- 24 Sep, 2016 40 commits
-
-
Al Viro authored
commit 2e29f50a upstream. a) should not leave crap on fault b) should _not_ require access_ok() in any cases. Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Al Viro authored
commit c6852389 upstream. It could be done in exception-handling bits in __get_user_b() et.al., but the surgery involved would take more knowledge of sh64 details than I have or _want_ to have. Signed-off-by:
-
Al Viro authored
commit c90a3bc5 upstream. Signed-off-by:
-
Al Viro authored
commit 43403eab upstream. Signed-off-by:
-
Al Viro authored
commit 1c109fab upstream. get_user_ex(x, ptr) should zero x on failure. It's not a lot of a leak (at most we are leaking uninitialized 64bit value off the kernel stack, and in a fairly constrained situation, at that), but the fix is trivial, so... Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Al Viro authored
commit d0cf3851 upstream. Signed-off-by:
-
Al Viro authored
commit 8630c322 upstream. really ugly, but apparently avr32 compilers turns access_ok() into something so bad that they want it in assembler. Left that way, zeroing added in inline wrapper. Signed-off-by:
-
Al Viro authored
commit e98b9e37 upstream. Signed-off-by:
-
Al Viro authored
commit d4690f1e upstream. ... by turning it into what used to be multipages counterpart Signed-off-by:
-
Boris Brezillon authored
commit 5eb0d6eb upstream. aic5_irq_domain_xlate() and aic_irq_domain_xlate() take the generic chip lock without disabling interrupts, which can lead to a deadlock if an interrupt occurs while the lock is held in one of these functions. Replace irq_gc_{lock,unlock}() calls by irq_gc_{lock_irqsave,unlock_irqrestore}() ones to prevent this bug from happening. Fixes: b1479ebb ("irqchip: atmel-aic: Add atmel AIC/AIC5 drivers") Signed-off-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by:
Marc Zyngier <marc.zyngier@arm.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> Link: http://lkml.kernel.org/r/1473775109-4192-2-git-send-email-boris.brezillon@free-electrons.comSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Boris Brezillon authored
commit ebf9ff75 upstream. Some irqchip drivers need to take the generic chip lock outside of the irq context. Provide the irq_gc_{lock_irqsave,unlock_irqrestore}() helpers to allow one to disable irqs while entering a critical section protected by gc->lock. Note that we do not provide optimized version of these helpers for !SMP, because they are not called from the hot-path. [ tglx: Added a comment when these helpers should be [not] used ] Signed-off-by:
-
Lee Jones authored
commit 3ae50f45 upstream. Some ST platforms contain interconnect (ICN) clocks which must be handed correctly in order to obtain full functionality of a given IP. In this case, if the ICN clocks are not handled properly by the ST SDHCI driver MMC will break and the following output can be observed: [ 13.916949] mmc0: Timeout waiting for hardware interrupt. [ 13.922349] sdhci: =========== REGISTER DUMP (mmc0)=========== [ 13.928175] sdhci: Sys addr: 0x00000000 | Version: 0x00001002 [ 13.933999] sdhci: Blk size: 0x00007040 | Blk cnt: 0x00000001 [ 13.939825] sdhci: Argument: 0x00fffff0 | Trn mode: 0x00000013 [ 13.945650] sdhci: Present: 0x1fff0206 | Host ctl: 0x00000011 [ 13.951475] sdhci: Power: 0x0000000f | Blk gap: 0x00000080 [ 13.957300] sdhci: Wake-up: 0x00000000 | Clock: 0x00003f07 [ 13.963126] sdhci: Timeout: 0x00000004 | Int stat: 0x00000000 [ 13.968952] sdhci: Int enab: 0x02ff008b | Sig enab: 0x02ff008b [ 13.974777] sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000 [ 13.980602] sdhci: Caps: 0x21ed3281 | Caps_1: 0x00000000 [ 13.986428] sdhci: Cmd: 0x0000063a | Max curr: 0x00000000 [ 13.992252] sdhci: Host ctl2: 0x00000000 [ 13.996166] sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x7c048200 [ 14.001990] sdhci: =========================================== [ 14.009802] mmc0: Got data interrupt 0x02000000 even though no data operation was in progress. A decent point was raised about minimising the use of a local variable that we 'could' do without. I've chosen consistency over the possibility of reducing the local variable count by 1. Thinking that it's more important for the code to be grouped and authoured in a similar manner/style for greater maintainability/readability. Tested-by:
Peter Griffin <peter.griffin@linaro.org> Signed-off-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Chuck Lever authored
commit bf2c4b6f upstream. rsc_lookup steals the passed-in memory to avoid doing an allocation of its own, so we can't just pass in a pointer to memory that someone else is using. If we really want to avoid allocation there then maybe we should preallocate somwhere, or reference count these handles. For now we should revert. On occasion I see this on my server: kernel: kernel BUG at /home/cel/src/linux/linux-2.6/mm/slub.c:3851! kernel: invalid opcode: 0000 [#1] SMP kernel: Modules linked in: cts rpcsec_gss_krb5 sb_edac edac_core x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel lrw gf128mul glue_helper ablk_helper cryptd btrfs xor iTCO_wdt iTCO_vendor_support raid6_pq pcspkr i2c_i801 i2c_smbus lpc_ich mfd_core mei_me sg mei shpchp wmi ioatdma ipmi_si ipmi_msghandler acpi_pad acpi_power_meter rpcrdma ib_ipoib rdma_ucm ib_ucm ib_uverbs ib_umad rdma_cm ib_cm iw_cm nfsd nfs_acl lockd grace auth_rpcgss sunrpc ip_tables xfs libcrc32c mlx4_ib mlx4_en ib_core sr_mod cdrom sd_mod ast drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm drm crc32c_intel igb mlx4_core ahci libahci libata ptp pps_core dca i2c_algo_bit i2c_core dm_mirror dm_region_hash dm_log dm_mod kernel: CPU: 7 PID: 145 Comm: kworker/7:2 Not tainted 4.8.0-rc4-00006-g9d06b0b #15 kernel: Hardware name: Supermicro Super Server/X10SRL-F, BIOS 1.0c 09/09/2015 kernel: Workqueue: events do_cache_clean [sunrpc] kernel: task: ffff8808541d8000 task.stack: ffff880854344000 kernel: RIP: 0010:[<ffffffff811e7075>] [<ffffffff811e7075>] kfree+0x155/0x180 kernel: RSP: 0018:ffff880854347d70 EFLAGS: 00010246 kernel: RAX: ffffea0020fe7660 RBX: ffff88083f9db064 RCX: 146ff0f9d5ec5600 kernel: RDX: 000077ff80000000 RSI: ffff880853f01500 RDI: ffff88083f9db064 kernel: RBP: ffff880854347d88 R08: ffff8808594ee000 R09: ffff88087fdd8780 kernel: R10: 0000000000000000 R11: ffffea0020fe76c0 R12: ffff880853f01500 kernel: R13: ffffffffa013cf76 R14: ffffffffa013cff0 R15: ffffffffa04253a0 kernel: FS: 0000000000000000(0000) GS:ffff88087fdc0000(0000) knlGS:0000000000000000 kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 kernel: CR2: 00007fed60b020c3 CR3: 0000000001c06000 CR4: 00000000001406e0 kernel: Stack: kernel: ffff8808589f2f00 ffff880853f01500 0000000000000001 ffff880854347da0 kernel: ffffffffa013cf76 ffff8808589f2f00 ffff880854347db8 ffffffffa013d006 kernel: ffff8808589f2f20 ffff880854347e00 ffffffffa0406f60 0000000057c7044f kernel: Call Trace: kernel: [<ffffffffa013cf76>] rsc_free+0x16/0x90 [auth_rpcgss] kernel: [<ffffffffa013d006>] rsc_put+0x16/0x30 [auth_rpcgss] kernel: [<ffffffffa0406f60>] cache_clean+0x2e0/0x300 [sunrpc] kernel: [<ffffffffa04073ee>] do_cache_clean+0xe/0x70 [sunrpc] kernel: [<ffffffff8109a70f>] process_one_work+0x1ff/0x3b0 kernel: [<ffffffff8109b15c>] worker_thread+0x2bc/0x4a0 kernel: [<ffffffff8109aea0>] ? rescuer_thread+0x3a0/0x3a0 kernel: [<ffffffff810a0ba4>] kthread+0xe4/0xf0 kernel: [<ffffffff8169c47f>] ret_from_fork+0x1f/0x40 kernel: [<ffffffff810a0ac0>] ? kthread_stop+0x110/0x110 kernel: Code: f7 ff ff eb 3b 65 8b 05 da 30 e2 7e 89 c0 48 0f a3 05 a0 38 b8 00 0f 92 c0 84 c0 0f 85 d1 fe ff ff 0f 1f 44 00 00 e9 f5 fe ff ff <0f> 0b 49 8b 03 31 f6 f6 c4 40 0f 85 62 ff ff ff e9 61 ff ff ff kernel: RIP [<ffffffff811e7075>] kfree+0x155/0x180 kernel: RSP <ffff880854347d70> kernel: ---[ end trace 3fdec044969def26 ]--- It seems to be most common after a server reboot where a client has been using a Kerberos mount, and reconnects to continue its workload. Signed-off-by:
Chuck Lever <chuck.lever@oracle.com> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
Kristian H. Kristensen authored
commit 47a66e45 upstream. Similar to struct drm_update_draw, struct drm_mode_fb_cmd2 has an unaligned 64 bit field (modifier). This get packed differently between 32 bit and 64 bit modes on architectures that can handle unaligned 64 bit access (X86 and IA64). Other architectures pack the structs the same and don't need the compat wrapper. Use the same condition for drm_mode_fb_cmd2 as we use for drm_update_draw. Note that only the modifier will be packed differently between compat and non-compat versions. Reviewed-by:
Rob Clark <robdclark@gmail.com> Signed-off-by:
Kristian H. Kristensen <hoegsberg@chromium.org> [seanpaul added not at bottom of commit msg re: modifier] Signed-off-by:
Sean Paul <seanpaul@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/1473801645-116011-1-git-send-email-hoegsberg@chromium.orgSigned-off-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Ville Syrjälä authored
commit ea54ff40 upstream. Turns out commit a0562819 ("drm/i915: Get panel_type from OpRegion panel details") has regressed quite a few machines. So it looks like we can't use the panel type from OpRegion on all systems, and yet we absolutely must use it on some specific systems. Despite trying, I was unable to find any automagic way to determine if the OpRegion panel type is respectable or not. The only glimmer of hope I had was bit 8 in the SCIC response, but that turned out to not work either (it was always 0 on both types of systems). So, to fix the regressions without breaking the machine we know to need the OpRegion panel type, let's just add a quirk for this. Only specific machines known to require the OpRegion panel type will therefore use it. Everyone else will fall bck to the VBT panel type. The only known machine so far is a "Conrac GmbH IX45GM2". The PCI subsystem ID on this machine is just a generic 8086:2a42, so of no use. Instead we'll go with a DMI match. I suspect we can now also revert commit aeddda06 ("drm/i915: Ignore panel type from OpRegion on SKL") but let's leave that to a separate patch. v2: Do the DMI match in the opregion code directly, as dev_priv->quirks gets populated too late Cc: Rob Kramer <rob@solution-space.com> Cc: Martin van Es <martin@mrvanes.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Dave Airlie <airlied@linux.ie> Cc: Marco Krüger <krgsch@gmail.com> Cc: Sean Greenslade <sean@seangreenslade.com> Cc: Trudy Tective <bertslany@gmail.com> Cc: Robin Müller <rm1990@gmx.de> Cc: Alexander Kobel <a-kobel@a-kobel.de> Cc: Alexey Shumitsky <alexey.shumitsky@gmail.com> Cc: Emil Andersen Lauridsen <mine809@gmail.com> Cc: oceans112@gmail.com Cc: James Hogan <james@albanarts.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> References: https://lists.freedesktop.org/archives/intel-gfx/2016-August/105545.html References: https://lists.freedesktop.org/archives/dri-devel/2016-August/116888.html References: https://lists.freedesktop.org/archives/intel-gfx/2016-June/098826.html Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94825 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97060 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97443 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97363 Fixes: a0562819 ("drm/i915: Get panel_type from OpRegion panel details") Tested-by:
Marco Krüger <krgsch@gmail.com> Tested-by:
Alexey Shumitsky <alexey.shumitsky@gmail.com> Tested-by:
Sean Greenslade <sean@seangreenslade.com> Tested-by:
Emil Andersen Lauridsen <mine809@gmail.com> Tested-by:
Robin Müller <rm1990@gmx.de> Tested-by: oceans112@gmail.com Tested-by:
Rob Kramer <rob@solution-space.com> Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1473758539-21565-1-git-send-email-ville.syrjala@linux.intel.com References: http://patchwork.freedesktop.org/patch/msgid/1473602239-15855-1-git-send-email-adrienverge@gmail.comAcked-by:
Jani Nikula <jani.nikula@intel.com> (cherry picked from commit c8ebfad7) Signed-off-by:
-
Jan Leupold authored
commit d31ed3f0 upstream. The code is applying the same scaling for the X and Y components, thus making the scaling feature only functional when both components have the same scaling factor. Do the s/_w/_h/ replacement where appropriate to fix vertical scaling. Signed-off-by:
Jan Leupold <leupold@rsi-elektrotechnik.de> Fixes: 1a396789 ("drm: add Atmel HLCDC Display Controller support") Signed-off-by:
-
Arnd Bergmann authored
commit 236dec05 upstream. Using "make tinyconfig" produces a couple of annoying warnings that show up for build test machines all the time: .config:966:warning: override: NOHIGHMEM changes choice state .config:965:warning: override: SLOB changes choice state .config:963:warning: override: KERNEL_XZ changes choice state .config:962:warning: override: CC_OPTIMIZE_FOR_SIZE changes choice state .config:933:warning: override: SLOB changes choice state .config:930:warning: override: CC_OPTIMIZE_FOR_SIZE changes choice state .config:870:warning: override: SLOB changes choice state .config:868:warning: override: KERNEL_XZ changes choice state .config:867:warning: override: CC_OPTIMIZE_FOR_SIZE changes choice state I've made a previous attempt at fixing them and we discussed a number of alternatives. I tried changing the Makefile to use "merge_config.sh -n $(fragment-list)" but couldn't get that to work properly. This is yet another approach, based on the observation that we do want to see a warning for conflicting 'choice' options, and that we can simply make them non-conflicting by listing all other options as disabled. This is a trivial patch that we can apply independent of plans for other changes. Link: http://lkml.kernel.org/r/20160829214952.1334674-2-arnd@arndb.de Link: https://storage.kernelci.org/mainline/v4.7-rc6/x86-tinyconfig/build.log https://patchwork.kernel.org/patch/9212749/Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Reviewed-by:
Josh Triplett <josh@joshtriplett.org> Reviewed-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Mike Danese authored
commit 3610a2ad upstream. The compilation emits a warning in function ‘snprintf’, inlined from ‘set_cmdline’ at ../Documentation/mic/mpssd/mpssd.c:1541:9: /usr/include/x86_64-linux-gnu/bits/stdio2.h:64:10: warning: call to __builtin___snprintf_chk will always overflow destination buffer This was introduced in commit f4a66c20 ("misc: mic: Update MIC host daemon with COSM changes") and is fixed by reverting the changes to the size argument of these snprintf statements. Cc: Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by:
Mike Danese <mikedanese@google.com> Signed-off-by:
Jonathan Corbet <corbet@lwn.net> Signed-off-by:
-
Christophe Leroy authored
commit 8540571e upstream. Commit 7aef4136 ("powerpc32: rewrite csum_partial_copy_generic() based on copy_tofrom_user()") introduced a bug when destination address is odd and len is lower than cacheline size. In that case the resulting csum value doesn't have to be rotated one byte because the cache-aligned copy part is skipped so no alignment is performed. Fixes: 7aef4136 ("powerpc32: rewrite csum_partial_copy_generic() based on copy_tofrom_user()") Cc: stable@vger.kernel.org # v4.6+ Reported-by:
Alessio Igor Bogani <alessio.bogani@elettra.eu> Signed-off-by:
Christophe Leroy <christophe.leroy@c-s.fr> Tested-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Christophe Leroy authored
