- 09 Jan, 2020 40 commits
-
-
Colin Ian King authored
commit d60229d8 upstream. The return from pnp_irq is an unsigned integer type resource_size_t and hence the error check for a positive non-error code is always going to be true. A check for a non-failure return from pnp_irq should in fact be for (resource_size_t)-1 rather than >= 0. Addresses-Coverity: ("Unsigned compared against 0") Fixes: a9824c86 ("[ALSA] Add CS4232 PnP BIOS support") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20191122131354.58042-1-colin.king@canonical.comSigned-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
John Johansen authored
commit 8c62ed27 upstream. aa_xattrs_match() is unfortunately calling vfs_getxattr_alloc() from a context protected by an rcu_read_lock. This can not be done as vfs_getxattr_alloc() may sleep regardles of the gfp_t value being passed to it. Fix this by breaking the rcu_read_lock on the policy search when the xattr match feature is requested and restarting the search if a policy changes occur. Fixes: 8e51f908 ("apparmor: Add support for attaching profiles via xattr, presence and value") Reported-by:
Jia-Ju Bai <baijiaju1990@gmail.com> Reported-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
John Johansen <john.johansen@canonical.com> Signed-off-by:
-
Sven Schnelle authored
commit fe6e096a upstream. At least on PA-RISC and s390 synthetic histogram triggers are failing selftests because trace_event_raw_event_synth() always writes a 64 bit values, but the reader expects a field->size sized value. On little endian machines this doesn't hurt, but on big endian this makes the reader always read zero values. Link: http://lore.kernel.org/linux-trace-devel/20191218074427.96184-4-svens@linux.ibm.com Cc: stable@vger.kernel.org Fixes: 4b147936 ("tracing: Add support for 'synthetic' events") Acked-by:
Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by:
Sven Schnelle <svens@linux.ibm.com> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
Steven Rostedt (VMware) authored
commit 106f41f5 upstream. The compare functions of the histogram code would be specific for the size of the value being compared (byte, short, int, long long). It would reference the value from the array via the type of the compare, but the value was stored in a 64 bit number. This is fine for little endian machines, but for big endian machines, it would end up comparing zeros or all ones (depending on the sign) for anything but 64 bit numbers. To fix this, first derference the value as a u64 then convert it to the type being compared. Link: http://lkml.kernel.org/r/20191211103557.7bed6928@gandalf.local.home Cc: stable@vger.kernel.org Fixes: 08d43a5f ("tracing: Add lock-free tracing_map") Acked-by:
Tom Zanussi <zanussi@kernel.org> Reported-by:
Sven Schnelle <svens@stackframe.org> Signed-off-by:
-
Keita Suzuki authored
commit 79e65c27 upstream. When failing in the allocation of filter_item, process_system_preds() goes to fail_mem, where the allocated filter is freed. However, this leads to memory leak of filter->filter_string and filter->prog, which is allocated before and in process_preds(). This bug has been detected by kmemleak as well. Fix this by changing kfree to __free_fiter. unreferenced object 0xffff8880658007c0 (size 32): comm "bash", pid 579, jiffies 4295096372 (age 17.752s) hex dump (first 32 bytes): 63 6f 6d 6d 6f 6e 5f 70 69 64 20 20 3e 20 31 30 common_pid > 10 00 00 00 00 00 00 00 00 65 73 00 00 00 00 00 00 ........es...... backtrace: [<0000000067441602>] kstrdup+0x2d/0x60 [<00000000141cf7b7>] apply_subsystem_event_filter+0x378/0x932 [<000000009ca32334>] subsystem_filter_write+0x5a/0x90 [<0000000072da2bee>] vfs_write+0xe1/0x240 [<000000004f14f473>] ksys_write+0xb4/0x150 [<00000000a968b4a0>] do_syscall_64+0x6d/0x1e0 [<000000001a189f40>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 unreferenced object 0xffff888060c22d00 (size 64): comm "bash", pid 579, jiffies 4295096372 (age 17.752s) hex dump (first 32 bytes): 01 00 00 00 00 00 00 00 00 e8 d7 41 80 88 ff ff ...........A.... 