- 17 Jan, 2013 40 commits
-
-
Chris Wilson authored
commit 93be8788 upstream. As along the error path we do not correct the user pin-count for the failure, we may end up with userspace believing that it has a pinned object at offset 0 (when interrupted by a signal for example). Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Chris Wilson authored
commit 901593f2 upstream. Avoid clobbering adjacent blocks if they happen to expire earlier and amalgamate together to form the requested hole. In passing this fixes a regression from commit ea7b1dd4 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Fri Feb 18 17:59:12 2011 +0100 drm: mm: track free areas implicitly which swaps the end address for size (with a potential overflow) and effectively causes the eviction code to clobber almost all earlier buffers above the evictee. v2: Check the original hole not the adjusted as the coloring may confuse us when later searching for the overlapping nodes. Also make sure that we do apply the range restriction and color adjustment in the same order for both scanning, searching and insertion. v3: Send the version that was actually tested. Note that this seems to be ducttape of decent quality ot paper over some of our unbind related gpu hangs reported since 3.7. It is not fully effective though, and certainly doesn't fix the underlying bug. Signed-off-by:
Norbert Preining <preining@logic.at> Acked-by: Dave Airlie <airlied@gmail.com Signed-off-by:
-
Seung-Woo Kim authored
commit be8a42ae upstream. Increasing ref counts of both dma-buf and gem for imported dma-buf come from gem makes memory leak. release function of dma-buf cannot be called because f_count of dma-buf increased by importing gem and gem ref count cannot be decrease because of exported dma-buf. So I add dma_buf_put() for imported gem come from its own gem into each drivers having prime_import and prime_export capabilities. With this, only gem ref count is increased if importing gem exported from gem of same driver. Signed-off-by:
Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by:
Kyungmin.park <kyungmin.park@samsung.com> Cc: Inki Dae <inki.dae@samsung.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Rob Clark <rob.clark@linaro.org> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Dave Airlie authored
commit 5b42427f upstream. As pointed out by Seung-Woo Kim this should have been passing flags like nouveau/radeon have. Signed-off-by:
-
Daniel Vetter authored
commit b0a2658a upstream. This piece of neat lore has been ported painstakingly and bug-for-bug compatible from the old crtc helper code. Imo it's utter nonsense. If you disconnected a cable and before you reconnect it, userspace (or the kernel) does an set_crtc call, this will result in that connector getting disabled. Which will result in a nice black screen when plugging in the cable again. There's absolutely no reason the kernel does such policy enforcements - if userspace tries to set up a mode on something disconnected we might fail loudly (since the dp link training fails), but silently adjusting the output configuration behind userspace's back is a recipe for disaster. Specifically I think that this could explain some of our MI_WAIT hangs around suspend, where userspace issues a scanline wait on a disable pipe. This mechanisims here could explain how that pipe got disabled without userspace noticing. Note that this fixes a NULL deref at BIOS takeover when the firmware sets up a disconnected output in a clone configuration with a connected output on the 2nd pipe: When doing the full modeset we don't have a mode for the 2nd pipe and OOPS. On the first pipe this doesn't matter, since at boot-up the fbdev helpers will set up the choosen configuration on that on first. Since this is now the umptenth bug around handling this imo brain-dead semantics correctly, I think it's time to kill it and see whether there's any userspace out there which relies on this. It also nicely demonstrates that we have a tiny window where DP hotplug can still kill the driver. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=58396Tested-by:
Peter Ujfalusi <peter.ujfalusi@gmail.com> Reviewed-by:
Rodrigo Vivi <rodrigo.vivi@gmail.com> Reviewed-by:
Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by:
-
Chris Wilson authored
commit b4a98e57 upstream. If we accumulate unpin tasks because we are pageflipping faster than the system can schedule its workers, we can effectively create a pin-leak. The solution taken here is to limit the number of unpin tasks we have per-crtc and to flush those outstanding tasks if we accumulate too many. This should prevent any jitter in the normal case, and also prevent the hang if we should run too fast. Note: It is important that we switch from the system workqueue to our own dev_priv->wq since all work items on that queue are guaranteed to only need the dev->struct_mutex and not any modeset resources. For otherwise if we have a work item ahead in the queue which needs the modeset lock (like the output detect work used by both polling or hpd), this work and so the unpin work will never execute since the pageflip code already holds that lock. Unfortunately there's no lockdep support for this scenario in the workqueue code. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=46991Reported-and-tested-by:
Tvrtko Ursulin <tvrtko.ursulin@onelan.co.uk> Signed-off-by:
Daniel Gnoutcheff <daniel@gnoutcheff.name> Signed-off-by:
-
Chris Wilson authored
commit e7d841ca upstream. Before queuing the flip but crucially after attaching the unpin-work to the crtc, we continue to setup the unpin-work. However, should the hardware fire early, we see the connected unpin-work and queue the task. The task then promptly runs and unpins the fb before we finish taking the required references or even pinning it... Havoc. To close the race, we use the flip-pending atomic to indicate when the flip is finally setup and enqueued. So during the flip-done processing, we can check more accurately whether the flip was expected. v2: Add the appropriate mb() to ensure that the writes to the page-flip worker are complete prior to marking it active and emitting the MI_FLIP. On the read side, the mb should be enforced by the spinlocks. Signed-off-by:
-
Mel Gorman authored
commit 8fb74b9f upstream. Eric Wong reported on 3.7 and 3.8-rc2 that ppoll() got stuck when waiting for POLLIN on a local TCP socket. It was easier to trigger if there was disk IO and dirty pages at the same time and he bisected it to commit 1fb3f8ca ("mm: compaction: capture a suitable high-order page immediately when it is made available"). The intention of that patch was to improve high-order allocations under memory pressure after changes made to reclaim in 3.6 drastically hurt THP allocations but the approach was flawed. For Eric, the problem was that page->pfmemalloc was not being cleared for captured pages leading to a poor interaction with swap-over-NFS support causing the packets to be dropped. However, I identified a few more problems with the patch including the fact that it can increase contention on zone->lock in some cases which could result in async direct compaction being aborted early. In retrospect the capture patch took the wrong approach. What it should have done is mark the pageblock being migrated as MIGRATE_ISOLATE if it was allocating for THP and avoided races that way. While the patch was showing to improve allocation success rates at the time, the benefit is marginal given the relative complexity and it should be revisited from scratch in the context of the other reclaim-related changes that have taken place since the patch was first written and tested. This patch partially reverts commit 1fb3f8ca ("mm: compaction: capture a suitable high-order page immediately when it is made available"). Reported-and-tested-by:
Eric Wong <normalperson@yhbt.net> Tested-by:
Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
Mel Gorman <mgorman@suse.de> Cc: David Miller <davem@davemloft.net> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Paulo Zanoni authored
commit 13888d78 upstream. I actually found this problem on Haswell, but then discovered Ivy Bridge also has it by reading the spec. I don't have the hardware to test this. Signed-off-by:
Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by:
Damien Lespiau <damien.lespiau@intel.com> Signed-off-by:
-
Aaro Koskinen authored
commit eda85d6a upstream. Check that the AGP aperture can be mapped. This follows a similar change done for Radeon (commit 365048ff, drm/radeon: AGP memory is only I/O if the aperture can be mapped by the CPU.). The patch fixes the following error seen on G5 iMac: nouveau E[ DRM] failed to create kernel channel, -12 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=58806Reviewed-by:
Michel Dänzer <michel@daenzer.net> Signed-off-by:
Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by:
-
Niels Ole Salscheider authored
commit 0a9069d3 upstream. DDC information can be accessed using AUX CH Fixes failure to probe monitors on some systems with DP bridge chips. agd5f: minor fixes Signed-off-by:
Niels Ole Salscheider <niels_ole@salscheider-online.de> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Alex Deucher authored
commit cafa59b9 upstream. Apple cards do not provide data tables in the vbios so we have to hard code the connector parameters in the driver. Reported-by:
Albrecht Dreß <albrecht.dress@arcor.de> Signed-off-by:
-
Alex Deucher authored
commit 668bbc81 upstream. It's used in a recent mesa commit: http://cgit.freedesktop.org/mesa/mesa/commit/?id=24b1206ab2dcd506aaac3ef656aebc8bc20cd27a and there may be some other cases in the future where it's required. Signed-off-by:
Jerome Glisse <jglisse@redhat.com> Signed-off-by:
-
Jerome Glisse authored
commit 5f8f635e upstream. radeon_fence_wait_empty_locked should not trigger GPU reset as no place where it's call from would benefit from such thing and it actually lead to a kernel deadlock in case the reset is triggered from pm codepath. Instead force ring completion in place where it makes sense or return early in others. Signed-off-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
Jerome Glisse authored
commit 76903b96 upstream. Force all fence to signal if GPU reset failed so no process get stuck on waiting fence. Signed-off-by:
-
Jerome Glisse authored
commit d3493574 upstream. Modeset path seems to conflict sometimes with the memory management leading to kernel deadlock. This move modesetting reset after GPU acceleration reset. Signed-off-by:
-
Jerome Glisse authored
commit bd25f078 upstream. Set the proper number of tile pipe that should be a multiple of pipe depending on the number of se engine. Fix: https://bugs.freedesktop.org/show_bug.cgi?id=56405 https://bugs.freedesktop.org/show_bug.cgi?id=56720 v2: Don't change sumo2 Signed-off-by:
-
Alex Deucher authored
commit 93927f9c upstream. Need to use the adjusted mode since we are sending native timing and using the scaler for non-native modes. Signed-off-by:
-
Alex Deucher authored
commit a02dc74b upstream. Fixes flickering with some high res montiors. Signed-off-by:
-
Christian König authored
