- 27 May, 2020 6 commits
-
-
Roberto Sassu authored
[ Upstream commit 0014cc04 ] Commit a408e4a8 ("ima: open a new file instance if no read permissions") tries to create a new file descriptor to calculate a file digest if the file has not been opened with O_RDONLY flag. However, if a new file descriptor cannot be obtained, it sets the FMODE_READ flag to file->f_flags instead of file->f_mode. This patch fixes this issue by replacing f_flags with f_mode as it was before that commit. Cc: stable@vger.kernel.org # 4.20.x Fixes: a408e4a8 ("ima: open a new file instance if no read permissions") Signed-off-by:
Roberto Sassu <roberto.sassu@huawei.com> Reviewed-by:
Goldwyn Rodrigues <rgoldwyn@suse.com> Signed-off-by:
Mimi Zohar <zohar@linux.ibm.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Vincent Chen authored
commit c749bb2d upstream. The current max_pfn equals to zero. In this case, I found it caused users cannot get some page information through /proc such as kpagecount in v5.6 kernel because of new sanity checks. The following message is displayed by stress-ng test suite with the command "stress-ng --verbose --physpage 1 -t 1" on HiFive unleashed board. # stress-ng --verbose --physpage 1 -t 1 stress-ng: debug: [109] 4 processors online, 4 processors configured stress-ng: info: [109] dispatching hogs: 1 physpage stress-ng: debug: [109] cache allocate: reducing cache level from L3 (too high) to L0 stress-ng: debug: [109] get_cpu_cache: invalid cache_level: 0 stress-ng: info: [109] cache allocate: using built-in defaults as no suitable cache found stress-ng: debug: [109] cache allocate: default cache size: 2048K stress-ng: debug: [109] starting stressors stress-ng: debug: [109] 1 stressor spawned stress-ng: debug: [110] stress-ng-physpage: started [110] (instance 0) stress-ng: error: [110] stress-ng-physpage: cannot read page count for address 0x3fd34de000 in /proc/kpagecount, errno=0 (Success) stress-ng: error: [110] stress-ng-physpage: cannot read page count for address 0x3fd32db078 in /proc/kpagecount, errno=0 (Success) ... stress-ng: error: [110] stress-ng-physpage: cannot read page count for address 0x3fd32db078 in /proc/kpagecount, errno=0 (Success) stress-ng: debug: [110] stress-ng-physpage: exited [110] (instance 0) stress-ng: debug: [109] process [110] terminated stress-ng: info: [109] successful run completed in 1.00s # After applying this patch, the kernel can pass the test. # stress-ng --verbose --physpage 1 -t 1 stress-ng: debug: [104] 4 processors online, 4 processors configured stress-ng: info: [104] dispatching hogs: 1 physpage stress-ng: info: [104] cache allocate: using defaults, can't determine cache details from sysfs stress-ng: debug: [104] cache allocate: default cache size: 2048K stress-ng: debug: [104] starting stressors stress-ng: debug: [104] 1 stressor spawned stress-ng: debug: [105] stress-ng-physpage: started [105] (instance 0) stress-ng: debug: [105] stress-ng-physpage: exited [105] (instance 0) stress-ng: debug: [104] process [105] terminated stress-ng: info: [104] successful run completed in 1.01s # Cc: stable@vger.kernel.org Signed-off-by:
Vincent Chen <vincent.chen@sifive.com> Reviewed-by:
Anup Patel <anup@brainfault.org> Reviewed-by:
Yash Shah <yash.shah@sifive.com> Tested-by:
Palmer Dabbelt <palmerdabbelt@google.com> [Palmer: back-ported to 4.19] Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Miaohe Lin authored
commit d80b64ff upstream. When kmalloc memory for sd->sev_vmcbs failed, we forget to free the page held by sd->save_area. Also get rid of the var r as '-ENOMEM' is actually the only possible outcome here. Reviewed-by:
Liran Alon <liran.alon@oracle.com> Reviewed-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by:
Miaohe Lin <linmiaohe@huawei.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by:
-
Kevin Hao authored
commit 1413ef63 upstream. The struct cdev is embedded in the struct i2c_dev. In the current code, we would free the i2c_dev struct directly in put_i2c_dev(), but the cdev is manged by a kobject, and the release of it is not predictable. So it is very possible that the i2c_dev is freed before the cdev is entirely released. We can easily get the following call trace with CONFIG_DEBUG_KOBJECT_RELEASE and CONFIG_DEBUG_OBJECTS_TIMERS enabled. ODEBUG: free active (active state 0) object type: timer_list hint: delayed_work_timer_fn+0x0/0x38 WARNING: CPU: 19 PID: 1 at lib/debugobjects.c:325 debug_print_object+0xb0/0xf0 Modules linked in: CPU: 19 PID: 1 Comm: swapper/0 Tainted: G W 5.2.20-yocto-standard+ #120 Hardware name: Marvell OcteonTX CN96XX board (DT) pstate: 80c00089 (Nzcv daIf +PAN +UAO) pc : debug_print_object+0xb0/0xf0 lr : debug_print_object+0xb0/0xf0 sp : ffff00001292f7d0 x29: ffff00001292f7d0 x28: ffff800b82151788 x27: 0000000000000001 x26: ffff800b892c0000 x25: ffff0000124a2558 x24: 0000000000000000 x23: ffff00001107a1d8 x22: ffff0000116b5088 x21: ffff800bdc6afca8 