Intel Maple Ridge and Tiger Lake connection manager firmware implements
a USB4 router operation proxy that should be used instead of direct
register access to avoid races with the firmware. This is supported in
all firmwares where the protocol version field returned in the driver
ready response is 3 (or higher).

This adds the USB4 router proxy operations support to the driver so that
we first check the protocol version and if it is 3 (or higher) the USB4
router operation is run through the firmware provided proxy. Otherwise
the native version is used.

Most USB4 router proxy operations are pretty straightforward except
NVM_AUTH where the firmware only responds once the router is restarted
but before it sends device connected notification. To support this we
split the operation so that the reply is received asynchronously and
stored to struct icm. This last reply is then returned in
icm_usb4_switch_nvm_authenticate_status() if available.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>

We are going to use these in subsequent patch so make them available
outside of usb4.c.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>

Intel USB4 host routers that run the firmware based connection manager
(ICM) may implement a proxy for USB4 router operations. This is to avoid
the firmware to race with the OS driver, as both may need to run these
operations.

This adds two new connection manager specific callbacks which, if
provided, get called instead of the native USB4 router operation.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>

We are going to make usb4_switch_op() to match better the corresponding
firmware (ICM) USB4 router operation proxy interface, so that we can use
either based on the connection manager implementation.

For this reason rename usb4_switch_op() to __usb4_switch_op() that
provides the most complete interface. Then make usb4_switch_op() and
usb4_switch_op_data() call it with correct set of parameters and update
the callers accordingly.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>

We are going to make usb4_switch_op() to match better the corresponding
firmware (ICM) USB4 router operation proxy interface, so that we can use
either based on the connection manager implementation. For this reason
pass metadata directly to usb4_switch_op().
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>

The currect code expects that the router returns back the status of the
NVM authentication immediately. When tested against a real USB4 device
what happens is that the router is reset and only after that the result
is updated in the ROUTER_CS_26 register status field. This also seems to
align better what the spec suggests.

For this reason do the same what we already do with the Thunderbolt 3
devices and perform the NVM upgrade in two phases. First start the
NVM_AUTH router operation and once the router is added back after the
reset read the status in ROUTER_CS_26 and expose it to the userspace
accordingly.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>

This allows the calling code to distinguish if the error was due to
ERR_CONN (adapter is disconneced or disabled) or something else. Will be
needed in USB4 router NVM update in the following patch.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>

When doing device firmware upgrade the device will disconnect for a
while and then reconnect back. Keep the parent device (and the whole
domain) powered for a while so we don't need to runtime resume
immediately when the device is connected back after the device upgrade
completes.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>

This makes it consistent with other debug logs that already are using
decimal number for adapters (ports).
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>

This makes it easier to figure out whether the driver is using firmware
or software based connection manager implementation.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>

This makes the kernel-doc to match the ordering and also this is better
place for it, not between upstream_port and vnd_cap that are used
together.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>

I will be maintaining the Thunderbolt DMA traffic test driver.
Signed-off-by: Isaac Hazan <isaac.hazan@intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Yehezkel Bernat <YehezkelShB@gmail.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This driver allows sending DMA traffic over XDomain connection.
Specifically over a loopback connection using either a Thunderbolt/USB4
cable that is connected back to the host router port, or a special
loopback dongle that has RX and TX lines crossed. This can be useful at
manufacturing floor to check whether Thunderbolt/USB4 ports are
functional.

The driver exposes debugfs directory under the XDomain service that can
be used to configure the driver, start the test and check the results.

If a loopback dongle is used the steps to send and receive 1000 packets
can be done like:

  # modprobe thunderbolt_dma_test
  # echo 1000 > /sys/kernel/debug/thunderbolt/<service_id>/dma_test/packets_to_receive
  # echo 1000 > /sys/kernel/debug/thunderbolt/<service_id>/dma_test/packets_to_send
  # echo 1 > /sys/kernel/debug/thunderbolt/<service_id>/dma_test/test
  # cat /sys/kernel/debug/thunderbolt/<service_id>/dma_test/status

When a cable is connected back to host then there are two Thunderbolt
services, one is configured for receiving (does not matter which one):