commit ae133a11 upstream. Redirect invalid memory accesses to the default page instead of locking up the memory controller. Also enable the invalid memory access interrupts and start spamming system log with it. v2 (agd5f): fix up against 2 level PT changes Signed-off-by:
Christian König <deathsimple@vodafone.de> Signed-off-by:
-
Woodhouse, David authored
commit 6491d4d0 upstream. The dma_pte_free_pagetable() function will only free a page table page if it is asked to free the *entire* 2MiB range that it covers. So if a page table page was used for one or more small mappings, it's likely to end up still present in the page tables... but with no valid PTEs. This was fine when we'd only be repopulating it with 4KiB PTEs anyway but the same virtual address range can end up being reused for a *large-page* mapping. And in that case were were trying to insert the large page into the second-level page table, and getting a complaint from the sanity check in __domain_mapping() because there was already a corresponding entry. This was *relatively* harmless; it led to a memory leak of the old page table page, but no other ill-effects. Fix it by calling dma_pte_clear_range (hopefully redundant) and dma_pte_free_pagetable() before setting up the new large page. Signed-off-by:
David Woodhouse <David.Woodhouse@intel.com> Tested-by:
Ravi Murty <Ravi.Murty@intel.com> Tested-by:
Sudeep Dutt <sudeep.dutt@intel.com> Signed-off-by:
-
Dan Williams authored
commit 999a7c57 upstream. Add device IDs for WiMAX function of Intel 6150 cards. Signed-off-by:
Dan Williams <dcbw@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Alexey Khoroshilov authored
commit 2cbba75a upstream. Users of jffs2_do_reserve_space() expect they still held erase_completion_lock after call to it. But there is a path where jffs2_do_reserve_space() leaves erase_completion_lock unlocked. The patch fixes it. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by:
Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by:
-
Trond Myklebust authored
commit 87ed5003 upstream. If the rpc_task exits while holding the socket write lock before it has allocated an rpc slot, then the usual mechanism for releasing the write lock in xprt_release() is defeated. The problem occurs if the call to xprt_lock_write() initially fails, so that the rpc_task is put on the xprt->sending wait queue. If the task exits after being assigned the lock by __xprt_lock_write_func, but before it has retried the call to xprt_lock_and_alloc_slot(), then it calls xprt_release() while holding the write lock, but will immediately exit due to the test for task->tk_rqstp != NULL. Reported-by:
Chris Perl <chris.perl@gmail.com> Signed-off-by:
Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by:
-
Trond Myklebust authored
commit c6567ed1 upstream. This patch ensures that we free the rpc_task after the cleanup callbacks are done in order to avoid a deadlock problem that can be triggered if the callback needs to wait for another workqueue item to complete. Signed-off-by:
-
J. Bruce Fields authored
commit 621eb19c upstream. Commit bbf43dc8 "sunrpc/cache.h: replace simple_strtoul" introduced new range-checking which could cause get_int to fail on unsigned integers too large to be represented as an int. We could parse them as unsigned instead--but it turns out svcgssd is actually passing down "-1" in some cases. Which is perhaps stupid, but there's nothing we can do about it now. So just revert back to the previous "sloppy" behavior that accepts either representation. Reported-by:
Sven Geggus <lists@fuchsschwanzdomain.de> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
Stanislav Kinsbursky authored