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000b8c1b109>] process_preds+0x243/0x1820 [<000000003972c7f0>] apply_subsystem_event_filter+0x3be/0x932 [<000000009ca32334>] subsystem_filter_write+0x5a/0x90 [<0000000072da2bee>] vfs_write+0xe1/0x240 [<000000004f14f473>] ksys_write+0xb4/0x150 [<00000000a968b4a0>] do_syscall_64+0x6d/0x1e0 [<000000001a189f40>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 unreferenced object 0xffff888041d7e800 (size 512): comm "bash", pid 579, jiffies 4295096372 (age 17.752s) hex dump (first 32 bytes): 70 bc 85 97 ff ff ff ff 0a 00 00 00 00 00 00 00 p............... 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<000000001e04af34>] process_preds+0x71a/0x1820 [<000000003972c7f0>] apply_subsystem_event_filter+0x3be/0x932 [<000000009ca32334>] subsystem_filter_write+0x5a/0x90 [<0000000072da2bee>] vfs_write+0xe1/0x240 [<000000004f14f473>] ksys_write+0xb4/0x150 [<00000000a968b4a0>] do_syscall_64+0x6d/0x1e0 [<000000001a189f40>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Link: http://lkml.kernel.org/r/20191211091258.11310-1-keitasuzuki.park@sslab.ics.keio.ac.jp Cc: Ingo Molnar <mingo@redhat.com> Cc: stable@vger.kernel.org Fixes: 404a3add ("tracing: Only add filter list when needed") Signed-off-by:
Keita Suzuki <keitasuzuki.park@sslab.ics.keio.ac.jp> Signed-off-by:
-
Prateek Sood authored
commit 3a53acf1 upstream. Task T2 Task T3 trace_options_core_write() subsystem_open() mutex_lock(trace_types_lock) mutex_lock(event_mutex) set_tracer_flag() trace_event_enable_tgid_record() mutex_lock(trace_types_lock) mutex_lock(event_mutex) This gives a circular dependency deadlock between trace_types_lock and event_mutex. To fix this invert the usage of trace_types_lock and event_mutex in trace_options_core_write(). This keeps the sequence of lock usage consistent. Link: http://lkml.kernel.org/r/0101016eef175e38-8ca71caf-a4eb-480d-a1e6-6f0bbc015495-000000@us-west-2.amazonses.com Cc: stable@vger.kernel.org Fixes: d914ba37 ("tracing: Add support for recording tgid of tasks") Signed-off-by:
Prateek Sood <prsood@codeaurora.org> Signed-off-by:
-
Mathieu Desnoyers authored
commit 8df34c56 upstream. glibc 2.30 introduces gettid() in public headers, which clashes with the internal static definition within rseq selftests. Rename gettid() to rseq_gettid() to eliminate this symbol name clash. Reported-by:
Tommi T. Rantala <tommi.t.rantala@nokia.com> Signed-off-by:
Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Shuah Khan <skhan@linuxfoundation.org> Cc: Tommi T. Rantala <tommi.t.rantala@nokia.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: "Paul E. McKenney" <paulmck@linux.ibm.com> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: "H . Peter Anvin" <hpa@zytor.com> Cc: Paul Turner <pjt@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: <stable@vger.kernel.org> # v4.18+ Signed-off-by:
Shuah Khan <skhan@linuxfoundation.org> Signed-off-by:
-
Zong Li authored
commit 1d8f6579 upstream. The condition should be logical NOT to assign the hook address to parent address. Because the return value 0 of function_graph_enter upon success. Fixes: e949b6db (riscv/function_graph: Simplify with function_graph_enter()) Signed-off-by:
Zong Li <zong.li@sifive.com> Reviewed-by:
Paul Walmsley <paul.walmsley@sifive.com> Signed-off-by:
-
Russell King authored
commit 256efaea upstream. gpiolib has a corner case with open drain outputs that are emulated. When such outputs are outputting a logic 1, emulation will set the hardware to input mode, which will cause gpiod_get_direction() to report that it is in input mode. This is different from the behaviour with a true open-drain output. Unify the semantics here. Cc: <stable@vger.kernel.org> Suggested-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by:
-
Sascha Hauer authored