  # modprobe thunderbolt_dma_test
  # echo 1000 > /sys/kernel/debug/thunderbolt/<service_a>/dma_test/packets_to_receive
  # echo 1 > /sys/kernel/debug/thunderbolt/<service_a>/dma_test/test

The other one for sending:

  # echo 1000 > /sys/kernel/debug/thunderbolt/<service_b>/dma_test/packets_to_send
  # echo 1 > /sys/kernel/debug/thunderbolt/<service_b>/dma_test/test

Results can be read from both services status attributes.
Signed-off-by: Isaac Hazan <isaac.hazan@intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Yehezkel Bernat <YehezkelShB@gmail.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB4 spec defines end-to-end (E2E) flow control that can be used between
hosts to prevent overflow of a RX ring. We previously had this partially
implemented but that code was removed with commit 53f13319
("thunderbolt: Get rid of E2E workaround") with the idea that we add it
back properly if there ever is need. Now that we are going to add DMA
traffic test driver (in subsequent patches) this can be useful.

For this reason we modify tb_ring_alloc_rx/tx() so that they accept
RING_FLAG_E2E and configure the hardware ring accordingly. The RX side
also requires passing TX HopID (e2e_tx_hop) used in the credit grant
packets.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Yehezkel Bernat <YehezkelShB@gmail.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

With DMA tunnels it is possible that the service using it does not
require bi-directional paths so make RX and TX optional (but of course
one of them needs to be set).
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Yehezkel Bernat <YehezkelShB@gmail.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This allows service drivers to use it as parent directory if they need
to add their own debugfs entries.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Yehezkel Bernat <YehezkelShB@gmail.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

These can be used by service drivers to enable and disable lane bonding
as needed.
Signed-off-by: Isaac Hazan <isaac.hazan@intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Yehezkel Bernat <YehezkelShB@gmail.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Link speed and link width are needed for checking expected values in
case of using a loopback service.
Signed-off-by: Isaac Hazan <isaac.hazan@intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Yehezkel Bernat <YehezkelShB@gmail.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

It is perfectly possible to have loops back from the routers to the
host, or even from one host port to another. Instead of ignoring these,
we create XDomain devices for each. This allows creating services such
as DMA traffic test that is used in manufacturing for example.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Yehezkel Bernat <YehezkelShB@gmail.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

We are going to represent loops back to the host also as XDomains and
they all have the same (host) UUID, so finding them needs to use route
string instead. This also requires that we check if the XDomain device
is added to the bus before its properties can be updated. Otherwise the
remote UUID might not be populated yet.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Yehezkel Bernat <YehezkelShB@gmail.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

These fields are marked as vendor defined in the USB4 spec and should
not be modified by the software, so only clear them when we are dealing
with pre-USB4 hardware.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Yehezkel Bernat <YehezkelShB@gmail.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'driver-core-5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core documentation fixes from Greg KH:
 "Some small Documentation fixes that were fallout from the larger
  documentation update we did in 5.10-rc2.

  Nothing major here at all, but all of these have been in linux-next
  and resolve build warnings when building the documentation files"

* tag 'driver-core-5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  Documentation: remove mic/index from misc-devices/index.rst
  scripts: get_api.pl: Add sub-titles to ABI output
  scripts: get_abi.pl: Don't let ABI files to create subtitles
  docs: leds: index.rst: add a missing file
  docs: ABI: sysfs-class-net: fix a typo
  docs: ABI: sysfs-driver-dma-ioatdma: what starts with /sys

Pull tty/serial fixes from Greg KH:
 "Here are a small number of small tty and serial fixes for some
  reported problems for the tty core, vt code, and some serial drivers.

