The Meson GX MMC driver fails to build after commit 23c35f48
("pinctrl: remove include file from <linux/device.h>") because it relies
on the pinctrl/consumer.h being pulled in by the device.h header
implicitly.

Include the header explicitly to avoid the build failure.

Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The Rockchip LVDS driver fails to build after commit 23c35f48
("pinctrl: remove include file from <linux/device.h>") because it relies
on the pinctrl/consumer.h and pinctrl/devinfo.h being pulled in by the
device.h header implicitly.

Include these headers explicitly to avoid the build failure.

Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fixes: 23c35f48 ("pinctrl: remove include file from <linux/device.h>")
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull spectre/meltdown updates from Thomas Gleixner:
 "The next round of updates related to melted spectrum:

   - The initial set of spectre V1 mitigations:

       - Array index speculation blocker and its usage for syscall,
         fdtable and the n180211 driver.

       - Speculation barrier and its usage in user access functions

   - Make indirect calls in KVM speculation safe

   - Blacklisting of known to be broken microcodes so IPBP/IBSR are not
     touched.

   - The initial IBPB support and its usage in context switch

   - The exposure of the new speculation MSRs to KVM guests.

   - A fix for a regression in x86/32 related to the cpu entry area

   - Proper whitelisting for known to be safe CPUs from the mitigations.

   - objtool fixes to deal proper with retpolines and alternatives

   - Exclude __init functions from retpolines which speeds up the boot
     process.

   - Removal of the syscall64 fast path and related cleanups and
     simplifications

   - Removal of the unpatched paravirt mode which is yet another source
     of indirect unproteced calls.

   - A new and undisputed version of the module mismatch warning

   - A couple of cleanup and correctness fixes all over the place

  Yet another step towards full mitigation. There are a few things still
  missing like the RBS underflow mitigation for Skylake and other small
  details, but that's being worked on.

  That said, I'm taking a belated christmas vacation for a week and hope
  that everything is magically solved when I'm back on Feb 12th"

* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (37 commits)
  KVM/SVM: Allow direct access to MSR_IA32_SPEC_CTRL
  KVM/VMX: Allow direct access to MSR_IA32_SPEC_CTRL
  KVM/VMX: Emulate MSR_IA32_ARCH_CAPABILITIES
  KVM/x86: Add IBPB support
  KVM/x86: Update the reverse_cpuid list to include CPUID_7_EDX
  x86/speculation: Fix typo IBRS_ATT, which should be IBRS_ALL
  x86/pti: Mark constant arrays as __initconst
  x86/spectre: Simplify spectre_v2 command line parsing
  x86/retpoline: Avoid retpolines for built-in __init functions
  x86/kvm: Update spectre-v1 mitigation
  KVM: VMX: make MSR bitmaps per-VCPU
  x86/paravirt: Remove 'noreplace-paravirt' cmdline option
  x86/speculation: Use Indirect Branch Prediction Barrier in context switch
  x86/cpuid: Fix up "virtual" IBRS/IBPB/STIBP feature bits on Intel
  x86/spectre: Fix spelling mistake: "vunerable"-> "vulnerable"
  x86/spectre: Report get_user mitigation for spectre_v1
  nl80211: Sanitize array index in parse_txq_params
  vfs, fdtable: Prevent bounds-check bypass via speculative execution
  x86/syscall: Sanitize syscall table de-references under speculation
  x86/get_user: Use pointer masking to limit speculation
  ...

Pull x86 fixes from Thomas Gleixner:
 "A small set of changes:

   - a fixup for kexec related to 5-level paging mode. That covers most
     of the cases except kexec from a 5-level kernel to a 4-level
     kernel. The latter needs more work and is going to come in 4.17

   - two trivial fixes for build warnings triggered by LTO and gcc-8"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/power: Fix swsusp_arch_resume prototype
  x86/dumpstack: Avoid uninitlized variable
  x86/kexec: Make kexec (mostly) work in 5-level paging mode

Pull irq fixes from Thomas Gleixner:
 "Two small changes:

   - a fix for a interrupt regression caused by the vector management
     changes in 4.15 affecting museum pieces which rely on interrupt
     probing for legacy (e.g. parallel port) devices.

     One of the startup calls in the autoprobe code was not changed to
     the new activate_and_startup() function resulting in a warning and
     as a consequence failing to discover the device interrupt.

