Biao Huang says:

====================
stmmac: dwmac-mediatek: fix clock issue

changes in v5:
1. add reivewd-by as Matthias's comments.
2. fix "warning: unused variable 'ret' [-Wunused-variable]" as Jakub's comments

changes in v4:
1. improve commit message and test ko insertion/remove as Matthias's comments.
2. add patch "net: stmmac: fix pm runtime issue in stmmac_dvr_remove()" to
   fix vlan filter deletion issue.
3. add patch "net: stmmac: fix unbalanced ptp clock issue in suspend/resume flow"
   to fix unbalanced ptp clock issue in suspend/resume flow.

changes in v3:
1. delete mediatek_dwmac_exit() since there is no operation in it,
as Matthias's comments.

changes in v2:
1. clock configuration is still needed in probe,
and invoke mediatek_dwmac_clks_config() instead.
2. update commit message.

v1:
remove duplicated clock configuration in init/exit.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Current stmmac driver will prepare/enable ptp_ref clock in
stmmac_init_tstamp_counter().

The stmmac_pltfr_noirq_suspend will disable it once in suspend flow.

But in resume flow,
	stmmac_pltfr_noirq_resume --> stmmac_init_tstamp_counter
	stmmac_resume --> stmmac_hw_setup --> stmmac_init_ptp --> stmmac_init_tstamp_counter
ptp_ref clock reference counter increases twice, which leads to unbalance
ptp clock when resume back.

Move ptp_ref clock prepare/enable out of stmmac_init_tstamp_counter to fix it.

Fixes: 0735e639 ("net: stmmac: skip only stmmac_ptp_register when resume from suspend")
Signed-off-by: Biao Huang <biao.huang@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If netif is running when stmmac_dvr_remove is invoked,
the unregister_netdev will call ndo_stop(stmmac_release) and
vlan_kill_rx_filter(stmmac_vlan_rx_kill_vid).

Currently, stmmac_dvr_remove() will disable pm runtime before
unregister_netdev. When stmmac_vlan_rx_kill_vid is invoked,
pm_runtime_resume_and_get in it returns EACCESS error number,
and reports:

	dwmac-mediatek 11021000.ethernet eth0: stmmac_dvr_remove: removing driver
	dwmac-mediatek 11021000.ethernet eth0: FPE workqueue stop
	dwmac-mediatek 11021000.ethernet eth0: failed to kill vid 0081/0

Move the pm_runtime_disable to the end of stmmac_dvr_remove
to fix this issue.

Fixes: 64495203 ("net: stmmac: properly handle with runtime pm in stmmac_dvr_remove()")
Signed-off-by: Biao Huang <biao.huang@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The pm_runtime takes care of the clock handling in current
stmmac drivers, and dwmac-mediatek implement the
mediatek_dwmac_clks_config() as the callback for pm_runtime.

Then, stripping duplicated clocks handling in old init()/exit()
to fix clock issue in suspend/resume test.

As to clocks in probe/remove, vendor need symmetric handling to
ensure clocks balance.

Test pass, including suspend/resume and ko insertion/remove.

Fixes: 3186bdad ("stmmac: dwmac-mediatek: add platform level clocks management")
Signed-off-by: Biao Huang <biao.huang@mediatek.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Kuniyuki Iwashima says:

====================
sysctl: Fix data-races around ipv4_net_table (Round 2).

This series fixes data-races around 15 knobs after ip_default_ttl in
ipv4_net_table.

These two knobs are skipped.
  - ip_local_port_range is safe with its own lock.
  - ip_local_reserved_ports uses proc_do_large_bitmap(), which will need
    an additional lock and can be fixed later.

So, the next round will start with igmp_link_local_mcast_reports.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

While reading sysctl_tcp_probe_interval, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its reader.

Fixes: 05cbc0db ("ipv4: Create probe timer for tcp PMTU as per RFC4821")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

While reading sysctl_tcp_probe_threshold, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its reader.

Fixes: 6b58e0a5 ("ipv4: Use binary search to choose tcp PMTU probe_size")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

While reading sysctl_tcp_mtu_probe_floor, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its reader.

