Pull irq fixes from Thomas Gleixner:
 "Two small fixlets:

   - select a required Kconfig to make the MVEBU driver compile

   - add the missing MIPS local GIC interrupts which prevent drivers to
     probe successfully"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/mips-gic: Fix Local compare interrupt
  irqchip/mvebu-odmi: Select GENERIC_MSI_IRQ_DOMAIN

Pull core fix from Thomas Gleixner:
 "Prevent leaking kernel memory via /proc/$pid/syscall when the queried
  task is not in a syscall"

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  lib/syscall: Clear return values when no stack

Pull parisc fixes from Helge Deller:
 "Al Viro reported that - in case of read faults - our copy_from_user()
  implementation may claim to have copied more bytes than it actually
  did. In order to fix this bug and because of the way how gcc optimizes
  register usage for inline assembly in C code, we had to replace our
  pa_memcpy() function with a pure assembler implementation.

  While fixing the memcpy bug we noticed some other issues with our
  get_user() and put_user() functions, e.g. nested faults may return
  wrong data. This is now fixed by a common fixup handler for
  get_user/put_user in the exception handler which additionally makes
  generated code smaller and faster.

  The third patch is a trivial one-line fix for a patch which went in
  during 4.11-rc and which avoids stalled CPU warnings after power
  shutdown (for parisc machines which can't plug power off themselves).

  Due to the rewrite of pa_memcpy() into assembly this patch got bigger
  than what I wanted to have sent at this stage.

  Those patches have been running in production during the last few days
  on our debian build servers without any further issues"

* 'parisc-4.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Avoid stalled CPU warnings after system shutdown
  parisc: Clean up fixup routines for get_user()/put_user()
  parisc: Fix access fault handling in pa_memcpy()

Pull SCSI fixes from James Bottomley:
 "Thirteen small fixes: The hopefully final effort to get the lpfc nvme
  kconfig problems sorted, there's one important sg fix (user can induce
  read after end of buffer) and one minor enhancement (adding an extra
  PCI ID to qedi). The rest are a set of minor fixes, which mostly occur
  as user visible in error legs or on specific devices"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: ufs: remove the duplicated checking for supporting clkscaling
  scsi: lpfc: fix building without debugfs support
  scsi: lpfc: Fix PT2PT PRLI reject
  scsi: hpsa: fix volume offline state
  scsi: libsas: fix ata xfer length
  scsi: scsi_dh_alua: Warn if the first argument of alua_rtpg_queue() is NULL
  scsi: scsi_dh_alua: Ensure that alua_activate() calls the completion function
  scsi: scsi_dh_alua: Check scsi_device_get() return value
  scsi: sg: check length passed to SG_NEXT_CMD_LEN
  scsi: ufshcd-platform: remove the useless cast in ERR_PTR/IS_ERR
  scsi: qedi: Add PCI device-ID for QL41xxx adapters.
  scsi: aacraid: Fix potential null access
  scsi: qla2xxx: Fix crash in qla2xxx_eh_abort on bad ptr

Merge misc fixes from Andrew Morton:
 "11 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  kasan: do not sanitize kexec purgatory
  drivers/rapidio/devices/tsi721.c: make module parameter variable name unique
  mm/hugetlb.c: don't call region_abort if region_chg fails
  kasan: report only the first error by default
  hugetlbfs: initialize shared policy as part of inode allocation
  mm: fix section name for .data..ro_after_init
  mm, hugetlb: use pte_present() instead of pmd_present() in follow_huge_pmd()
  mm: workingset: fix premature shadow node shrinking with cgroups
  mm: rmap: fix huge file mmap accounting in the memcg stats
  mm: move mm_percpu_wq initialization earlier
  mm: migrate: fix remove_migration_pte() for ksm pages

Pull USB fixes from Greg KH:
 "Here are some small USB fixes for 4.11-rc5.

  The usual xhci fixes are here, as well as a fix for yet-another-bug-
  found-by-KASAN, those developers are doing great stuff here.

  And there's a phy build warning fix that showed up in 4.11-rc1.

  All of these have been in linux-next with no reported issues"

* tag 'usb-4.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: phy: isp1301: Fix build warning when CONFIG_OF is disabled
  xhci: Manually give back cancelled URB if we can't queue it for cancel
  xhci: Set URB actual length for stopped control transfers
  xhci: plat: Register shutdown for xhci_plat
  USB: fix linked-list corruption in rh_call_control()

Pull tty/serial fixes from Greg KH:
 "Here are some small fixes for some serial drivers and Kconfig help
  text for 4.11-rc5. Nothing major here at all, a few things resolving
  reported bugs in some random serial drivers.

  I don't think these made the last linux-next due to me getting to them
  yesterday, but I am not sure, they might have snuck in. The patches
  only affect drivers that the maintainers of sent me these patches for,
  so we should be safe here :)"

* tag 'tty-4.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  tty: pl011: fix earlycon work-around for QDF2400 erratum 44
  serial: 8250_EXAR: fix duplicate Kconfig text and add missing help text
  tty/serial: atmel: fix TX path in atmel_console_write()
  tty/serial: atmel: fix race condition (TX+DMA)
  serial: mxs-auart: Fix baudrate calculation

Pull ACPI fixes from Rafael Wysocki:
 "These fix two issues related to IOAPIC hotplug, an overzealous build
  optimization that prevents the function graph tracer from working with
  the ACPI subsystem correctly and an RCU synchronization issue in the
  ACPI APEI code.