   - a trivial update to the copyright/license header of the STM32 irq
     chip driver"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  genirq: Make legacy autoprobing work again
  irqchip/stm32: Fix copyright

Pull more block updates from Jens Axboe:
 "Most of this is fixes and not new code/features:

   - skd fix from Arnd, fixing a build error dependent on sla allocator
     type.

   - blk-mq scheduler discard merging fixes, one from me and one from
     Keith. This fixes a segment miscalculation for blk-mq-sched, where
     we mistakenly think two segments are physically contigious even
     though the request isn't carrying real data. Also fixes a bio-to-rq
     merge case.

   - Don't re-set a bit on the buffer_head flags, if it's already set.
     This can cause scalability concerns on bigger machines and
     workloads. From Kemi Wang.

   - Add BLK_STS_DEV_RESOURCE return value to blk-mq, allowing us to
     distuingish between a local (device related) resource starvation
     and a global one. The latter might happen without IO being in
     flight, so it has to be handled a bit differently. From Ming"

* tag 'for-linus-20180204' of git://git.kernel.dk/linux-block:
  block: skd: fix incorrect linux/slab_def.h inclusion
  buffer: Avoid setting buffer bits that are already set
  blk-mq-sched: Enable merging discard bio into request
  blk-mq: fix discard merge with scheduler attached
  blk-mq: introduce BLK_STS_DEV_RESOURCE

Pull NTB updates from Jon Mason:
 "Bug fixes galore, removal of the ntb atom driver, and updates to the
  ntb tools and tests to support the multi-port interface"

* tag 'ntb-4.16' of git://github.com/jonmason/ntb: (37 commits)
  NTB: ntb_perf: fix cast to restricted __le32
  ntb_perf: Fix an error code in perf_copy_chunk()
  ntb_hw_switchtec: Make function switchtec_ntb_remove() static
  NTB: ntb_tool: fix memory leak on 'buf' on error exit path
  NTB: ntb_perf: fix printing of resource_size_t
  NTB: ntb_hw_idt: Set NTB_TOPO_SWITCH topology
  NTB: ntb_test: Update ntb_perf tests
  NTB: ntb_test: Update ntb_tool MW tests
  NTB: ntb_test: Add ntb_tool Message tests
  NTB: ntb_test: Update ntb_tool Scratchpad tests
  NTB: ntb_test: Update ntb_tool DB tests
  NTB: ntb_test: Update ntb_tool link tests
  NTB: ntb_test: Add ntb_tool port tests
  NTB: ntb_test: Safely use paths with whitespace
  NTB: ntb_perf: Add full multi-port NTB API support
  NTB: ntb_tool: Add full multi-port NTB API support
  NTB: ntb_pp: Add full multi-port NTB API support
  NTB: Fix UB/bug in ntb_mw_get_align()
  NTB: Set dma mask and dma coherent mask to NTB devices
  NTB: Rename NTB messaging API methods
  ...

Pull mailbox updates from Jassi Brar:
 "Misc driver changes only:

   - TI-MsgMgr: Fix print format for a printk

   - TI-MSgMgr: SPDX license switch for the driver

   - QCOM-IPC: Convert driver to use regmap

   - QCOM-IPC: Spawn sibling clock device from mailbox driver"

* tag 'mailbox-v4.16' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
  dt-bindings: mailbox: qcom: Document the APCS clock binding
  mailbox: qcom: Create APCS child device for clock controller
  mailbox: qcom: Convert APCS IPC driver to use regmap
  mailbox: ti-msgmgr: Use %zu for size_t print format
  mailbox: ti-msgmgr: Switch to SPDX Licensing

Pull i2c updates from Wolfram Sang:
 "I2C has the following changes for you:

   - new flag to mark DMA safe buffers in i2c_msg. Also, some
     infrastructure around it. And docs.

   - huge refactoring of the at24 driver led by the new maintainer
     Bartosz

   - update I2C bus recovery to send STOP after recovery

   - conversion from gpio to gpiod for I2C bus recovery

   - adding a fault-injector to the i2c-gpio driver

   - lots of small driver improvements, and bigger ones to
     i2c-sh_mobile"