x20: ffff000012471ae8 x19: ffff00001168f2c8 x18: 0000000000000010 x17: 00000000fd6f304b x16: 00000000ee79de43 x15: ffff800bc0e80568 x14: 79616c6564203a74 x13: 6e6968207473696c x12: 5f72656d6974203a x11: ffff0000113f0018 x10: 0000000000000000 x9 : 000000000000001f x8 : 0000000000000000 x7 : ffff0000101294cc x6 : 0000000000000000 x5 : 0000000000000000 x4 : 0000000000000001 x3 : 00000000ffffffff x2 : 0000000000000000 x1 : 387fc15c8ec0f200 x0 : 0000000000000000 Call trace: debug_print_object+0xb0/0xf0 __debug_check_no_obj_freed+0x19c/0x228 debug_check_no_obj_freed+0x1c/0x28 kfree+0x250/0x440 put_i2c_dev+0x68/0x78 i2cdev_detach_adapter+0x60/0xc8 i2cdev_notifier_call+0x3c/0x70 notifier_call_chain+0x8c/0xe8 blocking_notifier_call_chain+0x64/0x88 device_del+0x74/0x380 device_unregister+0x54/0x78 i2c_del_adapter+0x278/0x2d0 unittest_i2c_bus_remove+0x3c/0x80 platform_drv_remove+0x30/0x50 device_release_driver_internal+0xf4/0x1c0 driver_detach+0x58/0xa0 bus_remove_driver+0x84/0xd8 driver_unregister+0x34/0x60 platform_driver_unregister+0x20/0x30 of_unittest_overlay+0x8d4/0xbe0 of_unittest+0xae8/0xb3c do_one_initcall+0xac/0x450 do_initcall_level+0x208/0x224 kernel_init_freeable+0x2d8/0x36c kernel_init+0x18/0x108 ret_from_fork+0x10/0x1c irq event stamp: 3934661 hardirqs last enabled at (3934661): [<ffff00001009fa04>] debug_exception_exit+0x4c/0x58 hardirqs last disabled at (3934660): [<ffff00001009fb14>] debug_exception_enter+0xa4/0xe0 softirqs last enabled at (3934654): [<ffff000010081d94>] __do_softirq+0x46c/0x628 softirqs last disabled at (3934649): [<ffff0000100b4a1c>] irq_exit+0x104/0x118 This is a common issue when using cdev embedded in a struct. Fortunately, we already have a mechanism to solve this kind of issue. Please see commit 233ed09d ("chardev: add helper function to register char devs with a struct device") for more detail. In this patch, we choose to embed the struct device into the i2c_dev, and use the API provided by the commit 233ed09d to make sure that the release of i2c_dev and cdev are in sequence. Signed-off-by:
Kevin Hao <haokexin@gmail.com> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by:
-
Arnd Bergmann authored
commit af700eae upstream. objtool points out several conditions that it does not like, depending on the combination with other configuration options and compiler variants: stack protector: lib/ubsan.o: warning: objtool: __ubsan_handle_type_mismatch()+0xbf: call to __stack_chk_fail() with UACCESS enabled lib/ubsan.o: warning: objtool: __ubsan_handle_type_mismatch_v1()+0xbe: call to __stack_chk_fail() with UACCESS enabled stackleak plugin: lib/ubsan.o: warning: objtool: __ubsan_handle_type_mismatch()+0x4a: call to stackleak_track_stack() with UACCESS enabled lib/ubsan.o: warning: objtool: __ubsan_handle_type_mismatch_v1()+0x4a: call to stackleak_track_stack() with UACCESS enabled kasan: lib/ubsan.o: warning: objtool: __ubsan_handle_type_mismatch()+0x25: call to memcpy() with UACCESS enabled lib/ubsan.o: warning: objtool: __ubsan_handle_type_mismatch_v1()+0x25: call to memcpy() with UACCESS enabled The stackleak and kasan options just need to be disabled for this file as we do for other files already. For the stack protector, we already attempt to disable it, but this fails on clang because the check is mixed with the gcc specific -fno-conserve-stack option. According to Andrey Ryabinin, that option is not even needed, dropping it here fixes the stackprotector issue. Link: http://lkml.kernel.org/r/20190722125139.1335385-1-arnd@arndb.de Link: https://lore.kernel.org/lkml/20190617123109.667090-1-arnd@arndb.de/t/ Link: https://lore.kernel.org/lkml/20190722091050.2188664-1-arnd@arndb.de/t/ Fixes: d08965a2 ("x86/uaccess, ubsan: Fix UBSAN vs. SMAP") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Reviewed-by:
Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Peter Zijlstra authored
commit d08965a2 upstream. UBSAN can insert extra code in random locations; including AC=1 sections. Typically this code is not safe and needs wrapping. So far, only __ubsan_handle_type_mismatch* have been observed in AC=1 sections and therefore only those are annotated. Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
Ingo Molnar <mingo@kernel.org> [stable backport: only take the lib/Makefile change to resolve gcc-10 build issues] Signed-off-by:
-
- 20 May, 2020 34 commits
-
-
Greg Kroah-Hartman authored
-
Sergei Trofimovich authored
commit b1112139 upstream. gcc-10 will rename --param=allow-store-data-races=0 to -fno-allow-store-data-races. The flag change happened at https://gcc.gnu.org/PR92046. Signed-off-by:
Sergei Trofimovich <slyfox@gentoo.org> Acked-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
Masahiro Yamada <masahiroy@kernel.org> Cc: Thomas Backlund <tmb@mageia.org> Signed-off-by:
-
Jim Mattson authored