  They include fixes for:

   - a buggy and obsolete vt font ioctl removal

   - 8250_mtk serial baudrate runtime warnings

   - imx serial earlycon build configuration fix

   - txx9 serial driver error path cleanup issues

   - tty core fix in release_tty that can be triggered by trying to bind
     an invalid serial port name to a speakup console device

  Almost all of these have been in linux-next without any problems, the
  only one that hasn't, just deletes code :)"

* tag 'tty-5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  vt: Disable KD_FONT_OP_COPY
  tty: fix crash in release_tty if tty->port is not set
  serial: txx9: add missing platform_driver_unregister() on error in serial_txx9_init
  tty: serial: imx: enable earlycon by default if IMX_SERIAL_CONSOLE is enabled
  serial: 8250_mtk: Fix uart_get_baud_rate warning

Pull USB fixes from Greg KH:
 "Here are some small USB fixes and new device ids:

   - USB gadget fixes for some reported issues

   - Fixes for the ever-troublesome apple fastcharge driver, hopefully
     we finally have it right.

   - More USB core quirks for odd devices

   - USB serial driver fixes for some long-standing issues that were
     recently found

   - some new USB serial driver device ids

  All have been in linux-next with no reported issues"

* tag 'usb-5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  USB: apple-mfi-fastcharge: fix reference leak in apple_mfi_fc_set_property
  usb: mtu3: fix panic in mtu3_gadget_stop()
  USB: serial: option: add Telit FN980 composition 0x1055
  USB: serial: option: add LE910Cx compositions 0x1203, 0x1230, 0x1231
  USB: serial: cyberjack: fix write-URB completion race
  USB: Add NO_LPM quirk for Kingston flash drive
  USB: serial: option: add Quectel EC200T module support
  usb: raw-gadget: fix memory leak in gadget_setup
  usb: dwc2: Avoid leaving the error_debugfs label unused
  usb: dwc3: ep0: Fix delay status handling
  usb: gadget: fsl: fix null pointer checking
  usb: gadget: goku_udc: fix potential crashes in probe
  usb: dwc3: pci: add support for the Intel Alder Lake-S

current->group_leader->exit_signal may change during copy_process() if
current->real_parent exits.

Move the assignment inside tasklist_lock to avoid the race.
Signed-off-by: Eddy Wu <eddy_wu@trendmicro.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

It's buggy:

On Fri, Nov 06, 2020 at 10:30:08PM +0800, Minh Yuan wrote:
> We recently discovered a slab-out-of-bounds read in fbcon in the latest
> kernel ( v5.10-rc2 for now ).  The root cause of this vulnerability is that
> "fbcon_do_set_font" did not handle "vc->vc_font.data" and
> "vc->vc_font.height" correctly, and the patch
> <https://lkml.org/lkml/2020/9/27/223> for VT_RESIZEX can't handle this
> issue.
>
> Specifically, we use KD_FONT_OP_SET to set a small font.data for tty6, and
> use  KD_FONT_OP_SET again to set a large font.height for tty1. After that,
> we use KD_FONT_OP_COPY to assign tty6's vc_font.data to tty1's vc_font.data
> in "fbcon_do_set_font", while tty1 retains the original larger
> height. Obviously, this will cause an out-of-bounds read, because we can
> access a smaller vc_font.data with a larger vc_font.height.

Further there was only one user ever.
- Android's loadfont, busybox and console-tools only ever use OP_GET
  and OP_SET
- fbset documentation only mentions the kernel cmdline font: option,
  not anything else.
- systemd used OP_COPY before release 232 published in Nov 2016

Now unfortunately the crucial report seems to have gone down with
gmane, and the commit message doesn't say much. But the pull request
hints at OP_COPY being broken

https://github.com/systemd/systemd/pull/3651

So in other words, this never worked, and the only project which
foolishly every tried to use it, realized that rather quickly too.

Instead of trying to fix security issues here on dead code by adding
missing checks, fix the entire thing by removing the functionality.

Note that systemd code using the OP_COPY function ignored the return
value, so it doesn't matter what we're doing here really - just in
case a lone server somewhere happens to be extremely unlucky and
running an affected old version of systemd. The relevant code from
font_copy_to_all_vcs() in systemd was:

	/* copy font from active VT, where the font was uploaded to */
	cfo.op = KD_FONT_OP_COPY;
	cfo.height = vcs.v_active-1; /* tty1 == index 0 */
	(void) ioctl(vcfd, KDFONTOP, &cfo);

Note this just disables the ioctl, garbage collecting the now unused
callbacks is left for -next.