commit cd6c5968 upstream. There are SUNRPC clients, which program doesn't have pipe_dir_name. These clients can be skipped on PipeFS events, because nothing have to be created or destroyed. But instead of breaking in case of such a client was found, search for suitable client over clients list have to be continued. Otherwise some clients could not be covered by PipeFS event handler. Signed-off-by:
Stanislav Kinsbursky <skinsbursky@parallels.com> Signed-off-by:
-
Trond Myklebust authored
commit 642fe4d0 upstream. rpc_kill_sb() must defer calling put_net() until after the notifier has been called, since most (all?) of the notifier callbacks assume that sb->s_fs_info points to a valid net namespace. It also must not call put_net() if the call to rpc_fill_super was unsuccessful. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=48421Signed-off-by:
-
Tomi Valkeinen authored
commit ca2e16fa upstream. The i2c handling in tfp410 driver, which handles converting parallel RGB to DVI, was changed in 958f2717 (OMAPDSS: TFP410: pdata rewrite). The patch changed what value the driver considers as invalid/undefined. Before the patch, 0 was the invalid value, but as 0 is a valid bus number, the patch changed this to -1. However, the fact was missed that many board files do not define the bus number at all, thus it's left to 0. This causes the driver to fail to get the i2c bus, exiting from the driver's probe with an error, meaning that the DVI output does not work for those boards. This patch fixes the issue by changing the i2c_bus number field in the driver's platform data from u16 to int, and setting the bus number to -1 in the board files for the boards that did not define the bus. The exception is devkit8000, for which the bus is set to 1, which is the correct bus for that board. The bug exists in v3.5+ kernels. Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com> Reported-by:
Thomas Weber <thomas@tomweber.eu> Cc: Thomas Weber <thomas@tomweber.eu> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Pawel Moll authored
commit bd1ee804 upstream. Since commit 1f2bfbd0 "kbuild: link of vmlinux moved to a script" make clean with M=<dir> argument (so cleaning external module) removes vmlinux, System.map and couple of other files from the *main* kernel build directory! This not what was happening before and almost certainly not what one would expect. This patch moves makes the clean target of the script called only when !KBUILD_EXTMOD. Signed-off-by:
Pawel Moll <pawel.moll@arm.com> Signed-off-by:
Michal Marek <mmarek@suse.cz> Signed-off-by:
-
Wolfram Sang authored
commit 6f2a6a52 upstream. It could happen (1 out of 100 times) that NAND did not start up correctly after warm rebooting, so the kernel could not find the UBI or DMA timed out due to a stalled BCH. When resetting BCH together with GPMI, the issue could not be observed anymore (after 10000+ reboots). We probably need the consistent state already before sending any command to NAND, even when no ECC is needed. I chose to keep the extra reset for BCH when changing the flash layout to be on the safe side. Signed-off-by:
Wolfram Sang <w.sang@pengutronix.de> Acked-by:
Huang Shijie <b32955@freescale.com> Signed-off-by:
-
Nathan Williams authored
commit d1f3b65d upstream. Loading cs553x_nand with Hynix H27U1G8F2BTR NAND flash causes this bug: kernel BUG at drivers/mtd/nand/nand_base.c:3345! invalid opcode: 0000 [#1] Modules linked in: cs553x_nand(+) vfat fat usb_storage ehci_hcd usbcore usb_comr Pid: 436, comm: modprobe Not tainted 3.6.7 #1 EIP: 0060:[<c118d205>] EFLAGS: 00010296 CPU: 0 EIP is at nand_scan_tail+0x64c/0x69c EAX: 00000034 EBX: cea6ed98 ECX: 00000000 EDX: 00000000 ESI: cea6ec00 EDI: cea6ec00 EBP: 20000000 ESP: cdd17e48 DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068 CR0: 8005003b CR2: 0804e119 CR3: 0d850000 CR4: 00000090 DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 DR6: ffff0ff0 DR7: 00000400 Process modprobe (pid: 436, ti=cdd16000 task=cdd1c320 task.ti=cdd16000) Stack: c12e962c c118f7ef 00000003 cea6ed98 d014b25c 20000000 fffff007 00000001 00000000 cdd53b00 d014b000 c1001021 cdd53b00 d01493c0 cdd53b00 cdd53b00 d01493c0 c1047f83 d014b4a0 00000000 cdd17f9c ce4be454 cdd17f48 cdd1c320 Call Trace: [<c118f7ef>] ? nand_scan+0x1b/0x4d [<d014b25c>] ? init_module+0x25c/0x2de [cs553x_nand] [<d014b000>] ? 