commit 8385d756 upstream. ata_qc_complete_multiple() is called with a mask of the still active tags. mv_sata doesn't have this information directly and instead calculates the still active tags from the started tags (ap->qc_active) and the finished tags as (ap->qc_active ^ done_mask) Since 28361c40 the hw_tag and tag are no longer the same and the equation is no longer valid. In ata_exec_internal_sg() ap->qc_active is initialized as 1ULL << ATA_TAG_INTERNAL, but in hardware tag 0 is started and this will be in done_mask on completion. ap->qc_active ^ done_mask becomes 0x100000000 ^ 0x1 = 0x100000001 and thus tag 0 used as the internal tag will never be reported as completed. This is fixed by introducing ata_qc_get_active() which returns the active hardware tags and calling it where appropriate. This is tested on mv_sata, but sata_fsl and sata_nv suffer from the same problem. There is another case in sata_nv that most likely needs fixing as well, but this looks a little different, so I wasn't confident enough to change that. Fixes: 28361c40 ("libata: add extra internal command") Cc: stable@vger.kernel.org Tested-by:
Pali Rohár <pali.rohar@gmail.com> Signed-off-by:
Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by:
Jens Axboe <axboe@kernel.dk>
-
Florian Fainelli authored
commit 1a3d78cb upstream. Set AHCI_HFLAG_DELAY_ENGINE for the BCM7425 AHCI controller thus making it conforming to the 'strict' AHCI implementation which this controller is based on. This solves long link establishment with specific hard drives (e.g.: Seagate ST1000VM002-9ZL1 SC12) that would otherwise have to complete the error recovery handling before finally establishing a succesful SATA link at the desired speed. We re-order the hpriv->flags assignment to also remove the NONCQ quirk since we can set the flag directly. Fixes: 9586114cf1e9 ("ata: ahci_brcmstb: add support MIPS-based platforms") Fixes: 423be77daabe ("ata: ahci_brcmstb: add quirk for broken ncq") Cc: stable@vger.kernel.org Reviewed-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Florian Fainelli authored
commit bf0e5013 upstream. The downstream implementation of ahci_brcm.c did contain clock management recovery, but until recently, did that outside of the libahci_platform helpers and this was unintentionally stripped out while forward porting the patch upstream. Add the missing clock management during recovery and sleep for 10 milliseconds per the design team recommendations to ensure the SATA PHY controller and AFE have been fully quiesced. Fixes: eb73390a ("ata: ahci_brcm: Recover from failures to identify devices") Cc: stable@vger.kernel.org Reviewed-by:
-
Florian Fainelli authored
commit 2b2c47d9 upstream. On BCM63138, we need to reset the AHCI core prior to start utilizing it, grab the reset controller device cookie and do that. Signed-off-by:
-
Florian Fainelli authored
commit c0cdf2ac upstream. The AHCI resources management within ahci_brcm.c is a little convoluted, largely because it historically had a dedicated clock that was managed within this file in the downstream tree. Once brough upstream though, the clock was left to be managed by libahci_platform.c which is entirely appropriate. This patch series ensures that the AHCI resources are fetched and enabled before any register access is done, thus avoiding bus errors on platforms which clock gate the controller by default. As a result we need to re-arrange the suspend() and resume() functions in order to avoid accessing registers after the clocks have been turned off respectively before the clocks have been turned on. Finally, we can refactor brcm_ahci_get_portmask() in order to fetch the number of ports from hpriv->mmio which is now accessible without jumping through hoops like we used to do. The commit pointed in the Fixes tag is both old and new enough not to require major headaches for backporting of this patch. Fixes: eba68f82 ("ata: ahci_brcmstb: rename to support across Broadcom SoC's") Cc: stable@vger.kernel.org Reviewed-by:
-
Florian Fainelli authored
commit 84b032db upstream. This reverts commit 6bb86fef ("libahci_platform: Staticize ahci_platform_<en/dis>able_phys()") we are going to need ahci_platform_{enable,disable}_phys() in a subsequent commit for ahci_brcm.c in order to properly control the PHY initialization order. Also make sure the function prototypes are declared in include/linux/ahci_platform.h as a result. Cc: stable@vger.kernel.org Reviewed-by:
-
Arnd Bergmann authored
commit 673bdf8c upstream. These were added to blkdev_ioctl() but not blkdev_compat_ioctl, so add them now. Cc: <stable@vger.kernel.org> # v4.10+ Fixes: 3ed05a98 ("blk-zoned: implement ioctls") Reviewed-by:
Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Arnd Bergmann authored
commit b2c0fcd2 upstream. These were added to blkdev_ioctl() in linux-5.5 but not blkdev_compat_ioctl, so add them now. Cc: <stable@vger.kernel.org> # v4.4+ Fixes: bbd3e064 ("block: add an API for Persistent Reservations") Signed-off-by:
-
Lukas Wunner authored
commit 53a256a9 upstream. dmaengine_desc_set_reuse() allocates a struct dma_slave_caps on the stack, populates it using dma_get_slave_caps() and then accesses one of its members. However dma_get_slave_caps() may fail and this isn't accounted for, leading to a legitimate warning of gcc-4.9 (but not newer versions): In file included from drivers/spi/spi-bcm2835.c:19:0: drivers/spi/spi-bcm2835.c: In function 'dmaengine_desc_set_reuse': >> include/linux/dmaengine.h:1370:10: warning: 'caps.descriptor_reuse' is used uninitialized in this function [-Wuninitialized] if (caps.descriptor_reuse) { Fix it, thereby also silencing the gcc-4.9 warning. The issue has been present for 4 years but surfaces only now that the first caller of dmaengine_desc_set_reuse() has been added in spi-bcm2835.c. Another user of reusable DMA descriptors has existed for a while in pxa_camera.c, but it sets the DMA_CTRL_REUSE flag directly instead of calling dmaengine_desc_set_reuse(). Nevertheless, tag this commit for stable in case there are out-of-tree users. Fixes: 27242021 ("dmaengine: Add DMA_CTRL_REUSE") Reported-by:
kbuild test robot <lkp@intel.com> Signed-off-by:
Lukas Wunner <lukas@wunner.de> Cc: stable@vger.kernel.org # v4.3+ Link: https://lore.kernel.org/r/ca92998ccc054b4f2bfd60ef3adbab2913171eac.1575546234.git.lukas@wunner.deSigned-off-by:
Vinod Koul <vkoul@kernel.org> Signed-off-by:
-
Amir Goldstein authored
commit 98ca480a upstream. An ino is unsigned, so display it as such in /proc/locks. Cc: stable@vger.kernel.org Signed-off-by:
Amir Goldstein <amir73il@gmail.com> Signed-off-by:
Jeff Layton <jlayton@kernel.org> Signed-off-by:
-
Aleksandr Yashkin authored
commit 9e5f1c19 upstream. The ram_core.c routines treat przs as circular buffers. When writing a new crash dump, the old buffer needs to be cleared so that the new dump doesn't end up in the wrong place (i.e. at the end). The solution to this problem is to reset the circular buffer state before writing a new Oops dump. Signed-off-by:
Aleksandr Yashkin <a.yashkin@inango-systems.com> Signed-off-by:
Nikolay Merinov <n.merinov@inango-systems.com> Signed-off-by:
Ariel Gilman <a.gilman@inango-systems.com> Link: https://lore.kernel.org/r/20191223133816.28155-1-n.merinov@inango-systems.com Fixes: 896fc1f0 ("pstore/ram: Switch to persistent_ram routines") Cc: stable@vger.kernel.org Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Yang Shi authored