Fixes: c04b79b6 ("tcp: add new tcp_mtu_probe_floor sysctl")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

While reading sysctl_tcp_min_snd_mss, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its readers.

Fixes: 5f3e2bf0 ("tcp: add tcp_min_snd_mss sysctl")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

While reading sysctl_tcp_base_mss, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its readers.

Fixes: 5d424d5a ("[TCP]: MTU probing")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

While reading sysctl_tcp_mtu_probing, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its readers.

Fixes: 5d424d5a ("[TCP]: MTU probing")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

While reading sysctl_tcp_l3mdev_accept, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its readers.

Fixes: 6dd9a14e ("net: Allow accepted sockets to be bound to l3mdev domain")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

While reading sysctl_tcp_fwmark_accept, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its reader.

Fixes: 84f39b08 ("net: support marking accepting TCP sockets")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

While reading sysctl_fwmark_reflect, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its reader.

Fixes: e110861f ("net: add a sysctl to reflect the fwmark on replies")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

While reading sysctl_ip_autobind_reuse, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its reader.

Fixes: 4b01a967 ("tcp: bind(0) remove the SO_REUSEADDR restriction when ephemeral ports are exhausted.")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

While reading sysctl_ip_nonlocal_bind, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its readers.

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

While reading sysctl_ip_fwd_update_priority, it can be changed
concurrently.  Thus, we need to add READ_ONCE() to its readers.

Fixes: 432e05d3 ("net: ipv4: Control SKB reprioritization after forwarding")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

While reading sysctl_ip_fwd_use_pmtu, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its readers.

Fixes: f87c10a8 ("ipv4: introduce ip_dst_mtu_maybe_forward and protect forwarding path against pmtu spoofing")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

While reading sysctl_ip_no_pmtu_disc, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its readers.

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

While reading sysctl_ip_default_ttl, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its readers.

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Clang warns:

  arch/x86/kernel/cpu/bugs.c:58:21: error: section attribute is specified on redeclared variable [-Werror,-Wsection]
  DEFINE_PER_CPU(u64, x86_spec_ctrl_current);
                      ^
  arch/x86/include/asm/nospec-branch.h:283:12: note: previous declaration is here
  extern u64 x86_spec_ctrl_current;
             ^
  1 error generated.

The declaration should be using DECLARE_PER_CPU instead so all
attributes stay in sync.

Cc: stable@vger.kernel.org
Fixes: fc02735b ("KVM: VMX: Prevent guest RSB poisoning attacks with eIBRS")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull networking fixes from Jakub Kicinski:
 "Including fixes from netfilter, bpf and wireless.

  Still no major regressions, the release continues to be calm. An
  uptick of fixes this time around due to trivial data race fixes and
  patches flowing down from subtrees.

  There has been a few driver fixes (particularly a few fixes for false
  positives due to 66e4c8d9 which went into -next in May!) that make
  me worry the wide testing is not exactly fully through.

  So "calm" but not "let's just cut the final ASAP" vibes over here.

  Current release - regressions:

   - wifi: rtw88: fix write to const table of channel parameters

  Current release - new code bugs:

   - mac80211: add gfp_t arg to ieeee80211_obss_color_collision_notify

   - mlx5:
      - TC, allow offload from uplink to other PF's VF
      - Lag, decouple FDB selection and shared FDB
      - Lag, correct get the port select mode str

   - bnxt_en: fix and simplify XDP transmit path

   - r8152: fix accessing unset transport header

  Previous releases - regressions:

   - conntrack: fix crash due to confirmed bit load reordering (after
     atomic -> refcount conversion)

   - stmmac: dwc-qos: disable split header for Tegra194

  Previous releases - always broken:

   - mlx5e: ring the TX doorbell on DMA errors

   - bpf: make sure mac_header was set before using it

   - mac80211: do not wake queues on a vif that is being stopped

   - mac80211: fix queue selection for mesh/OCB interfaces

   - ip: fix dflt addr selection for connected nexthop

   - seg6: fix skb checksums for SRH encapsulation/insertion

   - xdp: fix spurious packet loss in generic XDP TX path

   - bunch of sysctl data race fixes

   - nf_log: incorrect offset to network header

  Misc:

   - bpf: add flags arg to bpf_dynptr_read and bpf_dynptr_write APIs"

* tag 'net-5.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (87 commits)
  nfp: flower: configure tunnel neighbour on cmsg rx
  net/tls: Check for errors in tls_device_init
  MAINTAINERS: Add an additional maintainer to the AMD XGBE driver
  xen/netback: avoid entering xenvif_rx_next_skb() with an empty rx queue
  selftests/net: test nexthop without gw
  ip: fix dflt addr selection for connected nexthop
  net: atlantic: remove aq_nic_deinit() when resume
  net: atlantic: remove deep parameter on suspend/resume functions
  sfc: fix kernel panic when creating VF
  seg6: bpf: fix skb checksum in bpf_push_seg6_encap()
  seg6: fix skb checksum in SRv6 End.B6 and End.B6.Encaps behaviors
  seg6: fix skb checksum evaluation in SRH encapsulation/insertion
  sfc: fix use after free when disabling sriov
  net: sunhme: output link status with a single print.
  r8152: fix accessing unset transport header
  net: stmmac: fix leaks in probe
  net: ftgmac100: Hold reference returned by of_get_child_by_name()
  nexthop: Fix data-races around nexthop_compat_mode.
  ipv4: Fix data-races around sysctl_ip_dynaddr.
  tcp: Fix a data-race around sysctl_tcp_ecn_fallback.
  ...

Pull cifs fixes from Steve French:
 "Three smb3 client fixes:

   - two multichannel fixes: fix a potential deadlock freeing a channel,
     and fix a race condition on failed creation of a new channel

   - mount failure fix: work around a server bug in some common older
     Samba servers by avoiding padding at the end of the negotiate
     protocol request"

* tag '5.19-rc6-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  smb3: workaround negprot bug in some Samba servers
  cifs: remove unnecessary locking of chan_lock while freeing session
  cifs: fix race condition with delayed threads

Pull nfsd fixes from Chuck Lever:
 "Notable regression fixes:

   - Enable SETATTR(time_create) to fix regression with Mac OS clients

   - Fix a lockd crasher and broken NLM UNLCK behavior"

* tag 'nfsd-5.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
  lockd: fix nlm_close_files
  lockd: set fl_owner when unlocking files
  NFSD: Decode NFSv4 birth time attribute

Merge tag 'integrity-v5.19-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity

Pull integrity fixes from Mimi Zohar:
 "Here are a number of fixes for recently found bugs.

  Only 'ima: fix violation measurement list record' was introduced in
  the current release. The rest address existing bugs"

* tag 'integrity-v5.19-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
  ima: Fix potential memory leak in ima_init_crypto()
  ima: force signature verification when CONFIG_KEXEC_SIG is configured
  ima: Fix a potential integer overflow in ima_appraise_measurement
  ima: fix violation measurement list record
  Revert "evm: Fix memleak in init_desc"

Pull ARM fixes from Russell King:

 - quieten the spectre-bhb prints

 - mark flattened device tree sections as shareable

 - remove some obsolete CPU domain code and help text

 - fix thumb unaligned access abort emulation

 - fix amba_device_add() refcount underflow

 - fix literal placement

* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: 9208/1: entry: add .ltorg directive to keep literals in range
  ARM: 9207/1: amba: fix refcount underflow if amba_device_add() fails
  ARM: 9214/1: alignment: advance IT state after emulating Thumb instruction
  ARM: 9213/1: Print message about disabled Spectre workarounds only once
  ARM: 9212/1: domain: Modify Kconfig help text
  ARM: 9211/1: domain: drop modify_domain()
  ARM: 9210/1: Mark the FDT_FIXED sections as shareable
  ARM: 9209/1: Spectre-BHB: avoid pr_info() every time a CPU comes out of idle

The UML function names to_virt() and to_phys() are exposed by UML
headers, and are very generic and may be defined by drivers.  As it
turns out, commit 9409c9b6 ("pmem: refactor pmem_clear_poison()")
did exactly that.