commit c4e0e4ab upstream. Bank_num is a one-based count of banks, not a zero-based index. It overflows the allocated space only when strictly greater than KVM_MAX_MCE_BANKS. Fixes: a9e38c3e ("KVM: x86: Catch potential overrun in MCE setup") Signed-off-by:
Jue Wang <juew@google.com> Signed-off-by:
Jim Mattson <jmattson@google.com> Reviewed-by:
Peter Shier <pshier@google.com> Message-Id: <20200511225616.19557-1-jmattson@google.com> Reviewed-by:
-
Geert Uytterhoeven authored
commit e47cb97f upstream. The Clock Pulse Generator (CPG) device node lacks the extal2 clock. This may lead to a failure registering the "r" clock, or to a wrong parent for the "usb24s" clock, depending on MD_CK2 pin configuration and boot loader CPG_USBCKCR register configuration. This went unnoticed, as this does not affect the single upstream board configuration, which relies on the first clock input only. Fixes: d9ffd583 ("ARM: shmobile: r8a7740: add SoC clocks to DTS") Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by:
Ulrich Hecht <uli+renesas@fpond.eu> Link: https://lore.kernel.org/r/20200508095918.6061-1-geert+renesas@glider.beSigned-off-by:
-
Yoshihiro Shimoda authored
commit f4d71c6e upstream. Missing the renesas,ipmmu-main property on ipmmu_vip[01] nodes. Fixes: 55697cbb ("arm64: dts: renesas: r8a779{65,80,90}: Add IPMMU devices nodes) Signed-off-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/1587108543-23786-1-git-send-email-yoshihiro.shimoda.uh@renesas.comSigned-off-by:
-
Geert Uytterhoeven authored
commit 0f739fdf upstream. The R-Mobile APE6 Compare Match Timer 1 generates 8 interrupts, one for each channel, but currently only 1 is described. Fix this by adding the missing interrupts. Fixes: f7b65230 ("ARM: shmobile: r8a73a4: Add CMT1 node") Signed-off-by:
-
Chen-Yu Tsai authored
commit 190c7f6f upstream. The device tree compiler complains that the dwc3 nodes have regs properties but no matching unit addresses. Add the unit addresses to the device node name. While at it, also rename the nodes from "dwc3" to "usb", as guidelines require device nodes have generic names. Fixes: 7144224f ("arm64: dts: rockchip: support dwc3 USB for rk3399") Signed-off-by:
Chen-Yu Tsai <wens@csie.org> Link: https://lore.kernel.org/r/20200327030414.5903-7-wens@kernel.orgSigned-off-by:
Heiko Stuebner <heiko@sntech.de> Signed-off-by:
-
Chen-Yu Tsai authored
commit 83b99412 upstream. In some board device tree files, "rk805" was used for the RK805 PMIC's node name. However the policy for device trees is that generic names should be used. Replace the "rk805" node name with the generic "pmic" name. Fixes: 1e28037e ("arm64: dts: rockchip: add rk805 node for rk3328-evb") Fixes: 955bebde ("arm64: dts: rockchip: add rk3328-rock64 board") Signed-off-by:
-
Marc Zyngier authored
commit 018d4671 upstream. On failing to prepare or enable a clock, remove the core structure from the list it has been inserted as it is about to be freed. This otherwise leads to random crashes when subsequent clocks get registered, during which parsing of the clock tree becomes adventurous. Observed with QEMU's RPi-3 emulation. Fixes: 12ead774 ("clk: Don't try to enable critical clocks if prepare failed") Signed-off-by:
Marc Zyngier <maz@kernel.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Stephen Boyd <sboyd@kernel.org> Cc: Michael Turquette <mturquette@baylibre.com> Link: https://lkml.kernel.org/r/20200505140953.409430-1-maz@kernel.orgSigned-off-by:
Stephen Boyd <sboyd@kernel.org> Signed-off-by:
-
Kai-Heng Feng authored
commit f41224ef upstream. This reverts commit 3b36b13d. Enable power save node breaks some systems with ACL225. Revert the patch and use a platform specific quirk for the original issue isntead. Fixes: 3b36b13d ("ALSA: hda/realtek: Fix pop noise on ALC225") BugLink: https://bugs.launchpad.net/bugs/1875916Signed-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Link: https://lore.kernel.org/r/20200503152449.22761-1-kai.heng.feng@canonical.comSigned-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Wei Yongjun authored
commit e8f7f9e3 upstream. If 'usb_otg_descriptor_alloc()' fails, we must return a negative error code -ENOMEM, not 0. Fixes: ab6796ae ("usb: gadget: cdc2: allocate and init otg descriptor by otg capabilities") Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by:
Felipe Balbi <balbi@kernel.org> Signed-off-by:
-
Wei Yongjun authored
commit e27d4b30 upstream. If 'usb_otg_descriptor_alloc()' fails, we must return a negative error code -ENOMEM, not 0. Fixes: 1156e91d ("usb: gadget: ncm: allocate and init otg descriptor by otg capabilities") Reported-by:
-
Christophe JAILLET authored
commit 19b94c1f upstream. If 'usb_otg_descriptor_alloc()' fails, we must return an error code, not 0. Fixes: 56023ce0 ("usb: gadget: audio: allocate and init otg descriptor by otg capabilities") Reviewed-by:
Peter Chen <peter.chen@nxp.com> Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
-
Christophe JAILLET authored