* 'i2c/for-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (99 commits)
  i2c: mv64xxx: Add myself as maintainer for this driver
  i2c: mv64xxx: Fix clock resource by adding an optional bus clock
  i2c: mv64xxx: Remove useless test before clk_disable_unprepare
  i2c: mxs: use true and false for boolean values
  i2c: meson: update doc description to fix build warnings
  i2c: meson: add configurable divider factors
  dt-bindings: i2c: update documentation for the Meson-AXG
  i2c: imx-lpi2c: add runtime pm support
  i2c: rcar: fix some trivial typos in comments
  i2c: davinci: fix the cpufreq transition
  i2c: rk3x: add proper kerneldoc header
  i2c: rk3x: account for const type of of_device_id.data
  i2c: acorn: remove outdated path from file header
  i2c: acorn: add MODULE_LICENSE tag
  i2c: rcar: implement bus recovery
  i2c: send STOP after successful bus recovery
  i2c: ensure SDA is released in recovery if SDA is controllable
  i2c: add 'set_sda' to bus_recovery_info
  i2c: add identifier in declarations for i2c_bus_recovery
  i2c: make kerneldoc about bus recovery more precise
  ...

Pull fscrypt updates from Ted Ts'o:
 "Refactor support for encrypted symlinks to move common code to fscrypt"

Ted also points out about the merge:
 "This makes the f2fs symlink code use the fscrypt_encrypt_symlink()
  from the fscrypt tree. This will end up dropping the kzalloc() ->
  f2fs_kzalloc() change, which means the fscrypt-specific allocation
  won't get tested by f2fs's kmalloc error injection system; which is
  fine"

* tag 'fscrypt_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/fscrypt: (26 commits)
  fscrypt: fix build with pre-4.6 gcc versions
  fscrypt: remove 'ci' parameter from fscrypt_put_encryption_info()
  fscrypt: document symlink length restriction
  fscrypt: fix up fscrypt_fname_encrypted_size() for internal use
  fscrypt: define fscrypt_fname_alloc_buffer() to be for presented names
  fscrypt: calculate NUL-padding length in one place only
  fscrypt: move fscrypt_symlink_data to fscrypt_private.h
  fscrypt: remove fscrypt_fname_usr_to_disk()
  ubifs: switch to fscrypt_get_symlink()
  ubifs: switch to fscrypt ->symlink() helper functions
  ubifs: free the encrypted symlink target
  f2fs: switch to fscrypt_get_symlink()
  f2fs: switch to fscrypt ->symlink() helper functions
  ext4: switch to fscrypt_get_symlink()
  ext4: switch to fscrypt ->symlink() helper functions
  fscrypt: new helper function - fscrypt_get_symlink()
  fscrypt: new helper functions for ->symlink()
  fscrypt: trim down fscrypt.h includes
  fscrypt: move fscrypt_is_dot_dotdot() to fs/crypto/fname.c
  fscrypt: move fscrypt_valid_enc_modes() to fscrypt_private.h
  ...

Update the binding documentation for APCS to mention that the APCS
hardware block also expose a clock controller functionality.

The APCS clock controller is a mux and half-integer divider. It has the
main CPU PLL as an input and provides the clock for the application CPU.
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>

There is a clock controller functionality provided by the APCS hardware
block of msm8916 devices. The device-tree would represent an APCS node
with both mailbox and clock provider properties.
Create a platform child device for the clock controller functionality so
the driver can probe and use APCS as parent.
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>

This hardware block provides more functionalities that just IPC. Convert
it to regmap to allow other child platform devices to use the same regmap.
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>

Pull hardened usercopy whitelisting from Kees Cook:
 "Currently, hardened usercopy performs dynamic bounds checking on slab
  cache objects. This is good, but still leaves a lot of kernel memory
  available to be copied to/from userspace in the face of bugs.

  To further restrict what memory is available for copying, this creates
  a way to whitelist specific areas of a given slab cache object for
  copying to/from userspace, allowing much finer granularity of access
  control.

  Slab caches that are never exposed to userspace can declare no
  whitelist for their objects, thereby keeping them unavailable to
  userspace via dynamic copy operations. (Note, an implicit form of
  whitelisting is the use of constant sizes in usercopy operations and
  get_user()/put_user(); these bypass all hardened usercopy checks since
  these sizes cannot change at runtime.)

  This new check is WARN-by-default, so any mistakes can be found over
  the next several releases without breaking anyone's system.

