- 23 Sep, 2019 3 commits
-
-
Dan Carpenter authored
There were a couple places where the return value wasn't assigned so the error handling wouldn't trigger. Fixes: 5c0769af ("ASoC: soc-dai: add snd_soc_dai_bespoke_trigger()") Fixes: 95aef355 ("ASoC: soc-dai: add snd_soc_dai_trigger()") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20190923142257.GB31251@mwandaSigned-off-by:
Mark Brown <broonie@kernel.org>
-
Sylwester Nawrocki authored
In case of WM1811 device there are currently being registered controls referring to registers not existing on that device. It has been noticed when getting values of "AIF1ADC2 Volume", "AIF1DAC2 Volume" controls was failing during ALSA state restoring at boot time: "amixer: Mixer hw:0 load error: Device or resource busy" Reading some registers through I2C was failing with EBUSY error and indeed these registers were not available according to the datasheet. To fix this controls not available on WM1811 are moved to a separate array and registered only for WM8994 and WM8958. There are some further differences between WM8994 and WM1811, e.g. registers 603h, 604h, 605h, which are not covered in this patch. Acked-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Acked-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Link: https://lore.kernel.org/r/20190920130218.32690-2-s.nawrocki@samsung.comSigned-off-by:
-
Sylwester Nawrocki authored
Ensure there is no OF node references kept when the driver is removed/unbound. Reviewed-by:
-
- 20 Sep, 2019 3 commits
-
-
Arnd Bergmann authored
SND_SOC_DM365_VOICE_CODEC is a 'bool' option in a choice statement, meaning it cannot be set to =m, but it selects two other drivers that we may want to be loadable modules after all: WARNING: unmet direct dependencies detected for SND_SOC_CQ0093VC Depends on [m]: SOUND [=m] && !UML && SND [=m] && SND_SOC [=m] Selected by [y]: - SND_SOC_DM365_VOICE_CODEC [=y] && <choice> Selected by [m]: - SND_SOC_ALL_CODECS [=m] && SOUND [=m] && !UML && SND [=m] && SND_SOC [=m] && COMPILE_TEST [=y] Add an intermediate symbol that sets SND_SOC_CQ0093VC and MFD_DAVINCI_VOICECODEC to =m if SND_SOC=m. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20190920075046.3210393-1-arnd@arndb.deSigned-off-by:
-
Peter Ujfalusi authored
24 bits is supported in all modes and 16 bit only when the codec is slave and the DAI is set to RIGHT_J. Remove the unsupported sample format. Signed-off-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20190919071652.31724-1-peter.ujfalusi@ti.comSigned-off-by:
-
Bard liao authored
commit a0a4bf57 ("ASoC: core: delete component->card_list in soc_remove_component only") was trying to fix a kernel oops when list_del was called twice without re-init the list. Use list_del_init() can solve it, too. Besides, it will be more readable if we cleanup all component related resource at soc_cleanup_component(). Suggested-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by:
Bard liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20190918133131.15045-1-yung-chuan.liao@linux.intel.comSigned-off-by:
-
- 18 Sep, 2019 2 commits
-
-
Kuninori Morimoto authored
SSI need to use rsnd_channel_normalization() for TDM-split mode, thus, channel check need to do after that. Signed-off-by:
-
Gregory CLEMENT authored
A potential bug was reported in the email "[BUG] atmel_ssc_dai: a possible sleep-in-atomic bug in atmel_ssc_shutdown"[1] Indeed in the function atmel_ssc_shutdown() free_irq() was called in a critical section protected by spinlock. However this spinlock is only used in atmel_ssc_shutdown() and atmel_ssc_startup() functions. After further analysis, it occurred that the call to these function are already protected by mutex used on the calling functions. Then we can remove the spinlock which will fix this bug as a side effect. Thanks to this patch the following message disappears: "BUG: sleeping function called from invalid context at kernel/locking/mutex.c:909" [1]: https://www.spinics.net/lists/alsa-devel/msg71286.htmlReviewed-by:
Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by:
Gregory CLEMENT <gregory.clement@bootlin.com> Link: https://lore.kernel.org/r/20190918100344.23629-1-gregory.clement@bootlin.comSigned-off-by:
-
- 17 Sep, 2019 2 commits
-
-
Bard Liao authored