This results in build errors such as the following when trying to build
um:allmodconfig:

  drivers/nvdimm/pmem.c: In function ‘pmem_dax_zero_page_range’:
  ./arch/um/include/asm/page.h:105:20: error: too few arguments to function ‘to_phys’
    105 | #define __pa(virt) to_phys((void *) (unsigned long) (virt))
        |                    ^~~~~~~

Use less generic function names for the um specific to_phys() and
to_virt() functions to fix the problem and to avoid similar problems in
the future.

Fixes: 9409c9b6 ("pmem: refactor pmem_clear_poison()")
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull sound fixes from Takashi Iwai:
 "Hopefully the last one for 5.19. This became bigger than wished, but
  all changes are pretty device-specific small fixes, which look less
  worrisome.

  The majority of changes are about various ASoC fixes, while the usual
  HD-audio quirks are included as well"

* tag 'sound-5.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (28 commits)
  ALSA: hda/realtek - Enable the headset-mic on a Xiaomi's laptop
  ALSA: hda/realtek - Fix headset mic problem for a HP machine with alc221
  ALSA: hda/realtek: fix mute/micmute LEDs for HP machines
  ALSA: hda/realtek - Fix headset mic problem for a HP machine with alc671
  ALSA: hda - Add fixup for Dell Latitidue E5430
  ALSA: hda/conexant: Apply quirk for another HP ProDesk 600 G3 model
  ALSA: hda/realtek: Fix headset mic for Acer SF313-51
  ASoC: Intel: Skylake: Correct the handling of fmt_config flexible array
  ASoC: Intel: Skylake: Correct the ssp rate discovery in skl_get_ssp_clks()
  ASoC: rt5640: Fix the wrong state of JD1 and JD2
  ASoC: Intel: sof_rt5682: fix out-of-bounds array access
  ASoC: qdsp6: fix potential memory leak in q6apm_get_audioreach_graph()
  ASoC: tas2764: Fix amp gain register offset & default
  ASoC: tas2764: Correct playback volume range
  ASoC: tas2764: Fix and extend FSYNC polarity handling
  ASoC: tas2764: Add post reset delays
  ASoC: dt-bindings: Fix description for msm8916
  ASoC: doc: Capitalize RESET line name
  ASoC: arizona: Update arizona_aif_cfg_changed to use RX_BCLK_RATE
  ASoC: cs47l92: Fix event generation for OUT1 demux
  ...

nfp_tun_write_neigh() function will configure a tunnel neighbour when
calling nfp_tun_neigh_event_handler() or nfp_flower_cmsg_process_one_rx()
(with no tunnel neighbour type) from firmware.

When configuring IP on physical port as a tunnel endpoint, no operation
will be performed after receiving the cmsg mentioned above.

Therefore, add a progress to configure tunnel neighbour in this case.

v2: Correct format of fixes tag.

Fixes: f1df7956 ("nfp: flower: rework tunnel neighbour configuration")
Signed-off-by: Tianyu Yuan <tianyu.yuan@corigine.com>
Reviewed-by: Louis Peens <louis.peens@corigine.com>
Reviewed-by: Baowen Zheng <baowen.zheng@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20220714081915.148378-1-simon.horman@corigine.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Add missing error checks in tls_device_init.

Fixes: e8f69799 ("net/tls: Add generic NIC offload infrastructure")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20220714070754.1428-1-tariqt@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Add Shyam Sundar S K as an additional maintainer to support the AMD XGBE
network device driver.

Cc: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/db367f24089c2bbbcd1cec8e21af49922017a110.1657751501.git.thomas.lendacky@amd.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

xenvif_rx_next_skb() is expecting the rx queue not being empty, but
in case the loop in xenvif_rx_action() is doing multiple iterations,
the availability of another skb in the rx queue is not being checked.