  The series has roughly the following sections:
   - remove %p and improve reporting with offset
   - prepare infrastructure and whitelist kmalloc
   - update VFS subsystem with whitelists
   - update SCSI subsystem with whitelists
   - update network subsystem with whitelists
   - update process memory with whitelists
   - update per-architecture thread_struct with whitelists
   - update KVM with whitelists and fix ioctl bug
   - mark all other allocations as not whitelisted
   - update lkdtm for more sensible test overage"

* tag 'usercopy-v4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (38 commits)
  lkdtm: Update usercopy tests for whitelisting
  usercopy: Restrict non-usercopy caches to size 0
  kvm: x86: fix KVM_XEN_HVM_CONFIG ioctl
  kvm: whitelist struct kvm_vcpu_arch
  arm: Implement thread_struct whitelist for hardened usercopy
  arm64: Implement thread_struct whitelist for hardened usercopy
  x86: Implement thread_struct whitelist for hardened usercopy
  fork: Provide usercopy whitelisting for task_struct
  fork: Define usercopy region in thread_stack slab caches
  fork: Define usercopy region in mm_struct slab caches
  net: Restrict unwhitelisted proto caches to size 0
  sctp: Copy struct sctp_sock.autoclose to userspace using put_user()
  sctp: Define usercopy region in SCTP proto slab cache
  caif: Define usercopy region in caif proto slab cache
  ip: Define usercopy region in IP proto slab cache
  net: Define usercopy region in struct proto slab cache
  scsi: Define usercopy region in scsi_sense_cache slab cache
  cifs: Define usercopy region in cifs_request slab cache
  vxfs: Define usercopy region in vxfs_inode slab cache
  ufs: Define usercopy region in ufs_inode_cache slab cache
  ...

[ Based on a patch from Paolo Bonzini <pbonzini@redhat.com> ]

... basically doing exactly what we do for VMX:

- Passthrough SPEC_CTRL to guests (if enabled in guest CPUID)
- Save and restore SPEC_CTRL around VMExit and VMEntry only if the guest
  actually used it.
Signed-off-by: KarimAllah Ahmed <karahmed@amazon.de>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jun Nakajima <jun.nakajima@intel.com>
Cc: kvm@vger.kernel.org
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Asit Mallick <asit.k.mallick@intel.com>
Cc: Arjan Van De Ven <arjan.van.de.ven@intel.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Ashok Raj <ashok.raj@intel.com>
Link: https://lkml.kernel.org/r/1517669783-20732-1-git-send-email-karahmed@amazon.de

[ Based on a patch from Ashok Raj <ashok.raj@intel.com> ]

Add direct access to MSR_IA32_SPEC_CTRL for guests. This is needed for
guests that will only mitigate Spectre V2 through IBRS+IBPB and will not
be using a retpoline+IBPB based approach.

To avoid the overhead of saving and restoring the MSR_IA32_SPEC_CTRL for
guests that do not actually use the MSR, only start saving and restoring
when a non-zero is written to it.

No attempt is made to handle STIBP here, intentionally. Filtering STIBP
may be added in a future patch, which may require trapping all writes
if we don't want to pass it through directly to the guest.

[dwmw2: Clean up CPUID bits, save/restore manually, handle reset]
Signed-off-by: KarimAllah Ahmed <karahmed@amazon.de>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jun Nakajima <jun.nakajima@intel.com>
Cc: kvm@vger.kernel.org
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Asit Mallick <asit.k.mallick@intel.com>
Cc: Arjan Van De Ven <arjan.van.de.ven@intel.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Ashok Raj <ashok.raj@intel.com>
Link: https://lkml.kernel.org/r/1517522386-18410-5-git-send-email-karahmed@amazon.de

Intel processors use MSR_IA32_ARCH_CAPABILITIES MSR to indicate RDCL_NO
(bit 0) and IBRS_ALL (bit 1). This is a read-only MSR. By default the
contents will come directly from the hardware, but user-space can still
override it.

[dwmw2: The bit in kvm_cpuid_7_0_edx_x86_features can be unconditional]
Signed-off-by: KarimAllah Ahmed <karahmed@amazon.de>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jun Nakajima <jun.nakajima@intel.com>
Cc: kvm@vger.kernel.org
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Asit Mallick <asit.k.mallick@intel.com>
Cc: Arjan Van De Ven <arjan.van.de.ven@intel.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Ashok Raj <ashok.raj@intel.com>
Link: https://lkml.kernel.org/r/1517522386-18410-4-git-send-email-karahmed@amazon.de

The Indirect Branch Predictor Barrier (IBPB) is an indirect branch
control mechanism. It keeps earlier branches from influencing
later ones.

Unlike IBRS and STIBP, IBPB does not define a new mode of operation.
It's a command that ensures predicted branch targets aren't used after
the barrier. Although IBRS and IBPB are enumerated by the same CPUID
enumeration, IBPB is very different.

IBPB helps mitigate against three potential attacks:

* Mitigate guests from being attacked by other guests.
  - This is addressed by issing IBPB when we do a guest switch.