We add component->card_list in the end of soc_probe_component(). In other words, component->card_list will not be added if there is an error in the soc_probe_component() function. So we can't delete component->card_list in the error handling of soc_probe_component(). Fixes: 22d14231 ("ASoC: soc-core: add soc_cleanup_component()") Signed-off-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20190916210353.6318-1-yung-chuan.liao@linux.intel.comSigned-off-by:
-
Mihai Serban authored
EDMA requires the period size to be multiple of maxburst. Otherwise the remaining bytes are not transferred and thus noise is produced. We can handle this issue by adding a constraint on SNDRV_PCM_HW_PARAM_PERIOD_SIZE to be multiple of tx/rx maxburst value. Signed-off-by:
Mihai Serban <mihai.serban@nxp.com> Signed-off-by:
Daniel Baluta <daniel.baluta@nxp.com> Acked-by:
Nicolin Chen <nicoleotsuka@gmail.com> Link: https://lore.kernel.org/r/20190913192807.8423-2-daniel.baluta@nxp.comSigned-off-by:
-
- 15 Sep, 2019 1 commit
-
-
Saiyam Doshi authored
Remove excess semicolon after closing parenthesis. Signed-off-by:
Saiyam Doshi <saiyamdoshi.in@gmail.com> Link: https://lore.kernel.org/r/20190914031133.GA28447@SDSigned-off-by:
-
- 13 Sep, 2019 1 commit
-
-
Viorel Suman authored
This is to allow machine drivers to set a certain bitclk rate which might not be exactly rate * frame size. Cc: NXP Linux Team <linux-imx@nxp.com> Signed-off-by:
Viorel Suman <viorel.suman@nxp.com> Signed-off-by:
-
- 11 Sep, 2019 1 commit
-
-
Saiyam Doshi authored
All these functions declares and initializes variable ret with '0' and without modifying 'ret' variable, it is returned. This patch removes this redundancy and returns '0' directly. Signed-off-by:
-
- 09 Sep, 2019 21 commits
-
-
Cheng-Yi Chiang authored
Add an op in hdmi_codec_ops so codec driver can register callback function to handle plug event. Driver in DRM can use this callback function to report connector status. Signed-off-by:
Cheng-Yi Chiang <cychiang@chromium.org> Link: https://lore.kernel.org/r/20190717083327.47646-2-cychiang@chromium.orgReviewed-by:
Tzung-Bi Shih <tzungbi@google.com> Signed-off-by:
-
Ben Zhang authored
Instead of clearing RT5677_PWR_ANLG2 (MX-64h) to 0 at SND_SOC_BIAS_OFF, we only clear the RT5677_PWR_CORE bit which is set at SND_SOC_BIAS_PREPARE. MICBIAS control bits are left unchanged. This fixed the bug where if MICBIAS1 widget is forced on, MICBIAS control bits will be cleared at suspend and never turned back on again, since DAPM thinks the widget is always on. Signed-off-by:
Ben Zhang <benzh@chromium.org> Signed-off-by:
Curtis Malainey <cujomalainey@chromium.org> Link: https://lore.kernel.org/r/20190906194636.217881-3-cujomalainey@chromium.orgSigned-off-by:
-
Curtis Malainey authored
In order to simplify understanding what register values are being written to the codec for debugging more advanced features (such as hotwording) it is best to remove magic numbers Signed-off-by:
-
Kuninori Morimoto authored
Current soc_unbind_aux_dev() implementation is very half, thus it is very unreadable. for_each_comp_order(order) { for_each_card_auxs_safe(card, comp, _comp) { (1) if (comp->driver->remove_order == order) { ... => soc_unbind_aux_dev(comp); } } soc_unbind_aux_dev() itself is not related to remove_order (1). And, it is called from soc_remove_aux_devices(), even though its paired function soc_bind_aux_dev() is called from snd_soc_instantiate_card(). It is very unbalance, and very difficult to understand. This patch do 1) update soc_bind_aux_dev() to self contained 2) call it from soc_cleanup_card_resources() to make up balance Signed-off-by: -
Kuninori Morimoto authored
It is easy to read code if it is cleanly using paired function/naming, like start <-> stop, register <-> unregister, etc, etc. But, current ALSA SoC code is very random, unbalance, not paired, etc. It is easy to create bug at the such code, and it will be difficult to debug. soc-core.c has soc_bind_aux_dev(), but, there is no its paired soc_unbind_aux_dev(). This patch adds soc_unbind_aux_dev(). Signed-off-by:
-
Kuninori Morimoto authored
Current soc_bind_aux_dev() implementation is very half, thus it is very unreadable. for_each_card_pre_auxs(xxx) { => ret = soc_bind_aux_dev(xxx); ... } This patch does all for_each_xxx() under soc_bind_aux_dev(), and makes it to self contained. Signed-off-by: -
Kuninori Morimoto authored
