- 23 Mar, 2019 40 commits
-
-
Florian Fainelli authored
[ Upstream commit c3152ec4 ] We assume in the bcm_sf2 driver that the DSA master network device supports ethtool_ops::{get,set}_wol operations, which is not a given. Avoid de-referencing potentially non-existent function pointers and check them as we should. Fixes: 96e65d7f ("net: dsa: bcm_sf2: add support for Wake-on-LAN") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Florian Fainelli authored
[ Upstream commit a40061ea ] SYSTEMPORT has its RXCHK parser block that attempts to validate the packet structures, unfortunately setting the L2 header check bit will cause Bridge PDUs (BPDUs) to be incorrectly rejected because they look like LLC/SNAP packets with a non-IPv4 or non-IPv6 Ethernet Type. Fixes: 4e8aedfe78c7 ("net: systemport: Turn on offloads by default") Signed-off-by:
-
Anoob Soman authored
[ Upstream commit 79edd00d ] When a target sends Check Condition, whilst initiator is busy xmiting re-queued data, could lead to race between iscsi_complete_task() and iscsi_xmit_task() and eventually crashing with the following kernel backtrace. [3326150.987523] ALERT: BUG: unable to handle kernel NULL pointer dereference at 0000000000000078 [3326150.987549] ALERT: IP: [<ffffffffa05ce70d>] iscsi_xmit_task+0x2d/0xc0 [libiscsi] [3326150.987571] WARN: PGD 569c8067 PUD 569c9067 PMD 0 [3326150.987582] WARN: Oops: 0002 [#1] SMP [3326150.987593] WARN: Modules linked in: tun nfsv3 nfs fscache dm_round_robin [3326150.987762] WARN: CPU: 2 PID: 8399 Comm: kworker/u32:1 Tainted: G O 4.4.0+2 #1 [3326150.987774] WARN: Hardware name: Dell Inc. PowerEdge R720/0W7JN5, BIOS 2.5.4 01/22/2016 [3326150.987790] WARN: Workqueue: iscsi_q_13 iscsi_xmitworker [libiscsi] [3326150.987799] WARN: task: ffff8801d50f3800 ti: ffff8801f5458000 task.ti: ffff8801f5458000 [3326150.987810] WARN: RIP: e030:[<ffffffffa05ce70d>] [<ffffffffa05ce70d>] iscsi_xmit_task+0x2d/0xc0 [libiscsi] [3326150.987825] WARN: RSP: e02b:ffff8801f545bdb0 EFLAGS: 00010246 [3326150.987831] WARN: RAX: 00000000ffffffc3 RBX: ffff880282d2ab20 RCX: ffff88026b6ac480 [3326150.987842] WARN: RDX: 0000000000000000 RSI: 00000000fffffe01 RDI: ffff880282d2ab20 [3326150.987852] WARN: RBP: ffff8801f545bdc8 R08: 0000000000000000 R09: 0000000000000008 [3326150.987862] WARN: R10: 0000000000000000 R11: 000000000000fe88 R12: 0000000000000000 [3326150.987872] WARN: R13: ffff880282d2abe8 R14: ffff880282d2abd8 R15: ffff880282d2ac08 [3326150.987890] WARN: FS: 00007f5a866b4840(0000) GS:ffff88028a640000(0000) knlGS:0000000000000000 [3326150.987900] WARN: CS: e033 DS: 0000 ES: 0000 CR0: 0000000080050033 [3326150.987907] WARN: CR2: 0000000000000078 CR3: 0000000070244000 CR4: 0000000000042660 [3326150.987918] WARN: Stack: [3326150.987924] WARN: ffff880282d2ad58 ffff880282d2ab20 ffff880282d2abe8 ffff8801f545be18 [3326150.987938] WARN: ffffffffa05cea90 ffff880282d2abf8 ffff88026b59cc80 ffff88026b59cc00 [3326150.987951] WARN: ffff88022acf32c0 ffff880289491800 ffff880255a80800 0000000000000400 [3326150.987964] WARN: Call Trace: [3326150.987975] WARN: [<ffffffffa05cea90>] iscsi_xmitworker+0x2f0/0x360 [libiscsi] [3326150.987988] WARN: [<ffffffff8108862c>] process_one_work+0x1fc/0x3b0 [3326150.987997] WARN: [<ffffffff81088f95>] worker_thread+0x2a5/0x470 [3326150.988006] WARN: [<ffffffff8159cad8>] ? __schedule+0x648/0x870 [3326150.988015] WARN: [<ffffffff81088cf0>] ? rescuer_thread+0x300/0x300 [3326150.988023] WARN: [<ffffffff8108ddf5>] kthread+0xd5/0xe0 [3326150.988031] WARN: [<ffffffff8108dd20>] ? kthread_stop+0x110/0x110 [3326150.988040] WARN: [<ffffffff815a0bcf>] ret_from_fork+0x3f/0x70 [3326150.988048] WARN: [<ffffffff8108dd20>] ? kthread_stop+0x110/0x110 [3326150.988127] ALERT: RIP [<ffffffffa05ce70d>] iscsi_xmit_task+0x2d/0xc0 [libiscsi] [3326150.988138] WARN: RSP <ffff8801f545bdb0> [3326150.988144] WARN: CR2: 0000000000000078 [3326151.020366] WARN: ---[ end trace 1c60974d4678d81b ]--- Commit 6f8830f5 ("scsi: libiscsi: add lock around task lists to fix list corruption regression") introduced "taskqueuelock" to fix list corruption during the race, but this wasn't enough. Re-setting of conn->task to NULL, could race with iscsi_xmit_task(). iscsi_complete_task() { .... if (conn->task == task) conn->task = NULL; } conn->task in iscsi_xmit_task() could be NULL and so will be task. __iscsi_get_task(task) will crash (NullPtr de-ref), trying to access refcount. iscsi_xmit_task() { struct iscsi_task *task = conn->task; __iscsi_get_task(task); } This commit will take extra conn->session->back_lock in iscsi_xmit_task() to ensure iscsi_xmit_task() waits for iscsi_complete_task(), if iscsi_complete_task() wins the race. If iscsi_xmit_task() wins the race, iscsi_xmit_task() increments task->refcount (__iscsi_get_task) ensuring iscsi_complete_task() will not iscsi_free_task(). Signed-off-by:
Anoob Soman <anoob.soman@citrix.com> Signed-off-by:
Bob Liu <bob.liu@oracle.com> Acked-by:
Lee Duncan <lduncan@suse.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
David Howells authored