v2: Tetsuo found the old mail, which allowed me to find it on another
archive. Add the link too.
Acked-by: Peilin Ye <yepeilin.cs@gmail.com>
Reported-by: Minh Yuan <yuanmingbuaa@gmail.com>
References: https://lists.freedesktop.org/archives/systemd-devel/2016-June/036935.html
References: https://github.com/systemd/systemd/pull/3651
Cc: Greg KH <greg@kroah.com>
Cc: Peilin Ye <yepeilin.cs@gmail.com>
Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://lore.kernel.org/r/20201108153806.3140315-1-daniel.vetter@ffwll.chSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull xfs fixes from Darrick Wong:

 - Fix an uninitialized struct problem

 - Fix an iomap problem zeroing unwritten EOF blocks

 - Fix some clumsy error handling when writeback fails on filesystems
   with blocksize < pagesize

 - Fix a retry loop not resetting loop variables properly

 - Fix scrub flagging rtinherit inodes on a non-rt fs, since the kernel
   actually does permit that combination

 - Fix excessive page cache flushing when unsharing part of a file

* tag 'xfs-5.10-fixes-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: only flush the unshared range in xfs_reflink_unshare
  xfs: fix scrub flagging rtinherit even if there is no rt device
  xfs: fix missing CoW blocks writeback conversion retry
  iomap: clean up writeback state logic on writepage error
  iomap: support partial page discard on writeback block mapping failure
  xfs: flush new eof page on truncate to avoid post-eof corruption
  xfs: set xefi_discard when creating a deferred agfl free log intent item

Merge procfs splice read fixes from Christoph Hellwig:
 "Greg reported a problem due to the fact that Android tests use procfs
  files to test splice, which stopped working with the changes for
  set_fs() removal.

  This series adds read_iter support for seq_file, and uses those for
  various proc files using seq_file to restore splice read support"

[ Side note: Christoph initially had a scripted "move everything over"
  patch, which looks fine, but I personally would prefer us to actively
  discourage splice() on random files.  So this does just the minimal
  basic core set of proc file op conversions.

  For completeness, and in case people care, that script was

     sed -i -e 's/\.proc_read\(\s*=\s*\)seq_read/\.proc_read_iter\1seq_read_iter/g'

  but I'll wait and see if somebody has a strong argument for using
  splice on random small /proc files before I'd run it on the whole
  kernel.   - Linus ]

* emailed patches from Christoph Hellwig <hch@lst.de>:
  proc "seq files": switch to ->read_iter
  proc "single files": switch to ->read_iter
  proc/stat: switch to ->read_iter
  proc/cpuinfo: switch to ->read_iter
  proc: wire up generic_file_splice_read for iter ops
  seq_file: add seq_read_iter

Pull x86 fixes from Thomas Gleixner:
 "A set of x86 fixes:

   - Use SYM_FUNC_START_WEAK in the mem* ASM functions instead of a
     combination of .weak and SYM_FUNC_START_LOCAL which makes LLVMs
     integrated assembler upset

   - Correct the mitigation selection logic which prevented the related
     prctl to work correctly

   - Make the UV5 hubless system work correctly by fixing up the
     malformed table entries and adding the missing ones"

* tag 'x86-urgent-2020-11-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/platform/uv: Recognize UV5 hubless system identifier
  x86/platform/uv: Remove spaces from OEM IDs
  x86/platform/uv: Fix missing OEM_TABLE_ID
  x86/speculation: Allow IBPB to be conditionally enabled on CPUs with always-on STIBP
  x86/lib: Change .weak to SYM_FUNC_START_WEAK for arch/x86/lib/mem*_64.S

Pull perf fix from Thomas Gleixner:
 "A single fix for the perf core plugging a memory leak in the address
  filter parser"

* tag 'perf-urgent-2020-11-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/core: Fix a memory leak in perf_event_parse_addr_filter()

Pull futex fix from Thomas Gleixner:
 "A single fix for the futex code where an intermediate state in the
  underlying RT mutex was not handled correctly and triggering a BUG()
  instead of treating it as another variant of retry condition"

* tag 'locking-urgent-2020-11-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  futex: Handle transient "ownerless" rtmutex state correctly

Pull irq fixes from Thomas Gleixner:
 "A set of fixes for interrupt chip drivers:

   - Fix the fallout of the IPI as interrupt conversion in Kconfig and
     the BCM2836 interrupt chip driver

   - Fixes for interrupt affinity setting and the handling of
     hierarchical irq domains in the SiFive PLIC driver

   - Make the unmapped event handling in the TI SCI driver work
     correctly

   - A few minor fixes and cleanups in various chip drivers and Kconfig"

* tag 'irq-urgent-2020-11-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  dt-bindings: irqchip: ti, sci-inta: Fix diagram indentation for unmapped events
  irqchip/ti-sci-inta: Add support for unmapped event handling
  dt-bindings: irqchip: ti, sci-inta: Update for unmapped event handling
  irqchip/renesas-intc-irqpin: Merge irlm_bit and needs_irlm
  irqchip/sifive-plic: Fix chip_data access within a hierarchy
  irqchip/sifive-plic: Fix broken irq_set_affinity() callback
  irqchip/stm32-exti: Add all LP timer exti direct events support
  irqchip/bcm2836: Fix missing __init annotation
  irqchip/mips: Drop selection of IRQ_DOMAIN_HIERARCHY
  irqchip/mst: Make mst_intc_of_init static
  irqchip/mst: MST_IRQ should depend on ARCH_MEDIATEK or ARCH_MSTARV7
  genirq: Let GENERIC_IRQ_IPI select IRQ_DOMAIN_HIERARCHY

Pull entry code fix from Thomas Gleixner:
 "A single fix for the generic entry code to correct the wrong
  assumption that the lockdep interrupt state needs not to be
  established before calling the RCU check"

* tag 'core-urgent-2020-11-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  entry: Fix the incorrect ordering of lockdep and RCU check

Pull powerpc fixes from Michael Ellerman:

 - fix miscompilation with GCC 4.9 by using asm_goto_volatile for put_user()

 - fix for an RCU splat at boot caused by a recent lockdep change

 - fix for a possible deadlock in our EEH debugfs code

 - several fixes for handling of _PAGE_ACCESSED on 32-bit platforms

 - build fix when CONFIG_NUMA=n

Thanks to Andreas Schwab, Christophe Leroy, Oliver O'Halloran, Qian Cai,
and Scott Cheloha.

* tag 'powerpc-5.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/numa: Fix build when CONFIG_NUMA=n
  powerpc/8xx: Manage _PAGE_ACCESSED through APG bits in L1 entry
  powerpc/8xx: Always fault when _PAGE_ACCESSED is not set
  powerpc/40x: Always fault when _PAGE_ACCESSED is not set
  powerpc/603: Always fault when _PAGE_ACCESSED is not set
  powerpc: Use asm_goto_volatile for put_user()
  powerpc/smp: Call rcu_cpu_starting() earlier
  powerpc/eeh_cache: Fix a possible debugfs deadlock

Pull block fixes from Jens Axboe:

 - NVMe pull request from Christoph:
    - revert a nvme_queue size optimization (Keith Bush)
    - fabrics timeout races fixes (Chao Leng and Sagi Grimberg)"

 - null_blk zone locking fix (Damien)

* tag 'block-5.10-2020-11-07' of git://git.kernel.dk/linux-block:
  null_blk: Fix scheduling in atomic with zoned mode
  nvme-tcp: avoid repeated request completion
  nvme-rdma: avoid repeated request completion
  nvme-tcp: avoid race between time out and tear down
  nvme-rdma: avoid race between time out and tear down
  nvme: introduce nvme_sync_io_queues
  Revert "nvme-pci: remove last_sq_tail"

Pull io_uring fixes from Jens Axboe:
 "A set of fixes for io_uring:

   - SQPOLL cancelation fixes

   - Two fixes for the io_identity COW

   - Cancelation overflow fix (Pavel)

   - Drain request cancelation fix (Pavel)

   - Link timeout race fix (Pavel)"