It is easy to read code if it is cleanly using paired function/naming, like start <-> stop, register <-> unregister, etc, etc. But, current ALSA SoC code is very random, unbalance, not paired, etc. It is easy to create bug at the such code, and it will be difficult to debug. This patch moves soc_probe_link_dais() next to soc_remove_link_dais() which is paired function. Signed-off-by:
-
Kuninori Morimoto authored
Current soc_probe_link_dais() implementation is very half, thus it is very difficult to read. for_each_comp_order(xxx) { for_each_card_rtds(xxx) => soc_probe_link_dais(xxx); } This patch does all for_each_xxx() under soc_probe_link_dais(), and makes it to self contained. Signed-off-by: -
Kuninori Morimoto authored
Current soc_probe_link_dais() (1) is called under probe_order (2), and it will initialize dai_link related settings at *Last* turn (3)(B). It is very complex code. static int soc_probe_link_dais(..., order) { (A) /* probe DAIs here */ ... (3) if (order != SND_SOC_COMP_ORDER_LAST) return 0; (B) /* initialize dai_link related settings */ ... } static int snd_soc_instantiate_card(...) { ... (2) for_each_comp_order(order) { for_each_card_rtds(...) { (1) ret = soc_probe_link_dais(..., order); } } } This patch separes soc_probe_link_dais() into "DAI probe" portion (A), and dai_link settings portion (B). The later is named as soc_link_init() by this patch. Signed-off-by: -
Kuninori Morimoto authored
It is easy to read code if it is cleanly using paired function/naming, like start <-> stop, register <-> unregister, etc, etc. But, current ALSA SoC code is very random, unbalance, not paired, etc. It is easy to create bug at the such code, and it will be difficult to debug. This patch moves soc_probe_dai() next to soc_remove_dai() which is paired function. Signed-off-by:
-
Kuninori Morimoto authored
Current soc_remove_link_dais() implementation is very half, thus it is very difficult to read. for_each_comp_order(xxx) { for_each_card_rtds(xxx) => soc_remove_link_dais(xxx); } This patch does all for_each_xxx() under soc_remove_link_dais(), and makes it to self contained. Signed-off-by: -
Kuninori Morimoto authored
Current soc_remove_link_components() implementation is very half, thus it is very difficult to read. for_each_comp_order(xxx) { for_each_card_rtds(xxx) => soc_remove_link_components(xxx); } This patch does all for_each_xxx() under soc_remove_link_components(), and makes it to self contained. Signed-off-by: -
Kuninori Morimoto authored
Current soc_probe_link_components() implementation is very half, thus it is very difficult to read. for_each_comp_order(xxx) { for_each_card_rtds(xxx) { => ret = soc_probe_link_components(xxx); ... } } This patch does all for_each_xxx() under soc_probe_link_components(), and makes it to self contained. Signed-off-by: -
Colin Ian King authored
Don't populate the array pd on the stack but instead make it static const. Makes the object code smaller by 82 bytes. Before: text data bss dec hex filename 26548 7288 64 33900 846c sound/soc/codecs/rt1308.o After: text data bss dec hex filename 26370 7384 64 33818 841a sound/soc/codecs/rt1308.o (gcc version 9.2.1, amd64) Signed-off-by:
Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20190907074634.22144-1-colin.king@canonical.comSigned-off-by:
-
Colin Ian King authored
Don't populate the array pd on the stack but instead make it static const. Makes the object code smaller by 93 bytes. Before: text data bss dec hex filename 38961 9784 64 48809 bea9 sound/soc/codecs/rt1305.o After: text data bss dec hex filename 38804 9848 64 48716 be4c sound/soc/codecs/rt1305.o (gcc version 9.2.1, amd64) Signed-off-by:
-
Colin Ian King authored
Don't populate the array pd on the stack but instead make it static const. Makes the object code smaller by 100 bytes. Before: text data bss dec hex filename 51463 13016 128 64607 fc5f sound/soc/codecs/rt1011.o After: text data bss dec hex filename 51299 13080 128 64507 fbfb sound/soc/codecs/rt1011.o (gcc version 9.2.1, amd64) Signed-off-by:
-
Katsuhiro Suzuki authored