commit 1bc8b816 upstream. Commit 7aef4136 ("powerpc32: rewrite csum_partial_copy_generic() based on copy_tofrom_user()") introduced a bug when destination address is odd and initial csum is not null In that (rare) case the initial csum value has to be rotated one byte as well as the resulting value is This patch also fixes related comments Fixes: 7aef4136 ("powerpc32: rewrite csum_partial_copy_generic() based on copy_tofrom_user()") Signed-off-by:
-
Jeffrey Hugo authored
commit d6493401 upstream. The eboot code directly calls ExitBootServices. This is inadvisable as the UEFI spec details a complex set of errors, race conditions, and API interactions that the caller of ExitBootServices must get correct. The eboot code attempts allocations after calling ExitBootSerives which is not permitted per the spec. Call the efi_exit_boot_services() helper intead, which handles the allocation scenario properly. Signed-off-by:
Jeffrey Hugo <jhugo@codeaurora.org> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Leif Lindholm <leif.lindholm@linaro.org> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by:
Matt Fleming <matt@codeblueprint.co.uk> Signed-off-by:
-
Jeffrey Hugo authored
commit ed9cc156 upstream. The FDT code directly calls ExitBootServices. This is inadvisable as the UEFI spec details a complex set of errors, race conditions, and API interactions that the caller of ExitBootServices must get correct. The FDT code does not handle EFI_INVALID_PARAMETER as required by the spec, which causes intermittent boot failures on the Qualcomm Technologies QDF2432. Call the efi_exit_boot_services() helper intead, which handles the EFI_INVALID_PARAMETER scenario properly. Signed-off-by:
-
Jeffrey Hugo authored
commit fc07716b upstream. The spec allows ExitBootServices to fail with EFI_INVALID_PARAMETER if a race condition has occurred where the EFI has updated the memory map after the stub grabbed a reference to the map. The spec defines a retry proceedure with specific requirements to handle this scenario. This scenario was previously observed on x86 - commit d3768d88 ("x86, efi: retry ExitBootServices() on failure") but the current fix is not spec compliant and the scenario is now observed on the Qualcomm Technologies QDF2432 via the FDT stub which does not handle the error and thus causes boot failures. The user will notice the boot failure as the kernel is not executed and the system may drop back to a UEFI shell, but will be unresponsive to input and the system will require a power cycle to recover. Add a helper to the stub library that correctly adheres to the spec in the case of EFI_INVALID_PARAMETER from ExitBootServices and can be universally used across all stub implementations. Signed-off-by:
-
Jeffrey Hugo authored
commit dadb57ab upstream. efi_get_memory_map() allocates a buffer to store the memory map that it retrieves. This buffer may need to be reused by the client after ExitBootServices() is called, at which point allocations are not longer permitted. To support this usecase, provide the allocated buffer size back to the client, and allocate some additional headroom to account for any reasonable growth in the map that is likely to happen between the call to efi_get_memory_map() and the client reusing the buffer. Signed-off-by:
-
Jan Beulich authored
commit d4c4fed0 upstream. While commit 55f1ea15 ("efi: Fix for_each_efi_memory_desc_in_map() for empty memmaps") made an attempt to deal with empty memory maps, it didn't address the case where the map field never gets set, as is apparently the case when running under Xen. Reported-by: <lists@ssl-mail.com> Tested-by: <lists@ssl-mail.com> Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by:
Jan Beulich <jbeulich@suse.com> [ Guard the loop with a NULL check instead of pointer underflow ] Signed-off-by:
-
Eli Cooper authored