[ Upstream commit 822ad64d ] In the request_key() upcall mechanism there's a dependency loop by which if a key type driver overrides the ->request_key hook and the userspace side manages to lose the authorisation key, the auth key and the internal construction record (struct key_construction) can keep each other pinned. Fix this by the following changes: (1) Killing off the construction record and using the auth key instead. (2) Including the operation name in the auth key payload and making the payload available outside of security/keys/. (3) The ->request_key hook is given the authkey instead of the cons record and operation name. Changes (2) and (3) allow the auth key to naturally be cleaned up if the keyring it is in is destroyed or cleared or the auth key is unlinked. Fixes: 7ee02a316600 ("keys: Fix dependency loop between construction record and auth key") Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
James Morris <james.morris@microsoft.com> Signed-off-by:
-
David Howells authored
[ Upstream commit bb2ba2d7 ] Fix the creation of shortcuts for which the length of the index key value is an exact multiple of the machine word size. The problem is that the code that blanks off the unused bits of the shortcut value malfunctions if the number of bits in the last word equals machine word size. This is due to the "<<" operator being given a shift of zero in this case, and so the mask that should be all zeros is all ones instead. This causes the subsequent masking operation to clear everything rather than clearing nothing. Ordinarily, the presence of the hash at the beginning of the tree index key makes the issue very hard to test for, but in this case, it was encountered due to a development mistake that caused the hash output to be either 0 (keyring) or 1 (non-keyring) only. This made it susceptible to the keyctl/unlink/valid test in the keyutils package. The fix is simply to skip the blanking if the shift would be 0. For example, an index key that is 64 bits long would produce a 0 shift and thus a 'blank' of all 1s. This would then be inverted and AND'd onto the index_key, incorrectly clearing the entire last word. Fixes: 3cb98950 ("Add a generic associative array implementation.") Signed-off-by:
-
Robin Murphy authored
[ Upstream commit fc67e6f1 ] Installing the appropriate non-IOMMU DMA ops in arm_iommu_detch_device() serves the case where IOMMU-aware drivers choose to control their own mapping but still make DMA API calls, however it also affects the case when the arch code itself tears down the mapping upon driver unbinding, where the ops now get left in place and can inhibit arch_setup_dma_ops() on subsequent re-probe attempts. Fix the latter case by making sure that arch_teardown_dma_ops() cleans up whenever the ops were automatically installed by its counterpart. Reported-by:
Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Reported-by:
Marek Szyprowski <m.szyprowski@samsung.com> Fixes: 1874619a "ARM: dma-mapping: Set proper DMA ops in arm_iommu_detach_device()" Tested-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
Robin Murphy <robin.murphy@arm.com> Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Sean Tranchetti authored
[ Upstream commit fc2d5cfd ] Attempting to avoid cloning the skb when broadcasting by inflating the refcount with sock_hold/sock_put while under RCU lock is dangerous and violates RCU principles. It leads to subtle race conditions when attempting to free the SKB, as we may reference sockets that have already been freed by the stack. Unable to handle kernel paging request at virtual address 6b6b6b6b6b6c4b [006b6b6b6b6b6c4b] address between user and kernel address ranges Internal error: Oops: 96000004 [#1] PREEMPT SMP task: fffffff78f65b380 task.stack: ffffff8049a88000 pc : sock_rfree+0x38/0x6c lr : skb_release_head_state+0x6c/0xcc Process repro (pid: 7117, stack limit = 0xffffff8049a88000) Call trace: sock_rfree+0x38/0x6c skb_release_head_state+0x6c/0xcc skb_release_all+0x1c/0x38 __kfree_skb+0x1c/0x30 kfree_skb+0xd0/0xf4 pfkey_broadcast+0x14c/0x18c pfkey_sendmsg+0x1d8/0x408 sock_sendmsg+0x44/0x60 ___sys_sendmsg+0x1d0/0x2a8 __sys_sendmsg+0x64/0xb4 SyS_sendmsg+0x34/0x4c el0_svc_naked+0x34/0x38 Kernel panic - not syncing: Fatal exception Suggested-by:
Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
Sean Tranchetti <stranche@codeaurora.org> Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
-
Alexei Starovoitov authored
[ Upstream commit 3defaf2f ] Lockdep warns about false positive: [ 11.211460] ------------[ cut here ]------------ [ 11.211936] DEBUG_LOCKS_WARN_ON(depth <= 0) [ 11.211985] WARNING: CPU: 0 PID: 141 at ../kernel/locking/lockdep.c:3592 lock_release+0x1ad/0x280 [ 11.213134] Modules linked in: [ 11.214954] RIP: 0010:lock_release+0x1ad/0x280 [ 11.223508] Call Trace: [ 11.223705] <IRQ> [ 11.223874] ? __local_bh_enable+0x7a/0x80 [ 11.224199] up_read+0x1c/0xa0 [ 11.224446] do_up_read+0x12/0x20 [ 11.224713] irq_work_run_list+0x43/0x70 [ 11.225030] irq_work_run+0x26/0x50 [ 11.225310] smp_irq_work_interrupt+0x57/0x1f0 [ 11.225662] irq_work_interrupt+0xf/0x20 since rw_semaphore is released in a different task vs task that locked the sema. It is expected behavior. Fix the warning with up_read_non_owner() and rwsem_release() annotation. Fixes: bae77c5e ("bpf: enable stackmap with build_id in nmi context") Signed-off-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
-
Willem de Bruijn authored