This can lead to crashes:

[40072.537261] BUG: unable to handle kernel NULL pointer dereference at 0000000000000080
[40072.537407] IP: xenvif_rx_skb+0x23/0x590 [xen_netback]
[40072.537534] PGD 0 P4D 0
[40072.537644] Oops: 0000 [#1] SMP NOPTI
[40072.537749] CPU: 0 PID: 12505 Comm: v1-c40247-q2-gu Not tainted 4.12.14-122.121-default #1 SLE12-SP5
[40072.537867] Hardware name: HP ProLiant DL580 Gen9/ProLiant DL580 Gen9, BIOS U17 11/23/2021
[40072.537999] task: ffff880433b38100 task.stack: ffffc90043d40000
[40072.538112] RIP: e030:xenvif_rx_skb+0x23/0x590 [xen_netback]
[40072.538217] RSP: e02b:ffffc90043d43de0 EFLAGS: 00010246
[40072.538319] RAX: 0000000000000000 RBX: ffffc90043cd7cd0 RCX: 00000000000000f7
[40072.538430] RDX: 0000000000000000 RSI: 0000000000000006 RDI: ffffc90043d43df8
[40072.538531] RBP: 000000000000003f R08: 000077ff80000000 R09: 0000000000000008
[40072.538644] R10: 0000000000007ff0 R11: 00000000000008f6 R12: ffffc90043ce2708
[40072.538745] R13: 0000000000000000 R14: ffffc90043d43ed0 R15: ffff88043ea748c0
[40072.538861] FS: 0000000000000000(0000) GS:ffff880484600000(0000) knlGS:0000000000000000
[40072.538988] CS: e033 DS: 0000 ES: 0000 CR0: 0000000080050033
[40072.539088] CR2: 0000000000000080 CR3: 0000000407ac8000 CR4: 0000000000040660
[40072.539211] Call Trace:
[40072.539319] xenvif_rx_action+0x71/0x90 [xen_netback]
[40072.539429] xenvif_kthread_guest_rx+0x14a/0x29c [xen_netback]

Fix that by stopping the loop in case the rx queue becomes empty.

Cc: stable@vger.kernel.org
Fixes: 98f6d57c ("xen-netback: process guest rx packets in batches")
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Link: https://lore.kernel.org/r/20220713135322.19616-1-jgross@suse.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The DRM_AMD_DC_DCN display engine support (Raven, Navi, and newer) has
not been building cleanly on powerpc and causes link errors due to
mixing hard- and soft-float object files:

  powerpc64-linux-ld: drivers/gpu/drm/amd/amdgpu/../display/dc/dml/display_mode_lib.o uses hard float, drivers/gpu/drm/amd/amdgpu/../display/dc/dcn31/dcn31_resource.o uses soft float
  powerpc64-linux-ld: failed to merge target specific data of file drivers/gpu/drm/amd/amdgpu/../display/dc/dcn31/dcn31_resource.o
  [..]

and while patches are floating around, it's not exactly obvious what is
going on.

The problem bisects to commit 41b7a347 ("powerpc: Book3S 64-bit
outline-only KASAN support") but that is probably more about changing
config variables than the fundamental cause.

Despite the bisection result, a more directly related commit seems to be
26f4712a ("drm/amd/display: move FPU related code from dcn31 to
dml/dcn31 folder").  It's probably a combination of the two.

This has been going on since the merge window, without any final word.
So instead of blindly applying patches that may or may not be the right
thing, let's disable this for now.

As Michael Ellerman says:
 "IIUIC this code was never enabled on ppc before, so disabling it seems
  like a reasonable fix to get the build clean"

and once we have more actual feedback (and find any potential users) we
can always re-enable it with the patch that fixes the issues and
back-port as necessary.

Fixes: 41b7a347 ("powerpc: Book3S 64-bit outline-only KASAN support")
Fixes: 26f4712a ("drm/amd/display: move FPU related code from dcn31 to dml/dcn31 folder")
Reported-and-tested-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/all/20220606153910.GA1773067@roeck-us.net/
Link: https://lore.kernel.org/all/20220618232737.2036722-1-linux@roeck-us.net/
Link: https://lore.kernel.org/all/20220713050724.GA2471738@roeck-us.net/Acked-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This test implement the scenario described in the commit
"ip: fix dflt addr selection for connected nexthop".
The test configures a nexthop object with an output device only (no gateway
address) and a route that uses this nexthop. The goal is to check if the
kernel selects a valid source address.