commit ab343801 upstream. Commit 8eb30be0 ("ipv6: Create ip6_tnl_xmit") unsets flowi6_proto in ip4ip6_tnl_xmit() and ip6ip6_tnl_xmit(). Since xfrm_selector_match() relies on this info, IPv6 packets sent by an ip6tunnel cannot be properly selected by their protocols after removing it. This patch puts flowi6_proto back. Fixes: 8eb30be0 ("ipv6: Create ip6_tnl_xmit") Signed-off-by:
Eli Cooper <elicooper@gmx.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Balbir Singh authored
commit 135e8c92 upstream. The origin of the issue I've seen is related to a missing memory barrier between check for task->state and the check for task->on_rq. The task being woken up is already awake from a schedule() and is doing the following: do { schedule() set_current_state(TASK_(UN)INTERRUPTIBLE); } while (!cond); The waker, actually gets stuck doing the following in try_to_wake_up(): while (p->on_cpu) cpu_relax(); Analysis: The instance I've seen involves the following race: CPU1 CPU2 while () { if (cond) break; do { schedule(); set_current_state(TASK_UN..) } while (!cond); wakeup_routine() spin_lock_irqsave(wait_lock) raw_spin_lock_irqsave(wait_lock) wake_up_process() } try_to_wake_up() set_current_state(TASK_RUNNING); .. list_del(&waiter.list); CPU2 wakes up CPU1, but before it can get the wait_lock and set current state to TASK_RUNNING the following occurs: CPU3 wakeup_routine() raw_spin_lock_irqsave(wait_lock) if (!list_empty) wake_up_process() try_to_wake_up() raw_spin_lock_irqsave(p->pi_lock) .. if (p->on_rq && ttwu_wakeup()) .. while (p->on_cpu) cpu_relax() .. CPU3 tries to wake up the task on CPU1 again since it finds it on the wait_queue, CPU1 is spinning on wait_lock, but immediately after CPU2, CPU3 got it. CPU3 checks the state of p on CPU1, it is TASK_UNINTERRUPTIBLE and the task is spinning on the wait_lock. Interestingly since p->on_rq is checked under pi_lock, I've noticed that try_to_wake_up() finds p->on_rq to be 0. This was the most confusing bit of the analysis, but p->on_rq is changed under runqueue lock, rq_lock, the p->on_rq check is not reliable without this fix IMHO. The race is visible (based on the analysis) only when ttwu_queue() does a remote wakeup via ttwu_queue_remote. In which case the p->on_rq change is not done uder the pi_lock. The result is that after a while the entire system locks up on the raw_spin_irqlock_save(wait_lock) and the holder spins infintely Reproduction of the issue: The issue can be reproduced after a long run on my system with 80 threads and having to tweak available memory to very low and running memory stress-ng mmapfork test. It usually takes a long time to reproduce. I am trying to work on a test case that can reproduce the issue faster, but thats work in progress. I am still testing the changes on my still in a loop and the tests seem OK thus far. Big thanks to Benjamin and Nick for helping debug this as well. Ben helped catch the missing barrier, Nick caught every missing bit in my theory. Signed-off-by:
Balbir Singh <bsingharora@gmail.com> [ Updated comment to clarify matching barriers. Many architectures do not have a full barrier in switch_to() so that cannot be relied upon. ] Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Alexey Kardashevskiy <aik@ozlabs.ru> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Nicholas Piggin <nicholas.piggin@gmail.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/e02cce7b-d9ca-1ad0-7a61-ea97c7582b37@gmail.comSigned-off-by:
-
Johannes Berg authored
commit 4d0bd46a upstream. This reverts commit 3d5fdff4. Ben Hutchings pointed out that the commit isn't safe since it assumes that the structure used by the driver is iw_point, when in fact there's no way to know about that. Fortunately, the only driver in the tree that ever runs this code path is the wilc1000 staging driver, so it doesn't really matter. Clearly I should have investigated this better before applying, sorry. Reported-by:
Ben Hutchings <ben@decadent.org.uk> Fixes: 3d5fdff4 ("wext: Fix 32 bit iwpriv compatibility issue with 64 bit Kernel") Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Alexander Shishkin authored
commit 1155bafc upstream. Right now, the kernel address filters in PT are prone to integer overflow that may happen in adding filter's size to its offset to obtain the end of the range. Such an overflow would also throw a #GP in the PT event configuration path. Fix this by explicitly validating the result of this calculation. Reported-by:
Adrian Hunter <adrian.hunter@intel.com> Signed-off-by:
Alexander Shishkin <alexander.shishkin@linux.intel.com> Acked-by:
-
Alexander Shishkin authored
commit ddfdad99 upstream. The kernel_ip() filter is used mostly by the DS/LBR code to look at the branch addresses, but Intel PT also uses it to validate the address filter offsets for kernel addresses, for which it is not sufficient: supplying something in bits 64:48 that's not a sign extension of the lower address bits (like 0xf00d000000000000) throws a #GP. This patch adds address validation for the user supplied kernel filters. Reported-by:
-
Alexander Shishkin authored
commit 95f60084 upstream. PT address filter configuration requires that a range is specified by its first and last address, but at the moment we're obtaining the end of the range by adding user specified size to its start, which is off by one from what it actually needs to be. Fix this and make sure that zero-sized filters don't pass the filter validation. Reported-by:
-
Matt Fleming authored
commit 080fe0b7 upstream. While the Intel PMU monitors the LLC when perf enables the HW_CACHE_REFERENCES and HW_CACHE_MISSES events, these events monitor L1 instruction cache fetches (0x0080) and instruction cache misses (0x0081) on the AMD PMU. This is extremely confusing when monitoring the same workload across Intel and AMD machines, since parameters like, $ perf stat -e cache-references,cache-misses measure completely different things. Instead, make the AMD PMU measure instruction/data cache and TLB fill requests to the L2 and instruction/data cache and TLB misses in the L2 when HW_CACHE_REFERENCES and HW_CACHE_MISSES are enabled, respectively. That way the events measure unified caches on both platforms. Signed-off-by:
-
Jiri Olsa authored
commit 79d102cb upstream. Yanqiu Zhang reported kernel panic when using mbm event on system where CQM is detected but without mbm event support, like with perf: # perf stat -e 'intel_cqm/event=3/' -a BUG: unable to handle kernel NULL pointer dereference at 0000000000000020 IP: [<ffffffff8100d64c>] update_sample+0xbc/0xe0 ... <IRQ> [<ffffffff8100d688>] __intel_mbm_event_init+0x18/0x20 [<ffffffff81113d6b>] flush_smp_call_function_queue+0x7b/0x160 [<ffffffff81114853>] generic_smp_call_function_single_interrupt+0x13/0x60 [<ffffffff81052017>] smp_call_function_interrupt+0x27/0x40 [<ffffffff816fb06c>] call_function_interrupt+0x8c/0xa0 ... The reason is that we currently allow to init mbm event even if mbm support is not detected. Adding checks for both cqm and mbm events and support into cqm's event_init. Fixes: 33c3cc7a ("perf/x86/mbm: Add Intel Memory B/W Monitoring enumeration and init") Reported-by:
Yanqiu Zhang <yanqzhan@redhat.com> Signed-off-by:
Jiri Olsa <jolsa@redhat.com> Acked-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Vikas Shivappa <vikas.shivappa@linux.intel.com> Cc: Tony Luck <tony.luck@intel.com> Link: http://lkml.kernel.org/r/1473089407-21857-1-git-send-email-jolsa@kernel.orgSigned-off-by:
-
Peter Zijlstra authored