  Specifics:

   - drop the unconditional setting of the '-Os' gcc flag from the ACPI
     Makefile to make the function graph tracer work correctly with the
     ACPI subsystem (Josh Poimboeuf).

   - add missing synchronize_rcu() to ghes_remove() which removes an
     element from an RCU-protected list, but fails to synchronize it
     properly afterward (James Morse).

   - fix two problems related to IOAPIC hotplug, a local variable
     initialization in setup_res() and the creation of platform device
     objects for IO(x)APICs which are (a) unused and (b) leaked on
     hot-removal (Joerg Roedel)"

* tag 'acpi-4.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: Fix incompatibility with mcount-based function graph tracing
  ACPI / APEI: Add missing synchronize_rcu() on NOTIFY_SCI removal
  ACPI: Do not create a platform_device for IOAPIC/IOxAPIC
  ACPI: ioapic: Clear on-stack resource before using it

Pull power management fixes from Rafael Wysocki:
 "These fix a cpufreq core issue with the initialization of the cpufreq
  sysfs interface and a cpuidle powernv driver initialization issue.

  Specifics:

   - symbolic links from CPU directories to the corresponding cpufreq
     policy directories in sysfs are not created during initialization
     in some cases which confuses user space, so prevent that from
     happening (Rafael Wysocki).

   - the powernv cpuidle driver fails to pass a correct cpumaks to the
     cpuidle core in some cases which causes subsequent failures to
     occur, so fix it (Vaidyanathan Srinivasan)"

* tag 'pm-4.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpuidle: powernv: Pass correct drv->cpumask for registration
  cpufreq: Fix creation of symbolic links to policy directories

Pull i2c fixes from Wolfram Sang:
 "Two bugfixes from I2C, specifically the I2C mux section. Thanks to
  peda for collecting them"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: mux: pca954x: Add missing pca9546 definition to chip_desc
  Revert "i2c: mux: pca954x: Add ACPI support for pca954x"

Pull ARC fixes from Vineet Gupta:
 "Accumulated fixes for ARC which I've been been sitting on for a while:

   - reading clk from driver vs device tree [Vlad]

   - fix support for UIO in VDK platform [Alexey]

   - SLC busy bit reading workaround

   - build warning with kprobes header reorg"

* tag 'arc-4.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  ARC: fix build warnings with !CONFIG_KPROBES
  ARCv2: SLC: Make sure busy bit is set properly on SLC flushing
  ARC: vdk: Fix support of UIO
  ARCv2: make unimplemented vectors as no-ops rather than halt core
  ARC: get rate from clk driver instead of reading device tree
  ARC: [dts] add cpu nodes to ARCHS SMP device tree
  ARC: [dts] add input clocks for cpu nodes

Pull nfsd fixes from Bruce Fields:
 "The restriction of NFSv4 to TCP went overboard and also broke the
  backchannel; fix.

  Also some minor refinements to the nfsd version-setting interface that
  we'd like to get fixed before release"

* tag 'nfsd-4.11-1' of git://linux-nfs.org/~bfields/linux:
  svcrdma: set XPT_CONG_CTRL flag for bc xprt
  NFSD: fix nfsd_reset_versions for NFSv4.
  NFSD: fix nfsd_minorversion(.., NFSD_AVAIL)
  NFSD: further refinement of content of /proc/fs/nfsd/versions
  nfsd: map the ENOKEY to nfserr_perm for avoiding warning
  SUNRPC/backchanel: set XPT_CONG_CTRL flag for bc xprt

The work-around for the Qualcomm Datacenter Technologies QDF2400
erratum 44 sets the "qdf2400_e44_present" global variable if the
work-around is needed.  However, this check does not happen until after
earlycon is initialized, which means the work-around is not
used, and the console hangs as soon as it displays one character.

Fixes: d8a4995b ("tty: pl011: Work around QDF2400 E44 stuck BUSY bit")
Signed-off-by: Timur Tabi <timur@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull btrfs fixes from Chris Mason:
 "We have three small fixes queued up in my for-linus-4.11 branch"

* 'for-linus-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  Btrfs: fix an integer overflow check
  btrfs: Change qgroup_meta_rsv to 64bit
  Btrfs: bring back repair during read

Fixes this:

  kexec: Undefined symbol: __asan_load8_noabort
  kexec-bzImage64: Loading purgatory failed

Link: http://lkml.kernel.org/r/1489672155.4458.7.camel@gmx.deSigned-off-by: Mike Galbraith <efault@gmx.de>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kbuild test robot reported a non-static variable name collision between
a staging driver and a RapidIO driver, with a generic variable name of
'dbg_level'.

Both drivers should be changed so that they don't use this generic
public variable name.  This patch fixes the RapidIO driver but does not
change the user interface (name) for the module parameter.

  drivers/staging/built-in.o:(.bss+0x109d0): multiple definition of `dbg_level'
  drivers/rapidio/built-in.o:(.bss+0x16c): first defined here

Link: http://lkml.kernel.org/r/ab527fc5-aa3c-4b07-5d48-eef5de703192@infradead.orgSigned-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Jérémy Lefaure <jeremy.lefaure@lse.epita.fr>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Changes to hugetlbfs reservation maps is a two step process.  The first
step is a call to region_chg to determine what needs to be changed, and
prepare that change.  This should be followed by a call to call to
region_add to commit the change, or region_abort to abort the change.