commit ccaef7e6 upstream. 'dev' is allocated in 'net2272_probe_init()'. It must be freed in the error handling path, as already done in the remove function (i.e. 'net2272_plat_remove()') Fixes: 90fccb52 ("usb: gadget: Gadget directory cleanup - group UDC drivers") Signed-off-by:
-
John Stultz authored
commit 00e21763 upstream. The check for the HWO flag in dwc3_gadget_ep_reclaim_trb_sg() causes us to break out of the loop before we call dwc3_gadget_ep_reclaim_completed_trb(), which is what likely should be clearing the HWO flag. This can cause odd behavior where we never reclaim all the trbs in the sg list, so we never call giveback on a usb req, and that will causes transfer stalls. This effectively resovles the adb stalls seen on HiKey960 after userland changes started only using AIO in adbd. Cc: YongQin Liu <yongqin.liu@linaro.org> Cc: Anurag Kumar Vulisha <anurag.kumar.vulisha@xilinx.com> Cc: Yang Fei <fei.yang@intel.com> Cc: Thinh Nguyen <thinhn@synopsys.com> Cc: Tejas Joglekar <tejas.joglekar@synopsys.com> Cc: Andrzej Pietrasiewicz <andrzej.p@collabora.com> Cc: Jack Pham <jackp@codeaurora.org> Cc: Josh Gao <jmgao@google.com> Cc: Todd Kjos <tkjos@google.com> Cc: Felipe Balbi <balbi@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-usb@vger.kernel.org Cc: stable@vger.kernel.org #4.20+ Signed-off-by:
John Stultz <john.stultz@linaro.org> Signed-off-by:
-
Justin Swartz authored
commit cec9d101 upstream. The following changes prevent the unrecoverable freezes and rcu_sched stall warnings experienced in each of my attempts to take advantage of lima. Replace the COMPOSITE_NOGATE definition of aclk_gpu_pre with a COMPOSITE that retains the selection of HDMIPHY as the PLL source, but instead makes uses of the aclk_gpu PLL source gate and parent names defined by mux_pll_src_4plls_p rather than mux_aclk_gpu_pre_p. Remove the now unused mux_aclk_gpu_pre_p and the four named but also unused definitions (cpll_gpu, gpll_gpu, hdmiphy_gpu and usb480m_gpu) of the aclk_gpu PLL source gate. Use the correct gate offset for aclk_gpu and aclk_gpu_noc. Fixes: 307a2e9a ("clk: rockchip: add clock controller for rk3228") Cc: stable@vger.kernel.org Signed-off-by:
Justin Swartz <justin.swartz@risingedge.co.za> [double-checked against SoC manual and added fixes tag] Link: https://lore.kernel.org/r/20200114162503.7548-1-justin.swartz@risingedge.co.zaSigned-off-by:
-
Eric W. Biederman authored
commit f87d1c95 upstream. I goofed when I added mm->user_ns support to would_dump. I missed the fact that in the case of binfmt_loader, binfmt_em86, binfmt_misc, and binfmt_script bprm->file is reassigned. Which made the move of would_dump from setup_new_exec to __do_execve_file before exec_binprm incorrect as it can result in would_dump running on the script instead of the interpreter of the script. The net result is that the code stopped making unreadable interpreters undumpable. Which allows them to be ptraced and written to disk without special permissions. Oops. The move was necessary because the call in set_new_exec was after bprm->mm was no longer valid. To correct this mistake move the misplaced would_dump from __do_execve_file into flos_old_exec, before exec_mmap is called. I tested and confirmed that without this fix I can attach with gdb to a script with an unreadable interpreter, and with this fix I can not. Cc: stable@vger.kernel.org Fixes: f84df2a6 ("exec: Ensure mm->user_ns contains the execed files") Signed-off-by:
"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
Josh Poimboeuf authored
commit 71c95825 upstream. The unwind_state 'error' field is used to inform the reliable unwinding code that the stack trace can't be trusted. Set this field for all errors in __unwind_start(). Also, move the zeroing out of the unwind_state struct to before the ORC table initialization check, to prevent the caller from reading uninitialized data if the ORC table is corrupted. Fixes: af085d90 ("stacktrace/x86: add function for detecting reliable stack traces") Fixes: d3a09104 ("x86/unwinder/orc: Dont bail on stack overflow") Fixes: 98d0c8eb ("x86/unwind/orc: Prevent unwinding before ORC initialization") Reported-by:
Pavel Machek <pavel@denx.de> Signed-off-by:
Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by:
-
Borislav Petkov authored