[ Upstream commit b90efd22 ] bpf_skb_change_proto and bpf_skb_adjust_room change skb header length. For GSO packets they adjust gso_size to maintain the same MTU. The gso size can only be safely adjusted on bytestream protocols. Commit d02f51cb ("bpf: fix bpf_skb_adjust_net/bpf_skb_proto_xlat to deal with gso sctp skbs") excluded SKB_GSO_SCTP. Since then type SKB_GSO_UDP_L4 has been added, whose contents are one gso_size unit per datagram. Also exclude these. Move from a blacklist to a whitelist check to future proof against additional such new GSO types, e.g., for fraglist based GRO. Fixes: bec1f6f6 ("udp: generate gso with UDP_SEGMENT") Signed-off-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
-
Dietmar Eggemann authored
[ Upstream commit 1b5ba350 ] Arm TC2 fails cpu hotplug stress test. This issue was tracked down to a missing copy of the new affinity cpumask for the vexpress-spc interrupt into struct irq_common_data.affinity when the interrupt is migrated in migrate_one_irq(). Fix it by replacing the arm specific hotplug cpu migration with the generic irq code. This is the counterpart implementation to commit 217d453d ("arm64: fix a migrating irq bug when hotplug cpu"). Tested with cpu hotplug stress test on Arm TC2 (multi_v7_defconfig plus CONFIG_ARM_BIG_LITTLE_CPUFREQ=y and CONFIG_ARM_VEXPRESS_SPC_CPUFREQ=y). The vexpress-spc interrupt (irq=22) on this board is affine to CPU0. Its affinity cpumask now changes correctly e.g. from 0 to 1-4 when CPU0 is hotplugged out. Suggested-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
Dietmar Eggemann <dietmar.eggemann@arm.com> Acked-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Martin Willi authored
[ Upstream commit 09db5124 ] On ESP output, sk_wmem_alloc is incremented for the added padding if a socket is associated to the skb. When replying with TCP SYNACKs over IPsec, the associated sk is a casted request socket, only. Increasing sk_wmem_alloc on a request socket results in a write at an arbitrary struct offset. In the best case, this produces the following WARNING: WARNING: CPU: 1 PID: 0 at lib/refcount.c:102 esp_output_head+0x2e4/0x308 [esp4] refcount_t: addition on 0; use-after-free. CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.0.0-rc3 #2 Hardware name: Marvell Armada 380/385 (Device Tree) [...] [<bf0ff354>] (esp_output_head [esp4]) from [<bf1006a4>] (esp_output+0xb8/0x180 [esp4]) [<bf1006a4>] (esp_output [esp4]) from [<c05dee64>] (xfrm_output_resume+0x558/0x664) [<c05dee64>] (xfrm_output_resume) from [<c05d07b0>] (xfrm4_output+0x44/0xc4) [<c05d07b0>] (xfrm4_output) from [<c05956bc>] (tcp_v4_send_synack+0xa8/0xe8) [<c05956bc>] (tcp_v4_send_synack) from [<c0586ad8>] (tcp_conn_request+0x7f4/0x948) [<c0586ad8>] (tcp_conn_request) from [<c058c404>] (tcp_rcv_state_process+0x2a0/0xe64) [<c058c404>] (tcp_rcv_state_process) from [<c05958ac>] (tcp_v4_do_rcv+0xf0/0x1f4) [<c05958ac>] (tcp_v4_do_rcv) from [<c0598a4c>] (tcp_v4_rcv+0xdb8/0xe20) [<c0598a4c>] (tcp_v4_rcv) from [<c056eb74>] (ip_protocol_deliver_rcu+0x2c/0x2dc) [<c056eb74>] (ip_protocol_deliver_rcu) from [<c056ee6c>] (ip_local_deliver_finish+0x48/0x54) [<c056ee6c>] (ip_local_deliver_finish) from [<c056eecc>] (ip_local_deliver+0x54/0xec) [<c056eecc>] (ip_local_deliver) from [<c056efac>] (ip_rcv+0x48/0xb8) [<c056efac>] (ip_rcv) from [<c0519c2c>] (__netif_receive_skb_one_core+0x50/0x6c) [...] The issue triggers only when not using TCP syncookies, as for syncookies no socket is associated. Fixes: cac2661c ("esp4: Avoid skb_cow_data whenever possible") Fixes: 03e2a30f ("esp6: Avoid skb_cow_data whenever possible") Signed-off-by:
Martin Willi <martin@strongswan.org> Signed-off-by:
-
Andre Przywara authored
[ Upstream commit ee0b27a3 ] According to the manual the gate clock for MMC3 is at bit 11, and NAND1 is controlled by bit 12. Fix the gate bit definitions in the clock driver. Fixes: c6e6c96d ("clk: sunxi-ng: Add A31/A31s clocks") Signed-off-by:
Andre Przywara <andre.przywara@arm.com> Signed-off-by:
Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by:
-
Eugene Loh authored
[ Upstream commit 6db2983c ] When checking for symbols with excessively long names, account for null terminating character. Fixes: f3462aa9 ("Kbuild: Handle longer symbols in kallsyms.c") Signed-off-by:
Eugene Loh <eugene.loh@oracle.com> Acked-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
-
Paul Kocialkowski authored
[ Upstream commit 5c59801f ] According to the datasheet and the reference code from Allwinner, the bit used to de-assert the TCON reset is bit 4, not bit 3. Fix it in the V3s CCU driver. Signed-off-by:
Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by:
-
Gabriel Fernandez authored
[ Upstream commit 2439d37e ] This patch fixes the following static checker warning: drivers/input/keyboard/st-keyscan.c:156 keyscan_probe() error: potential zalloc NULL dereference: 'keypad_data->input_dev' Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Gabriel Fernandez <gabriel.fernandez@st.com> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Miguel Ojeda authored
[ Upstream commit 69ef9bc5 ] On module unload/remove, we need to ensure that work does not run after we have freed resources. Concretely, cancel_delayed_work() may return while the callback function is still running. From kernel/workqueue.c: The work callback function may still be running on return, unless it returns true and the work doesn't re-arm itself. Explicitly flush or use cancel_delayed_work_sync() to wait on it. Link: https://lore.kernel.org/lkml/20190204220952.30761-1-TheSven73@googlemail.com/Reported-by:
Sven Van Asbroeck <thesven73@gmail.com> Reviewed-by:
Robin van der Gracht <robin@protonic.nl> Signed-off-by:
Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> Signed-off-by:
-
Paul Kocialkowski authored
[ Upstream commit f275a465 ] The driver's interrupt handler checks whether a message is currently being handled with the curr_msg pointer. When it is NULL, the interrupt is considered to be unexpected. Similarly, the i2c_start_transfer routine checks for the remaining number of messages to handle in num_msgs. However, these values are never cleared and always keep the message and number relevant to the latest transfer (which might be done already and the underlying message memory might have been freed). When an unexpected interrupt hits with the DONE bit set, the isr will then try to access the flags field of the curr_msg structure, leading to a fatal page fault. The msg_buf and msg_buf_remaining fields are also never cleared at the end of the transfer, which can lead to similar pitfalls. Fix these issues by introducing a cleanup function and always calling it after a transfer is finished. Fixes: e2474541 ("i2c: bcm2835: Fix hang for writing messages larger than 16 bytes") Signed-off-by:
Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
Shubhrajyoti Datta authored
[ Upstream commit d358def7 ] In case the hold bit is not needed we are carrying the old values. Fix the same by resetting the bit when not needed. Fixes the sporadic i2c bus lockups on National Instruments Zynq-based devices. Fixes: df8eb569 ("i2c: Add driver for Cadence I2C controller") Reported-by:
Kyle Roeschley <kyle.roeschley@ni.com> Acked-by:
Michal Simek <michal.simek@xilinx.com> Signed-off-by:
Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Tested-by:
-
Huang Zijiang authored
[ Upstream commit c969c6e7 ] The of_find_device_by_node() takes a reference to the underlying device structure, we should release that reference. Signed-off-by:
Huang Zijiang <huang.zijiang@zte.com.cn> Signed-off-by:
-
Jann Horn authored
[ Upstream commit 2c2ade81 ] The basic idea behind ->pagecnt_bias is: If we pre-allocate the maximum number of references that we might need to create in the fastpath later, the bump-allocation fastpath only has to modify the non-atomic bias value that tracks the number of extra references we hold instead of the atomic refcount. The maximum number of allocations we can serve (under the assumption that no allocation is made with size 0) is nc->size, so that's the bias used. However, even when all memory in the allocation has been given away, a reference to the page is still held; and in the `offset < 0` slowpath, the page may be reused if everyone else has dropped their references. This means that the necessary number of references is actually `nc->size+1`. Luckily, from a quick grep, it looks like the only path that can call page_frag_alloc(fragsz=1) is TAP with the IFF_NAPI_FRAGS flag, which requires CAP_NET_ADMIN in the init namespace and is only intended to be used for kernel testing and fuzzing. To test for this issue, put a `WARN_ON(page_ref_count(page) == 0)` in the `offset < 0` path, below the virt_to_page() call, and then repeatedly call writev() on a TAP device with IFF_TAP|IFF_NO_PI|IFF_NAPI_FRAGS|IFF_NAPI, with a vector consisting of 15 elements containing 1 byte each. Signed-off-by:
Jann Horn <jannh@google.com> Signed-off-by:
-
Rajneesh Bhardwaj authored
[ Upstream commit 8cd8f0ce ] Add the CPUID model number of Icelake (ICL) mobile processors to the Intel family list. Icelake U/Y series uses model number 0x7E. Signed-off-by:
Rajneesh Bhardwaj <rajneesh.bhardwaj@linux.intel.com> Signed-off-by:
Borislav Petkov <bp@suse.de> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: "David E. Box" <david.e.box@intel.com> Cc: dvhart@infradead.org Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: platform-driver-x86@vger.kernel.org Cc: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: x86-ml <x86@kernel.org> Link: https://lkml.kernel.org/r/20190214115712.19642-2-rajneesh.bhardwaj@linux.intel.comSigned-off-by:
-
Dan Carpenter authored
[ Upstream commit 8d6ea932 ] The value of ->num_ports comes from bcm_sf2_sw_probe() and it is less than or equal to DSA_MAX_PORTS. The ds->ports[] array is used inside the dsa_is_user_port() and dsa_is_cpu_port() functions. The ds->ports[] array is allocated in dsa_switch_alloc() and it has ds->num_ports elements so this leads to a static checker warning about a potential out of bounds read. Fixes: 8cfa9498 ("net: dsa: bcm_sf2: add suspend/resume callbacks") Signed-off-by:
Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by:
-
Bill Kuzeja authored
[ Upstream commit 388a4995 ] In qla2x00_async_tm_cmd, we reference off sp after it has been freed. This caused a panic on a system running a slub debug kernel. Since fcport is passed in anyways, just use that instead. Signed-off-by:
Bill Kuzeja <william.kuzeja@stratus.com> Acked-by:
Giridhar Malavali <gmalavali@marvell.com> Acked-by:
Himanshu Madhani <hmadhani@marvell.com> Signed-off-by:
-
Qian Cai authored
