"hdr" can't be NULL.  We take skb->data which is non-NULL and add an
offset to get "hdr".
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove "struct pt_regs *" parameter from interrupt handlers, since
it is no longer passed to interrupt handlers. Also, convert return
types to irqreturn_t.

Additionally, move DIO_irq_handler variable into the setup_GPIO
function, as it's not used outside of this function.
Signed-off-by: Cihangir Akturk <cakturk@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This printk doesn't really add anything worthwhile.
Signed-off-by: Shurong Zhang <zhang_shurong@foxmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The call to _rtl_dbg_trace via macro HALMAC_RT_TRACE will trigger a null
pointer deference on the null driver_adapter.  Fix this by assigning
driver_adapter earlier to halmac_adapter->driver_adapter before the tracing
call so that a non-null driver_adapter is passed instead.

Detected by CoverityScan, CID#1454613 ("Explicit null dereferenced")

Fixes: 938a0447 ("staging: r8822be: Add code for halmac sub-driver")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

A memory leak of eeprom_map occurs if the call to halmac_eeprom_parser_88xx
fails. Fix this by kfree'ing it before returning.

Detected by CoverityScan, CID#1454569 ("Resource leak")
Fixes: 938a0447 ("staging: r8822be: Add code for halmac sub-driver")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The obd_init_checks() function can either return -EOVERFLOW or -EINVAL
but we accidentally ignore -EINVAL returns.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The copy_from_user() function returns the number of bytes which we
weren't able to copy.  We don't want to return that to the user but
instead we want to return -EFAULT.

Fixes: d7e09d03 ("staging: add Lustre file system client support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

We recently changed from using obd_ioctl_popdata() to calling
copy_to_user() directly.  This if statement was supposed to be deleted
but it was over looked.  "err" is zero at this point so it means we
return success.

Fixes: b03679f6 ("staging: lustre: uapi: remove obd_ioctl_popdata() wrapper")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

calling memcpy immediately after memset with the same region of memory
makes memset redundant.

Build successfully.
Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The changes in this commit are also being sent to the main rtlwifi
drivers in wireless-next; however, these changes will also be useful for
any debugging of r8822be before it gets moved into the main tree.

Use debugfs to dump register and btcoex status, and also write registers
and h2c.

We create topdir in /sys/kernel/debug/rtlwifi/, and use the MAC address
as subdirectory with several entries to dump mac_reg, bb_reg, rf_reg etc.
An example is
    /sys/kernel/debug/rtlwifi/00-11-22-33-44-55-66/mac_0

This change permits examination of device registers in a dynamic manner,
a feature not available with the current debug mechanism.

We use seq_file to replace RT_TRACE to dump status, then we can use 'cat'
to access btcoex's status through debugfs.
(i.e. /sys/kernel/debug/rtlwifi/00-11-22-33-44-55-66/btcoex)
Other related changes are
1. implement btc_disp_dbg_msg() to access btcoex's common status.
2. remove obsolete field bt_exist
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Yan-Hsuan Chuang <yhchuang@realtek.com>
Cc: Birming Chiu <birming@realtek.com>
Cc: Shaofu <shaofu@realtek.com>
Cc: Steven Ting <steventing@realtek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Smatch is distrustful of the "capab" value and marks it as user
controlled.  I think it actually comes from the firmware?  Anyway, I
looked at other drivers and they added a bounds check and it seems like
a harmless thing to have so I have added it here as well.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch is created to solve the following coding style issue reported
by the checkpatch script.
CHECK: spaces preffered around that '&' (ctx:VxV)
Signed-off-by: Janani Sankara Babu <jananis37@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch solves the following warning shown by the checkpatch script
WARNING: Comparisons should place the constants on the right side of
the test
Signed-off-by: Janani Sankara Babu <jananis37@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Kfree on NULL pointer is a no-op and therefore checking is redundant.
Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

call to memset to assign 0 value immediately after allocating
memory with kzalloc is unnecesaary as kzalloc allocates the memory
filled with 0 value.

Build and tested it.
Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Register with module_driver macro instead of module_init/module_exit.
Signed-off-by: Alex Briskin <br.shurik@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Like the version in drivers/net/wireless, this driver requires the
MAC80211 framework, otherwise we run into a link error:

ERROR: "ieee80211_rx_irqsafe" [drivers/staging/rtlwifi/r8822be.ko] undefined!
ERROR: "cfg80211_unlink_bss" [drivers/staging/rtlwifi/r8822be.ko] undefined!
ERROR: "ieee80211_beacon_get_tim" [drivers/staging/rtlwifi/r8822be.ko] undefined!
ERROR: "ieee80211_resume_disconnect" [drivers/staging/rtlwifi/r8822be.ko] undefined!

This adds the Kconfig dependency for it.

Fixes: 56bde846 ("staging: r8822be: Add existing rtlwifi and rtl_pci parts for new driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gcc notices a very complicated way to check a value
for being equal to one, and warns about it:

drivers/staging/rtlwifi/btcoexist/halbtc8822b1ant.c: In function 'halbtc8822b1ant_set_ext_ant_switch':
drivers/staging/rtlwifi/btcoexist/halbtc8822b1ant.c:2105:9: error: '~' on a boolean expression [-Werror=bool-operation]
         ~switch_polatiry_inverse :
         ^
drivers/staging/rtlwifi/btcoexist/halbtc8822b1ant.c:2105:9: note: did you mean to use logical not?
         ~switch_polatiry_inverse :
         ^

This simplifies this expression to make it more readable
and to make gcc happy.

Fixes: 56bde846 ("staging: r8822be: Add existing rtlwifi and rtl_pci parts for new driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This function contains a series of interdependent conditions,
slightly more than gcc can follow handle apparently:

drivers/staging/rtlwifi/base.c: In function 'rtl_check_beacon_key':
drivers/staging/rtlwifi/base.c:2546:34: error: 'ht_cap_ie' may be used uninitialized in this function [-Werror=maybe-uninitialized]

This moves the code around a bit, to simplify the conditions
enough that gcc can see that all variables are correctly
initialized.

Fixes: 56bde846 ("staging: r8822be: Add existing rtlwifi and rtl_pci parts for new driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Changed dev_err() call to use function name constant instead of hardcoded
string. Issue found by checkpatch.
Signed-off-by: Bryan Garza <bry@riseup.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The crypto API requires saving the last blocks of ciphertext
in req->info for use as IV for CTS mode. The ccree driver
was not doing this. This patch fixes that.

The bug was manifested with cts(cbc(aes)) mode in tcrypt tests.

Fixes: 302ef8eb ("Add CryptoCell skcipher support")
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Throughout the driver we use == 0 / != 0 to check strcmp() returns except
this place, so fix it.
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rationalize include paths in all the lnet header files.
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rationalize include paths in all the libcfs header files.
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rationalize include paths in the libcfs source code files.
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rationalize include paths in the ksocklnd source code files.
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rationalize include paths in the ko2iblnd source code files.
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rationalize include paths in the lnet core source code files.
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rationalize include paths in the lnet selftest source code files.
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rationalize include paths for the lustre uapi headers
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rationalize include paths for the lustre internal headers
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rationalize include paths in the osc source code files.
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rationalize include paths in the obdecho source code files.
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rationalize include paths in the obdclass source code files.
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rationalize include paths in the mgc source code files.
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rationalize include paths in the mdc source code files.
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rationalize include paths in the lov source code files.
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rationalize include paths in the lmv source code files.
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rationalize include paths in the llite source code files.
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rationalize include paths in the ptlrpc/ldlm source code files.
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>