commit e0153fc2 upstream. Felix Abecassis reports move_pages() would return random status if the pages are already on the target node by the below test program: int main(void) { const long node_id = 1; const long page_size = sysconf(_SC_PAGESIZE); const int64_t num_pages = 8; unsigned long nodemask = 1 << node_id; long ret = set_mempolicy(MPOL_BIND, &nodemask, sizeof(nodemask)); if (ret < 0) return (EXIT_FAILURE); void **pages = malloc(sizeof(void*) * num_pages); for (int i = 0; i < num_pages; ++i) { pages[i] = mmap(NULL, page_size, PROT_WRITE | PROT_READ, MAP_PRIVATE | MAP_POPULATE | MAP_ANONYMOUS, -1, 0); if (pages[i] == MAP_FAILED) return (EXIT_FAILURE); } ret = set_mempolicy(MPOL_DEFAULT, NULL, 0); if (ret < 0) return (EXIT_FAILURE); int *nodes = malloc(sizeof(int) * num_pages); int *status = malloc(sizeof(int) * num_pages); for (int i = 0; i < num_pages; ++i) { nodes[i] = node_id; status[i] = 0xd0; /* simulate garbage values */ } ret = move_pages(0, num_pages, pages, nodes, status, MPOL_MF_MOVE); printf("move_pages: %ld\n", ret); for (int i = 0; i < num_pages; ++i) printf("status[%d] = %d\n", i, status[i]); } Then running the program would return nonsense status values: $ ./move_pages_bug move_pages: 0 status[0] = 208 status[1] = 208 status[2] = 208 status[3] = 208 status[4] = 208 status[5] = 208 status[6] = 208 status[7] = 208 This is because the status is not set if the page is already on the target node, but move_pages() should return valid status as long as it succeeds. The valid status may be errno or node id. We can't simply initialize status array to zero since the pages may be not on node 0. Fix it by updating status with node id which the page is already on. Link: http://lkml.kernel.org/r/1575584353-125392-1-git-send-email-yang.shi@linux.alibaba.com Fixes: a49bd4d7 ("mm, numa: rework do_pages_move") Signed-off-by:
Yang Shi <yang.shi@linux.alibaba.com> Reported-by:
Felix Abecassis <fabecassis@nvidia.com> Tested-by:
Michal Hocko <mhocko@suse.com> Reviewed-by:
John Hubbard <jhubbard@nvidia.com> Acked-by:
Christoph Lameter <cl@linux.com> Acked-by:
Vlastimil Babka <vbabka@suse.cz> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: <stable@vger.kernel.org> [4.17+] Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Shakeel Butt authored
commit 84029fd0 upstream. The cred_jar kmem_cache is already memcg accounted in the current kernel but cred->security is not. Account cred->security to kmemcg. Recently we saw high root slab usage on our production and on further inspection, we found a buggy application leaking processes. Though that buggy application was contained within its memcg but we observe much more system memory overhead, couple of GiBs, during that period. This overhead can adversely impact the isolation on the system. One source of high overhead we found was cred->security objects, which have a lifetime of at least the life of the process which allocated them. Link: http://lkml.kernel.org/r/20191205223721.40034-1-shakeelb@google.comSigned-off-by:
Shakeel Butt <shakeelb@google.com> Acked-by:
Chris Down <chris@chrisdown.name> Reviewed-by:
Roman Gushchin <guro@fb.com> Acked-by:
-
Chanho Min authored
commit ac8f05da upstream. When zspage is migrated to the other zone, the zone page state should be updated as well, otherwise the NR_ZSPAGE for each zone shows wrong counts including proc/zoneinfo in practice. Link: http://lkml.kernel.org/r/1575434841-48009-1-git-send-email-chanho.min@lge.com Fixes: 91537fee ("mm: add NR_ZSMALLOC to vmstat") Signed-off-by:
Chanho Min <chanho.min@lge.com> Signed-off-by:
Jinsuk Choi <jjinsuk.choi@lge.com> Reviewed-by:
Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Acked-by:
Minchan Kim <minchan@kernel.org> Cc: <stable@vger.kernel.org> [4.9+] Signed-off-by:
-
Hans Verkuil authored