commit 8ef9b845 upstream. Alexander hit the WARN_ON_ONCE(!event) on his Skylake while running the perf fuzzer. This means the PEBSv3 record included a status bit for an inactive event, something that _should_ not happen. Move the code that filters the status bits against our known PEBS events up a spot to guarantee we only deal with events we know about. Further add "continue" statements to the WARN_ON_ONCE()s such that we'll not die nor generate silly events in case we ever do hit them again. Reported-by:
-
Giedrius Statkevičius authored
commit e34f2ff4 upstream. A regression was introduced in commit id 79d4db12 ("ath9k: cleanup led_pin initial") that broken the WLAN status led on my laptop with AR9287 after suspending and resuming. Steps to reproduce: * Suspend (laptop) * Resume (laptop) * Observe that the WLAN led no longer turns ON/OFF depending on the status and is always red Even though for my case it only needs to be set to OUT in ath9k_start but for consistency bring back the IN direction setting as well. Fixes: 79d4db12 ("ath9k: cleanup led_pin initial") Cc: Miaoqing Pan <miaoqing@codeaurora.org> Cc: Kalle Valo <kvalo@qca.qualcomm.com> Link: https://bugzilla.kernel.org/show_bug.cgi?id=151711Signed-off-by:
Giedrius Statkevičius <giedrius.statkevicius@gmail.com> [kvalo@qca.qualcomm.com: improve commit log] Signed-off-by:
Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by:
-
Felix Fietkau authored
commit 7711aaf0 upstream. A station pointer can be passed to the driver on tx, before it has been marked as associated. Since ath9k_sta_state was initializing the entry too late, it resulted in some spurious crashes. Fixes: df3c6eb3 ("ath9k: Use sta_state() callback") Signed-off-by:
Felix Fietkau <nbd@nbd.name> Signed-off-by:
-
Guoqing Jiang authored
commit 47a7b0d8 upstream. The md-cluster is compiled as module by default, if it is compiled by built-in way, then we can't make md-cluster works. [64782.630008] md/raid1:md127: active with 2 out of 2 mirrors [64782.630528] md-cluster module not found. [64782.630530] md127: Could not setup cluster service (-2) Fixes: edb39c9d ("Introduce md_cluster_operations to handle cluster functions") Reported-by:
Marc Smith <marc.smith@mcc.edu> Reviewed-by:
NeilBrown <neilb@suse.com> Signed-off-by:
Guoqing Jiang <gqjiang@suse.com> Signed-off-by:
Shaohua Li <shli@fb.com> Signed-off-by:
-
Arend Van Spriel authored
commit ded89912 upstream. User-space can choose to omit NL80211_ATTR_SSID and only provide raw IE TLV data. When doing so it can provide SSID IE with length exceeding the allowed size. The driver further processes this IE copying it into a local variable without checking the length. Hence stack can be corrupted and used as exploit. Reported-by:
Daxing Guo <freener.gdx@gmail.com> Reviewed-by:
Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by:
Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by:
Franky Lin <franky.lin@broadcom.com> Signed-off-by:
Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Mathias Nyman authored
commit bcf42aa6 upstream. The stop endpoint command has its own 5 second timeout timer. If the timeout function is triggered between USB3 and USB2 host removal it will try to call usb_hc_died(xhci_to_hcd(xhci)->primary_hcd) the ->primary_hcd will be set to NULL at USB3 hcd removal. Fix this by first checking if the PCI host is being removed, and also by using only xhci_to_hcd() as it will always return the primary hcd. Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
-
Miklos Szeredi authored
commit 8fba54ae upstream. When reading from a loop device backed by a fuse file it deadlocks on lock_page(). This is because the page is already locked by the read() operation done on the loop device. In this case we don't want to either lock the page or dirty it. So do what fs/direct-io.c does: only dirty the page for ITER_IOVEC vectors. Reported-by:
Sheng Yang <sheng@yasker.org> Fixes: aa4d8616 ("block: loop: switch to VFS ITER_BVEC") Signed-off-by:
Miklos Szeredi <mszeredi@redhat.com> Reviewed-by:
Ashish Samant <ashish.samant@oracle.com> Tested-by:
-