* Mitigate attacks from guest/ring3->host/ring3.
  These would require a IBPB during context switch in host, or after
  VMEXIT. The host process has two ways to mitigate
  - Either it can be compiled with retpoline
  - If its going through context switch, and has set !dumpable then
    there is a IBPB in that path.
    (Tim's patch: https://patchwork.kernel.org/patch/10192871)
  - The case where after a VMEXIT you return back to Qemu might make
    Qemu attackable from guest when Qemu isn't compiled with retpoline.
  There are issues reported when doing IBPB on every VMEXIT that resulted
  in some tsc calibration woes in guest.

* Mitigate guest/ring0->host/ring0 attacks.
  When host kernel is using retpoline it is safe against these attacks.
  If host kernel isn't using retpoline we might need to do a IBPB flush on
  every VMEXIT.

Even when using retpoline for indirect calls, in certain conditions 'ret'
can use the BTB on Skylake-era CPUs. There are other mitigations
available like RSB stuffing/clearing.

* IBPB is issued only for SVM during svm_free_vcpu().
  VMX has a vmclear and SVM doesn't.  Follow discussion here:
  https://lkml.org/lkml/2018/1/15/146

Please refer to the following spec for more details on the enumeration
and control.

Refer here to get documentation about mitigations.

https://software.intel.com/en-us/side-channel-security-support

[peterz: rebase and changelog rewrite]
[karahmed: - rebase
           - vmx: expose PRED_CMD if guest has it in CPUID
           - svm: only pass through IBPB if guest has it in CPUID
           - vmx: support !cpu_has_vmx_msr_bitmap()]
           - vmx: support nested]
[dwmw2: Expose CPUID bit too (AMD IBPB only for now as we lack IBRS)
        PRED_CMD is a write-only MSR]
Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: KarimAllah Ahmed <karahmed@amazon.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: kvm@vger.kernel.org
Cc: Asit Mallick <asit.k.mallick@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Arjan Van De Ven <arjan.van.de.ven@intel.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Jun Nakajima <jun.nakajima@intel.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Link: http://lkml.kernel.org/r/1515720739-43819-6-git-send-email-ashok.raj@intel.com
Link: https://lkml.kernel.org/r/1517522386-18410-3-git-send-email-karahmed@amazon.de

[dwmw2: Stop using KF() for bits in it, too]
Signed-off-by: KarimAllah Ahmed <karahmed@amazon.de>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Cc: kvm@vger.kernel.org
Cc: Radim Krčmář <rkrcmar@redhat.com>
Link: https://lkml.kernel.org/r/1517522386-18410-2-git-send-email-karahmed@amazon.de

Pull pstore update from Kees Cook:
 "Only a header cleanup this release; nice and quiet. :)

   - clean up hardirq header usage (Yang Shi)"

* tag 'pstore-v4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  fs: pstore: remove unused hardirq.h

Pull ext4 updates from Ted Ts'o:
 "Only miscellaneous cleanups and bug fixes for ext4 this cycle"

* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: create ext4_kset dynamically
  ext4: create ext4_feat kobject dynamically
  ext4: release kobject/kset even when init/register fail
  ext4: fix incorrect indentation of if statement
  ext4: correct documentation for grpid mount option
  ext4: use 'sbi' instead of 'EXT4_SB(sb)'
  ext4: save error to disk in __ext4_grp_locked_error()
  jbd2: fix sphinx kernel-doc build warnings
  ext4: fix a race in the ext4 shutdown path
  mbcache: make sure c_entry_count is not decremented past zero
  ext4: no need flush workqueue before destroying it
  ext4: fixed alignment and minor code cleanup in ext4.h
  ext4: fix ENOSPC handling in DAX page fault handler
  dax: pass detailed error code from dax_iomap_fault()
  mbcache: revert "fs/mbcache.c: make count_objects() more robust"
  mbcache: initialize entry->e_referenced in mb_cache_entry_create()
  ext4: fix up remaining files with SPDX cleanups

Pull dmi subsystem updates/fixes from Jean Delvare.

* 'dmi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  firmware: dmi: handle missing DMI data gracefully
  firmware: dmi_scan: Fix handling of empty DMI strings
  firmware: dmi_scan: Drop dmi_initialized
  firmware: dmi: Optimize dmi_matches

Merge branch 'fixes-v4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security

Pull integrity fixes from James Morris:

-  add James Bottommley as a Trusted Keys maintainer.