commit ac479b51 upstream. Currently wait_event_interruptible_timeout is called in cec_thread_func() when adap->transmitting is set. But if the adapter is unconfigured while transmitting, then adap->transmitting is set to NULL. But the hardware is still actually transmitting the message, and that's indicated by adap->transmit_in_progress and we should wait until that is finished or times out before transmitting new messages. As the original commit says: adap->transmitting is the userspace view, adap->transmit_in_progress reflects the hardware state. However, if adap->transmitting is NULL and adap->transmit_in_progress is true, then wait_event_interruptible is called (no timeout), which can get stuck indefinitely if the CEC driver is flaky and never marks the transmit-in-progress as 'done'. So test against transmit_in_progress when deciding whether to use the timeout variant or not, instead of testing against adap->transmitting. Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Fixes: 32804fcb ("media: cec: keep track of outstanding transmits") Cc: <stable@vger.kernel.org> # for v4.19 and up Signed-off-by:
Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by:
-
Hans Verkuil authored
commit 95c29d46 upstream. WARN if transmit_queue_sz is 0 but do not decrement it. The CEC adapter will become unresponsive if it goes below 0 since then it thinks there are 4 billion messages in the queue. Obviously this should not happen, but a driver bug could cause this. Signed-off-by:
-
Hans Verkuil authored
commit cec935ce upstream. Some messages are allowed to be a broadcast message in CEC 2.0 only, and should be ignored by CEC 1.4 devices. Unfortunately, the check was wrong, causing such messages to be marked as invalid under CEC 2.0. Signed-off-by:
-
Hans Verkuil authored
commit e5a52a1d upstream. The periodic PING command could interfere with the result of a CEC transmit, causing a lost cec_transmit_attempt_done() call. Signed-off-by:
-
Paul Burton authored
commit bbcc5672 upstream. Declaring __current_thread_info as a global register variable has the effect of preventing GCC from saving & restoring its value in cases where the ABI would typically do so. To quote GCC documentation: > If the register is a call-saved register, call ABI is affected: the > register will not be restored in function epilogue sequences after the > variable has been assigned. Therefore, functions cannot safely return > to callers that assume standard ABI. When our position independent VDSO is built for the n32 or n64 ABIs all functions it exposes should be preserving the value of $gp/$28 for their caller, but in the presence of the __current_thread_info global register variable GCC stops doing so & simply clobbers $gp/$28 when calculating the address of the GOT. In cases where the VDSO returns success this problem will typically be masked by the caller in libc returning & restoring $gp/$28 itself, but that is by no means guaranteed. In cases where the VDSO returns an error libc will typically contain a fallback path which will now fail (typically with a bad memory access) if it attempts anything which relies upon the value of $gp/$28 - eg. accessing anything via the GOT. One fix for this would be to move the declaration of __current_thread_info inside the current_thread_info() function, demoting it from global register variable to local register variable & avoiding inadvertently creating a non-standard calling ABI for the VDSO. Unfortunately this causes issues for clang, which doesn't support local register variables as pointed out by commit fe92da0f ("MIPS: Changed current_thread_info() to an equivalent supported by both clang and GCC") which introduced the global register variable before we had a VDSO to worry about. Instead, fix this by continuing to use the global register variable for the kernel proper but declare __current_thread_info as a simple extern variable when building the VDSO. It should never be referenced, and will cause a link error if it is. This resolves the calling convention issue for the VDSO without having any impact upon the build of the kernel itself for either clang or gcc. Signed-off-by:
Paul Burton <paulburton@kernel.org> Fixes: ebb5e78c ("MIPS: Initial implementation of a VDSO") Reported-by:
Jason A. Donenfeld <Jason@zx2c4.com> Reviewed-by:
-
Stefan Mavrodiev authored