The error path in hugetlb_reserve_pages called region_abort after a
failed call to region_chg.  As a result, the adds_in_progress counter in
the reservation map is off by 1.  This is caught by a VM_BUG_ON in
resv_map_release when the reservation map is freed.

syzkaller fuzzer (when using an injected kmalloc failure) found this
bug, that resulted in the following:

 kernel BUG at mm/hugetlb.c:742!
 Call Trace:
  hugetlbfs_evict_inode+0x7b/0xa0 fs/hugetlbfs/inode.c:493
  evict+0x481/0x920 fs/inode.c:553
  iput_final fs/inode.c:1515 [inline]
  iput+0x62b/0xa20 fs/inode.c:1542
  hugetlb_file_setup+0x593/0x9f0 fs/hugetlbfs/inode.c:1306
  newseg+0x422/0xd30 ipc/shm.c:575
  ipcget_new ipc/util.c:285 [inline]
  ipcget+0x21e/0x580 ipc/util.c:639
  SYSC_shmget ipc/shm.c:673 [inline]
  SyS_shmget+0x158/0x230 ipc/shm.c:657
  entry_SYSCALL_64_fastpath+0x1f/0xc2
 RIP: resv_map_release+0x265/0x330 mm/hugetlb.c:742

Link: http://lkml.kernel.org/r/1490821682-23228-1-git-send-email-mike.kravetz@oracle.comSigned-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Disable kasan after the first report.  There are several reasons for
this:

 - Single bug quite often has multiple invalid memory accesses causing
   storm in the dmesg.

 - Write OOB access might corrupt metadata so the next report will print
   bogus alloc/free stacktraces.

 - Reports after the first easily could be not bugs by itself but just
   side effects of the first one.

Given that multiple reports usually only do harm, it makes sense to
disable kasan after the first one.  If user wants to see all the
reports, the boot-time parameter kasan_multi_shot must be used.

[aryabinin@virtuozzo.com: wrote changelog and doc, added missing include]
Link: http://lkml.kernel.org/r/20170323154416.30257-1-aryabinin@virtuozzo.comSigned-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Any time after inode allocation, destroy_inode can be called.  The
hugetlbfs inode contains a shared_policy structure, and
mpol_free_shared_policy is unconditionally called as part of
hugetlbfs_destroy_inode.  Initialize the policy as part of inode
allocation so that any quick (error path) calls to destroy_inode will be
handed an initialized policy.

syzkaller fuzzer found this bug, that resulted in the following:

    BUG: KASAN: user-memory-access in atomic_inc
    include/asm-generic/atomic-instrumented.h:87 [inline] at addr
    000000131730bd7a
    BUG: KASAN: user-memory-access in __lock_acquire+0x21a/0x3a80
    kernel/locking/lockdep.c:3239 at addr 000000131730bd7a
    Write of size 4 by task syz-executor6/14086
    CPU: 3 PID: 14086 Comm: syz-executor6 Not tainted 4.11.0-rc3+ #364
    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
    Call Trace:
     atomic_inc include/asm-generic/atomic-instrumented.h:87 [inline]
     __lock_acquire+0x21a/0x3a80 kernel/locking/lockdep.c:3239
     lock_acquire+0x1ee/0x590 kernel/locking/lockdep.c:3762
     __raw_write_lock include/linux/rwlock_api_smp.h:210 [inline]
     _raw_write_lock+0x33/0x50 kernel/locking/spinlock.c:295
     mpol_free_shared_policy+0x43/0xb0 mm/mempolicy.c:2536
     hugetlbfs_destroy_inode+0xca/0x120 fs/hugetlbfs/inode.c:952
     alloc_inode+0x10d/0x180 fs/inode.c:216
     new_inode_pseudo+0x69/0x190 fs/inode.c:889
     new_inode+0x1c/0x40 fs/inode.c:918
     hugetlbfs_get_inode+0x40/0x420 fs/hugetlbfs/inode.c:734
     hugetlb_file_setup+0x329/0x9f0 fs/hugetlbfs/inode.c:1282
     newseg+0x422/0xd30 ipc/shm.c:575
     ipcget_new ipc/util.c:285 [inline]
     ipcget+0x21e/0x580 ipc/util.c:639
     SYSC_shmget ipc/shm.c:673 [inline]
     SyS_shmget+0x158/0x230 ipc/shm.c:657
     entry_SYSCALL_64_fastpath+0x1f/0xc2

Analysis provided by Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>

Link: http://lkml.kernel.org/r/1490477850-7944-1-git-send-email-mike.kravetz@oracle.comSigned-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

A section name for .data..ro_after_init was added by both:

    commit d07a980c ("s390: add proper __ro_after_init support")

and

    commit d7c19b06 ("mm: kmemleak: scan .data.ro_after_init")

The latter adds incorrect wrapping around the existing s390 section, and
came later.  I'd prefer the s390 naming, so this moves the s390-specific
name up to the asm-generic/sections.h and renames the section as used by
kmemleak (and in the future, kernel/extable.c).

Link: http://lkml.kernel.org/r/20170327192213.GA129375@beastSigned-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>	[s390 parts]
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Cc: Eddie Kovsky <ewk@edkovsky.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

I found the race condition which triggers the following bug when
move_pages() and soft offline are called on a single hugetlb page
concurrently.