This patch set 0Hz to sysclk when shutdown the card. Some codecs set rate constraints that derives from sysclk. This mechanism works correctly if machine drivers give fixed frequency. But simple-audio and audio-graph card set variable clock rate if 'mclk-fs' property exists. In this case, rate constraints will go bad scenario. For example a codec accepts three limited rates (mclk / 256, mclk / 384, mclk / 512). Bad scenario as follows (mclk-fs = 256): - Initialize sysclk by correct value (Ex. 12.288MHz) - Codec set constraints of PCM rate by sysclk 48kHz (1/256), 32kHz (1/384), 24kHz (1/512) - Play 48kHz sound, it's acceptable - Sysclk is not changed - Play 32kHz sound, it's acceptable - Set sysclk to 8.192MHz (= fs * mclk-fs = 32k * 256) - Codec set constraints of PCM rate by sysclk 32kHz (1/256), 21.33kHz (1/384), 16kHz (1/512) - Play 48kHz again, but it's NOT acceptable because constraints do not allow 48kHz So codecs treat 0Hz sysclk as signal of applying no constraints to avoid this problem. Signed-off-by:Katsuhiro Suzuki <katsuhiro@katsuster.net> Link: https://lore.kernel.org/r/20190907174501.19833-1-katsuhiro@katsuster.netSigned-off-by:
-
Katsuhiro Suzuki authored
This patch ignores sysclk setting if it is 0Hz. Some codecs treat 0Hz sysclk as signal of applying no constraints. This driver does not have such feature but current implementation outputs 'Failed to set mclk' error message if machine driver sets 0Hz sysclk to this driver. Signed-off-by:
-
Colin Ian King authored
Don't populate the arrays on the stack but instead make them static const. Makes the object code smaller by 37 bytes. Before: text data bss dec hex filename 16253 7200 0 23453 5b9d sound/soc/codecs/ad193x.o After: text data bss dec hex filename 16056 7360 0 23416 5b78 sound/soc/codecs/ad193x.o (gcc version 9.2.1, amd64) Signed-off-by:
-
Katsuhiro Suzuki authored
This patch supports some type of machine drivers that set 0 to mclk when sound device goes to idle state. After applied this patch, sysclk == 0 means there is no constraint of sound rate and other values will set constraints which is derived by sysclk setting. Original code refuses sysclk == 0 setting. But some boards and SoC (such as RockPro64 and RockChip I2S) has connected SoC MCLK out to ES8316 MCLK in. In this case, SoC side I2S will choose suitable frequency of MCLK such as fs * mclk-fs when user starts playing or capturing. Bad scenario as follows (mclk-fs = 256): - Initialize sysclk by correct value (Ex. 12.288MHz) - ES8316 set constraints of PCM rate by sysclk 48kHz (1/256), 32kHz (1/384), 30.720kHz (1/400), 24kHz (1/512), 16kHz (1/768), 12kHz (1/1024) - Play 48kHz sound, it's acceptable - Sysclk is not changed - Play 32kHz sound, it's acceptable - Set sysclk by 8.192MHz (= fs * mclk-fs = 32k * 256) - ES8316 set constraints of PCM rate by sysclk 32kHz (1/256), 21.33kHz (1/384), 20.48kHz (1/400), 16kHz (1/512), 10.66kHz (1/768), 8kHz (1/1024) - Play 48kHz again, but it's NOT acceptable because constraints list does not allow 48kHz Signed-off-by: -
Katsuhiro Suzuki authored
This patch removes redundant null checks for optional MCLK clock. And fix DT binding document for changing clock property to optional from required. Signed-off-by:
-
- 05 Sep, 2019 6 commits
-
-
YueHaibing authored
When do compile test, if SND_SOC_SOF_OF is not set, we get: sound/soc/sof/imx/imx8.o: In function `imx8_dsp_handle_request': imx8.c:(.text+0xb0): undefined reference to `snd_sof_ipc_msgs_rx' sound/soc/sof/imx/imx8.o: In function `imx8_ipc_msg_data': imx8.c:(.text+0xf4): undefined reference to `sof_mailbox_read' sound/soc/sof/imx/imx8.o: In function `imx8_dsp_handle_reply': imx8.c:(.text+0x160): undefined reference to `sof_mailbox_read' Make SND_SOC_SOF_IMX_TOPLEVEL always depends on SND_SOC_SOF_OF Reported-by:
Hulk Robot <hulkci@huawei.com> Fixes: 202acc56 ("ASoC: SOF: imx: Add i.MX8 HW support") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Reviewed-by:
-
Jerome Brunet authored
On the sm1, the TDMOUT number of input is extended and the the gain enable bit moved to accommodate this extension Signed-off-by:
Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20190905120120.31752-9-jbrunet@baylibre.comSigned-off-by:
-
Jerome Brunet authored
On sm1, the maximum number TODDR inputs is extended to 16. Signed-off-by:
-
Jerome Brunet authored
On sm1, the output routing bits have moved to CTRL2 register Signed-off-by:
-
Jerome Brunet authored
The TDMIN component, as it, has a maximum of 16 input. Depending on the SoC, these may not all be connected. Instead of decribing only the connected inputs of each SoC, describe them all and let ASoC routing do the rest. Signed-off-by:
-
Jerome Brunet authored
The TODDR component, as it, has a maximum of 8 input. Depending on the SoC, these may not all be connected or some input components may not be supported Instead of decribing only the connected inputs, describe them all and let ASoC routing do the rest. Signed-off-by:
-