commit 57177d21 upstream. When the HDMI unbinds drm_connector_cleanup() and drm_encoder_cleanup() are called. This also happens when the connector and the encoder are destroyed. This double call triggers a NULL pointer exception. The patch fixes this by removing the cleanup calls in the unbind function. Cc: <stable@vger.kernel.org> Fixes: 9c568101 ("drm/sun4i: Add HDMI support") Signed-off-by:
Stefan Mavrodiev <stefan@olimex.com> Signed-off-by:
Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20191217124632.20820-1-stefan@olimex.comSigned-off-by:
-
Kailang Yang authored
commit 66c5d718 upstream. Chrome machine had humming noise from external speaker plugin at codec D3 state. Signed-off-by:
Kailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/2692449396954c6c968f5b75e2660358@realtek.comSigned-off-by:
-
Hui Wang authored
commit 92adc96f upstream. Recently we found the headset-mic on the Dell Dock WD19 doesn't work anymore after s3 (s2i or deep), this problem could be workarounded by closing (pcm_close) the app and then reopening (pcm_open) the app, so this bug is not easy to be detected by users. When problem happens, retire_capture_urb() could still be called periodically, but the size of captured data is always 0, it could be a firmware bug on the dock. Anyway I found after resuming, the snd_usb_pcm_prepare() will be called, and if we forcibly run set_format() to set the interface and its endpoint, the capture size will be normal again. This problem and workaound also apply to playback. To fix it in the kernel, add a quirk to let set_format() run forcibly once after resume. Signed-off-by:
Hui Wang <hui.wang@canonical.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191218132650.6303-1-hui.wang@canonical.comSigned-off-by:
-
Johan Hovold authored
commit 0141254b upstream. Make sure to check the return value of usb_altnum_to_altsetting() to avoid dereferencing a NULL pointer when the requested alternate settings is missing. The format altsetting number may come from a quirk table and there does not seem to be any other validation of it (the corresponding index is checked however). Fixes: b099b969 ("ALSA: usb-audio: Avoid superfluous usb_set_interface() calls") Cc: stable <stable@vger.kernel.org> # 4.18 Signed-off-by:
Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20191220093134.1248-1-johan@kernel.orgSigned-off-by:
-
Takashi Iwai authored
commit 0aec96f5 upstream. Jia-Ju Bai reported a possible sleep-in-atomic scenario in the ice1724 driver with Infrasonic Quartet support code: namely, ice->set_rate callback gets called inside ice->reg_lock spinlock, while the callback in quartet.c holds ice->gpio_mutex. This patch fixes the invalid call: it simply moves the calls of ice->set_rate and ice->set_mclk callbacks outside the spinlock. Reported-by:
-
Phil Sutter authored
[ Upstream commit 8cb4ec44 ] On Big Endian architectures, u16 port value was extracted from the wrong parts of u32 sreg_port, just like commit 10596608 ("netfilter: nf_tables: fix mismatch in big-endian system") describes. Fixes: 4ed8eb65 ("netfilter: nf_tables: Add native tproxy support") Signed-off-by:
Phil Sutter <phil@nwl.cc> Acked-by:
Florian Westphal <fw@strlen.de> Acked-by:
Máté Eckl <ecklm94@gmail.com> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Daniel Vetter authored
[ Upstream commit 5bf8bec3 ] The hardened usercpy code is too paranoid ever since commit 6a30afa8c1fb ("uaccess: disallow > INT_MAX copy sizes") Code itself should have been fine as-is. Link: http://lkml.kernel.org/r/20191106164755.31478-1-daniel.vetter@ffwll.chSigned-off-by:
Daniel Vetter <daniel.vetter@intel.com> Reported-by: syzbot+fb77e97ebf0612ee6914@syzkaller.appspotmail.com Fixes: 6a30afa8c1fb ("uaccess: disallow > INT_MAX copy sizes") Cc: Kees Cook <keescook@chromium.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
Christian Brauner authored