    Soft offlining page 0x119400 at 0x700000000000
    BUG: unable to handle kernel paging request at ffffea0011943820
    IP: follow_huge_pmd+0x143/0x190
    PGD 7ffd2067
    PUD 7ffd1067
    PMD 0
        [61163.582052] Oops: 0000 [#1] SMP
    Modules linked in: binfmt_misc ppdev virtio_balloon parport_pc pcspkr i2c_piix4 parport i2c_core acpi_cpufreq ip_tables xfs libcrc32c ata_generic pata_acpi virtio_blk 8139too crc32c_intel ata_piix serio_raw libata virtio_pci 8139cp virtio_ring virtio mii floppy dm_mirror dm_region_hash dm_log dm_mod [last unloaded: cap_check]
    CPU: 0 PID: 22573 Comm: iterate_numa_mo Tainted: P           OE   4.11.0-rc2-mm1+ #2
    Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
    RIP: 0010:follow_huge_pmd+0x143/0x190
    RSP: 0018:ffffc90004bdbcd0 EFLAGS: 00010202
    RAX: 0000000465003e80 RBX: ffffea0004e34d30 RCX: 00003ffffffff000
    RDX: 0000000011943800 RSI: 0000000000080001 RDI: 0000000465003e80
    RBP: ffffc90004bdbd18 R08: 0000000000000000 R09: ffff880138d34000
    R10: ffffea0004650000 R11: 0000000000c363b0 R12: ffffea0011943800
    R13: ffff8801b8d34000 R14: ffffea0000000000 R15: 000077ff80000000
    FS:  00007fc977710740(0000) GS:ffff88007dc00000(0000) knlGS:0000000000000000
    CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
    CR2: ffffea0011943820 CR3: 000000007a746000 CR4: 00000000001406f0
    Call Trace:
     follow_page_mask+0x270/0x550
     SYSC_move_pages+0x4ea/0x8f0
     SyS_move_pages+0xe/0x10
     do_syscall_64+0x67/0x180
     entry_SYSCALL64_slow_path+0x25/0x25
    RIP: 0033:0x7fc976e03949
    RSP: 002b:00007ffe72221d88 EFLAGS: 00000246 ORIG_RAX: 0000000000000117
    RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fc976e03949
    RDX: 0000000000c22390 RSI: 0000000000001400 RDI: 0000000000005827
    RBP: 00007ffe72221e00 R08: 0000000000c2c3a0 R09: 0000000000000004
    R10: 0000000000c363b0 R11: 0000000000000246 R12: 0000000000400650
    R13: 00007ffe72221ee0 R14: 0000000000000000 R15: 0000000000000000
    Code: 81 e4 ff ff 1f 00 48 21 c2 49 c1 ec 0c 48 c1 ea 0c 4c 01 e2 49 bc 00 00 00 00 00 ea ff ff 48 c1 e2 06 49 01 d4 f6 45 bc 04 74 90 <49> 8b 7c 24 20 40 f6 c7 01 75 2b 4c 89 e7 8b 47 1c 85 c0 7e 2a
    RIP: follow_huge_pmd+0x143/0x190 RSP: ffffc90004bdbcd0
    CR2: ffffea0011943820
    ---[ end trace e4f81353a2d23232 ]---
    Kernel panic - not syncing: Fatal exception
    Kernel Offset: disabled

This bug is triggered when pmd_present() returns true for non-present
hugetlb, so fixing the present check in follow_huge_pmd() prevents it.
Using pmd_present() to determine present/non-present for hugetlb is not
correct, because pmd_present() checks multiple bits (not only
_PAGE_PRESENT) for historical reason and it can misjudge hugetlb state.

Fixes: e66f17ff ("mm/hugetlb: take page table lock in follow_huge_pmd()")
Link: http://lkml.kernel.org/r/1490149898-20231-1-git-send-email-n-horiguchi@ah.jp.nec.comSigned-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Cc: <stable@vger.kernel.org>        [4.0+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit 0a6b76dd ("mm: workingset: make shadow node shrinker memcg
aware") enabled cgroup-awareness in the shadow node shrinker, but forgot
to also enable cgroup-awareness in the list_lru the shadow nodes sit on.

Consequently, all shadow nodes are sitting on a global (per-NUMA node)
list, while the shrinker applies the limits according to the amount of
cache in the cgroup its shrinking.  The result is excessive pressure on
the shadow nodes from cgroups that have very little cache.

Enable memcg-mode on the shadow node LRUs, such that per-cgroup limits
are applied to per-cgroup lists.

Fixes: 0a6b76dd ("mm: workingset: make shadow node shrinker memcg aware")
Link: http://lkml.kernel.org/r/20170322005320.8165-1-hannes@cmpxchg.orgSigned-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Vladimir Davydov <vdavydov@tarantool.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: <stable@vger.kernel.org>	[4.6+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Huge pages are accounted as single units in the memcg's "file_mapped"
counter.  Account the correct number of base pages, like we do in the
corresponding node counter.

Link: http://lkml.kernel.org/r/20170322005111.3156-1-hannes@cmpxchg.orgSigned-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: <stable@vger.kernel.org>	[4.8+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Yang Li has reported that drain_all_pages triggers a WARN_ON which means
that this function is called earlier than the mm_percpu_wq is
initialized on arm64 with CMA configured:

  WARNING: CPU: 2 PID: 1 at mm/page_alloc.c:2423 drain_all_pages+0x244/0x25c
  Modules linked in:
  CPU: 2 PID: 1 Comm: swapper/0 Not tainted 4.11.0-rc1-next-20170310-00027-g64dfbc5 #127
  Hardware name: Freescale Layerscape 2088A RDB Board (DT)
  task: ffffffc07c4a6d00 task.stack: ffffffc07c4a8000
  PC is at drain_all_pages+0x244/0x25c
  LR is at start_isolate_page_range+0x14c/0x1f0
  [...]
   drain_all_pages+0x244/0x25c
   start_isolate_page_range+0x14c/0x1f0
   alloc_contig_range+0xec/0x354
   cma_alloc+0x100/0x1fc
   dma_alloc_from_contiguous+0x3c/0x44
   atomic_pool_init+0x7c/0x208
   arm64_dma_init+0x44/0x4c
   do_one_initcall+0x38/0x128
   kernel_init_freeable+0x1a0/0x240
   kernel_init+0x10/0xfc
   ret_from_fork+0x10/0x20

Fix this by moving the whole setup_vmstat which is an initcall right now
to init_mm_internals which will be called right after the WQ subsystem
is initialized.