commit a9a3ed1e upstream. ... or the odyssey of trying to disable the stack protector for the function which generates the stack canary value. The whole story started with Sergei reporting a boot crash with a kernel built with gcc-10: Kernel panic — not syncing: stack-protector: Kernel stack is corrupted in: start_secondary CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.6.0-rc5—00235—gfffb08b3 #139 Hardware name: Gigabyte Technology Co., Ltd. To be filled by O.E.M./H77M—D3H, BIOS F12 11/14/2013 Call Trace: dump_stack panic ? start_secondary __stack_chk_fail start_secondary secondary_startup_64 -—-[ end Kernel panic — not syncing: stack—protector: Kernel stack is corrupted in: start_secondary This happens because gcc-10 tail-call optimizes the last function call in start_secondary() - cpu_startup_entry() - and thus emits a stack canary check which fails because the canary value changes after the boot_init_stack_canary() call. To fix that, the initial attempt was to mark the one function which generates the stack canary with: __attribute__((optimize("-fno-stack-protector"))) ... start_secondary(void *unused) however, using the optimize attribute doesn't work cumulatively as the attribute does not add to but rather replaces previously supplied optimization options - roughly all -fxxx options. The key one among them being -fno-omit-frame-pointer and thus leading to not present frame pointer - frame pointer which the kernel needs. The next attempt to prevent compilers from tail-call optimizing the last function call cpu_startup_entry(), shy of carving out start_secondary() into a separate compilation unit and building it with -fno-stack-protector, was to add an empty asm(""). This current solution was short and sweet, and reportedly, is supported by both compilers but we didn't get very far this time: future (LTO?) optimization passes could potentially eliminate this, which leads us to the third attempt: having an actual memory barrier there which the compiler cannot ignore or move around etc. That should hold for a long time, but hey we said that about the other two solutions too so... Reported-by:
Borislav Petkov <bp@suse.de> Tested-by:
Kalle Valo <kvalo@codeaurora.org> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20200314164451.346497-1-slyfox@gentoo.orgSigned-off-by:
-
Adam McCoy authored
commit a4813799 upstream. Failed async writes that are requeued may not clean up a refcount on the file, which can result in a leaked open. This scenario arises very reliably when using persistent handles and a reconnect occurs while writing. cifs_writev_requeue only releases the reference if the write fails (rc != 0). The server->ops->async_writev operation will take its own reference, so the initial reference can always be released. Signed-off-by:
Adam McCoy <adam@forsedomani.com> Signed-off-by:
Steve French <stfrench@microsoft.com> CC: Stable <stable@vger.kernel.org> Reviewed-by:
Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by:
-
Fabio Estevam authored
commit 0caf3435 upstream. The I2C2 pins are already used and the following errors are seen: imx27-pinctrl 10015000.iomuxc: pin MX27_PAD_I2C2_SDA already requested by 10012000.i2c; cannot claim for 1001d000.i2c imx27-pinctrl 10015000.iomuxc: pin-69 (1001d000.i2c) status -22 imx27-pinctrl 10015000.iomuxc: could not request pin 69 (MX27_PAD_I2C2_SDA) from group i2c2grp on device 10015000.iomuxc imx-i2c 1001d000.i2c: Error applying setting, reverse things back imx-i2c: probe of 1001d000.i2c failed with error -22 Fix it by adding the correct I2C1 IOMUX entries for the pinctrl_i2c1 group. Cc: <stable@vger.kernel.org> Fixes: 61664d0b ("ARM: dts: imx27 phyCARD-S pinctrl") Signed-off-by:
Fabio Estevam <festevam@gmail.com> Reviewed-by:
Stefan Riedmueller <s.riedmueller@phytec.de> Signed-off-by:
Shawn Guo <shawnguo@kernel.org> Signed-off-by:
-
Kishon Vijay Abraham I authored
commit 90d4d3f4 upstream. Even though commit cfb5d65f ("ARM: dts: dra7: Add bus_dma_limit for L3 bus") added bus_dma_limit for L3 bus, the PCIe controller gets incorrect value of bus_dma_limit. Fix it by adding empty dma-ranges property to axi@0 and axi@1 (parent device tree node of PCIe controller). Cc: stable@kernel.org Signed-off-by:
Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Sriharsha Allenki authored
commit 3c6f8cb9 upstream. On platforms with IOMMU enabled, multiple SGs can be coalesced into one by the IOMMU driver. In that case the SG list processing as part of the completion of a urb on a bulk endpoint can result into a NULL pointer dereference with the below stack dump. <6> Unable to handle kernel NULL pointer dereference at virtual address 0000000c <6> pgd = c0004000 <6> [0000000c] *pgd=00000000 <6> Internal error: Oops: 5 [#1] PREEMPT SMP ARM <2> PC is at xhci_queue_bulk_tx+0x454/0x80c <2> LR is at xhci_queue_bulk_tx+0x44c/0x80c <2> pc : [<c08907c4>] lr : [<c08907bc>] psr: 000000d3 <2> sp : ca337c80 ip : 00000000 fp : ffffffff <2> r10: 00000000 r9 : 50037000 r8 : 00004000 <2> r7 : 00000000 r6 : 00004000 r5 : 00000000 r4 : 00000000 <2> r3 : 00000000 r2 : 00000082 r1 : c2c1a200 r0 : 00000000 <2> Flags: nzcv IRQs off FIQs off Mode SVC_32 ISA ARM Segment none <2> Control: 10c0383d Table: b412c06a DAC: 00000051 <6> Process usb-storage (pid: 5961, stack limit = 0xca336210) <snip> <2> [<c08907c4>] (xhci_queue_bulk_tx) <2> [<c0881b3c>] (xhci_urb_enqueue) <2> [<c0831068>] (usb_hcd_submit_urb) <2> [<c08350b4>] (usb_sg_wait) <2> [<c089f384>] (usb_stor_bulk_transfer_sglist) <2> [<c089f2c0>] (usb_stor_bulk_srb) <2> [<c089fe38>] (usb_stor_Bulk_transport) <2> [<c089f468>] (usb_stor_invoke_transport) <2> [<c08a11b4>] (usb_stor_control_thread) <2> [<c014a534>] (kthread) The above NULL pointer dereference is the result of block_len and the sent_len set to zero after the first SG of the list when IOMMU driver is enabled. Because of this the loop of processing the SGs has run more than num_sgs which resulted in a sg_next on the last SG of the list which has SG_END set. Fix this by check for the sg before any attributes of the sg are accessed. [modified reason for null pointer dereference in commit message subject -Mathias] Fixes: f9c589e1 ("xhci: TD-fragment, align the unsplittable case with a bounce buffer") Cc: stable@vger.kernel.org Signed-off-by:
Sriharsha Allenki <sallenki@codeaurora.org> Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20200514110432.25564-2-mathias.nyman@linux.intel.comSigned-off-by:
-
Kyungtae Kim authored
commit 15753588 upstream. FuzzUSB (a variant of syzkaller) found an illegal array access using an incorrect index while binding a gadget with UDC. Reference: https://www.spinics.net/lists/linux-usb/msg194331.html This bug occurs when a size variable used for a buffer is misused to access its strcpy-ed buffer. Given a buffer along with its size variable (taken from user input), from which, a new buffer is created using kstrdup(). Due to the original buffer containing 0 value in the middle, the size of the kstrdup-ed buffer becomes smaller than that of the original. So accessing the kstrdup-ed buffer with the same size variable triggers memory access violation. The fix makes sure no zero value in the buffer, by comparing the strlen() of the orignal buffer with the size variable, so that the access to the kstrdup-ed buffer is safe. BUG: KASAN: slab-out-of-bounds in gadget_dev_desc_UDC_store+0x1ba/0x200 drivers/usb/gadget/configfs.c:266 Read of size 1 at addr ffff88806a55dd7e by task syz-executor.0/17208 CPU: 2 PID: 17208 Comm: syz-executor.0 Not tainted 5.6.8 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xce/0x128 lib/dump_stack.c:118 print_address_description.constprop.4+0x21/0x3c0 mm/kasan/report.c:374 __kasan_report+0x131/0x1b0 mm/kasan/report.c:506 kasan_report+0x12/0x20 mm/kasan/common.c:641 __asan_report_load1_noabort+0x14/0x20 mm/kasan/generic_report.c:132 gadget_dev_desc_UDC_store+0x1ba/0x200 drivers/usb/gadget/configfs.c:266 flush_write_buffer fs/configfs/file.c:251 [inline] configfs_write_file+0x2f1/0x4c0 fs/configfs/file.c:283 __vfs_write+0x85/0x110 fs/read_write.c:494 vfs_write+0x1cd/0x510 fs/read_write.c:558 ksys_write+0x18a/0x220 fs/read_write.c:611 __do_sys_write fs/read_write.c:623 [inline] __se_sys_write fs/read_write.c:620 [inline] __x64_sys_write+0x73/0xb0 fs/read_write.c:620 do_syscall_64+0x9e/0x510 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x49/0xbe Signed-off-by:
Kyungtae Kim <kt0755@gmail.com> Reported-and-tested-by:
-
Li Jun authored
commit 1449cb2c upstream. While removing the host (e.g. for USB role switch from host to device), if runtime pm is enabled by user, below oops occurs on dwc3 and cdns3 platforms. Keeping the xhci-plat device active during host removal, and disabling runtime pm before calling pm_runtime_set_suspended() fixes them. oops1: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000240 Internal error: Oops: 96000004 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 5 Comm: kworker/0:0 Not tainted 5.4.3-00107-g64d454a-dirty Hardware name: FSL i.MX8MP EVK (DT) Workqueue: pm pm_runtime_work pstate: 60000005 (nZCv daif -PAN -UAO) pc : xhci_suspend+0x34/0x698 lr : xhci_plat_runtime_suspend+0x2c/0x38 sp : ffff800011ddbbc0 Call trace: xhci_suspend+0x34/0x698 xhci_plat_runtime_suspend+0x2c/0x38 pm_generic_runtime_suspend+0x28/0x40 __rpm_callback+0xd8/0x138 rpm_callback+0x24/0x98 rpm_suspend+0xe0/0x448 rpm_idle+0x124/0x140 pm_runtime_work+0xa0/0xf8 process_one_work+0x1dc/0x370 worker_thread+0x48/0x468 kthread+0xf0/0x120 ret_from_fork+0x10/0x1c oops2: usb 2-1: USB disconnect, device number 2 xhci-hcd xhci-hcd.1.auto: remove, state 4 usb usb2: USB disconnect, device number 1 xhci-hcd xhci-hcd.1.auto: USB bus 2 deregistered xhci-hcd xhci-hcd.1.auto: remove, state 4 usb usb1: USB disconnect, device number 1 Unable to handle kernel NULL pointer dereference at virtual address 0000000000000138 Internal error: Oops: 96000004 [#1] PREEMPT SMP Modules linked in: CPU: 2 PID: 7 Comm: kworker/u8:0 Not tainted 5.6.0-rc4-next-20200304-03578 Hardware name: Freescale i.MX8QXP MEK (DT) Workqueue: 1-0050 tcpm_state_machine_work pstate: 20000005 (nzCv daif -PAN -UAO) pc : xhci_free_dev+0x214/0x270 lr : xhci_plat_runtime_resume+0x78/0x88 sp : ffff80001006b5b0 Call trace: xhci_free_dev+0x214/0x270 xhci_plat_runtime_resume+0x78/0x88 pm_generic_runtime_resume+0x30/0x48 __rpm_callback+0x90/0x148 rpm_callback+0x28/0x88 rpm_resume+0x568/0x758 rpm_resume+0x260/0x758 rpm_resume+0x260/0x758 __pm_runtime_resume+0x40/0x88 device_release_driver_internal+0xa0/0x1c8 device_release_driver+0x1c/0x28 