[ Upstream commit 2f1ee091 ] This reverts commit fe53ca54 ("mm: use early_pfn_to_nid in page_ext_init"). When booting a system with "page_owner=on", start_kernel page_ext_init invoke_init_callbacks init_section_page_ext init_page_owner init_early_allocated_pages init_zones_in_node init_pages_in_zone lookup_page_ext page_to_nid The issue here is that page_to_nid() will not work since some page flags have no node information until later in page_alloc_init_late() due to DEFERRED_STRUCT_PAGE_INIT. Hence, it could trigger an out-of-bounds access with an invalid nid. UBSAN: Undefined behaviour in ./include/linux/mm.h:1104:50 index 7 is out of range for type 'zone [5]' Also, kernel will panic since flags were poisoned earlier with, CONFIG_DEBUG_VM_PGFLAGS=y CONFIG_NODE_NOT_IN_PAGE_FLAGS=n start_kernel setup_arch pagetable_init paging_init sparse_init sparse_init_nid memblock_alloc_try_nid_raw It did not handle it well in init_pages_in_zone() which ends up calling page_to_nid(). page:ffffea0004200000 is uninitialized and poisoned raw: ffffffffffffffff ffffffffffffffff ffffffffffffffff ffffffffffffffff raw: ffffffffffffffff ffffffffffffffff ffffffffffffffff ffffffffffffffff page dumped because: VM_BUG_ON_PAGE(PagePoisoned(p)) page_owner info is not active (free page?) kernel BUG at include/linux/mm.h:990! RIP: 0010:init_page_owner+0x486/0x520 This means that assumptions behind commit fe53ca54 ("mm: use early_pfn_to_nid in page_ext_init") are incomplete. Therefore, revert the commit for now. A proper way to move the page_owner initialization to sooner is to hook into memmap initialization. Link: http://lkml.kernel.org/r/20190115202812.75820-1-cai@lca.pwSigned-off-by:
Qian Cai <cai@lca.pw> Acked-by:
Michal Hocko <mhocko@kernel.org> Cc: Pasha Tatashin <Pavel.Tatashin@microsoft.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Yang Shi <yang.shi@linaro.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Yu Zhao authored
[ Upstream commit 414fd080 ] For dax pmd, pmd_trans_huge() returns false but pmd_huge() returns true on x86. So the function works as long as hugetlb is configured. However, dax doesn't depend on hugetlb. Link: http://lkml.kernel.org/r/20190111034033.601-1-yuzhao@google.comSigned-off-by:
Yu Zhao <yuzhao@google.com> Reviewed-by:
Jan Kara <jack@suse.cz> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Keith Busch <keith.busch@intel.com> Cc: "Michael S . Tsirkin" <mst@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com> Signed-off-by:
-
Benjamin Coddington authored
[ Upstream commit d2ceb7e5 ] If nfs_page_async_flush() removes the page from the mapping, then we can't use page_file_mapping() on it as nfs_updatepate() is wont to do when receiving an error. Instead, push the mapping to the stack before the page is possibly truncated. Fixes: 8fc75bed ("NFS: Fix up return value on fatal errors in nfs_page_async_flush()") Signed-off-by:
Benjamin Coddington <bcodding@redhat.com> Signed-off-by:
Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by:
-
Nicolas Morey-Chaisemartin authored
[ Upstream commit a4cb5bdb ] Make sure the device has at least 2 completion vectors before allocating to compvec#1 Fixes: a4699f56 (xprtrdma: Put Send CQ in IB_POLL_WORKQUEUE mode) Signed-off-by:
Nicolas Morey-Chaisemartin <nmoreychaisemartin@suse.com> Reviewed-by:
Chuck Lever <chuck.lever@oracle.com> Signed-off-by:
-
Yufen Yu authored
[ Upstream commit 96d7cb93 ] floppy_check_events() is supposed to return bit flags to say which events occured. We should return zero to say that no event flags are set. Only BIT(0) and BIT(1) are used in the caller. And .check_events interface also expect to return an unsigned int value. However, after commit a0c80efe, it may return -EINTR (-4u). Here, both BIT(0) and BIT(1) are cleared. So this patch shouldn't affect runtime, but it obviously is still worth fixing. Reviewed-by:
Yufen Yu <yuyufen@huawei.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Andrea Claudi authored
[ Upstream commit 098e13f5 ] ipvs relies on nf_defrag_ipv6 module to manage IPv6 fragmentation, but lacks proper Kconfig dependencies and does not explicitly request defrag features. As a result, if netfilter hooks are not loaded, when IPv6 fragmented packet are handled by ipvs only the first fragment makes through. Fix it properly declaring the dependency on Kconfig and registering netfilter hooks on ip_vs_add_service() and ip_vs_new_dest(). Reported-by:
Li Shuang <shuali@redhat.com> Signed-off-by:
Andrea Claudi <aclaudi@redhat.com> Acked-by:
Julian Anastasov <ja@ssi.bg> Acked-by:
Simon Horman <horms@verge.net.au> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Jianchao Wang authored