Link: http://lkml.kernel.org/r/20170315164021.28532-1-mhocko@kernel.orgSigned-off-by: Michal Hocko <mhocko@suse.com>
Reported-by: Yang Li <pku.leo@gmail.com>
Tested-by: Yang Li <pku.leo@gmail.com>
Tested-by: Xiaolong Ye <xiaolong.ye@intel.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

I found that calling page migration for ksm pages causes the following
bug:

    page:ffffea0004d51180 count:2 mapcount:2 mapping:ffff88013c785141 index:0x913
    flags: 0x57ffffc0040068(uptodate|lru|active|swapbacked)
    raw: 0057ffffc0040068 ffff88013c785141 0000000000000913 0000000200000001
    raw: ffffea0004d5f9e0 ffffea0004d53f60 0000000000000000 ffff88007d81b800
    page dumped because: VM_BUG_ON_PAGE(!PageLocked(page))
    page->mem_cgroup:ffff88007d81b800
    ------------[ cut here ]------------
    kernel BUG at /src/linux-dev/mm/rmap.c:1086!
    invalid opcode: 0000 [#1] SMP
    Modules linked in: ppdev parport_pc virtio_balloon i2c_piix4 pcspkr parport i2c_core acpi_cpufreq ip_tables xfs libcrc32c ata_generic pata_acpi ata_piix 8139too libata virtio_blk 8139cp crc32c_intel mii virtio_pci virtio_ring serio_raw virtio floppy dm_mirror dm_region_hash dm_log dm_mod
    CPU: 0 PID: 3162 Comm: bash Not tainted 4.11.0-rc2-mm1+ #1
    Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
    RIP: 0010:do_page_add_anon_rmap+0x1ba/0x260
    RSP: 0018:ffffc90002473b30 EFLAGS: 00010282
    RAX: 0000000000000021 RBX: ffffea0004d51180 RCX: 0000000000000006
    RDX: 0000000000000000 RSI: 0000000000000082 RDI: ffff88007dc0dfe0
    RBP: ffffc90002473b58 R08: 00000000fffffffe R09: 00000000000001c1
    R10: 0000000000000005 R11: 00000000000001c0 R12: ffff880139ab3d80
    R13: 0000000000000000 R14: 0000700000000200 R15: 0000160000000000
    FS:  00007f5195f50740(0000) GS:ffff88007dc00000(0000) knlGS:0000000000000000
    CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
    CR2: 00007fd450287000 CR3: 000000007a08e000 CR4: 00000000001406f0
    Call Trace:
     page_add_anon_rmap+0x18/0x20
     remove_migration_pte+0x220/0x2c0
     rmap_walk_ksm+0x143/0x220
     rmap_walk+0x55/0x60
     remove_migration_ptes+0x53/0x80
     migrate_pages+0x8ed/0xb60
     soft_offline_page+0x309/0x8d0
     store_soft_offline_page+0xaf/0xf0
     dev_attr_store+0x18/0x30
     sysfs_kf_write+0x3a/0x50
     kernfs_fop_write+0xff/0x180
     __vfs_write+0x37/0x160
     vfs_write+0xb2/0x1b0
     SyS_write+0x55/0xc0
     do_syscall_64+0x67/0x180
     entry_SYSCALL64_slow_path+0x25/0x25
    RIP: 0033:0x7f51956339e0
    RSP: 002b:00007ffcfa0dffc8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
    RAX: ffffffffffffffda RBX: 000000000000000c RCX: 00007f51956339e0
    RDX: 000000000000000c RSI: 00007f5195f53000 RDI: 0000000000000001
    RBP: 00007f5195f53000 R08: 000000000000000a R09: 00007f5195f50740
    R10: 000000000000000b R11: 0000000000000246 R12: 00007f5195907400
    R13: 000000000000000c R14: 0000000000000001 R15: 0000000000000000
    Code: fe ff ff 48 81 c2 00 02 00 00 48 89 55 d8 e8 2e c3 fd ff 48 8b 55 d8 e9 42 ff ff ff 48 c7 c6 e0 52 a1 81 48 89 df e8 46 ad fe ff <0f> 0b 48 83 e8 01 e9 7f fe ff ff 48 83 e8 01 e9 96 fe ff ff 48
    RIP: do_page_add_anon_rmap+0x1ba/0x260 RSP: ffffc90002473b30
    ---[ end trace a679d00f4af2df48 ]---
    Kernel panic - not syncing: Fatal exception
    Kernel Offset: disabled
    ---[ end Kernel panic - not syncing: Fatal exception

The problem is in the following lines:

    new = page - pvmw.page->index +
        linear_page_index(vma, pvmw.address);

The 'new' is calculated with 'page' which is given by the caller as a
destination page and some offset adjustment for thp.  But this doesn't
properly work for ksm pages because pvmw.page->index doesn't change for
each address but linear_page_index() changes, which means that 'new'
points to different pages for each addresses backed by the ksm page.  As
a result, we try to set totally unrelated pages as destination pages,
and that causes kernel crash.