Link: https://lore.kernel.org/netdev/20220712095545.10947-1-nicolas.dichtel@6wind.com/Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/20220713114853.29406-2-nicolas.dichtel@6wind.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

When a nexthop is added, without a gw address, the default scope was set
to 'host'. Thus, when a source address is selected, 127.0.0.1 may be chosen
but rejected when the route is used.

When using a route without a nexthop id, the scope can be configured in the
route, thus the problem doesn't exist.

To explain more deeply: when a user creates a nexthop, it cannot specify
the scope. To create it, the function nh_create_ipv4() calls fib_check_nh()
with scope set to 0. fib_check_nh() calls fib_check_nh_nongw() wich was
setting scope to 'host'. Then, nh_create_ipv4() calls
fib_info_update_nhc_saddr() with scope set to 'host'. The src addr is
chosen before the route is inserted.

When a 'standard' route (ie without a reference to a nexthop) is added,
fib_create_info() calls fib_info_update_nhc_saddr() with the scope set by
the user. iproute2 set the scope to 'link' by default.

Here is a way to reproduce the problem:
ip netns add foo
ip -n foo link set lo up
ip netns add bar
ip -n bar link set lo up
sleep 1

ip -n foo link add name eth0 type dummy
ip -n foo link set eth0 up
ip -n foo address add 192.168.0.1/24 dev eth0

ip -n foo link add name veth0 type veth peer name veth1 netns bar
ip -n foo link set veth0 up
ip -n bar link set veth1 up

ip -n bar address add 192.168.1.1/32 dev veth1
ip -n bar route add default dev veth1

ip -n foo nexthop add id 1 dev veth0
ip -n foo route add 192.168.1.1 nhid 1

Try to get/use the route:
> $ ip -n foo route get 192.168.1.1
> RTNETLINK answers: Invalid argument
> $ ip netns exec foo ping -c1 192.168.1.1
> ping: connect: Invalid argument

Try without nexthop group (iproute2 sets scope to 'link' by dflt):
ip -n foo route del 192.168.1.1
ip -n foo route add 192.168.1.1 dev veth0

Try to get/use the route:
> $ ip -n foo route get 192.168.1.1
> 192.168.1.1 dev veth0 src 192.168.0.1 uid 0
>     cache
> $ ip netns exec foo ping -c1 192.168.1.1
> PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data.
> 64 bytes from 192.168.1.1: icmp_seq=1 ttl=64 time=0.039 ms
>
> --- 192.168.1.1 ping statistics ---
> 1 packets transmitted, 1 received, 0% packet loss, time 0ms
> rtt min/avg/max/mdev = 0.039/0.039/0.039/0.000 ms

CC: stable@vger.kernel.org
Fixes: 597cfe4f ("nexthop: Add support for IPv4 nexthops")
Reported-by: Edwin Brossette <edwin.brossette@6wind.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/20220713114853.29406-1-nicolas.dichtel@6wind.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

LKP reports a build issue on Clang, related to a literal load of
__current issued through the ldr_va macro. This turns out to be due to
the fact that group relocations are disabled when CONFIG_COMPILE_TEST=y,
which means that the ldr_va macro resolves to a pair of LDR
instructions, the first one being a literal load issued too far from its
literal pool.

Due to the introduction of a couple of new uses of this macro in commit
50807460 ("ARM: 9195/1: entry: avoid explicit literal loads"),
the literal pools end up getting rearranged in a way that causes the
literal for __current to go out of range. Let's fix this up by putting a
.ltorg directive in a suitable place in the code.

Link: https://lore.kernel.org/all/202205290805.1vZLAr36-lkp@intel.com/

Fixes: 50807460 ("ARM: 9195/1: entry: avoid explicit literal loads")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>

"ARM: 9192/1: amba: fix memory leak in amba_device_try_add()" leads
to a refcount underflow if amba_device_add() fails, which called by
of_amba_device_create(), the of_amba_device_create() already exists
the error handling, so amba_put_device() only need to be added into
amba_deferred_retry().