0xd014afff [<c1001021>] ? do_one_initcall+0x21/0x111 [<c1047f83>] ? sys_init_module+0xe4/0x1261 [<c1031207>] ? task_work_run+0x36/0x43 [<c1265ced>] ? syscall_call+0x7/0xb Code: fa ff ff c7 86 d8 00 00 00 01 00 00 00 e9 5f fc ff ff 68 f8 26 2e c1 e8 a7 EIP: [<c118d205>] nand_scan_tail+0x64c/0x69c SS:ESP 0068:cdd17e48 Initialising ecc.strength before the call to nand_scan() fixes this. Signed-off-by:
Nathan Williams <nathan@traverse.com.au> Acked-by:
Brian Norris <computersforpeace@gmail.com> Acked-by:
Mike Dunn <mikedunn@newsguy.com> Signed-off-by:
-
Theodore Ts'o authored
commit aeb1e5d6 upstream. Commit fa77dcfa introduces block bitmap checksum calculation into ext4_new_inode() in the case that block group was uninitialized. However we brelse() the bitmap buffer before we attempt to checksum it so we have no guarantee that the buffer is still there. Fix this by releasing the buffer after the possible checksum computation. Signed-off-by:
Lukas Czerner <lczerner@redhat.com> Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu> Acked-by:
Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by:
-
Eugene Shatokhin authored
commit 24ec19b0 upstream. In ext4_xattr_set_acl(), if ext4_journal_start() returns an error, posix_acl_release() will not be called for 'acl' which may result in a memory leak. This patch fixes that. Reviewed-by:
Eugene Shatokhin <eugene.shatokhin@rosalab.ru> Signed-off-by:
-
Geert Uytterhoeven authored
commit 90a38d99 upstream. Older gcc (< 4.4) doesn't like files starting with Unicode BOMs: include/linux/mfd/da9055/core.h:1: error: stray ‘\357’ in program include/linux/mfd/da9055/core.h:1: error: stray ‘\273’ in program include/linux/mfd/da9055/core.h:1: error: stray ‘\277’ in program include/linux/mfd/da9055/pdata.h:1: error: stray ‘\357’ in program include/linux/mfd/da9055/pdata.h:1: error: stray ‘\273’ in program include/linux/mfd/da9055/pdata.h:1: error: stray ‘\277’ in program include/linux/mfd/da9055/reg.h:1: error: stray ‘\357’ in program include/linux/mfd/da9055/reg.h:1: error: stray ‘\273’ in program include/linux/mfd/da9055/reg.h:1: error: stray ‘\277’ in program Remove the BOMs, the rest of the files is plain ASCII anyway. Output of "file" before: include/linux/mfd/da9055/core.h: UTF-8 Unicode (with BOM) C program text include/linux/mfd/da9055/pdata.h: UTF-8 Unicode (with BOM) C program text include/linux/mfd/da9055/reg.h: UTF-8 Unicode (with BOM) C program text Output of "file" after: include/linux/mfd/da9055/core.h: ASCII C program text include/linux/mfd/da9055/pdata.h: ASCII C program text include/linux/mfd/da9055/reg.h: ASCII C program text Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
Samuel Ortiz <sameo@linux.intel.com> Signed-off-by:
-
Charles Keepax authored
commit b9fbb62e upstream. mfd_remove_devices would iterate over all devices sharing a parent with an mfd device regardless of whether they were allocated by the mfd core or not. This especially caused problems when the device structure was not contained within a platform_device, because to_platform_device is used on each device pointer. This patch defines a device_type for mfd devices and checks this is present from mfd_remove_devices_fn before processing the device. Signed-off-by:
Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Tested-by:
Peter Tyser <ptyser@xes-inc.com> Reviewed-by:
Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by:
-
Mark Brown authored
commit fee546ce upstream. This is supported identically to the previous revisions. Signed-off-by:
-
Chris Boot authored
commit e1fe2060 upstream. If the TPG memory is allocated successfully, but we fail further along in the function, a dangling pointer to freed memory is left in the TPort structure. This is mostly harmless, but does prevent re-trying the operation without first removing the TPort altogether. Reported-by:
Chen Gang <gang.chen@asianux.com> Signed-off-by:
Chris Boot <bootc@bootc.net> Cc: Andy Grover <agrover@redhat.com> Cc: Nicholas A. Bellinger <nab@linux-iscsi.org> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by:
-
Yi Zou authored
commit 9f4ad44b upstream. The lockdep warning below is in theory correct but it will be in really weird rare situation that ends up that deadlock since the tcm fc session is hashed based the rport id. Nonetheless, the complaining below is about rcu callback that does the transport_deregister_session() is happening in softirq, where transport_register_session() that happens earlier is not. This triggers the lockdep warning below. So, just fix this to make lockdep happy by disabling the soft irq before calling transport_register_session() in ft_prli. BTW, this was found in FCoE VN2VN over two VMs, couple of create and destroy would get this triggered. v1: was enforcing register to be in softirq context which was not righ. See, http://www.spinics.net/lists/target-devel/msg03614.html v2: following comments from Roland&Nick (thanks), it seems we don't have to do transport_deregister_session() in rcu callback, so move it into ft_sess_free() but still do kfree() of the corresponding ft_sess struct in rcu callback to make sure the ft_sess is not freed till the rcu callback. ... [ 1328.370592] scsi2 : FCoE Driver [ 1328.383429] fcoe: No FDMI support. [ 1328.384509] host2: libfc: Link up on port (000000) [ 1328.934229] host2: Assigned Port ID 00a292 [ 1357.232132] host2: rport 00a393: Remove port [ 1357.232568] host2: rport 00a393: Port sending LOGO from Ready state [ 1357.233692] host2: rport 00a393: Delete port [ 1357.234472] host2: rport 00a393: work event 3 [ 1357.234969] host2: rport 00a393: callback ev 3 [ 1357.235979] host2: rport 00a393: Received a LOGO response closed [ 1357.236706] host2: rport 00a393: work delete [ 1357.237481] [ 1357.237631] ================================= [ 1357.238064] [ INFO: inconsistent lock state ] [ 1357.238450] 3.7.0-rc7-yikvm+ #3 Tainted: G O [ 1357.238450] --------------------------------- [ 1357.238450] inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. [ 1357.238450] ksoftirqd/0/3 [HC0[0]:SC1[1]:HE0:SE0] takes: [ 1357.238450] (&(&se_tpg->session_lock)->rlock){+.?...}, at: [<ffffffffa01eacd4>] transport_deregister_session+0x41/0x148 [target_core_mod] [ 1357.238450] {SOFTIRQ-ON-W} state was registered at: [ 1357.238450] [<ffffffff810834f5>] mark_held_locks+0x6d/0x95 [ 1357.238450] [<ffffffff8108364a>] trace_hardirqs_on_caller+0x12d/0x197 [ 1357.238450] [<ffffffff810836c1>] trace_hardirqs_on+0xd/0xf [ 1357.238450] [<ffffffff8149caba>] _raw_spin_unlock_irq+0x2d/0x45 [ 1357.238450] [<ffffffffa01e8d10>] __transport_register_session+0xb8/0x122 [target_core_mod] [ 1357.238450] [<ffffffffa01e8dbe>] transport_register_session+0x44/0x5a [target_core_mod] [ 1357.238450] [<ffffffffa018e32c>] ft_prli+0x1e3/0x275 [tcm_fc] [ 1357.238450] [<ffffffffa0160e8d>] fc_rport_recv_req+0x95e/0xdc5 [libfc] [ 1357.238450] [<ffffffffa015be88>] fc_lport_recv_els_req+0xc4/0xd5 [libfc] [ 1357.238450] [<ffffffffa015c778>] fc_lport_recv_req+0x12f/0x18f [libfc] [ 1357.238450] [<ffffffffa015a6d7>] fc_exch_recv+0x8ba/0x981 [libfc] [ 1357.238450] [<ffffffffa0176d7a>] fcoe_percpu_receive_thread+0x47a/0x4e2 [fcoe] [ 1357.238450] [<ffffffff810549f1>] kthread+0xb1/0xb9 [ 1357.238450] [<ffffffff814a40ec>] ret_from_fork+0x7c/0xb0 [ 1357.238450] irq event stamp: 275411 [ 1357.238450] hardirqs last enabled at (275410): [<ffffffff810bb6a0>] rcu_process_callbacks+0x229/0x42a [ 1357.238450] hardirqs last disabled at (275411): [<ffffffff8149c2f7>] _raw_spin_lock_irqsave+0x22/0x8e [ 1357.238450] softirqs last enabled at (275394): [<ffffffff8103d669>] __do_softirq+0x246/0x26f [ 1357.238450] softirqs last disabled at (275399): [<ffffffff8103d6bb>] run_ksoftirqd+0x29/0x62 [ 1357.238450] [ 1357.238450] other info that might help us debug this: [ 1357.238450] Possible unsafe locking scenario: [ 1357.238450] [ 1357.238450] CPU0 [ 1357.238450] ---- [ 1357.238450] lock(&(&se_tpg->session_lock)->rlock); [ 1357.238450] <Interrupt> [ 1357.238450] lock(&(&se_tpg->session_lock)->rlock); [ 1357.238450] [ 1357.238450] *** DEADLOCK *** [ 1357.238450] [ 1357.238450] no locks held by ksoftirqd/0/3. [ 1357.238450] [ 1357.238450] stack backtrace: [ 1357.238450] Pid: 3, comm: ksoftirqd/0 Tainted: G O 3.7.0-rc7-yikvm+ #3 [ 1357.238450] Call Trace: [ 1357.238450] [<ffffffff8149399a>] print_usage_bug+0x1f5/0x206 [ 1357.238450] [<ffffffff8100da59>] ? save_stack_trace+0x2c/0x49 [ 1357.238450] [<ffffffff81082aae>] ? print_irq_inversion_bug.part.14+0x1ae/0x1ae [ 1357.238450] [<ffffffff81083336>] mark_lock+0x106/0x258 [ 1357.238450] [<ffffffff81084e34>] __lock_acquire+0x2e7/0xe53 [ 1357.238450] [<ffffffff8102903d>] ? pvclock_clocksource_read+0x48/0xb4 [ 1357.238450] [<ffffffff810ba6a3>] ? rcu_process_gp_end+0xc0/0xc9 [ 1357.238450] [<ffffffffa01eacd4>] ? transport_deregister_session+0x41/0x148 [target_core_mod] [ 1357.238450] [<ffffffff81085ef1>] lock_acquire+0x119/0x143 [ 1357.238450] [<ffffffffa01eacd4>] ? transport_deregister_session+0x41/0x148 [target_core_mod] [ 1357.238450] [<ffffffff8149c329>] _raw_spin_lock_irqsave+0x54/0x8e [ 1357.238450] [<ffffffffa01eacd4>] ? transport_deregister_session+0x41/0x148 [target_core_mod] [ 1357.238450] [<ffffffffa01eacd4>] transport_deregister_session+0x41/0x148 [target_core_mod] [ 1357.238450] [<ffffffff810bb6a0>] ? rcu_process_callbacks+0x229/0x42a [ 1357.238450] [<ffffffffa018ddc5>] ft_sess_rcu_free+0x17/0x24 [tcm_fc] [ 1357.238450] [<ffffffffa018ddae>] ? ft_sess_free+0x1b/0x1b [tcm_fc] [ 1357.238450] [<ffffffff810bb6d7>] rcu_process_callbacks+0x260/0x42a [ 1357.238450] [<ffffffff8103d55d>] __do_softirq+0x13a/0x26f [ 1357.238450] [<ffffffff8149b34e>] ? __schedule+0x65f/0x68e [ 1357.238450] [<ffffffff8103d6bb>] run_ksoftirqd+0x29/0x62 [ 1357.238450] [<ffffffff8105c83c>] smpboot_thread_fn+0x1a5/0x1aa [ 1357.238450] [<ffffffff8105c697>] ? smpboot_unregister_percpu_thread+0x47/0x47 [ 1357.238450] [<ffffffff810549f1>] kthread+0xb1/0xb9 [ 1357.238450] [<ffffffff8149b49d>] ? wait_for_common+0xbb/0x10a [ 1357.238450] [<ffffffff81054940>] ? __init_kthread_worker+0x59/0x59 [ 1357.238450] [<ffffffff814a40ec>] ret_from_fork+0x7c/0xb0 [ 1357.238450] [<ffffffff81054940>] ? __init_kthread_worker+0x59/0x59 [ 1417.440099] rport-2:0-0: blocked FC remote port time out: removing rport Signed-off-by:
Yi Zou <yi.zou@intel.com> Cc: Open-FCoE <devel@open-fcoe.org> Cc: Nicholas A. Bellinger <nab@risingtidesystems.com> Signed-off-by:
-
Sebastian Andrzej Siewior authored
commit 40ff2c3b upstream. This patch changes vectored file I/O to use kmap + kunmap when mapping incoming SGL memory -> struct iovec in order to properly support 32-bit highmem configurations. This is because an extra bounce buffer may be required when processing scatterlist pages allocated with GFP_KERNEL. Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by:
-