This patch fixes the miscalculation and makes ksm page migration work
fine.

Fixes: 3fe87967 ("mm: convert remove_migration_pte() to use page_vma_mapped_walk()")
Link: http://lkml.kernel.org/r/1489717683-29905-1-git-send-email-n-horiguchi@ah.jp.nec.comSigned-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* pm-cpufreq-fixes:
  cpufreq: Fix creation of symbolic links to policy directories

* pm-cpuidle-fixes:
  cpuidle: powernv: Pass correct drv->cpumask for registration

* acpi-hotplug-fixes:
  ACPI: Do not create a platform_device for IOAPIC/IOxAPIC
  ACPI: ioapic: Clear on-stack resource before using it

* acpi-build-fixes:
  ACPI: Fix incompatibility with mcount-based function graph tracing

* acpi-apei-fixes:
  ACPI / APEI: Add missing synchronize_rcu() on NOTIFY_SCI removal

Pull NFS client fixes from Anna Schumaker:
 "Here are a few more bugfixes that came in over the last couple of
  weeks. Most of these fix various hangs and loops that people found,
  but we also had a few error handling fixes.

  Stable Bugfixes:
   - fix infinite loop on BAD_STATEID error

  Other Bugfixes:
   - fix old dentry rehash after move
   - fix pnfs GETDEVINFO hangs
   - fix pnfs fallback to MDS on commit errors
   - fix flexfiles kernel oops"

* tag 'nfs-for-4.11-3' of git://git.linux-nfs.org/projects/anna/linux-nfs:
  nfs: flexfiles: fix kernel OOPS if MDS returns unsupported DS type
  NFSv4.1 fix infinite loop on IO BAD_STATEID error
  PNFS fix fallback to MDS if got error on commit to DS
  NFS filelayout:call GETDEVICEINFO after pnfs_layout_process completes
  NFS store nfs4_deviceid in struct nfs4_filelayout_segment
  NFS cleanup struct nfs4_filelayout_segment
  NFS: Fix old dentry rehash after move

Pull arm64 fixes from Will Deacon:
 "The main thing is a fix for a NULL dereference on systems that boot
  using spin-tables or the ACPI parking protocol, but there are also a
  couple of trivial one-liners too.

  We're currently debugging a page flags corruption issue under
  syzkaller, but we're still some way from fixing that as it's proving
  fiddly to reproduce.

  Summary:

   - fix cpu_die() NULL dereference when booting secondary CPUs using
     spin-table

   - remove redundant #include

   - remove obsolete .gitignore entry"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: drop non-existing vdso-offsets.h from .gitignore
  arm64: remove redundant header file in current.h
  arm64: fix NULL dereference in have_cpu_die()

Pull crypto fixes from Herbert Xu:
 "This fixes the following issues:

   - memory corruption when kmalloc fails in xts/lrw

   - mark some CCP DMA channels as private

   - fix reordering race in padata

   - regression in omap-rng DT description"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: xts,lrw - fix out-of-bounds write after kmalloc failure
  crypto: ccp - Make some CCP DMA channels private
  padata: avoid race in reordering
  dt-bindings: rng: clocks property on omap_rng not always mandatory

Pull MMC fixes from Ulf Hansson:
 "Here are a couple of mmc fixes intended for v4.11 rc5.

  MMC host:
   - sdhci: Fix bug when using SDIO IRQ
   - sdhci-of-at91: Fix eMMC DDR52 card detection"

* tag 'mmc-v4.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: sdhci-of-at91: fix MMC_DDR_52 timing selection
  mmc: sdhci: Disable runtime pm when the sdio_irq is enabled

Pull sound fixes from Takashi Iwai:
 "At this time, most of changes are for ASoC, while we got one fix for
  yet another race of ALSA sequencer core and a usual HD-audio quirk.

  The ASoC changes are mostly small and device-specific fixes. A
  slightly large volume is seen in sun8i-codec, which is a new code in
  4.11, and we'd like to fix user-visible stuff before the official 4.1
  release"

* tag 'sound-4.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (27 commits)
  ALSA: hda - fix a problem for lineout on a Dell AIO machine
  ASoC: simple-card: fix simple_dai clk lookup
  ASoC: STI: Fix reader substream pointer set
  ALSA: seq: Fix race during FIFO resize
  ARM: dts: sun8i: Update audio-routing with renamed widgets
  ASoC: sun8i-codec: Convert to use SND_SOC_DAPM_AIF_IN
  ASoC: sun8i-codec: Fix space on audio-routing widget
  ASoC: sun8i-codec: Update mixer to use SOC_DAPM_DOUBLE
  ASoC: sun8i-codec: Remove analog "HP" widget
  ASoC: rt5665: fix wrong shift rt5665_if2_1_adc_in_enum
  ASoC: rt5665: fix define of RT5665_HP_DRIVER_5X
  ASoC: rcar: dma: remove unnecessary "volatile"
  ASoC: rcar: clear DE bit only in PDMACHCR when it stops
  ASoC: rsnd: fix sound route path when using SRC6/SRC9
  ASoC: don't dereference NULL pcm_{new,free}
  ASoC: rt5665: CLKDET is also a power of ASRC
  ASoC: rt5665: Vref3 is necessary for Mono Amp
  ASoC: rt5665: increase LDO level
  ASoC: rt5665: fix getting wrong work handler container
  ASoC: atmel-classd: fix audio clock rate
  ...