[ Upstream commit 0b8d616f ] When assiging and testing taskstats in taskstats_exit() there's a race when setting up and reading sig->stats when a thread-group with more than one thread exits: write to 0xffff8881157bbe10 of 8 bytes by task 7951 on cpu 0: taskstats_tgid_alloc kernel/taskstats.c:567 [inline] taskstats_exit+0x6b7/0x717 kernel/taskstats.c:596 do_exit+0x2c2/0x18e0 kernel/exit.c:864 do_group_exit+0xb4/0x1c0 kernel/exit.c:983 get_signal+0x2a2/0x1320 kernel/signal.c:2734 do_signal+0x3b/0xc00 arch/x86/kernel/signal.c:815 exit_to_usermode_loop+0x250/0x2c0 arch/x86/entry/common.c:159 prepare_exit_to_usermode arch/x86/entry/common.c:194 [inline] syscall_return_slowpath arch/x86/entry/common.c:274 [inline] do_syscall_64+0x2d7/0x2f0 arch/x86/entry/common.c:299 entry_SYSCALL_64_after_hwframe+0x44/0xa9 read to 0xffff8881157bbe10 of 8 bytes by task 7949 on cpu 1: taskstats_tgid_alloc kernel/taskstats.c:559 [inline] taskstats_exit+0xb2/0x717 kernel/taskstats.c:596 do_exit+0x2c2/0x18e0 kernel/exit.c:864 do_group_exit+0xb4/0x1c0 kernel/exit.c:983 __do_sys_exit_group kernel/exit.c:994 [inline] __se_sys_exit_group kernel/exit.c:992 [inline] __x64_sys_exit_group+0x2e/0x30 kernel/exit.c:992 do_syscall_64+0xcf/0x2f0 arch/x86/entry/common.c:296 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fix this by using smp_load_acquire() and smp_store_release(). Reported-by: syzbot+c5d03165a1bd1dead0c1@syzkaller.appspotmail.com Fixes: 34ec1234 ("taskstats: cleanup ->signal->stats allocation") Cc: stable@vger.kernel.org Signed-off-by:
Christian Brauner <christian.brauner@ubuntu.com> Acked-by:
Marco Elver <elver@google.com> Reviewed-by:
Will Deacon <will@kernel.org> Reviewed-by:
Andrea Parri <parri.andrea@gmail.com> Reviewed-by:
Dmitry Vyukov <dvyukov@google.com> Link: https://lore.kernel.org/r/20191009114809.8643-1-christian.brauner@ubuntu.comSigned-off-by:
-
Brian Foster authored
[ Upstream commit 798a9cad ] syzbot (via KASAN) reports a use-after-free in the error path of xlog_alloc_log(). Specifically, the iclog freeing loop doesn't handle the case of a fully initialized ->l_iclog linked list. Instead, it assumes that the list is partially constructed and NULL terminated. This bug manifested because there was no possible error scenario after iclog list setup when the original code was added. Subsequent code and associated error conditions were added some time later, while the original error handling code was never updated. Fix up the error loop to terminate either on a NULL iclog or reaching the end of the list. Reported-by: syzbot+c732f8644185de340492@syzkaller.appspotmail.com Signed-off-by:
Brian Foster <bfoster@redhat.com> Reviewed-by:
Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by:
-
Jaroslav Kysela authored
[ Upstream commit d2cd795c ] The auto-parser assigns the bass speaker to DAC3 (NID 0x06) which is without the volume control. I do not see a reason to use DAC2, because the shared output to all speakers produces the sufficient and well balanced sound. The stereo support is enough for this purpose (laptop). Signed-off-by:
Jaroslav Kysela <perex@perex.cz> Link: https://lore.kernel.org/r/20191129144027.14765-1-perex@perex.czSigned-off-by:
-
Chris Chiu authored
[ Upstream commit 48e01504 ] ASUS reported that there's an bass speaker in addition to internal speaker and it uses DAC 0x02. It was not enabled in the commit 436e2550 ("ALSA: hda/realtek - Enable internal speaker of ASUS UX431FLC") which only enables the amplifier and the front speaker. This commit enables the bass speaker on top of the aforementioned work to improve the acoustic experience. Fixes: 436e2550 ("ALSA: hda/realtek - Enable internal speaker of ASUS UX431FLC") Signed-off-by:
Chris Chiu <chiu@endlessm.com> Signed-off-by:
Jian-Hong Pan <jian-hong@endlessm.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191230031118.95076-1-chiu@endlessm.comSigned-off-by:
-
Kailang Yang authored
[ Upstream commit e79c2269 ] Dell has new platform which has dual speaker connecting. They want dual speaker which use same dac for output. Signed-off-by:
-