[ Upstream commit aef1897c ] When requeue, if RQF_DONTPREP, rq has contained some driver specific data, so insert it to hctx dispatch list to avoid any merge. Take scsi as example, here is the trace event log (no io scheduler, because RQF_STARTED would prevent merging), kworker/0:1H-339 [000] ...1 2037.209289: block_rq_insert: 8,0 R 4096 () 32768 + 8 [kworker/0:1H] scsi_inert_test-1987 [000] .... 2037.220465: block_bio_queue: 8,0 R 32776 + 8 [scsi_inert_test] scsi_inert_test-1987 [000] ...2 2037.220466: block_bio_backmerge: 8,0 R 32776 + 8 [scsi_inert_test] kworker/0:1H-339 [000] .... 2047.220913: block_rq_issue: 8,0 R 8192 () 32768 + 16 [kworker/0:1H] scsi_inert_test-1996 [000] ..s1 2047.221007: block_rq_complete: 8,0 R () 32768 + 8 [0] scsi_inert_test-1996 [000] .Ns1 2047.221045: block_rq_requeue: 8,0 R () 32776 + 8 [0] kworker/0:1H-339 [000] ...1 2047.221054: block_rq_insert: 8,0 R 4096 () 32776 + 8 [kworker/0:1H] kworker/0:1H-339 [000] ...1 2047.221056: block_rq_issue: 8,0 R 4096 () 32776 + 8 [kworker/0:1H] scsi_inert_test-1986 [000] ..s1 2047.221119: block_rq_complete: 8,0 R () 32776 + 8 [0] (32768 + 8) was requeued by scsi_queue_insert and had RQF_DONTPREP. Then it was merged with (32776 + 8) and issued. Due to RQF_DONTPREP, the sdb only contained the part of (32768 + 8), then only that part was completed. The lucky thing was that scsi_io_completion detected it and requeued the remaining part. So we didn't get corrupted data. However, the requeue of (32776 + 8) is not expected. Suggested-by:
Jianchao Wang <jianchao.w.wang@oracle.com> Signed-off-by:
-
Francesco Ruggeri authored
[ Upstream commit 8d29d16d ] If a non zero value happens to be in xt[NFPROTO_BRIDGE].cur at init time, the following panic can be caused by running % ebtables -t broute -F BROUTING from a 32-bit user level on a 64-bit kernel. This patch replaces kmalloc_array with kcalloc when allocating xt. [ 474.680846] BUG: unable to handle kernel paging request at 0000000009600920 [ 474.687869] PGD 2037006067 P4D 2037006067 PUD 2038938067 PMD 0 [ 474.693838] Oops: 0000 [#1] SMP [ 474.697055] CPU: 9 PID: 4662 Comm: ebtables Kdump: loaded Not tainted 4.19.17-11302235.AroraKernelnext.fc18.x86_64 #1 [ 474.707721] Hardware name: Supermicro X9DRT/X9DRT, BIOS 3.0 06/28/2013 [ 474.714313] RIP: 0010:xt_compat_calc_jump+0x2f/0x63 [x_tables] [ 474.720201] Code: 40 0f b6 ff 55 31 c0 48 6b ff 70 48 03 3d dc 45 00 00 48 89 e5 8b 4f 6c 4c 8b 47 60 ff c9 39 c8 7f 2f 8d 14 08 d1 fa 48 63 fa <41> 39 34 f8 4c 8d 0c fd 00 00 00 00 73 05 8d 42 01 eb e1 76 05 8d [ 474.739023] RSP: 0018:ffffc9000943fc58 EFLAGS: 00010207 [ 474.744296] RAX: 0000000000000000 RBX: ffffc90006465000 RCX: 0000000002580249 [ 474.751485] RDX: 00000000012c0124 RSI: fffffffff7be17e9 RDI: 00000000012c0124 [ 474.758670] RBP: ffffc9000943fc58 R08: 0000000000000000 R09: ffffffff8117cf8f [ 474.765855] R10: ffffc90006477000 R11: 0000000000000000 R12: 0000000000000001 [ 474.773048] R13: 0000000000000000 R14: ffffc9000943fcb8 R15: ffffc9000943fcb8 [ 474.780234] FS: 0000000000000000(0000) GS:ffff88a03f840000(0063) knlGS:00000000f7ac7700 [ 474.788612] CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033 [ 474.794632] CR2: 0000000009600920 CR3: 0000002037422006 CR4: 00000000000606e0 [ 474.802052] Call Trace: [ 474.804789] compat_do_replace+0x1fb/0x2a3 [ebtables] [ 474.810105] compat_do_ebt_set_ctl+0x69/0xe6 [ebtables] [ 474.815605] ? try_module_get+0x37/0x42 [ 474.819716] compat_nf_setsockopt+0x4f/0x6d [ 474.824172] compat_ip_setsockopt+0x7e/0x8c [ 474.828641] compat_raw_setsockopt+0x16/0x3a [ 474.833220] compat_sock_common_setsockopt+0x1d/0x24 [ 474.838458] __compat_sys_setsockopt+0x17e/0x1b1 [ 474.843343] ? __check_object_size+0x76/0x19a [ 474.847960] __ia32_compat_sys_socketcall+0x1cb/0x25b [ 474.853276] do_fast_syscall_32+0xaf/0xf6 [ 474.857548] entry_SYSENTER_compat+0x6b/0x7a Signed-off-by:
Francesco Ruggeri <fruggeri@arista.com> Acked-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
-
Ilan Peer authored
[ Upstream commit 6157ca0d ] When mac80211 requests the low level driver to stop an ongoing Tx aggregation, the low level driver is expected to call ieee80211_stop_tx_ba_cb_irqsafe() to indicate that it is ready to stop the session. The callback in turn schedules a worker to complete the session tear down, which in turn also handles the relevant state for the intermediate Tx queue. However, as this flow in asynchronous, the intermediate queue should be stopped and not continue servicing frames, as in such a case frames that are dequeued would be marked as part of an aggregation, although the aggregation is already been stopped. Fix this by stopping the intermediate Tx queue, before calling the low level driver to stop the Tx aggregation. Signed-off-by:
Ilan Peer <ilan.peer@intel.com> Signed-off-by:
Luca Coelho <luciano.coelho@intel.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Johannes Berg authored
[ Upstream commit 4926b51b ] If a driver does any significant activity in its ibss_join method, then it will very well expect that to be called during restart, before any stations are added. Do that. Signed-off-by:
-
Dmitry Torokhov authored
[ Upstream commit a342083a ] We should be using flush_delayed_work() instead of flush_work() in matrix_keypad_stop() to ensure that we are not missing work that is scheduled but not yet put in the workqueue (i.e. its delay timer has not expired yet). Signed-off-by:
-
Dmitry Torokhov authored
[ Upstream commit 33a841ce ] To ensure that TX work is not running after serio port has been torn down, let's flush it when closing the port. Reported-by:
Danilo Krummrich <danilokrummrich@dk-develop.de> Reviewed-by:
-
Dmitry Torokhov authored
[ Upstream commit 62844288 ] Updating LED state requires access to regmap and therefore we may sleep, so we could not do that directly form set_brightness() method. Historically we used private work to adjust the brightness, but with the introduction of set_brightness_blocking() we no longer need it. As a bonus, not having our own work item means we do not have use-after-free issue as we neglected to cancel outstanding work on driver unbind. Reported-by:
Sven Van Asbroeck <TheSven73@googlemail.com> Acked-by:
Jacek Anaszewski <jacek.anaszewski@gmail.com> Signed-off-by:
-
Russell King authored
[ Upstream commit 50d6b3cf ] If we have a kernel configured for periodic timer interrupts, and we have cpuidle enabled, then we end up with CPU1 losing timer interupts after a hotplug. This can manifest itself in RCU stall warnings, or userspace becoming unresponsive. The problem is that the kernel initially wants to use the TWD timer for interrupts, but the TWD loses context when we enter the C3 cpuidle state. Nothing reprograms the TWD after idle. We have solved this in the past by switching to broadcast timer ticks, and cpuidle44xx switches to that mode at boot time. However, there is nothing to switch from periodic mode local timers after a hotplug operation. We call tick_broadcast_enter() in omap_enter_idle_coupled(), which one would expect would take care of the issue, but internally this only deals with one-shot local timers - tick_broadcast_enable() on the other hand only deals with periodic local timers. So, we need to call both. Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Sylwester Nawrocki authored
[ Upstream commit 860b454c ] This patch moves clk_get_rate() call from trigger() to hw_params() callback to avoid calling sleeping clk API from atomic context and prevent deadlock as indicated below. Before this change clk_get_rate() was being called with same spinlock held as the one passed to the clk API when registering clocks exposed by the I2S driver. [ 82.109780] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:908 [ 82.117009] in_atomic(): 1, irqs_disabled(): 128, pid: 1554, name: speaker-test [ 82.124235] 3 locks held by speaker-test/1554: [ 82.128653] #0: cc8c5328 (snd_pcm_link_rwlock){...-}, at: snd_pcm_stream_lock_irq+0x20/0x38 [ 82.137058] #1: ec9eda17 (&(&substream->self_group.lock)->rlock){..-.}, at: snd_pcm_ioctl+0x900/0x1268 [ 82.146417] #2: 6ac279bf (&(&pri_dai->spinlock)->rlock){..-.}, at: i2s_trigger+0x64/0x6d4 [ 82.154650] irq event stamp: 8144 [ 82.157949] hardirqs last enabled at (8143): [<c0a0f574>] _raw_read_unlock_irq+0x24/0x5c [ 82.166089] hardirqs last disabled at (8144): [<c0a0f6a8>] _raw_read_lock_irq+0x18/0x58 [ 82.174063] softirqs last enabled at (8004): [<c01024e4>] __do_softirq+0x3a4/0x66c [ 82.181688] softirqs last disabled at (7997): [<c012d730>] irq_exit+0x140/0x168 [ 82.188964] Preemption disabled at: [ 82.188967] [<00000000>] (null) [ 82.195728] CPU: 6 PID: 1554 Comm: speaker-test Not tainted 5.0.0-rc5-00192-ga6e6caca8f03 #191 [ 82.204302] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 82.210376] [<c0111a54>] (unwind_backtrace) from [<c010d8f4>] (show_stack+0x10/0x14) [ 82.218084] [<c010d8f4>] (show_stack) from [<c09ef004>] (dump_stack+0x90/0xc8) [ 82.225278] [<c09ef004>] (dump_stack) from [<c0152980>] (___might_sleep+0x22c/0x2c8) [ 82.232990] [<c0152980>] (___might_sleep) from [<c0a0a2e4>] (__mutex_lock+0x28/0xa3c) [ 82.240788] [<c0a0a2e4>] (__mutex_lock) from [<c0a0ad80>] (mutex_lock_nested+0x1c/0x24) [ 82.248763] [<c0a0ad80>] (mutex_lock_nested) from [<c04923dc>] (clk_prepare_lock+0x78/0xec) [ 82.257079] [<c04923dc>] (clk_prepare_lock) from [<c049538c>] (clk_core_get_rate+0xc/0x5c) [ 82.265309] [<c049538c>] (clk_core_get_rate) from [<c0766b18>] (i2s_trigger+0x490/0x6d4) [ 82.273369] [<c0766b18>] (i2s_trigger) from [<c074fec4>] (soc_pcm_trigger+0x100/0x140) [ 82.281254] [<c074fec4>] (soc_pcm_trigger) from [<c07378a0>] (snd_pcm_do_start+0x2c/0x30) [ 82.289400] [<c07378a0>] (snd_pcm_do_start) from [<c07376cc>] (snd_pcm_action_single+0x38/0x78) [ 82.298065] [<c07376cc>] (snd_pcm_action_single) from [<c073a450>] (snd_pcm_ioctl+0x910/0x1268) [ 82.306734] [<c073a450>] (snd_pcm_ioctl) from [<c0292344>] (do_vfs_ioctl+0x90/0x9ec) [ 82.314443] [<c0292344>] (do_vfs_ioctl) from [<c0292cd4>] (ksys_ioctl+0x34/0x60) [ 82.321808] [<c0292cd4>] (ksys_ioctl) from [<c0101000>] (ret_fast_syscall+0x0/0x28) [ 82.329431] Exception stack(0xeb875fa8 to 0xeb875ff0) [ 82.334459] 5fa0: 00033c18 b6e31000 00000004 00004142 00033d80 00033d80 [ 82.342605] 5fc0: 00033c18 b6e31000 00008000 00000036 00008000 00000000 beea38a8 00008000 [ 82.350748] 5fe0: b6e3142c beea384c b6da9a30 b6c9212c [ 82.355789] [ 82.357245] ====================================================== [ 82.363397] WARNING: possible circular locking dependency detected [ 82.369551] 5.0.0-rc5-00192-ga6e6caca8f03 #191 Tainted: G W [ 82.376395] ------------------------------------------------------ [ 82.382548] speaker-test/1554 is trying to acquire lock: [ 82.387834] 6d2007f4 (prepare_lock){+.+.}, at: clk_prepare_lock+0x78/0xec [ 82.394593] [ 82.394593] but task is already holding lock: [ 82.400398] 6ac279bf (&(&pri_dai->spinlock)->rlock){..-.}, at: i2s_trigger+0x64/0x6d4 [ 82.408197] [ 82.408197] which lock already depends on the new lock. [ 82.416343] [ 82.416343] the existing dependency chain (in reverse order) is: [ 82.423795] [ 82.423795] -> #1 (&(&pri_dai->spinlock)->rlock){..-.