Pull HID fixes from Jiri Kosina:

 - Wacom regression fixes, from Aaron Armstrong Skomra

 - new device ID addition by Peter Stein

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: wacom: call _query_tablet_data() for BAMBOO_TOUCH
  HID: wacom: Don't add ghost interface as shared data
  HID: xinmo: fix for out of range for THT 2P arcade controller.

Pull drm fixes from Dave Airlie:
 "Seems to be quietening down, which means someone will make a liar of
  me for rc6.

  Just one vc4, one etnvaiv, one radeon, and a few i915 GVT fixes, and
  one i915 normal fixes"

* tag 'drm-fixes-for-v4.11-rc5' of git://people.freedesktop.org/~airlied/linux:
  drm/vc4: Allocate the right amount of space for boot-time CRTC state.
  drm/etnaviv: (re-)protect fence allocation with GPU mutex
  drm/radeon: Override fpfn for all VRAM placements in radeon_evict_flags
  drm/i915: Restore marking context objects as dirty on pinning
  drm/i915/gvt: Use force single submit flag to distinguish gvt request from i915 request
  drm/i915/gvt: set shadow entry to scratch page while p2m failed
  drm/i915/gvt: Fix guest fail to read EDID leading to black guest console issue.
  drm/i915/gvt: fix wrong offset when loading RCS mocs
  drm/i915/gvt: add write handler for mmio mbctl
  drm/i915/kvmgt: Hold struct kvm reference

this fix aims to fix dereferencing of a mirror in an error state when MDS
returns unsupported DS type (IOW, not v3), which causes the following oops:

[  220.370709] BUG: unable to handle kernel NULL pointer dereference at 0000000000000065
[  220.370842] IP: ff_layout_mirror_valid+0x2d/0x110 [nfs_layout_flexfiles]
[  220.370920] PGD 0

[  220.370972] Oops: 0000 [#1] SMP
[  220.371013] Modules linked in: nfnetlink_queue nfnetlink_log bluetooth nfs_layout_flexfiles rpcsec_gss_krb5 nfsv4 dns_resolver nfs fscache nf_conntrack_netbios_ns nf_conntrack_broadcast xt_CT ip6t_rpfilter ip6t_REJECT nf_reject_ipv6 xt_conntrack ip_set nfnetlink ebtable_nat ebtable_broute bridge stp llc ip6table_raw ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6table_mangle ip6table_security iptable_raw iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack libcrc32c iptable_mangle iptable_security ebtable_filter ebtables ip6table_filter ip6_tables binfmt_misc intel_rapl x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel btrfs kvm arc4 snd_hda_codec_hdmi iwldvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel intel_cstate mac80211 xor uvcvideo
[  220.371814]  videobuf2_vmalloc videobuf2_memops snd_hda_codec_idt mei_wdt videobuf2_v4l2 snd_hda_codec_generic iTCO_wdt ppdev videobuf2_core iTCO_vendor_support dell_rbtn dell_wmi iwlwifi sparse_keymap dell_laptop dell_smbios snd_hda_intel dcdbas videodev snd_hda_codec dell_smm_hwmon snd_hda_core media cfg80211 intel_uncore snd_hwdep raid6_pq snd_seq intel_rapl_perf snd_seq_device joydev i2c_i801 rfkill lpc_ich snd_pcm parport_pc mei_me parport snd_timer dell_smo8800 mei snd shpchp soundcore tpm_tis tpm_tis_core tpm nfsd auth_rpcgss nfs_acl lockd grace sunrpc i915 nouveau mxm_wmi ttm i2c_algo_bit drm_kms_helper crc32c_intel e1000e drm sdhci_pci firewire_ohci sdhci serio_raw mmc_core firewire_core ptp crc_itu_t pps_core wmi fjes video
[  220.372568] CPU: 7 PID: 4988 Comm: cat Not tainted 4.10.5-200.fc25.x86_64 #1
[  220.372647] Hardware name: Dell Inc. Latitude E6520/0J4TFW, BIOS A06 07/11/2011
[  220.372729] task: ffff94791f6ea580 task.stack: ffffb72b88c0c000
[  220.372802] RIP: 0010:ff_layout_mirror_valid+0x2d/0x110 [nfs_layout_flexfiles]
[  220.372883] RSP: 0018:ffffb72b88c0f970 EFLAGS: 00010246
[  220.372945] RAX: 0000000000000000 RBX: ffff9479015ca600 RCX: ffffffffffffffed
[  220.373025] RDX: ffffffffffffffed RSI: ffff9479753dc980 RDI: 0000000000000000
[  220.373104] RBP: ffffb72b88c0f988 R08: 000000000001c980 R09: ffffffffc0ea6112
[  220.373184] R10: ffffef17477d9640 R11: ffff9479753dd6c0 R12: ffff9479211c7440
[  220.373264] R13: ffff9478f45b7790 R14: 0000000000000001 R15: ffff9479015ca600
[  220.373345] FS:  00007f555fa3e700(0000) GS:ffff9479753c0000(0000) knlGS:0000000000000000
[  220.373435] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  220.373506] CR2: 0000000000000065 CR3: 0000000196044000 CR4: 00000000000406e0
[  220.373586] Call Trace:
[  220.373627]  nfs4_ff_layout_prepare_ds+0x5e/0x200 [nfs_layout_flexfiles]
[  220.373708]  ff_layout_pg_init_read+0x81/0x160 [nfs_layout_flexfiles]
[  220.373806]  __nfs_pageio_add_request+0x11f/0x4a0 [nfs]
[  220.373886]  ? nfs_create_request.part.14+0x37/0x330 [nfs]
[  220.373967]  nfs_pageio_add_request+0xb2/0x260 [nfs]
[  220.374042]  readpage_async_filler+0xaf/0x280 [nfs]
[  220.374103]  read_cache_pages+0xef/0x1b0
[  220.374166]  ? nfs_read_completion+0x210/0x210 [nfs]
[  220.374239]  nfs_readpages+0x129/0x200 [nfs]
[  220.374293]  __do_page_cache_readahead+0x1d0/0x2f0
[  220.374352]  ondemand_readahead+0x17d/0x2a0
[  220.374403]  page_cache_sync_readahead+0x2e/0x50
[  220.374460]  generic_file_read_iter+0x6c8/0x950
[  220.374532]  ? nfs_mapping_need_revalidate_inode+0x17/0x40 [nfs]
[  220.374617]  nfs_file_read+0x6e/0xc0 [nfs]
[  220.374670]  __vfs_read+0xe2/0x150
[  220.374715]  vfs_read+0x96/0x130
[  220.374758]  SyS_read+0x55/0xc0
[  220.374801]  entry_SYSCALL_64_fastpath+0x1a/0xa9
[  220.374856] RIP: 0033:0x7f555f570bd0
[  220.374900] RSP: 002b:00007ffeb73e1b38 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
[  220.374986] RAX: ffffffffffffffda RBX: 00007f555f839ae0 RCX: 00007f555f570bd0
[  220.375066] RDX: 0000000000020000 RSI: 00007f555fa41000 RDI: 0000000000000003
[  220.375145] RBP: 0000000000021010 R08: ffffffffffffffff R09: 0000000000000000
[  220.375226] R10: 00007f555fa40010 R11: 0000000000000246 R12: 0000000000022000
[  220.375305] R13: 0000000000021010 R14: 0000000000001000 R15: 0000000000002710
[  220.375386] Code: 66 66 90 55 48 89 e5 41 54 53 49 89 fc 48 83 ec 08 48 85 f6 74 2e 48 8b 4e 30 48 89 f3 48 81 f9 00 f0 ff ff 77 1e 48 85 c9 74 15 <48> 83 79 78 00 b8 01 00 00 00 74 2c 48 83 c4 08 5b 41 5c 5d c3
[  220.375653] RIP: ff_layout_mirror_valid+0x2d/0x110 [nfs_layout_flexfiles] RSP: ffffb72b88c0f970
[  220.375748] CR2: 0000000000000065
[  220.403538] ---[ end trace bcdca752211b7da9 ]---
Signed-off-by: Tigran Mkrtchyan <tigran.mkrtchyan@desy.de>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Commit 63d63cbf "NFSv4.1: Don't recheck delegations that
have already been checked" introduced a regression where when a
client received BAD_STATEID error it would not send any TEST_STATEID
and instead go into an infinite loop of resending the IO that caused
the BAD_STATEID.