bus_remove_device+0xd4/0x158 device_del+0x15c/0x3a0 usb_disable_device+0xb0/0x268 usb_disconnect+0xcc/0x300 usb_remove_hcd+0xf4/0x1dc xhci_plat_remove+0x78/0xe0 platform_drv_remove+0x30/0x50 device_release_driver_internal+0xfc/0x1c8 device_release_driver+0x1c/0x28 bus_remove_device+0xd4/0x158 device_del+0x15c/0x3a0 platform_device_del.part.0+0x20/0x90 platform_device_unregister+0x28/0x40 cdns3_host_exit+0x20/0x40 cdns3_role_stop+0x60/0x90 cdns3_role_set+0x64/0xd8 usb_role_switch_set_role.part.0+0x3c/0x68 usb_role_switch_set_role+0x20/0x30 tcpm_mux_set+0x60/0xf8 tcpm_reset_port+0xa4/0xf0 tcpm_detach.part.0+0x28/0x50 tcpm_state_machine_work+0x12ac/0x2360 process_one_work+0x1c8/0x470 worker_thread+0x50/0x428 kthread+0xfc/0x128 ret_from_fork+0x10/0x18 Code: c8037c02 35ffffa3 17ffe7c3 f9800011 (c85f7c01) ---[ end trace 45b1a173d2679e44 ]--- [minor commit message cleanup -Mathias] Cc: Baolin Wang <baolin.wang@linaro.org> Cc: <stable@vger.kernel.org> Fixes: b0c69b4b ("usb: host: plat: Enable xHCI plat runtime PM") Reviewed-by:
Li Jun <jun.li@nxp.com> Signed-off-by:
-
Eugeniu Rosca authored
commit 76e1ef1d upstream. On Tue, May 12, 2020 at 09:36:07PM +0800, Kai-Heng Feng wrote [1]: > This patch prevents my Raven Ridge xHCI from getting runtime suspend. The problem described in v5.6 commit 1208f9e1 ("USB: hub: Fix the broken detection of USB3 device in SMSC hub") applies solely to the USB5534B hub [2] present on the Kingfisher Infotainment Carrier Board, manufactured by Shimafuji Electric Inc [3]. Despite that, the aforementioned commit applied the quirk to _all_ hubs carrying vendor ID 0x424 (i.e. SMSC), of which there are more [4] than initially expected. Consequently, the quirk is now enabled on platforms carrying SMSC/Microchip hub models which potentially don't exhibit the original issue. To avoid reports like [1], further limit the quirk's scope to USB5534B [2], by employing both Vendor and Product ID checks. Tested on H3ULCB + Kingfisher rev. M05. [1] https://lore.kernel.org/linux-renesas-soc/73933975-6F0E-40F5-9584-D2B8F615C0F3@canonical.com/ [2] https://www.microchip.com/wwwproducts/en/USB5534B [3] http://www.shimafuji.co.jp/wp/wp-content/uploads/2018/08/SBEV-RCAR-KF-M06Board_HWSpecificationEN_Rev130.pdf [4] https://devicehunt.com/search/type/usb/vendor/0424/device/any Fixes: 1208f9e1 ("USB: hub: Fix the broken detection of USB3 device in SMSC hub") Cc: stable@vger.kernel.org # v4.14+ Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Hardik Gajjar <hgajjar@de.adit-jv.com> Cc: linux-renesas-soc@vger.kernel.org Cc: linux-usb@vger.kernel.org Reported-by:
Eugeniu Rosca <erosca@de.adit-jv.com> Tested-by:
-
Jesus Ramos authored
commit 073919e0 upstream. Kingston HyperX headset with 0951:16ad also needs the same quirk for delaying the frequency controls. Signed-off-by:
Jesus Ramos <jesus-ramos@live.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/BY5PR19MB3634BA68C7CCA23D8DF428E796AF0@BY5PR19MB3634.namprd19.prod.outlook.comSigned-off-by:
-
Takashi Iwai authored
commit c1f6e3c8 upstream. The rawmidi core allows user to resize the runtime buffer via ioctl, and this may lead to UAF when performed during concurrent reads or writes: the read/write functions unlock the runtime lock temporarily during copying form/to user-space, and that's the race window. This patch fixes the hole by introducing a reference counter for the runtime buffer read/write access and returns -EBUSY error when the resize is performed concurrently against read/write. Note that the ref count field is a simple integer instead of refcount_t here, since the all contexts accessing the buffer is basically protected with a spinlock, hence we need no expensive atomic ops. Also, note that this busy check is needed only against read / write functions, and not in receive/transmit callbacks; the race can happen only at the spinlock hole mentioned in the above, while the whole function is protected for receive / transmit callbacks. Reported-by:
butt3rflyh4ck <butterflyhuangxx@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/CAFcO6XMWpUVK_yzzCpp8_XP7+=oUpQvuBeCbMffEDkpe8jWrfg@mail.gmail.com Link: https://lore.kernel.org/r/s5heerw3r5z.wl-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
commit b590b38c upstream. Lenovo Thinkpad T530 seems to have a sensitive internal mic capture that needs to limit the mic boost like a few other Thinkpad models. Although we may change the quirk for ALC269_FIXUP_LENOVO_DOCK, this hits way too many other laptop models, so let's add a new fixup model that limits the internal mic boost on top of the existing quirk and apply to only T530. BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1171293 Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200514160533.10337-1-tiwai@suse.deSigned-off-by:
-
Linus Torvalds authored