 - IMA: re-initialize iint->atomic_flags on iint_free(), from Mimi.

* 'fixes-v4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  ima: re-initialize iint->atomic_flags
  maintainers: update trusted keys

Pull the KVM prerequisites so the IBPB patches apply.

Pull networking fixes from David Miller:

 1) The bnx2x can hang if you give it a GSO packet with a segment size
    which is too big for the hardware, detect and drop in this case.
    From Daniel Axtens.

 2) Fix some overflows and pointer leaks in xtables, from Dmitry Vyukov.

 3) Missing RCU locking in igmp, from Eric Dumazet.

 4) Fix RX checksum handling on r8152, it can only checksum UDP and TCP
    packets. From Hayes Wang.

 5) Minor pacing tweak to TCP BBR congestion control, from Neal
    Cardwell.

 6) Missing RCU annotations in cls_u32, from Paolo Abeni.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (30 commits)
  Revert "defer call to mem_cgroup_sk_alloc()"
  soreuseport: fix mem leak in reuseport_add_sock()
  net: qlge: use memmove instead of skb_copy_to_linear_data
  net: qed: use correct strncpy() size
  net: cxgb4: avoid memcpy beyond end of source buffer
  cls_u32: add missing RCU annotation.
  r8152: set rx mode early when linking on
  r8152: fix wrong checksum status for received IPv4 packets
  nfp: fix TLV offset calculation
  net: pxa168_eth: add netconsole support
  net: igmp: add a missing rcu locking section
  ibmvnic: fix firmware version when no firmware level has been provided by the VIOS server
  vmxnet3: remove redundant initialization of pointer 'rq'
  lan78xx: remove redundant initialization of pointer 'phydev'
  net: jme: remove unused initialization of 'rxdesc'
  rtnetlink: remove check for IFLA_IF_NETNSID
  rocker: fix possible null pointer dereference in rocker_router_fib_event_work
  inet: Avoid unitialized variable warning in inet_unhash()
  net: bridge: Fix uninitialized error in br_fdb_sync_static()
  openvswitch: Remove padding from packet before L3+ conntrack processing
  ...

Pull GFS2 fixes from Bob Peterson:
 "Andreas Gruenbacher wrote two additional patches that we would like
  merged in this time. Both are regressions:

   - fix another kernel build dependency problem

   - fix a performance regression in glock dumps"

* tag 'gfs2-4.16.fixes2' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
  gfs2: Glock dump performance regression fix
  gfs2: Fix the crc32c dependency

Pull second set of SCSI updates from James Bottomley:
 "This is a set of three patches that depended on mq and zone changes in
  the block tree (now upstream)"

* tag 'scsi-postmerge' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: sd: Remove zone write locking
  scsi: sd_zbc: Initialize device request queue zoned data
  scsi: scsi-mq-debugfs: Show more information

Merge tag 'linux-kselftest-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull kselftest updates from Shuah Khan:
 "This update to Kselftest consists of fixes, cleanups, and SPDX license
  additions"

* tag 'linux-kselftest-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftests: vm: update .gitignore with missing generated file
  selftests/x86: Add <test_name>{,_32,_64} targets
  selftests: Fix loss of test output in run_kselftests.sh
  selftest: ftrace: Fix to add 256 kprobe events correctly
  selftest: ftrace: Fix to pick text symbols for kprobes
  selftests: media_tests: Add SPDX license identifier
  selftests: kselftest.h: Add SPDX license identifier
  selftests: kselftest_install.sh: Add SPDX license identifier
  selftests: gen_kselftest_tar.h: Add SPDX license identifier
  selftests: media_tests: Fix Makefile 'clean' target warning
  tools/testing: Fix trailing semicolon
  kselftest: fix OOM in memory compaction test
  selftests: seccomp: fix compile error seccomp_bpf

When pulling the recent pinctrl merge, I was surprised by how a
pinctrl-only pull request ended up rebuilding basically the whole
kernel.

The reason for that ended up being that <linux/device.h> included
<linux/pinctrl/devinfo.h>, so any change to that file ended up causing
pretty much every driver out there to be rebuilt.

The reason for that was because 'struct device' has this in it:

    #ifdef CONFIG_PINCTRL
        struct dev_pin_info     *pins;
    #endif

but we already avoid header includes for these kinds of things in that
header file, preferring to just use a forward-declaration of the
structure instead.  Exactly to avoid this kind of header dependency.