}: [ 82.430472] clk_mux_set_parent+0x34/0xb8 [ 82.434975] clk_core_set_parent_nolock+0x1c4/0x52c [ 82.440347] clk_set_parent+0x38/0x6c [ 82.444509] of_clk_set_defaults+0xc8/0x308 [ 82.449186] of_clk_add_provider+0x84/0xd0 [ 82.453779] samsung_i2s_probe+0x408/0x5f8 [ 82.458376] platform_drv_probe+0x48/0x98 [ 82.462879] really_probe+0x224/0x3f4 [ 82.467037] driver_probe_device+0x70/0x1c4 [ 82.471716] bus_for_each_drv+0x44/0x8c [ 82.476049] __device_attach+0xa0/0x138 [ 82.480382] bus_probe_device+0x88/0x90 [ 82.484715] deferred_probe_work_func+0x6c/0xbc [ 82.489741] process_one_work+0x200/0x740 [ 82.494246] worker_thread+0x2c/0x4c8 [ 82.498408] kthread+0x128/0x164 [ 82.502131] ret_from_fork+0x14/0x20 [ 82.506204] (null) [ 82.508976] [ 82.508976] -> #0 (prepare_lock){+.+.}: [ 82.514264] __mutex_lock+0x60/0xa3c [ 82.518336] mutex_lock_nested+0x1c/0x24 [ 82.522756] clk_prepare_lock+0x78/0xec [ 82.527088] clk_core_get_rate+0xc/0x5c [ 82.531421] i2s_trigger+0x490/0x6d4 [ 82.535494] soc_pcm_trigger+0x100/0x140 [ 82.539913] snd_pcm_do_start+0x2c/0x30 [ 82.544246] snd_pcm_action_single+0x38/0x78 [ 82.549012] snd_pcm_ioctl+0x910/0x1268 [ 82.553345] do_vfs_ioctl+0x90/0x9ec [ 82.557417] ksys_ioctl+0x34/0x60 [ 82.561229] ret_fast_syscall+0x0/0x28 [ 82.565477] 0xbeea384c [ 82.568421] [ 82.568421] other info that might help us debug this: [ 82.568421] [ 82.576394] Possible unsafe locking scenario: [ 82.576394] [ 82.582285] CPU0 CPU1 [ 82.586792] ---- ---- [ 82.591297] lock(&(&pri_dai->spinlock)->rlock); [ 82.595977] lock(prepare_lock); [ 82.601782] lock(&(&pri_dai->spinlock)->rlock); [ 82.608975] lock(prepare_lock); [ 82.612268] [ 82.612268] *** DEADLOCK *** Fixes: 647d04f8 ("ASoC: samsung: i2s: Ensure the RCLK rate is properly determined") Reported-by:
Krzysztof Kozłowski <krzk@kernel.org> Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
James Morse authored
[ Upstream commit 7d826029 ] On systems with VHE the kernel and KVM's world-switch code run at the same exception level. Code that is only used on a VHE system does not need to be annotated as __hyp_text as it can reside anywhere in the kernel text. __hyp_text was also used to prevent kprobes from patching breakpoint instructions into this region, as this code runs at a different exception level. While this is no longer true with VHE, KVM still switches VBAR_EL1, meaning a kprobe's breakpoint executed in the world-switch code will cause a hyp-panic. echo "p:weasel sysreg_save_guest_state_vhe" > /sys/kernel/debug/tracing/kprobe_events echo 1 > /sys/kernel/debug/tracing/events/kprobes/weasel/enable lkvm run -k /boot/Image --console serial -p "console=ttyS0 earlycon=uart,mmio,0x3f8" # lkvm run -k /boot/Image -m 384 -c 3 --name guest-1474 Info: Placing fdt at 0x8fe00000 - 0x8fffffff Info: virtio-mmio.devices=0x200@0x10000:36 Info: virtio-mmio.devices=0x200@0x10200:37 Info: virtio-mmio.devices=0x200@0x10400:38 [ 614.178186] Kernel panic - not syncing: HYP panic: [ 614.178186] PS:404003c9 PC:ffff0000100d70e0 ESR:f2000004 [ 614.178186] FAR:0000000080080000 HPFAR:0000000000800800 PAR:1d00007edbadc0de [ 614.178186] VCPU:00000000f8de32f1 [ 614.178383] CPU: 2 PID: 1482 Comm: kvm-vcpu-0 Not tainted 5.0.0-rc2 #10799 [ 614.178446] Call trace: [ 614.178480] dump_backtrace+0x0/0x148 [ 614.178567] show_stack+0x24/0x30 [ 614.178658] dump_stack+0x90/0xb4 [ 614.178710] panic+0x13c/0x2d8 [ 614.178793] hyp_panic+0xac/0xd8 [ 614.178880] kvm_vcpu_run_vhe+0x9c/0xe0 [ 614.178958] kvm_arch_vcpu_ioctl_run+0x454/0x798 [ 614.179038] kvm_vcpu_ioctl+0x360/0x898 [ 614.179087] do_vfs_ioctl+0xc4/0x858 [ 614.179174] ksys_ioctl+0x84/0xb8 [ 614.179261] __arm64_sys_ioctl+0x28/0x38 [ 614.179348] el0_svc_common+0x94/0x108 [ 614.179401] el0_svc_handler+0x38/0x78 [ 614.179487] el0_svc+0x8/0xc [ 614.179558] SMP: stopping secondary CPUs [ 614.179661] Kernel Offset: disabled [ 614.179695] CPU features: 0x003,2a80aa38 [ 614.179758] Memory Limit: none [ 614.179858] ---[ end Kernel panic - not syncing: HYP panic: [ 614.179858] PS:404003c9 PC:ffff0000100d70e0 ESR:f2000004 [ 614.179858] FAR:0000000080080000 HPFAR:0000000000800800 PAR:1d00007edbadc0de [ 614.179858] VCPU:00000000f8de32f1 ]--- Annotate the VHE world-switch functions that aren't marked __hyp_text using NOKPROBE_SYMBOL(). Signed-off-by:
James Morse <james.morse@arm.com> Fixes: 3f5c90b8 ("KVM: arm64: Introduce VHE-specific kvm_vcpu_run") Acked-by:
Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by:
-
Christoffer Dall authored
[ Upstream commit ab2d5eb0 ] We currently initialize the group of private IRQs during kvm_vgic_vcpu_init, and the value of the group depends on the GIC model we are emulating. However, CPUs created before creating (and initializing) the VGIC might end up with the wrong group if the VGIC is created as GICv3 later. Since we have no enforced ordering of creating the VGIC and creating VCPUs, we can end up with part the VCPUs being properly intialized and the remaining incorrectly initialized. That also means that we have no single place to do the per-cpu data structure initialization which depends on knowing the emulated GIC model (which is only the group field). This patch removes the incorrect comment from kvm_vgic_vcpu_init and initializes the group of all previously created VCPUs's private interrupts in vgic_init in addition to the existing initialization in kvm_vgic_vcpu_init. Signed-off-by:
Christoffer Dall <christoffer.dall@arm.com> Signed-off-by:
-
