvell.com>
      Cc: Giridhar Malavali <gmalavali@marvell.com>
      Signed-off-by: default avatarBart Van Assche <bvanassche@acm.org>
      Acked-by: default avatarHimanshu Madhani <hmadhani@marvell.com>
      Signed-off-by: default avatarMartin K. Petersen <martin.petersen@oracle.com>
      12975426
    • Bart Van Assche's avatar
      scsi: qla2xxx: Move qla2x00_is_reserved_id() from qla_inline.h into qla_init.c · 0c6660b2
      Bart Van Assche authored
      The previous patch moved all qla2x00_is_reserved_id() callers into
      qla_init.c. Hence also move the qla2x00_is_reserved_id() definition into
      qla_init.c.
      
      Cc: Himanshu Madhani <hmadhani@marvell.com>
      Cc: Giridhar Malavali <gmalavali@marvell.com>
      Signed-off-by: default avatarBart Van Assche <bvanassche@acm.org>
      Acked-by: default avatarHimanshu Madhani <hmadhani@marvell.com>
      Signed-off-by: default avatarMartin K. Petersen <martin.petersen@oracle.com>
      0c6660b2
    • Bart Van Assche's avatar
      scsi: qla2xxx: Move qla2x00_clear_loop_id() from qla_inline.h into qla_init.c · ef1eb688
      Bart Van Assche authored
      Since qla2x00_clear_loop_id() is not in the hot path, uninline it.
      
      Cc: Himanshu Madhani <hmadhani@marvell.com>
      Cc: Giridhar Malavali <gmalavali@marvell.com>
      Signed-off-by: default avatarBart Van Assche <bvanassche@acm.org>
      Acked-by: default avatarHimanshu Madhani <hmadhani@marvell.com>
      Signed-off-by: default avatarMartin K. Petersen <martin.petersen@oracle.com>
      ef1eb688
    • Bart Van Assche's avatar
      scsi: qla2xxx: Remove a set-but-not-used variable · 6eaa5f94
      Bart Van Assche authored
      Cc: Himanshu Madhani <hmadhani@marvell.com>
      Cc: Giridhar Malavali <gmalavali@marvell.com>
      Signed-off-by: default avatarBart Van Assche <bvanassche@acm.org>
      Acked-by: default avatarHimanshu Madhani <hmadhani@marvell.com>
      Signed-off-by: default avatarMartin K. Petersen <martin.petersen@oracle.com>
      6eaa5f94
    • Bart Van Assche's avatar
      scsi: qla2xxx: Declare qla2x00_find_new_loop_id() static · 94f5b916
      Bart Van Assche authored
      Since all qla2x00_find_new_loop_id() calls occur in the same source file as
      the definition of this function, move that function to just before its
      first caller and declare it static. Convert the header above this function
      into kernel-doc format.
      
      Cc: Himanshu Madhani <hmadhani@marvell.com>
      Cc: Giridhar Malavali <gmalavali@marvell.com>
      Signed-off-by: default avatarBart Van Assche <bvanassche@acm.org>
      Acked-by: default avatarHimanshu Madhani <hmadhani@marvell.com>
      Signed-off-by: default avatarMartin K. Petersen <martin.petersen@oracle.com>
      94f5b916