Fixes: 7719a68b ("ARM: 9192/1: amba: fix memory leak in amba_device_try_add()")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>

aq_nic_deinit() has been called while suspending, so we don't have to call
it again on resume.
Actually, call it again leads to another hang issue when resuming from
S3.

Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992345] Call Trace:
Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992346] <TASK>
Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992348] aq_nic_deinit+0xb4/0xd0 [atlantic]
Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992356] aq_pm_thaw+0x7f/0x100 [atlantic]
Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992362] pci_pm_resume+0x5c/0x90
Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992366] ? pci_pm_thaw+0x80/0x80
Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992368] dpm_run_callback+0x4e/0x120
Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992371] device_resume+0xad/0x200
Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992373] async_resume+0x1e/0x40
Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992374] async_run_entry_fn+0x33/0x120
Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992377] process_one_work+0x220/0x3c0
Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992380] worker_thread+0x4d/0x3f0
Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992382] ? process_one_work+0x3c0/0x3c0
Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992384] kthread+0x12a/0x150
Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992386] ? set_kthread_struct+0x40/0x40
Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992387] ret_from_fork+0x22/0x30
Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992391] </TASK>
Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992392] ---[ end trace 1ec8c79604ed5e0d ]---
Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992394] PM: dpm_run_callback(): pci_pm_resume+0x0/0x90 returns -110
Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992397] atlantic 0000:02:00.0: PM: failed to resume async: error -110

Fixes: 1809c30b ("net: atlantic: always deep reset on pm op, fixing up my null deref regression")
Signed-off-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Link: https://lore.kernel.org/r/20220713111224.1535938-2-acelan.kao@canonical.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Below commit claims that atlantic NIC requires to reset the device on pm
op, and had set the deep to true for all suspend/resume functions.
commit 1809c30b ("net: atlantic: always deep reset on pm op, fixing up my null deref regression")
So, we could remove deep parameter on suspend/resume functions without
any functional change.

Fixes: 1809c30b ("net: atlantic: always deep reset on pm op, fixing up my null deref regression")
Signed-off-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Link: https://lore.kernel.org/r/20220713111224.1535938-1-acelan.kao@canonical.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

When creating VFs a kernel panic can happen when calling to
efx_ef10_try_update_nic_stats_vf.

When releasing a DMA coherent buffer, sometimes, I don't know in what
specific circumstances, it has to unmap memory with vunmap. It is
disallowed to do that in IRQ context or with BH disabled. Otherwise, we
hit this line in vunmap, causing the crash:
  BUG_ON(in_interrupt());

This patch reenables BH to release the buffer.

Log messages when the bug is hit:
 kernel BUG at mm/vmalloc.c:2727!
 invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
 CPU: 6 PID: 1462 Comm: NetworkManager Kdump: loaded Tainted: G          I      --------- ---  5.14.0-119.el9.x86_64 #1
 Hardware name: Dell Inc. PowerEdge R740/06WXJT, BIOS 2.8.2 08/27/2020
 RIP: 0010:vunmap+0x2e/0x30
 ...skip...
 Call Trace:
  __iommu_dma_free+0x96/0x100
  efx_nic_free_buffer+0x2b/0x40 [sfc]
  efx_ef10_try_update_nic_stats_vf+0x14a/0x1c0 [sfc]
  efx_ef10_update_stats_vf+0x18/0x40 [sfc]
  efx_start_all+0x15e/0x1d0 [sfc]
  efx_net_open+0x5a/0xe0 [sfc]
  __dev_open+0xe7/0x1a0
  __dev_change_flags+0x1d7/0x240
  dev_change_flags+0x21/0x60
  ...skip...

Fixes: d7788196 ("sfc: DMA the VF stats only when requested")
Reported-by: Ma Yuying <yuma@redhat.com>
Signed-off-by: Íñigo Huguet <ihuguet@redhat.com>
Acked-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://lore.kernel.org/r/20220713092116.21238-1-ihuguet@redhat.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>