commit 1a263ae6 upstream. gcc-10 has started warning about conflicting types for a few new built-in functions, particularly 'free()'. This results in warnings like: crypto/xts.c:325:13: warning: conflicting types for built-in function ‘free’; expected ‘void(void *)’ [-Wbuiltin-declaration-mismatch] because the crypto layer had its local freeing functions called 'free()'. Gcc-10 is in the wrong here, since that function is marked 'static', and thus there is no chance of confusion with any standard library function namespace. But the simplest thing to do is to just use a different name here, and avoid this gcc mis-feature. [ Side note: gcc knowing about 'free()' is in itself not the mis-feature: the semantics of 'free()' are special enough that a compiler can validly do special things when seeing it. So the mis-feature here is that gcc thinks that 'free()' is some restricted name, and you can't shadow it as a local static function. Making the special 'free()' semantics be a function attribute rather than tied to the name would be the much better model ] Signed-off-by:
-
Linus Torvalds authored
commit adc71920 upstream. gcc-10 now warns about passing aliasing pointers to functions that take restricted pointers. That's actually a great warning, and if we ever start using 'restrict' in the kernel, it might be quite useful. But right now we don't, and it turns out that the only thing this warns about is an idiom where we have declared a few functions to be "printf-like" (which seems to make gcc pick up the restricted pointer thing), and then we print to the same buffer that we also use as an input. And people do that as an odd concatenation pattern, with code like this: #define sysfs_show_gen_prop(buffer, fmt, ...) \ snprintf(buffer, PAGE_SIZE, "%s"fmt, buffer, __VA_ARGS__) where we have 'buffer' as both the destination of the final result, and as the initial argument. Yes, it's a bit questionable. And outside of the kernel, people do have standard declarations like int snprintf( char *restrict buffer, size_t bufsz, const char *restrict format, ... ); where that output buffer is marked as a restrict pointer that cannot alias with any other arguments. But in the context of the kernel, that 'use snprintf() to concatenate to the end result' does work, and the pattern shows up in multiple places. And we have not marked our own version of snprintf() as taking restrict pointers, so the warning is incorrect for now, and gcc picks it up on its own. If we do start using 'restrict' in the kernel (and it might be a good idea if people find places where it matters), we'll need to figure out how to avoid this issue for snprintf and friends. But in the meantime, this warning is not useful. Signed-off-by:
-
Linus Torvalds authored
commit 5a76021c upstream. This is the final array bounds warning removal for gcc-10 for now. Again, the warning is good, and we should re-enable all these warnings when we have converted all the legacy array declaration cases to flexible arrays. But in the meantime, it's just noise. Signed-off-by:
-
Linus Torvalds authored
commit 44720996 upstream. This is another fine warning, related to the 'zero-length-bounds' one, but hitting the same historical code in the kernel. Because C didn't historically support flexible array members, we have code that instead uses a one-sized array, the same way we have cases of zero-sized arrays. The one-sized arrays come from either not wanting to use the gcc zero-sized array extension, or from a slight convenience-feature, where particularly for strings, the size of the structure now includes the allocation for the final NUL character. So with a "char name[1];" at the end of a structure, you can do things like v = my_malloc(sizeof(struct vendor) + strlen(name)); and avoid the "+1" for the terminator. Yes, the modern way to do that is with a flexible array, and using 'offsetof()' instead of 'sizeof()', and adding the "+1" by hand. That also technically gets the size "more correct" in that it avoids any alignment (and thus padding) issues, but this is another long-term cleanup thing that will not happen for 5.7. So disable the warning for now, even though it's potentially quite useful. Having a slew of warnings that then hide more urgent new issues is not an improvement. Signed-off-by:
-
Linus Torvalds authored
commit 5c45de21 upstream. This is a fine warning, but we still have a number of zero-length arrays in the kernel that come from the traditional gcc extension. Yes, they are getting converted to flexible arrays, but in the meantime the gcc-10 warning about zero-length bounds is very verbose, and is hiding other issues. I missed one actual build failure because it was hidden among hundreds of lines of warning. Thankfully I caught it on the second go before pushing things out, but it convinced me that I really need to disable the new warnings for now. We'll hopefully be all done with our conversion to flexible arrays in the not too distant future, and we can then re-enable this warning. Signed-off-by:
-