Since some drivers seem to expect that <linux/pinctrl/devinfo.h> header
to come in automatically, move the include to <linux/pinctrl/pinctrl.h>
instead.  It might be better to just make the includes more targeted,
but I'm not going to review every driver.

It would definitely be good to have a tool for finding and minimizing
header dependencies automatically - or at least help with them.  Right
now we almost certainly end up having way too many of these things, and
it's hard to test every single configuration.

FWIW, you can get a sense of the "hotness" of a header file with something
like this after doing a full build:

    find . -name '.*.o.cmd' -print0 |
        xargs -0 tail --lines=+2 |
        grep -v 'wildcard ' |
        tr ' \\' '\n' |
        sort | uniq -c | sort -n | less -S

which isn't exact (there are other things in those '*.o.cmd' than just
the dependencies, and the "--lines=+2" only removes the header), but
might a useful approximation.

With this patch, <linux/pinctrl/devinfo.h> drops to "only" having 833
users in the current x86-64 allmodconfig.  In contrast, <linux/device.h>
has 14857 build files including it directly or indirectly.

Of course, the headers that absolutely _everybody_ includes (things like
<linux/types.h> etc) get a score of 23000+.

Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Currently, when booting a kernel with DMI support on a platform that has
no DMI tables, the following output is emitted into the kernel log:

  [    0.128818] DMI not present or invalid.
  ...
  [    1.306659] dmi: Firmware registration failed.
  ...
  [    2.908681] dmi-sysfs: dmi entry is absent.

The first one is a pr_info(), but the subsequent ones are pr_err()s that
complain about a condition that is not really an error to begin with.

So let's clean this up, and give up silently if dma_available is not set.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Martin Hundebøll <mnhu@prevas.dk>
Signed-off-by: Jean Delvare <jdelvare@suse.de>

The handling of empty DMI strings looks quite broken to me:
* Strings from 1 to 7 spaces are not considered empty.
* True empty DMI strings (string index set to 0) are not considered
  empty, and result in allocating a 0-char string.
* Strings with invalid index also result in allocating a 0-char
  string.
* Strings starting with 8 spaces are all considered empty, even if
  non-space characters follow (sounds like a weird thing to do, but
  I have actually seen occurrences of this in DMI tables before.)
* Strings which are considered empty are reported as 8 spaces,
  instead of being actually empty.

Some of these issues are the result of an off-by-one error in memcmp,
the rest is incorrect by design.

So let's get it square: missing strings and strings made of only
spaces, regardless of their length, should be treated as empty and
no memory should be allocated for them. All other strings are
non-empty and should be allocated.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Fixes: 79da4721 ("x86: fix DMI out of memory problems")
Cc: Parag Warudkar <parag.warudkar@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>

I don't think it makes sense to check for a possible bad
initialization order at run time on every system when it is all
decided at build time.

A more efficient way to make sure developers do not introduce new
calls to dmi_check_system() too early in the initialization sequence
is to simply document the expected call order. That way, developers
have a chance to get it right immediately, without having to
test-boot their kernel, wonder why it does not work, and parse the
kernel logs for a warning message. And we get rid of the run-time
performance penalty as a nice side effect.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Ingo Molnar <mingo@kernel.org>

Function dmi_matches can me made a bit faster:

* The documented purpose of dmi_initialized is to catch too early
  calls to dmi_check_system(). I'm not fully convinced it justifies
  slowing down the initialization of all systems out there, but at
  least the check should not have been moved from dmi_check_system()
  to dmi_matches(). dmi_matches() is being called for every entry of
  the table passed to dmi_check_system(), causing the same redundant
  check to be performed again and again. So move it back to
  dmi_check_system(), reverting this specific portion of commit
  d7b1956f ("DMI: Introduce dmi_first_match to make the interface
  more flexible").

* Don't check for the exact_match flag again when we already know its
  value.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Fixes: d7b1956f ("DMI: Introduce dmi_first_match to make the interface more flexible")
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Jeff Garzik <jgarzik@redhat.com>

This patch effectively reverts commit 9f1c2674 ("net: memcontrol:
defer call to mem_cgroup_sk_alloc()").

Moving mem_cgroup_sk_alloc() to the inet_csk_accept() completely breaks
memcg socket memory accounting, as packets received before memcg
pointer initialization are not accounted and are causing refcounting
underflow on socket release.

Actually the free-after-use problem was fixed by
commit c0576e39 ("net: call cgroup_sk_alloc() earlier in
sk_clone_lock()") for the cgroup pointer.