Fixes: 63d63cbf ("NFSv4.1: Don't recheck delegations that have already been checked")
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Cc: stable@vger.kernel.org # 4.9+
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

In commit d0aeaa83 ("serial: exar:
split out the exar code from 8250_pci") the exar driver got its own
Kconfig.  However the text for the new option was never changed from
the original 8250_PCI text, and hence it appears confusing when you
get asked the same question twice:

  8250/16550 PCI device support (SERIAL_8250_PCI) [Y/n/m/?] (NEW)
    8250/16550 PCI device support (SERIAL_8250_EXAR) [Y/n/m] (NEW)

Adding to the confusion, is that there is no help text for this new
option to indicate it is specific to a certain family of cards.

Fix both issues at the same time, as well as the space vs. tab issues
introduced in the same commit.

Fixes: d0aeaa83 ("serial: exar: split out the exar code from 8250_pci")
Cc: Jiri Slaby <jslaby@suse.com>
Cc: linux-serial@vger.kernel.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Acked-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

A side effect of 89d82324 ("tty/serial: atmel_serial: BUG: stop DMA
from transmitting in stop_tx") is that the console can be called with
TX path disabled. Then the system would hang trying to push charecters
out in atmel_console_putchar().
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Fixes: 89d82324 ("tty/serial: atmel_serial: BUG: stop DMA from transmitting
in stop_tx")
Cc: stable <stable@vger.kernel.org>	#4.4+
Acked-by: Richard Genoud <richard.genoud@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

If uart_flush_buffer() is called between atmel_tx_dma() and
atmel_complete_tx_dma(), the circular buffer has been cleared, but not
atmel_port->tx_len.
That leads to a circular buffer overflow (dumping (UART_XMIT_SIZE -
atmel_port->tx_len) bytes).
Tested-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Richard Genoud <richard.genoud@gmail.com>
Cc: stable <stable@vger.kernel.org> # 3.12+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The reference manual for the i.MX28 recommends to calculate the divisor
as

	divisor = (UARTCLK * 32) / baud rate, rounded to the nearest integer

, so let's do this. For a typical setup of UARTCLK = 24 MHz and baud
rate = 115200 this changes the divisor from 6666 to 6667 and so the
actual baud rate improves from 115211.521 Bd (error ≅ 0.01 %) to
115194.240 Bd (error ≅ 0.005 %).
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>