* tag 'io_uring-5.10-2020-11-07' of git://git.kernel.dk/linux-block:
  io_uring: fix link lookup racing with link timeout
  io_uring: use correct pointer for io_uring_show_cred()
  io_uring: don't forget to task-cancel drained reqs
  io_uring: fix overflowed cancel w/ linked ->files
  io_uring: drop req/tctx io_identity separately
  io_uring: ensure consistent view of original task ->mm from SQPOLL
  io_uring: properly handle SQPOLL request cancelations
  io-wq: cancel request if it's asking for files and we don't have them

Gratian managed to trigger the BUG_ON(!newowner) in fixup_pi_state_owner().
This is one possible chain of events leading to this:

Task Prio       Operation
T1   120	lock(F)
T2   120	lock(F)   -> blocks (top waiter)
T3   50 (RT)	lock(F)   -> boosts T1 and blocks (new top waiter)
XX   		timeout/  -> wakes T2
		signal
T1   50		unlock(F) -> wakes T3 (rtmutex->owner == NULL, waiter bit is set)
T2   120	cleanup   -> try_to_take_mutex() fails because T3 is the top waiter
     			     and the lower priority T2 cannot steal the lock.
     			  -> fixup_pi_state_owner() sees newowner == NULL -> BUG_ON()

The comment states that this is invalid and rt_mutex_real_owner() must
return a non NULL owner when the trylock failed, but in case of a queued
and woken up waiter rt_mutex_real_owner() == NULL is a valid transient
state. The higher priority waiter has simply not yet managed to take over
the rtmutex.

The BUG_ON() is therefore wrong and this is just another retry condition in
fixup_pi_state_owner().

Drop the locks, so that T3 can make progress, and then try the fixup again.

Gratian provided a great analysis, traces and a reproducer. The analysis is
to the point, but it confused the hell out of that tglx dude who had to
page in all the futex horrors again. Condensed version is above.

[ tglx: Wrote comment and changelog ]

Fixes: c1e2f0ea ("futex: Avoid violating the 10th rule of futex")
Reported-by: Gratian Crisan <gratian.crisan@ni.com>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/87a6w6x7bb.fsf@ni.com
Link: https://lore.kernel.org/r/87sg9pkvf7.fsf@nanos.tec.linutronix.de

Pull i2c fixes from Wolfram Sang:
 "Driver bugfixes for I2C.

  Most of them are for the new mlxbf driver which got more exposure
  after rc1. The sh_mobile patch should already have reached you during
  the merge window, but I accidently dropped it. However, since it fixes
  a problem with rebooting, it is still fine for rc3"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: designware: slave should do WRITE_REQUESTED before WRITE_RECEIVED
  i2c: designware: call i2c_dw_read_clear_intrbits_slave() once
  i2c: mlxbf: I2C_MLXBF should depend on MELLANOX_PLATFORM
  i2c: mlxbf: Update author and maintainer email info
  i2c: mlxbf: Update reference clock frequency
  i2c: mlxbf: Remove unecessary wrapper functions
  i2c: mlxbf: Fix resrticted cast warning of sparse
  i2c: mlxbf: Add CONFIG_ACPI to guard ACPI function call
  i2c: sh_mobile: implement atomic transfers
  i2c: mediatek: move dma reset before i2c reset

Pull RISC-V fixes from Palmer Dabbelt:

 - SPDX comment style fix

 - ignore memory that is unusable

 - avoid setting a kernel text offset for the !MMU kernels, where
   skipping the first page of memory is both unnecessary and costly

 - avoid passing the flag bits in satp to pfn_to_virt()

 - fix __put_kernel_nofault, where we had the arguments to
   __put_user_nocheck reversed

 - workaround for a bug in the FU540 to avoid triggering PMP issues
   during early boot

 - change to how we pull symbols out of the vDSO. The old mechanism was
   removed from binutils-2.35 (and has been backported to Debian's 2.34)

* tag 'riscv-for-linus-5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  RISC-V: Fix the VDSO symbol generaton for binutils-2.35+
  RISC-V: Use non-PGD mappings for early DTB access
  riscv: uaccess: fix __put_kernel_nofault()
  riscv: fix pfn_to_virt err in do_page_fault().
  riscv: Set text_offset correctly for M-Mode
  RISC-V: Remove any memblock representing unusable memory area
  risc-v: kernel: ftrace: Fixes improper SPDX comment style