So, let's revert it and call mem_cgroup_sk_alloc() just before
cgroup_sk_alloc(). This is safe, as we hold a reference to the socket
we're cloning, and it holds a reference to the memcg.

Also, let's drop BUG_ON(mem_cgroup_is_root()) check from
mem_cgroup_sk_alloc(). I see no reasons why bumping the root
memcg counter is a good reason to panic, and there are no realistic
ways to hit it.
Signed-off-by: Roman Gushchin <guro@fb.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

reuseport_add_sock() needs to deal with attaching a socket having
its own sk_reuseport_cb, after a prior
setsockopt(SO_ATTACH_REUSEPORT_?BPF)

Without this fix, not only a WARN_ONCE() was issued, but we were also
leaking memory.

Thanks to sysbot and Eric Biggers for providing us nice C repros.

------------[ cut here ]------------
socket already in reuseport group
WARNING: CPU: 0 PID: 3496 at net/core/sock_reuseport.c:119  
reuseport_add_sock+0x742/0x9b0 net/core/sock_reuseport.c:117
Kernel panic - not syncing: panic_on_warn set ...

CPU: 0 PID: 3496 Comm: syzkaller869503 Not tainted 4.15.0-rc6+ #245
Hardware name: Google Google Compute Engine/Google Compute Engine,
BIOS  
Google 01/01/2011
Call Trace:
  __dump_stack lib/dump_stack.c:17 [inline]
  dump_stack+0x194/0x257 lib/dump_stack.c:53
  panic+0x1e4/0x41c kernel/panic.c:183
  __warn+0x1dc/0x200 kernel/panic.c:547
  report_bug+0x211/0x2d0 lib/bug.c:184
  fixup_bug.part.11+0x37/0x80 arch/x86/kernel/traps.c:178
  fixup_bug arch/x86/kernel/traps.c:247 [inline]
  do_error_trap+0x2d7/0x3e0 arch/x86/kernel/traps.c:296
  do_invalid_op+0x1b/0x20 arch/x86/kernel/traps.c:315
  invalid_op+0x22/0x40 arch/x86/entry/entry_64.S:1079

Fixes: ef456144 ("soreuseport: define reuseport groups")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot+c0ea2226f77a42936bf7@syzkaller.appspotmail.com
Acked-by: Craig Gallek <kraig@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

gcc-8 points out that the skb_copy_to_linear_data() argument points to
the skb itself, which makes it run into a problem with overlapping
memcpy arguments:

In file included from include/linux/ip.h:20,
                 from drivers/net/ethernet/qlogic/qlge/qlge_main.c:26:
drivers/net/ethernet/qlogic/qlge/qlge_main.c: In function 'ql_realign_skb':
include/linux/skbuff.h:3378:2: error: 'memcpy' source argument is the same as destination [-Werror=restrict]
  memcpy(skb->data, from, len);

It's unclear to me what the best solution is, maybe it ought to use a
different helper that adjusts the skb data in a safe way. Simply using
memmove() here seems like the easiest workaround.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

passing the strlen() of the source string as the destination
length is pointless, and gcc-8 now warns about it:

drivers/net/ethernet/qlogic/qed/qed_debug.c: In function 'qed_grc_dump':
include/linux/string.h:253: error: 'strncpy' specified bound depends on the length of the source argument [-Werror=stringop-overflow=]

This changes qed_grc_dump_big_ram() to instead uses the length of
the destination buffer, and use strscpy() to guarantee nul-termination.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Building with link-time-optimizations revealed that the cxgb4 driver does
a fixed-size memcpy() from a variable-length constant string into the
network interface name:

In function 'memcpy',
    inlined from 'cfg_queues_uld.constprop' at drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.c:335:2,
    inlined from 'cxgb4_register_uld.constprop' at drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.c:719:9:
include/linux/string.h:350:3: error: call to '__read_overflow2' declared with attribute error: detected read beyond size of object passed as 2nd parameter
   __read_overflow2();
   ^

I can see two equally workable solutions: either we use a strncpy() instead
of the memcpy() to stop at the end of the input, or we make the source buffer
fixed length as well. This implements the latter.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

In a couple of points of the control path, n->ht_down is currently
accessed without the required RCU annotation. The accesses are
safe, but sparse complaints. Since we already held the
rtnl lock, let use rtnl_dereference().

Fixes: a1b7c5fd ("net: sched: add cls_u32 offload hooks for netdevs")
Fixes: de5df632 ("net: sched: cls_u32 changes to knode must appear atomic to readers")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>